Bug#726142: Realtek NIC (r8169 driver) won't work at gigabit speed, must be forced to 100MB
Package: linux-2.6
Version: 2.6.32-48squeeze4
Severity: important
This is a continuation of archived bug number 596390. The problem has
never been solved. I have a workaround that I consider unsatisfactory.
With everything set to auto-negotiate, and starting from a powered off
system, the NIC has link when the machine is powered up. As soon the
'network' init.d script is started, link goes away. The only way to
restore it is to completely power-cycle the system.
If I hard-set the speed to 100 and duplex to full with ethtool (which I
have been doing in both the pre-up and post-up settings, just to be
safe), then I can get link. At that point I also need to hard-set the
switchport, or the resulting duplex mismatch causes too many errors.
While hard-setting the speed and duplex does make my system functional,
it greatly limits the bandwidth between my server and the rest of the
computers on my network.
When I first encountered the bug, I was running lenny, and had just
upgraded the kernel from 2.6.30 (which worked perfectly) to 2.6.32.
I am currently running squeeze. On the current install, I have tried
upgrading the kernel to the 3.2.0 that's in squeeze-backports, with no
change. I had to revert that change - it was causing random lockups.
The NIC that's been in use for the last few years is built into the
mainboard. Recently I tried adding a PCI express NIC. This is also a
realtek nic, and uses the same kernel driver. The add-on NIC has the
exact same problem.
I have tried many different cables, both pre-manufactured and made
myself. I've tried different switchports. Unfortunately, I only own
one gigabit switch, a 12-port Cisco 3550.
A 32-bit Knoppix CD seems to have the same problem. I don't have the
DVD image downloaded yet, so I can't try the 64-bit Knoppix. A 64-bit
wheezy netinst image fails to find the firmware, and I didn't have a
convenient way of supplying it, so I'll have to try that again later.
What other info can I provide?
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze4)
(dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Sep
23 22:14:43 UTC 2013
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64
root=UUID=5e305485-d930-4059-95a4-95c8e3366674 ro quiet
** Not tainted
** Kernel log:
[ 3.991285] loop: module loaded
[ 4.071489] md: md1 stopped.
[ 4.096958] md: bind<sda1>
[ 4.109695] w83627ehf: Found W83627DHG-P chip at 0x290
[ 4.109818] w83627ehf w83627ehf.656: VID pins in output mode, CPU VID
not available
[ 4.110501] md: bind<sdb1>
[ 4.111423] raid1: raid set md1 active with 2 out of 2 mirrors
[ 4.111441] md1: detected capacity change from 0 to 501612544
[ 4.112826] md1: unknown partition table
[ 4.192332] md: md3 stopped.
[ 4.215807] md: bind<sda3>
[ 4.216088] md: bind<sdb3>
[ 4.217024] raid1: raid set md3 active with 2 out of 2 mirrors
[ 4.217040] md3: detected capacity change from 0 to 8003125248
[ 4.219025] md3: unknown partition table
[ 4.266491] md: md5 stopped.
[ 4.267826] md: bind<sda5>
[ 4.268088] md: bind<sdb5>
[ 4.269064] raid1: raid set md5 active with 2 out of 2 mirrors
[ 4.269082] md5: detected capacity change from 0 to 15998058496
[ 4.270120] md5: unknown partition table
[ 4.320400] md: md6 stopped.
[ 4.334193] md: bind<sda6>
[ 4.334507] md: bind<sdb6>
[ 4.335446] raid1: raid set md6 active with 2 out of 2 mirrors
[ 4.335465] md6: detected capacity change from 0 to 31996182528
[ 4.336415] md6: unknown partition table
[ 4.399227] md: md7 stopped.
[ 4.400577] md: bind<sda7>
[ 4.400827] md: bind<sdb7>
[ 4.401782] raid1: raid set md7 active with 2 out of 2 mirrors
[ 4.401801] md7: detected capacity change from 0 to 64000753664
[ 4.402673] md7: unknown partition table
[ 4.478534] md: md8 stopped.
[ 4.479951] md: bind<sda8>
[ 4.480214] md: bind<sdb8>
[ 4.481173] raid1: raid set md8 active with 2 out of 2 mirrors
[ 4.481192] md8: detected capacity change from 0 to 64000753664
[ 4.483293] md8: unknown partition table
[ 4.548745] md: md9 stopped.
[ 4.550439] md: bind<sda9>
[ 4.550716] md: bind<sdb9>
[ 4.551681] raid1: raid set md9 active with 2 out of 2 mirrors
[ 4.551703] md9: detected capacity change from 0 to 810699915264
[ 4.552552] md9: unknown partition table
[ 4.772775] Adding 7815544k swap on /dev/md3. Priority:-1 extents:1
across:7815544k
[ 5.528791] kjournald starting. Commit interval 5 seconds
[ 5.553447] EXT3 FS on md1, internal journal
[ 5.553451] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.753557] EXT4-fs (md8): mounted filesystem with ordered data mode
[ 5.819829] EXT4-fs (md5): mounted filesystem with ordered data mode
[ 5.863622] EXT4-fs (md6): mounted filesystem with ordered data mode
[ 5.893079] EXT4-fs (md7): mounted filesystem with ordered data mode
[ 6.018222] EXT4-fs (md9): mounted filesystem with ordered data mode
[ 8.136756] r8169 0000:02:00.0: eth0: link down
[ 8.138813] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 57.997976] fuse init (API version 7.13)
[ 59.445116] r8169 0000:02:00.0: eth0: link up
[ 59.447589] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 59.521190] r8169 0000:02:00.0: eth0: link down
[ 59.568632] powernow-k8: Found 1 AMD Phenom(tm) II X3 705e Processor
processors (3 cpu cores) (version 2.20.00)
[ 59.568643] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS
objects found.
[ 59.568644] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 65.499839] Bluetooth: Core ver 2.15
[ 65.500036] NET: Registered protocol family 31
[ 65.500038] Bluetooth: HCI device and connection manager initialized
[ 65.500041] Bluetooth: HCI socket layer initialized
[ 65.631135] Bluetooth: L2CAP ver 2.14
[ 65.631137] Bluetooth: L2CAP socket layer initialized
[ 65.694575] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 65.694578] Bluetooth: BNEP filters: protocol multicast
[ 65.750264] Bridge firewalling registered
[ 65.778001] Bluetooth: SCO (Voice Link) ver 0.6
[ 65.778004] Bluetooth: SCO socket layer initialized
[ 65.791421] Bluetooth: RFCOMM TTY layer initialized
[ 65.791424] Bluetooth: RFCOMM socket layer initialized
[ 65.791425] Bluetooth: RFCOMM ver 1.11
[ 66.079878] [drm] Setting GART location based on new memory map
[ 66.080226] [drm] Loading RS780 CP Microcode
[ 66.080229] platform r600_cp.0: firmware: requesting radeon/RS780_pfp.bin
[ 66.147003] platform r600_cp.0: firmware: requesting radeon/RS780_me.bin
[ 66.181469] [drm] Resetting GPU
[ 66.181525] [drm] writeback test succeeded in 1 usecs
[ 66.491096] lp: driver loaded but no devices found
[ 66.590822] ppdev: user-space parallel port driver
[ 70.208674] eth0: no IPv6 routers present
[ 76.341529] r8169 0000:02:00.0: eth0: link up
[ 76.478189] CPU0 attaching NULL sched-domain.
[ 76.478193] CPU1 attaching NULL sched-domain.
[ 76.478195] CPU2 attaching NULL sched-domain.
[ 76.504072] CPU0 attaching sched-domain:
[ 76.504075] domain 0: span 0-2 level MC
[ 76.504078] groups: group ffff88000c00fbf0 cpus 0 group
ffff88000c04fbf0 cpus 1 group ffff88000c08fbf0 cpus 2
[ 76.504085] CPU1 attaching sched-domain:
[ 76.504086] domain 0: span 0-2 level MC
[ 76.504088] groups: group ffff88000c04fbf0 cpus 1 group
ffff88000c08fbf0 cpus 2 group ffff88000c00fbf0 cpus 0
[ 76.504093] CPU2 attaching sched-domain:
[ 76.504095] domain 0: span 0-2 level MC
[ 76.504096] groups: group ffff88000c08fbf0 cpus 2 group
ffff88000c00fbf0 cpus 0 group ffff88000c04fbf0 cpus 1
[40674.000013] NOHZ: local_softirq_pending 100
** Model information
sys_vendor: To Be Filled By O.E.M.
product_name: To Be Filled By O.E.M.
product_version: To Be Filled By O.E.M.
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: P1.80
board_vendor: ASRock
board_name: M3A785GXH/128M
board_version:
** Loaded modules:
Module Size Used by
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
rfcomm 29605 0
sco 7225 2
bridge 39566 0
stp 1440 1 bridge
bnep 9395 2
l2cap 24800 4 rfcomm,bnep
bluetooth 41779 6 rfcomm,sco,bnep,l2cap
rfkill 12996 3 bluetooth
cpufreq_powersave 902 0
cpufreq_stats 2740 0
cpufreq_userspace 1960 0
cpufreq_conservative 5162 0
binfmt_misc 6415 1
fuse 50844 1
ext4 288211 5
jbd2 66951 1 ext4
crc16 1319 2 l2cap,ext4
w83627ehf 18691 0
hwmon_vid 1828 1 w83627ehf
firewire_sbp2 11466 0
loop 11767 0
radeon 574380 2
ttm 39986 1 radeon
drm_kms_helper 20337 1 radeon
drm 142928 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 4209 1 radeon
k10temp 2715 0
edac_core 29261 0
edac_mce_amd 6417 0
i2c_piix4 8328 0
psmouse 49937 0
i2c_core 15803 5
radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
shpchp 26248 0
joydev 8459 0
serio_raw 3752 0
evdev 7352 13
pcspkr 1699 0
pci_hotplug 21587 1 shpchp
wmi 4323 0
processor 29903 0
button 4650 0
ext3 106502 2
jbd 37157 1 ext3
mbcache 5050 2 ext4,ext3
raid1 18399 8
md_mod 73872 9 raid1
microcode 21547 0
usbhid 33196 0
hid 63241 1 usbhid
sd_mod 29889 18
crc_t10dif 1276 1 sd_mod
ata_generic 3239 0
ohci_hcd 19279 0
firewire_ohci 19628 0
ahci 32918 16
thermal 11674 0
thermal_sys 11942 2 processor,thermal
firewire_core 36752 2 firewire_sbp2,firewire_ohci
crc_itu_t 1307 1 firewire_core
pata_atiixp 3473 0
r8169 36712 0
mii 3210 1 r8169
ehci_hcd 31937 0
libata 133616 3 ata_generic,ahci,pata_atiixp
usbcore 123175 4 usbhid,ohci_hcd,ehci_hcd
nls_base 6567 1 usbcore
scsi_mod 126677 3 firewire_sbp2,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host
Bridge [1022:9601]
Subsystem: ASRock Incorporation Device [1849:9601]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: ASRock Incorporation Device [1849:9602]
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe700000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI
bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI
bridge (PCIE port 5) [1022:9609] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: ASRock Incorporation Device [1849:4391]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9000 [size=4]
Region 2: I/O ports at 8000 [size=8]
Region 3: I/O ports at 7000 [size=4]
Region 4: I/O ports at 6000 [size=16]
Region 5: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe6fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4398]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe6fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe6ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4397]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4398]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe6f7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI
Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASRock Incorporation Device [1849:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe6ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
[1002:4385] (rev 3c)
Subsystem: ASRock Incorporation Device [1849:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel modules: i2c-piix4
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE
Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation Device [1849:439c]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
Kernel modules: ata_generic, pata_atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host
controller [1002:439d]
Subsystem: ASRock Incorporation Device [1849:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge
[1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr+ DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASRock Incorporation Device [1849:4399]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe6f6000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel modules: amd64_edac_mod
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS880
[Radeon HD 4200] [1002:9710] (prog-if 00 [VGA controller])
Subsystem: ASRock Incorporation Device [1849:9710]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at b000 [size=256]
Region 2: Memory at fe8f0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe700000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel modules: radeon
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express
Gigabit Ethernet controller [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at fe9ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at fdfff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdff8000 (64-bit, prefetchable) [size=16K]
Expansion ROM at feae0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
04:07.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8
[Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10
[OHCI])
Subsystem: ASRock Incorporation Device [1849:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 32 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at e800 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
** Sound cards:
-- System Information:
Debian Release: 6.0.7
APT prefers oldstable-updates
APT policy: (500, 'oldstable-updates'), (500, 'oldstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/3 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration
management sy
ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an
initramfs
ii linux-base 3.4~bpo60+1 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-48squeeze4 Binary firmware for various
driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-64 GRand Unified Bootloader
(dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.28+squeeze1 Binary firmware for various
driver
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various
driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64:
false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64:
true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
Reply to: