[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#695318: linux-image-3.6-trunk-amd64: sdhci driver fails to interact with Ricoh e823 devices



On Fri, 2012-12-07 at 14:45 +0100, Arno Töll wrote:
> Hi Ben,
> 
> On 07.12.2012 03:16, Ben Hutchings wrote:
> > There are also some similar bug reports on bugzilla.kernel.org:
> > 
> > https://bugzilla.kernel.org/show_bug.cgi?id=43370
> > https://bugzilla.kernel.org/show_bug.cgi?id=50011
> > 
> > Do either of those seem to match what you're seeing?
> 
> I did also see the message from bug 50011 (" Will use DMA mode even
> though HW doesn't fully claim to support it.") occasionally after
> messing things up with the setpci calls from above. This message never
> appeared isolated for me though, but only in conjunction with "error
> -110 whilst initialising SD card".
> 
> Bug 43370 does does not seem to deal with the same issue, given my
> reader is detected, and also reports back when a card was inserted.
> 
> 
> By the way: I tried another card today (same type, same manufacturer)
> which seems to work fine. The "bad" card, however, works without
> problems at all on my Rasperry Pi.

Please open a new bug report on bugzilla.kernel.org, under product
'Drivers', component 'MMC/SD'.  Include the PCI ID, the kernel log
showing errors, and your explanation of how this is different from the
other bugs.

Ben.

-- 
Ben Hutchings
Beware of programmers who carry screwdrivers. - Leonard Brandwein

Attachment: signature.asc
Description: This is a digitally signed message part


Reply to: