Bug#680737: linux-image-3.2.0-2-amd64: Intel i915: black display after boot
Package: src:linux
Version: 3.2.35-2
Followup-For: Bug #680737
I'm having the same issue with a Dell Vostro 1500 laptop; specs below.
Gedalya <gedalya@gedalya.net> noted that his/her issue seemed to be related to brightness and was simply a matter of the brightness being turned all of the way down; that is not the case here. I can change the brightness of the screen using the hotkeys and notice the backlight changing.
My issue, and I suspect the author's, is a modesetting issue. Sometimes I don't experience this issue and I am dropped to a console as expected; most other times I do experience the issue, and once udev loads my screen flickers and I'm presented with a black screen.
Using the i915.modeset=0 as a kernel parameter indeed drops me to a standard 80x25 console, but that isn't suitable for me.
The ArchWiki has a few workarounds:
1) Placing i915 in the initramfs.
2) Using the kernel parameter "video=SVIDEO-1:d".
I can confirm that both of these work for my hardware, allowing me to use modesetting with i915.
I just want to note that this bug still exists in my version. I will test newer kernels from experimental, but I suspect they will resolve this issue.
--
Nate
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/sda2_crypt ro quiet video=SVIDEO-1:d
** Not tainted
** Kernel log:
[ 14.013235] ACPI: Lid Switch [LID0]
[ 14.013301] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 14.013306] ACPI: Power Button [PWRB]
[ 14.013367] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 14.013371] ACPI: Sleep Button [SLPB]
[ 14.013460] ACPI: Requesting acpi_cpufreq
[ 14.016114] Monitor-Mwait will be used to enter C-1 state
[ 14.016124] Monitor-Mwait will be used to enter C-2 state
[ 14.016130] Monitor-Mwait will be used to enter C-3 state
[ 14.016135] Marking TSC unstable due to TSC halts in idle
[ 14.016149] ACPI: acpi_idle registered with cpuidle
[ 14.016945] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 14.016951] ACPI: Power Button [PWRF]
[ 14.017994] Switching to clocksource hpet
[ 14.171977] wmi: Mapper loaded
[ 14.209602] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.248777] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 14.395409] ACPI: Battery Slot [BAT1] (battery present)
[ 14.402152] ACPI: AC Adapter [ACAD] (on-line)
[ 14.496229] iTCO_vendor_support: vendor-support=0
[ 14.513811] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 14.513934] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 14.514012] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.556558] ACPI: resource 0000:00:1f.3 [io 0x1c20-0x1c3f] conflicts with ACPI region SMBI [io 0x1c20-0x1c2f]
[ 14.556562] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.685496] Error: Driver 'pcspkr' is already registered, aborting...
[ 14.727903] [drm] Initialized drm 1.1.0 20060810
[ 14.730832] input: Dell WMI hotkeys as /devices/virtual/input/input6
[ 14.811105] cfg80211: Calling CRDA to update world regulatory domain
[ 14.909108] i915 0000:00:02.0: setting latency timer to 64
[ 14.953273] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 14.953277] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 14.953702] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 14.953709] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 14.953711] [drm] Driver supports precise vblank timestamp query.
[ 14.953761] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 15.005622] fixme: max PWM is zero.
[ 15.210813] brcmsmac 0000:06:00.0: bus 6 slot 0 func 0 irq 11
[ 15.210873] brcmsmac 0000:06:00.0: setting latency timer to 64
[ 15.276400] [drm] initialized overlay support
[ 15.276447] [drm] forcing SVIDEO-1 connector OFF
[ 15.293276] fbcon: inteldrmfb (fb0) is primary device
[ 15.445199] brcmsmac 0000:06:00.0: firmware: agent loaded brcm/bcm43xx-0.fw into memory
[ 15.459275] brcmsmac 0000:06:00.0: firmware: agent loaded brcm/bcm43xx_hdr-0.fw into memory
[ 15.494360] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.679748] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[ 15.713810] Console: switching to colour frame buffer device 160x50
[ 15.721897] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 15.723384] fb0: inteldrmfb frame buffer device
[ 15.723390] drm: registered panic notifier
[ 15.744915] acpi device:08: registered as cooling_device2
[ 15.745217] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 15.745278] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 15.745949] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 15.746095] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 15.746134] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 15.802204] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 15.803573] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 16.761922] Adding 4192252k swap on /dev/mapper/sda4_crypt. Priority:-1 extents:1 across:4192252k
[ 16.780461] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 17.103271] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 17.697988] loop: module loaded
[ 18.405324] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 19.515442] RPC: Registered named UNIX socket transport module.
[ 19.515446] RPC: Registered udp transport module.
[ 19.515448] RPC: Registered tcp transport module.
[ 19.515450] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.571873] FS-Cache: Loaded
[ 19.788064] FS-Cache: Netfs 'nfs' registered for caching
[ 19.820606] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.945017] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[ 19.945071] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 19.946523] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 19.947091] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.093960] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 22.183881] wlan0: authenticate with 00:21:29:68:78:c6 (try 1)
[ 22.185504] wlan0: authenticated
[ 22.189355] wlan0: associate with 00:21:29:68:78:c6 (try 1)
[ 22.191705] wlan0: RX AssocResp from 00:21:29:68:78:c6 (capab=0x431 status=0 aid=4)
[ 22.191711] wlan0: associated
[ 22.192436] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 22.193970] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated
[ 22.195531] ieee80211 phy0: changing basic rates failed: -22
[ 22.197112] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 22.199344] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 23.669575] Bluetooth: Core ver 2.16
[ 23.669602] NET: Registered protocol family 31
[ 23.669605] Bluetooth: HCI device and connection manager initialized
[ 23.669608] Bluetooth: HCI socket layer initialized
[ 23.669611] Bluetooth: L2CAP socket layer initialized
[ 23.669617] Bluetooth: SCO socket layer initialized
[ 23.694018] Bluetooth: RFCOMM TTY layer initialized
[ 23.694024] Bluetooth: RFCOMM socket layer initialized
[ 23.694027] Bluetooth: RFCOMM ver 1.11
[ 23.756663] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.756667] Bluetooth: BNEP filters: protocol multicast
[ 24.195876] lp: driver loaded but no devices found
[ 24.199645] ppdev: user-space parallel port driver
[ 27.448354] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 33.008146] wlan0: no IPv6 routers present
** Model information
sys_vendor: Dell Inc.
product_name: Vostro1510
product_version: Null
chassis_vendor: Dell Inc.
chassis_version: N/A
bios_vendor: Dell Inc.
bios_version: A15
board_vendor: Dell Inc.
board_name: 0M277C
board_version:
** Loaded modules:
parport_pc
ppdev
lp
parport
bnep
rfcomm
bluetooth
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
snd_hda_codec_realtek
joydev
arc4
brcmsmac
cordic
crc8
brcmutil
snd_hda_intel
mac80211
snd_hda_codec
i915
snd_hwdep
cfg80211
drm_kms_helper
dell_wmi
acpi_cpufreq
drm
i2c_algo_bit
snd_pcm
psmouse
mperf
sparse_keymap
dell_laptop
i2c_i801
i2c_core
iTCO_wdt
iTCO_vendor_support
snd_page_alloc
serio_raw
coretemp
evdev
rfkill
pcspkr
ac
dcdbas
snd_timer
battery
wmi
power_supply
video
snd
processor
button
soundcore
thermal_sys
ext4
crc16
jbd2
mbcache
cryptd
aes_x86_64
aes_generic
xts
gf128mul
dm_crypt
dm_mod
usb_storage
sg
sd_mod
sr_mod
cdrom
crc_t10dif
ata_generic
ahci
ata_piix
libahci
firewire_ohci
r8169
mii
libata
sdhci_pci
sdhci
mmc_core
firewire_core
crc_itu_t
uhci_hcd
ehci_hcd
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Device [1028:0273]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0273]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f8504800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Dell Device [1028:0273]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f8500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c4000000-c7ffffff
Prefetchable memory behind bridge: 00000000cc000000-00000000cdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0000000-f3ffffff
Prefetchable memory behind bridge: 00000000fa000000-00000000fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f4000000-f7ffffff
Prefetchable memory behind bridge: 00000000fc000000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: c0200000-c06fffff
Prefetchable memory behind bridge: 00000000f8600000-00000000f86fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0273]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f8504c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Memory behind bridge: f8200000-f82fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at 1c00 [size=8]
Region 1: I/O ports at 18d4 [size=4]
Region 2: I/O ports at 18d8 [size=8]
Region 3: I/O ports at 18d0 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at f8504000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at c0100000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c20 [size=32]
06:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01)
Subsystem: Dell Wireless 1520 Half-size Mini PCIe Card [1028:000e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: brcmsmac
07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: I/O ports at 5000 [size=256]
Region 2: Memory at f8610000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f8600000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f8620000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
08:05.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Firewire (IEEE 1394) [1217:00f7] (rev 02) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:0273]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f8200000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f8202000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
08:05.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 02) (prog-if 01)
Subsystem: Dell Device [1028:0273]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f8202800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
08:05.3 Mass storage controller [0180]: O2 Micro, Inc. Integrated MS/xD Controller [1217:7130] (rev 01)
Subsystem: Dell Device [1028:0273]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f8201000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) 64MB QDI U2 DISK
-- System Information:
Debian Release: 7.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109
ii kmod 9-2
ii linux-base 3.5
ii module-init-tools 9-2
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-26
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
ii firmware-brcm80211 0.36+wheezy.1
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.36+wheezy.1
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: