[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#697029: linux-image-3.2.0-4-amd64: i915_hangcheck_ring_idle error makes the computer lag using intel core i7-620 integrated gpu



Package: src:linux
Version: 3.2.35-2
Severity: grave
Justification: renders package unusable

I upgraded my laptop from sqeeze to wheezy.
When using gnome the computer become sluggish after a few minutes. dmesg is
full of : " [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed...
render ring idle [waiting on 75118, at 75120], missed IRQ?"
If I log out and use gnome classic, the problem does not happen.
After some search on the internet, I foud this thread that seems related :
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/761065
I tried to set /sys/module/i915/parameters/semaphores to 1 without any
modifications.
under gnome classic, using "vblank_mode=0 glxgears" in a terminal lead to the
same symptoms.



-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=4389375a-dcb2-4f5d-a97a-3dccc151327e ro quiet irqpoll i915.semaphores=1

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[ 3440.056876] NMI watchdog enabled, takes one hw-pmu counter.
[ 3440.057142] microcode: CPU1 updated to revision 0x3, date = 2011-09-01
[ 3440.057315] CPU1 is up
[ 3440.057434] Booting Node 0 Processor 2 APIC 0x1
[ 3440.057435] smpboot cpu 2: start_ip = 95000
[ 3440.068475] Calibrating delay loop (skipped) already calibrated this CPU
[ 3440.068498] CPU2: Thermal monitoring handled by SMI
[ 3440.088882] NMI watchdog enabled, takes one hw-pmu counter.
[ 3440.089152] microcode: CPU2 updated to revision 0x3, date = 2011-09-01
[ 3440.089329] CPU2 is up
[ 3440.089463] Booting Node 0 Processor 3 APIC 0x5
[ 3440.089464] smpboot cpu 3: start_ip = 95000
[ 3440.100493] Calibrating delay loop (skipped) already calibrated this CPU
[ 3440.100513] CPU3: Thermal monitoring handled by SMI
[ 3440.121137] NMI watchdog enabled, takes one hw-pmu counter.
[ 3440.121590] microcode: CPU3 updated to revision 0x3, date = 2011-09-01
[ 3440.121878] CPU3 is up
[ 3440.124455] ACPI: Waking up from system sleep state S3
[ 3440.317339] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 3440.317669] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 3440.318261] PM: early resume of devices complete after 1.155 msecs
[ 3440.318399] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 3440.318420] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3440.318431] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3440.318464] pci 0000:00:1e.0: setting latency timer to 64
[ 3440.318470] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3440.318494] ahci 0000:00:1f.2: setting latency timer to 64
[ 3440.318680] snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 3440.318699] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 3440.318722] sd 0:0:0:0: [sda] Starting disk
[ 3440.352446] i915 0000:00:02.0: setting latency timer to 64
[ 3440.572500] usb 1-1.4: reset high-speed USB device number 3 using ehci_hcd
[ 3440.636264] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3440.820199] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 3440.820256] sdhci-pci 0000:03:00.0: setting latency timer to 64
[ 3440.924410] usb 2-1.1: reset low-speed USB device number 3 using ehci_hcd
[ 3440.992001] ata5: SATA link down (SStatus 0 SControl 300)
[ 3440.992040] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3440.992080] ata6: SATA link down (SStatus 0 SControl 300)
[ 3440.992115] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3440.997252] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 3440.997392] ata1.00: configured for UDMA/100
[ 3441.016789] ata2.00: configured for UDMA/100
[ 3441.099023] dell_wmi: Received unknown WMI event (0x11)
[ 3441.276156] usb 2-1.6: reset high-speed USB device number 4 using ehci_hcd
[ 3441.440160] usb 2-1.7: reset full-speed USB device number 5 using ehci_hcd
[ 3441.534325] btusb 2-1.7:1.0: no reset_resume for driver btusb?
[ 3441.534330] btusb 2-1.7:1.1: no reset_resume for driver btusb?
[ 3442.219238] PM: resume of devices complete after 1901.679 msecs
[ 3442.219587] PM: Finishing wakeup.
[ 3442.219589] Restarting tasks ... done.
[ 3442.244987] dell_wmi: Received unknown WMI event (0x11)
[ 3442.248552] video LNXVIDEO:00: Restoring backlight state
[ 3443.311377] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 3443.367218] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 3443.367657] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3443.369132] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 3443.369319] iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
[ 3443.518686] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3443.521861] ADDRCONF(NETDEV_UP): wwan0: link is not ready
[ 3450.023676] wlan0: authenticate with 3e:f6:4b:3f:7e:58 (try 1)
[ 3450.026328] wlan0: authenticated
[ 3450.026666] wlan0: associate with 3e:f6:4b:3f:7e:58 (try 1)
[ 3450.035765] wlan0: RX AssocResp from 3e:f6:4b:3f:7e:58 (capab=0x411 status=0 aid=2)
[ 3450.035770] wlan0: associated
[ 3450.043220] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 3456.613927] iwlwifi 0000:02:00.0: Tx aggregation enabled on ra = 3e:f6:4b:3f:7e:58 tid = 0
[ 3461.383924] wlan0: no IPv6 routers present
[ 3615.925491] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75118, at 75120], missed IRQ?
[ 3618.282908] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75138, at 75141], missed IRQ?
[ 3619.791809] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75156, at 75158], missed IRQ?
[ 3621.296703] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75162, at 75164], missed IRQ?
[ 3622.801600] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75168, at 75170], missed IRQ?
[ 3624.306498] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75171, at 75175], missed IRQ?
[ 3625.811401] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75180, at 75182], missed IRQ?
[ 3627.316276] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75191, at 75193], missed IRQ?
[ 3628.821193] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75195, at 75198], missed IRQ?
[ 3630.326105] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75200, at 75203], missed IRQ?
[ 3631.830991] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75205, at 75208], missed IRQ?
[ 3633.355889] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75218, at 75220], missed IRQ?
[ 3634.864800] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75231, at 75234], missed IRQ?
[ 3636.369682] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75240, at 75242], missed IRQ?
[ 3637.874571] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75251, at 75253], missed IRQ?
[ 3639.383468] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75262, at 75264], missed IRQ?
[ 3640.928404] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75286, at 75290], missed IRQ?
[ 3642.433304] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75296, at 75298], missed IRQ?
[ 3643.938216] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75300, at 75303], missed IRQ?
[ 3645.443082] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75305, at 75308], missed IRQ?
[ 3646.947998] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75314, at 75316], missed IRQ?
[ 3648.452889] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75320, at 75324], missed IRQ?
[ 3649.957809] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75325, at 75327], missed IRQ?
[ 3651.462695] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75329, at 75332], missed IRQ?
[ 3652.967593] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75335, at 75337], missed IRQ?
[ 3654.472487] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75339, at 75342], missed IRQ?
[ 3655.993411] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75352, at 75354], missed IRQ?
[ 3657.498311] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75360, at 75362], missed IRQ?
[ 3659.003197] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75369, at 75372], missed IRQ?
[ 3660.516095] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75396, at 75398], missed IRQ?
[ 3662.021001] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75402, at 75406], missed IRQ?
[ 3663.525905] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... render ring idle [waiting on 75407, at 75409], missed IRQ?

** Model information
sys_vendor: Dell Inc.
product_name: Latitude E4310
product_version: 0001
chassis_vendor: Dell Inc.
chassis_version:  
bios_vendor: Dell Inc.
bios_version: A07
board_vendor: Dell Inc.
board_name: 04HKYP
board_version: A00

** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
ppdev
lp
snd_hrtimer
bnep
rfcomm
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
cpufreq_stats
binfmt_misc
uinput
fuse
loop
snd_hda_codec_hdmi
snd_hda_codec_idt
btusb
bluetooth
cdc_ether
usbnet
cdc_acm
mii
cdc_wdm
usbhid
hid
joydev
uvcvideo
videodev
v4l2_compat_ioctl32
media
arc4
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
snd_timer
iwlwifi
coretemp
mac80211
snd
i915
crc32c_intel
sg
dell_wmi
sparse_keymap
i2c_i801
drm_kms_helper
cfg80211
drm
ehci_hcd
psmouse
sdhci_pci
parport_pc
acpi_cpufreq
sdhci
dell_laptop
iTCO_wdt
sr_mod
ghash_clmulni_intel
aesni_intel
aes_x86_64
cdrom
aes_generic
i2c_algo_bit
rfkill
evdev
cryptd
e1000e
dcdbas
mmc_core
serio_raw
pcspkr
i2c_core
soundcore
usbcore
intel_ips
parport
iTCO_vendor_support
mperf
usb_common
wmi
video
battery
button
ac
processor
power_supply
thermal_sys
ext4
crc16
jbd2
mbcache
dm_mod
microcode
sd_mod
crc_t10dif
ahci
libahci
libata
scsi_mod

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02)
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller])
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 60b0 [size=8]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at f54b0000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>

00:16.3 Serial controller [0700]: Intel Corporation 5 Series/3400 Series Chipset KT Controller [8086:3b67] (rev 06) (prog-if 02 [16550])
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 60a0 [size=8]
	Region 1: Memory at f5490000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 05)
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at f5400000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at f5480000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 6040 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f5470000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b57] (rev 05)
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 41
	Region 0: Memory at f5460000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: f4000000-f53fffff
	Prefetchable memory behind bridge: 00000000f5b00000-00000000f5cfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: f2c00000-f3ffffff
	Prefetchable memory behind bridge: 00000000f5900000-00000000f5afffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f1800000-f2bfffff
	Prefetchable memory behind bridge: 00000000f5700000-00000000f58fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=09, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: f0400000-f17fffff
	Prefetchable memory behind bridge: 00000000f5500000-00000000f56fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at f5450000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series/3400 Series Chipset LPC Interface Controller [8086:3b0f] (rev 05)
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b2f] (rev 05) (prog-if 01 [AHCI 1.0])
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 40
	Region 0: I/O ports at 6090 [size=8]
	Region 1: I/O ports at 6080 [size=4]
	Region 2: I/O ports at 6070 [size=8]
	Region 3: I/O ports at 6060 [size=4]
	Region 4: I/O ports at 6020 [size=32]
	Region 5: Memory at f5440000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
	Subsystem: Dell Device [1028:0410]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f5430000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 6000 [size=32]

00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05)
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f5420000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel ips

02:00.0 Network controller [0280]: Intel Corporation Centrino Ultimate-N 6300 [8086:422b] (rev 35)
	Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN [8086:1121]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 42
	Region 0: Memory at f2c00000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi

03:00.0 SD Host controller [0805]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 01)
	Subsystem: Dell Device [1028:0410]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f1800000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci

3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

3f:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02)
	Subsystem: Intel Corporation Device [8086:8086]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0461:4db1 Primax Electronics, Ltd 
Bus 002 Device 003: ID 1bcf:0007 Sunplus Innovation Technology Inc. Optical Mouse
Bus 002 Device 004: ID 413c:8184 Dell Computer Corp. F3607gw v2 Mobile Broadband Module
Bus 002 Device 005: ID 413c:8187 Dell Computer Corp. DW375 Bluetooth Module
Bus 002 Device 006: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor


-- System Information:
Debian Release: 7.0
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'testing-proposed-updates')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=fr_FR.utf8, LC_CTYPE=fr_FR.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.48
ii  initramfs-tools [linux-initramfs-tool]  0.109
ii  kmod                                    9-2
ii  linux-base                              3.5
ii  module-init-tools                       9-2

Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii  firmware-linux-free  3.1

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                2:4.05+dfsg-6+deb7u1
ii  grub-pc                 1.99-23.1
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.36
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
ii  firmware-ralink         0.36
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:


Reply to: