[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#692225: marked as done (linux-image-3.6-trunk-amd64: screen starts to flicker after suspend-to-disk)

Your message dated Mon, 31 Dec 2012 00:03:57 +0100
with message-id <20121230230357.GA10183@mercury2>
and subject line Re: Bug#692225: [3.2->3.6.4 regression] screen starts to flicker after suspend-to-disk
has caused the Debian Bug report #692225,
regarding linux-image-3.6-trunk-amd64: screen starts to flicker after suspend-to-disk
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
692225: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=692225
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 3.6.4-1~experimental.1
Severity: wishlist

I've recently upgrade from 3.2 to 3.6. Since the upgrade after resuming from
supsend-to-disk the screen starts to flicker and the kernel log contains the
following traceback:

[ 4730.108047] ------------[ cut here ]------------
[ 4730.108073] WARNING: at /build/buildd-linux_3.6.4-1~experimental.1-amd64-QnAy6j/linux-3.6.4/drivers/gpu/drm/i915/intel_display.c:1225 intel_crtc_disable+0x52/0x86 [i915]()
[ 4730.108074] Hardware name: 7458WTH
[ 4730.108076] pipe B assertion failure (expected off, current on)
[ 4730.108125] Modules linked in: <snap>
[ 4730.108161] Pid: 12434, comm: kworker/u:6 Not tainted 3.6-trunk-amd64 #1 Debian 3.6.4-1~experimental.1
[ 4730.108167] Call Trace:
[ 4730.108173]  [<ffffffff8103caa3>] ? warn_slowpath_common+0x78/0x8c
[ 4730.108176]  [<ffffffff8105c375>] ? async_schedule+0xc/0xc
[ 4730.108178]  [<ffffffff8103cb4f>] ? warn_slowpath_fmt+0x45/0x4a
[ 4730.108180]  [<ffffffff8105c375>] ? async_schedule+0xc/0xc
[ 4730.108189]  [<ffffffffa04dfcfc>] ? intel_crtc_disable+0x52/0x86 [i915]
[ 4730.108192]  [<ffffffffa042fe47>] ? drm_helper_disable_unused_functions+0xd0/0xfb [drm_kms_helper]
[ 4730.108195]  [<ffffffffa043061e>] ? drm_helper_resume_force_mode+0xf1/0xff [drm_kms_helper]
[ 4730.108197]  [<ffffffff8105c375>] ? async_schedule+0xc/0xc
[ 4730.108203]  [<ffffffffa04be17f>] ? i915_drm_thaw+0xd4/0x10b [i915]
[ 4730.108208]  [<ffffffffa04be501>] ? i915_resume+0x3b/0x50 [i915]
[ 4730.108212]  [<ffffffff811d607d>] ? pci_legacy_resume+0x39/0x39
[ 4730.108214]  [<ffffffff8126bac3>] ? dpm_run_callback.isra.5+0x26/0x54
[ 4730.108216]  [<ffffffff8126c3aa>] ? device_resume+0xd0/0x110
[ 4730.108218]  [<ffffffff8126c3fe>] ? async_resume+0x14/0x38
[ 4730.108220]  [<ffffffff8105c412>] ? async_run_entry_fn+0x9d/0x174
[ 4730.108222]  [<ffffffff81052bfd>] ? process_one_work+0x17e/0x29d
[ 4730.108224]  [<ffffffff810538ec>] ? worker_thread+0x1fe/0x29f
[ 4730.108226]  [<ffffffff810536ee>] ? manage_workers+0x223/0x223
[ 4730.108227]  [<ffffffff810536ee>] ? manage_workers+0x223/0x223
[ 4730.108229]  [<ffffffff81056d51>] ? kthread+0x67/0x6f
[ 4730.108232]  [<ffffffff81370604>] ? kernel_thread_helper+0x4/0x10
[ 4730.108233]  [<ffffffff81056cea>] ? kthread_freezable_should_stop+0x3c/0x3c
[ 4730.108235]  [<ffffffff81370600>] ? gs_change+0x13/0x13
[ 4730.108236] ---[ end trace 9da7aea57c4d16f6 ]---

After a reboot everything works fine again. If you need any more information,
please feal free to ask.

Kind regards

-- Package-specific info:
** Version:
Linux version 3.6-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Debian 3.6.4-1~experimental.1

** Command line:
BOOT_IMAGE=/vmlinuz-3.6-trunk-amd64 root=/dev/mapper/mercury2-root ro resume=/dev/mapper/mercury2-swap acpi_sleep=s3_bios

** Tainted: W (512)
 * Taint on warning.

** Kernel log:
[ 4729.541111] usb usb8: root hub lost power or was reset
[ 4729.541126] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4729.541143] usb usb2: root hub lost power or was reset
[ 4729.542793] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 4729.542804] pci 0000:00:1e.0: setting latency timer to 64
[ 4729.542820] ahci 0000:00:1f.2: setting latency timer to 64
[ 4729.542846] iwlwifi 0000:03:00.0: RF_KILL bit toggled to enable radio.
[ 4729.544456] dpm_run_callback(): pnp_bus_resume+0x0/0x62 returns -19
[ 4729.544457] PM: Device 00:0a failed to restore: error -19
[ 4729.545458] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 4729.547182] Extended CMOS year: 2000
[ 4729.860042] ata2: SATA link down (SStatus 0 SControl 300)
[ 4729.860070] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4729.861890] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 4729.861893] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 4729.861960] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 4729.861962] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 4729.913721] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 4729.913724] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 4729.913819] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 4729.913822] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 4729.916402] ata1.00: configured for UDMA/133
[ 4729.932170] sd 0:0:0:0: [sda] Starting disk
[ 4729.937887] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 4729.938301] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
[ 4730.008101] usb 1-6: reset high-speed USB device number 3 using ehci_hcd
[ 4730.108047] ------------[ cut here ]------------
[ 4730.108073] WARNING: at /build/buildd-linux_3.6.4-1~experimental.1-amd64-QnAy6j/linux-3.6.4/drivers/gpu/drm/i915/intel_display.c:1225 intel_crtc_disable+0x52/0x86 [i915]()
[ 4730.108074] Hardware name: 7458WTH
[ 4730.108076] pipe B assertion failure (expected off, current on)
[ 4730.108125] Modules linked in: cdc_ether usbnet mii cdc_wdm cdc_acm btusb cpufreq_stats cpufreq_userspace cpufreq_powersave cpufreq_conservative bnep rfcomm bluetooth crc16 input_polldev binfmt_misc uinput nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_LOG xt_limit xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables x_tables ext2 mbcache loop fuse i915 uvcvideo videobuf2_vmalloc videobuf2_memops drm_kms_helper videobuf2_core videodev drm media snd_hda_codec_conexant arc4 i2c_algo_bit iwldvm mac80211 snd_hda_intel snd_hda_codec snd_hwdep coretemp ata_generic e1000e snd_pcm_oss snd_mixer_oss iTCO_wdt iTCO_vendor_support snd_pcm i2c_i801 iwlwifi thinkpad_acpi nvram snd_page_alloc snd_seq_midi snd_seq_midi_event uhci_hcd i2c_core ehci_hcd snd_rawmidi usbcore lpc_ich mfd_core snd_seq usb_common snd_seq_device snd_timer kvm_intel psmouse pcspkr serio_raw acpi_cpufreq snd kvm evdev cfg80211 rfkill mperf soundcore battery tpm_tis
tpm tpm_bios ac video button wmi processor xfs sha256_generic ablk_helper cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod sd_mod crc_t10dif microcode ahci thermal libahci thermal_sys libata scsi_mod
[ 4730.108161] Pid: 12434, comm: kworker/u:6 Not tainted 3.6-trunk-amd64 #1 Debian 3.6.4-1~experimental.1
[ 4730.108167] Call Trace:
[ 4730.108173]  [<ffffffff8103caa3>] ? warn_slowpath_common+0x78/0x8c
[ 4730.108176]  [<ffffffff8105c375>] ? async_schedule+0xc/0xc
[ 4730.108178]  [<ffffffff8103cb4f>] ? warn_slowpath_fmt+0x45/0x4a
[ 4730.108180]  [<ffffffff8105c375>] ? async_schedule+0xc/0xc
[ 4730.108189]  [<ffffffffa04dfcfc>] ? intel_crtc_disable+0x52/0x86 [i915]
[ 4730.108192]  [<ffffffffa042fe47>] ? drm_helper_disable_unused_functions+0xd0/0xfb [drm_kms_helper]
[ 4730.108195]  [<ffffffffa043061e>] ? drm_helper_resume_force_mode+0xf1/0xff [drm_kms_helper]
[ 4730.108197]  [<ffffffff8105c375>] ? async_schedule+0xc/0xc
[ 4730.108203]  [<ffffffffa04be17f>] ? i915_drm_thaw+0xd4/0x10b [i915]
[ 4730.108208]  [<ffffffffa04be501>] ? i915_resume+0x3b/0x50 [i915]
[ 4730.108212]  [<ffffffff811d607d>] ? pci_legacy_resume+0x39/0x39
[ 4730.108214]  [<ffffffff8126bac3>] ? dpm_run_callback.isra.5+0x26/0x54
[ 4730.108216]  [<ffffffff8126c3aa>] ? device_resume+0xd0/0x110
[ 4730.108218]  [<ffffffff8126c3fe>] ? async_resume+0x14/0x38
[ 4730.108220]  [<ffffffff8105c412>] ? async_run_entry_fn+0x9d/0x174
[ 4730.108222]  [<ffffffff81052bfd>] ? process_one_work+0x17e/0x29d
[ 4730.108224]  [<ffffffff810538ec>] ? worker_thread+0x1fe/0x29f
[ 4730.108226]  [<ffffffff810536ee>] ? manage_workers+0x223/0x223
[ 4730.108227]  [<ffffffff810536ee>] ? manage_workers+0x223/0x223
[ 4730.108229]  [<ffffffff81056d51>] ? kthread+0x67/0x6f
[ 4730.108232]  [<ffffffff81370604>] ? kernel_thread_helper+0x4/0x10
[ 4730.108233]  [<ffffffff81056cea>] ? kthread_freezable_should_stop+0x3c/0x3c
[ 4730.108235]  [<ffffffff81370600>] ? gs_change+0x13/0x13
[ 4730.108236] ---[ end trace 9da7aea57c4d16f6 ]---
[ 4730.252134] usb 4-2: reset full-speed USB device number 3 using uhci_hcd
[ 4730.399296] btusb 4-2:1.0: no reset_resume for driver btusb?
[ 4730.399298] btusb 4-2:1.1: no reset_resume for driver btusb?
[ 4730.496138] usb 4-1: reset full-speed USB device number 2 using uhci_hcd
[ 4730.644335] PM: restore of devices complete after 1143.419 msecs
[ 4730.727333] PM: Image restored successfully.
[ 4730.727420] usb 2-4: USB disconnect, device number 2
[ 4730.727336] Restarting tasks ... done.
[ 4730.734083] PM: Basic memory bitmaps freed
[ 4730.737753] cdc_ether 2-4:1.7: wwan0: unregister 'cdc_ether' usb-0000:00:1d.7-4, Mobile Broadband Network Device
[ 4730.741384] video LNXVIDEO:00: Restoring backlight state
[ 4735.428047] usb 2-4: new high-speed USB device number 3 using ehci_hcd
[ 4736.289765] usb 2-4: New USB device found, idVendor=0bdb, idProduct=1900
[ 4736.289772] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4736.289776] usb 2-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[ 4736.289779] usb 2-4: Manufacturer: Ericsson
[ 4736.289782] usb 2-4: SerialNumber: 3541430223099830
[ 4736.299127] cdc_acm 2-4:1.1: ttyACM0: USB ACM device
[ 4736.336505] cdc_acm 2-4:1.3: ttyACM1: USB ACM device
[ 4736.354479] cdc_wdm 2-4:1.5: cdc-wdm0: USB WDM device
[ 4736.358952] cdc_wdm 2-4:1.6: cdc-wdm1: USB WDM device
[ 4736.363591] cdc_ether 2-4:1.7: wwan0: register 'cdc_ether' at usb-0000:00:1d.7-4, Mobile Broadband Network Device, 02:80:37:ec:02:00
[ 4736.373130] cdc_acm 2-4:1.9: ttyACM2: USB ACM device
[ 4738.563707] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 4738.564113] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
[ 4738.612874] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4738.946944] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4739.048281] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4739.048542] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4739.178332] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 4739.178736] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
[ 4739.227429] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 4741.464166] wlan0: authenticate with b8:a3:86:5c:79:f0
[ 4741.467119] wlan0: send auth to b8:a3:86:5c:79:f0 (try 1/3)
[ 4741.668054] wlan0: send auth to b8:a3:86:5c:79:f0 (try 2/3)
[ 4741.872059] wlan0: send auth to b8:a3:86:5c:79:f0 (try 3/3)
[ 4741.874542] wlan0: authenticated
[ 4741.876056] wlan0: associate with b8:a3:86:5c:79:f0 (try 1/3)
[ 4741.880161] wlan0: RX AssocResp from b8:a3:86:5c:79:f0 (capab=0x411 status=0 aid=2)
[ 4741.882958] wlan0: associated

** Model information
sys_vendor: LENOVO
product_name: 7458WTH
product_version: ThinkPad X200
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 6DET40WW (2.04 )
board_vendor: LENOVO
board_name: 7458WTH
board_version: Not Available

** Loaded modules:
cdc_ether
usbnet
mii
cdc_wdm
cdc_acm
btusb
cpufreq_stats
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
bnep
rfcomm
bluetooth
crc16
input_polldev
binfmt_misc
uinput
nf_conntrack_ipv6
nf_defrag_ipv6
ip6table_filter
ip6_tables
xt_LOG
xt_limit
xt_tcpudp
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
iptable_filter
ip_tables
x_tables
ext2
mbcache
loop
fuse
i915
uvcvideo
videobuf2_vmalloc
videobuf2_memops
drm_kms_helper
videobuf2_core
videodev
drm
media
snd_hda_codec_conexant
arc4
i2c_algo_bit
iwldvm
mac80211
snd_hda_intel
snd_hda_codec
snd_hwdep
coretemp
ata_generic
e1000e
snd_pcm_oss
snd_mixer_oss
iTCO_wdt
iTCO_vendor_support
snd_pcm
i2c_i801
iwlwifi
thinkpad_acpi
nvram
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
uhci_hcd
i2c_core
ehci_hcd
snd_rawmidi
usbcore
lpc_ich
mfd_core
snd_seq
usb_common
snd_seq_device
snd_timer
kvm_intel
psmouse
pcspkr
serio_raw
acpi_cpufreq
snd
kvm
evdev
cfg80211
rfkill
mperf
soundcore
battery
tpm_tis
tpm
tpm_bios
ac
video
button
wmi
processor
xfs
sha256_generic
ablk_helper
cryptd
aes_x86_64
aes_generic
cbc
dm_crypt
dm_mod
sd_mod
crc_t10dif
microcode
ahci
thermal
libahci
thermal_sys
libata
scsi_mod

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
	Subsystem: Lenovo Device [17aa:20e0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device [17aa:20e4]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 47
	Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 1800 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
	Subsystem: Lenovo Device [17aa:20e4]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>

00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07)
	Subsystem: Lenovo Device [17aa:20e6]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f2826800 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:03.2 IDE interface [0101]: Intel Corporation Mobile 4 Series Chipset PT IDER Controller [8086:2a46] (rev 07) (prog-if 85 [Master SecO PriO])
	Subsystem: Lenovo Device [17aa:20ea]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: I/O ports at 1828 [size=8]
	Region 1: I/O ports at 180c [size=4]
	Region 2: I/O ports at 1820 [size=8]
	Region 3: I/O ports at 1808 [size=4]
	Region 4: I/O ports at 1810 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_generic

00:03.3 Serial controller [0700]: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection [8086:2a47] (rev 07) (prog-if 02 [16550])
	Subsystem: Lenovo Device [17aa:20ec]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at 1830 [size=8]
	Region 1: Memory at f2624000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
	Subsystem: Lenovo Device [17aa:20ee]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 45
	Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 1840 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:20f0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at 1860 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:20f0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 21
	Region 4: I/O ports at 1880 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:20f0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 22
	Region 4: I/O ports at 18a0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:20f1]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 23
	Region 0: Memory at f2826c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
	Subsystem: Lenovo Device [17aa:20f2]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 46
	Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: c0000000-c01fffff
	Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: f2500000-f25fffff
	Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f0000000-f1ffffff
	Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:20f0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 4: I/O ports at 18c0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:20f0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at 18e0 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
	Subsystem: Lenovo Device [17aa:20f0]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at 1c00 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:20f1]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at f2827000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
	Subsystem: Lenovo Device [17aa:20f5]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Device [17aa:20f8]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 43
	Region 0: I/O ports at 1c48 [size=8]
	Region 1: I/O ports at 183c [size=4]
	Region 2: I/O ports at 1c40 [size=8]
	Region 3: I/O ports at 1838 [size=4]
	Region 4: I/O ports at 1c20 [size=32]
	Region 5: Memory at f2826000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
	Subsystem: Lenovo Device [17aa:20f9]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f2827400 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 1c60 [size=32]
	Kernel driver in use: i801_smbus

03:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4236]
	Subsystem: Intel Corporation Device [8086:1011]
	Physical Slot: 1
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi


** USB devices:
Bus 001 Device 003: ID 17ef:480c Lenovo Integrated Webcam
Bus 002 Device 003: ID 0bdb:1900 Ericsson Business Mobile Networks BV F3507g Mobile Broadband Module
Bus 004 Device 002: ID 08ff:2810 AuthenTec, Inc. AES2810
Bus 004 Device 003: ID 0a5c:2145 Broadcom Corp. Bluetooth with Enhanced Data Rate II
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (650, 'unstable'), (601, 'testing'), (600, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 3.6-trunk-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.6-trunk-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.46
ii  initramfs-tools [linux-initramfs-tool]  0.109
ii  kmod                                    9-2
ii  linux-base                              3.5
ii  module-init-tools                       9-2

Versions of packages linux-image-3.6-trunk-amd64 recommends:
ii  firmware-linux-free  3.1

Versions of packages linux-image-3.6-trunk-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-23.1
pn  linux-doc-3.6           <none>

Versions of packages linux-image-3.6-trunk-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.36
pn  firmware-libertas       <none>
ii  firmware-linux          0.36
ii  firmware-linux-nonfree  0.36
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.6-trunk-amd64/postinst/missing-firmware-3.6-trunk-amd64:
  linux-image-3.6-trunk-amd64/prerm/removing-running-kernel-3.6-trunk-amd64: true
  linux-image-3.6-trunk-amd64/postinst/ignoring-ramdisk:
  linux-image-3.6-trunk-amd64/postinst/depmod-error-initrd-3.6-trunk-amd64: false

-- 
Sebastian Ramacher

Attachment: signature.asc
Description: Digital signature


--- End Message ---
--- Begin Message --- 
Version: 3.7.1-1~experimental.1

On 2012-11-05 11:30:28, Sebastian Ramacher wrote:
> Control: tags -1 + fixed-upstream
> 
> On 2012-11-04 11:19:52, Sebastian Ramacher wrote:
> > thanks for the quick reply. I'll try the 3.7 RC next week and report
> > back if it's fixed.
> 
> I've just tried 3.7 RC 3. The assertion failure is gone and it doesn't
> flicker anymore.

3.7 hit experimental and it's still working for me. Closing.

Regards
-- 
Sebastian Ramacher

Attachment: signature.asc
Description: Digital signature


--- End Message ---
Reply to: