[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#598435: marked as done (linux-image-2.6.32-bpo.5-amd64: hangs during awaking from suspend)



Your message dated Sat, 8 Jun 2013 12:17:23 +0200
with message-id <20130608101723.GF4796@pisco.westfalen.local>
and subject line Closing
has caused the Debian Bug report #598435,
regarding linux-image-2.6.32-bpo.5-amd64: hangs during awaking from suspend
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
598435: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=598435
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-23~bpo50+1

-------- Forwarded Message --------
From: Andras Antos <antos@szit.bme.hu>
Reply-to: Andras Antos <antos@szit.bme.hu>, 598147@bugs.debian.org
To: 598147@bugs.debian.org
Cc: debian-backports@lists.debian.org
Subject: Bug#598147: linux-image-2.6.32-bpo.5-amd64: hangs during awaking from suspend
Date: Tue, 28 Sep 2010 22:59:02 +0200 (CEST)

Followup-For: Bug #598147
Package: linux-2.6
Version: 2.6.32-23~bpo50+1

I am not sure if this is related (SD card is not involved here).

My system (HP 6730b (NB027EA) notebook) hangs during awaking from suspend 
using this kernel (and earlier linux-image-2.6.32-bpo.5-amd46 kernels).
It does not hang with linux-image-2.6.32-bpo.3-amd64
Version 2.6.32-9~bpo50+1 kernel.

Let me now what other information can I give.

Andras

-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq 6730b (NB027EA#AKC)
product_version: F.11
chassis_vendor: Hewlett-Packard
chassis_version: 
bios_vendor: Hewlett-Packard
bios_version: 68PDD Ver. F.11
board_vendor: Hewlett-Packard
board_name: 30DD
board_version: KBC Version 96.20

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 	Latency: 0
 	Capabilities: <access denied>
 	Kernel driver in use: agpgart-intel
 	Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin A routed to IRQ 32
 	Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
 	Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
 	Region 4: I/O ports at 60f0 [size=8]
 	Capabilities: <access denied>
 	Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Region 0: Memory at 90400000 (64-bit, non-prefetchable) [size=1M]
 	Capabilities: <access denied>

00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin A routed to IRQ 16
 	Region 4: I/O ports at 60c0 [size=32]
 	Capabilities: <access denied>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin B routed to IRQ 17
 	Region 4: I/O ports at 60a0 [size=32]
 	Capabilities: <access denied>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd

00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin C routed to IRQ 18
 	Region 4: I/O ports at 6080 [size=32]
 	Capabilities: <access denied>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin D routed to IRQ 19
 	Region 0: Memory at 98904c00 (32-bit, non-prefetchable) [size=1K]
 	Capabilities: <access denied>
 	Kernel driver in use: ehci_hcd
 	Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
 	Subsystem: Hewlett-Packard Company Device [103c:30e6]
 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0, Cache Line Size: 64 bytes
 	Interrupt: pin A routed to IRQ 17
 	Region 0: Memory at 98900000 (64-bit, non-prefetchable) [size=16K]
 	Capabilities: <access denied>
 	Kernel driver in use: HDA Intel
 	Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0, Cache Line Size: 64 bytes
 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 	I/O behind bridge: 00007000-00007fff
 	Memory behind bridge: 98800000-988fffff
 	Prefetchable memory behind bridge: 0000000098a00000-0000000098bfffff
 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 	Capabilities: <access denied>
 	Kernel driver in use: pcieport
 	Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0, Cache Line Size: 64 bytes
 	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 	I/O behind bridge: 00008000-00008fff
 	Memory behind bridge: 98700000-987fffff
 	Prefetchable memory behind bridge: 0000000098c00000-0000000098dfffff
 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 	Capabilities: <access denied>
 	Kernel driver in use: pcieport
 	Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0, Cache Line Size: 64 bytes
 	Bus: primary=00, secondary=03, subordinate=43, sec-latency=0
 	I/O behind bridge: 00004000-00005fff
 	Memory behind bridge: 94700000-986fffff
 	Prefetchable memory behind bridge: 0000000098e00000-0000000098ffffff
 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 	Capabilities: <access denied>
 	Kernel driver in use: pcieport
 	Kernel modules: shpchp

00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0, Cache Line Size: 64 bytes
 	Bus: primary=00, secondary=44, subordinate=84, sec-latency=0
 	I/O behind bridge: 00002000-00003fff
 	Memory behind bridge: 90700000-946fffff
 	Prefetchable memory behind bridge: 0000000099000000-00000000991fffff
 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 	Capabilities: <access denied>
 	Kernel driver in use: pcieport
 	Kernel modules: shpchp

00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0, Cache Line Size: 64 bytes
 	Bus: primary=00, secondary=85, subordinate=85, sec-latency=0
 	I/O behind bridge: 00009000-00009fff
 	Memory behind bridge: 90600000-906fffff
 	Prefetchable memory behind bridge: 0000000099200000-00000000993fffff
 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 	Capabilities: <access denied>
 	Kernel driver in use: pcieport
 	Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin A routed to IRQ 20
 	Region 4: I/O ports at 6060 [size=32]
 	Capabilities: <access denied>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin B routed to IRQ 22
 	Region 4: I/O ports at 6040 [size=32]
 	Capabilities: <access denied>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin C routed to IRQ 18
 	Region 4: I/O ports at 6020 [size=32]
 	Capabilities: <access denied>
 	Kernel driver in use: uhci_hcd
 	Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin D routed to IRQ 20
 	Region 0: Memory at 98904800 (32-bit, non-prefetchable) [size=1K]
 	Capabilities: <access denied>
 	Kernel driver in use: ehci_hcd
 	Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Bus: primary=00, secondary=86, subordinate=86, sec-latency=32
 	Memory behind bridge: 90500000-905fffff
 	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Capabilities: <access denied>
 	Kernel modules: iTCO_wdt

00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0
 	Interrupt: pin A routed to IRQ 29
 	Region 0: I/O ports at 60e8 [size=8]
 	Region 1: I/O ports at 60fc [size=4]
 	Region 2: I/O ports at 60e0 [size=8]
 	Region 3: I/O ports at 60f8 [size=4]
 	Region 4: I/O ports at 6000 [size=32]
 	Region 5: Memory at 98904000 (32-bit, non-prefetchable) [size=2K]
 	Capabilities: <access denied>
 	Kernel driver in use: ahci
 	Kernel modules: ahci

02:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237]
 	Subsystem: Intel Corporation Device [8086:1211]
 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0, Cache Line Size: 64 bytes
 	Interrupt: pin A routed to IRQ 30
 	Region 0: Memory at 98700000 (64-bit, non-prefetchable) [size=8K]
 	Capabilities: <access denied>
 	Kernel driver in use: iwlagn
 	Kernel modules: iwlagn

85:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 0, Cache Line Size: 64 bytes
 	Interrupt: pin A routed to IRQ 31
 	Region 0: Memory at 90600000 (64-bit, non-prefetchable) [size=64K]
 	Expansion ROM at <ignored> [disabled]
 	Capabilities: <access denied>
 	Kernel driver in use: tg3
 	Kernel modules: tg3

86:02.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811] (rev 70) (prog-if 10 [OHCI])
 	Subsystem: Hewlett-Packard Company Device [103c:30dd]
 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx-
 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 	Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
 	Interrupt: pin A routed to IRQ 16
 	Region 0: Memory at 90500000 (32-bit, non-prefetchable) [size=4K]
 	Capabilities: <access denied>
 	Kernel driver in use: firewire_ohci
 	Kernel modules: firewire-ohci


** USB devices:
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 002: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical Mouse
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04f2:b059 Chicony Electronics Co., Ltd 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 5.0.6
   APT prefers proposed-updates
   APT policy: (500, 'proposed-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-bpo.3-amd64 (SMP w/2 CPU cores)
Locale: LANG=hu_HU, LC_CTYPE=hu_HU (charmap=ISO-8859-2) (ignored: LC_ALL set to hu_HU)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-bpo.5-amd64 depends on:
ii  debconf [debconf-2.0]  1.5.24            Debian configuration management sy
ii  initramfs-tools [linux 0.92o             tools for generating an initramfs
ii  linux-base             2.6.32-23~bpo50+1 Linux image base package
ii  module-init-tools      3.4-1             tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-bpo.5-amd64 recommends:
ii  firmware-linux-free    2.6.32-23~bpo50+1 Binary firmware for various driver

Versions of packages linux-image-2.6.32-bpo.5-amd64 suggests:
ii  grub                       0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn  linux-doc-2.6.32           <none>        (no description available)

Versions of packages linux-image-2.6.32-bpo.5-amd64 is related to:
pn  firmware-bnx2               <none>       (no description available)
pn  firmware-bnx2x              <none>       (no description available)
pn  firmware-ipw2x00            <none>       (no description available)
pn  firmware-ivtv               <none>       (no description available)
ii  firmware-iwlwifi            0.24~bpo50+1 Binary firmware for Intel Wireless
pn  firmware-linux              <none>       (no description available)
ii  firmware-linux-nonfree      0.24~bpo50+1 Binary firmware for various driver
pn  firmware-qlogic             <none>       (no description available)
pn  firmware-ralink             <none>       (no description available)
pn  xen-hypervisor              <none>       (no description available)

-- debconf information:
   shared/kernel-image/really-run-bootloader: true
   linux-image-2.6.32-bpo.5-amd64/prerm/removing-running-kernel-2.6.32-bpo.5-amd64: true
   linux-image-2.6.32-bpo.5-amd64/prerm/would-invalidate-boot-loader-2.6.32-bpo.5-amd64: true
   linux-image-2.6.32-bpo.5-amd64/postinst/missing-firmware-2.6.32-bpo.5-amd64:
   linux-image-2.6.32-bpo.5-amd64/postinst/bootloader-error-2.6.32-bpo.5-amd64:
   linux-image-2.6.32-bpo.5-amd64/postinst/depmod-error-initrd-2.6.32-bpo.5-amd64: false
   linux-image-2.6.32-bpo.5-amd64/postinst/ignoring-do-bootloader-2.6.32-bpo.5-amd64:
   linux-image-2.6.32-bpo.5-amd64/postinst/bootloader-test-error-2.6.32-bpo.5-amd64:



-- 
To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Archive: http://lists.debian.org/Pine.LNX.4.64.1009282255220.7706@aalaptop







--- End Message ---
--- Begin Message ---
Hi,
your bug has been filed against the "linux-2.6" source package and was filed for
a kernel older than the recently released Debian 7.0 / Wheezy with a severity
less than important.

We don't have the ressources to reproduce the complete backlog of all older kernel
bugs, so we're closing this bug for now. If you can reproduce the bug with Debian Wheezy
or a more recent kernel from testing or unstable, please reopen the bug by sending
a mail to control@bugs.debian.org with the following three commands included in the
mail:

reopen BUGNUMBER
reassign BUGNUMBER src:linux
thanks

Cheers,
        Moritz

--- End Message ---

Reply to: