--- Begin Message ---
Package: xen-linux-system-2.6-xen-686
Version: 2.6.32+29
Severity: grave
Justification: renders package unusable
After upgrading this machine to squeeze xen is refusing to boot the dom0 and starts printing IO errors.
It doesn't respond to Magic-Sys Rq any longer and all I can see is this in the serial console
Loading Linux 2.6.32-5-xen-686 ...
Loading initial ramdisk ...
(XEN) Xen version 4.0.1 (Debian 4.0.1-5.5) (ultrotter@debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) Thu Dec 6 18:43:02 UTC 2012
(XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1
(XEN) Command line: placeholder loglvl=all guest_loglvl=all com1=115200,8n1 console=com1,vga
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 4 MBR signatures
(XEN) Found 4 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f000 (usable)
(XEN) 000000000009f000 - 00000000000a0000 (reserved)
(XEN) 00000000000d2000 - 00000000000d4000 (reserved)
(XEN) 00000000000e0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000f7ef9000 (usable)
(XEN) 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
(XEN) 00000000f7f00000 - 00000000f7f80000 (usable)
(XEN) 00000000f7f80000 - 00000000f8000000 (reserved)
(XEN) 00000000fec00000 - 00000000fec10000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ff800000 - 00000000ffc00000 (reserved)
(XEN) 00000000fff00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000188000000 (usable)
(XEN) System RAM: 6143MB (6290528kB)
(XEN) ACPI Error (tbxfroot-0220): A valid RSDP was not found [20070126]
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000188000000
(XEN) Xen heap: 8MB (8856kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000f6d10
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) Intel MultiProcessor Specification v1.4
(XEN) Virtual Wire compatibility mode.
(XEN) OEM ID: Product ID: Kings Canyon APIC at: 0xFEE00000
(XEN) Processor #0 15:2 APIC version 20
(XEN) Processor #6 15:2 APIC version 20
(XEN) Processor #1 15:2 APIC version 20
(XEN) Processor #7 15:2 APIC version 20
(XEN) I/O APIC #2 Version 32 at 0xFEC00000.
(XEN) I/O APIC #3 Version 32 at 0xFEC80000.
(XEN) I/O APIC #4 Version 32 at 0xFEC80400.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) Processors: 4
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2399.368 MHz processor.
(XEN) CPU0: Intel Extended MCE MSRs (12) available
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) CPU1: Intel Extended MCE MSRs (12) available
(XEN) CPU2: Intel Extended MCE MSRs (12) available
(XEN) CPU3: Intel Extended MCE MSRs (12) available
(XEN) Total of 4 processors activated.
(XEN) ExtINT not setup in hardware but reported by MP table
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
�(XEN) Allocated console ring of 32 KiB.
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) Brought up 4 CPUs
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0x1000000 -> 0x1651000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000038000000->000000003c000000 (1509043 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c1000000->c1651000
(XEN) Init. ramdisk: c1651000->c2da2e00
(XEN) Phys-Mach map: c2da3000->c3374acc
(XEN) Start info: c3375000->c337547c
(XEN) Page tables: c3376000->c3397000
(XEN) Boot stack: c3397000->c3398000
(XEN) TOTAL: c0000000->c3800000
(XEN) ENTRY ADDRESS: c13ff000
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, offset_in_bytes 258, t_info_first_offset 65
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 152kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 13:33:12 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] xen_release_chunk: looking at area pfn f8000-fec00: 27648 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fec10-fec80: 112 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fec81-fee00: 383 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fee01-ff800: 2559 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn ffc00-fff00: 768 pages freed
[ 0.000000] released 31470 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000f7ef9000 (usable)
[ 0.000000] Xen: 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
[ 0.000000] Xen: 00000000f7f00000 - 00000000f7f80000 (usable)
[ 0.000000] Xen: 00000000f7f80000 - 00000000f8000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000001746b3000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x1746b3 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-000000002cffe000
[ 0.000000] RAMDISK: 01651000 - 02da2e00
[ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[ 0.000000] 5238MB HIGHMEM available.
[ 0.000000] 719MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2cffe000
[ 0.000000] low ram: 0 - 2cffe000
[ 0.000000] node 0 low ram: 00000000 - 2cffe000
[ 0.000000] node 0 bootmap 00010000 - 00015a00
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 002cffe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0003376000 - 0003397000] XEN PAGETABLES ==> [0003376000 - 0003397000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #4 [0001000000 - 000152ba6c] TEXT DATA BSS ==> [0001000000 - 000152ba6c]
[ 0.000000] #5 [0001651000 - 0002da2e00] RAMDISK ==> [0001651000 - 0002da2e00]
[ 0.000000] #6 [0002da3000 - 0003376000] XEN START INFO ==> [0002da3000 - 0003376000]
[ 0.000000] #7 [000152c000 - 000152c11c] BRK ==> [000152c000 - 000152c11c]
[ 0.000000] #8 [0000100000 - 000024b000] PGTABLE ==> [0000100000 - 000024b000]
[ 0.000000] #9 [0000010000 - 0000016000] BOOTMAP ==> [0000010000 - 0000016000]
[ 0.000000] found SMP MP-table at [c00f6d10] f6d10
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002cffe
[ 0.000000] HighMem 0x0002cffe -> 0x001746b3
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000f7ef9
[ 0.000000] 0: 0x000f7f00 -> 0x000f7f80
[ 0.000000] 0: 0x00100000 -> 0x001746b3
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID:
[ 0.000000] MPTABLE: Product ID: Kings Canyon
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000.
[ 0.000000] I/O APIC #3 Version 32 at 0xFEC80000.
[ 0.000000] I/O APIC #4 Version 32 at 0xFEC80400.
[ 0.000000] Processors: 4
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at f8000000 (gap: f8000000:6c00000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c6239000 s37688 r0 d23752 u65536
[ 0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1480493
[ 0.000000] Kernel command line: placeholder root=UUID=1b058ea9-c48c-4ef0-8996-fdbe6568a34e ro console=tty0 console=hvc0 earlyprintk=xen panic=120
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between c633d000 - ca33d000
[ 0.000000] DMA: software IO TLB at phys 0x633d000 - 0xa33d000
[ 0.000000] xen_swiotlb_fixup: buf=c633d000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ca39d000 size=32768
[ 0.000000] Initializing HighMem for node 0 (0002cffe:001746b3)
[ 0.000000] Memory: 5817268k/6101708k available (2639k kernel code, 151364k reserved, 1451k data, 404k init, 5232824k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xf5556000 - 0xf57ff000 (2724 kB)
[ 0.000000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
[ 0.000000] vmalloc : 0xed7fe000 - 0xf4ffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xecffe000 ( 719 MB)
[ 0.000000] .init : 0xc13ff000 - 0xc1464000 ( 404 kB)
[ 0.000000] .data : 0xc1293f33 - 0xc13feb5c (1451 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1293f33 (2639 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1536
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-686 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 13:33:12 UTC 2012
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] xen_release_chunk: looking at area pfn f8000-fec00: 27648 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fec10-fec80: 112 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fec81-fee00: 383 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn fee01-ff800: 2559 pages freed
[ 0.000000] xen_release_chunk: looking at area pfn ffc00-fff00: 768 pages freed
[ 0.000000] released 31470 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] Xen: 000000000009f000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000f7ef9000 (usable)
[ 0.000000] Xen: 00000000f7ef9000 - 00000000f7f00000 (ACPI NVS)
[ 0.000000] Xen: 00000000f7f00000 - 00000000f7f80000 (usable)
[ 0.000000] Xen: 00000000f7f80000 - 00000000f8000000 (reserved)
[ 0.000000] Xen: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved)
[ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] Xen: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] Xen: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000001746b3000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] last_pfn = 0x1746b3 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-000000002cffe000
[ 0.000000] RAMDISK: 01651000 - 02da2e00
[ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
[ 0.000000] 5238MB HIGHMEM available.
[ 0.000000] 719MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2cffe000
[ 0.000000] low ram: 0 - 2cffe000
[ 0.000000] node 0 low ram: 00000000 - 2cffe000
[ 0.000000] node 0 bootmap 00010000 - 00015a00
[ 0.000000] (10 early reservations) ==> bootmem [0000000000 - 002cffe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0003376000 - 0003397000] XEN PAGETABLES ==> [0003376000 - 0003397000]
[ 0.000000] #2 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #3 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #4 [0001000000 - 000152ba6c] TEXT DATA BSS ==> [0001000000 - 000152ba6c]
[ 0.000000] #5 [0001651000 - 0002da2e00] RAMDISK ==> [0001651000 - 0002da2e00]
[ 0.000000] #6 [0002da3000 - 0003376000] XEN START INFO ==> [0002da3000 - 0003376000]
[ 0.000000] #7 [000152c000 - 000152c11c] BRK ==> [000152c000 - 000152c11c]
[ 0.000000] #8 [0000100000 - 000024b000] PGTABLE ==> [0000100000 - 000024b000]
[ 0.000000] #9 [0000010000 - 0000016000] BOOTMAP ==> [0000010000 - 0000016000]
[ 0.000000] found SMP MP-table at [c00f6d10] f6d10
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002cffe
[ 0.000000] HighMem 0x0002cffe -> 0x001746b3
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000f7ef9
[ 0.000000] 0: 0x000f7f00 -> 0x000f7f80
[ 0.000000] 0: 0x00100000 -> 0x001746b3
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID:
[ 0.000000] MPTABLE: Product ID: Kings Canyon
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #2 Version 32 at 0xFEC00000.
[ 0.000000] I/O APIC #3 Version 32 at 0xFEC80000.
[ 0.000000] I/O APIC #4 Version 32 at 0xFEC80400.
[ 0.000000] Processors: 4
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at f8000000 (gap: f8000000:6c00000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.0.1 (preserve-AD) (dom0)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c6239000 s37688 r0 d23752 u65536
[ 0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1480493
[ 0.000000] Kernel command line: placeholder root=UUID=1b058ea9-c48c-4ef0-8996-fdbe6568a34e ro console=tty0 console=hvc0 earlyprintk=xen panic=120
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] DMA: Placing 64MB software IO TLB between c633d000 - ca33d000
[ 0.000000] DMA: software IO TLB at phys 0x633d000 - 0xa33d000
[ 0.000000] xen_swiotlb_fixup: buf=c633d000 size=67108864
[ 0.000000] xen_swiotlb_fixup: buf=ca39d000 size=32768
[ 0.000000] Initializing HighMem for node 0 (0002cffe:001746b3)
[ 0.000000] Initializing HighMem for node 0 (0002cffe:001746b3)
[ 0.000000] Memory: 5817268k/6101708k available (2639k kernel code, 151364k reserved, 1451k data, 404k init, 5232824k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xf5556000 - 0xf57ff000 (2724 kB)
[ 0.000000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
[ 0.000000] vmalloc : 0xed7fe000 - 0xf4ffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xecffe000 ( 719 MB)
[ 0.000000] .init : 0xc13ff000 - 0xc1464000 ( 404 kB)
[ 0.000000] .data : 0xc1293f33 - 0xc13feb5c (1451 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1293f33 (2639 kB)
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1536
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] console [hvc0] enabled, bootconsole disabled
[ 0.000000] installing Xen timer for CPU 0
[ 0.000000] Detected 2399.316 MHz processor.
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4798.63 BogoMIPS (lpj=9597264)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys devices
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] mce: CPU supports 4 MCE banks
[ 0.004000] Performance Events: no PMU driver, software events only.
[ 0.004000] SMP alternatives: switching to UP code
[ 0.008717] installing Xen timer for CPU 1
[ 0.008908] SMP alternatives: switching to SMP code
[ 0.004000] Initializing CPU#1
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 0
[ 0.016551] installing Xen timer for CPU 2
[ 0.004000] Initializing CPU#2
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] Initializing CPU#3
[ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 0
[ 0.018366] Brought up 4 CPUs
[ 0.020101] devtmpfs: initialized
[ 0.020949] Grant table initialized
[ 0.020949] regulator: core version 0.5
[ 0.020949] NET: Registered protocol family 16
[ 0.025099] PCI: PCI BIOS revision 2.10 entry at 0xfd8f5, last bus=4
[ 0.025197] PCI: Using configuration type 1 for base access
[ 0.026620] bio: create slab <bio-0> at 0
[ 0.026620] ACPI: Interpreter disabled.
[ 0.028038] xen_balloon: Initialising balloon driver with page order 0.
[ 0.028268] vgaarb: loaded
[ 0.028408] PCI: Probing PCI hardware
[ 0.029935] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.030056] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO
[ 0.032430] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 0.032559] pci 0000:02:03.0: PME# disabled
[ 0.033104] pci 0000:02:03.1: PME# supported from D0 D3hot D3cold
[ 0.033206] pci 0000:02:03.1: PME# disabled
[ 0.035137] pci 0000:00:1e.0: transparent bridge
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:00.1
(XEN) PCI add device 00:02.0
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.1
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 01:1c.0
(XEN) PCI add device 01:1d.0
(XEN) PCI add device 01:1e.0
(XEN) PCI add device 01:1f.0
(XEN) PCI add device 02:03.0
(XEN) PCI add device 02:03.1
(XEN) PCI add device 03:02.0
(XEN) PCI add device 03:03.0
(XEN) PCI add device 04:01.0
[ 0.036579] vgaarb: device added: PCI:0000:04:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.037019] PCI: Discovered primary peer bus 10 [IRQ]
[ 0.037312] PCI: Discovered primary peer bus 11 [IRQ]
[ 0.037595] PCI: Discovered primary peer bus 12 [IRQ]
[ 0.037721] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:2480]
[ 0.037936] pci 0000:00:1f.1: found PCI INT A -> IRQ 7
[ 0.040157] Switching to clocksource xen
[ 0.044432] pnp: PnP ACPI: disabled
[ 0.044542] PnPBIOS: Disabled
[ 0.046142] pci 0000:01:1d.0: PCI bridge, secondary bus 0000:02
[ 0.046245] pci 0000:01:1d.0: IO window: 0x3000-0x3fff
[ 0.046350] pci 0000:01:1d.0: MEM window: 0xfc200000-0xfc2fffff
[ 0.046452] pci 0000:01:1d.0: PREFETCH window: disabled
[ 0.046565] pci 0000:01:1f.0: PCI bridge, secondary bus 0000:03
[ 0.046663] pci 0000:01:1f.0: IO window: 0x4000-0x4fff
[ 0.046767] pci 0000:01:1f.0: MEM window: 0xfc300000-0xfc3fffff
[ 0.046870] pci 0000:01:1f.0: PREFETCH window: 0xf8000000-0xf80fffff
[ 0.046989] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.047087] pci 0000:00:02.0: IO window: 0x3000-0x4fff
[ 0.047190] pci 0000:00:02.0: MEM window: 0xfc100000-0xfc3fffff
[ 0.047292] pci 0000:00:02.0: PREFETCH window: 0xf8000000-0xf80fffff
[ 0.047405] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.047503] pci 0000:00:1e.0: IO window: 0x5000-0x5fff
[ 0.047607] pci 0000:00:1e.0: MEM window: 0xfc400000-0xfdffffff
[ 0.047710] pci 0000:00:1e.0: PREFETCH window: 0xf8100000-0xf81fffff
[ 0.048130] NET: Registered protocol family 2
[ 0.048386] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.049104] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.050207] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.050873] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.050986] TCP reno registered
[ 0.051312] NET: Registered protocol family 1
[ 0.051502] pci 0000:00:1d.0: found PCI INT A -> IRQ 11
[ 0.051721] pci 0000:00:1d.0: sharing IRQ 11 with 0000:04:01.0
[ 0.052163] Unpacking initramfs...
[ 0.216440] Freeing initrd memory: 23879k freed
[ 0.245064] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.245179] DMA: Placing 64MB software IO TLB between c633d000 - ca33d000
[ 0.245274] DMA: software IO TLB at phys 0x633d000 - 0xa33d000
[ 0.245513] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.246273] audit: initializing netlink socket (disabled)
[ 0.246390] type=2000 audit(1361289210.649:1): initialized
[ 0.251218] highmem bounce pool size: 64 pages
[ 0.251324] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.255395] VFS: Disk quotas dquot_6.5.2
[ 0.255620] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.255925] msgmni has been set to 1190
[ 0.257030] alg: No test for stdrng (krng)
[ 0.257292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.257406] io scheduler noop registered
[ 0.257495] io scheduler anticipatory registered
[ 0.257607] io scheduler deadline registered
[ 0.257791] io scheduler cfq registered (default)
[ 0.258618] isapnp: Scanning for PnP cards...
[ 0.618611] isapnp: No Plug & Play device found
0.635390] registering netback
[ 0.640099] Linux agpgart interface v0.103
[ 0.640579] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.641004] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.641630] PNP: No PS/2 controller found. Probing ports directly.
[ 0.892387] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.892751] mice: PS/2 mouse device common for all mice
[ 0.893077] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.893243] rtc0: alarms up to one day, 114 bytes nvram
[ 0.893356] cpuidle: using governor ladder
[ 0.893445] cpuidle: using governor menu
[ 0.893540] No iBFT detected.
[ 0.894291] TCP cubic registered
[ 0.894670] NET: Registered protocol family 10
[ 0.896151] Mobile IPv6
[ 0.896242] NET: Registered protocol family 17
[ 0.896359] Using IPI No-Shortcut mode
[ 0.896721] registered taskstats version 1
[ 0.897768] rtc_cmos rtc_cmos: setting system clock to 2013-02-19 15:53:31 UTC (1361289211)
[ 0.898028] Initalizing network drop monitor service
[ 0.898209] Freeing unused kernel memory: 404k freed
[ 0.900713] Write protecting the kernel text: 2640k
[ 0.901529] Write protecting the kernel read-only data: 968k
Loading, please wait...
[ 0.991993] udev[81]: starting version 164
[ 1.138661] usbcore: registered new interface driver usbfs
[ 1.138884] usbcore: registered new interface driver hub
[ 1.139149] usbcore: registered new device driver usb
[ 1.180249] SCSI subsystem initialized
[ 1.225395] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.225563] Copyright (c) 1999-2006 Intel Corporation.
[ 1.225803] e1000 0000:02:03.0: found PCI INT A -> IRQ 5
[ 1.226166] e1000 0000:02:03.0: sharing IRQ 5 with 0000:02:03.1
[ 1.226377] e1000 0000:02:03.0: sharing IRQ 5 with 0000:03:02.0
[ 1.226554] e1000 0000:02:03.0: sharing IRQ 5 with 0000:03:03.0
[ 1.231367] sata_sil 0000:03:02.0: found PCI INT A -> IRQ 5
[ 1.231712] sata_sil 0000:03:02.0: sharing IRQ 5 with 0000:02:03.0
[ 1.231852] sata_sil 0000:03:02.0: sharing IRQ 5 with 0000:02:03.1
[ 1.231993] sata_sil 0000:03:02.0: sharing IRQ 5 with 0000:03:03.0
[ 1.232810] scsi0 : sata_sil
[ 1.233310] scsi1 : sata_sil
[ 1.234074] ata1: SATA max UDMA/100 mmio m512@0xfc300000 tf 0xfc300080 irq 5
[ 1.234209] ata2: SATA max UDMA/100 mmio m512@0xfc300000 tf 0xfc3000c0 irq 5
[ 1.234475] sata_sil 0000:03:03.0: found PCI INT A -> IRQ 5
[ 1.234724] sata_sil 0000:03:03.0: sharing IRQ 5 with 0000:02:03.0
[ 1.234856] sata_sil 0000:03:03.0: sharing IRQ 5 with 0000:02:03.1
[ 1.234989] sata_sil 0000:03:03.0: sharing IRQ 5 with 0000:03:02.0
[ 1.235500] scsi2 : sata_sil
[ 1.236584] scsi3 : sata_sil
[ 1.237979] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.238885] ata3: SATA max UDMA/100 mmio m512@0xfc300400 tf 0xfc300480 irq 5
[ 1.238996] ata4: SATA max UDMA/100 mmio m512@0xfc300400 tf 0xfc3004c0 irq 5
[ 1.244257] ata_piix 0000:00:1f.1: found PCI INT A -> IRQ 7
[ 1.245360] scsi4 : ata_piix
[ 1.246020] scsi5 : ata_piix
[ 1.246362] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2060 irq 14
[ 1.246496] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2068 irq 15
[ 1.249512] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.249742] uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11
[ 1.249966] uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:04:01.0
[ 1.250096] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.250236] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.250401] uhci_hcd 0000:00:1d.0: request interrupt 11 failed
[ 1.250498] uhci_hcd 0000:00:1d.0: USB bus 1 deregistered
[ 1.250639] uhci_hcd 0000:00:1d.0: init 0000:00:1d.0 fail, -38
[ 1.250742] uhci_hcd: probe of 0000:00:1d.0 failed with error -38
[ 1.250892] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.251012] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 1
[ 1.251169] uhci_hcd 0000:00:1d.1: request interrupt 10 failed
[ 1.251264] uhci_hcd 0000:00:1d.1: USB bus 1 deregistered
[ 1.251392] uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -38
[ 1.251491] uhci_hcd: probe of 0000:00:1d.1 failed with error -38
[ 1.251639] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.251765] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 1
[ 1.251952] uhci_hcd 0000:00:1d.2: irq 7, io base 0x00002040
[ 1.252231] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.252326] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.252432] usb usb1: Product: UHCI Host Controller
[ 1.252524] usb usb1: Manufacturer: Linux 2.6.32-5-xen-686 uhci_hcd
[ 1.252524] usb usb1: SerialNumber: 0000:00:1d.2
[ 1.252950] usb usb1: configuration #1 chosen from 1 choice
[ 1.253121] hub 1-0:1.0: USB hub found
[ 1.253253] hub 1-0:1.0: 2 ports detected
[ 1.409471] ata6.00: ATAPI: CD-224E, 1.9A, max UDMA/33
[ 1.425368] ata6.00: configured for UDMA/33
[ 1.504208] e1000: 0000:02:03.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2c:e5:d0
[ 1.539403] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 1.539711] e1000 0000:02:03.1: found PCI INT B -> IRQ 5
[ 1.540009] e1000 0000:02:03.1: sharing IRQ 5 with 0000:02:03.0
[ 1.540010] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:02.0
[ 1.540010] e1000 0000:02:03.1: sharing IRQ 5 with 0000:03:03.0
[ 1.553083] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.561063] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.810722] e1000: 0000:02:03.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:48:2c:e5:d1
[ 1.850777] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 6.564081] ata3.00: qc timeout (cmd 0x27)
[ 6.564191] ata3.00: failed to read native max address (err_mask=0x4)
[ 6.564191] ata3.00: failed to read native max address (err_mask=0x4)
[ 6.564298] ata3.00: HPA support seems broken, skipping HPA handling
[ 6.564436] ata1.00: qc timeout (cmd 0x27)
[ 6.564529] ata1.00: failed to read native max address (err_mask=0x4)
[ 6.564621] ata1.00: HPA support seems broken, skipping HPA handling
[ 6.884076] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6.884346] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 6.893335] ata3.00: ATA-7: Maxtor 6B200M0, BANC1B70, max UDMA/133
[ 6.893494] ata1.00: ATA-7: Maxtor 6B200M0, BANC1B70, max UDMA/133
[ 6.893504] ata1.00: 398297088 sectors, multi 0: LBA48 NCQ (not used)
[ 6.893737] ata3.00: 398297088 sectors, multi 0: LBA48 NCQ (not used)
[ 6.908405] ata1.00: configured for UDMA/100
[ 6.908432] ata3.00: configured for UDMA/100
[ 6.908976] scsi 0:0:0:0: Direct-Access ATA Maxtor 6B200M0 BANC PQ: 0 ANSI: 5
[ 7.228078] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.236085] ata2.00: qc timeout (cmd 0x27)
[ 12.236215] ata2.00: failed to read native max address (err_mask=0x4)
[ 12.236308] ata2.00: HPA support seems broken, skipping HPA handling
[ 12.556077] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 12.564289] ata2.00: ATA-7: Maxtor 6B200M0, BANC1B70, max UDMA/133
[ 12.564393] ata2.00: 398297088 sectors, multi 0: LBA48 NCQ (not used)
[ 12.580304] ata2.00: configured for UDMA/100
[ 12.580741] scsi 1:0:0:0: Direct-Access ATA Maxtor 6B200M0 BANC PQ: 0 ANSI: 5
[ 12.581858] scsi 2:0:0:0: Direct-Access ATA Maxtor 6B200M0 BANC PQ: 0 ANSI: 5
[ 12.904084] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 17.912098] ata4.00: qc timeout (cmd 0x27)
[ 17.912200] ata4.00: failed to read native max address (err_mask=0x4)
[ 17.912308] ata4.00: HPA support seems broken, skipping HPA handling
[ 18.232072] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 18.240306] ata4.00: ATA-8: ST3750330AS, SD15, max UDMA/133
[ 18.240407] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 18.256328] ata4.00: configured for UDMA/100
[ 18.256797] scsi 3:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5
[ 18.259736] scsi 5:0:0:0: CD-ROM TEAC CD-224E 1.9A PQ: 0 ANSI: 5
[ 18.279864] sd 0:0:0:0: [sda] 398297088 512-byte logical blocks: (203 GB/189 GiB)
[ 18.281382] sd 0:0:0:0: [sda] Write Protect is off
[ 18.281673] sd 1:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB)
[ 18.282448] sd 1:0:0:0: [sdb] Write Protect is off
[ 18.282467] sd 2:0:0:0: [sdc] 398297088 512-byte logical blocks: (203 GB/189 GiB)
[ 18.282967] sd 2:0:0:0: [sdc] Write Protect is off
[ 18.282988] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.283389] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.283544] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.284434] sdb:
[ 18.285072] sdc:
[ 18.285585] sda:
[ 18.286513] sd 3:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 18.287126] sd 3:0:0:0: [sdd] Write Protect is off
[ 18.287337] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 18.288029] sdd:
[ 48.789075] ata1: lost interrupt (Status 0x50)
[ 48.789102] ata4: lost interrupt (Status 0x50)
[ 48.789159] sd 3:0:0:0: [sdd] Unhandled error code
[ 48.789164] sd 3:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 48.789172] sd 3:0:0:0: [sdd] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 48.789198] end_request: I/O error, dev sdd, sector 0
[ 48.789208] Buffer I/O error on device sdd, logical block 0
[ 48.790005] ata2: lost interrupt (Status 0x50)
[ 48.790168] sd 1:0:0:0: [sdb] Unhandled error code
[ 48.790175] sd 0:0:0:0: [sda] Unhandled error code
[ 48.790183] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 48.790198] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 48.790256] end_request: I/O error, dev sda, sector 0
[ 48.790279] Buffer I/O error on device sda, logical block 0
[ 48.790820] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 48.790996] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 48.791930] end_request: I/O error, dev sdb, sector 0
[ 48.792034] Buffer I/O error on device sdb, logical block 0
[ 48.812062] ata3: lost interrupt (Status 0x50)
[ 48.812186] sd 2:0:0:0: [sdc] Unhandled error code
[ 48.812278] sd 2:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 48.812451] sd 2:0:0:0: [sdc] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 48.813410] end_request: I/O error, dev sdc, sector 0
[ 48.813502] Buffer I/O error on device sdc, logical block 0
[ 78.812084] ata1: lost interrupt (Status 0x50)
[ 78.812244] sd 0:0:0:0: [sda] Unhandled error code
[ 78.812335] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 78.812508] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 78.813438] end_request: I/O error, dev sda, sector 0
[ 78.813556] Buffer I/O error on device sda, logical block 0
[ 79.776072] ata4: lost interrupt (Status 0x50)
[ 79.776081] ata2: lost interrupt (Status 0x50)
[ 79.776129] sd 1:0:0:0: [sdb] Unhandled error code
[ 79.776134] sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
[ 79.776141] sd 1:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 79.776167] end_request: I/O error, dev sdb, sector 0
[ 79.776175] Buffer I/O error on device sdb, logical block 0
[ 79.776832] sd 3:0:0:0: [sdd] Unhandled error code
-- System Information:
Debian Release: 6.0.6
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-xen-686 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xen-linux-system-2.6-xen-686 depends on:
ii xen-linux-system-2.6.32-5-xen 2.6.32-46 Xen system with Linux 2.6.32 on mo
xen-linux-system-2.6-xen-686 recommends no packages.
xen-linux-system-2.6-xen-686 suggests no packages.
-- no debconf information
--- End Message ---