Bug#712860: aptitude upgrade probleme with package linux-image-3.2.0-4-amd64 version 3.2.46-1
Package: linux-image-3.2.0-4-amd64
Version: 3.2.46-1
When i make a upgrade procedure on my debian wheezy it stops by saying
there is a problem in linux-image-3.2.0-4-amd64
root@neuromancer:/home/eric# aptitude update
Treffer http://ftp.de.debian.org wheezy Release.gpg
Treffer http://security.debian.org wheezy/updates Release.gpg
Treffer http://ftp.de.debian.org wheezy-updates Release.gpg
Treffer http://security.debian.org wheezy/updates Release
Treffer http://ftp.de.debian.org wheezy Release
Treffer http://security.debian.org wheezy/updates/main Sources
Treffer http://ftp.de.debian.org wheezy-updates Release
Treffer http://security.debian.org wheezy/updates/non-free Sources
Treffer http://ftp.de.debian.org wheezy/main Sources
Treffer http://security.debian.org wheezy/updates/contrib Sources
Treffer http://ftp.de.debian.org wheezy/non-free Sources
Treffer http://ftp.de.debian.org wheezy/contrib Sources
Treffer http://security.debian.org wheezy/updates/main amd64 Packages
Treffer http://ftp.de.debian.org wheezy/main amd64 Packages
Treffer http://security.debian.org wheezy/updates/non-free amd64 Packages
Treffer http://ftp.de.debian.org wheezy/non-free amd64 Packages
Treffer http://security.debian.org wheezy/updates/contrib amd64 Packages
Treffer http://ftp.de.debian.org wheezy/contrib amd64 Packages
Treffer http://security.debian.org wheezy/updates/main i386 Packages
Treffer http://ftp.de.debian.org wheezy/main i386 Packages
Treffer http://security.debian.org wheezy/updates/non-free i386 Packages
Treffer http://ftp.de.debian.org wheezy/non-free i386 Packages
Treffer http://security.debian.org wheezy/updates/contrib i386 Packages
Treffer http://ftp.de.debian.org wheezy/contrib i386 Packages
Treffer http://security.debian.org wheezy/updates/contrib Translation-en
Treffer http://ftp.de.debian.org wheezy/contrib Translation-en
Treffer http://security.debian.org wheezy/updates/main Translation-en
Treffer http://ftp.de.debian.org wheezy/main Translation-de_DE
Treffer http://security.debian.org wheezy/updates/non-free Translation-en
Treffer http://ftp.de.debian.org wheezy/main Translation-de
Treffer http://ftp.de.debian.org wheezy/main Translation-en
Treffer http://ftp.de.debian.org wheezy/non-free Translation-en
Treffer http://ftp.de.debian.org wheezy-updates/main Sources
Treffer http://ftp.de.debian.org wheezy-updates/non-free Sources
Treffer http://ftp.de.debian.org wheezy-updates/contrib Sources
Treffer http://ftp.de.debian.org wheezy-updates/main amd64 Packages
Treffer http://ftp.de.debian.org wheezy-updates/non-free amd64 Packages
Treffer http://ftp.de.debian.org wheezy-updates/contrib amd64 Packages
Treffer http://ftp.de.debian.org wheezy-updates/main i386 Packages
Treffer http://ftp.de.debian.org wheezy-updates/non-free i386 Packages
Treffer http://ftp.de.debian.org wheezy-updates/contrib i386 Packages
Treffer http://ftp.de.debian.org wheezy-updates/contrib Translation-en
Treffer http://ftp.de.debian.org wheezy-updates/main Translation-en
Treffer http://ftp.de.debian.org wheezy-updates/non-free Translation-en
root@neuromancer:/home/eric# aptitude upgrade
Die folgenden teilweise installierten Pakete werden konfiguriert:
linux-image-3.2.0-4-amd64
Es werden keine Pakete installiert, aktualisiert oder entfernt.
0 Pakete aktualisiert, 0 zusätzlich installiert, 0 werden entfernt und 0
nicht aktualisiert.
0 B an Archiven müssen heruntergeladen werden. Nach dem Entpacken werden
0 B zusätzlich belegt sein.
linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ...
Running depmod.
Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img.
dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert
17 zurück
Fehler traten auf beim Bearbeiten von:
linux-image-3.2.0-4-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
Ein Paket konnte nicht installiert werden. Versuch, dies zu lösen:
linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ...
Running depmod.
Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img.
dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert
17 zurück
Fehler traten auf beim Bearbeiten von:
linux-image-3.2.0-4-amd64
root@neuromancer:/home/eric# sudo dpkg --list linux-image-3.2.0-4-amd64
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler:
GROSS=schlecht)
||/ Name Version
Architektur Beschreibung
+++-=====================================-=======================-=======================-================================================================================
iF linux-image-3.2.0-4-amd64 3.2.46-1 amd64
Linux 3.2 for 64-bit PCs
root@neuromancer:/home/eric# dpkg --list linux-image-3.2.0-4-amd64
Gewünscht=Unbekannt/Installieren/R=Entfernen/P=Vollständig Löschen/Halten
| Status=Nicht/Installiert/Config/U=Entpackt/halb konFiguriert/
Halb installiert/Trigger erWartet/Trigger anhängig
|/ Fehler?=(kein)/R=Neuinstallation notwendig (Status, Fehler:
GROSS=schlecht)
||/ Name Version
Architektur Beschreibung
+++-=====================================-=======================-=======================-================================================================================
iF linux-image-3.2.0-4-amd64 3.2.46-1 amd64
Linux 3.2 for 64-bit PCs
root@neuromancer:/home/eric# dpkg --status linux-image-3.2.0-4-amd64
Package: linux-image-3.2.0-4-amd64
Status: install ok half-configured
Priority: optional
Section: kernel
Installed-Size: 105529
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Architecture: amd64
Source: linux
Version: 3.2.46-1
Config-Version: 3.2.41-2+deb7u2
Provides: linux-image, linux-modules-3.2.0-4-amd64
Depends: kmod | module-init-tools, linux-base (>= 3~), initramfs-tools
(>= 0.99~) | linux-initramfs-tool
Pre-Depends: debconf | debconf-2.0
Recommends: firmware-linux-free (>= 3~)
Suggests: linux-doc-3.2, debian-kernel-handbook, grub-pc | extlinux | lilo
Breaks: at (<< 3.1.12-1+squeeze1), initramfs-tools (<< 0.99~)
Description: Linux 3.2 for 64-bit PCs
The Linux kernel 3.2 and modules for use on PCs with AMD64, Intel 64 or
VIA Nano processors.
.
This kernel also runs on a Xen hypervisor. It supports both privileged
(dom0) and unprivileged (domU) operation.
root@neuromancer:/home/eric#
root@neuromancer:/home/eric# aptitude install reportbug
Die folgenden teilweise installierten Pakete werden konfiguriert:
linux-image-3.2.0-4-amd64
Es werden keine Pakete installiert, aktualisiert oder entfernt.
0 Pakete aktualisiert, 0 zusätzlich installiert, 0 werden entfernt und 0
nicht aktualisiert.
0 B an Archiven müssen heruntergeladen werden. Nach dem Entpacken werden
0 B zusätzlich belegt sein.
linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ...
Running depmod.
Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img.
dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert
17 zurück
Fehler traten auf beim Bearbeiten von:
linux-image-3.2.0-4-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
Ein Paket konnte nicht installiert werden. Versuch, dies zu lösen:
linux-image-3.2.0-4-amd64 (3.2.46-1) wird eingerichtet ...
Running depmod.
Failed to symbolic-link /boot/initrd.img-3.2.0-4-amd64 to initrd.img.
dpkg: Fehler beim Bearbeiten von linux-image-3.2.0-4-amd64 (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert
17 zurück
Fehler traten auf beim Bearbeiten von:
linux-image-3.2.0-4-amd64
eric@neuromancer:~$ reportbug -q --template -T none -s none -S normal -b
--list-cc none -q linux-image-3.2.0-4-amd64
Include network configuration and status from this computer?
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
From: eric <eric@neuromancer.fritz.box>
To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: linux-image-3.2.0-4-amd64: none
X-Debbugs-Cc: none
Package: src:linux
Version: 3.2.46-1
Severity: normal
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc
version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.41-2+deb7u2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64
root=UUID=38042732-8fb2-42a7-94cd-679c7ca79519 ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 3.798902] usb 4-1.3: New USB device found, idVendor=046d,
idProduct=c050
[ 3.798907] usb 4-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3.798911] usb 4-1.3: Product: USB-PS/2 Optical Mouse
[ 3.798913] usb 4-1.3: Manufacturer: Logitech
[ 3.815030] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.3/4-1.3:1.0/input/input2
[ 3.815136] generic-usb 0003:046D:C050.0003: input,hidraw2: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.1-1.3/input0
[ 3.897765] usb 4-1.4: new full-speed USB device number 5 using uhci_hcd
[ 4.030588] usb 4-1.4: New USB device found, idVendor=046d,
idProduct=c227
[ 4.030593] usb 4-1.4: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[ 4.030596] usb 4-1.4: Product: G15 GamePanel LCD
[ 4.053654] input: G15 GamePanel LCD as
/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1.4/4-1.4:1.0/input/input3
[ 4.053765] generic-usb 0003:046D:C227.0004: input,hiddev0,hidraw3:
USB HID v1.11 Keypad [G15 GamePanel LCD] on usb-0000:00:1a.1-1.4/input0
[ 5.911178] udevd[506]: starting version 175
[ 7.061620] EDAC MC: Ver: 2.1.0
[ 7.112626] wmi: Mapper loaded
[ 7.208119] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 7.208124] ACPI: Power Button [PWRB]
[ 7.208165] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.208168] ACPI: Power Button [PWRF]
[ 7.211529] ACPI: Requesting acpi_cpufreq
[ 7.213666] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core
#0': DEV 0000:ff:03.0
[ 7.213682] EDAC PCI0: Giving out device to module 'i7core_edac'
controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
[ 7.213689] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 7.226874] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts
with ACPI region SMRG [io 0x400-0x40f]
[ 7.226877] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 7.432909] iTCO_vendor_support: vendor-support=0
[ 7.466635] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 7.567447] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 7.567550] iTCO_wdt: Found a ICH10R TCO device (Version=2,
TCOBASE=0x0860)
[ 7.567715] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.689384] psmouse: Unknown symbol input_mt_assign_slots (err 0)
[ 7.689410] psmouse: Unknown symbol input_mt_sync_frame (err 0)
[ 7.689485] psmouse: Unknown symbol input_mt_init_slots_flags (err 0)
[ 7.745097] snd_pcm: Unknown symbol vm_iomap_memory (err 0)
[ 7.745555] snd_pcm: Unknown symbol vm_iomap_memory (err 0)
[ 7.964679] nvidia: module license 'NVIDIA' taints kernel.
[ 7.964683] Disabling lock debugging due to kernel taint
[ 8.110320] nvidia 0000:02:00.0: setting latency timer to 64
[ 8.110325] vgaarb: device changed decodes:
PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.110416] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88
Wed Mar 27 14:26:46 PDT 2013
[ 9.162495] snd_pcm: Unknown symbol vm_iomap_memory (err 0)
[ 9.181146] Linux media interface: v0.10
[ 9.196006] Linux video capture interface: v2.00
[ 9.210210] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0808)
[ 9.225217] input: UVC Camera (046d:0808) as
/devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4:1.0/input/input7
[ 9.225320] usbcore: registered new interface driver uvcvideo
[ 9.225326] USB Video Class driver (1.1.1)
[ 12.791763] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 13.892283] input: G15 Extra Keys as /devices/virtual/input/input8
[ 14.953193] Adding 23436284k swap on /dev/sdb6. Priority:-1
extents:1 across:23436284k
[ 14.970642] EXT4-fs (sdb5): re-mounted. Opts: (null)
[ 15.425129] EXT4-fs (sdb5): re-mounted. Opts: errors=remount-ro
[ 15.539408] loop: Unknown symbol bdgrab (err 0)
[ 16.456035] EXT4-fs (sdb7): mounted filesystem with ordered data
mode. Opts: (null)
[ 16.524773] EXT4-fs (sda1): warning: maximal mount count reached,
running e2fsck is recommended
[ 16.528493] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 17.775049] RPC: Registered named UNIX socket transport module.
[ 17.775052] RPC: Registered udp transport module.
[ 17.775054] RPC: Registered tcp transport module.
[ 17.775056] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 17.810174] FS-Cache: Loaded
[ 17.850085] FS-Cache: Netfs 'nfs' registered for caching
[ 17.861996] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 18.215195] r8169 0000:06:00.0: eth0: link down
[ 18.215203] r8169 0000:06:00.0: eth0: link down
[ 18.216968] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.347434] vboxdrv: Found 8 processor cores.
[ 19.349324] vboxdrv: fAsync=0 offMin=0x2de offMax=0x31694
[ 19.349400] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 19.349403] vboxdrv: Successfully loaded version 4.1.18_Debian
(interface 0x00190000).
[ 19.721942] vboxpci: IOMMU not found (not registered)
[ 20.564545] r8169 0000:06:00.0: eth0: link up
[ 20.566185] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.526240] Bluetooth: Core ver 2.16
[ 23.526257] NET: Registered protocol family 31
[ 23.526259] Bluetooth: HCI device and connection manager initialized
[ 23.526262] Bluetooth: HCI socket layer initialized
[ 23.526264] Bluetooth: L2CAP socket layer initialized
[ 23.526269] Bluetooth: SCO socket layer initialized
[ 23.774848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.774858] Bluetooth: BNEP filters: protocol multicast
[ 23.775640] Bluetooth: RFCOMM TTY layer initialized
[ 23.775646] Bluetooth: RFCOMM socket layer initialized
[ 23.775649] Bluetooth: RFCOMM ver 1.11
[ 23.865049] lp: driver loaded but no devices found
[ 23.932243] ppdev: user-space parallel port driver
[ 28.518296] usb 1-4: reset high-speed USB device number 3 using ehci_hcd
[ 174.918656] warning: `VirtualBox' uses 32-bit capabilities (legacy
support in use)
[ 209.015876] EXT4-fs (sda1): Unaligned AIO/DIO on inode 30 by
VirtualBox; performance will be poor.
[ 1585.598175] snd_pcm: Unknown symbol vm_iomap_memory (err 0)
[ 2128.983147] device-mapper: uevent: version 1.0.3
[ 2128.983233] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel@redhat.com
[ 2131.074315] efivars: Unknown symbol efi_query_variable_store (err 0)
[ 2131.237484] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 2131.237847] SGI XFS Quota Management subsystem
[ 2131.240687] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2131.251911] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 2131.261056] QNX4 filesystem 0.2.3 registered.
[ 2131.279272] btrfs: Unknown symbol account_page_redirty (err 0)
[ 2131.282595] fuse init (API version 7.17)
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1701
board_vendor: ASUSTeK Computer INC.
board_name: Rampage II GENE
board_version: Rev 2.xx
** Loaded modules:
fuse
libcrc32c
zlib_deflate
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext3
jbd
ext2
dm_mod
snd_seq
snd_seq_device
snd_timer
snd
soundcore
snd_page_alloc
parport_pc
ppdev
rfcomm
bnep
lp
parport
bluetooth
rfkill
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
binfmt_misc
vboxdrv(O)
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
uvcvideo
videodev
v4l2_compat_ioctl32
media
uinput
nvidia(P)
iTCO_wdt
serio_raw
pcspkr
evdev
iTCO_vendor_support
asus_atk0110
coretemp
mxm_wmi
acpi_cpufreq
mperf
i2c_i801
i7core_edac
processor
button
thermal_sys
wmi
i2c_core
edac_core
crc32c_intel
ext4
crc16
jbd2
mbcache
usbhid
hid
usb_storage
sg
sr_mod
sd_mod
cdrom
crc_t10dif
ata_generic
ata_piix
pata_jmicron
uhci_hcd
ahci
libahci
firewire_ohci
libata
scsi_mod
firewire_core
ehci_hcd
r8169
crc_itu_t
mii
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5520/5500/X58 I/O Hub to
ESI Port [8086:3405] (rev 13)
Subsystem: ASUSTeK Computer Inc. Device [1043:836b]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f8000000-fbbfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub System
Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: i7core_edac
00:14.1 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub GPIO
and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub Control
Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.3 PIC [0800]: Intel Corporation 7500/5520/5500/X58 I/O Hub
Throttle Registers [8086:3438] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1a.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at a800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at a880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at ac00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7fff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD
Audio Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:82ea]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 7
Region 0: Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI
Express Root Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0400000-c07fffff
Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI
Express Root Port 3 [8086:3a44] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000f6e00000-00000000f6efffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI
Express Root Port 4 [8086:3a46] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI
Express Root Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbc00000-fbcfffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at a080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at a480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC
Interface Controller [8086:3a16]
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4
port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 8c00 [size=4]
Region 2: I/O ports at 8880 [size=8]
Region 3: I/O ports at 8800 [size=4]
Region 4: I/O ports at 8480 [size=16]
Region 5: I/O ports at 8400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus
Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. P5Q Deluxe Motherboard [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7ffd000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2
port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT200b
[GeForce GTX 275] [10de:05e6] (rev a1) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Device [3842:1175]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at bc00 [size=128]
[virtual] Expansion ROM at fbb80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
04:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fbcfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
04:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE
Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at cc00 [size=8]
Region 1: I/O ports at c880 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at c480 [size=4]
Region 4: I/O ports at c400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
05:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315
Series Firewire Controller [1106:3403] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. P8P67 Deluxe Motherboard [1043:8384]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbdff000 (64-bit, non-prefetchable) [size=2K]
Region 2: I/O ports at d800 [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82c6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 68
Region 0: I/O ports at e800 [size=256]
Region 2: Memory at fbeff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f6ef0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
ff:00.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
QuickPath Architecture Generic Non-Core Registers [8086:2c41] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
QuickPath Architecture System Address Decoder [8086:2c01] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI Link
0 [8086:2c10] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7 QPI
Physical 0 [8086:2c11] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller [8086:2c18] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Target Address Decoder [8086:2c19] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.4 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Test Registers [8086:2c1c] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 0 Control Registers [8086:2c20]
(rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 0 Address Registers [8086:2c21]
(rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 0 Rank Registers [8086:2c22] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 0 Thermal Control Registers
[8086:2c23] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 1 Control Registers [8086:2c28]
(rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 1 Address Registers [8086:2c29]
(rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 1 Rank Registers [8086:2c2a] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 1 Thermal Control Registers
[8086:2c2b] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.0 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 2 Control Registers [8086:2c30]
(rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.1 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 2 Address Registers [8086:2c31]
(rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.2 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 2 Rank Registers [8086:2c32] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:06.3 Host bridge [0600]: Intel Corporation Xeon 5500/Core i7
Integrated Memory Controller Channel 2 Thermal Control Registers
[8086:2c33] (rev 05)
Subsystem: Intel Corporation Device [8086:8086]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 046d:0808 Logitech, Inc. Webcam C600
Bus 001 Device 004: ID 1307:0330 Transcend Information, Inc. 63-in-1
Multi-Card Reader/Writer
Bus 004 Device 002: ID 046d:c223 Logitech, Inc. G11/G15 Keyboard / USB Hub
Bus 004 Device 003: ID 046d:c226 Logitech, Inc. G15 Refresh Keyboard
Bus 004 Device 004: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse
Bus 004 Device 005: ID 046d:c227 Logitech, Inc. G15 Refresh Keyboard
-- System Information:
Debian Release: 7.1
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64:
false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64:
true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: