Bug#711891: linux-image-3.2.0-4-amd64: parallel printer port not detected (parport_serial, NetMos 9835)
Package: src:linux
Version: 3.2.41-2
Severity: normal
Dear Maintainer,
my system has a PCI multi IO card (2 serial, 1 parallel port) with the NetMos
9835 chipset. The PCI card worked well in squeeze. After upgarde to wheezy the
parallel port is not longer detected. When a print job is queued and the
squeeze kernel get booted the job is printed.
Message from /var/log/message related to the multi io card when running on
wheezy are:
[ 0.756263] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
[ 0.776456] 0000:01:05.0: ttyS1 at I/O 0xdc00 (irq = 16) is a 16550A
[ 0.808213] 0000:01:05.0: ttyS2 at I/O 0xd880 (irq = 16) is a 16550A
Messages from squeeze:
[ 3.454300] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 16
[ 3.454315] parport_serial 0000:01:05.0: PCI INT A -> Link[LNKA] -> GSI 16
(level, low) -> IRQ 16
[ 3.454333] parport0: PC-style at 0xd800 [PCSPP,TRISTATE,EPP]
[ 3.466874] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 3.467040] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:18/LNXVIDEO:00/input/input5
[ 3.467070] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 3.486976] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
[ 3.488397] parport0: Printer, Hewlett-Packard HP LaserJet 1100
[ 3.488539] 0000:01:05.0: ttyS1 at I/O 0xdc00 (irq = 16) is a 16550A
[ 3.488629] 0000:01:05.0: ttyS2 at I/O 0xd880 (irq = 16) is a 16550A
At least one other user has the same problem too:
http://debianforum.de/forum/viewtopic.php?f=13&t=142814&p=936672#p936672
The slightly newer kernel version (3.2.41-2+deb7u2) has the problem too.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=2d5475d5-fb2e-455b-a504-0822abb601b8 ro libata.force=noncq nmi_watchdog=0 nr_uarts=1 quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 3.577908] IR LIRC bridge handler initialized
[ 3.582331] All bytes are equal. It is not a TEA5767
[ 3.582346] tuner 1-0060: Tuner -1 found with type(s) Radio TV.
[ 3.605547] nvidia: module license 'NVIDIA' taints kernel.
[ 3.605555] Disabling lock debugging due to kernel taint
[ 3.707171] tda9887 1-0043: creating new instance
[ 3.707179] tda9887 1-0043: tda988[5/6/7] found
[ 3.708036] scsi 9:0:0:0: Direct-Access Generic USB CF Reader 0.00 PQ: 0 ANSI: 2
[ 3.708107] tuner 1-0043: Tuner 74 found with type(s) Radio TV.
[ 3.708480] scsi 9:0:0:1: Direct-Access Generic USB SD Reader 0.00 PQ: 0 ANSI: 2
[ 3.708845] scsi 9:0:0:2: Direct-Access Generic USB MS Reader 0.00 PQ: 0 ANSI: 2
[ 3.709219] scsi 9:0:0:3: Direct-Access Generic USB SM Reader 0.00 PQ: 0 ANSI: 2
[ 3.709680] sd 9:0:0:0: Attached scsi generic sg9 type 0
[ 3.710054] sd 9:0:0:1: Attached scsi generic sg10 type 0
[ 3.710171] sd 9:0:0:2: Attached scsi generic sg11 type 0
[ 3.710395] sd 9:0:0:3: Attached scsi generic sg12 type 0
[ 3.716092] sd 9:0:0:0: [sdi] Attached SCSI removable disk
[ 3.716713] sd 9:0:0:1: [sdj] Attached SCSI removable disk
[ 3.717338] sd 9:0:0:2: [sdk] Attached SCSI removable disk
[ 3.720338] sd 9:0:0:3: [sdl] Attached SCSI removable disk
[ 3.788200] cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
[ 3.788842] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 21
[ 3.788863] nvidia 0000:02:00.0: setting latency timer to 64
[ 3.788873] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.789194] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
[ 3.791633] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
[ 3.791646] snd_hda_intel 0000:00:07.0: power state changed by ACPI to D0
[ 3.792126] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 3.792135] hda_intel: Disabling MSI
[ 3.792202] snd_hda_intel 0000:00:07.0: setting latency timer to 64
[ 3.815840] tuner-simple 1-0060: creating new instance
[ 3.815845] tuner-simple 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[ 3.860032] Registered IR keymap rc-winfast
[ 3.860126] input: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:08.0/0000:01:07.0/rc/rc0/input5
[ 3.860176] rc0: cx88 IR (Leadtek Winfast 2000XP as /devices/pci0000:00/0000:00:08.0/0000:01:07.0/rc/rc0
[ 3.860182] cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 19, latency: 32, mmio: 0xf9000000
[ 3.860231] cx88[0]/0: set_audio_standard_BTSC (status: known-good)
[ 3.862726] cx88[0]/0: registered device video0 [v4l2]
[ 3.862778] cx88[0]/0: registered device vbi0
[ 3.862817] cx88[0]/0: registered device radio0
[ 3.874396] cx88[0]/0: cx88: tvaudio thread started
[ 3.886550] cx88[0]/0: set_audio_standard_FM (status: unknown)
[ 3.886574] cx88[0]/0: cx88_set_stereo: mask 0x3f, ctl 0x1a [status=0x22,ctl=0x101a,vol=0x40]
[ 4.065529] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 5.980998] Adding 9764860k swap on /dev/sdb1. Priority:-1 extents:1 across:9764860k
[ 6.168915] EXT3-fs (sda1): using internal journal
[ 6.217417] loop: module loaded
[ 9.298714] kjournald starting. Commit interval 5 seconds
[ 9.298971] EXT3-fs (sdb10): using internal journal
[ 9.298981] EXT3-fs (sdb10): mounted filesystem with ordered data mode
[ 9.319564] kjournald starting. Commit interval 5 seconds
[ 9.319937] EXT3-fs (sdb11): using internal journal
[ 9.319946] EXT3-fs (sdb11): mounted filesystem with ordered data mode
[ 9.353305] kjournald starting. Commit interval 5 seconds
[ 9.353561] EXT3-fs (sdb5): using internal journal
[ 9.353570] EXT3-fs (sdb5): mounted filesystem with ordered data mode
[ 9.365949] kjournald starting. Commit interval 5 seconds
[ 9.366922] EXT3-fs (sdc5): using internal journal
[ 9.366933] EXT3-fs (sdc5): mounted filesystem with ordered data mode
[ 9.404639] kjournald starting. Commit interval 5 seconds
[ 9.404898] EXT3-fs (sdb9): using internal journal
[ 9.404907] EXT3-fs (sdb9): mounted filesystem with ordered data mode
[ 9.459880] kjournald starting. Commit interval 5 seconds
[ 9.460691] EXT3-fs (sdb6): using internal journal
[ 9.460702] EXT3-fs (sdb6): mounted filesystem with ordered data mode
[ 9.493077] kjournald starting. Commit interval 5 seconds
[ 9.493345] EXT3-fs (sdb8): using internal journal
[ 9.493354] EXT3-fs (sdb8): mounted filesystem with ordered data mode
[ 10.729963] RPC: Registered named UNIX socket transport module.
[ 10.729971] RPC: Registered udp transport module.
[ 10.729977] RPC: Registered tcp transport module.
[ 10.729982] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.742139] FS-Cache: Loaded
[ 10.761015] FS-Cache: Netfs 'nfs' registered for caching
[ 10.766808] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.984890] fuse init (API version 7.17)
[ 12.053811] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 12.070578] NFSD: starting 90-second grace period
[ 12.549495] Bluetooth: Core ver 2.16
[ 12.549515] NET: Registered protocol family 31
[ 12.549516] Bluetooth: HCI device and connection manager initialized
[ 12.549519] Bluetooth: HCI socket layer initialized
[ 12.549520] Bluetooth: L2CAP socket layer initialized
[ 12.549523] Bluetooth: SCO socket layer initialized
[ 12.552225] Bluetooth: RFCOMM TTY layer initialized
[ 12.552229] Bluetooth: RFCOMM socket layer initialized
[ 12.552231] Bluetooth: RFCOMM ver 1.11
[ 12.571898] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.571900] Bluetooth: BNEP filters: protocol multicast
[ 12.606690] forcedeth 0000:00:0a.0: irq 44 for MSI/MSI-X
[ 12.672480] lp: driver loaded but no devices found
[ 12.686509] ppdev: user-space parallel port driver
[ 23.088018] eth0: no IPv6 routers present
[ 36.235650] cx88[0]/0: set_audio_standard_FM (status: unknown)
[ 36.235677] cx88[0]/0: cx88_set_stereo: mask 0x3f, ctl 0x1a [status=0x22,ctl=0x101a,vol=0x40]
[ 36.249199] cx88[0]/0: set_audio_standard_FM (status: unknown)
[ 36.249222] cx88[0]/0: cx88_set_stereo: mask 0x3f, ctl 0x1a [status=0x22,ctl=0x101a,vol=0x40]
[ 36.252917] cx88[0]/0: set_audio_standard_FM (status: unknown)
[ 36.252942] cx88[0]/0: cx88_set_stereo: mask 0x3f, ctl 0x1a [status=0x22,ctl=0x101a,vol=0x40]
[ 36.280072] cx88[0]/0: set_audio_standard_FM (status: unknown)
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1004
board_vendor: ASUSTeK Computer INC.
board_name: M4N78 PRO
board_version: Rev 1.xx
** Loaded modules:
parport_serial
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
rfkill
crc16
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_hda_codec_hdmi
snd_hda_codec_via
rc_winfast
tuner_simple
tuner_types
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
tda9887
nvidia(P)
snd_seq_midi
snd_seq_midi_event
tda8290
tea5767
ir_lirc_codec
lirc_dev
ir_mce_kbd_decoder
tuner
snd_rawmidi
ir_sony_decoder
ir_jvc_decoder
snd_seq
ir_rc6_decoder
snd_seq_device
snd_timer
snd
cx8800
ir_rc5_decoder
psmouse
shpchp
powernow_k8
edac_mce_amd
mperf
ir_nec_decoder
cx88xx
btcx_risc
tveeprom
videobuf_dma_sg
videobuf_core
v4l2_common
videodev
v4l2_compat_ioctl32
media
rc_core
i2c_algo_bit
edac_core
serio_raw
pcspkr
evdev
k10temp
soundcore
asus_atk0110
video
wmi
i2c_nforce2
i2c_core
button
processor
thermal_sys
ext3
mbcache
jbd
sr_mod
usb_storage
sg
cdrom
sd_mod
crc_t10dif
ata_generic
floppy
xhci_hcd
ohci_hcd
pata_amd
ahci
libahci
ehci_hcd
libata
scsi_mod
forcedeth
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
allow-hotplug usb0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1320 qdisc pfifo_fast state UP qlen 1000
link/ether 00:26:18:ae:09:6e brd ff:ff:ff:ff:ff:ff
inet 192.168.178.3/24 brd 192.168.178.255 scope global eth0
inet6 fe80::226:18ff:feae:96e/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 56550 231 0 0 0 0 0 0 56550 231 0 0 0 0 0 0
eth0: 5926211 5343 0 0 0 0 0 0 490322 4049 0 0 0 0 0 0
*** Protocol statistics:
Ip:
5622 total packets received
0 forwarded
0 incoming packets discarded
5622 incoming packets delivered
4228 requests sent out
144 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
91 active connections openings
11 passive connection openings
4 failed connection attempts
5 connection resets received
1 connections established
5076 segments received
3694 segments send out
3 segments retransmited
0 bad segments received.
26 resets sent
Udp:
584 packets received
0 packets to unknown port received.
0 packet receive errors
528 packets sent
UdpLite:
TcpExt:
24 TCP sockets finished time wait in fast timer
104 delayed acks sent
Quick ack mode was activated 1 times
178 packets directly queued to recvmsg prequeue.
56495 bytes directly received in process context from prequeue
3813 packet headers predicted
47 packets header predicted and directly queued to user
228 acknowledgments not containing data payload received
229 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
Detected reordering 2 times using time stamp
1 congestion windows fully recovered without slow start
2 congestion windows partially recovered using Hoe heuristic
1 fast retransmits
1 forward retransmits
1 other TCP timeouts
1 DSACKs sent for old packets
2 DSACKs received
6 connections reset due to unexpected data
5 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
TCPSackShifted: 4
TCPSackMerged: 1
TCPSackShiftFallback: 2
IpExt:
InMcastPkts: 33
OutMcastPkts: 35
InBcastPkts: 56
OutBcastPkts: 51
InOctets: 5918065
OutOctets: 483092
InMcastOctets: 4318
OutMcastOctets: 4450
InBcastOctets: 8996
OutBcastOctets: 7356
** PCI devices:
00:00.0 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0754] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: NVIDIA Corporation MCP78S [GeForce 8200] LPC Bridge [10de:075c] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 2f00 [size=256]
00:01.1 SMBus [0c05]: NVIDIA Corporation MCP78S [GeForce 8200] SMBus [10de:0752] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 2900 [size=64]
Region 4: I/O ports at 2d00 [size=64]
Region 5: I/O ports at 2e00 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:01.2 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0751] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.3 Co-processor [0b40]: NVIDIA Corporation MCP78S [GeForce 8200] Co-Processor [10de:0753] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f8f80000 (32-bit, non-prefetchable) [size=512K]
00:01.4 RAM memory [0500]: NVIDIA Corporation MCP78S [GeForce 8200] Memory Controller [10de:0568] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f8f7e000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at f8f7fc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f8f7d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at f8f7f800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:06.0 IDE interface [0101]: NVIDIA Corporation MCP78S [GeForce 8200] IDE [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:07.0 Audio device [0403]: NVIDIA Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:836c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f8f78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:08.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f9000000-f9ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:09.0 SATA controller [0106]: NVIDIA Corporation MCP78S [GeForce 8200] AHCI Controller [10de:0ad4] (rev a2) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at c480 [size=8]
Region 1: I/O ports at c400 [size=4]
Region 2: I/O ports at c080 [size=8]
Region 3: I/O ports at c000 [size=4]
Region 4: I/O ports at bc00 [size=16]
Region 5: Memory at f8f76000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:0a.0 Ethernet controller [0200]: NVIDIA Corporation MCP77 Ethernet [10de:0760] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f8f7c000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b880 [size=8]
Region 2: Memory at f8f7f400 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at f8f7f000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:0b.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa000000-fbefffff
Prefetchable memory behind bridge: 00000000d6000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Express Bridge [10de:0778] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:13.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 PCI bridge [0604]: NVIDIA Corporation MCP78S [GeForce 8200] PCI Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 Communication controller [0780]: NetMos Technology PCI 9835 Multi-I/O Controller [9710:9835] (rev 01)
Subsystem: LSI Logic / Symbios Logic 1P2S [1000:0012]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=8]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=8]
Region 4: I/O ports at d400 [size=8]
Region 5: I/O ports at d080 [size=16]
Kernel driver in use: serial
01:07.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: LeadTek Research Inc. Winfast TV 2000XP Expert [107d:6611]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C77 [GeForce 8300] [10de:0848] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:82e2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at d6000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at ec00 [size=128]
[virtual] Expansion ROM at fbee0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
05:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0ea0:2126 Ours Technology, Inc. 7-in-1 Card Reader
Bus 004 Device 002: ID 05e3:0606 Genesys Logic, Inc. USB 2.0 Hub / D-Link DUB-H4 USB 2.0 Hub
Bus 004 Device 003: ID 1307:0330 Transcend Information, Inc. 63-in-1 Multi-Card Reader/Writer
-- System Information:
Debian Release: 7.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii firmware-linux-free 3.2
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u1
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: