Bug#708064: BUG: Bad page state in process
Package: src:linux
Version: 3.2.41-2
Severity: important
I am continuing to encounter kernel instability since upgrading to wheezy:
[40234.770735] BUG: Bad page state in process sshd pfn:b7100
[40234.776241] page:f62a2000 count:142 mapcount:0 mapping: (null) index:0x7a64
[40234.783307] page flags: 0x8000008d(locked|referenced|uptodate|slab)
[40234.789688] Modules linked in: nfnetlink_log nfnetlink autofs4 sha1_generic hmac cts video ac power_supply binfmt_misc fuse rpcsec_gss_krb5 nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc reiserfs sha256_generic cryptd aes_i586 aes_generic cbc dm_crypt raid1 md_mod i82875p_edac edac_core snd_intel8x0 snd_ac97_codec iTCO_wdt ac97_bus iTCO_vendor_support snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi evdev snd_seq_midi_event rng_core parport_pc parport i2c_i801 i2c_core pcspkr snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc shpchp processor button ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate dm_mod sg sd_mod sr_mod cdrom crc_t10dif usb_storage sata_sil ata_generic floppy ata_piix libata uhci_hcd firewire_ohci fan firewire_core crc_itu_t e1000 thermal thermal_sys ehci_hcd scsi_mod usbcore usb_common [last unloaded: scsi_wait_scan]
[40234.789818] Pid: 28995, comm: sshd Not tainted 3.2.0-4-686-pae #1 Debian 3.2.41-2
[40234.789822] Call Trace:
[40234.789834] [<c109a3cb>] ? bad_page+0xb6/0xcb
[40234.789841] [<c109ae28>] ? get_page_from_freelist+0x2b4/0x36a
[40234.789849] [<c109b02c>] ? __alloc_pages_nodemask+0x14e/0x63e
[40234.789862] [<c1095e3d>] ? find_get_page+0x12/0x52
[40234.789869] [<c1095a69>] ? __page_cache_alloc+0xe/0x10
[40234.789876] [<c109679e>] ? grab_cache_page_write_begin+0x45/0x94
[40234.789896] [<f8345348>] ? ext3_write_begin+0xa0/0x1d2 [ext3]
[40234.789905] [<c109da7e>] ? put_page+0x16/0x24
[40234.789913] [<c1096349>] ? generic_file_buffered_write+0xd8/0x1dd
[40234.789923] [<c1096fe3>] ? __generic_file_aio_write+0x25e/0x282
[40234.789932] [<c103c196>] ? current_fs_time+0x13/0x15
[40234.789940] [<c10dc1d9>] ? touch_atime+0x66/0xd6
[40234.789946] [<c1097064>] ? generic_file_aio_write+0x5d/0xb3
[40234.789958] [<c10cc2c5>] ? wait_on_retry_sync_kiocb+0x3c/0x3c
[40234.789965] [<c10cc36d>] ? do_sync_write+0xa8/0xdc
[40234.789973] [<c10cc887>] ? rw_verify_area+0xc6/0xe7
[40234.789979] [<c10ccb27>] ? vfs_write+0x83/0xd4
[40234.789986] [<c10ccce7>] ? sys_write+0x3d/0x61
[40234.789993] [<c12c6d9f>] ? sysenter_do_call+0x12/0x28
[40234.789998] Disabling lock debugging due to kernel taint
See also my previous report #707867.
-- Package-specific info:
** Version:
Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-686-pae root=/dev/mapper/sys-root ro console=ttyS0,115200n8 quiet
** Tainted: B (32)
* System has hit bad_page.
** Kernel log:
[ 75.719205] REISERFS (device dm-2): Using r5 hash to sort names
[ 75.864184] REISERFS (device dm-8): found reiserfs format "3.6" with standard journal
[ 75.864211] REISERFS (device dm-8): using ordered data mode
[ 75.864214] reiserfs: using flush barriers
[ 75.867930] REISERFS (device dm-8): journal params: device dm-8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 75.868409] REISERFS (device dm-8): checking transaction log (dm-8)
[ 75.918005] REISERFS (device dm-8): Using r5 hash to sort names
[ 76.007943] kjournald starting. Commit interval 5 seconds
[ 76.008335] EXT3-fs (dm-10): using internal journal
[ 76.008342] EXT3-fs (dm-10): mounted filesystem with ordered data mode
[ 76.043306] kjournald starting. Commit interval 5 seconds
[ 76.043895] EXT3-fs (dm-3): using internal journal
[ 76.043902] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 76.060414] kjournald starting. Commit interval 5 seconds
[ 76.060445] EXT3-fs (dm-12): warning: maximal mount count reached, running e2fsck is recommended
[ 76.060871] EXT3-fs (dm-12): using internal journal
[ 76.060877] EXT3-fs (dm-12): mounted filesystem with ordered data mode
[ 77.228226] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 77.245718] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 77.245945] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 80.073855] RPC: Registered named UNIX socket transport module.
[ 80.073863] RPC: Registered udp transport module.
[ 80.073867] RPC: Registered tcp transport module.
[ 80.073871] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 80.120755] FS-Cache: Loaded
[ 80.162200] FS-Cache: Netfs 'nfs' registered for caching
[ 80.178728] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 80.562663] fuse init (API version 7.17)
[ 82.249828] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 82.322677] NFSD: starting 90-second grace period
[ 113.493150] postgres (4270): /proc/4270/oom_adj is deprecated, please use /proc/4270/oom_score_adj instead.
[ 387.767759] RPC: AUTH_GSS upcall timed out.
[ 387.767763] Please check user daemon is running.
[28061.041358] RPC: AUTH_GSS upcall timed out.
[28061.041363] Please check user daemon is running.
[28067.658232] nfsd: last server has exited, flushing export cache
[28068.848881] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[28068.848932] NFSD: starting 90-second grace period
[28176.687800] NFSD: failed to write recovery record (err -17); please check that /var/lib/nfs/v4recovery exists and is writeable
[28342.907661] nfsd: last server has exited, flushing export cache
[28344.084143] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[28344.084174] NFSD: starting 90-second grace period
[28375.118928] RPC: AUTH_GSS upcall timed out.
[28375.118931] Please check user daemon is running.
[28708.466009] NFSD: failed to write recovery record (err -17); please check that /var/lib/nfs/v4recovery exists and is writeable
[29180.614343] Netfilter messages via NETLINK v0.30.
[29180.648037] device eth0 entered promiscuous mode
[29182.438024] device eth0 left promiscuous mode
[40234.770735] BUG: Bad page state in process sshd pfn:b7100
[40234.776241] page:f62a2000 count:142 mapcount:0 mapping: (null) index:0x7a64
[40234.783307] page flags: 0x8000008d(locked|referenced|uptodate|slab)
[40234.789688] Modules linked in: nfnetlink_log nfnetlink autofs4 sha1_generic hmac cts video ac power_supply binfmt_misc fuse rpcsec_gss_krb5 nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc reiserfs sha256_generic cryptd aes_i586 aes_generic cbc dm_crypt raid1 md_mod i82875p_edac edac_core snd_intel8x0 snd_ac97_codec iTCO_wdt ac97_bus iTCO_vendor_support snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi evdev snd_seq_midi_event rng_core parport_pc parport i2c_i801 i2c_core pcspkr snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc shpchp processor button ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate dm_mod sg sd_mod sr_mod cdrom crc_t10dif usb_storage sata_sil ata_generic floppy ata_piix libata uhci_hcd firewire_ohci fan firewire_core crc_itu_t e1000 thermal thermal_sys ehci_hcd scsi_mod usbcore usb_common [last unloaded: scsi_wait_scan]
[40234.789818] Pid: 28995, comm: sshd Not tainted 3.2.0-4-686-pae #1 Debian 3.2.41-2
[40234.789822] Call Trace:
[40234.789834] [<c109a3cb>] ? bad_page+0xb6/0xcb
[40234.789841] [<c109ae28>] ? get_page_from_freelist+0x2b4/0x36a
[40234.789849] [<c109b02c>] ? __alloc_pages_nodemask+0x14e/0x63e
[40234.789862] [<c1095e3d>] ? find_get_page+0x12/0x52
[40234.789869] [<c1095a69>] ? __page_cache_alloc+0xe/0x10
[40234.789876] [<c109679e>] ? grab_cache_page_write_begin+0x45/0x94
[40234.789896] [<f8345348>] ? ext3_write_begin+0xa0/0x1d2 [ext3]
[40234.789905] [<c109da7e>] ? put_page+0x16/0x24
[40234.789913] [<c1096349>] ? generic_file_buffered_write+0xd8/0x1dd
[40234.789923] [<c1096fe3>] ? __generic_file_aio_write+0x25e/0x282
[40234.789932] [<c103c196>] ? current_fs_time+0x13/0x15
[40234.789940] [<c10dc1d9>] ? touch_atime+0x66/0xd6
[40234.789946] [<c1097064>] ? generic_file_aio_write+0x5d/0xb3
[40234.789958] [<c10cc2c5>] ? wait_on_retry_sync_kiocb+0x3c/0x3c
[40234.789965] [<c10cc36d>] ? do_sync_write+0xa8/0xdc
[40234.789973] [<c10cc887>] ? rw_verify_area+0xc6/0xe7
[40234.789979] [<c10ccb27>] ? vfs_write+0x83/0xd4
[40234.789986] [<c10ccce7>] ? sys_write+0x3d/0x61
[40234.789993] [<c12c6d9f>] ? sysenter_do_call+0x12/0x28
[40234.789998] Disabling lock debugging due to kernel taint
[40234.790003] BUG: Bad page state in process sshd pfn:b7101
[40234.795505] page:f62a2020 count:140 mapcount:0 mapping: (null) index:0x7a65
[40234.802563] page flags: 0x8000008c(referenced|uptodate|slab)
[40234.808311] Modules linked in: nfnetlink_log nfnetlink autofs4 sha1_generic hmac cts video ac power_supply binfmt_misc fuse rpcsec_gss_krb5 nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc reiserfs sha256_generic cryptd aes_i586 aes_generic cbc dm_crypt raid1 md_mod i82875p_edac edac_core snd_intel8x0 snd_ac97_codec iTCO_wdt ac97_bus iTCO_vendor_support snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi evdev snd_seq_midi_event rng_core parport_pc parport i2c_i801 i2c_core pcspkr snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc shpchp processor button ext3 mbcache jbd btrfs crc32c libcrc32c zlib_deflate dm_mod sg sd_mod sr_mod cdrom crc_t10dif usb_storage sata_sil ata_generic floppy ata_piix libata uhci_hcd firewire_ohci fan firewire_core crc_itu_t e1000 thermal thermal_sys ehci_hcd scsi_mod usbcore usb_common [last unloaded: scsi_wait_scan]
[40234.808407] Pid: 28995, comm: sshd Tainted: G B 3.2.0-4-686-pae #1 Debian 3.2.41-2
[40234.808410] Call Trace:
[40234.808420] [<c109a3cb>] ? bad_page+0xb6/0xcb
[40234.808425] [<c109ae28>] ? get_page_from_freelist+0x2b4/0x36a
[40234.808430] [<c109b02c>] ? __alloc_pages_nodemask+0x14e/0x63e
[40234.808439] [<c1095e3d>] ? find_get_page+0x12/0x52
[40234.808444] [<c1095a69>] ? __page_cache_alloc+0xe/0x10
[40234.808448] [<c109679e>] ? grab_cache_page_write_begin+0x45/0x94
[40234.808461] [<f8345348>] ? ext3_write_begin+0xa0/0x1d2 [ext3]
[40234.808467] [<c109da7e>] ? put_page+0x16/0x24
[40234.808472] [<c1096349>] ? generic_file_buffered_write+0xd8/0x1dd
[40234.808479] [<c1096fe3>] ? __generic_file_aio_write+0x25e/0x282
[40234.808484] [<c103c196>] ? current_fs_time+0x13/0x15
[40234.808490] [<c10dc1d9>] ? touch_atime+0x66/0xd6
[40234.808494] [<c1097064>] ? generic_file_aio_write+0x5d/0xb3
[40234.808502] [<c10cc2c5>] ? wait_on_retry_sync_kiocb+0x3c/0x3c
[40234.808506] [<c10cc36d>] ? do_sync_write+0xa8/0xdc
[40234.808512] [<c10cc887>] ? rw_verify_area+0xc6/0xe7
[40234.808516] [<c10ccb27>] ? vfs_write+0x83/0xd4
[40234.808520] [<c10ccce7>] ? sys_write+0x3d/0x61
[40234.808525] [<c12c6d9f>] ? sysenter_do_call+0x12/0x28
[43290.165564] ip_tables: (C) 2000-2006 Netfilter Core Team
** Model information
not available
** Loaded modules:
iptable_filter
ip_tables
x_tables
nfnetlink_log
nfnetlink
autofs4
sha1_generic
hmac
cts
video
ac
power_supply
binfmt_misc
fuse
rpcsec_gss_krb5
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
reiserfs
sha256_generic
cryptd
aes_i586
aes_generic
cbc
dm_crypt
raid1
md_mod
i82875p_edac
edac_core
snd_intel8x0
snd_ac97_codec
iTCO_wdt
ac97_bus
iTCO_vendor_support
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_midi
snd_rawmidi
evdev
snd_seq_midi_event
rng_core
parport_pc
parport
i2c_i801
i2c_core
pcspkr
snd_seq
snd_timer
snd_seq_device
snd
soundcore
snd_page_alloc
shpchp
processor
button
ext3
mbcache
jbd
btrfs
crc32c
libcrc32c
zlib_deflate
dm_mod
sg
sd_mod
sr_mod
cdrom
crc_t10dif
usb_storage
sata_sil
ata_generic
floppy
ata_piix
libata
uhci_hcd
firewire_ohci
fan
firewire_core
crc_itu_t
e1000
thermal
thermal_sys
ehci_hcd
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82875P/E7210 Memory Controller Hub [8086:2578] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82875P Processor to AGP Controller [8086:2579] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:03.0 PCI bridge [0604]: Intel Corporation 82875P/E7210 Processor to PCI to CSA Bridge [8086:257b] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: f4000000-f40fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:06.0 System peripheral [0880]: Intel Corporation 82875P/E7210 Processor to I/O Memory Interface [8086:257e] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 00008000-00009fff
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: f3000000-f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: Memory at f4100400 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at c400 [size=4]
Region 2: I/O ports at c800 [size=8]
Region 3: I/O ports at cc00 [size=4]
Region 4: I/O ports at d000 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at d800 [size=256]
Region 1: I/O ports at dc00 [size=64]
Region 2: Memory at f4101000 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at f4102000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
02:01.0 Ethernet controller [0200]: Intel Corporation 82547GI Gigabit Ethernet Controller [8086:1075]
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000
03:02.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: ABIT Computer Corp. Device [147b:1014]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f2004000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
03:03.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3112 [SATALink/SATARaid] Serial ATA Controller [1095:3112] (rev 02)
Subsystem: Silicon Image, Inc. SiI 3112 SATARaid Controller [1095:6112]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 8000 [size=8]
Region 1: I/O ports at 8400 [size=4]
Region 2: I/O ports at 8800 [size=8]
Region 3: I/O ports at 8c00 [size=4]
Region 4: I/O ports at 9000 [size=16]
Region 5: Memory at f2005000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at f0000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
03:09.0 VGA compatible controller [0300]: NVIDIA Corporation NV4 [RIVA TNT] [10de:0020] (rev 04) (prog-if 00 [VGA controller])
Subsystem: STB Systems Inc Velocity 4400 [10b4:2740]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 12
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f3000000 (32-bit, prefetchable) [size=16M]
[virtual] Expansion ROM at f0080000 [disabled] [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 4146:4146 USBest Technology
-- System Information:
Debian Release: 7.0
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-686-pae recommends:
ii firmware-linux-free 3.2
ii libc6-i686 2.13-38
Versions of packages linux-image-3.2.0-4-686-pae suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 1.99-27+deb7u1
ii linux-doc-3.2 3.2.41-2
Versions of packages linux-image-3.2.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-686-pae/postinst/missing-firmware-3.2.0-4-686-pae:
linux-image-3.2.0-4-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-686-pae/postinst/depmod-error-initrd-3.2.0-4-686-pae: false
linux-image-3.2.0-4-686-pae/prerm/removing-running-kernel-3.2.0-4-686-pae: true
Reply to: