Bug#715021: firmware-linux-nonfree: not correctly work Card Reader Broadcom NetXtreme BCM57765
Package: firmware-linux-nonfree
Version: 0.38
Severity: normal
$ lspci -nn
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10)
04:00.1 SD Host controller [0805]: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader [14e4:16bc] (rev 10)
inserted three times and waited no less than two minutes. then introduced the # rmmod tg3 and then again pulled out and inserted with the expectation of at least two minutes, then entered
# modprobe tg3! if (tg3 is a network driver, not an SD HCI driver.) why commands(# rmmod tg3# modprobe tg3) work?
see attach
# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-4) ) #1 SMP Debian 3.9.6-1
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=UUID=5e846022-c899-4548-a402-d0b2f70368ec ro acpi_backlight=vendor quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a6abefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a6abf000-0x00000000a6ebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer V5-171/Mimic , BIOS V1.09 10/30/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0A7000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0A8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask FC0000000 write-back
[ 0.000000] 7 base 140000000 mask FF0000000 write-back
[ 0.000000] 8 base 14F600000 mask FFFE00000 uncachable
[ 0.000000] 9 base 14F800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01859000, 0x01859fff] PGTABLE
[ 0.000000] BRK [0x0185a000, 0x0185afff] PGTABLE
[ 0.000000] BRK [0x0185b000, 0x0185bfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[ 0.000000] [mem 0x14f400000-0x14f5fffff] page 2M
[ 0.000000] BRK [0x0185c000, 0x0185cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[ 0.000000] [mem 0x14c000000-0x14f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[ 0.000000] [mem 0x100000000-0x14bffffff] page 2M
[ 0.000000] BRK [0x0185d000, 0x0185dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xa6abefff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xa69fffff] page 2M
[ 0.000000] [mem 0xa6a00000-0xa6abefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xa6fff000-0xa6ffffff]
[ 0.000000] [mem 0xa6fff000-0xa6ffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3691c000-0x37485fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 00000000a6ffe210 00094 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000a6ffb000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 00000000a6fec000 0B903 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 00000000a6fbb000 00040
[ 0.000000] ACPI: UEFI 00000000a6ffd000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 00000000a6ffc000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 00000000a6ffa000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 00000000a6ff9000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 00000000a6ff8000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SLIC 00000000a6feb000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 00000000a6fea000 006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 00000000a6fe8000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 00000000a6fe3000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 00000000a6fe1000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 00000000a6fe0000 008A2 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 00000000a6fdf000 00A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: DMAR 00000000a6fde000 000B8 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
[ 0.000000] NODE_DATA [mem 0x14f5f7000-0x14f5fafff]
[ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014ae00000-ffff88014e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x14f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xa6abefff]
[ 0.000000] node 0: [mem 0xa6fff000-0xa6ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x14f5fffff]
[ 0.000000] On node 0 totalpages: 1007195
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9271 pages used for memmap
[ 0.000000] DMA32 zone: 678079 pages, LIFO batch:31
[ 0.000000] Normal zone: 4445 pages used for memmap
[ 0.000000] Normal zone: 325120 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000a6abf000 - 00000000a6ebf000
[ 0.000000] PM: Registered nosave memory: 00000000a6ebf000 - 00000000a6fbf000
[ 0.000000] PM: Registered nosave memory: 00000000a6fbf000 - 00000000a6fff000
[ 0.000000] PM: Registered nosave memory: 00000000a7000000 - 00000000afa00000
[ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc80000
[ 0.000000] PM: Registered nosave memory: 00000000ffc80000 - 0000000100000000
[ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014f200000 s84800 r8192 d21696 u262144
[ 0.000000] pcpu-alloc: s84800 r8192 d21696 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 993402
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=UUID=5e846022-c899-4548-a402-d0b2f70368ec ro acpi_backlight=vendor quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3883860k/5494784k available (3646k kernel code, 1466004k absent, 144920k reserved, 3108k data, 880k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] NR_IRQS:33024 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1696.223 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.44 BogoMIPS (lpj=6784892)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000046] Security Framework initialized
[ 0.000052] AppArmor: AppArmor disabled by boot time parameter
[ 0.000053] Yama: becoming mindful.
[ 0.000408] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001939] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.002622] Mount-cache hash table entries: 256
[ 0.002853] Initializing cgroup subsys cpuacct
[ 0.002855] Initializing cgroup subsys memory
[ 0.002869] Initializing cgroup subsys devices
[ 0.002871] Initializing cgroup subsys freezer
[ 0.002873] Initializing cgroup subsys net_cls
[ 0.002875] Initializing cgroup subsys blkio
[ 0.002877] Initializing cgroup subsys perf_event
[ 0.002911] CPU: Physical Processor ID: 0
[ 0.002912] CPU: Processor Core ID: 0
[ 0.002918] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002918] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003474] mce: CPU supports 7 MCE banks
[ 0.003489] CPU0: Thermal monitoring enabled (TM1)
[ 0.003524] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.003524] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.003524] tlb_flushall_shift: 1
[ 0.003670] Freeing SMP alternatives: 12k freed
[ 0.004187] ACPI: Core revision 20130117
[ 0.011772] ACPI: All ACPI Tables successfully acquired
[ 0.031227] dmar: Host address width 36
[ 0.031230] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.031239] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.031241] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.031247] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.031249] dmar: RMRR base: 0x000000a6e8f000 end: 0x000000a6eaefff
[ 0.031251] dmar: RMRR base: 0x000000a7800000 end: 0x000000af9fffff
[ 0.031324] IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.031326] HPET id 0 under DRHD base 0xfed91000
[ 0.031544] Enabled IRQ remapping in x2apic mode
[ 0.031546] Enabling x2apic
[ 0.031547] Enabled x2apic
[ 0.031566] Switched APIC routing to cluster x2apic.
[ 0.032048] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071754] smpboot: CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz (fam: 06, model: 3a, stepping: 09)
[ 0.071764] TSC deadline timer enabled
[ 0.071777] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[ 0.071785] ... version: 3
[ 0.071787] ... bit width: 48
[ 0.071788] ... generic registers: 4
[ 0.071790] ... value mask: 0000ffffffffffff
[ 0.071791] ... max period: 000000007fffffff
[ 0.071793] ... fixed-purpose events: 3
[ 0.071794] ... event mask: 000000070000000f
[ 0.085982] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072162] smpboot: Booting Node 0, Processors #1 #2 #3
[ 0.113578] Brought up 4 CPUs
[ 0.113583] smpboot: Total of 4 processors activated (13569.78 BogoMIPS)
[ 0.118109] devtmpfs: initialized
[ 0.122129] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
[ 0.122301] regulator-dummy: no parameters
[ 0.122386] NET: Registered protocol family 16
[ 0.122547] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.122549] ACPI: bus type PCI registered
[ 0.122634] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.122638] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.142678] PCI: Using configuration type 1 for base access
[ 0.143566] bio: create slab <bio-0> at 0
[ 0.143670] ACPI: Added _OSI(Module Device)
[ 0.143673] ACPI: Added _OSI(Processor Device)
[ 0.143675] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.143677] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.145540] ACPI: EC: Look up EC in DSDT
[ 0.147462] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.151897] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.152435] ACPI: SSDT 00000000a6e18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.152928] ACPI: Dynamic OEM Table Load:
[ 0.152931] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.153303] ACPI: SSDT 00000000a6e19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.153853] ACPI: Dynamic OEM Table Load:
[ 0.153856] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.153995] ACPI: SSDT 00000000a6e17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.154473] ACPI: Dynamic OEM Table Load:
[ 0.154475] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.155473] ACPI: Interpreter enabled
[ 0.155483] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.155489] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.155508] ACPI: (supports S0 S3 S4 S5)
[ 0.155510] ACPI: Using IOAPIC for interrupt routing
[ 0.155550] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.375450] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.375642] \_SB_.PCI0:_OSC invalid UUID
[ 0.375645] _OSC request data:1 8 0
[ 0.376473] PCI host bridge to bus 0000:00
[ 0.376478] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.376482] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.376485] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.376488] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.376491] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[ 0.376502] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.376630] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.376645] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[ 0.376654] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.376660] pci 0000:00:02.0: reg 20: [io 0x2000-0x203f]
[ 0.376817] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.376848] pci 0000:00:14.0: reg 10: [mem 0xc0600000-0xc060ffff 64bit]
[ 0.376942] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.376978] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.377032] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.377065] pci 0000:00:16.0: reg 10: [mem 0xc0614000-0xc061400f 64bit]
[ 0.377159] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.377283] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.377600] pci 0000:00:1a.0: reg 10: [mem 0xc0619000-0xc06193ff]
[ 0.379402] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.379459] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.379515] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.379536] pci 0000:00:1b.0: reg 10: [mem 0xc0610000-0xc0613fff 64bit]
[ 0.379623] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.379666] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.379713] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.379819] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.379863] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.379910] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.380010] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.380055] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.380105] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.380210] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.380256] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.380318] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.380626] pci 0000:00:1d.0: reg 10: [mem 0xc0618000-0xc06183ff]
[ 0.382429] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.382482] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.382534] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[ 0.382722] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.382749] pci 0000:00:1f.2: reg 10: [io 0x2088-0x208f]
[ 0.382760] pci 0000:00:1f.2: reg 14: [io 0x2094-0x2097]
[ 0.382771] pci 0000:00:1f.2: reg 18: [io 0x2080-0x2087]
[ 0.382782] pci 0000:00:1f.2: reg 1c: [io 0x2090-0x2093]
[ 0.382793] pci 0000:00:1f.2: reg 20: [io 0x2060-0x207f]
[ 0.382804] pci 0000:00:1f.2: reg 24: [mem 0xc0617000-0xc06177ff]
[ 0.382869] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.382960] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.382984] pci 0000:00:1f.3: reg 10: [mem 0xc0615000-0xc06150ff 64bit]
[ 0.383016] pci 0000:00:1f.3: reg 20: [io 0x2040-0x205f]
[ 0.383200] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.383313] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.383345] pci 0000:03:00.0: reg 10: [mem 0xc0500000-0xc050ffff 64bit]
[ 0.383492] pci 0000:03:00.0: supports D1
[ 0.383494] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.383536] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.390276] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.390285] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.390445] pci 0000:04:00.0: [14e4:16b5] type 00 class 0x020000
[ 0.390483] pci 0000:04:00.0: reg 10: [mem 0xc0410000-0xc041ffff 64bit pref]
[ 0.390516] pci 0000:04:00.0: reg 18: [mem 0xc0420000-0xc042ffff 64bit pref]
[ 0.390572] pci 0000:04:00.0: reg 30: [mem 0xfffff800-0xffffffff pref]
[ 0.390685] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.390741] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.390848] pci 0000:04:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.390886] pci 0000:04:00.1: reg 10: [mem 0xc0400000-0xc040ffff 64bit pref]
[ 0.391079] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold
[ 0.398373] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.398386] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.398499] \_SB_.PCI0:_OSC invalid UUID
[ 0.398500] _OSC request data:1 1f 0
[ 0.398506] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.398508] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.458777] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.458857] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.458933] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.459008] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.459083] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.459159] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.459233] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.459308] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.459608] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.459617] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.459689] Found 1 acpi root devices
[ 0.459730] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.459915] ACPI: No dock devices found.
[ 0.459999] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.460003] vgaarb: loaded
[ 0.460004] vgaarb: bridge control possible 0000:00:02.0
[ 0.460054] PCI: Using ACPI for IRQ routing
[ 0.467707] PCI: pci_cache_line_size set to 64 bytes
[ 0.467854] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.467857] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.467859] e820: reserve RAM buffer [mem 0xa6abf000-0xa7ffffff]
[ 0.467862] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[ 0.467864] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[ 0.468016] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.468024] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.470037] Switching to clocksource hpet
[ 0.472278] pnp: PnP ACPI init
[ 0.472294] ACPI: bus type PNP registered
[ 0.472372] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.472485] pnp 00:01: Plug and Play ACPI device, IDs ETD0502 PNP0f13 (active)
[ 0.472559] pnp 00:02: [dma 4]
[ 0.472582] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.472612] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.472731] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.472769] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.472828] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.472831] system 00:06: [io 0xfd60-0xfd63] has been reserved
[ 0.472834] system 00:06: [io 0x1000-0x100f] has been reserved
[ 0.472837] system 00:06: [io 0xffff] has been reserved
[ 0.472841] system 00:06: [io 0xffff] has been reserved
[ 0.472844] system 00:06: [io 0x0400-0x0453] has been reserved
[ 0.472847] system 00:06: [io 0x0458-0x047f] has been reserved
[ 0.472850] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.472853] system 00:06: [io 0x164e-0x164f] has been reserved
[ 0.472857] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.472893] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.472959] system 00:08: [io 0x0454-0x0457] has been reserved
[ 0.472963] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.530306] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.530310] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.530313] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.530316] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.530320] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.530323] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.530326] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.530329] system 00:09: [mem 0xff000000-0xff000fff] has been reserved
[ 0.530332] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.530336] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.530339] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
[ 0.530342] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.530699] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[ 0.530703] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[ 0.530706] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.530729] pnp: PnP ACPI: found 11 devices
[ 0.530730] ACPI: bus type PNP unregistered
[ 0.537725] pci 0000:04:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
[ 0.537749] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.537754] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.537758] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.537784] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.537787] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.537790] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.537796] pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafcfffff]
[ 0.537800] pci 0000:00:1c.0: BAR 15: assigned [mem 0xafd00000-0xafefffff 64bit pref]
[ 0.537804] pci 0000:00:1c.2: BAR 14: assigned [mem 0xaff00000-0xafffffff]
[ 0.537808] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.537812] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.537817] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.537824] pci 0000:00:1c.0: bridge window [mem 0xafb00000-0xafcfffff]
[ 0.537831] pci 0000:00:1c.0: bridge window [mem 0xafd00000-0xafefffff 64bit pref]
[ 0.537839] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.537845] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff]
[ 0.537858] pci 0000:04:00.0: BAR 6: assigned [mem 0xc0430000-0xc04307ff pref]
[ 0.537861] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.537868] pci 0000:00:1c.2: bridge window [mem 0xaff00000-0xafffffff]
[ 0.537873] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.538118] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.538121] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.538124] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.538127] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[ 0.538130] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.538133] pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafcfffff]
[ 0.538135] pci_bus 0000:02: resource 2 [mem 0xafd00000-0xafefffff 64bit pref]
[ 0.538138] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
[ 0.538141] pci_bus 0000:04: resource 1 [mem 0xaff00000-0xafffffff]
[ 0.538144] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[ 0.538224] NET: Registered protocol family 2
[ 0.538503] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.538639] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.538724] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.538747] TCP: reno registered
[ 0.538758] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.538780] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.538885] NET: Registered protocol family 1
[ 0.538901] pci 0000:00:02.0: Boot video device
[ 0.570259] PCI: CLS 64 bytes, default 64
[ 0.570310] Unpacking initramfs...
[ 0.892554] Freeing initrd memory: 11688k freed
[ 0.894483] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.894490] software IO TLB [mem 0xa2abf000-0xa6abf000] (64MB) mapped at [ffff8800a2abf000-ffff8800a6abefff]
[ 0.894541] Simple Boot Flag at 0x44 set to 0x1
[ 0.895013] audit: initializing netlink socket (disabled)
[ 0.895028] type=2000 audit(1373176644.880:1): initialized
[ 0.917489] bounce pool size: 64 pages
[ 0.917495] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.918005] VFS: Disk quotas dquot_6.5.2
[ 0.918036] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.918142] msgmni has been set to 7608
[ 0.918422] alg: No test for stdrng (krng)
[ 0.918456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.918501] io scheduler noop registered
[ 0.918504] io scheduler deadline registered
[ 0.918524] io scheduler cfq registered (default)
[ 0.918766] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.918784] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.918786] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.919041] intel_idle: MWAIT substates: 0x21120
[ 0.919043] intel_idle: v0.4 model 0x3A
[ 0.919045] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.919095] GHES: HEST is not enabled!
[ 0.919158] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.919817] Linux agpgart interface v0.103
[ 0.919957] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.937005] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.937014] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.937138] mousedev: PS/2 mouse device common for all mice
[ 0.937349] rtc_cmos 00:07: RTC can wake from S4
[ 0.937491] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.937525] rtc_cmos 00:07: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.937658] cpuidle: using governor ladder
[ 0.937819] cpuidle: using governor menu
[ 0.937849] drop_monitor: Initializing network drop monitor service
[ 0.937948] TCP: cubic registered
[ 0.938029] NET: Registered protocol family 10
[ 0.938290] mip6: Mobile IPv6
[ 0.938295] NET: Registered protocol family 17
[ 0.938640] PM: Hibernation image not present or could not be loaded.
[ 0.938650] registered taskstats version 1
[ 0.939438] rtc_cmos 00:07: setting system clock to 2013-07-07 05:57:25 UTC (1373176645)
[ 0.940937] Freeing unused kernel memory: 880k freed
[ 0.941075] Write protecting the kernel read-only data: 6144k
[ 0.942867] Freeing unused kernel memory: 440k freed
[ 0.944790] Freeing unused kernel memory: 520k freed
[ 0.951022] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.959221] udevd[67]: starting version 175
[ 0.977816] ACPI: bus type USB registered
[ 0.977866] usbcore: registered new interface driver usbfs
[ 0.977886] usbcore: registered new interface driver hub
[ 0.986784] pps_core: LinuxPPS API ver. 1 registered
[ 0.986790] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.987087] PTP clock support registered
[ 0.990453] usbcore: registered new device driver usb
[ 0.991038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.991338] ehci-pci: EHCI PCI platform driver
[ 0.991518] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.991526] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.991538] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.991561] ehci-pci 0000:00:1a.0: debug port 2
[ 0.995493] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.000104] sdhci: Secure Digital Host Controller Interface driver
[ 1.000109] sdhci: Copyright(c) Pierre Ossman
[ 1.000489] sdhci-pci 0000:04:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[ 1.000712] mmc0: no vqmmc regulator found
[ 1.000716] mmc0: no vmmc regulator found
[ 1.007837] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0619000
[ 1.008623] SCSI subsystem initialized
[ 1.013102] ACPI: bus type ATA registered
[ 1.014931] libata version 3.00 loaded.
[ 1.018374] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.018430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.018436] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.018440] usb usb1: Product: EHCI Host Controller
[ 1.018444] usb usb1: Manufacturer: Linux 3.9-1-amd64 ehci_hcd
[ 1.018447] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.018666] hub 1-0:1.0: USB hub found
[ 1.018676] hub 1-0:1.0: 2 ports detected
[ 1.018998] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 1.019006] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.019016] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.019040] ehci-pci 0000:00:1d.0: debug port 2
[ 1.022972] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.023241] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0618000
[ 1.034341] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.034393] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.034398] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.034403] usb usb2: Product: EHCI Host Controller
[ 1.034407] usb usb2: Manufacturer: Linux 3.9-1-amd64 ehci_hcd
[ 1.034410] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.034621] hub 2-0:1.0: USB hub found
[ 1.034633] hub 2-0:1.0: 2 ports detected
[ 1.034972] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.034981] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.034992] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.035116] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.035203] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 1.035291] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.035297] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.035301] usb usb3: Product: xHCI Host Controller
[ 1.035305] usb usb3: Manufacturer: Linux 3.9-1-amd64 xhci_hcd
[ 1.035309] usb usb3: SerialNumber: 0000:00:14.0
[ 1.035602] xHCI xhci_add_endpoint called for root hub
[ 1.035605] xHCI xhci_check_bandwidth called for root hub
[ 1.035640] hub 3-0:1.0: USB hub found
[ 1.035651] hub 3-0:1.0: 4 ports detected
[ 1.036164] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.036173] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.036211] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.036216] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.036220] usb usb4: Product: xHCI Host Controller
[ 1.036224] usb usb4: Manufacturer: Linux 3.9-1-amd64 xhci_hcd
[ 1.036227] usb usb4: SerialNumber: 0000:00:14.0
[ 1.036548] xHCI xhci_add_endpoint called for root hub
[ 1.036551] xHCI xhci_check_bandwidth called for root hub
[ 1.036585] hub 4-0:1.0: USB hub found
[ 1.036595] hub 4-0:1.0: 4 ports detected
[ 1.042342] mmc0: SDHCI controller on PCI [0000:04:00.1] using ADMA
[ 1.042411] tg3.c:v3.130 (February 14, 2013)
[ 1.048798] ahci 0000:00:1f.2: version 3.0
[ 1.048991] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.049036] ahci: SSS flag set, parallel bus scan disabled
[ 1.049063] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 1.049068] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 1.049075] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.051632] scsi0 : ahci
[ 1.051934] scsi1 : ahci
[ 1.052052] scsi2 : ahci
[ 1.052164] scsi3 : ahci
[ 1.052289] scsi4 : ahci
[ 1.052397] scsi5 : ahci
[ 1.052477] ata1: SATA max UDMA/133 abar m2048@0xc0617000 port 0xc0617100 irq 43
[ 1.052480] ata2: DUMMY
[ 1.052483] ata3: DUMMY
[ 1.052485] ata4: DUMMY
[ 1.052487] ata5: DUMMY
[ 1.052489] ata6: DUMMY
[ 1.071630] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:0e:1b:12
[ 1.071635] tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 1.071639] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.071642] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 1.330553] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.374575] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.380055] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133
[ 1.380060] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.381468] ata1.00: configured for UDMA/133
[ 1.381766] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5
[ 1.387034] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.387041] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.387180] sd 0:0:0:0: [sda] Write Protect is off
[ 1.387186] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.387241] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.456506] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.457765] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.459964] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.462874] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.462879] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.463199] hub 1-1:1.0: USB hub found
[ 1.463352] hub 1-1:1.0: 6 ports detected
[ 1.574667] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.707253] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.707259] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.707509] hub 2-1:1.0: USB hub found
[ 1.707592] hub 2-1:1.0: 8 ports detected
[ 1.874816] usb 3-4: new full-speed USB device number 2 using xhci_hcd
[ 1.893521] usb 3-4: New USB device found, idVendor=24ae, idProduct=2000
[ 1.893526] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.893530] usb 3-4: Product: RAPOO 2.4G Wireless Device
[ 1.893532] usb 3-4: Manufacturer: RAPOO
[ 1.893686] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.893698] usb 3-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.894763] tsc: Refined TSC clocksource calibration: 1696.146 MHz
[ 1.894770] Switching to clocksource tsc
[ 1.896746] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.900563] usbcore: registered new interface driver usbhid
[ 1.900567] usbhid: USB HID core driver
[ 1.902812] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input1
[ 1.902899] hid-generic 0003:24AE:2000.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:14.0-4/input0
[ 1.903366] input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/input/input2
[ 1.904108] hid-generic 0003:24AE:2000.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:14.0-4/input1
[ 1.963041] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.099955] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b336
[ 2.099961] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.099964] usb 1-1.3: Product: HD WebCam
[ 2.099967] usb 1-1.3: Manufacturer: HD WebCam
[ 2.305234] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.150639] udevd[400]: starting version 175
[ 5.599979] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 5.603516] ACPI: AC Adapter [ACAD] (off-line)
[ 5.615461] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
[ 5.615520] ACPI: Power Button [PWRB]
[ 5.615590] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input4
[ 5.615668] ACPI: Lid Switch [LID0]
[ 5.615726] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input5
[ 5.615776] ACPI: Sleep Button [SLPB]
[ 5.615841] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.615887] ACPI: Power Button [PWRF]
[ 5.741589] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 5.741748] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 5.744195] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 5.744313] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 5.747163] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 5.747293] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 5.750478] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 5.750652] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.932894] wmi: Mapper loaded
[ 6.016105] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.044747] ACPI Warning: 0x0000000000002040-0x000000000000205f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130117/utaddress-251)
[ 6.044756] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.097088] ACPI: Requesting acpi_cpufreq
[ 6.193793] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 6.193815] acer_wmi: Function bitmap for Communication Button: 0x1
[ 6.193943] acer_wmi: Disabling ACPI video driver
[ 6.197911] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130117/utaddress-251)
[ 6.197919] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.197924] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 6.197929] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.197930] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130117/utaddress-251)
[ 6.197935] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.197937] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.203800] ACPI: Battery Slot [BAT1] (battery present)
[ 6.203841] input: Acer WMI hotkeys as /devices/virtual/input/input8
[ 6.204025] media: Linux media interface: v0.10
[ 6.204612] input: Acer BMA150 accelerometer as /devices/virtual/input/input9
[ 6.225580] iTCO_vendor_support: vendor-support=0
[ 6.226038] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 6.226074] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.226224] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.250514] [drm] Initialized drm 1.1.0 20060810
[ 6.309108] mei 0000:00:16.0: setting latency timer to 64
[ 6.309207] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 6.350444] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 6.465457] Linux video capture interface: v2.00
[ 6.521009] cfg80211: Calling CRDA to update world regulatory domain
[ 6.599843] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 6.640734] EXT4-fs (sda5): re-mounted. Opts: data=ordered,commit=600
[ 6.867897] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f01)
[ 6.891076] psmouse serio1: elantech: Synaptics capabilities query result 0x01, 0x16, 0x0c.
[ 6.925868] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 7.005384] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
[ 7.090435] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 7.103759] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 7.103851] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 7.104678] [drm] Memory usable by graphics device = 2048M
[ 7.104686] i915 0000:00:02.0: setting latency timer to 64
[ 7.120457] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 7.120466] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.120468] [drm] Driver supports precise vblank timestamp query.
[ 7.120527] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.142994] [drm] Wrong MCH_SSKPD value: 0x20100406
[ 7.142997] [drm] This can cause pipe underruns and display issues.
[ 7.142999] [drm] Please upgrade your BIOS to fix this.
[ 7.161160] fbcon: inteldrmfb (fb0) is primary device
[ 7.390422] ath: phy0: ASPM enabled: 0x42
[ 7.390423] ath: EEPROM regdomain: 0x6a
[ 7.390423] ath: EEPROM indicates we should expect a direct regpair map
[ 7.390425] ath: Country alpha2 being used: 00
[ 7.390425] ath: Regpair used: 0x6a
[ 7.409987] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
[ 7.414845] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input14
[ 7.414924] usbcore: registered new interface driver uvcvideo
[ 7.414925] USB Video Class driver (1.1.1)
[ 7.550606] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 7.550798] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90010800000, irq=17
[ 7.720651] cfg80211: World regulatory domain updated:
[ 7.720652] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.720654] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.720655] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.720656] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 7.720657] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.720658] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 7.937997] Console: switching to colour frame buffer device 170x48
[ 7.947823] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.947829] i915 0000:00:02.0: registered panic notifier
[ 7.948783] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.948836] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input15
[ 7.948914] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.838306] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 9.120653] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 9.435236] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 9.660624] fuse init (API version 7.21)
[ 9.740253] loop: module loaded
[ 10.801486] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 10.901299] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 12.006436] RPC: Registered named UNIX socket transport module.
[ 12.006440] RPC: Registered udp transport module.
[ 12.006442] RPC: Registered tcp transport module.
[ 12.006443] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.045764] FS-Cache: Loaded
[ 12.058350] Key type dns_resolver registered
[ 12.090167] FS-Cache: Netfs 'nfs' registered for caching
[ 12.152936] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.302765] Bluetooth: Core ver 2.16
[ 15.302782] NET: Registered protocol family 31
[ 15.302784] Bluetooth: HCI device and connection manager initialized
[ 15.302791] Bluetooth: HCI socket layer initialized
[ 15.302793] Bluetooth: L2CAP socket layer initialized
[ 15.302797] Bluetooth: SCO socket layer initialized
[ 15.362030] Bluetooth: RFCOMM TTY layer initialized
[ 15.362044] Bluetooth: RFCOMM socket layer initialized
[ 15.362045] Bluetooth: RFCOMM ver 1.11
[ 15.433714] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.433718] Bluetooth: BNEP filters: protocol multicast
[ 15.433728] Bluetooth: BNEP socket layer initialized
[ 16.532035] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 16.551657] tg3 0000:04:00.0: irq 47 for MSI/MSI-X
[ 16.551665] tg3 0000:04:00.0: irq 48 for MSI/MSI-X
[ 16.551674] tg3 0000:04:00.0: irq 49 for MSI/MSI-X
[ 16.551679] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 16.551684] tg3 0000:04:00.0: irq 51 for MSI/MSI-X
[ 17.117216] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.807335] wlan1: authenticate with 1c:7e:e5:38:42:86
[ 18.829206] wlan1: send auth to 1c:7e:e5:38:42:86 (try 1/3)
[ 18.831068] wlan1: authenticated
[ 18.834637] wlan1: associate with 1c:7e:e5:38:42:86 (try 1/3)
[ 18.838875] wlan1: RX AssocResp from 1c:7e:e5:38:42:86 (capab=0x431 status=0 aid=1)
[ 18.838993] wlan1: associated
[ 18.839013] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 1724.072490] mmc0: Timeout waiting for hardware interrupt.
[ 1734.093156] mmc0: Timeout waiting for hardware interrupt.
[ 1744.113746] mmc0: Timeout waiting for hardware interrupt.
[ 1754.134390] mmc0: Timeout waiting for hardware interrupt.
[ 1764.154969] mmc0: Timeout waiting for hardware interrupt.
[ 1774.175578] mmc0: Timeout waiting for hardware interrupt.
[ 1784.196204] mmc0: Timeout waiting for hardware interrupt.
[ 1792.925391] mmc0: Card removed during transfer!
[ 1792.925405] mmc0: Resetting controller.
[ 1804.077411] mmc0: Timeout waiting for hardware interrupt.
[ 1814.098004] mmc0: Timeout waiting for hardware interrupt.
[ 1824.118643] mmc0: Timeout waiting for hardware interrupt.
[ 1834.139240] mmc0: Timeout waiting for hardware interrupt.
[ 1844.159887] mmc0: Timeout waiting for hardware interrupt.
[ 1854.180486] mmc0: Timeout waiting for hardware interrupt.
[ 1864.201082] mmc0: Timeout waiting for hardware interrupt.
[ 1874.221729] mmc0: Timeout waiting for hardware interrupt.
[ 1879.272546] mmc0: Card removed during transfer!
[ 1879.272559] mmc0: Resetting controller.
[ 1890.197086] mmc0: Timeout waiting for hardware interrupt.
[ 1900.217662] mmc0: Timeout waiting for hardware interrupt.
[ 1910.238282] mmc0: Timeout waiting for hardware interrupt.
[ 1920.258924] mmc0: Timeout waiting for hardware interrupt.
[ 1930.279528] mmc0: Timeout waiting for hardware interrupt.
[ 1940.300186] mmc0: Timeout waiting for hardware interrupt.
[ 1948.123074] mmc0: new SDHC card at address e624
[ 1948.572553] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 1948.580857] mmcblk0: p1
[ 2183.112969] mmc0: card e624 removed
[ 2194.433323] mmc0: Timeout waiting for hardware interrupt.
[ 2204.453945] mmc0: Timeout waiting for hardware interrupt.
[ 2214.474518] mmc0: Timeout waiting for hardware interrupt.
[ 2224.495124] mmc0: Timeout waiting for hardware interrupt.
[ 2234.515757] mmc0: Timeout waiting for hardware interrupt.
[ 2244.536377] mmc0: Timeout waiting for hardware interrupt.
[ 2254.557035] mmc0: Timeout waiting for hardware interrupt.
[ 2264.577612] mmc0: Timeout waiting for hardware interrupt.
[ 2274.598253] mmc0: Timeout waiting for hardware interrupt.
[ 2284.618887] mmc0: Timeout waiting for hardware interrupt.
[ 2294.639509] mmc0: Timeout waiting for hardware interrupt.
[ 2304.692121] mmc0: Timeout waiting for hardware interrupt.
[ 2309.986077] mmc0: Card removed during transfer!
[ 2309.986090] mmc0: Resetting controller.
[ 2323.260656] mmc0: Timeout waiting for hardware interrupt.
[ 2333.281292] mmc0: Timeout waiting for hardware interrupt.
[ 2343.301901] mmc0: Timeout waiting for hardware interrupt.
[ 2353.322555] mmc0: Timeout waiting for hardware interrupt.
[ 2363.343174] mmc0: Timeout waiting for hardware interrupt.
[ 2373.363791] mmc0: Timeout waiting for hardware interrupt.
[ 2383.384383] mmc0: Timeout waiting for hardware interrupt.
[ 2393.405031] mmc0: Timeout waiting for hardware interrupt.
[ 2403.425642] mmc0: Timeout waiting for hardware interrupt.
[ 2413.446235] mmc0: Timeout waiting for hardware interrupt.
[ 2423.466835] mmc0: Timeout waiting for hardware interrupt.
[ 2433.519505] mmc0: Timeout waiting for hardware interrupt.
[ 2443.540135] mmc0: Timeout waiting for hardware interrupt.
[ 2453.560750] mmc0: Timeout waiting for hardware interrupt.
[ 2460.289869] mmc0: Card removed during transfer!
[ 2460.289881] mmc0: Resetting controller.
[ 2475.490863] mmc0: Timeout waiting for hardware interrupt.
[ 2485.511456] mmc0: Timeout waiting for hardware interrupt.
[ 2495.532068] mmc0: Timeout waiting for hardware interrupt.
[ 2505.552716] mmc0: Timeout waiting for hardware interrupt.
[ 2515.573284] mmc0: Timeout waiting for hardware interrupt.
[ 2525.593899] mmc0: Timeout waiting for hardware interrupt.
[ 2535.614568] mmc0: Timeout waiting for hardware interrupt.
[ 2545.635136] mmc0: Timeout waiting for hardware interrupt.
[ 2555.655809] mmc0: Timeout waiting for hardware interrupt.
[ 2565.676426] mmc0: Timeout waiting for hardware interrupt.
[ 2575.761067] mmc0: Timeout waiting for hardware interrupt.
[ 2585.781698] mmc0: Timeout waiting for hardware interrupt.
[ 2595.802284] mmc0: Timeout waiting for hardware interrupt.
[ 2605.822916] mmc0: Timeout waiting for hardware interrupt.
[ 2615.843535] mmc0: Timeout waiting for hardware interrupt.
[ 2625.864117] mmc0: Timeout waiting for hardware interrupt.
[ 2635.884787] mmc0: Timeout waiting for hardware interrupt.
[ 2636.578052] tg3.c:v3.130 (February 14, 2013)
[ 2636.614310] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address b8:88:e3:0e:1b:12
[ 2636.614328] tg3 0000:04:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 2636.614339] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2636.614348] tg3 0000:04:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 2636.631253] tg3 0000:04:00.0: irq 47 for MSI/MSI-X
[ 2636.631266] tg3 0000:04:00.0: irq 48 for MSI/MSI-X
[ 2636.631275] tg3 0000:04:00.0: irq 49 for MSI/MSI-X
[ 2636.631283] tg3 0000:04:00.0: irq 50 for MSI/MSI-X
[ 2636.631292] tg3 0000:04:00.0: irq 51 for MSI/MSI-X
[ 2636.710379] mmc0: new SDHC card at address e624
[ 2636.710764] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 2636.719029] mmcblk0: p1
[ 2637.199288] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Reply to: