Bug#690162: mouse/keyboard stop working after s2ram until hid_logitech reloaded
Hi Jonathan,
Am 11.10.2012 02:11, schrieb Jonathan Nieder:
Michael Schmitt wrote:
Am 11.10.2012 00:23, schrieb Jonathan Nieder:
- What was the first non-working kernel? If you have time to bisect
through the pre-compiled kernels at
http://snapshot.debian.org/package/linux/ to find the oldest broken
and newest non-broken one, that would be very useful.
Dunno if I got you right there, but I will try to test all kernel-packages
between the working and non-working one tomorrow which are available at
snapshot.d.o. What I can tell now: 3.4.1-1~experimental.1 (working);
3.5.2-1~experimental.1 (broken). And I realize now the 3.4 was from
experimental as well and not sid... but I guess that doesn't matter much.
By "bisect" I meant one can try the package halfway between the newest
working and oldest broken version and repeat as necessary, which takes
O(log n) reboots instead of O(n). But since there are only two
kernels in that range to test the distinction doesn't make a
difference. So you understood correctly. :)
Glad to hear! :) And done as requested, see the "full-cycle" dmesg logs
(cold-boot, suspend, resume, modprobe) attached. With
3.5-1~experimental.1 I did test it without X too. After the first
resume, I did suspend again, resumed, stopped X and did check for any
output from /dev/input/mice while moving the mouse >> none. After
modprobing hid_logitech it did work again. And with
3.4.4-1~experimental.1 no issue. So the issue was introduced between
3.4.4-1~experimental.1 and 3.5-1~experimental.1. And the only message
that did keep popping up that looks suspicious to me, "usbhid 2-1.3:1.1:
>reset_resume error 1" as noted in the first message already.
Thanks for the kernel log.
Ciao,
Jonathan
A little digging on my own revealed
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1049623
especially
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1049623/comments/5
(oh I hate ubuntu bugreports.... they get so damn noisy) and
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=dc3c78e43469063c5bf4b744214508f94c4129f9
for a possible fix.
Anything more you need?
regards
Michael
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4-trunk-686-pae (Debian 3.4.4-1~experimental.1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Tue Jun 26 17:58:59 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b7f90000 (usable)
[ 0.000000] BIOS-e820: 00000000b7f90000 - 00000000b7f9e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b7f9e000 - 00000000b7fe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b7fe0000 - 00000000b8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5LD2-SE, BIOS 1301 08/16/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xb7f90 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0B0000000 mask FF8000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 376c4000 - 37b5a000
[ 0.000000] Allocated new RAMDISK: 3722e000 - 376c39a6
[ 0.000000] Move RAMDISK from 00000000376c4000 - 0000000037b599a5 to 3722e000 - 376c39a5
[ 0.000000] ACPI: RSDP 000face0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT b7f90100 0004C (v01 A_M_I_ OEMXSDT 08000716 MSFT 00000097)
[ 0.000000] ACPI: FACP b7f90290 000F4 (v03 A_M_I_ OEMFACP 08000716 MSFT 00000097)
[ 0.000000] ACPI: DSDT b7f90410 085E8 (v01 A0402 A0402000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS b7f9e000 00040
[ 0.000000] ACPI: APIC b7f90390 00080 (v01 A_M_I_ OEMAPIC 08000716 MSFT 00000097)
[ 0.000000] ACPI: OEMB b7f9e040 00066 (v01 A_M_I_ AMI_OEM 08000716 MSFT 00000097)
[ 0.000000] ACPI: HPET b7f98a00 00038 (v01 A_M_I_ OEMHPET 08000716 MSFT 00000097)
[ 0.000000] ACPI: MCFG b7f98a40 0003C (v01 A_M_I_ OEMMCFG 08000716 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2053MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x000b7f90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000b7f90
[ 0.000000] On node 0 totalpages: 753439
[ 0.000000] free_area_init_node: node 0, pgdat c1429040, node_mem_map f5b2e200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4108 pages used for memmap
[ 0.000000] HighMem zone: 521606 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at b8000000 (gap: b8000000:46e00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b3000 s32960 r0 d24384 u57344
[ 0.000000] pcpu-alloc: s32960 r0 d24384 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 747551
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.4-trunk-686-pae root=/dev/mapper/storage1-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:000b7f90)
[ 0.000000] Memory: 2979088k/3014208k available (2885k kernel code, 34668k reserved, 1405k data, 412k init, 2102856k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1431000 - 0xc1498000 ( 412 kB)
[ 0.000000] .data : 0xc12d16a8 - 0xc1430c40 (1405 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12d16a8 (2885 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2404.263 MHz processor.
[ 0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4808.52 BogoMIPS (lpj=9617052)
[ 0.004005] pid_max: default: 32768 minimum: 301
[ 0.004036] Security Framework initialized
[ 0.004040] AppArmor: AppArmor disabled by boot time parameter
[ 0.004053] Mount-cache hash table entries: 512
[ 0.008039] Initializing cgroup subsys cpuacct
[ 0.008041] Initializing cgroup subsys memory
[ 0.008048] Initializing cgroup subsys devices
[ 0.008050] Initializing cgroup subsys freezer
[ 0.008052] Initializing cgroup subsys net_cls
[ 0.008055] Initializing cgroup subsys blkio
[ 0.008059] Initializing cgroup subsys perf_event
[ 0.008086] CPU: Physical Processor ID: 0
[ 0.008087] CPU: Processor Core ID: 0
[ 0.008090] mce: CPU supports 6 MCE banks
[ 0.008097] CPU0: Thermal monitoring enabled (TM2)
[ 0.008099] using mwait in idle threads.
[ 0.008458] ACPI: Core revision 20120320
[ 0.012073] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012430] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056155] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.060003] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.060003] PEBS disabled due to CPU errata.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.060003] CPU 1 irqstacks, hard=f54d4000 soft=f54d6000
[ 0.060003] Booting Node 0, Processors #1
[ 0.008000] Initializing CPU#1
[ 0.068036] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.068074] Brought up 2 CPUs
[ 0.068076] Total of 2 processors activated (9617.05 BogoMIPS).
[ 0.069918] devtmpfs: initialized
[ 0.069918] PM: Registering ACPI NVS region [mem 0xb7f9e000-0xb7fdffff] (270336 bytes)
[ 0.069918] dummy:
[ 0.069918] NET: Registered protocol family 16
[ 0.069918] ACPI: bus type pci registered
[ 0.069918] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.069918] PCI: not using MMCONFIG
[ 0.072077] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.072249] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[ 0.072251] PCI: Using configuration type 1 for base access
[ 0.072764] bio: create slab <bio-0> at 0
[ 0.072764] ACPI: Added _OSI(Module Device)
[ 0.072764] ACPI: Added _OSI(Processor Device)
[ 0.072764] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072764] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.072906] ACPI: EC: Look up EC in DSDT
[ 0.073960] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.079854] ACPI: SSDT b7f9e0b0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.080091] ACPI: Dynamic OEM Table Load:
[ 0.080094] ACPI: SSDT (null) 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.080254] ACPI: SSDT b7f9e280 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.080471] ACPI: Dynamic OEM Table Load:
[ 0.080473] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.080701] ACPI: Interpreter enabled
[ 0.080714] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.080734] ACPI: Using IOAPIC for interrupt routing
[ 0.080753] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.082018] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.082020] PCI: Using MMCONFIG for extended config space
[ 0.086984] ACPI: No dock devices found.
[ 0.086991] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.087039] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.087111] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.087114] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.087116] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.087119] pci_root PNP0A08:00: host bridge window [mem 0xb8010000-0xffffffff] (ignored)
[ 0.087122] PCI: root bus 00: using default resources
[ 0.087151] PCI host bridge to bus 0000:00
[ 0.087154] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.087156] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.087166] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.087210] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.087250] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.087292] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.087308] pci 0000:00:1b.0: reg 10: [mem 0xbbdf8000-0xbbdfbfff 64bit]
[ 0.087373] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.087394] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.087461] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.087485] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.087551] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.087574] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.087612] pci 0000:00:1d.0: reg 20: [io 0x5400-0x541f]
[ 0.087642] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.087680] pci 0000:00:1d.1: reg 20: [io 0x5800-0x581f]
[ 0.087711] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.087749] pci 0000:00:1d.2: reg 20: [io 0x6000-0x601f]
[ 0.087778] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.087816] pci 0000:00:1d.3: reg 20: [io 0x6400-0x641f]
[ 0.087855] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.087873] pci 0000:00:1d.7: reg 10: [mem 0xbbdffc00-0xbbdfffff]
[ 0.087952] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.087970] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.088044] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.088123] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0330 (mask 0003)
[ 0.088126] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.088167] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018f
[ 0.088179] pci 0000:00:1f.1: reg 10: [io 0x8000-0x8007]
[ 0.088188] pci 0000:00:1f.1: reg 14: [io 0x7800-0x7803]
[ 0.088197] pci 0000:00:1f.1: reg 18: [io 0x7400-0x7407]
[ 0.088205] pci 0000:00:1f.1: reg 1c: [io 0x7000-0x7003]
[ 0.088214] pci 0000:00:1f.1: reg 20: [io 0x6800-0x680f]
[ 0.088248] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.088261] pci 0000:00:1f.2: reg 10: [io 0x9800-0x9807]
[ 0.088269] pci 0000:00:1f.2: reg 14: [io 0x9400-0x9403]
[ 0.088277] pci 0000:00:1f.2: reg 18: [io 0x9000-0x9007]
[ 0.088285] pci 0000:00:1f.2: reg 1c: [io 0x8800-0x8803]
[ 0.088292] pci 0000:00:1f.2: reg 20: [io 0x8400-0x840f]
[ 0.088326] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.088340] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.088389] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.088458] pci 0000:04:00.0: [10de:0640] type 00 class 0x030000
[ 0.088468] pci 0000:04:00.0: reg 10: [mem 0xbf000000-0xbfffffff]
[ 0.088480] pci 0000:04:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.088491] pci 0000:04:00.0: reg 1c: [mem 0xbc000000-0xbdffffff 64bit]
[ 0.088498] pci 0000:04:00.0: reg 24: [io 0xe800-0xe87f]
[ 0.088506] pci 0000:04:00.0: reg 30: [mem 0xbef80000-0xbeffffff pref]
[ 0.096018] pci 0000:00:01.0: PCI bridge to [bus 04-04]
[ 0.096023] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.096027] pci 0000:00:01.0: bridge window [mem 0xbc000000-0xbfffffff]
[ 0.096033] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.096080] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.096085] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.096163] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.096184] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
[ 0.096219] pci 0000:02:00.0: reg 18: [mem 0xbbfff000-0xbbffffff 64bit]
[ 0.096268] pci 0000:02:00.0: reg 30: [mem 0xbbfe0000-0xbbfeffff pref]
[ 0.096348] pci 0000:02:00.0: supports D1 D2
[ 0.096350] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.096375] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.096385] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.096389] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.096393] pci 0000:00:1c.3: bridge window [mem 0xbbf00000-0xbbffffff]
[ 0.096428] pci 0000:01:01.0: [1095:3512] type 00 class 0x010400
[ 0.096444] pci 0000:01:01.0: reg 10: [io 0xb800-0xb807]
[ 0.096454] pci 0000:01:01.0: reg 14: [io 0xb400-0xb403]
[ 0.096464] pci 0000:01:01.0: reg 18: [io 0xb000-0xb007]
[ 0.096473] pci 0000:01:01.0: reg 1c: [io 0xa800-0xa803]
[ 0.096483] pci 0000:01:01.0: reg 20: [io 0xa400-0xa40f]
[ 0.096492] pci 0000:01:01.0: reg 24: [mem 0xbbeffc00-0xbbeffdff]
[ 0.096502] pci 0000:01:01.0: reg 30: [mem 0xbbe00000-0xbbe7ffff pref]
[ 0.096529] pci 0000:01:01.0: supports D1 D2
[ 0.096570] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.096574] pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff]
[ 0.096578] pci 0000:00:1e.0: bridge window [mem 0xbbe00000-0xbbefffff]
[ 0.096584] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.096586] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.096602] pci_bus 0000:00: on NUMA node 0
[ 0.096605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.096717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.096754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.096838] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.096878] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.096928] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.096931] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.096932] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.099971] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.100022] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.100066] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.100110] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.100153] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.100197] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.100240] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.100283] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.100347] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.100347] vgaarb: loaded
[ 0.100347] vgaarb: bridge control possible 0000:04:00.0
