Your message dated Sun, 23 Jun 2013 17:40:50 +0100 with message-id <1372005650.8771.96.camel@deadeye.wl.decadent.org.uk> and subject line Re: please close the bug has caused the Debian Bug report #712860, regarding aptitude upgrade probleme with package linux-image-3.2.0-4-amd64 version 3.2.46-1 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 712860: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=712860 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: aptitude upgrade probleme with package linux-image-3.2.0-4-amd64 version 3.2.46-1
- From: "esobian@googlemail.com" <esobian@googlemail.com>
- Date: Thu, 20 Jun 2013 11:11:34 +0200
- Message-id: <[🔎] 51C2C746.70909@googlemail.com>
- In-reply-to: <51C2C513.3060101@googlemail.com>
- References: <51C2C513.3060101@googlemail.com>
Package: linux-image-3.2.0-4-amd64 Version: 3.2.46-1 When i make a upgrade procedure on my debian wheezy it stops by saying there is a problem in linux-image-3.2.0-4-amd64 root@neuromancer:/home/eric# aptitude update Treffer http://ftp.de.debian.org wheezy Release.gpg Treffer http://security.debian.org wheezy/updates Release.gpg Treffer http://ftp.de.debian.org wheezy-updates Release.gpg Treffer http://security.debian.org wheezy/updates Release Treffer http://ftp.de.debian.org wheezy Release Treffer http://security.debian.org wheezy/updates/main Sources Treffer http://ftp.de.debian.org wheezy-updates Release Treffer http://security.debian.org wheezy/updates/non-free Sources Treffer http://ftp.de.debian.org wheezy/main Sources Treffer http://security.debian.org wheezy/updates/contrib Sources Treffer http://ftp.de.debian.org wheezy/non-free Sources Treffer http://ftp.de.debian.org wheezy/contrib Sources Treffer http://security.debian.org wheezy/updates/main amd64 Packages Treffer http://ftp.de.debian.org wheezy/main amd64 Packages Treffer http://security.debian.org wheezy/updates/non-free amd64 Packages Treffer http://ftp.de.debian.org wheezy/non-free amd64 Packages Treffer http://security.debian.org wheezy/updates/contrib amd64 Packages Treffer http://ftp.de.debian.org wheezy/contrib amd64 Packages Treffer http://security.debian.org wheezy/updates/main i386 Packages Treffer http://ftp.de.debian.org wheezy/main i386 Packages Treffer http://security.debian.org wheezy/updates/non-free i386 Packages Treffer http://ftp.de.debian.org wheezy/non-free i386 Packages Treffer http://security.debian.org wheezy/updates/contrib i386 Packages Treffer http://ftp.de.debian.org wheezy/contrib i386 Packages Treffer http://security.debian.org wheezy/updates/contrib Translation-en Treffer http://ftp.de.debian.org wheezy/contrib Translation-en Treffer http://security.debian.org wheezy/updates/main Translation-en Treffer http://ftp.de.debian.org wheezy/main Translation-de_DE Treffer http://security.debian.org wheezy/updates/non-free Translation-en Treffer http://ftp.de.debian.org wheezy/main Translation-de Treffer http://ftp.de.debian.org wheezy/main Translation-en Treffer http://ftp.de.debian.org wheezy/non-free Translation-en Treffer http://ftp.de.debian.org wheezy-updates/main Sources Treffer http://ftp.de.debian.org wheezy-updates/non-free Sources Treffer http://ftp.de.debian.org wheezy-updates/contrib Sources Treffer http://ftp.de.debian.org wheezy-updates/main amd64 Packages Treffer http://ftp.de.debian.org wheezy-updates/non-free amd64 Packages Treffer http://ftp.de.debian.org wheezy-updates/contrib amd64 Packages Treffer http://ftp.de.debian.org wheezy-updates/main i386 Packages Treffer http://ftp.de.debian.org wheezy-updates/non-free i386 Packages Treffer http://ftp.de.debian.org wheezy-updates/contrib i386 Packages Treffer http://ftp.de.debian.org wheezy-updates/contrib Translation-en Treffer http://ftp.de.debian.org wheezy-updates/main Translation-en Treffer http://ftp.de.debian.org wheezy-updates/non-free Translation-en root@neuromancer:/home/eric# aptitude upgrade Die folgenden teilweise installierten Pakete werden konfiguriert: linux-image-3.2.0-4-amd64 Es werden keine Pakete installiert, aktualisiert oder entfernt. 0 Pakete aktualisiert, 0 zusätzlich installiert, 0 werden entfernt und 0 nicht aktualisiert. 0 B an Archiven müssen heruntergeladen werden. Nach dem Entpacken werden 0 B zusätzlich belegt sein. linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ... Running depmod. Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img. dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 17 zurück Fehler traten auf beim Bearbeiten von: linux-image-3.2.0-4-amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) Ein Paket konnte nicht installiert werden. Versuch, dies zu lösen: linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ... Running depmod. Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img. dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 17 zurück Fehler traten auf beim Bearbeiten von: linux-image-3.2.0-4-amd64 root@neuromancer:/home/eric# sudo dpkg --list linux-image-3.2.0-4-amd64 Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten | Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig |/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) ||/ Name Version Architektur Beschreibung +++-=====================================-=======================-=======================-================================================================================ iF linux-image-3.2.0-4-amd64 3.2.46-1 amd64 Linux 3.2 for 64-bit PCs root@neuromancer:/home/eric# dpkg --list linux-image-3.2.0-4-amd64 Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten | Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/ Halb installiert/Trigger erWartet/Trigger anhängig |/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler: GROSS=schlecht) ||/ Name Version Architektur Beschreibung +++-=====================================-=======================-=======================-================================================================================ iF linux-image-3.2.0-4-amd64 3.2.46-1 amd64 Linux 3.2 for 64-bit PCs root@neuromancer:/home/eric# dpkg --status linux-image-3.2.0-4-amd64 Package: linux-image-3.2.0-4-amd64 Status: install ok half-configured Priority: optional Section: kernel Installed-Size: 105529 Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org> Architecture: amd64 Source: linux Version: 3.2.46-1 Config-Version: 3.2.41-2+deb7u2 Provides: linux-image, linux-modules-3.2.0-4-amd64 Depends: kmod | module-init-tools, linux-base (>= 3~), initramfs-tools (>= 0.99~) | linux-initramfs-tool Pre-Depends: debconf | debconf-2.0 Recommends: firmware-linux-free (>= 3~) Suggests: linux-doc-3.2, debian-kernel-handbook, grub-pc | extlinux | lilo Breaks: at (<< 3.1.12-1+squeeze1), initramfs-tools (<< 0.99~) Description: Linux 3.2 for 64-bit PCs The Linux kernel 3.2 and modules for use on PCs with AMD64, Intel 64 or VIA Nano processors. . This kernel also runs on a Xen hypervisor. It supports both privileged (dom0) and unprivileged (domU) operation. root@neuromancer:/home/eric# root@neuromancer:/home/eric# aptitude install reportbug Die folgenden teilweise installierten Pakete werden konfiguriert: linux-image-3.2.0-4-amd64 Es werden keine Pakete installiert, aktualisiert oder entfernt. 0 Pakete aktualisiert, 0 zusätzlich installiert, 0 werden entfernt und 0 nicht aktualisiert. 0 B an Archiven müssen heruntergeladen werden. Nach dem Entpacken werden 0 B zusätzlich belegt sein. linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ... Running depmod. Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img. dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 17 zurück Fehler traten auf beim Bearbeiten von: linux-image-3.2.0-4-amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) Ein Paket konnte nicht installiert werden. Versuch, dies zu lösen: linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ... Running depmod. Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img. dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure): Unterprozess installiertes post-installation-Skript gab den Fehlerwert 17 zurück Fehler traten auf beim Bearbeiten von: linux-image-3.2.0-4-amd64 eric@neuromancer:~$ reportbug -q --template -T none -s none -S normal -b --list-cc none -q linux-image-3.2.0-4-amd64 Include network configuration and status from this computer? Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit From: eric <eric@neuromancer.fritz.box> To: Debian Bug Tracking System <submit@bugs.debian.org> Subject: linux-image-3.2.0-4-amd64: none X-Debbugs-Cc: none Package: src:linux Version: 3.2.46-1 Severity: normal Dear Maintainer, *** Please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these lines *** -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=38042732-8fb2-42a7-94cd-679c7ca79519 ro quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 3.798902] usb 4-1.3: New USB device found, idVendor=046d, idProduct=c050 [ 3.798907] usb 4-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.798911] usb 4-1.3: Product: USB-PS/2 Optical Mouse [ 3.798913] usb 4-1.3: Manufacturer: Logitech [ 3.815030] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.3/4-1.3:1.0/input/input2 [ 3.815136] generic-usb 0003:046D:C050.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-1.3/input0 [ 3.897765] usb 4-1.4: new full-speed USB device number 5 using uhci_hcd [ 4.030588] usb 4-1.4: New USB device found, idVendor=046d, idProduct=c227 [ 4.030593] usb 4-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.030596] usb 4-1.4: Product: G15 GamePanel LCD [ 4.053654] input: G15 GamePanel LCD as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.4/4-1.4:1.0/input/input3 [ 4.053765] generic-usb 0003:046D:C227.0004: input,hiddev0,hidraw3: USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1a.1-1.4/input0 [ 5.911178] udevd[506]: starting version 175 [ 7.061620] EDAC MC: Ver: 2.1.0 [ 7.112626] wmi: Mapper loaded [ 7.208119] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4 [ 7.208124] ACPI: Power Button [PWRB] [ 7.208165] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 7.208168] ACPI: Power Button [PWRF] [ 7.211529] ACPI: Requesting acpi_cpufreq [ 7.213666] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0': DEV 0000:ff:03.0 [ 7.213682] EDAC PCI0: Giving out device to module 'i7core_edac' controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED) [ 7.213689] EDAC i7core: Driver loaded, 1 memory controller(s) found. [ 7.226874] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f] [ 7.226877] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.432909] iTCO_vendor_support: vendor-support=0 [ 7.466635] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 7.567447] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 7.567550] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860) [ 7.567715] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 7.689384] psmouse: Unknown symbol input_mt_assign_slots (err 0) [ 7.689410] psmouse: Unknown symbol input_mt_sync_frame (err 0) [ 7.689485] psmouse: Unknown symbol input_mt_init_slots_flags (err 0) [ 7.745097] snd_pcm: Unknown symbol vm_iomap_memory (err 0) [ 7.745555] snd_pcm: Unknown symbol vm_iomap_memory (err 0) [ 7.964679] nvidia: module license 'NVIDIA' taints kernel. [ 7.964683] Disabling lock debugging due to kernel taint [ 8.110320] nvidia 0000:02:00.0: setting latency timer to 64 [ 8.110325] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 8.110416] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013 [ 9.162495] snd_pcm: Unknown symbol vm_iomap_memory (err 0) [ 9.181146] Linux media interface: v0.10 [ 9.196006] Linux video capture interface: v2.00 [ 9.210210] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0808) [ 9.225217] input: UVC Camera (046d:0808) as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input7 [ 9.225320] usbcore: registered new interface driver uvcvideo [ 9.225326] USB Video Class driver (1.1.1) [ 12.791763] usb 1-4: reset high-speed USB device number 3 using ehci_hcd [ 13.892283] input: G15 Extra Keys as /devices/virtual/input/input8 [ 14.953193] Adding 23436284k swap on /dev/sdb6. Priority:-1 extents:1 across:23436284k [ 14.970642] EXT4-fs (sdb5): re-mounted. Opts: (null) [ 15.425129] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro [ 15.539408] loop: Unknown symbol bdgrab (err 0) [ 16.456035] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null) [ 16.524773] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended [ 16.528493] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 17.775049] RPC: Registered named UNIX socket transport module. [ 17.775052] RPC: Registered udp transport module. [ 17.775054] RPC: Registered tcp transport module. [ 17.775056] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 17.810174] FS-Cache: Loaded [ 17.850085] FS-Cache: Netfs 'nfs' registered for caching [ 17.861996] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 18.215195] r8169 0000:06:00.0: eth0: link down [ 18.215203] r8169 0000:06:00.0: eth0: link down [ 18.216968] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.347434] vboxdrv: Found 8 processor cores. [ 19.349324] vboxdrv: fAsync=0 offMin=0x2de offMax=0x31694 [ 19.349400] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 19.349403] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000). [ 19.721942] vboxpci: IOMMU not found (not registered) [ 20.564545] r8169 0000:06:00.0: eth0: link up [ 20.566185] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.526240] Bluetooth: Core ver 2.16 [ 23.526257] NET: Registered protocol family 31 [ 23.526259] Bluetooth: HCI device and connection manager initialized [ 23.526262] Bluetooth: HCI socket layer initialized [ 23.526264] Bluetooth: L2CAP socket layer initialized [ 23.526269] Bluetooth: SCO socket layer initialized [ 23.774848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 23.774858] Bluetooth: BNEP filters: protocol multicast [ 23.775640] Bluetooth: RFCOMM TTY layer initialized [ 23.775646] Bluetooth: RFCOMM socket layer initialized [ 23.775649] Bluetooth: RFCOMM ver 1.11 [ 23.865049] lp: driver loaded but no devices found [ 23.932243] ppdev: user-space parallel port driver [ 28.518296] usb 1-4: reset high-speed USB device number 3 using ehci_hcd [ 174.918656] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [ 209.015876] EXT4-fs (sda1): Unaligned AIO/DIO on inode 30 by VirtualBox; performance will be poor. [ 1585.598175] snd_pcm: Unknown symbol vm_iomap_memory (err 0) [ 2128.983147] device-mapper: uevent: version 1.0.3 [ 2128.983233] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2131.074315] efivars: Unknown symbol efi_query_variable_store (err 0) [ 2131.237484] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 2131.237847] SGI XFS Quota Management subsystem [ 2131.240687] JFS: nTxBlock = 8192, nTxLock = 65536 [ 2131.251911] NTFS driver 2.1.30 [Flags: R/W MODULE]. [ 2131.261056] QNX4 filesystem 0.2.3 registered. [ 2131.279272] btrfs: Unknown symbol account_page_redirty (err 0) [ 2131.282595] fuse init (API version 7.17) ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1701 board_vendor: ASUSTeK Computer INC. board_name: Rampage II GENE board_version: Rev 2.xx ** Loaded modules: fuse libcrc32c zlib_deflate ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs reiserfs ext3 jbd ext2 dm_mod snd_seq snd_seq_device snd_timer snd soundcore snd_page_alloc parport_pc ppdev rfcomm bnep lp parport bluetooth rfkill pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) binfmt_misc vboxdrv(O) nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc uvcvideo videodev v4l2_compat_ioctl32 media uinput nvidia(P) iTCO_wdt serio_raw pcspkr evdev iTCO_vendor_support asus_atk0110 coretemp mxm_wmi acpi_cpufreq mperf i2c_i801 i7core_edac processor button thermal_sys wmi i2c_core edac_core crc32c_intel ext4 crc16 jbd2 mbcache usbhid hid usb_storage sg sr_mod sd_mod cdrom crc_t10dif ata_generic ata_piix pata_jmicron uhci_hcd ahci libahci firewire_ohci libata scsi_mod firewire_core ehci_hcd r8169 crc_itu_t mii usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port [8086:3405] (rev 13) Subsystem: ASUSTeK Computer Inc. Device [1043:836b] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: f8000000-fbbfffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: i7core_edac 00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Throttle Registers [8086:3438] (rev 13) (prog-if 00 [8259]) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at a800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at a880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at ac00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7fff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e] Subsystem: ASUSTeK Computer Inc. Device [1043:82ea] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 7 Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: c0400000-c07fffff Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 [8086:3a44] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbe00000-fbefffff Prefetchable memory behind bridge: 00000000f6e00000-00000000f6efffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 [8086:3a46] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fbd00000-fbdfffff Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fbc00000-fbcfffff Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at a080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at a400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at a480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at 9000 [size=8] Region 1: I/O ports at 8c00 [size=4] Region 2: I/O ports at 8880 [size=8] Region 3: I/O ports at 8800 [size=4] Region 4: I/O ports at 8480 [size=16] Region 5: I/O ports at 8400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30] Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7ffd000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:82d4] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 20 Region 0: I/O ports at a000 [size=8] Region 1: I/O ports at 9c00 [size=4] Region 2: I/O ports at 9880 [size=8] Region 3: I/O ports at 9800 [size=4] Region 4: I/O ports at 9480 [size=16] Region 5: I/O ports at 9400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT200b [GeForce GTX 275] [10de:05e6] (rev a1) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Device [3842:1175] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 24 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at bc00 [size=128] [virtual] Expansion ROM at fbb80000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia 04:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:824f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 16 Region 5: Memory at fbcfe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 04:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:824f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at cc00 [size=8] Region 1: I/O ports at c880 [size=4] Region 2: I/O ports at c800 [size=8] Region 3: I/O ports at c480 [size=4] Region 4: I/O ports at c400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 05:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8384] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fbdff000 (64-bit, non-prefetchable) [size=2K] Region 2: I/O ports at d800 [size=256] Capabilities: <access denied> Kernel driver in use: firewire_ohci 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02) Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82c6] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 256 bytes Interrupt: pin A routed to IRQ 68 Region 0: I/O ports at e800 [size=256] Region 2: Memory at fbeff000 (64-bit, non-prefetchable) [size=4K] Region 4: Memory at f6ef0000 (64-bit, prefetchable) [size=64K] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ff:00.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture Generic Non-Core Registers [8086:2c41] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QuickPath Architecture System Address Decoder [8086:2c01] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link 0 [8086:2c10] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Physical 0 [8086:2c11] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller [8086:2c18] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Target Address Decoder [8086:2c19] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:03.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Test Registers [8086:2c1c] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Control Registers [8086:2c20] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Address Registers [8086:2c21] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Rank Registers [8086:2c22] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:04.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2c23] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Control Registers [8086:2c28] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Address Registers [8086:2c29] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Rank Registers [8086:2c2a] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:05.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2c2b] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Control Registers [8086:2c30] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Address Registers [8086:2c31] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Rank Registers [8086:2c32] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:06.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 Integrated Memory Controller Channel 2 Thermal Control Registers [8086:2c33] (rev 05) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 046d:0808 Logitech, Inc. Webcam C600 Bus 001 Device 004: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer Bus 004 Device 002: ID 046d:c223 Logitech, Inc. G11/G15 Keyboard / USB Hub Bus 004 Device 003: ID 046d:c226 Logitech, Inc. G15 Refresh Keyboard Bus 004 Device 004: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse Bus 004 Device 005: ID 046d:c227 Logitech, Inc. G15 Refresh Keyboard -- System Information: Debian Release: 7.1 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores) Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
--- End Message ---
--- Begin Message ---
- To: 712860-done@bugs.debian.org
- Subject: Re: please close the bug
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Sun, 23 Jun 2013 17:40:50 +0100
- Message-id: <1372005650.8771.96.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] 51C702A5.9020908@googlemail.com>
- References: <[🔎] 51C702A5.9020908@googlemail.com>
On Sun, 2013-06-23 at 16:13 +0200, esobian@googlemail.com wrote: > Hi all, > > thank you Ben for the hint with the blocking on setting a symbolic link > to /boot. That pushed my to check my fstab and there I found a missing > "e" at the filesystem ext4. Now I edit my fstab and every thing works > well again!!! [...] OK, closing. Ben. -- Ben Hutchings DNRC Motto: I can please only one person per day. Today is not your day. Tomorrow isn't looking good either.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---