Your message dated Tue, 11 Jun 2013 02:07:35 +0100 with message-id <1370912855.15470.3.camel@deadeye.wl.decadent.org.uk> and subject line Re: Bug#711888: linux-image-3.9-1-amd64: Problem with cooling when running CPU intensive tasks has caused the Debian Bug report #711888, regarding linux-image-3.9-1-amd64: Problem with cooling when running CPU intensive tasks to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 711888: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=711888 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.9-1-amd64: Problem with cooling when running CPU intensive tasks
- From: Adnan Hodzic <adnan@foolcontrol.org>
- Date: Mon, 10 Jun 2013 19:23:04 +0200
- Message-id: <[🔎] 20130610172304.11197.71247.reportbug@havoc>
Package: src:linux Version: 3.9.4-1 Severity: normal When running regular tasks, fans run at regular level and mantain CPU temperature at regular leves, i.e: http://foolcontrol.org/img/temp47.png However, if I do CPU intensive tasks such as if I play Half Life 2 on Steam, or even watch a video on Youtube in HQ. Temperatures get incredibly high with fans working on maximum. i.e: http://foolcontrol.org/img/temp85.png I also had same problem on 3.8, please inform me if you have any other comments or questions. Adnan -- Package-specific info: ** Version: Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 SMP Debian 3.9.4-1 ** Command line: BOOT_IMAGE=/vmlinuz-3.9-1-amd64 root=/dev/mapper/havoc-root ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [17330.355889] ehci-pci 0000:00:1d.0: setting latency timer to 64 [17330.355929] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [17330.390152] tpm_tis 00:09: TPM is disabled/deactivated (0x6) [17330.570235] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [17330.586298] usb 1-4: device firmware changed [17330.658307] usb 3-1.4: reset full-speed USB device number 4 using ehci-pci [17330.674026] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [17330.674650] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [17330.674654] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [17330.676312] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [17330.676315] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [17330.677124] ata1.00: configured for UDMA/133 [17330.690047] sd 0:0:0:0: [sda] Starting disk [17330.752080] btusb 3-1.4:1.0: no reset_resume for driver btusb? [17330.752082] btusb 3-1.4:1.1: no reset_resume for driver btusb? [17330.822205] usb 3-1.6: reset high-speed USB device number 5 using ehci-pci [17331.037704] PM: resume of devices complete after 682.626 msecs [17331.038346] PM: Finishing wakeup. [17331.038348] Restarting tasks ... done. [17331.046500] video LNXVIDEO:00: Restoring backlight state [17331.053752] usb 1-4: USB disconnect, device number 2 [17331.055327] cdc_ncm 1-4:1.6 wwan0: unregister 'cdc_ncm' usb-0000:00:14.0-4, Mobile Broadband Network Device [17331.082211] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021269e340 [17331.082216] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021269e380 [17331.082219] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021269e2c0 [17331.082222] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021269e300 [17331.082225] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021269e1c0 [17331.082227] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021269e200 [17331.082230] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880211d92ac0 [17331.082232] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021269e240 [17331.082235] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021269e280 [17331.082238] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880211d92b40 [17331.082240] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880211d92b00 [17331.082243] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880211d92b80 [17331.082245] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880211d92bc0 [17331.082248] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880211d92c00 [17331.250604] usb 1-4: new high-speed USB device number 3 using xhci_hcd [17331.266278] usb 1-4: New USB device found, idVendor=0bdb, idProduct=1927 [17331.266291] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [17331.266312] usb 1-4: Product: H5321 gw [17331.266320] usb 1-4: Manufacturer: Lenovo [17331.266328] usb 1-4: SerialNumber: 8BD2F4B2E6D85CC0 [17331.267679] usb 1-4: USB disconnect, device number 3 [17331.451488] hidraw: raw HID events driver (C) Jiri Kosina [17331.458646] usbcore: registered new interface driver usbhid [17331.458656] usbhid: USB HID core driver [17331.478274] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S [17331.485579] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0 [17331.696575] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [17332.013615] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [17332.353128] usb 1-4: new high-speed USB device number 4 using xhci_hcd [17332.370661] usb 1-4: New USB device found, idVendor=0bdb, idProduct=1926 [17332.370672] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [17332.370679] usb 1-4: Product: H5321 gw [17332.370684] usb 1-4: Manufacturer: Lenovo [17332.370689] usb 1-4: SerialNumber: 8BD2F4B2E6D85CC0 [17332.401988] cdc_acm 1-4:1.1: ttyACM0: USB ACM device [17332.405856] cdc_acm 1-4:1.3: ttyACM1: USB ACM device [17332.414038] cdc_wdm 1-4:1.5: cdc-wdm0: USB WDM device [17332.429447] usb 1-4: MAC-Address: 02:15:e0:ec:01:00 [17332.430065] cdc_ncm 1-4:1.6 wwan0: register 'cdc_ncm' at usb-0000:00:14.0-4, Mobile Broadband Network Device, 02:15:e0:ec:01:00 [17332.430904] cdc_wdm 1-4:1.8: cdc-wdm1: USB WDM device [17332.431317] cdc_acm 1-4:1.9: ttyACM2: USB ACM device [17338.440644] wlan0: authenticate with 72:b6:86:74:46:e0 [17338.444310] wlan0: send auth to 72:b6:86:74:46:e0 (try 1/3) [17338.446873] wlan0: authenticated [17338.447269] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [17338.449993] wlan0: associate with 72:b6:86:74:46:e0 (try 1/3) [17338.452671] wlan0: RX AssocResp from 72:b6:86:74:46:e0 (capab=0x431 status=0 aid=2) [17338.455134] wlan0: associated [17338.455197] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [17338.455382] cfg80211: Calling CRDA for country: CA [17338.470814] cfg80211: Regulatory domain changed to country: CA [17338.470827] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [17338.470836] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [17338.470843] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [17338.470850] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17338.470856] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [17338.470862] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [17338.896222] IPv6: wlan0: IPv6 duplicate address fe80::8e70:5aff:fe80:f75c detected! [17699.980011] CPU3: Package power limit notification (total events = 46912) [17699.980014] CPU2: Package power limit notification (total events = 46911) [17699.980016] CPU0: Package power limit notification (total events = 46918) [17699.980018] CPU1: Package power limit notification (total events = 46918) [17699.991029] CPU2: Package power limit normal [17699.991031] CPU3: Package power limit normal [17699.991040] CPU0: Package power limit normal [17699.991041] CPU1: Package power limit normal [17999.837191] CPU1: Package power limit normal [17999.837194] CPU0: Package power limit normal [17999.837214] CPU3: Package power limit normal [17999.837216] CPU2: Package power limit normal [18299.682631] CPU2: Package power limit notification (total events = 82160) [18299.682633] CPU3: Package power limit notification (total events = 82159) [18299.682643] CPU0: Package power limit notification (total events = 82174) [18299.682646] CPU1: Package power limit notification (total events = 82172) [18299.688330] CPU2: Package power limit normal [18299.688332] CPU3: Package power limit normal [18299.688354] CPU1: Package power limit normal [18299.688356] CPU0: Package power limit normal ** Model information sys_vendor: LENOVO product_name: 3444CTO product_version: ThinkPad X1 Carbon chassis_vendor: LENOVO chassis_version: Not Available bios_vendor: LENOVO bios_version: G6ET59WW (2.03 ) board_vendor: LENOVO board_name: 3444CTO board_version: Not Defined ** Loaded modules: usbhid hid pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) parport_pc ppdev lp parport vboxdrv(O) bnep rfcomm binfmt_misc uinput nfsd auth_rpcgss nfs_acl nfs lockd dns_resolver fscache sunrpc ext2 loop fuse snd_hda_codec_hdmi snd_hda_codec_realtek joydev cdc_mbim uvcvideo videobuf2_vmalloc videobuf2_memops btusb videobuf2_core videodev bluetooth cdc_ncm media usbnet cdc_acm cdc_wdm mii iTCO_wdt iTCO_vendor_support arc4 snd_hda_intel coretemp kvm_intel snd_hda_codec snd_hwdep iwldvm snd_pcm snd_page_alloc kvm mac80211 snd_seq psmouse snd_seq_device pcspkr snd_timer thinkpad_acpi i915 serio_raw nvram acpi_cpufreq battery mperf evdev ac snd iwlwifi tpm_tis i2c_i801 tpm tpm_bios drm_kms_helper cfg80211 lpc_ich drm mfd_core video wmi rfkill i2c_algo_bit i2c_core soundcore mei button processor ext4 crc16 jbd2 mbcache dm_crypt dm_mod sg sd_mod crc_t10dif crc32c_intel ghash_clmulni_intel ahci libahci aesni_intel libata aes_x86_64 ablk_helper cryptd xts lrw gf128mul ehci_pci ehci_hcd scsi_mod microcode xhci_hcd sdhci_pci sdhci mmc_core thermal thermal_sys usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) Subsystem: Lenovo Device [17aa:21f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device [17aa:21f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 46 Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 4000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Lenovo Device [17aa:21f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at f1500000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) Subsystem: Lenovo Device [17aa:21f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at f1515000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei 00:16.3 Serial controller [0700]: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller [8086:1e3d] (rev 04) (prog-if 02 [16550]) Subsystem: Lenovo Device [17aa:21f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 4090 [size=8] Region 1: Memory at f151b000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:21f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f151a000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: Lenovo Device [17aa:21f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at f1510000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0d00000-f14fffff Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: f0c00000-f0cfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Lenovo Device [17aa:21f9] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f1519000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation QS77 Express Chipset LPC Controller [8086:1e56] (rev 04) Subsystem: Lenovo Device [17aa:21f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device [17aa:21f9] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at 4088 [size=8] Region 1: I/O ports at 409c [size=4] Region 2: I/O ports at 4080 [size=8] Region 3: I/O ports at 4098 [size=4] Region 4: I/O ports at 4060 [size=32] Region 5: Memory at f1518000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) Subsystem: Lenovo Device [17aa:21f9] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f1514000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at efa0 [size=32] Kernel driver in use: i801_smbus 02:00.0 System peripheral [0880]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 07) (prog-if 01) Subsystem: Lenovo Device [17aa:21f3] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0d00000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 03:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] [8086:0085] (rev 96) Subsystem: Intel Corporation Device [8086:c220] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at f0c00000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi ** USB devices: Bus 001 Device 004: ID 0bdb:1926 Ericsson Business Mobile Networks BV Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 003: ID 147e:2020 Upek TouchChip Fingerprint Coprocessor (WBF advanced mode) Bus 003 Device 004: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth 4.0 [ThinkPad] Bus 003 Device 005: ID 04f2:b315 Chicony Electronics Co., Ltd -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (600, 'unstable'), (500, 'stable-updates'), (300, 'testing'), (200, 'stable'), (100, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.9-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.50 ii initramfs-tools [linux-initramfs-tool] 0.112 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.9-1-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.9-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.00-14 pn linux-doc-3.9 <none> Versions of packages linux-image-3.9-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.38 pn firmware-libertas <none> ii firmware-linux 0.38 ii firmware-linux-nonfree 0.38 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.9-1-amd64/postinst/ignoring-ramdisk: * linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64: linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false
--- End Message ---
--- Begin Message ---
- To: 711888-done@bugs.debian.org
- Subject: Re: Bug#711888: linux-image-3.9-1-amd64: Problem with cooling when running CPU intensive tasks
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 11 Jun 2013 02:07:35 +0100
- Message-id: <1370912855.15470.3.camel@deadeye.wl.decadent.org.uk>
- In-reply-to: <[🔎] 20130610172304.11197.71247.reportbug@havoc>
- References: <[🔎] 20130610172304.11197.71247.reportbug@havoc>
On Mon, 2013-06-10 at 19:23 +0200, Adnan Hodzic wrote: > Package: src:linux > Version: 3.9.4-1 > Severity: normal > > When running regular tasks, fans run at regular level and mantain CPU > temperature at regular leves, i.e: http://foolcontrol.org/img/temp47.png > > However, if I do CPU intensive tasks such as if I play Half Life 2 on Steam, or > even watch a video on Youtube in HQ. Temperatures get incredibly high with fans > working on maximum. i.e: http://foolcontrol.org/img/temp85.png > > I also had same problem on 3.8, please inform me if you have any other comments > or questions. This is expected behaviour. Ben. -- Ben Hutchings If God had intended Man to program, we'd have been born with serial I/O ports.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---