[ 0.100347] PCI: Using ACPI for IRQ routing
[ 0.100347] PCI: pci_cache_line_size set to 64 bytes
[ 0.100347] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.100347] reserve RAM buffer: 00000000b7f90000 - 00000000b7ffffff
[ 0.100347] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.100347] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.100347] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.104025] Switching to clocksource hpet
[ 0.105776] pnp: PnP ACPI init
[ 0.105789] ACPI: bus type pnp registered
[ 0.105842] pnp 00:00: [bus 00-ff]
[ 0.105845] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.105848] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.105850] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.105853] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.105856] pnp 00:00: [mem 0xb8010000-0xffffffff window]
[ 0.105896] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.105905] pnp 00:01: [mem 0xfed13000-0xfed19fff]
[ 0.105942] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.105946] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.105971] pnp 00:02: [dma 4]
[ 0.105973] pnp 00:02: [io 0x0000-0x000f]
[ 0.105975] pnp 00:02: [io 0x0081-0x0083]
[ 0.105977] pnp 00:02: [io 0x0087]
[ 0.105979] pnp 00:02: [io 0x0089-0x008b]
[ 0.105981] pnp 00:02: [io 0x008f]
[ 0.105983] pnp 00:02: [io 0x00c0-0x00df]
[ 0.106008] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.106019] pnp 00:03: [io 0x0070-0x0071]
[ 0.106027] pnp 00:03: [irq 8]
[ 0.106052] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.106061] pnp 00:04: [io 0x0061]
[ 0.106085] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.106094] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.106098] pnp 00:05: [irq 13]
[ 0.106124] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.106580] pnp 00:06: [irq 7]
[ 0.106583] pnp 00:06: [dma 3]
[ 0.106585] pnp 00:06: [io 0x0378-0x037f]
[ 0.106587] pnp 00:06: [io 0x0778-0x077f]
[ 0.106713] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.106742] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.106744] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.106747] pnp 00:07: [io 0x0290-0x0297]
[ 0.106788] system 00:07: [io 0x0290-0x0297] has been reserved
[ 0.106792] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.106894] pnp 00:08: [io 0x0010-0x001f]
[ 0.106896] pnp 00:08: [io 0x0022-0x003f]
[ 0.106898] pnp 00:08: [io 0x0044-0x005f]
[ 0.106900] pnp 00:08: [io 0x0062-0x0063]
[ 0.106902] pnp 00:08: [io 0x0065-0x006f]
[ 0.106904] pnp 00:08: [io 0x0072-0x007f]
[ 0.106905] pnp 00:08: [io 0x0080]
[ 0.106907] pnp 00:08: [io 0x0084-0x0086]
[ 0.106909] pnp 00:08: [io 0x0088]
[ 0.106911] pnp 00:08: [io 0x008c-0x008e]
[ 0.106913] pnp 00:08: [io 0x0090-0x009f]
[ 0.106915] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.106917] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.106918] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.106920] pnp 00:08: [io 0x0800-0x087f]
[ 0.106922] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.106924] pnp 00:08: [io 0x0480-0x04bf]
[ 0.106927] pnp 00:08: [io 0x0900-0x091f]
[ 0.106929] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.106931] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[ 0.106933] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.106935] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.106998] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.107001] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.107004] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.107007] system 00:08: [io 0x0900-0x091f] has been reserved
[ 0.107009] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.107012] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.107015] system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved
[ 0.107018] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.107021] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107068] pnp 00:09: [io 0x03f6]
[ 0.107109] system 00:09: [io 0x03f6] has been reserved
[ 0.107112] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107162] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.107190] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.107216] pnp 00:0b: [io 0x0060]
[ 0.107218] pnp 00:0b: [io 0x0064]
[ 0.107222] pnp 00:0b: [irq 1]
[ 0.107256] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.107315] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.107317] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.107359] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.107362] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.107365] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107571] pnp 00:0d: [io 0x0200-0x0207]
[ 0.107605] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.107817] pnp 00:0e: [io 0x0330-0x0331]
[ 0.107823] pnp 00:0e: [irq 10]
[ 0.107863] pnp 00:0e: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.108106] pnp 00:0f: [irq 4]
[ 0.108108] pnp 00:0f: [dma 0 disabled]
[ 0.108111] pnp 00:0f: [io 0x03f8-0x03ff]
[ 0.108182] pnp 00:0f: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.108227] pnp 00:10: [mem 0xf0000000-0xf3ffffff]
[ 0.108270] system 00:10: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.108274] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.108399] pnp 00:11: [mem 0x00000000-0x0009ffff]
[ 0.108401] pnp 00:11: [mem 0x000c0000-0x000dffff]
[ 0.108403] pnp 00:11: [mem 0x000e0000-0x000fffff]
[ 0.108405] pnp 00:11: [mem 0x00100000-0xb7ffffff]
[ 0.108408] pnp 00:11: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.108459] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.108463] system 00:11: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.108466] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.108469] system 00:11: [mem 0x00100000-0xb7ffffff] could not be reserved
[ 0.108472] system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.108587] pnp: PnP ACPI: found 18 devices
[ 0.108589] ACPI: ACPI bus type pnp unregistered
[ 0.108592] PnPBIOS: Disabled by ACPI PNP
[ 0.145162] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.145166] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000
[ 0.145183] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.145186] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.145192] pci 0000:00:1c.0: BAR 14: assigned [mem 0xb8000000-0xb81fffff]
[ 0.145195] pci 0000:00:1c.0: BAR 15: assigned [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.145198] pci 0000:00:01.0: PCI bridge to [bus 04-04]
[ 0.145201] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.145205] pci 0000:00:01.0: bridge window [mem 0xbc000000-0xbfffffff]
[ 0.145208] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.145213] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.145215] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.145220] pci 0000:00:1c.0: bridge window [mem 0xb8000000-0xb81fffff]
[ 0.145224] pci 0000:00:1c.0: bridge window [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.145230] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.145233] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.145238] pci 0000:00:1c.3: bridge window [mem 0xbbf00000-0xbbffffff]
[ 0.145245] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.145248] pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff]
[ 0.145253] pci 0000:00:1e.0: bridge window [mem 0xbbe00000-0xbbefffff]
[ 0.145281] pci 0000:00:1e.0: setting latency timer to 64
[ 0.145285] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.145288] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.145290] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.145292] pci_bus 0000:04: resource 1 [mem 0xbc000000-0xbfffffff]
[ 0.145295] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.145297] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.145299] pci_bus 0000:03: resource 1 [mem 0xb8000000-0xb81fffff]
[ 0.145301] pci_bus 0000:03: resource 2 [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.145304] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.145306] pci_bus 0000:02: resource 1 [mem 0xbbf00000-0xbbffffff]
[ 0.145308] pci_bus 0000:01: resource 0 [io 0xa000-0xbfff]
[ 0.145310] pci_bus 0000:01: resource 1 [mem 0xbbe00000-0xbbefffff]
[ 0.145313] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.145315] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.145373] NET: Registered protocol family 2
[ 0.145438] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.145597] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.145964] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.146146] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.146148] TCP: reno registered
[ 0.146151] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.146158] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.146227] NET: Registered protocol family 1
[ 0.146381] pci 0000:04:00.0: Boot video device
[ 0.146390] PCI: CLS 16 bytes, default 64
[ 0.146429] Unpacking initramfs...
[ 0.254473] Freeing initrd memory: 4696k freed
[ 0.256509] audit: initializing netlink socket (disabled)
[ 0.256530] type=2000 audit(1350043926.256:1): initialized
[ 0.268657] highmem bounce pool size: 64 pages
[ 0.268662] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.269218] VFS: Disk quotas dquot_6.5.2
[ 0.269249] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.269329] msgmni has been set to 1720
[ 0.269496] alg: No test for stdrng (krng)
[ 0.269521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.269525] io scheduler noop registered
[ 0.269527] io scheduler deadline registered
[ 0.269540] io scheduler cfq registered (default)
[ 0.269646] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.269723] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.269811] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.269881] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.269902] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.269904] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.270168] intel_idle: does not run on family 6 model 15
[ 0.270197] GHES: HEST is not enabled!
[ 0.270209] isapnp: Scanning for PnP cards...
[ 0.623148] isapnp: No Plug & Play device found
[ 0.623217] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.643555] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.664251] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.664471] Linux agpgart interface v0.103
[ 0.664750] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.664752] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.665257] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.665355] mousedev: PS/2 mouse device common for all mice
[ 0.665402] rtc_cmos 00:03: RTC can wake from S4
[ 0.665510] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.665533] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.665544] cpuidle: using governor ladder
[ 0.665546] cpuidle: using governor menu
[ 0.665663] TCP: cubic registered
[ 0.665699] NET: Registered protocol family 10
[ 0.665920] Mobile IPv6
[ 0.665922] NET: Registered protocol family 17
[ 0.665926] Registering the dns_resolver key type
[ 0.665966] Using IPI No-Shortcut mode
[ 0.666057] PM: Hibernation image not present or could not be loaded.
[ 0.666066] registered taskstats version 1
[ 0.666540] rtc_cmos 00:03: setting system clock to 2012-10-12 12:12:07 UTC (1350043927)
[ 0.666580] Initializing network drop monitor service
[ 0.668177] Freeing unused kernel memory: 412k freed
[ 0.668355] Write protecting the kernel text: 2888k
[ 0.668388] Write protecting the kernel read-only data: 1120k
[ 0.668390] NX-protecting the kernel data: 3256k
[ 0.693131] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.727588] udevd[53]: starting version 175
[ 0.743491] usbcore: registered new interface driver usbfs
[ 0.743519] usbcore: registered new interface driver hub
[ 0.759978] SCSI subsystem initialized
[ 0.761238] usbcore: registered new device driver usb
[ 0.761541] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.761592] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.761596] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.761618] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.761657] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005400
[ 0.761693] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.761695] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.761697] usb usb1: Product: UHCI Host Controller
[ 0.761699] usb usb1: Manufacturer: Linux 3.4-trunk-686-pae uhci_hcd
[ 0.761701] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.762506] hub 1-0:1.0: USB hub found
[ 0.762514] hub 1-0:1.0: 2 ports detected
[ 0.762601] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.762604] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.762611] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.762643] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005800
[ 0.762671] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.762674] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.762676] usb usb2: Product: UHCI Host Controller
[ 0.762678] usb usb2: Manufacturer: Linux 3.4-trunk-686-pae uhci_hcd
[ 0.762680] usb usb2: SerialNumber: 0000:00:1d.1
[ 0.762770] hub 2-0:1.0: USB hub found
[ 0.762774] hub 2-0:1.0: 2 ports detected
[ 0.762850] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.762854] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.762861] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.762893] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006000
[ 0.762921] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.762924] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.762926] usb usb3: Product: UHCI Host Controller
[ 0.762927] usb usb3: Manufacturer: Linux 3.4-trunk-686-pae uhci_hcd
[ 0.762929] usb usb3: SerialNumber: 0000:00:1d.2
[ 0.763627] hub 3-0:1.0: USB hub found
[ 0.763633] hub 3-0:1.0: 2 ports detected
[ 0.763713] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.763716] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.763724] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 0.763758] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006400
[ 0.763787] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.763789] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.763792] usb usb4: Product: UHCI Host Controller
[ 0.763793] usb usb4: Manufacturer: Linux 3.4-trunk-686-pae uhci_hcd
[ 0.763795] usb usb4: SerialNumber: 0000:00:1d.3
[ 0.765195] hub 4-0:1.0: USB hub found
[ 0.765202] hub 4-0:1.0: 2 ports detected
[ 0.766641] libata version 3.00 loaded.
[ 0.766963] ata_piix 0000:00:1f.1: version 2.13
[ 0.767018] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.772569] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.772576] ACPI: Power Button [PWRB]
[ 0.772640] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.772643] ACPI: Power Button [PWRF]
[ 0.774977] [drm] Initialized drm 1.1.0 20060810
[ 0.782396] scsi0 : ata_piix
[ 0.793967] scsi1 : ata_piix
[ 0.795117] ata1: PATA max UDMA/100 cmd 0x8000 ctl 0x7800 bmdma 0x6800 irq 22
[ 0.795121] ata2: PATA max UDMA/100 cmd 0x7400 ctl 0x7000 bmdma 0x6808 irq 22
[ 0.795173] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.795212] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.795647] scsi2 : ata_piix
[ 0.795708] scsi3 : ata_piix
[ 0.795751] ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 23
[ 0.795754] ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 23
[ 0.959146] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 0.959149] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.959471] ata4.00: ATA-7: SAMSUNG HE103UJ, 1AA01113, max UDMA7
[ 0.959477] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.964742] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H54N, 1.00, max UDMA/66
[ 0.980351] ata1.00: configured for UDMA/66
[ 0.980619] ata3.00: configured for UDMA/133
[ 0.980710] ata4.00: configured for UDMA/133
[ 0.983026] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H54N 1.00 PQ: 0 ANSI: 5
[ 0.983322] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 0.983510] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HE103UJ 1AA0 PQ: 0 ANSI: 5
[ 0.984135] wmi: Mapper loaded
[ 0.988549] [drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x096000c1)
[ 0.993901] [drm] nouveau 0000:04:00.0: Checking PRAMIN for VBIOS
[ 0.993952] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.993999] sd 2:0:0:0: [sda] Write Protect is off
[ 0.994002] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.994022] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.994292] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.994337] sd 3:0:0:0: [sdb] Write Protect is off
[ 0.994339] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.994359] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.008562] sda: sda1 sda2 sda3
[ 1.008864] sdb: sdb1 sdb2 sdb3
[ 1.009490] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.009515] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.042981] [drm] nouveau 0000:04:00.0: ... appears to be valid
[ 1.042984] [drm] nouveau 0000:04:00.0: Using VBIOS from PRAMIN
[ 1.042988] [drm] nouveau 0000:04:00.0: BIT BIOS found
[ 1.042990] [drm] nouveau 0000:04:00.0: Bios version 62.94.2a.00
[ 1.042993] [drm] nouveau 0000:04:00.0: TMDS table version 2.0
[ 1.043226] [drm] nouveau 0000:04:00.0: MXM: no VBIOS data, nothing to do
[ 1.043228] [drm] nouveau 0000:04:00.0: DCB version 4.0
[ 1.043231] [drm] nouveau 0000:04:00.0: DCB outp 00: 02000300 00000028
[ 1.043234] [drm] nouveau 0000:04:00.0: DCB outp 01: 01000302 00020030
[ 1.043236] [drm] nouveau 0000:04:00.0: DCB outp 02: 04011310 00000028
[ 1.043238] [drm] nouveau 0000:04:00.0: DCB outp 03: 02011312 00020030
[ 1.043240] [drm] nouveau 0000:04:00.0: DCB outp 04: 010223f1 00c0c083
[ 1.043243] [drm] nouveau 0000:04:00.0: DCB conn 00: 00001030
[ 1.043245] [drm] nouveau 0000:04:00.0: DCB conn 01: 00002130
[ 1.043247] [drm] nouveau 0000:04:00.0: DCB conn 02: 00000210
[ 1.043250] [drm] nouveau 0000:04:00.0: DCB conn 03: 00000211
[ 1.043252] [drm] nouveau 0000:04:00.0: DCB conn 04: 00000213
[ 1.043256] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
[ 1.068352] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
[ 1.071328] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
[ 1.071335] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xE60D
[ 1.072019] usb 1-1: new low-speed USB device number 2 using uhci_hcd
[ 1.072407] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE849
[ 1.072409] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE8AE
[ 1.092256] [drm] nouveau 0000:04:00.0: 0xE8AE: Condition still not met after 20ms, skipping following opcodes
[ 1.094245] [TTM] Zone kernel: Available graphics memory: 440670 kiB
[ 1.094247] [TTM] Zone highmem: Available graphics memory: 1492098 kiB
[ 1.094249] [TTM] Initializing pool allocator
[ 1.094256] [TTM] Initializing DMA pool allocator
[ 1.094266] [drm] nouveau 0000:04:00.0: Detected 1024MiB VRAM (DDR2)
[ 1.095888] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
[ 1.109058] [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
[ 1.109061] [drm] nouveau 0000:04:00.0: TV-1 has no encoders, removing
[ 1.109822] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.109824] [drm] No driver support for vblank timestamp query.
[ 1.114820] [drm] nouveau 0000:04:00.0: 1 available performance level(s)
[ 1.114824] [drm] nouveau 0000:04:00.0: 3: core 550MHz shader 1375MHz memory 400MHz fanspeed 100%
[ 1.114827] [drm] nouveau 0000:04:00.0: c: core 400MHz shader 800MHz memory 399MHz fanspeed 100%
[ 1.219025] [drm] nouveau 0000:04:00.0: allocated 1680x1050 fb: 0x330000, bo f4d17200
[ 1.219100] fbcon: nouveaufb (fb0) is primary device
[ 1.252695] usb 1-1: New USB device found, idVendor=1d34, idProduct=0004
[ 1.252697] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.252700] usb 1-1: Product: DL100B Dream Cheeky Generic Controller
[ 1.252701] usb 1-1: Manufacturer: Dream Link
[ 1.256141] Refined TSC clocksource calibration: 2404.112 MHz.
[ 1.256146] Switching to clocksource tsc
[ 1.258905] Console: switching to colour frame buffer device 210x65
[ 1.259799] usbcore: registered new interface driver usbhid
[ 1.259801] usbhid: USB HID core driver
[ 1.261096] fb0: nouveaufb frame buffer device
[ 1.261098] drm: registered panic notifier
[ 1.261102] [drm] Initialized nouveau 1.0.0 20120316 for 0000:04:00.0 on minor 0
[ 1.297242] mdadm: sending ioctl 800c0910 to a partition!
[ 1.297245] mdadm: sending ioctl 800c0910 to a partition!
[ 1.297256] mdadm: sending ioctl 1261 to a partition!
[ 1.297258] mdadm: sending ioctl 1261 to a partition!
[ 1.297498] mdadm: sending ioctl 1261 to a partition!
[ 1.297502] mdadm: sending ioctl 1261 to a partition!
[ 1.322436] mdadm: sending ioctl 1261 to a partition!
[ 1.322439] mdadm: sending ioctl 1261 to a partition!
[ 1.322611] mdadm: sending ioctl 1261 to a partition!
[ 1.322614] mdadm: sending ioctl 1261 to a partition!
[ 1.327287] md: md0 stopped.
[ 1.328178] md: bind<sdb2>
[ 1.328447] md: bind<sda2>
[ 1.329826] md: raid1 personality registered for level 1
[ 1.331482] bio: create slab <bio-1> at 1
[ 1.331544] md/raid1:md0: active with 2 out of 2 mirrors
[ 1.331560] md0: detected capacity change from 0 to 501612544
[ 1.336208] md0: unknown partition table
[ 1.342173] md: md1 stopped.
[ 1.343474] md: bind<sdb3>
[ 1.343668] md: bind<sda3>
[ 1.346232] md/raid1:md1: active with 2 out of 2 mirrors
[ 1.346248] md1: detected capacity change from 0 to 959495274496
[ 1.349476] device-mapper: uevent: version 1.0.3
[ 1.349529] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.364181] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 1.365997] md1: unknown partition table
[ 1.514682] usb 2-1: New USB device found, idVendor=0451, idProduct=1446
[ 1.514687] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.517730] hub 2-1:1.0: USB hub found
[ 1.519682] hub 2-1:1.0: 4 ports detected
[ 1.636073] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[ 1.813678] usb 2-2: New USB device found, idVendor=046d, idProduct=c505
[ 1.813682] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.813686] usb 2-2: Product: USB Receiver
[ 1.813688] usb 2-2: Manufacturer: Logitech
[ 1.830977] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input3
[ 1.831026] generic-usb 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[ 1.864151] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input4
[ 1.864232] generic-usb 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[ 1.976111] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.139928] usb 3-2: New USB device found, idVendor=058f, idProduct=6362
[ 2.139933] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.139936] usb 3-2: Product: Mass Storage Device
[ 2.139939] usb 3-2: Manufacturer: Generic
[ 2.139941] usb 3-2: SerialNumber: 058F63626376
[ 2.252110] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.433796] usb 4-1: New USB device found, idVendor=03f0, idProduct=0a01
[ 2.433800] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=12
[ 2.433803] usb 4-1: Product: hp scanjet scanner
[ 2.433806] usb 4-1: Manufacturer: Hewlett-Packard
[ 2.433808] usb 4-1: SerialNumber: CN34QS114Q
[ 2.509680] usb 2-1.3: new low-speed USB device number 4 using uhci_hcd
[ 2.647678] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c517
[ 2.647682] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.647685] usb 2-1.3: Product: USB Receiver
[ 2.647688] usb 2-1.3: Manufacturer: Logitech
[ 2.664972] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 2.665019] logitech 0003:046D:C517.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input0
[ 2.695681] logitech 0003:046D:C517.0004: fixing up Logitech keyboard report descriptor
[ 2.696354] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input6
[ 2.696544] logitech 0003:046D:C517.0004: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input1
[ 16.165001] scsi_verify_blk_ioctl: 96 callbacks suppressed
[ 16.165004] mdadm: sending ioctl 1261 to a partition!
[ 16.165007] mdadm: sending ioctl 1261 to a partition!
[ 16.606062] kjournald starting. Commit interval 5 seconds
[ 16.606091] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 19.022405] udevd[468]: starting version 175
[ 20.187001] mdadm: sending ioctl 1261 to a partition!
[ 20.187004] mdadm: sending ioctl 1261 to a partition!
[ 20.187007] mdadm: sending ioctl 1261 to a partition!
[ 20.187010] mdadm: sending ioctl 1261 to a partition!
[ 20.329784] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
[ 20.413802] ACPI: Requesting acpi_cpufreq
[ 20.834613] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
[ 20.838768] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 20.869691] coretemp coretemp.0: Using relative temperature scale!
[ 20.869701] coretemp coretemp.0: Using relative temperature scale!
[ 20.894959] parport_pc 00:06: reported by Plug and Play ACPI
[ 20.895062] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 21.015322] intel_rng: FWH not detected
[ 21.025000] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 21.040993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 21.040996] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 21.041035] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 21.041038] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 21.041049] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 21.041064] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 21.041073] ehci_hcd 0000:00:1d.7: debug port 1
[ 21.044962] ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
[ 21.044970] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xbbdffc00
[ 21.056037] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 21.056066] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 21.056070] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.056074] usb usb5: Product: EHCI Host Controller
[ 21.056076] usb usb5: Manufacturer: Linux 3.4-trunk-686-pae ehci_hcd
[ 21.056079] usb usb5: SerialNumber: 0000:00:1d.7
[ 21.056227] hub 5-0:1.0: USB hub found
[ 21.056233] hub 5-0:1.0: 8 ports detected
[ 21.056338] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20120320/utaddress-251)
[ 21.056344] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 21.185118] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 806kHz
[ 21.232061] usb 1-1: USB disconnect, device number 2
[ 21.318240] iTCO_vendor_support: vendor-support=0
[ 21.324511] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 21.324601] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 21.324650] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.360055] usb 2-1: USB disconnect, device number 2
[ 21.360060] usb 2-1.3: USB disconnect, device number 4
[ 21.461549] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 21.461663] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 21.461853] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8366000, 00:1a:92:9d:e5:f5, XID 18000000 IRQ 43
[ 21.461856] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 21.500050] usb 2-2: USB disconnect, device number 3
[ 21.540832] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 21.540836] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 21.540986] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 21.557224] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 21.557262] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 21.557296] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 21.559068] leds_ss4200: no LED devices found
[ 21.656060] usb 3-2: USB disconnect, device number 2
[ 21.665456] usbcore: registered new interface driver usbled
[ 21.697585] usbcore: registered new interface driver uas
[ 21.700904] Initializing USB Mass Storage driver...
[ 21.700939] usbcore: registered new interface driver usb-storage
[ 21.700941] USB Mass Storage support registered.
[ 21.741172] sata_sil 0000:01:01.0: version 2.4
[ 21.741539] scsi4 : sata_sil
[ 21.742736] scsi5 : sata_sil
[ 21.742805] ata5: SATA max UDMA/100 mmio m512@0xbbeffc00 tf 0xbbeffc80 irq 21
[ 21.742809] ata6: SATA max UDMA/100 mmio m512@0xbbeffc00 tf 0xbbeffcc0 irq 21
[ 21.784064] usb 4-1: USB disconnect, device number 2
[ 21.797937] Btrfs loaded
[ 22.060061] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 22.068310] ata5.00: ATA-7: SAMSUNG HD161HJ, JF100-15, max UDMA7
[ 22.068315] ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 22.076291] ata5.00: configured for UDMA/100
[ 22.076430] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 22.076638] sd 4:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 22.076661] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 22.076708] sd 4:0:0:0: [sdc] Write Protect is off
[ 22.076712] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 22.076850] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.084187] sdc: sdc1
[ 22.084491] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 22.207724] mdadm: sending ioctl 800c0910 to a partition!
[ 22.207728] mdadm: sending ioctl 800c0910 to a partition!
[ 22.207737] mdadm: sending ioctl 1261 to a partition!
[ 22.207739] mdadm: sending ioctl 1261 to a partition!
[ 22.248042] usb 5-6: new high-speed USB device number 5 using ehci_hcd
[ 22.271473] mdadm: sending ioctl 800c0910 to a partition!
[ 22.271476] mdadm: sending ioctl 800c0910 to a partition!
[ 22.271484] mdadm: sending ioctl 1261 to a partition!
[ 22.271486] mdadm: sending ioctl 1261 to a partition!
[ 22.271830] mdadm: sending ioctl 1261 to a partition!
[ 22.271832] mdadm: sending ioctl 1261 to a partition!
[ 22.381888] usb 5-6: New USB device found, idVendor=058f, idProduct=6362
[ 22.381893] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 22.381897] usb 5-6: Product: Mass Storage Device
[ 22.381900] usb 5-6: Manufacturer: Generic
[ 22.381902] usb 5-6: SerialNumber: 058F63626376
[ 22.382304] scsi6 : usb-storage 5-6:1.0
[ 22.396029] ata6: SATA link down (SStatus 0 SControl 310)
[ 22.529854] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 22.732014] usb 2-1: new full-speed USB device number 5 using uhci_hcd
[ 22.882684] usb 2-1: New USB device found, idVendor=0451, idProduct=1446
[ 22.882689] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 22.885738] hub 2-1:1.0: USB hub found
[ 22.887683] hub 2-1:1.0: 4 ports detected
[ 22.912291] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 23.132016] usb 2-2: new low-speed USB device number 6 using uhci_hcd
[ 23.309681] usb 2-2: New USB device found, idVendor=046d, idProduct=c505
[ 23.309686] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 23.309689] usb 2-2: Product: USB Receiver
[ 23.309692] usb 2-2: Manufacturer: Logitech
[ 23.327003] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input9
[ 23.327114] generic-usb 0003:046D:C505.0005: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[ 23.360252] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input10
[ 23.360393] generic-usb 0003:046D:C505.0006: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[ 23.382152] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 23.382648] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 23.383153] scsi 6:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[ 23.383652] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 23.385554] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 23.386295] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 23.387874] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 23.388157] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 23.393022] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 23.395203] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 23.396537] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 23.397266] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 23.600023] usb 1-1: new low-speed USB device number 3 using uhci_hcd
[ 23.782694] usb 1-1: New USB device found, idVendor=1d34, idProduct=0004
[ 23.782697] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 23.782699] usb 1-1: Product: DL100B Dream Cheeky Generic Controller
[ 23.782701] usb 1-1: Manufacturer: Dream Link
[ 23.789695] usbled 1-1:1.0: USB LED device now attached
[ 24.028018] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[ 24.209800] usb 4-1: New USB device found, idVendor=03f0, idProduct=0a01
[ 24.209805] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=12
[ 24.209809] usb 4-1: Product: hp scanjet scanner
[ 24.209811] usb 4-1: Manufacturer: Hewlett-Packard
[ 24.209814] usb 4-1: SerialNumber: CN34QS114Q
[ 24.285687] usb 2-1.3: new low-speed USB device number 7 using uhci_hcd
[ 24.425684] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c517
[ 24.425689] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 24.425692] usb 2-1.3: Product: USB Receiver
[ 24.425695] usb 2-1.3: Manufacturer: Logitech
[ 24.443089] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input11
[ 24.443244] logitech 0003:046D:C517.0007: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input0
[ 24.474690] logitech 0003:046D:C517.0008: fixing up Logitech keyboard report descriptor
[ 24.475585] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input12
[ 24.475790] logitech 0003:046D:C517.0008: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input1
[ 25.284524] EXT3-fs (dm-1): using internal journal
[ 25.601669] fuse init (API version 7.18)
[ 25.686788] loop: module loaded
[ 25.748196] w83627ehf: Found W83627EHG chip at 0x290
[ 25.748226] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.HWRE 1 (20120320/utaddress-251)
[ 25.748232] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 28.228561] scsi_verify_blk_ioctl: 330 callbacks suppressed
[ 28.228565] mdadm: sending ioctl 1261 to a partition!
[ 28.228568] mdadm: sending ioctl 1261 to a partition!
[ 31.288134] kjournald starting. Commit interval 5 seconds
[ 31.313662] EXT3-fs (dm-2): using internal journal
[ 31.313667] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 31.337115] kjournald starting. Commit interval 5 seconds
[ 31.368249] EXT3-fs (md0): using internal journal
[ 31.368251] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 31.667180] EXT4-fs (dm-3): warning: maximal mount count reached, running e2fsck is recommended
[ 31.694506] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 31.738996] kjournald starting. Commit interval 5 seconds
[ 31.739026] EXT3-fs (dm-4): warning: maximal mount count reached, running e2fsck is recommended
[ 31.744337] EXT3-fs (dm-4): using internal journal
[ 31.744341] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 31.786194] kjournald starting. Commit interval 5 seconds
[ 31.786651] EXT3-fs (dm-5): using internal journal
[ 31.786655] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 33.175954] Bridge firewalling registered
[ 33.214442] device eth0 entered promiscuous mode
[ 33.248995] r8169 0000:02:00.0: eth0: link down
[ 33.249218] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.251758] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 35.125857] r8169 0000:02:00.0: eth0: link up
[ 35.126062] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 35.126848] br0: port 1(eth0) entered forwarding state
[ 35.126854] br0: port 1(eth0) entered forwarding state
[ 35.127057] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 37.909956] RPC: Registered named UNIX socket transport module.
[ 37.909960] RPC: Registered udp transport module.
[ 37.909962] RPC: Registered tcp transport module.
[ 37.909965] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 38.036706] FS-Cache: Loaded
[ 38.179743] NFS: Registering the id_resolver key type
[ 38.179761] FS-Cache: Netfs 'nfs' registered for caching
[ 38.216562] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 41.422824] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 41.427091] NFSD: starting 90-second grace period
[ 42.106232] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 45.920006] br0: no IPv6 routers present
[ 48.433348] Bluetooth: Core ver 2.16
[ 48.433366] NET: Registered protocol family 31
[ 48.433368] Bluetooth: HCI device and connection manager initialized
[ 48.433371] Bluetooth: HCI socket layer initialized
[ 48.433373] Bluetooth: L2CAP socket layer initialized
[ 48.433377] Bluetooth: SCO socket layer initialized
[ 48.463759] Bluetooth: RFCOMM TTY layer initialized
[ 48.463764] Bluetooth: RFCOMM socket layer initialized
[ 48.463766] Bluetooth: RFCOMM ver 1.11
[ 48.674756] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 48.674760] Bluetooth: BNEP filters: protocol multicast
[ 48.724971] lp0: using parport0 (interrupt-driven).
[ 48.736731] ppdev: user-space parallel port driver
[ 50.144009] br0: port 1(eth0) entered forwarding state
[ 55.769226] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 56.090258] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 56.157410] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 57.398034] Ebtables v2.0 registered
[ 57.609547] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 209.302302] mdadm: sending ioctl 1261 to a partition!
[ 209.302307] mdadm: sending ioctl 1261 to a partition!
[ 209.333529] mdadm: sending ioctl 1261 to a partition!
[ 209.333533] mdadm: sending ioctl 1261 to a partition!
[ 213.482857] mdadm: sending ioctl 1261 to a partition!
[ 213.482861] mdadm: sending ioctl 1261 to a partition!
[ 214.037143] mdadm: sending ioctl 1261 to a partition!
[ 214.037146] mdadm: sending ioctl 1261 to a partition!
[ 214.171646] mdadm: sending ioctl 1261 to a partition!
[ 214.171650] mdadm: sending ioctl 1261 to a partition!
[ 214.420315] mdadm: sending ioctl 1261 to a partition!
[ 214.420319] mdadm: sending ioctl 1261 to a partition!
[ 214.511647] mdadm: sending ioctl 1261 to a partition!
[ 214.511650] mdadm: sending ioctl 1261 to a partition!
[ 214.612277] mdadm: sending ioctl 1261 to a partition!
[ 214.612281] mdadm: sending ioctl 1261 to a partition!
[ 214.716758] mdadm: sending ioctl 1261 to a partition!
[ 214.716761] mdadm: sending ioctl 1261 to a partition!
[ 214.809519] mdadm: sending ioctl 1261 to a partition!
[ 214.809523] mdadm: sending ioctl 1261 to a partition!
[ 218.680348] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 218.709920] JFS: nTxBlock = 8192, nTxLock = 65536
[ 218.776933] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 218.866066] QNX4 filesystem 0.2.3 registered.
[ 276.972939] PM: Syncing filesystems ... done.
[ 276.988661] PM: Preparing system for mem sleep
[ 277.022305] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 277.036086] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 277.052075] PM: Entering mem sleep
[ 277.052100] Suspending console(s) (use no_console_suspend to debug)
[ 277.052482] usbled 1-1:1.0: USB LED now disconnected
[ 277.052626] sd 4:0:0:0: [sdc] Synchronizing SCSI cache
[ 277.052739] sd 4:0:0:0: [sdc] Stopping disk
[ 277.052849] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[ 277.052923] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 277.053115] sd 2:0:0:0: [sda] Stopping disk
[ 277.066713] serial 00:0f: disabled
[ 277.066720] serial 00:0f: wake-up capability disabled by ACPI
[ 277.066729] i8042 kbd 00:0b: wake-up capability enabled by ACPI
[ 277.066887] parport_pc 00:06: disabled
[ 277.066917] [drm] nouveau 0000:04:00.0: Disabling display...
[ 277.108737] sd 3:0:0:0: [sdb] Stopping disk
[ 277.122315] [drm] nouveau 0000:04:00.0: Disabling fbcon...
[ 277.122319] [drm] nouveau 0000:04:00.0: Unpinning framebuffer(s)...
[ 277.122354] [drm] nouveau 0000:04:00.0: Evicting buffers...
[ 277.168146] ACPI handle has no context!
[ 277.214962] [drm] nouveau 0000:04:00.0: Idling channels...
[ 277.215137] [drm] nouveau 0000:04:00.0: Suspending GPU objects...
[ 278.253625] [drm] nouveau 0000:04:00.0: And we're gone!
[ 278.268112] PM: suspend of devices complete after 1215.740 msecs
[ 278.268361] PM: late suspend of devices complete after 0.245 msecs
[ 278.268506] pcieport 0000:00:1c.3: wake-up capability enabled by ACPI
[ 278.284194] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 278.300113] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
[ 278.300140] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[ 278.300167] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[ 278.300194] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 278.300224] PM: noirq suspend of devices complete after 31.860 msecs
[ 278.301154] ACPI: Preparing to enter system sleep state S3
[ 278.301366] PM: Saving platform NVS memory
[ 278.301767] Disabling non-boot CPUs ...
[ 278.404034] CPU 1 is now offline
[ 278.404488] ACPI: Low-level resume complete
[ 278.404488] PM: Restoring platform NVS memory
[ 278.404488] Enabling non-boot CPUs ...
[ 278.404488] Booting Node 0 Processor 1 APIC 0x1
[ 278.303074] Initializing CPU#1
[ 278.418102] NMI watchdog: enabled, takes one hw-pmu counter.
[ 278.420047] CPU1 is up
[ 278.422166] ACPI: Waking up from system sleep state S3
[ 278.422576] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 278.422601] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 278.422625] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[ 278.422649] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
[ 278.422686] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 278.423096] PM: noirq resume of devices complete after 0.731 msecs
[ 278.423192] PM: early resume of devices complete after 0.064 msecs
[ 278.423261] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 278.423318] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 278.423343] [drm] nouveau 0000:04:00.0: We're back, enabling device...
[ 278.423342] usb usb1: root hub lost power or was reset
[ 278.423352] [drm] nouveau 0000:04:00.0: POSTing device...
[ 278.423355] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
[ 278.424259] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 278.424277] usb usb2: root hub lost power or was reset
[ 278.424307] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 278.424325] usb usb3: root hub lost power or was reset
[ 278.424341] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 278.424359] usb usb4: root hub lost power or was reset
[ 278.424375] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 278.424400] pci 0000:00:1e.0: setting latency timer to 64
[ 278.424418] sata_sil 0000:01:01.0: Applying R_ERR on DMA activate FIS errata fix
[ 278.424460] pcieport 0000:00:1c.3: wake-up capability disabled by ACPI
[ 278.426375] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 278.426394] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 278.427680] parport_pc 00:06: activated
[ 278.427689] i8042 kbd 00:0b: wake-up capability disabled by ACPI
[ 278.428137] ns558 00:0d: activated
[ 278.428590] mpu401 00:0e: activated
[ 278.429093] serial 00:0f: activated
[ 278.448693] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
[ 278.505179] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
[ 278.505206] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xE60D
[ 278.506943] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE849
[ 278.506945] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE8AE
[ 278.526834] [drm] nouveau 0000:04:00.0: Restoring GPU objects...
[ 278.623817] [drm] nouveau 0000:04:00.0: Reinitialising engines...
[ 278.624196] [drm] nouveau 0000:04:00.0: Restoring mode...
[ 278.633274] r8169 0000:02:00.0: eth0: link down
[ 278.633571] br0: port 1(eth0) entered disabled state
[ 278.708695] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[ 278.708698] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 278.724536] ata1.00: configured for UDMA/66
[ 278.744041] ata6: SATA link down (SStatus 0 SControl 310)
[ 278.752072] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 278.768320] ata5.00: configured for UDMA/100
[ 278.768343] sd 4:0:0:0: [sdc] Starting disk
[ 278.904209] usb 1-1: reset low-speed USB device number 3 using uhci_hcd
[ 279.304244] usb 4-1: reset full-speed USB device number 3 using uhci_hcd
[ 279.556088] usb 2-1: reset full-speed USB device number 5 using uhci_hcd
[ 279.952116] usb 2-2: reset low-speed USB device number 6 using uhci_hcd
[ 280.093226] r8169 0000:02:00.0: eth0: link up
[ 280.094186] br0: port 1(eth0) entered forwarding state
[ 280.094192] br0: port 1(eth0) entered forwarding state
[ 280.501960] usb 2-1.3: reset low-speed USB device number 7 using uhci_hcd
[ 283.464030] ata3: link is slow to respond, please be patient (ready=0)
[ 283.464243] ata4: link is slow to respond, please be patient (ready=0)
[ 284.476275] ata4.00: configured for UDMA/133
[ 284.476300] sd 3:0:0:0: [sdb] Starting disk
[ 284.532275] ata3.00: configured for UDMA/133
[ 284.532300] sd 2:0:0:0: [sda] Starting disk
[ 284.539841] input input9: event field not found
[ 284.539854] input input9: event field not found
[ 284.539856] input input9: event field not found
[ 284.539857] input input9: event field not found
[ 284.539859] input input9: event field not found
[ 284.539860] input input9: event field not found
[ 284.539862] input input9: event field not found
[ 284.539873] input input10: event field not found
[ 284.539875] input input10: event field not found
[ 284.539876] input input10: event field not found
[ 284.539878] input input10: event field not found
[ 284.539879] input input10: event field not found
[ 284.539881] input input10: event field not found
[ 284.539882] input input10: event field not found
[ 284.539964] PM: resume of devices complete after 6116.763 msecs
[ 284.543407] usbled 1-1:1.0: USB LED device now attached
[ 284.543598] PM: Finishing wakeup.
[ 284.543600] Restarting tasks ... done.
[ 295.136010] br0: port 1(eth0) entered forwarding state
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5-trunk-686-pae (Debian 3.5-1~experimental.1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Thu Aug 2 17:56:18 UTC 2012
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7f8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7f90000-0x00000000b7f9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7f9e000-0x00000000b7fdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7fe0000-0x00000000b7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5LD2-SE, BIOS 1301 08/16/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xb7f90 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0B0000000 mask FF8000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x019fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x379fdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x377fffff] page 2M
[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x379fdfff @ [mem 0x019f9000-0x019fffff]
[ 0.000000] RAMDISK: [mem 0x376b2000-0x37b50fff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37213000-0x376b1254]
[ 0.000000] Move RAMDISK from [mem 0x376b2000-0x37b50254] to [mem 0x37213000-0x376b1254]
[ 0.000000] ACPI: RSDP 000face0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT b7f90100 0004C (v01 A_M_I_ OEMXSDT 08000716 MSFT 00000097)
[ 0.000000] ACPI: FACP b7f90290 000F4 (v03 A_M_I_ OEMFACP 08000716 MSFT 00000097)
[ 0.000000] ACPI: DSDT b7f90410 085E8 (v01 A0402 A0402000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS b7f9e000 00040
[ 0.000000] ACPI: APIC b7f90390 00080 (v01 A_M_I_ OEMAPIC 08000716 MSFT 00000097)
[ 0.000000] ACPI: OEMB b7f9e040 00066 (v01 A_M_I_ AMI_OEM 08000716 MSFT 00000097)
[ 0.000000] ACPI: HPET b7f98a00 00038 (v01 A_M_I_ OEMHPET 08000716 MSFT 00000097)
[ 0.000000] ACPI: MCFG b7f98a40 0003C (v01 A_M_I_ OEMMCFG 08000716 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2053MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x379fdfff]
[ 0.000000] HighMem [mem 0x379fe000-0xb7f8ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb7f8ffff]
[ 0.000000] On node 0 totalpages: 753439
[ 0.000000] free_area_init_node: node 0, pgdat c142fac0, node_mem_map f5b13200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4108 pages used for memmap
[ 0.000000] HighMem zone: 521606 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] e820: [mem 0xb8000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b3000 s32960 r0 d24384 u57344
[ 0.000000] pcpu-alloc: s32960 r0 d24384 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 747551
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5-trunk-686-pae root=/dev/mapper/storage1-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:000b7f90)
[ 0.000000] Memory: 2979028k/3014208k available (2905k kernel code, 34728k reserved, 1411k data, 420k init, 2102856k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1438000 - 0xc14a1000 ( 420 kB)
[ 0.000000] .data : 0xc12d67a0 - 0xc1437640 (1411 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12d67a0 (2905 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2404.035 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4808.07 BogoMIPS (lpj=9616140)
[ 0.004005] pid_max: default: 32768 minimum: 301
[ 0.008027] Security Framework initialized
[ 0.008032] AppArmor: AppArmor disabled by boot time parameter
[ 0.008044] Mount-cache hash table entries: 512
[ 0.008251] Initializing cgroup subsys cpuacct
[ 0.008253] Initializing cgroup subsys memory
[ 0.008260] Initializing cgroup subsys devices
[ 0.008262] Initializing cgroup subsys freezer
[ 0.008263] Initializing cgroup subsys net_cls
[ 0.008265] Initializing cgroup subsys blkio
[ 0.008267] Initializing cgroup subsys perf_event
[ 0.008293] CPU: Physical Processor ID: 0
[ 0.008294] CPU: Processor Core ID: 0
[ 0.008296] mce: CPU supports 6 MCE banks
[ 0.008303] CPU0: Thermal monitoring enabled (TM2)
[ 0.008306] using mwait in idle threads.
[ 0.008660] ACPI: Core revision 20120320
[ 0.012073] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016272] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.055957] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.056003] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.056003] PEBS disabled due to CPU errata.
[ 0.056003] ... version: 2
[ 0.056003] ... bit width: 40
[ 0.056003] ... generic registers: 2
[ 0.056003] ... value mask: 000000ffffffffff
[ 0.056003] ... max period: 000000007fffffff
[ 0.056003] ... fixed-purpose events: 3
[ 0.056003] ... event mask: 0000000700000003
[ 0.056003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.056003] CPU 1 irqstacks, hard=f54d6000 soft=f54d8000
[ 0.008000] Initializing CPU#1
[ 0.056003] Booting Node 0, Processors #1
[ 0.064071] Brought up 2 CPUs
[ 0.064075] Total of 2 processors activated (9616.14 BogoMIPS).
[ 0.068090] devtmpfs: initialized
[ 0.068185] PM: Registering ACPI NVS region [mem 0xb7f9e000-0xb7fdffff] (270336 bytes)
[ 0.072074] dummy:
[ 0.072137] NET: Registered protocol family 16
[ 0.072270] ACPI: bus type pci registered
[ 0.072329] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.072331] PCI: not using MMCONFIG
[ 0.072451] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.072623] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[ 0.072624] PCI: Using configuration type 1 for base access
[ 0.073124] bio: create slab <bio-0> at 0
[ 0.073124] ACPI: Added _OSI(Module Device)
[ 0.073124] ACPI: Added _OSI(Processor Device)
[ 0.073124] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.073124] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.073124] ACPI: EC: Look up EC in DSDT
[ 0.073952] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.080367] ACPI: SSDT b7f9e0b0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.080593] ACPI: Dynamic OEM Table Load:
[ 0.080596] ACPI: SSDT (null) 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.080761] ACPI: SSDT b7f9e280 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.080979] ACPI: Dynamic OEM Table Load:
[ 0.080981] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.081201] ACPI: Interpreter enabled
[ 0.081214] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.081234] ACPI: Using IOAPIC for interrupt routing
[ 0.081253] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.082522] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.082524] PCI: Using MMCONFIG for extended config space
[ 0.087432] ACPI: No dock devices found.
[ 0.087438] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.087488] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.087558] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.087561] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.087564] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.087567] pci_root PNP0A08:00: host bridge window [mem 0xb8010000-0xffffffff] (ignored)
[ 0.087569] PCI: root bus 00: using default resources
[ 0.087599] PCI host bridge to bus 0000:00
[ 0.087602] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.087605] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.087614] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[ 0.087658] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[ 0.087698] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.087741] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.087756] pci 0000:00:1b.0: reg 10: [mem 0xbbdf8000-0xbbdfbfff 64bit]
[ 0.087821] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.087843] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.087910] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.087934] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[ 0.088012] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.088036] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.088075] pci 0000:00:1d.0: reg 20: [io 0x5400-0x541f]
[ 0.088105] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.088143] pci 0000:00:1d.1: reg 20: [io 0x5800-0x581f]
[ 0.088173] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.088211] pci 0000:00:1d.2: reg 20: [io 0x6000-0x601f]
[ 0.088241] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.088279] pci 0000:00:1d.3: reg 20: [io 0x6400-0x641f]
[ 0.088317] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.088335] pci 0000:00:1d.7: reg 10: [mem 0xbbdffc00-0xbbdfffff]
[ 0.088414] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.088432] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.088493] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[ 0.088572] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0330 (mask 0003)
[ 0.088575] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.088616] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018f
[ 0.088628] pci 0000:00:1f.1: reg 10: [io 0x8000-0x8007]
[ 0.088637] pci 0000:00:1f.1: reg 14: [io 0x7800-0x7803]
[ 0.088646] pci 0000:00:1f.1: reg 18: [io 0x7400-0x7407]
[ 0.088656] pci 0000:00:1f.1: reg 1c: [io 0x7000-0x7003]
[ 0.088665] pci 0000:00:1f.1: reg 20: [io 0x6800-0x680f]
[ 0.088699] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[ 0.088712] pci 0000:00:1f.2: reg 10: [io 0x9800-0x9807]
[ 0.088720] pci 0000:00:1f.2: reg 14: [io 0x9400-0x9403]
[ 0.088728] pci 0000:00:1f.2: reg 18: [io 0x9000-0x9007]
[ 0.088736] pci 0000:00:1f.2: reg 1c: [io 0x8800-0x8803]
[ 0.088744] pci 0000:00:1f.2: reg 20: [io 0x8400-0x840f]
[ 0.088777] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.088791] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.088840] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.088908] pci 0000:04:00.0: [10de:0640] type 00 class 0x030000
[ 0.088919] pci 0000:04:00.0: reg 10: [mem 0xbf000000-0xbfffffff]
[ 0.088931] pci 0000:04:00.0: reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.088942] pci 0000:04:00.0: reg 1c: [mem 0xbc000000-0xbdffffff 64bit]
[ 0.088949] pci 0000:04:00.0: reg 24: [io 0xe800-0xe87f]
[ 0.088957] pci 0000:04:00.0: reg 30: [mem 0xbef80000-0xbeffffff pref]
[ 0.096018] pci 0000:00:01.0: PCI bridge to [bus 04-04]
[ 0.096024] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.096028] pci 0000:00:01.0: bridge window [mem 0xbc000000-0xbfffffff]
[ 0.096035] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.096081] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.096086] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.096164] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.096185] pci 0000:02:00.0: reg 10: [io 0xc800-0xc8ff]
[ 0.096221] pci 0000:02:00.0: reg 18: [mem 0xbbfff000-0xbbffffff 64bit]
[ 0.096270] pci 0000:02:00.0: reg 30: [mem 0xbbfe0000-0xbbfeffff pref]
[ 0.096348] pci 0000:02:00.0: supports D1 D2
[ 0.096351] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.096377] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.096386] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.096390] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.096394] pci 0000:00:1c.3: bridge window [mem 0xbbf00000-0xbbffffff]
[ 0.096429] pci 0000:01:01.0: [1095:3512] type 00 class 0x010400
[ 0.096446] pci 0000:01:01.0: reg 10: [io 0xb800-0xb807]
[ 0.096456] pci 0000:01:01.0: reg 14: [io 0xb400-0xb403]
[ 0.096466] pci 0000:01:01.0: reg 18: [io 0xb000-0xb007]
[ 0.096475] pci 0000:01:01.0: reg 1c: [io 0xa800-0xa803]
[ 0.096485] pci 0000:01:01.0: reg 20: [io 0xa400-0xa40f]
[ 0.096495] pci 0000:01:01.0: reg 24: [mem 0xbbeffc00-0xbbeffdff]
[ 0.096505] pci 0000:01:01.0: reg 30: [mem 0xbbe00000-0xbbe7ffff pref]
[ 0.096532] pci 0000:01:01.0: supports D1 D2
[ 0.096574] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.096578] pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff]
[ 0.096582] pci 0000:00:1e.0: bridge window [mem 0xbbe00000-0xbbefffff]
[ 0.096588] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.096590] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.096606] pci_bus 0000:00: on NUMA node 0
[ 0.096609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.096722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.096758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.096844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.096883] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.096931] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.096934] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.096935] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.099907] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.099951] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.099996] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.100043] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.100088] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.100132] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.100174] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.100218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.100279] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.100279] vgaarb: loaded
[ 0.100279] vgaarb: bridge control possible 0000:04:00.0
[ 0.100279] PCI: Using ACPI for IRQ routing
[ 0.100279] PCI: pci_cache_line_size set to 64 bytes
[ 0.100279] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.100279] e820: reserve RAM buffer [mem 0xb7f90000-0xb7ffffff]
[ 0.100279] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.100279] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.100279] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.104024] Switching to clocksource hpet
[ 0.105787] pnp: PnP ACPI init
[ 0.105798] ACPI: bus type pnp registered
[ 0.105851] pnp 00:00: [bus 00-ff]
[ 0.105854] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.105856] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.105859] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.105861] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.105864] pnp 00:00: [mem 0xb8010000-0xffffffff window]
[ 0.105905] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.105914] pnp 00:01: [mem 0xfed13000-0xfed19fff]
[ 0.105953] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.105956] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.105982] pnp 00:02: [dma 4]
[ 0.105984] pnp 00:02: [io 0x0000-0x000f]
[ 0.105986] pnp 00:02: [io 0x0081-0x0083]
[ 0.105988] pnp 00:02: [io 0x0087]
[ 0.105991] pnp 00:02: [io 0x0089-0x008b]
[ 0.105993] pnp 00:02: [io 0x008f]
[ 0.105995] pnp 00:02: [io 0x00c0-0x00df]
[ 0.106020] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.106030] pnp 00:03: [io 0x0070-0x0071]
[ 0.106038] pnp 00:03: [irq 8]
[ 0.106063] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.106072] pnp 00:04: [io 0x0061]
[ 0.106098] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.106108] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.106113] pnp 00:05: [irq 13]
[ 0.106139] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.106595] pnp 00:06: [irq 7]
[ 0.106598] pnp 00:06: [dma 3]
[ 0.106600] pnp 00:06: [io 0x0378-0x037f]
[ 0.106603] pnp 00:06: [io 0x0778-0x077f]
[ 0.106731] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.106760] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.106762] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.106765] pnp 00:07: [io 0x0290-0x0297]
[ 0.106808] system 00:07: [io 0x0290-0x0297] has been reserved
[ 0.106812] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.106915] pnp 00:08: [io 0x0010-0x001f]
[ 0.106918] pnp 00:08: [io 0x0022-0x003f]
[ 0.106920] pnp 00:08: [io 0x0044-0x005f]
[ 0.106922] pnp 00:08: [io 0x0062-0x0063]
[ 0.106924] pnp 00:08: [io 0x0065-0x006f]
[ 0.106926] pnp 00:08: [io 0x0072-0x007f]
[ 0.106928] pnp 00:08: [io 0x0080]
[ 0.106931] pnp 00:08: [io 0x0084-0x0086]
[ 0.106933] pnp 00:08: [io 0x0088]
[ 0.106936] pnp 00:08: [io 0x008c-0x008e]
[ 0.106938] pnp 00:08: [io 0x0090-0x009f]
[ 0.106940] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.106942] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.106944] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.106947] pnp 00:08: [io 0x0800-0x087f]
[ 0.106949] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.106951] pnp 00:08: [io 0x0480-0x04bf]
[ 0.106953] pnp 00:08: [io 0x0900-0x091f]
[ 0.106956] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.106958] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[ 0.106960] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.106962] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.107025] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.107028] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.107031] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.107034] system 00:08: [io 0x0900-0x091f] has been reserved
[ 0.107037] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.107040] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.107043] system 00:08: [mem 0xffb00000-0xffbfffff] could not be reserved
[ 0.107046] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.107050] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107095] pnp 00:09: [io 0x03f6]
[ 0.107136] system 00:09: [io 0x03f6] has been reserved
[ 0.107139] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107190] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.107220] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.107247] pnp 00:0b: [io 0x0060]
[ 0.107249] pnp 00:0b: [io 0x0064]
[ 0.107254] pnp 00:0b: [irq 1]
[ 0.107288] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.107347] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.107349] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.107393] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.107396] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.107400] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107608] pnp 00:0d: [io 0x0200-0x0207]
[ 0.107643] pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.107860] pnp 00:0e: [io 0x0330-0x0331]
[ 0.107865] pnp 00:0e: [irq 10]
[ 0.107905] pnp 00:0e: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.108150] pnp 00:0f: [irq 4]
[ 0.108153] pnp 00:0f: [dma 0 disabled]
[ 0.108155] pnp 00:0f: [io 0x03f8-0x03ff]
[ 0.108229] pnp 00:0f: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.108273] pnp 00:10: [mem 0xf0000000-0xf3ffffff]
[ 0.108317] system 00:10: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.108321] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.108445] pnp 00:11: [mem 0x00000000-0x0009ffff]
[ 0.108448] pnp 00:11: [mem 0x000c0000-0x000dffff]
[ 0.108452] pnp 00:11: [mem 0x000e0000-0x000fffff]
[ 0.108454] pnp 00:11: [mem 0x00100000-0xb7ffffff]
[ 0.108456] pnp 00:11: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.108506] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.108509] system 00:11: [mem 0x000c0000-0x000dffff] could not be reserved
[ 0.108513] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.108516] system 00:11: [mem 0x00100000-0xb7ffffff] could not be reserved
[ 0.108519] system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.108635] pnp: PnP ACPI: found 18 devices
[ 0.108637] ACPI: ACPI bus type pnp unregistered
[ 0.108640] PnPBIOS: Disabled by ACPI PNP
[ 0.145203] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.145207] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000
[ 0.145223] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.145226] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.145231] pci 0000:00:1c.0: BAR 14: assigned [mem 0xb8000000-0xb81fffff]
[ 0.145235] pci 0000:00:1c.0: BAR 15: assigned [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.145238] pci 0000:00:01.0: PCI bridge to [bus 04-04]
[ 0.145241] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.145245] pci 0000:00:01.0: bridge window [mem 0xbc000000-0xbfffffff]
[ 0.145248] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.145253] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.145256] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.145261] pci 0000:00:1c.0: bridge window [mem 0xb8000000-0xb81fffff]
[ 0.145265] pci 0000:00:1c.0: bridge window [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.145271] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.145274] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
[ 0.145279] pci 0000:00:1c.3: bridge window [mem 0xbbf00000-0xbbffffff]
[ 0.145286] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
[ 0.145289] pci 0000:00:1e.0: bridge window [io 0xa000-0xbfff]
[ 0.145294] pci 0000:00:1e.0: bridge window [mem 0xbbe00000-0xbbefffff]
[ 0.145323] pci 0000:00:1e.0: setting latency timer to 64
[ 0.145327] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.145330] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.145332] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.145334] pci_bus 0000:04: resource 1 [mem 0xbc000000-0xbfffffff]
[ 0.145337] pci_bus 0000:04: resource 2 [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.145339] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.145342] pci_bus 0000:03: resource 1 [mem 0xb8000000-0xb81fffff]
[ 0.145344] pci_bus 0000:03: resource 2 [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.145346] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.145349] pci_bus 0000:02: resource 1 [mem 0xbbf00000-0xbbffffff]
[ 0.145351] pci_bus 0000:01: resource 0 [io 0xa000-0xbfff]
[ 0.145353] pci_bus 0000:01: resource 1 [mem 0xbbe00000-0xbbefffff]
[ 0.145356] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.145358] pci_bus 0000:01: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.145403] NET: Registered protocol family 2
[ 0.145465] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.145612] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.145978] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.146161] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.146163] TCP: reno registered
[ 0.146165] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.146173] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.146238] NET: Registered protocol family 1
[ 0.146390] pci 0000:04:00.0: Boot video device
[ 0.146398] PCI: CLS 16 bytes, default 64
[ 0.146439] Unpacking initramfs...
[ 0.255380] Freeing initrd memory: 4732k freed
[ 0.257430] audit: initializing netlink socket (disabled)
[ 0.257453] type=2000 audit(1350042098.256:1): initialized
[ 0.272856] highmem bounce pool size: 64 pages
[ 0.272861] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.273420] VFS: Disk quotas dquot_6.5.2
[ 0.273449] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.273529] msgmni has been set to 1720
[ 0.273700] alg: No test for stdrng (krng)
[ 0.273727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.273730] io scheduler noop registered
[ 0.273731] io scheduler deadline registered
[ 0.273745] io scheduler cfq registered (default)
[ 0.273854] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.273930] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.274017] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.274087] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.274110] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.274112] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.274377] intel_idle: does not run on family 6 model 15
[ 0.274402] GHES: HEST is not enabled!
[ 0.274413] isapnp: Scanning for PnP cards...
[ 0.627302] isapnp: No Plug & Play device found
[ 0.627366] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.647703] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.668402] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.668623] Linux agpgart interface v0.103
[ 0.668916] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.668918] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.669424] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.669519] mousedev: PS/2 mouse device common for all mice
[ 0.669566] rtc_cmos 00:03: RTC can wake from S4
[ 0.669677] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.669699] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.669710] cpuidle: using governor ladder
[ 0.669711] cpuidle: using governor menu
[ 0.669729] drop_monitor: Initializing network drop monitor service
[ 0.669828] TCP: cubic registered
[ 0.669863] NET: Registered protocol family 10
[ 0.670066] mip6: Mobile IPv6
[ 0.670069] NET: Registered protocol family 17
[ 0.670079] Key type dns_resolver registered
[ 0.670113] Using IPI No-Shortcut mode
[ 0.670206] PM: Hibernation image not present or could not be loaded.
[ 0.670215] registered taskstats version 1
[ 0.670691] rtc_cmos 00:03: setting system clock to 2012-10-12 11:41:38 UTC (1350042098)
[ 0.670804] Freeing unused kernel memory: 420k freed
[ 0.670962] Write protecting the kernel text: 2908k
[ 0.670996] Write protecting the kernel read-only data: 1124k
[ 0.670997] NX-protecting the kernel data: 3236k
[ 0.695618] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.730220] udevd[53]: starting version 175
[ 0.746052] ACPI: bus type usb registered
[ 0.746083] usbcore: registered new interface driver usbfs
[ 0.746094] usbcore: registered new interface driver hub
[ 0.760896] SCSI subsystem initialized
[ 0.765868] usbcore: registered new device driver usb
[ 0.766173] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.766224] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.766228] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.766236] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.766279] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005400
[ 0.766314] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.766317] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.766319] usb usb1: Product: UHCI Host Controller
[ 0.766321] usb usb1: Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 0.766323] usb usb1: SerialNumber: 0000:00:1d.0
[ 0.767593] hub 1-0:1.0: USB hub found
[ 0.767600] hub 1-0:1.0: 2 ports detected
[ 0.767700] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.767703] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.767710] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.767744] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005800
[ 0.767776] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.767779] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.767782] usb usb2: Product: UHCI Host Controller
[ 0.767784] usb usb2: Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 0.767786] usb usb2: SerialNumber: 0000:00:1d.1
[ 0.767887] hub 2-0:1.0: USB hub found
[ 0.767892] hub 2-0:1.0: 2 ports detected
[ 0.767967] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.767971] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.767977] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.768027] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006000
[ 0.768059] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.768061] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.768064] usb usb3: Product: UHCI Host Controller
[ 0.768066] usb usb3: Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 0.768068] usb usb3: SerialNumber: 0000:00:1d.2
[ 0.768158] hub 3-0:1.0: USB hub found
[ 0.768163] hub 3-0:1.0: 2 ports detected
[ 0.768244] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.768248] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.768254] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 0.768287] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006400
[ 0.768319] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.768322] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.768324] usb usb4: Product: UHCI Host Controller
[ 0.768326] usb usb4: Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 0.768329] usb usb4: SerialNumber: 0000:00:1d.3
[ 0.768421] hub 4-0:1.0: USB hub found
[ 0.768425] hub 4-0:1.0: 2 ports detected
[ 0.771934] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.771941] ACPI: Power Button [PWRB]
[ 0.772030] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.772033] ACPI: Power Button [PWRF]
[ 0.774119] libata version 3.00 loaded.
[ 0.774460] ata_piix 0000:00:1f.1: version 2.13
[ 0.774520] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.777576] scsi0 : ata_piix
[ 0.780451] [drm] Initialized drm 1.1.0 20060810
[ 0.780960] scsi1 : ata_piix
[ 0.781649] wmi: Mapper loaded
[ 0.782180] ata1: PATA max UDMA/100 cmd 0x8000 ctl 0x7800 bmdma 0x6800 irq 22
[ 0.782183] ata2: PATA max UDMA/100 cmd 0x7400 ctl 0x7000 bmdma 0x6808 irq 22
[ 0.782257] ata_piix 0000:00:1f.2: MAP [
[ 0.782258] P0 P2 P1 P3 ]
[ 0.782301] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.782712] scsi2 : ata_piix
[ 0.782867] scsi3 : ata_piix
[ 0.782912] ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 23
[ 0.782914] ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 23
[ 0.805116] [drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x096000c1)
[ 0.807929] [drm] nouveau 0000:04:00.0: Checking PRAMIN for VBIOS
[ 0.856747] [drm] nouveau 0000:04:00.0: ... appears to be valid
[ 0.856750] [drm] nouveau 0000:04:00.0: Using VBIOS from PRAMIN
[ 0.856754] [drm] nouveau 0000:04:00.0: BIT BIOS found
[ 0.856756] [drm] nouveau 0000:04:00.0: Bios version 62.94.2a.00
[ 0.856759] [drm] nouveau 0000:04:00.0: TMDS table version 2.0
[ 0.857012] [drm] nouveau 0000:04:00.0: MXM: no VBIOS data, nothing to do
[ 0.857014] [drm] nouveau 0000:04:00.0: DCB version 4.0
[ 0.857017] [drm] nouveau 0000:04:00.0: DCB outp 00: 02000300 00000028
[ 0.857019] [drm] nouveau 0000:04:00.0: DCB outp 01: 01000302 00020030
[ 0.857021] [drm] nouveau 0000:04:00.0: DCB outp 02: 04011310 00000028
[ 0.857023] [drm] nouveau 0000:04:00.0: DCB outp 03: 02011312 00020030
[ 0.857025] [drm] nouveau 0000:04:00.0: DCB outp 04: 010223f1 00c0c083
[ 0.857026] [drm] nouveau 0000:04:00.0: DCB conn 00: 00001030
[ 0.857029] [drm] nouveau 0000:04:00.0: DCB conn 01: 00002130
[ 0.857031] [drm] nouveau 0000:04:00.0: DCB conn 02: 00000210
[ 0.857032] [drm] nouveau 0000:04:00.0: DCB conn 03: 00000211
[ 0.857034] [drm] nouveau 0000:04:00.0: DCB conn 04: 00000213
[ 0.857038] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
[ 0.882146] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
[ 0.885130] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
[ 0.885137] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xE60D
[ 0.886197] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE849
[ 0.886199] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE8AE
[ 0.906043] [drm] nouveau 0000:04:00.0: 0xE8AE: Condition still not met after 20ms, skipping following opcodes
[ 0.908038] [TTM] Zone kernel: Available graphics memory: 440662 kiB
[ 0.908040] [TTM] Zone highmem: Available graphics memory: 1492090 kiB
[ 0.908041] [TTM] Initializing pool allocator
[ 0.908046] [TTM] Initializing DMA pool allocator
[ 0.908056] [drm] nouveau 0000:04:00.0: Detected 1024MiB VRAM (DDR2)
[ 0.909717] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
[ 0.921439] [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
[ 0.921441] [drm] nouveau 0000:04:00.0: TV-1 has no encoders, removing
[ 0.922117] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.922118] [drm] No driver support for vblank timestamp query.
[ 0.927102] [drm] nouveau 0000:04:00.0: 1 available performance level(s)
[ 0.927105] [drm] nouveau 0000:04:00.0: 3: core 550MHz shader 1375MHz memory 400MHz fanspeed 100%
[ 0.927109] [drm] nouveau 0000:04:00.0: c: core 400MHz shader 800MHz memory 399MHz fanspeed 100%
[ 0.947485] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H54N, 1.00, max UDMA/66
[ 0.952010] [drm] nouveau 0000:04:00.0: MM: using CRYPT for buffer copies
[ 0.960331] ata1.00: configured for UDMA/66
[ 0.962938] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H54N 1.00 PQ: 0 ANSI: 5
[ 0.968639] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 0.968642] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.968784] ata4.00: ATA-7: SAMSUNG HE103UJ, 1AA01113, max UDMA7
[ 0.968786] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.976542] ata4.00: configured for UDMA/133
[ 0.976682] ata3.00: configured for UDMA/133
[ 0.976752] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 0.976999] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HE103UJ 1AA0 PQ: 0 ANSI: 5
[ 0.982515] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.982562] sd 2:0:0:0: [sda] Write Protect is off
[ 0.982565] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.982585] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.983909] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.983954] sd 3:0:0:0: [sdb] Write Protect is off
[ 0.983957] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.983977] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.991831] sda: sda1 sda2 sda3
[ 0.992904] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.004038] sdb: sdb1 sdb2 sdb3
[ 1.004725] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.044183] [drm] nouveau 0000:04:00.0: allocated 1680x1050 fb: 0x2c0000, bo f4f95000
[ 1.044305] fbcon: nouveaufb (fb0) is primary device
[ 1.084086] Console: switching to colour frame buffer device 210x65
[ 1.086270] fb0: nouveaufb frame buffer device
[ 1.086272] drm: registered panic notifier
[ 1.086276] [drm] Initialized nouveau 1.0.0 20120316 for 0000:04:00.0 on minor 0
[ 1.088047] usb 1-1: new low-speed USB device number 2 using uhci_hcd
[ 1.186500] usbcore: registered new interface driver usbhid
[ 1.186503] usbhid: USB HID core driver
[ 1.228332] md: md0 stopped.
[ 1.229814] md: bind<sdb2>
[ 1.230013] md: bind<sda2>
[ 1.231738] md: raid1 personality registered for level 1
[ 1.231910] bio: create slab <bio-1> at 1
[ 1.231989] md/raid1:md0: active with 2 out of 2 mirrors
[ 1.232020] md0: detected capacity change from 0 to 501612544
[ 1.250016] md0: unknown partition table
[ 1.255927] md: md1 stopped.
[ 1.256109] Refined TSC clocksource calibration: 2404.112 MHz.
[ 1.256113] Switching to clocksource tsc
[ 1.257126] md: bind<sdb3>
[ 1.257319] md: bind<sda3>
[ 1.259962] md/raid1:md1: active with 2 out of 2 mirrors
[ 1.259979] md1: detected capacity change from 0 to 959495274496
[ 1.263262] device-mapper: uevent: version 1.0.3
[ 1.263316] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.268347] usb 1-1: New USB device found, idVendor=1d34, idProduct=0004
[ 1.268351] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.268353] usb 1-1: Product: DL100B Dream Cheeky Generic Controller
[ 1.268355] usb 1-1: Manufacturer: Dream Link
[ 1.272273] md1: unknown partition table
[ 1.380120] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 1.530788] usb 2-1: New USB device found, idVendor=0451, idProduct=1446
[ 1.530793] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.533835] hub 2-1:1.0: USB hub found
[ 1.535788] hub 2-1:1.0: 4 ports detected
[ 1.652093] usb 2-2: new low-speed USB device number 3 using uhci_hcd
[ 1.829786] usb 2-2: New USB device found, idVendor=046d, idProduct=c505
[ 1.829790] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.829794] usb 2-2: Product: USB Receiver
[ 1.829797] usb 2-2: Manufacturer: Logitech
[ 1.988112] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.156060] usb 3-2: New USB device found, idVendor=058f, idProduct=6362
[ 2.156065] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.156068] usb 3-2: Product: Mass Storage Device
[ 2.156072] usb 3-2: Manufacturer: Generic
[ 2.156075] usb 3-2: SerialNumber: 058F63626376
[ 2.268053] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.449321] usb 4-1: New USB device found, idVendor=03f0, idProduct=0a01
[ 2.449326] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=12
[ 2.449330] usb 4-1: Product: hp scanjet scanner
[ 2.449333] usb 4-1: Manufacturer: Hewlett-Packard
[ 2.449336] usb 4-1: SerialNumber: CN34QS114Q
[ 2.525787] usb 2-1.3: new low-speed USB device number 4 using uhci_hcd
[ 2.665785] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c517
[ 2.665790] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.665793] usb 2-1.3: Product: USB Receiver
[ 2.665797] usb 2-1.3: Manufacturer: Logitech
[ 2.683127] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
[ 2.683177] logitech 0003:046D:C517.0003: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input0
[ 2.714833] logitech 0003:046D:C517.0004: fixing up Logitech keyboard report descriptor
[ 2.715488] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input4
[ 2.715595] logitech 0003:046D:C517.0004: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input1
[ 10.452306] kjournald starting. Commit interval 5 seconds
[ 10.452335] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 12.918367] udevd[467]: starting version 175
[ 13.994247] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 806kHz
[ 14.073638] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
[ 14.164113] ACPI: Requesting acpi_cpufreq
[ 14.281243] intel_rng: FWH not detected
[ 14.294008] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 14.361531] parport_pc 00:06: reported by Plug and Play ACPI
[ 14.361634] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 14.416764] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20120320/utaddress-251)
[ 14.416772] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.583413] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 14.583416] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 14.583462] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 14.583466] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 14.583474] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 14.583489] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 14.583499] ehci_hcd 0000:00:1d.7: debug port 1
[ 14.587383] ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
[ 14.587391] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xbbdffc00
[ 14.596028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 14.596059] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 14.596064] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.596068] usb usb5: Product: EHCI Host Controller
[ 14.596071] usb usb5: Manufacturer: Linux 3.5-trunk-686-pae ehci_hcd
[ 14.596074] usb usb5: SerialNumber: 0000:00:1d.7
[ 14.596228] hub 5-0:1.0: USB hub found
[ 14.596235] hub 5-0:1.0: 8 ports detected
[ 14.596365] ACPI Warning: 0x00000830-0x00000833 SystemIO conflicts with Region \SMIE 1 (20120320/utaddress-251)
[ 14.596371] ACPI Warning: 0x00000830-0x00000833 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMIE 2 (20120320/utaddress-251)
[ 14.596375] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.596377] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 14.596385] ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPIO 1 (20120320/utaddress-251)
[ 14.596389] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.596391] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.597995] coretemp coretemp.0: Using relative temperature scale!
[ 14.598018] coretemp coretemp.0: Using relative temperature scale!
[ 14.611583] leds_ss4200: no LED devices found
[ 14.757456] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
[ 14.761208] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 14.784105] usb 1-1: USB disconnect, device number 2
[ 14.912046] usb 2-1: USB disconnect, device number 2
[ 14.912052] usb 2-1.3: USB disconnect, device number 4
[ 15.060035] usb 2-2: USB disconnect, device number 3
[ 15.075600] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 15.075713] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 15.075916] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xf8350000, 00:1a:92:9d:e5:f5, XID 18000000 IRQ 43
[ 15.075919] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 15.188059] usb 3-2: USB disconnect, device number 2
[ 15.316070] usb 4-1: USB disconnect, device number 2
[ 15.348499] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 15.348504] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 15.348665] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 15.445778] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 15.445935] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 15.445974] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 15.448053] sata_sil 0000:01:01.0: version 2.4
[ 15.448436] scsi4 : sata_sil
[ 15.448527] scsi5 : sata_sil
[ 15.448579] ata5: SATA max UDMA/100 mmio m512@0xbbeffc00 tf 0xbbeffc80 irq 21
[ 15.448582] ata6: SATA max UDMA/100 mmio m512@0xbbeffc00 tf 0xbbeffcc0 irq 21
[ 15.625406] usbcore: registered new interface driver usbled
[ 15.632617] Btrfs loaded
[ 15.657465] usbcore: registered new interface driver uas
[ 15.768056] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.776331] ata5.00: ATA-7: SAMSUNG HD161HJ, JF100-15, max UDMA7
[ 15.776336] ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 15.780058] usb 5-6: new high-speed USB device number 5 using ehci_hcd
[ 15.784325] ata5.00: configured for UDMA/100
[ 15.784427] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
[ 15.784577] sd 4:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 15.784592] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 15.784625] sd 4:0:0:0: [sdc] Write Protect is off
[ 15.784628] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 15.784666] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 15.794952] sdc: sdc1
[ 15.795240] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 15.913939] usb 5-6: New USB device found, idVendor=058f, idProduct=6362
[ 15.913945] usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 15.913948] usb 5-6: Product: Mass Storage Device
[ 15.913952] usb 5-6: Manufacturer: Generic
[ 15.913955] usb 5-6: SerialNumber: 058F63626376
[ 16.075405] Initializing USB Mass Storage driver...
[ 16.075485] scsi6 : usb-storage 5-6:1.0
[ 16.075561] usbcore: registered new interface driver usb-storage
[ 16.075563] USB Mass Storage support registered.
[ 16.104069] ata6: SATA link down (SStatus 0 SControl 310)
[ 16.264041] usb 2-1: new full-speed USB device number 5 using uhci_hcd
[ 16.297881] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 16.414795] usb 2-1: New USB device found, idVendor=0451, idProduct=1446
[ 16.414801] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 16.417840] hub 2-1:1.0: USB hub found
[ 16.419789] hub 2-1:1.0: 4 ports detected
[ 16.664051] usb 2-2: new low-speed USB device number 6 using uhci_hcd
[ 16.673256] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 16.841789] usb 2-2: New USB device found, idVendor=046d, idProduct=c505
[ 16.841795] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 16.841799] usb 2-2: Product: USB Receiver
[ 16.841802] usb 2-2: Manufacturer: Logitech
[ 16.859165] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input7
[ 16.859273] hid-generic 0003:046D:C505.0005: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[ 16.892418] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input8
[ 16.892559] hid-generic 0003:046D:C505.0006: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[ 17.072709] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 17.073211] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 17.073712] scsi 6:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[ 17.074211] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 17.075549] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 17.076950] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 17.078071] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 17.081350] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 17.085704] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 17.090309] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 17.091196] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 17.091821] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 17.644061] usb 1-1: new low-speed USB device number 3 using uhci_hcd
[ 17.824319] usb 1-1: New USB device found, idVendor=1d34, idProduct=0004
[ 17.824325] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 17.824329] usb 1-1: Product: DL100B Dream Cheeky Generic Controller
[ 17.824333] usb 1-1: Manufacturer: Dream Link
[ 17.831315] usbled 1-1:1.0: USB LED device now attached
[ 18.068057] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[ 18.249325] usb 4-1: New USB device found, idVendor=03f0, idProduct=0a01
[ 18.249330] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=12
[ 18.249333] usb 4-1: Product: hp scanjet scanner
[ 18.249337] usb 4-1: Manufacturer: Hewlett-Packard
[ 18.249340] usb 4-1: SerialNumber: CN34QS114Q
[ 18.325795] usb 2-1.3: new low-speed USB device number 7 using uhci_hcd
[ 18.465790] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c517
[ 18.465795] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 18.465799] usb 2-1.3: Product: USB Receiver
[ 18.465803] usb 2-1.3: Manufacturer: Logitech
[ 18.483298] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input9
[ 18.483843] logitech 0003:046D:C517.0007: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input0
[ 18.514838] logitech 0003:046D:C517.0008: fixing up Logitech keyboard report descriptor
[ 18.515731] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input10
[ 18.516363] logitech 0003:046D:C517.0008: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input1
[ 18.780617] EXT3-fs (dm-1): using internal journal
[ 19.047540] fuse init (API version 7.19)
[ 19.100157] loop: module loaded
[ 19.196012] w83627ehf: Found W83627EHG chip at 0x290
[ 19.196050] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.HWRE 1 (20120320/utaddress-251)
[ 19.196058] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 29.675313] kjournald starting. Commit interval 5 seconds
[ 29.704524] EXT3-fs (dm-2): using internal journal
[ 29.704528] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 29.736160] kjournald starting. Commit interval 5 seconds
[ 29.768250] EXT3-fs (md0): using internal journal
[ 29.768253] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 30.048232] EXT4-fs (dm-3): warning: maximal mount count reached, running e2fsck is recommended
[ 30.070592] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 30.107468] kjournald starting. Commit interval 5 seconds
[ 30.107496] EXT3-fs (dm-4): warning: maximal mount count reached, running e2fsck is recommended
[ 30.107956] EXT3-fs (dm-4): using internal journal
[ 30.107960] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 30.140106] kjournald starting. Commit interval 5 seconds
[ 30.140561] EXT3-fs (dm-5): using internal journal
[ 30.140566] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 31.465100] Bridge firewalling registered
[ 31.516327] device eth0 entered promiscuous mode
[ 31.549439] r8169 0000:02:00.0: eth0: link down
[ 31.549613] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.552107] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 33.174749] r8169 0000:02:00.0: eth0: link up
[ 33.174910] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.175694] br0: port 1(eth0) entered forwarding state
[ 33.175699] br0: port 1(eth0) entered forwarding state
[ 33.175860] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 35.577612] RPC: Registered named UNIX socket transport module.
[ 35.577615] RPC: Registered udp transport module.
[ 35.577616] RPC: Registered tcp transport module.
[ 35.577618] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 35.651924] FS-Cache: Loaded
[ 35.703245] NFS: Registering the id_resolver key type
[ 35.703256] Key type id_resolver registered
[ 35.703262] FS-Cache: Netfs 'nfs' registered for caching
[ 35.710542] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 39.059043] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 39.063301] NFSD: starting 90-second grace period
[ 39.363113] vboxdrv: Found 2 processor cores.
[ 39.363252] vboxdrv: fAsync=0 offMin=0x453 offMax=0xedf
[ 39.363323] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 39.363326] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000).
[ 39.568452] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 39.571412] vboxpci: IOMMU not found (not registered)
[ 44.366779] Bluetooth: Core ver 2.16
[ 44.366797] NET: Registered protocol family 31
[ 44.366799] Bluetooth: HCI device and connection manager initialized
[ 44.366801] Bluetooth: HCI socket layer initialized
[ 44.366803] Bluetooth: L2CAP socket layer initialized
[ 44.366807] Bluetooth: SCO socket layer initialized
[ 44.541222] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 44.541225] Bluetooth: BNEP filters: protocol multicast
[ 44.545749] Bluetooth: RFCOMM TTY layer initialized
[ 44.545752] Bluetooth: RFCOMM socket layer initialized
[ 44.545754] Bluetooth: RFCOMM ver 1.11
[ 44.901060] lp0: using parport0 (interrupt-driven).
[ 44.964829] ppdev: user-space parallel port driver
[ 48.224028] br0: port 1(eth0) entered forwarding state
[ 50.561115] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 50.892355] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 51.091800] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 51.953653] Ebtables v2.0 registered
[ 52.072138] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 168.942192] PM: Syncing filesystems ... done.
[ 168.953921] PM: Preparing system for mem sleep
[ 168.986329] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 169.000088] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 169.016077] PM: Entering mem sleep
[ 169.016110] Suspending console(s) (use no_console_suspend to debug)
[ 169.016483] usbled 1-1:1.0: USB LED now disconnected
[ 169.016621] sd 4:0:0:0: [sdc] Synchronizing SCSI cache
[ 169.016725] sd 4:0:0:0: [sdc] Stopping disk
[ 169.016824] sd 3:0:0:0: [sdb] Synchronizing SCSI cache
[ 169.016902] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 169.032250] serial 00:0f: disabled
[ 169.032256] serial 00:0f: wake-up capability disabled by ACPI
[ 169.032264] i8042 kbd 00:0b: wake-up capability enabled by ACPI
[ 169.032424] parport_pc 00:06: disabled
[ 169.032710] [drm] nouveau 0000:04:00.0: Disabling display...
[ 169.047365] sd 2:0:0:0: [sda] Stopping disk
[ 169.076879] sd 3:0:0:0: [sdb] Stopping disk
[ 169.086365] [drm] nouveau 0000:04:00.0: Disabling fbcon...
[ 169.086367] [drm] nouveau 0000:04:00.0: Unpinning framebuffer(s)...
[ 169.086398] [drm] nouveau 0000:04:00.0: Evicting buffers...
[ 169.144192] ACPI handle has no context!
[ 169.177939] [drm] nouveau 0000:04:00.0: Idling channels...
[ 169.178414] [drm] nouveau 0000:04:00.0: Suspending GPU objects...
[ 170.217800] [drm] nouveau 0000:04:00.0: And we're gone!
[ 170.232120] PM: suspend of devices complete after 1215.743 msecs
[ 170.232383] PM: late suspend of devices complete after 0.261 msecs
[ 170.232543] pcieport 0000:00:1c.3: wake-up capability enabled by ACPI
[ 170.248196] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 170.264076] uhci_hcd 0000:00:1d.3: wake-up capability enabled by ACPI
[ 170.264103] uhci_hcd 0000:00:1d.2: wake-up capability enabled by ACPI
[ 170.264129] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[ 170.264154] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 170.264188] PM: noirq suspend of devices complete after 31.802 msecs
[ 170.265055] ACPI: Preparing to enter system sleep state S3
[ 170.265263] PM: Saving platform NVS memory
[ 170.265641] Disabling non-boot CPUs ...
[ 170.368034] CPU 1 is now offline
[ 170.368466] ACPI: Low-level resume complete
[ 170.368466] PM: Restoring platform NVS memory
[ 170.368466] Enabling non-boot CPUs ...
[ 170.368466] Booting Node 0 Processor 1 APIC 0x1
[ 170.266943] Initializing CPU#1
[ 170.384032] CPU1 is up
[ 170.386122] ACPI: Waking up from system sleep state S3
[ 170.386524] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 170.386548] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 170.386571] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI
[ 170.386595] uhci_hcd 0000:00:1d.3: wake-up capability disabled by ACPI
[ 170.386632] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 170.387038] PM: noirq resume of devices complete after 0.725 msecs
[ 170.387135] PM: early resume of devices complete after 0.067 msecs
[ 170.387203] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 170.387252] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 170.387260] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 170.387281] usb usb1: root hub lost power or was reset
[ 170.387289] usb usb2: root hub lost power or was reset
[ 170.387300] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 170.387308] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 170.387326] usb usb3: root hub lost power or was reset
[ 170.387336] usb usb4: root hub lost power or was reset
[ 170.387350] pci 0000:00:1e.0: setting latency timer to 64
[ 170.387344] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 170.387360] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 170.387370] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 170.387367] [drm] nouveau 0000:04:00.0: We're back, enabling device...
[ 170.387379] pcieport 0000:00:1c.3: wake-up capability disabled by ACPI
[ 170.387373] [drm] nouveau 0000:04:00.0: POSTing device...
[ 170.387375] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
[ 170.389275] sata_sil 0000:01:01.0: Applying R_ERR on DMA activate FIS errata fix
[ 170.391429] parport_pc 00:06: activated
[ 170.391437] i8042 kbd 00:0b: wake-up capability disabled by ACPI
[ 170.391860] ns558 00:0d: activated
[ 170.392367] mpu401 00:0e: activated
[ 170.392877] serial 00:0f: activated
[ 170.412719] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
[ 170.469177] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
[ 170.469203] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xE60D
[ 170.470939] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE849
[ 170.470940] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE8AE
[ 170.490828] [drm] nouveau 0000:04:00.0: Restoring GPU objects...
[ 170.587954] [drm] nouveau 0000:04:00.0: Reinitialising engines...
[ 170.588413] [drm] nouveau 0000:04:00.0: Restoring mode...
[ 170.632164] r8169 0000:02:00.0: eth0: link down
[ 170.632431] br0: port 1(eth0) entered disabled state
[ 170.672728] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[ 170.672730] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 170.688555] ata1.00: configured for UDMA/66
[ 170.708052] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 170.708124] ata6: SATA link down (SStatus 0 SControl 310)
[ 170.724320] ata5.00: configured for UDMA/100
[ 170.724355] sd 4:0:0:0: [sdc] Starting disk
[ 170.872212] usb 1-1: reset low-speed USB device number 3 using uhci_hcd
[ 171.272123] usb 2-1: reset full-speed USB device number 5 using uhci_hcd
[ 171.668281] usb 2-2: reset low-speed USB device number 6 using uhci_hcd
[ 171.993544] r8169 0000:02:00.0: eth0: link up
[ 171.994468] br0: port 1(eth0) entered forwarding state
[ 171.994473] br0: port 1(eth0) entered forwarding state
[ 172.068054] usb 4-1: reset full-speed USB device number 3 using uhci_hcd
[ 172.465288] usb 2-1.3: reset low-speed USB device number 7 using uhci_hcd
[ 172.814274] usbhid 2-1.3:1.1: reset_resume error 1
[ 175.428030] ata4: link is slow to respond, please be patient (ready=0)
[ 175.428249] ata3: link is slow to respond, please be patient (ready=0)
[ 176.440275] ata4.00: configured for UDMA/133
[ 176.440303] sd 3:0:0:0: [sdb] Starting disk
[ 176.552277] ata3.00: configured for UDMA/133
[ 176.552302] sd 2:0:0:0: [sda] Starting disk
[ 176.555215] input input7: event field not found
[ 176.555217] input input7: event field not found
[ 176.555219] input input7: event field not found
[ 176.555221] input input7: event field not found
[ 176.555222] input input7: event field not found
[ 176.555224] input input7: event field not found
[ 176.555226] input input7: event field not found
[ 176.555244] input input8: event field not found
[ 176.555246] input input8: event field not found
[ 176.555247] input input8: event field not found
[ 176.555249] input input8: event field not found
[ 176.555251] input input8: event field not found
[ 176.555253] input input8: event field not found
[ 176.555254] input input8: event field not found
[ 176.555361] PM: resume of devices complete after 6168.217 msecs
[ 176.559221] usbled 1-1:1.0: USB LED device now attached
[ 176.559487] PM: Finishing wakeup.
[ 176.559489] Restarting tasks ... done.
[ 182.148017] usbcore: deregistering interface driver usbhid
[ 182.220163] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input12
[ 182.220271] hid-generic 0003:046D:C505.0009: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[ 182.252806] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input13
[ 182.253000] hid-generic 0003:046D:C505.000A: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[ 182.294195] usbcore: registered new interface driver usbhid
[ 182.294199] usbhid: USB HID core driver
[ 182.308158] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input14
[ 182.309309] logitech 0003:046D:C517.000B: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input0
[ 182.309320] logitech 0003:046D:C517.000C: fixing up Logitech keyboard report descriptor
[ 182.309973] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input15
[ 182.311947] logitech 0003:046D:C517.000C: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input1
[ 187.040027] br0: port 1(eth0) entered forwarding state
Reply to: