On Mon, 2012-10-22 at 19:18 -0700, Michael Chan wrote: > On Tue, 2012-10-23 at 02:45 +0100, Ben Hutchings wrote: > > Well we knew that much! Is the problem that the system firmware 'owns' > > the WoL control registers so the host can't safely change them? Is it > > possible to *read* the WoL configuration, if not to change it? > > It's a hardware problem and I don't understand all the details. There > is an internal PCIX to PCIE bridge on this chip and it gates the NIC's > PME event. During S5 reset, the bridge gets reset by the BIOS and the > WoL setting done by the driver will no longer work. Newer chip revs > have fixed the problem in hardware. > > The driver reads the pre-boot WoL setting from NVRAM and it becomes the > ethtool WoL default setting. Apparently, it is also not working in this > case. I know that it doesn't work on some LOM designs as the setting is > actually in BIOS NVRAM as opposed to NIC NVRAM. Thanks for the explanation. This does seem to be unfixable, then, unfortunately. Ben. -- Ben Hutchings Never attribute to conspiracy what can adequately be explained by stupidity.
Attachment:
signature.asc
Description: This is a digitally signed message part