Bug#690162: mouse/keyboard stop working after s2ram until hid_logitech reloaded
Am 11.10.2012 00:23, schrieb Jonathan Nieder:
retitle 690162 [3.4->3.5.5 regression] mouse/keyboard stop working after s2ram until hid_logitech reloaded
# regression
severity 690162 important
quit
Hi Michael,
Michael Schmitt wrote:
[Subject: 3.5-trunk-686-pae]
Please keep in mind that these appear as emails in a crowded inbox, so
the subject line can be a good place to put valuable context.
Oops, that was an error... it was not supposed to be such an idiotic
subject, sorry.
[...]
after resume from s2ram my mouse from a Logitech mouse/keyboard-set does not
work anymore. Reloading hid_logitech.ko fixes the mouse again. Keyboard
works always. The former version off linux-image-3.5 from experimental was
affected too, sids 3.4 did not have that issue.
Device: Bus 002 Device 007: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Mainboard: Asus P5LD2-SE
Thanks. Ideas:
- Can you reproduce this from the console, without X running?
Without even running X? Can't stop X right now but I guess I can test
that tomorrow.
- How do you suspend? "echo mem>/sys/power/state" is a good way to
make the process as simple for people interpreting what happened as
possible.
Via shutdown-menu in my DE, but with "echo mem >/sys/power/state" it is
the same. Same with pm-suspend as well.
- Please attach full "dmesg" output from booting, suspending, and
then unloading and reloading the hid_logitech module on a working
and non-working kernel.
Non-working kernel dmesg (from experimental) will be attached here, for
the working kernel I'll do it tomorrow.
- What was the first non-working kernel? If you have time to bisect
through the pre-compiled kernels at
http://snapshot.debian.org/package/linux/ to find the oldest broken
and newest non-broken one, that would be very useful.
Dunno if I got you right there, but I will try to test all
kernel-packages between the working and non-working one tomorrow which
are available at snapshot.d.o. What I can tell now:
3.4.1-1~experimental.1 (working); 3.5.2-1~experimental.1 (broken). And I
realize now the 3.4 was from experimental as well and not sid... but I
guess that doesn't matter much.
I really hope with "bisect" you did not mean git bisect, as I have no
clue about git at all.
Hope that helps,
Jonathan
Me too :)
ragards and greetings
Michael
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5-trunk-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-10) ) #1 SMP Debian 3.5.5-1~experimental.1
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7f8ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7f90000-0x00000000b7f9dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7f9e000-0x00000000b7fdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7fe0000-0x00000000b7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5LD2-SE, BIOS 1301 08/16/2007
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xb7f90 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0B0000000 mask FF8000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x019fffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x379fdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x377fffff] page 2M
[ 0.000000] [mem 0x37800000-0x379fdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x379fdfff @ [mem 0x019f9000-0x019fffff]
[ 0.000000] RAMDISK: [mem 0x376b2000-0x37b50fff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37213000-0x376b1783]
[ 0.000000] Move RAMDISK from [mem 0x376b2000-0x37b50783] to [mem 0x37213000-0x376b1783]
[ 0.000000] ACPI: RSDP 000face0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT b7f90100 0004C (v01 A_M_I_ OEMXSDT 08000716 MSFT 00000097)
[ 0.000000] ACPI: FACP b7f90290 000F4 (v03 A_M_I_ OEMFACP 08000716 MSFT 00000097)
[ 0.000000] ACPI: DSDT b7f90410 085E8 (v01 A0402 A0402000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS b7f9e000 00040
[ 0.000000] ACPI: APIC b7f90390 00080 (v01 A_M_I_ OEMAPIC 08000716 MSFT 00000097)
[ 0.000000] ACPI: OEMB b7f9e040 00066 (v01 A_M_I_ AMI_OEM 08000716 MSFT 00000097)
[ 0.000000] ACPI: HPET b7f98a00 00038 (v01 A_M_I_ OEMHPET 08000716 MSFT 00000097)
[ 0.000000] ACPI: MCFG b7f98a40 0003C (v01 A_M_I_ OEMMCFG 08000716 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2053MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x379fdfff]
[ 0.000000] HighMem [mem 0x379fe000-0xb7f8ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb7f8ffff]
[ 0.000000] On node 0 totalpages: 753439
[ 0.000000] free_area_init_node: node 0, pgdat c1431d40, node_mem_map f5b13200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4108 pages used for memmap
[ 0.000000] HighMem zone: 521606 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] e820: [mem 0xb8000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79b3000 s33024 r0 d24320 u57344
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 747551
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.5-trunk-686-pae root=/dev/mapper/storage1-root ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:000b7f90)
[ 0.000000] Memory: 2979016k/3014208k available (2909k kernel code, 34740k reserved, 1416k data, 424k init, 2102856k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc143a000 - 0xc14a4000 ( 424 kB)
[ 0.000000] .data : 0xc12d7620 - 0xc1439980 (1416 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12d7620 (2909 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f5406000 soft=f5408000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2404.248 MHz processor.
[ 0.004001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4808.49 BogoMIPS (lpj=9616992)
[ 0.004005] pid_max: default: 32768 minimum: 301
[ 0.004037] Security Framework initialized
[ 0.004041] AppArmor: AppArmor disabled by boot time parameter
[ 0.004054] Mount-cache hash table entries: 512
[ 0.008039] Initializing cgroup subsys cpuacct
[ 0.008041] Initializing cgroup subsys memory
[ 0.008047] Initializing cgroup subsys devices
[ 0.008049] Initializing cgroup subsys freezer
[ 0.008051] Initializing cgroup subsys net_cls
[ 0.008052] Initializing cgroup subsys blkio
[ 0.008054] Initializing cgroup subsys perf_event
[ 0.008080] CPU: Physical Processor ID: 0
[ 0.008081] CPU: Processor Core ID: 0
[ 0.008084] mce: CPU supports 6 MCE banks
[ 0.008091] CPU0: Thermal monitoring enabled (TM2)
[ 0.008093] using mwait in idle threads.
[ 0.008448] ACPI: Core revision 20120320
[ 0.012074] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012431] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056004] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 0.060003] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.060003] PEBS disabled due to CPU errata.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.060003] CPU 1 irqstacks, hard=f54d6000 soft=f54d8000
[ 0.008000] Initializing CPU#1
[ 0.060003] Booting Node 0, Processors #1
[ 0.068071] Brought up 2 CPUs
[ 0.068075] Total of 2 processors activated (9616.99 BogoMIPS).
[ 0.069920] devtmpfs: initialized
[ 0.069920] PM: Registering ACPI NVS region [mem 0xb7f9e000-0xb7fdffff] (270336 bytes)
[ 0.069920] dummy:
[ 0.069920] NET: Registered protocol family 16
[ 0.069920] ACPI: bus type pci registered
[ 0.069920] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.069920] PCI: not using MMCONFIG
[ 0.072081] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.072253] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
[ 0.072255] PCI: Using configuration type 1 for base access
[ 0.072750] bio: create slab <bio-0> at 0
[ 0.072750] ACPI: Added _OSI(Module Device)
[ 0.072750] ACPI: Added _OSI(Processor Device)
[ 0.072750] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072750] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.072903] ACPI: EC: Look up EC in DSDT
[ 0.073944] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.079859] ACPI: SSDT b7f9e0b0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.080098] ACPI: Dynamic OEM Table Load:
[ 0.080101] ACPI: SSDT (null) 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.080262] ACPI: SSDT b7f9e280 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.080480] ACPI: Dynamic OEM Table Load:
[ 0.080483] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.080698] ACPI: Interpreter enabled
[ 0.080711] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.080731] ACPI: Using IOAPIC for interrupt routing
[ 0.080750] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.081990] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[ 0.081992] PCI: Using MMCONFIG for extended config space
[ 0.086785] ACPI: No dock devices found.
[ 0.086792] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.086840] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.086911] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.086914] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.086917] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.086919] pci_root PNP0A08:00: >host bridge window [mem 0xb8010000-0xffffffff] (ignored)
[ 0.086921] PCI: root bus 00: using default resources
[ 0.086951] PCI host bridge to bus 0000:00
[ 0.086954] pci_bus 0000:00: >root bus resource [io 0x0000-0xffff]
[ 0.086957] pci_bus 0000:00: >root bus resource [mem 0x00000000-0xfffffffff]
[ 0.086966] pci 0000:00:00.0: >[8086:2770] type 00 class 0x060000
[ 0.087010] pci 0000:00:01.0: >[8086:2771] type 01 class 0x060400
[ 0.087051] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
[ 0.087094] pci 0000:00:1b.0: >[8086:27d8] type 00 class 0x040300
[ 0.087109] pci 0000:00:1b.0: >reg 10: [mem 0xbbdf8000-0xbbdfbfff 64bit]
[ 0.087174] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
[ 0.087196] pci 0000:00:1c.0: >[8086:27d0] type 01 class 0x060400
[ 0.087263] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
[ 0.087287] pci 0000:00:1c.3: >[8086:27d6] type 01 class 0x060400
[ 0.087352] pci 0000:00:1c.3: >PME# supported from D0 D3hot D3cold
[ 0.087376] pci 0000:00:1d.0: >[8086:27c8] type 00 class 0x0c0300
[ 0.087414] pci 0000:00:1d.0: >reg 20: [io 0x5400-0x541f]
[ 0.087444] pci 0000:00:1d.1: >[8086:27c9] type 00 class 0x0c0300
[ 0.087482] pci 0000:00:1d.1: >reg 20: [io 0x5800-0x581f]
[ 0.087512] pci 0000:00:1d.2: >[8086:27ca] type 00 class 0x0c0300
[ 0.087552] pci 0000:00:1d.2: >reg 20: [io 0x6000-0x601f]
[ 0.087582] pci 0000:00:1d.3: >[8086:27cb] type 00 class 0x0c0300
[ 0.087620] pci 0000:00:1d.3: >reg 20: [io 0x6400-0x641f]
[ 0.087658] pci 0000:00:1d.7: >[8086:27cc] type 00 class 0x0c0320
[ 0.087677] pci 0000:00:1d.7: >reg 10: [mem 0xbbdffc00-0xbbdfffff]
[ 0.087755] pci 0000:00:1d.7: >PME# supported from D0 D3hot D3cold
[ 0.087774] pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401
[ 0.087835] pci 0000:00:1f.0: >[8086:27b8] type 00 class 0x060100
[ 0.087913] pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 1 PIO at 0330 (mask 0003)
[ 0.087917] pci 0000:00:1f.0: >ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.087957] pci 0000:00:1f.1: >[8086:27df] type 00 class 0x01018f
[ 0.087970] pci 0000:00:1f.1: >reg 10: [io 0x8000-0x8007]
[ 0.087979] pci 0000:00:1f.1: >reg 14: [io 0x7800-0x7803]
[ 0.087988] pci 0000:00:1f.1: >reg 18: [io 0x7400-0x7407]
[ 0.088009] pci 0000:00:1f.1: >reg 1c: [io 0x7000-0x7003]
[ 0.088018] pci 0000:00:1f.1: >reg 20: [io 0x6800-0x680f]
[ 0.088053] pci 0000:00:1f.2: >[8086:27c0] type 00 class 0x01018f
[ 0.088066] pci 0000:00:1f.2: >reg 10: [io 0x9800-0x9807]
[ 0.088075] pci 0000:00:1f.2: >reg 14: [io 0x9400-0x9403]
[ 0.088083] pci 0000:00:1f.2: >reg 18: [io 0x9000-0x9007]
[ 0.088091] pci 0000:00:1f.2: >reg 1c: [io 0x8800-0x8803]
[ 0.088099] pci 0000:00:1f.2: >reg 20: [io 0x8400-0x840f]
[ 0.088132] pci 0000:00:1f.2: >PME# supported from D3hot
[ 0.088146] pci 0000:00:1f.3: >[8086:27da] type 00 class 0x0c0500
[ 0.088195] pci 0000:00:1f.3: >reg 20: [io 0x0400-0x041f]
[ 0.088263] pci 0000:04:00.0: >[10de:0640] type 00 class 0x030000
[ 0.088274] pci 0000:04:00.0: >reg 10: [mem 0xbf000000-0xbfffffff]
[ 0.088285] pci 0000:04:00.0: >reg 14: [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.088297] pci 0000:04:00.0: >reg 1c: [mem 0xbc000000-0xbdffffff 64bit]
[ 0.088304] pci 0000:04:00.0: >reg 24: [io 0xe800-0xe87f]
[ 0.088312] pci 0000:04:00.0: >reg 30: [mem 0xbef80000-0xbeffffff pref]
[ 0.096018] pci 0000:00:01.0: >PCI bridge to [bus 04-04]
[ 0.096024] pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
[ 0.096029] pci 0000:00:01.0: > bridge window [mem 0xbc000000-0xbfffffff]
[ 0.096035] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.096081] pci 0000:00:1c.0: >PCI bridge to [bus 03-03]
[ 0.096087] pci 0000:00:1c.0: > bridge window [io 0xd000-0xdfff]
[ 0.096164] pci 0000:02:00.0: >[10ec:8168] type 00 class 0x020000
[ 0.096186] pci 0000:02:00.0: >reg 10: [io 0xc800-0xc8ff]
[ 0.096221] pci 0000:02:00.0: >reg 18: [mem 0xbbfff000-0xbbffffff 64bit]
[ 0.096270] pci 0000:02:00.0: >reg 30: [mem 0xbbfe0000-0xbbfeffff pref]
[ 0.096350] pci 0000:02:00.0: >supports D1 D2
[ 0.096352] pci 0000:02:00.0: >PME# supported from D1 D2 D3hot D3cold
[ 0.096378] pci 0000:02:00.0: >disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.096388] pci 0000:00:1c.3: >PCI bridge to [bus 02-02]
[ 0.096392] pci 0000:00:1c.3: > bridge window [io 0xc000-0xcfff]
[ 0.096396] pci 0000:00:1c.3: > bridge window [mem 0xbbf00000-0xbbffffff]
[ 0.096431] pci 0000:01:01.0: >[1095:3512] type 00 class 0x010400
[ 0.096448] pci 0000:01:01.0: >reg 10: [io 0xb800-0xb807]
[ 0.096458] pci 0000:01:01.0: >reg 14: [io 0xb400-0xb403]
[ 0.096467] pci 0000:01:01.0: >reg 18: [io 0xb000-0xb007]
[ 0.096477] pci 0000:01:01.0: >reg 1c: [io 0xa800-0xa803]
[ 0.096487] pci 0000:01:01.0: >reg 20: [io 0xa400-0xa40f]
[ 0.096497] pci 0000:01:01.0: >reg 24: [mem 0xbbeffc00-0xbbeffdff]
[ 0.096507] pci 0000:01:01.0: >reg 30: [mem 0xbbe00000-0xbbe7ffff pref]
[ 0.096534] pci 0000:01:01.0: >supports D1 D2
[ 0.096576] pci 0000:00:1e.0: >PCI bridge to [bus 01-01] (subtractive decode)
[ 0.096580] pci 0000:00:1e.0: > bridge window [io 0xa000-0xbfff]
[ 0.096584] pci 0000:00:1e.0: > bridge window [mem 0xbbe00000-0xbbefffff]
[ 0.096590] pci 0000:00:1e.0: > bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.096593] pci 0000:00:1e.0: > bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.096608] pci_bus 0000:00: >on NUMA node 0
[ 0.096611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.096722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.096758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.096843] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.096882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.096929] pci0000:00: >Requesting ACPI _OSC control (0x1d)
[ 0.096932] pci0000:00: >ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.096934] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.099751] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.099796] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.099841] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.099883] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.099927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.099970] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.100015] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.100058] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.100119] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.100119] vgaarb: loaded
[ 0.100119] vgaarb: bridge control possible 0000:04:00.0
[ 0.100119] PCI: Using ACPI for IRQ routing
[ 0.100119] PCI: pci_cache_line_size set to 64 bytes
[ 0.100134] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.100136] e820: reserve RAM buffer [mem 0xb7f90000-0xb7ffffff]
[ 0.100255] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.100260] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.100264] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.104025] Switching to clocksource hpet
[ 0.105842] pnp: PnP ACPI init
[ 0.105853] ACPI: bus type pnp registered
[ 0.105907] pnp 00:00: >[bus 00-ff]
[ 0.105909] pnp 00:00: >[io 0x0cf8-0x0cff]
[ 0.105912] pnp 00:00: >[io 0x0000-0x0cf7 window]
[ 0.105914] pnp 00:00: >[io 0x0d00-0xffff window]
[ 0.105917] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[ 0.105919] pnp 00:00: >[mem 0xb8010000-0xffffffff window]
[ 0.105960] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.105969] pnp 00:01: >[mem 0xfed13000-0xfed19fff]
[ 0.106007] system 00:01: >[mem 0xfed13000-0xfed19fff] has been reserved
[ 0.106011] system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.106035] pnp 00:02: >[dma 4]
[ 0.106037] pnp 00:02: >[io 0x0000-0x000f]
[ 0.106040] pnp 00:02: >[io 0x0081-0x0083]
[ 0.106042] pnp 00:02: >[io 0x0087]
[ 0.106044] pnp 00:02: >[io 0x0089-0x008b]
[ 0.106046] pnp 00:02: >[io 0x008f]
[ 0.106048] pnp 00:02: >[io 0x00c0-0x00df]
[ 0.106073] pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.106083] pnp 00:03: >[io 0x0070-0x0071]
[ 0.106091] pnp 00:03: >[irq 8]
[ 0.106118] pnp 00:03: >Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.106126] pnp 00:04: >[io 0x0061]
[ 0.106152] pnp 00:04: >Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.106161] pnp 00:05: >[io 0x00f0-0x00ff]
[ 0.106166] pnp 00:05: >[irq 13]
[ 0.106192] pnp 00:05: >Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.106643] pnp 00:06: >[irq 7]
[ 0.106645] pnp 00:06: >[dma 3]
[ 0.106648] pnp 00:06: >[io 0x0378-0x037f]
[ 0.106650] pnp 00:06: >[io 0x0778-0x077f]
[ 0.106775] pnp 00:06: >Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.106803] pnp 00:07: >[io 0x0000-0xffffffffffffffff disabled]
[ 0.106806] pnp 00:07: >[io 0x0000-0xffffffffffffffff disabled]
[ 0.106809] pnp 00:07: >[io 0x0290-0x0297]
[ 0.106852] system 00:07: >[io 0x0290-0x0297] has been reserved
[ 0.106855] system 00:07: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.106957] pnp 00:08: >[io 0x0010-0x001f]
[ 0.106960] pnp 00:08: >[io 0x0022-0x003f]
[ 0.106962] pnp 00:08: >[io 0x0044-0x005f]
[ 0.106964] pnp 00:08: >[io 0x0062-0x0063]
[ 0.106966] pnp 00:08: >[io 0x0065-0x006f]
[ 0.106968] pnp 00:08: >[io 0x0072-0x007f]
[ 0.106970] pnp 00:08: >[io 0x0080]
[ 0.106972] pnp 00:08: >[io 0x0084-0x0086]
[ 0.106974] pnp 00:08: >[io 0x0088]
[ 0.106977] pnp 00:08: >[io 0x008c-0x008e]
[ 0.106980] pnp 00:08: >[io 0x0090-0x009f]
[ 0.106982] pnp 00:08: >[io 0x00a2-0x00bf]
[ 0.106984] pnp 00:08: >[io 0x00e0-0x00ef]
[ 0.106986] pnp 00:08: >[io 0x04d0-0x04d1]
[ 0.106988] pnp 00:08: >[io 0x0800-0x087f]
[ 0.106990] pnp 00:08: >[io 0x0000-0xffffffffffffffff disabled]
[ 0.106992] pnp 00:08: >[io 0x0480-0x04bf]
[ 0.106994] pnp 00:08: >[io 0x0900-0x091f]
[ 0.106997] pnp 00:08: >[mem 0xfed1c000-0xfed1ffff]
[ 0.106999] pnp 00:08: >[mem 0xfed20000-0xfed8ffff]
[ 0.107001] pnp 00:08: >[mem 0xffb00000-0xffbfffff]
[ 0.107003] pnp 00:08: >[mem 0xfff00000-0xffffffff]
[ 0.107065] system 00:08: >[io 0x04d0-0x04d1] has been reserved
[ 0.107068] system 00:08: >[io 0x0800-0x087f] has been reserved
[ 0.107071] system 00:08: >[io 0x0480-0x04bf] has been reserved
[ 0.107074] system 00:08: >[io 0x0900-0x091f] has been reserved
[ 0.107077] system 00:08: >[mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.107080] system 00:08: >[mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.107083] system 00:08: >[mem 0xffb00000-0xffbfffff] could not be reserved
[ 0.107086] system 00:08: >[mem 0xfff00000-0xffffffff] has been reserved
[ 0.107089] system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107134] pnp 00:09: >[io 0x03f6]
[ 0.107176] system 00:09: >[io 0x03f6] has been reserved
[ 0.107179] system 00:09: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107229] pnp 00:0a: >[mem 0xfed00000-0xfed003ff]
[ 0.107259] pnp 00:0a: >Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.107285] pnp 00:0b: >[io 0x0060]
[ 0.107287] pnp 00:0b: >[io 0x0064]
[ 0.107292] pnp 00:0b: >[irq 1]
[ 0.107326] pnp 00:0b: >Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.107383] pnp 00:0c: >[mem 0xfec00000-0xfec00fff]
[ 0.107385] pnp 00:0c: >[mem 0xfee00000-0xfee00fff]
[ 0.107429] system 00:0c: >[mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.107432] system 00:0c: >[mem 0xfee00000-0xfee00fff] has been reserved
[ 0.107436] system 00:0c: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.107640] pnp 00:0d: >[io 0x0200-0x0207]
[ 0.107675] pnp 00:0d: >Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.107886] pnp 00:0e: >[io 0x0330-0x0331]
[ 0.107891] pnp 00:0e: >[irq 10]
[ 0.107930] pnp 00:0e: >Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.108173] pnp 00:0f: >[irq 4]
[ 0.108176] pnp 00:0f: >[dma 0 disabled]
[ 0.108178] pnp 00:0f: >[io 0x03f8-0x03ff]
[ 0.108251] pnp 00:0f: >Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.108295] pnp 00:10: >[mem 0xf0000000-0xf3ffffff]
[ 0.108339] system 00:10: >[mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.108342] system 00:10: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.108464] pnp 00:11: >[mem 0x00000000-0x0009ffff]
[ 0.108466] pnp 00:11: >[mem 0x000c0000-0x000dffff]
[ 0.108470] pnp 00:11: >[mem 0x000e0000-0x000fffff]
[ 0.108472] pnp 00:11: >[mem 0x00100000-0xb7ffffff]
[ 0.108474] pnp 00:11: >[mem 0x00000000-0xffffffffffffffff disabled]
[ 0.108524] system 00:11: >[mem 0x00000000-0x0009ffff] could not be reserved
[ 0.108527] system 00:11: >[mem 0x000c0000-0x000dffff] could not be reserved
[ 0.108530] system 00:11: >[mem 0x000e0000-0x000fffff] could not be reserved
[ 0.108533] system 00:11: >[mem 0x00100000-0xb7ffffff] could not be reserved
[ 0.108536] system 00:11: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.108650] pnp: PnP ACPI: found 18 devices
[ 0.108652] ACPI: ACPI bus type pnp unregistered
[ 0.108654] PnPBIOS: Disabled by ACPI PNP
[ 0.145208] pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.145211] pci 0000:00:1c.0: >bridge window [mem 0x00100000-0x000fffff] to [bus 03-03] add_size 200000
[ 0.145228] pci 0000:00:1c.0: >res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.145231] pci 0000:00:1c.0: >res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.145236] pci 0000:00:1c.0: >BAR 14: assigned [mem 0xb8000000-0xb81fffff]
[ 0.145239] pci 0000:00:1c.0: >BAR 15: assigned [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.145243] pci 0000:00:01.0: >PCI bridge to [bus 04-04]
[ 0.145246] pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
[ 0.145250] pci 0000:00:01.0: > bridge window [mem 0xbc000000-0xbfffffff]
[ 0.145253] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.145258] pci 0000:00:1c.0: >PCI bridge to [bus 03-03]
[ 0.145261] pci 0000:00:1c.0: > bridge window [io 0xd000-0xdfff]
[ 0.145266] pci 0000:00:1c.0: > bridge window [mem 0xb8000000-0xb81fffff]
[ 0.145270] pci 0000:00:1c.0: > bridge window [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.145276] pci 0000:00:1c.3: >PCI bridge to [bus 02-02]
[ 0.145279] pci 0000:00:1c.3: > bridge window [io 0xc000-0xcfff]
[ 0.145284] pci 0000:00:1c.3: > bridge window [mem 0xbbf00000-0xbbffffff]
[ 0.145291] pci 0000:00:1e.0: >PCI bridge to [bus 01-01]
[ 0.145295] pci 0000:00:1e.0: > bridge window [io 0xa000-0xbfff]
[ 0.145299] pci 0000:00:1e.0: > bridge window [mem 0xbbe00000-0xbbefffff]
[ 0.145328] pci 0000:00:1e.0: >setting latency timer to 64
[ 0.145332] pci_bus 0000:00: >resource 4 [io 0x0000-0xffff]
[ 0.145335] pci_bus 0000:00: >resource 5 [mem 0x00000000-0xfffffffff]
[ 0.145337] pci_bus 0000:04: >resource 0 [io 0xe000-0xefff]
[ 0.145340] pci_bus 0000:04: >resource 1 [mem 0xbc000000-0xbfffffff]
[ 0.145342] pci_bus 0000:04: >resource 2 [mem 0xc0000000-0xefffffff 64bit pref]
[ 0.145345] pci_bus 0000:03: >resource 0 [io 0xd000-0xdfff]
[ 0.145347] pci_bus 0000:03: >resource 1 [mem 0xb8000000-0xb81fffff]
[ 0.145349] pci_bus 0000:03: >resource 2 [mem 0xb8200000-0xb83fffff 64bit pref]
[ 0.145352] pci_bus 0000:02: >resource 0 [io 0xc000-0xcfff]
[ 0.145354] pci_bus 0000:02: >resource 1 [mem 0xbbf00000-0xbbffffff]
[ 0.145357] pci_bus 0000:01: >resource 0 [io 0xa000-0xbfff]
[ 0.145359] pci_bus 0000:01: >resource 1 [mem 0xbbe00000-0xbbefffff]
[ 0.145361] pci_bus 0000:01: >resource 4 [io 0x0000-0xffff]
[ 0.145363] pci_bus 0000:01: >resource 5 [mem 0x00000000-0xfffffffff]
[ 0.145409] NET: Registered protocol family 2
[ 0.145472] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.145618] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.145987] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.146171] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.146173] TCP: reno registered
[ 0.146175] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.146183] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.146247] NET: Registered protocol family 1
[ 0.146398] pci 0000:04:00.0: >Boot video device
[ 0.146407] PCI: CLS 16 bytes, default 64
[ 0.146445] Unpacking initramfs...
[ 0.254268] Freeing initrd memory: 4732k freed
[ 0.256308] audit: initializing netlink socket (disabled)
[ 0.256333] type=2000 audit(1349889303.256:1): initialized
[ 0.268043] highmem bounce pool size: 64 pages
[ 0.268048] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.268601] VFS: Disk quotas dquot_6.5.2
[ 0.268628] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.268702] msgmni has been set to 1720
[ 0.268873] alg: No test for stdrng (krng)
[ 0.268897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.268900] io scheduler noop registered
[ 0.268901] io scheduler deadline registered
[ 0.268915] io scheduler cfq registered (default)
[ 0.269024] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[ 0.269102] pcieport 0000:00:1c.0: >irq 41 for MSI/MSI-X
[ 0.269188] pcieport 0000:00:1c.3: >irq 42 for MSI/MSI-X
[ 0.269258] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.269278] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.269280] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.269538] intel_idle: does not run on family 6 model 15
[ 0.269563] GHES: HEST is not enabled!
[ 0.269574] isapnp: Scanning for PnP cards...
[ 0.622508] isapnp: No Plug & Play device found
[ 0.622573] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.642909] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.663605] 00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.663823] Linux agpgart interface v0.103
[ 0.664123] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.664125] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.664634] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.664729] mousedev: PS/2 mouse device common for all mice
[ 0.664779] rtc_cmos 00:03: >RTC can wake from S4
[ 0.664888] rtc_cmos 00:03: >rtc core: registered rtc_cmos as rtc0
[ 0.664911] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.664922] cpuidle: using governor ladder
[ 0.664924] cpuidle: using governor menu
[ 0.664941] drop_monitor: Initializing network drop monitor service
[ 0.665039] TCP: cubic registered
[ 0.665075] NET: Registered protocol family 10
[ 0.665276] mip6: Mobile IPv6
[ 0.665278] NET: Registered protocol family 17
[ 0.665288] Key type dns_resolver registered
[ 0.665320] Using IPI No-Shortcut mode
[ 0.665416] PM: Hibernation image not present or could not be loaded.
[ 0.665426] registered taskstats version 1
[ 0.665887] rtc_cmos 00:03: >setting system clock to 2012-10-10 17:15:04 UTC (1349889304)
[ 0.666008] Freeing unused kernel memory: 424k freed
[ 0.666159] Write protecting the kernel text: 2912k
[ 0.666192] Write protecting the kernel read-only data: 1128k
[ 0.666194] NX-protecting the kernel data: 3232k
[ 0.692039] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.725450] udevd[53]: starting version 175
[ 0.739580] ACPI: bus type usb registered
[ 0.739612] usbcore: registered new interface driver usbfs
[ 0.739624] usbcore: registered new interface driver hub
[ 0.754686] usbcore: registered new device driver usb
[ 0.754989] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.755043] uhci_hcd 0000:00:1d.0: >setting latency timer to 64
[ 0.755047] uhci_hcd 0000:00:1d.0: >UHCI Host Controller
[ 0.755054] uhci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 1
[ 0.755091] uhci_hcd 0000:00:1d.0: >irq 20, io base 0x00005400
[ 0.755127] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.755130] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.755133] usb usb1: >Product: UHCI Host Controller
[ 0.755135] usb usb1: >Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 0.755137] usb usb1: >SerialNumber: 0000:00:1d.0
[ 0.756390] hub 1-0:1.0: >USB hub found
[ 0.756395] hub 1-0:1.0: >2 ports detected
[ 0.756488] uhci_hcd 0000:00:1d.1: >setting latency timer to 64
[ 0.756492] uhci_hcd 0000:00:1d.1: >UHCI Host Controller
[ 0.756500] uhci_hcd 0000:00:1d.1: >new USB bus registered, assigned bus number 2
[ 0.756535] uhci_hcd 0000:00:1d.1: >irq 17, io base 0x00005800
[ 0.756568] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.756571] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.756574] usb usb2: >Product: UHCI Host Controller
[ 0.756576] usb usb2: >Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 0.756578] usb usb2: >SerialNumber: 0000:00:1d.1
[ 0.757742] SCSI subsystem initialized
[ 0.760408] hub 2-0:1.0: >USB hub found
[ 0.760414] hub 2-0:1.0: >2 ports detected
[ 0.760507] uhci_hcd 0000:00:1d.2: >setting latency timer to 64
[ 0.760510] uhci_hcd 0000:00:1d.2: >UHCI Host Controller
[ 0.760517] uhci_hcd 0000:00:1d.2: >new USB bus registered, assigned bus number 3
[ 0.760552] uhci_hcd 0000:00:1d.2: >irq 18, io base 0x00006000
[ 0.760581] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.760584] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.760587] usb usb3: >Product: UHCI Host Controller
[ 0.760589] usb usb3: >Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 0.760591] usb usb3: >SerialNumber: 0000:00:1d.2
[ 0.763314] hub 3-0:1.0: >USB hub found
[ 0.763320] hub 3-0:1.0: >2 ports detected
[ 0.763415] uhci_hcd 0000:00:1d.3: >setting latency timer to 64
[ 0.763418] uhci_hcd 0000:00:1d.3: >UHCI Host Controller
[ 0.763425] uhci_hcd 0000:00:1d.3: >new USB bus registered, assigned bus number 4
[ 0.763460] uhci_hcd 0000:00:1d.3: >irq 19, io base 0x00006400
[ 0.763489] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0001
[ 0.763495] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.763499] usb usb4: >Product: UHCI Host Controller
[ 0.763502] usb usb4: >Manufacturer: Linux 3.5-trunk-686-pae uhci_hcd
[ 0.763506] usb usb4: >SerialNumber: 0000:00:1d.3
[ 0.763616] hub 4-0:1.0: >USB hub found
[ 0.763621] hub 4-0:1.0: >2 ports detected
[ 0.770630] [drm] Initialized drm 1.1.0 20060810
[ 0.770637] libata version 3.00 loaded.
[ 0.771011] ata_piix 0000:00:1f.1: >version 2.13
[ 0.771082] ata_piix 0000:00:1f.1: >setting latency timer to 64
[ 0.772513] wmi: Mapper loaded
[ 0.772699] scsi0 : ata_piix
[ 0.773201] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.773207] ACPI: Power Button [PWRB]
[ 0.773270] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.773273] ACPI: Power Button [PWRF]
[ 0.778769] [drm] nouveau 0000:04:00.0: Detected an NV50 generation card (0x096000c1)
[ 0.782762] [drm] nouveau 0000:04:00.0: Checking PRAMIN for VBIOS
[ 0.785429] scsi1 : ata_piix
[ 0.786817] ata1: PATA max UDMA/100 cmd 0x8000 ctl 0x7800 bmdma 0x6800 irq 22
[ 0.786820] ata2: PATA max UDMA/100 cmd 0x7400 ctl 0x7000 bmdma 0x6808 irq 22
[ 0.786882] ata_piix 0000:00:1f.2: >MAP [
[ 0.786884] P0 P2 P1 P3 ]
[ 0.786990] ata_piix 0000:00:1f.2: >setting latency timer to 64
[ 0.801527] scsi2 : ata_piix
[ 0.806839] scsi3 : ata_piix
[ 0.806890] ata3: SATA max UDMA/133 cmd 0x9800 ctl 0x9400 bmdma 0x8400 irq 23
[ 0.806893] ata4: SATA max UDMA/133 cmd 0x9000 ctl 0x8800 bmdma 0x8408 irq 23
[ 0.832034] [drm] nouveau 0000:04:00.0: ... appears to be valid
[ 0.832037] [drm] nouveau 0000:04:00.0: Using VBIOS from PRAMIN
[ 0.832041] [drm] nouveau 0000:04:00.0: BIT BIOS found
[ 0.832044] [drm] nouveau 0000:04:00.0: Bios version 62.94.2a.00
[ 0.832047] [drm] nouveau 0000:04:00.0: TMDS table version 2.0
[ 0.832481] [drm] nouveau 0000:04:00.0: MXM: no VBIOS data, nothing to do
[ 0.832483] [drm] nouveau 0000:04:00.0: DCB version 4.0
[ 0.832486] [drm] nouveau 0000:04:00.0: DCB outp 00: 02000300 00000028
[ 0.832488] [drm] nouveau 0000:04:00.0: DCB outp 01: 01000302 00020030
[ 0.832490] [drm] nouveau 0000:04:00.0: DCB outp 02: 04011310 00000028
[ 0.832492] [drm] nouveau 0000:04:00.0: DCB outp 03: 02011312 00020030
[ 0.832493] [drm] nouveau 0000:04:00.0: DCB outp 04: 010223f1 00c0c083
[ 0.832495] [drm] nouveau 0000:04:00.0: DCB conn 00: 00001030
[ 0.832497] [drm] nouveau 0000:04:00.0: DCB conn 01: 00002130
[ 0.832499] [drm] nouveau 0000:04:00.0: DCB conn 02: 00000210
[ 0.832501] [drm] nouveau 0000:04:00.0: DCB conn 03: 00000211
[ 0.832503] [drm] nouveau 0000:04:00.0: DCB conn 04: 00000213
[ 0.832508] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
[ 0.857606] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
[ 0.860592] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
[ 0.860599] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xE60D
[ 0.861660] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE849
[ 0.861662] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE8AE
[ 0.881508] [drm] nouveau 0000:04:00.0: 0xE8AE: Condition still not met after 20ms, skipping following opcodes
[ 0.883587] [TTM] Zone kernel: Available graphics memory: 440658 kiB
[ 0.883589] [TTM] Zone highmem: Available graphics memory: 1492086 kiB
[ 0.883590] [TTM] Initializing pool allocator
[ 0.883595] [TTM] Initializing DMA pool allocator
[ 0.883605] [drm] nouveau 0000:04:00.0: Detected 1024MiB VRAM (DDR2)
[ 0.885320] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
[ 0.897045] [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
[ 0.897047] [drm] nouveau 0000:04:00.0: TV-1 has no encoders, removing
[ 0.897725] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.897727] [drm] No driver support for vblank timestamp query.
[ 0.902709] [drm] nouveau 0000:04:00.0: 1 available performance level(s)
[ 0.902712] [drm] nouveau 0000:04:00.0: 3: core 550MHz shader 1375MHz memory 400MHz fanspeed 100%
[ 0.902716] [drm] nouveau 0000:04:00.0: c: core 400MHz shader 800MHz memory 399MHz fanspeed 100%
[ 0.914393] [drm] nouveau 0000:04:00.0: MM: using CRYPT for buffer copies
[ 0.999366] ata1.00: ATAPI: HL-DT-STDVD-RAM GSA-H54N, 1.00, max UDMA/66
[ 1.012264] ata1.00: configured for UDMA/66
[ 1.013453] [drm] nouveau 0000:04:00.0: allocated 1680x1050 fb: 0x2c0000, bo f4cb5400
[ 1.013510] fbcon: nouveaufb (fb0) is primary device
[ 1.015067] scsi 0:0:0:0: >CD-ROM HL-DT-ST DVD-RAM GSA-H54N 1.00 PQ: 0 ANSI: 5
[ 1.020632] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 1.020634] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.020777] ata4.00: ATA-7: SAMSUNG HE103UJ, 1AA01113, max UDMA7
[ 1.020778] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.028544] ata4.00: configured for UDMA/133
[ 1.028685] ata3.00: configured for UDMA/133
[ 1.028754] scsi 2:0:0:0: >Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.028914] scsi 3:0:0:0: >Direct-Access ATA SAMSUNG HE103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.038067] sd 2:0:0:0: >[sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.038112] sd 2:0:0:0: >[sda] Write Protect is off
[ 1.038114] sd 2:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 1.038133] sd 2:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.038621] sd 3:0:0:0: >[sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.038665] sd 3:0:0:0: >[sdb] Write Protect is off
[ 1.038667] sd 3:0:0:0: >[sdb] Mode Sense: 00 3a 00 00
[ 1.038686] sd 3:0:0:0: >[sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.046638] sda: sda1 sda2 sda3
[ 1.047334] sd 2:0:0:0: >[sda] Attached SCSI disk
[ 1.051777] sdb: sdb1 sdb2 sdb3
[ 1.052137] sd 3:0:0:0: >[sdb] Attached SCSI disk
[ 1.053407] Console: switching to colour frame buffer device 210x65
[ 1.055603] fb0: nouveaufb frame buffer device
[ 1.055605] drm: registered panic notifier
[ 1.055610] [drm] Initialized nouveau 1.0.0 20120316 for 0000:04:00.0 on minor 0
[ 1.116196] usb 1-1: >new low-speed USB device number 2 using uhci_hcd
[ 1.249975] usbcore: registered new interface driver usbhid
[ 1.249978] usbhid: USB HID core driver
[ 1.252017] Refined TSC clocksource calibration: 2404.112 MHz.
[ 1.252022] Switching to clocksource tsc
[ 1.294312] md: md0 stopped.
[ 1.295315] md: bind<sdb2>
[ 1.295502] md: bind<sda2>
[ 1.296132] usb 1-1: >New USB device found, idVendor=1d34, idProduct=0004
[ 1.296135] usb 1-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.296138] usb 1-1: >Product: DL100B Dream Cheeky Generic Controller
[ 1.296140] usb 1-1: >Manufacturer: Dream Link
[ 1.297689] md: raid1 personality registered for level 1
[ 1.297944] bio: create slab <bio-1> at 1
[ 1.298062] md/raid1:md0: active with 2 out of 2 mirrors
[ 1.298078] md0: detected capacity change from 0 to 501612544
[ 1.301861] md0: unknown partition table
[ 1.307319] md: md1 stopped.
[ 1.308722] md: bind<sdb3>
[ 1.308899] md: bind<sda3>
[ 1.310376] md/raid1:md1: active with 2 out of 2 mirrors
[ 1.310394] md1: detected capacity change from 0 to 959495274496
[ 1.312502] md1: unknown partition table
[ 1.314781] device-mapper: uevent: version 1.0.3
[ 1.315001] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.408059] usb 2-1: >new full-speed USB device number 2 using uhci_hcd
[ 1.558572] usb 2-1: >New USB device found, idVendor=0451, idProduct=1446
[ 1.558577] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.561620] hub 2-1:1.0: >USB hub found
[ 1.563572] hub 2-1:1.0: >4 ports detected
[ 1.680073] usb 2-2: >new low-speed USB device number 3 using uhci_hcd
[ 1.857569] usb 2-2: >New USB device found, idVendor=046d, idProduct=c505
[ 1.857573] usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.857577] usb 2-2: >Product: USB Receiver
[ 1.857580] usb 2-2: >Manufacturer: Logitech
[ 2.016033] usb 3-2: >new full-speed USB device number 2 using uhci_hcd
[ 2.179583] usb 3-2: >New USB device found, idVendor=058f, idProduct=6362
[ 2.179588] usb 3-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.179591] usb 3-2: >Product: Mass Storage Device
[ 2.179595] usb 3-2: >Manufacturer: Generic
[ 2.179598] usb 3-2: >SerialNumber: 058F63626376
[ 2.292071] usb 4-1: >new full-speed USB device number 2 using uhci_hcd
[ 2.473498] usb 4-1: >New USB device found, idVendor=03f0, idProduct=0a01
[ 2.473503] usb 4-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=12
[ 2.473506] usb 4-1: >Product: hp scanjet scanner
[ 2.473509] usb 4-1: >Manufacturer: Hewlett-Packard
[ 2.473513] usb 4-1: >SerialNumber: CN34QS114Q
[ 2.549570] usb 2-1.3: >new low-speed USB device number 4 using uhci_hcd
[ 2.689569] usb 2-1.3: >New USB device found, idVendor=046d, idProduct=c517
[ 2.689574] usb 2-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.689578] usb 2-1.3: >Product: USB Receiver
[ 2.689581] usb 2-1.3: >Manufacturer: Logitech
[ 2.706903] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
[ 2.706951] logitech 0003:046D:C517.0003: >input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input0
[ 2.737615] logitech 0003:046D:C517.0004: >fixing up Logitech keyboard report descriptor
[ 2.738275] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input4
[ 2.738383] logitech 0003:046D:C517.0004: >input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input1
[ 13.476568] kjournald starting. Commit interval 5 seconds
[ 13.476598] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 15.769653] udevd[470]: starting version 175
[ 16.921205] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xc6
[ 17.407525] gameport gameport0: >NS558 PnP Gameport is pnp00:0d/gameport0, io 0x200, speed 806kHz
[ 17.431822] coretemp coretemp.0: >Using relative temperature scale!
[ 17.431844] coretemp coretemp.0: >Using relative temperature scale!
[ 17.440888] parport_pc 00:06: >reported by Plug and Play ACPI
[ 17.440990] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 17.469468] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 17.469470] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 17.469508] ehci_hcd 0000:00:1d.7: >setting latency timer to 64
[ 17.469512] ehci_hcd 0000:00:1d.7: >EHCI Host Controller
[ 17.469520] ehci_hcd 0000:00:1d.7: >new USB bus registered, assigned bus number 5
[ 17.469534] ehci_hcd 0000:00:1d.7: >using broken periodic workaround
[ 17.469544] ehci_hcd 0000:00:1d.7: >debug port 1
[ 17.473437] ehci_hcd 0000:00:1d.7: >cache line size of 16 is not supported
[ 17.473443] ehci_hcd 0000:00:1d.7: >irq 20, io mem 0xbbdffc00
[ 17.484053] ehci_hcd 0000:00:1d.7: >USB 2.0 started, EHCI 1.00
[ 17.484083] usb usb5: >New USB device found, idVendor=1d6b, idProduct=0002
[ 17.484087] usb usb5: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 17.484091] usb usb5: >Product: EHCI Host Controller
[ 17.484095] usb usb5: >Manufacturer: Linux 3.5-trunk-686-pae ehci_hcd
[ 17.484098] usb usb5: >SerialNumber: 0000:00:1d.7
[ 17.484251] hub 5-0:1.0: >USB hub found
[ 17.484258] hub 5-0:1.0: >8 ports detected
[ 17.512077] usb 1-1: >USB disconnect, device number 2
[ 17.537369] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 17.563696] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 1 (20120320/utaddress-251)
[ 17.563703] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.619208] ACPI: Requesting acpi_cpufreq
[ 17.635975] intel_rng: FWH not detected
[ 17.640079] usb 2-1: >USB disconnect, device number 2
[ 17.640084] usb 2-1.3: >USB disconnect, device number 4
[ 17.792051] usb 2-2: >USB disconnect, device number 3
[ 17.804429] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 17.804546] r8169 0000:02:00.0: >irq 43 for MSI/MSI-X
[ 17.804731] r8169 0000:02:00.0: >eth0: RTL8168b/8111b at 0xf823e000, 00:1a:92:9d:e5:f5, XID 18000000 IRQ 43
[ 17.804734] r8169 0000:02:00.0: >eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 17.905944] ACPI Warning: 0x00000480-0x000004bf SystemIO conflicts with Region \_SB_.PCI0.SBRG.GPIO 1 (20120320/utaddress-251)
[ 17.905952] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 17.905954] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 17.920055] usb 3-2: >USB disconnect, device number 2
[ 17.989292] leds_ss4200: no LED devices found
[ 18.023975] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 18.023980] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 18.024154] sr 0:0:0:0: >Attached scsi CD-ROM sr0
[ 18.034261] sr 0:0:0:0: >Attached scsi generic sg0 type 5
[ 18.034301] sd 2:0:0:0: >Attached scsi generic sg1 type 0
[ 18.034339] sd 3:0:0:0: >Attached scsi generic sg2 type 0
[ 18.048145] usb 4-1: >USB disconnect, device number 2
[ 18.154720] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xc6
[ 18.160198] sata_sil 0000:01:01.0: >version 2.4
[ 18.161884] scsi4 : sata_sil
[ 18.162021] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 18.163696] scsi5 : sata_sil
[ 18.163759] ata5: SATA max UDMA/100 mmio m512@0xbbeffc00 tf 0xbbeffc80 irq 21
[ 18.163762] ata6: SATA max UDMA/100 mmio m512@0xbbeffc00 tf 0xbbeffcc0 irq 21
[ 18.345185] iTCO_vendor_support: vendor-support=0
[ 18.480875] usbcore: registered new interface driver uas
[ 18.483844] usbcore: registered new interface driver usbled
[ 18.484042] ata5: SATA link down (SStatus 0 SControl 310)
[ 18.512161] usb 5-6: >new high-speed USB device number 5 using ehci_hcd
[ 18.645867] usb 5-6: >New USB device found, idVendor=058f, idProduct=6362
[ 18.645872] usb 5-6: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 18.645876] usb 5-6: >Product: Mass Storage Device
[ 18.645879] usb 5-6: >Manufacturer: Generic
[ 18.645882] usb 5-6: >SerialNumber: 058F63626376
[ 18.804085] ata6: SATA link down (SStatus 0 SControl 310)
[ 18.810759] Initializing USB Mass Storage driver...
[ 18.812710] Btrfs loaded
[ 18.816707] scsi6 : usb-storage 5-6:1.0
[ 18.816807] usbcore: registered new interface driver usb-storage
[ 18.816809] USB Mass Storage support registered.
[ 18.825711] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 18.825744] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 18.825853] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.971643] snd_hda_intel 0000:00:1b.0: >irq 44 for MSI/MSI-X
[ 18.996037] usb 2-1: >new full-speed USB device number 5 using uhci_hcd
[ 19.146577] usb 2-1: >New USB device found, idVendor=0451, idProduct=1446
[ 19.146583] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 19.149622] hub 2-1:1.0: >USB hub found
[ 19.151572] hub 2-1:1.0: >4 ports detected
[ 19.396156] usb 2-2: >new low-speed USB device number 6 using uhci_hcd
[ 19.448089] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 19.573576] usb 2-2: >New USB device found, idVendor=046d, idProduct=c505
[ 19.573582] usb 2-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 19.573586] usb 2-2: >Product: USB Receiver
[ 19.573589] usb 2-2: >Manufacturer: Logitech
[ 19.590916] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input7
[ 19.590992] hid-generic 0003:046D:C505.0005: >input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[ 19.624212] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input8
[ 19.624976] hid-generic 0003:046D:C505.0006: >input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[ 19.816624] scsi 6:0:0:0: >Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 19.817124] scsi 6:0:0:1: >Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 19.817623] scsi 6:0:0:2: >Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[ 19.818123] scsi 6:0:0:3: >Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 19.819504] sd 6:0:0:0: >Attached scsi generic sg3 type 0
[ 19.819795] sd 6:0:0:1: >Attached scsi generic sg4 type 0
[ 19.820825] sd 6:0:0:2: >Attached scsi generic sg5 type 0
[ 19.821698] sd 6:0:0:3: >Attached scsi generic sg6 type 0
[ 19.827942] sd 6:0:0:0: >[sdc] Attached SCSI removable disk
[ 19.831244] sd 6:0:0:1: >[sdd] Attached SCSI removable disk
[ 19.831869] sd 6:0:0:2: >[sde] Attached SCSI removable disk
[ 19.832492] sd 6:0:0:3: >[sdf] Attached SCSI removable disk
[ 20.376019] usb 1-1: >new low-speed USB device number 3 using uhci_hcd
[ 20.556134] usb 1-1: >New USB device found, idVendor=1d34, idProduct=0004
[ 20.556140] usb 1-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 20.556143] usb 1-1: >Product: DL100B Dream Cheeky Generic Controller
[ 20.556147] usb 1-1: >Manufacturer: Dream Link
[ 20.563130] usbled 1-1:1.0: >USB LED device now attached
[ 20.800018] usb 4-1: >new full-speed USB device number 3 using uhci_hcd
[ 20.981501] usb 4-1: >New USB device found, idVendor=03f0, idProduct=0a01
[ 20.981506] usb 4-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=12
[ 20.981510] usb 4-1: >Product: hp scanjet scanner
[ 20.981513] usb 4-1: >Manufacturer: Hewlett-Packard
[ 20.981517] usb 4-1: >SerialNumber: CN34QS114Q
[ 21.057573] usb 2-1.3: >new low-speed USB device number 7 using uhci_hcd
[ 21.197574] usb 2-1.3: >New USB device found, idVendor=046d, idProduct=c517
[ 21.197580] usb 2-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 21.197584] usb 2-1.3: >Product: USB Receiver
[ 21.197587] usb 2-1.3: >Manufacturer: Logitech
[ 21.213979] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input9
[ 21.214100] logitech 0003:046D:C517.0007: >input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input0
[ 21.245620] logitech 0003:046D:C517.0008: >fixing up Logitech keyboard report descriptor
[ 21.246492] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input10
[ 21.246685] logitech 0003:046D:C517.0008: >input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input1
[ 21.617890] EXT3-fs (dm-1): using internal journal
[ 21.890219] fuse init (API version 7.19)
[ 21.934878] loop: module loaded
[ 21.994107] w83627ehf: Found W83627EHG chip at 0x290
[ 21.994137] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.HWRE 1 (20120320/utaddress-251)
[ 21.994143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 29.879482] kjournald starting. Commit interval 5 seconds
[ 29.908683] EXT3-fs (dm-2): using internal journal
[ 29.908688] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 29.940334] kjournald starting. Commit interval 5 seconds
[ 29.968099] EXT3-fs (md0): using internal journal
[ 29.968103] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 30.237621] EXT4-fs (dm-3): warning: maximal mount count reached, running e2fsck is recommended
[ 30.261165] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 30.303375] kjournald starting. Commit interval 5 seconds
[ 30.303403] EXT3-fs (dm-4): warning: maximal mount count reached, running e2fsck is recommended
[ 30.303865] EXT3-fs (dm-4): using internal journal
[ 30.303869] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 30.335975] kjournald starting. Commit interval 5 seconds
[ 30.336470] EXT3-fs (dm-5): using internal journal
[ 30.336474] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 31.747445] Bridge firewalling registered
[ 31.786853] device eth0 entered promiscuous mode
[ 31.823973] r8169 0000:02:00.0: >eth0: link down
[ 31.824097] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.825787] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 33.396883] r8169 0000:02:00.0: >eth0: link up
[ 33.397023] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.397809] br0: port 1(eth0) entered forwarding state
[ 33.397814] br0: port 1(eth0) entered forwarding state
[ 33.397955] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 36.063847] RPC: Registered named UNIX socket transport module.
[ 36.063850] RPC: Registered udp transport module.
[ 36.063851] RPC: Registered tcp transport module.
[ 36.063853] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 36.218095] FS-Cache: Loaded
[ 36.285215] NFS: Registering the id_resolver key type
[ 36.285235] Key type id_resolver registered
[ 36.285237] Key type id_legacy registered
[ 36.285245] FS-Cache: Netfs 'nfs' registered for caching
[ 36.357870] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 39.437352] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 39.441623] NFSD: starting 90-second grace period
[ 40.041742] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 44.693222] Bluetooth: Core ver 2.16
[ 44.693238] NET: Registered protocol family 31
[ 44.693240] Bluetooth: HCI device and connection manager initialized
[ 44.693242] Bluetooth: HCI socket layer initialized
[ 44.693244] Bluetooth: L2CAP socket layer initialized
[ 44.693248] Bluetooth: SCO socket layer initialized
[ 44.754215] Bluetooth: RFCOMM TTY layer initialized
[ 44.754223] Bluetooth: RFCOMM socket layer initialized
[ 44.754225] Bluetooth: RFCOMM ver 1.11
[ 44.817005] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 44.817009] Bluetooth: BNEP filters: protocol multicast
[ 44.929990] lp0: using parport0 (interrupt-driven).
[ 44.940913] ppdev: user-space parallel port driver
[ 48.416049] br0: port 1(eth0) entered forwarding state
[ 51.151981] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 51.328087] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 51.416987] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 52.872875] Ebtables v2.0 registered
[ 53.020377] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 57.281796] vboxdrv: disagrees about version of symbol module_layout
[ 161.538620] PM: Syncing filesystems ... done.
[ 161.550478] PM: Preparing system for mem sleep
[ 161.617240] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 161.632091] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 161.648077] PM: Entering mem sleep
[ 161.648103] Suspending console(s) (use no_console_suspend to debug)
[ 161.648474] usbled 1-1:1.0: >USB LED now disconnected
[ 161.648760] sd 3:0:0:0: >[sdb] Synchronizing SCSI cache
[ 161.648854] sd 2:0:0:0: >[sda] Synchronizing SCSI cache
[ 161.653809] sd 2:0:0:0: >[sda] Stopping disk
[ 161.662953] serial 00:0f: >disabled
[ 161.662958] serial 00:0f: >wake-up capability disabled by ACPI
[ 161.662967] i8042 kbd 00:0b: >wake-up capability enabled by ACPI
[ 161.663122] parport_pc 00:06: >disabled
[ 161.663182] [drm] nouveau 0000:04:00.0: Disabling display...
[ 161.685716] sd 3:0:0:0: >[sdb] Stopping disk
[ 161.717197] [drm] nouveau 0000:04:00.0: Disabling fbcon...
[ 161.717200] [drm] nouveau 0000:04:00.0: Unpinning framebuffer(s)...
[ 161.717231] [drm] nouveau 0000:04:00.0: Evicting buffers...
[ 161.768186] ACPI handle has no context!
[ 161.809758] [drm] nouveau 0000:04:00.0: Idling channels...
[ 161.810239] [drm] nouveau 0000:04:00.0: Suspending GPU objects...
[ 162.848432] [drm] nouveau 0000:04:00.0: And we're gone!
[ 162.864126] PM: suspend of devices complete after 1215.758 msecs
[ 162.864388] PM: late suspend of devices complete after 0.260 msecs
[ 162.864549] pcieport 0000:00:1c.3: >wake-up capability enabled by ACPI
[ 162.880196] ehci_hcd 0000:00:1d.7: >wake-up capability enabled by ACPI
[ 162.896117] uhci_hcd 0000:00:1d.3: >wake-up capability enabled by ACPI
[ 162.896143] uhci_hcd 0000:00:1d.2: >wake-up capability enabled by ACPI
[ 162.896169] uhci_hcd 0000:00:1d.1: >wake-up capability enabled by ACPI
[ 162.896195] uhci_hcd 0000:00:1d.0: >wake-up capability enabled by ACPI
[ 162.896229] PM: noirq suspend of devices complete after 31.838 msecs
[ 162.897146] ACPI: Preparing to enter system sleep state S3
[ 162.897354] PM: Saving platform NVS memory
[ 162.897734] Disabling non-boot CPUs ...
[ 163.000034] CPU 1 is now offline
[ 163.000448] ACPI: Low-level resume complete
[ 163.000448] PM: Restoring platform NVS memory
[ 163.000448] Enabling non-boot CPUs ...
[ 163.000448] Booting Node 0 Processor 1 APIC 0x1
[ 162.899030] Initializing CPU#1
[ 163.016031] CPU1 is up
[ 163.018128] ACPI: Waking up from system sleep state S3
[ 163.018528] uhci_hcd 0000:00:1d.0: >wake-up capability disabled by ACPI
[ 163.018552] uhci_hcd 0000:00:1d.1: >wake-up capability disabled by ACPI
[ 163.018576] uhci_hcd 0000:00:1d.2: >wake-up capability disabled by ACPI
[ 163.018599] uhci_hcd 0000:00:1d.3: >wake-up capability disabled by ACPI
[ 163.018636] ehci_hcd 0000:00:1d.7: >wake-up capability disabled by ACPI
[ 163.019041] PM: noirq resume of devices complete after 0.724 msecs
[ 163.019137] PM: early resume of devices complete after 0.065 msecs
[ 163.019204] snd_hda_intel 0000:00:1b.0: >irq 44 for MSI/MSI-X
[ 163.019253] uhci_hcd 0000:00:1d.0: >setting latency timer to 64
[ 163.019279] [drm] nouveau 0000:04:00.0: We're back, enabling device...
[ 163.019276] usb usb1: >root hub lost power or was reset
[ 163.019287] [drm] nouveau 0000:04:00.0: POSTing device...
[ 163.019289] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
[ 163.020225] uhci_hcd 0000:00:1d.1: >setting latency timer to 64
[ 163.020244] usb usb2: >root hub lost power or was reset
[ 163.020260] uhci_hcd 0000:00:1d.2: >setting latency timer to 64
[ 163.020279] usb usb3: >root hub lost power or was reset
[ 163.020293] uhci_hcd 0000:00:1d.3: >setting latency timer to 64
[ 163.020312] usb usb4: >root hub lost power or was reset
[ 163.020327] ehci_hcd 0000:00:1d.7: >setting latency timer to 64
[ 163.020351] pci 0000:00:1e.0: >setting latency timer to 64
[ 163.020368] sata_sil 0000:01:01.0: >Applying R_ERR on DMA activate FIS errata fix
[ 163.020419] pcieport 0000:00:1c.3: >wake-up capability disabled by ACPI
[ 163.022332] ata_piix 0000:00:1f.1: >setting latency timer to 64
[ 163.022350] ata_piix 0000:00:1f.2: >setting latency timer to 64
[ 163.023610] parport_pc 00:06: >activated
[ 163.023617] i8042 kbd 00:0b: >wake-up capability disabled by ACPI
[ 163.024063] ns558 00:0d: >activated
[ 163.024507] mpu401 00:0e: >activated
[ 163.025002] serial 00:0f: >activated
[ 163.044630] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
[ 163.101118] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
[ 163.101144] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xE60D
[ 163.102880] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE849
[ 163.102881] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE8AE
[ 163.122772] [drm] nouveau 0000:04:00.0: Restoring GPU objects...
[ 163.220076] [drm] nouveau 0000:04:00.0: Reinitialising engines...
[ 163.220522] [drm] nouveau 0000:04:00.0: Restoring mode...
[ 163.229665] r8169 0000:02:00.0: >eth0: link down
[ 163.229912] br0: port 1(eth0) entered disabled state
[ 163.304743] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[ 163.304746] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 163.320466] ata1.00: configured for UDMA/66
[ 163.340044] ata5: SATA link down (SStatus 0 SControl 310)
[ 163.340069] ata6: SATA link down (SStatus 0 SControl 310)
[ 163.500212] usb 1-1: >reset low-speed USB device number 3 using uhci_hcd
[ 163.900242] usb 2-1: >reset full-speed USB device number 5 using uhci_hcd
[ 164.300281] usb 2-2: >reset low-speed USB device number 6 using uhci_hcd
[ 164.700299] usb 4-1: >reset full-speed USB device number 3 using uhci_hcd
[ 165.101247] usb 2-1.3: >reset low-speed USB device number 7 using uhci_hcd
[ 165.450234] usbhid 2-1.3:1.1: >reset_resume error 1
[ 168.060088] ata4: link is slow to respond, please be patient (ready=0)
[ 168.072030] ata3: link is slow to respond, please be patient (ready=0)
[ 168.792292] ata4.00: configured for UDMA/133
[ 168.792316] sd 3:0:0:0: >[sdb] Starting disk
[ 168.860276] ata3.00: configured for UDMA/133
[ 168.860321] sd 2:0:0:0: >[sda] Starting disk
[ 168.867042] input input7: >event field not found
[ 168.867044] input input7: >event field not found
[ 168.867046] input input7: >event field not found
[ 168.867048] input input7: >event field not found
[ 168.867050] input input7: >event field not found
[ 168.867052] input input7: >event field not found
[ 168.867054] input input7: >event field not found
[ 168.867070] input input8: >event field not found
[ 168.867071] input input8: >event field not found
[ 168.867073] input input8: >event field not found
[ 168.867075] input input8: >event field not found
[ 168.867077] input input8: >event field not found
[ 168.867079] input input8: >event field not found
[ 168.867080] input input8: >event field not found
[ 168.867182] PM: resume of devices complete after 5848.036 msecs
[ 168.870275] usbled 1-1:1.0: >USB LED device now attached
[ 168.870515] PM: Finishing wakeup.
[ 168.870517] Restarting tasks ... done.
[ 176.277775] r8169 0000:02:00.0: >eth0: link up
[ 176.278693] br0: port 1(eth0) entered forwarding state
[ 176.278710] br0: port 1(eth0) entered forwarding state
[ 191.328010] br0: port 1(eth0) entered forwarding state
[ 223.320023] usbcore: deregistering interface driver usbhid
[ 223.392200] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input12
[ 223.392324] hid-generic 0003:046D:C505.0009: >input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[ 223.421057] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input13
[ 223.421236] hid-generic 0003:046D:C505.000A: >input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[ 223.463458] usbcore: registered new interface driver usbhid
[ 223.463461] usbhid: USB HID core driver
[ 223.481672] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input14
[ 223.482813] logitech 0003:046D:C517.000B: >input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input0
[ 223.482825] logitech 0003:046D:C517.000C: >fixing up Logitech keyboard report descriptor
[ 223.483517] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input15
[ 223.485858] logitech 0003:046D:C517.000C: >input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input1
[ 8224.840065] usb 4-1: >USB disconnect, device number 3
[ 8228.828019] usb 4-1: >new full-speed USB device number 4 using uhci_hcd
[ 8229.009063] usb 4-1: >New USB device found, idVendor=03f0, idProduct=0a01
[ 8229.009069] usb 4-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=12
[ 8229.009073] usb 4-1: >Product: hp scanjet scanner
[ 8229.009076] usb 4-1: >Manufacturer: Hewlett-Packard
[ 8229.009079] usb 4-1: >SerialNumber: CN34QS114Q
[ 9341.832053] usb 4-1: >USB disconnect, device number 4
[ 9353.184020] usb 4-1: >new full-speed USB device number 5 using uhci_hcd
[ 9353.369044] usb 4-1: >New USB device found, idVendor=03f0, idProduct=0a01
[ 9353.369050] usb 4-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=12
[ 9353.369054] usb 4-1: >Product: hp scanjet scanner
[ 9353.369057] usb 4-1: >Manufacturer: Hewlett-Packard
[ 9353.369060] usb 4-1: >SerialNumber: CN34QS114Q
[29833.510155] PM: Syncing filesystems ... done.
[29833.670363] PM: Preparing system for mem sleep
[29833.761508] Freezing user space processes ... (elapsed 0.01 seconds) done.
[29833.776137] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[29833.792084] PM: Entering mem sleep
[29833.792111] Suspending console(s) (use no_console_suspend to debug)
[29833.792550] usbled 1-1:1.0: >USB LED now disconnected
[29833.792790] sd 3:0:0:0: >[sdb] Synchronizing SCSI cache
[29833.792907] sd 2:0:0:0: >[sda] Synchronizing SCSI cache
[29833.793078] sd 2:0:0:0: >[sda] Stopping disk
[29833.800158] sd 3:0:0:0: >[sdb] Stopping disk
[29833.800236] serial 00:0f: >disabled
[29833.800244] serial 00:0f: >wake-up capability disabled by ACPI
[29833.800257] i8042 kbd 00:0b: >wake-up capability enabled by ACPI
[29833.800527] parport_pc 00:06: >disabled
[29833.800825] [drm] nouveau 0000:04:00.0: Disabling display...
[29833.855502] [drm] nouveau 0000:04:00.0: Disabling fbcon...
[29833.855525] [drm] nouveau 0000:04:00.0: Unpinning framebuffer(s)...
[29833.855577] [drm] nouveau 0000:04:00.0: Evicting buffers...
[29833.908130] ACPI handle has no context!
[29834.461498] [drm] nouveau 0000:04:00.0: Idling channels...
[29834.461986] [drm] nouveau 0000:04:00.0: Suspending GPU objects...
[29835.889447] [drm] nouveau 0000:04:00.0: And we're gone!
[29835.904051] PM: suspend of devices complete after 2111.671 msecs
[29835.904336] PM: late suspend of devices complete after 0.282 msecs
[29835.904545] pcieport 0000:00:1c.3: >wake-up capability enabled by ACPI
[29835.920128] ehci_hcd 0000:00:1d.7: >wake-up capability enabled by ACPI
[29835.936040] uhci_hcd 0000:00:1d.3: >wake-up capability enabled by ACPI
[29835.936066] uhci_hcd 0000:00:1d.2: >wake-up capability enabled by ACPI
[29835.936092] uhci_hcd 0000:00:1d.1: >wake-up capability enabled by ACPI
[29835.936118] uhci_hcd 0000:00:1d.0: >wake-up capability enabled by ACPI
[29835.936235] PM: noirq suspend of devices complete after 31.896 msecs
[29835.937045] ACPI: Preparing to enter system sleep state S3
[29835.937333] PM: Saving platform NVS memory
[29835.937986] Disabling non-boot CPUs ...
[29836.040014] CPU 1 is now offline
[29836.040461] ACPI: Low-level resume complete
[29836.040461] PM: Restoring platform NVS memory
[29836.040461] Enabling non-boot CPUs ...
[29836.040461] Booting Node 0 Processor 1 APIC 0x1
[29835.939357] Initializing CPU#1
[29836.056040] CPU1 is up
[29836.058914] ACPI: Waking up from system sleep state S3
[29836.059430] uhci_hcd 0000:00:1d.0: >wake-up capability disabled by ACPI
[29836.059460] uhci_hcd 0000:00:1d.1: >wake-up capability disabled by ACPI
[29836.059489] uhci_hcd 0000:00:1d.2: >wake-up capability disabled by ACPI
[29836.059518] uhci_hcd 0000:00:1d.3: >wake-up capability disabled by ACPI
[29836.059562] ehci_hcd 0000:00:1d.7: >wake-up capability disabled by ACPI
[29836.060082] PM: noirq resume of devices complete after 0.902 msecs
[29836.060216] PM: early resume of devices complete after 0.098 msecs
[29836.060292] snd_hda_intel 0000:00:1b.0: >irq 44 for MSI/MSI-X
[29836.060368] uhci_hcd 0000:00:1d.0: >setting latency timer to 64
[29836.060391] [drm] nouveau 0000:04:00.0: We're back, enabling device...
[29836.060394] usb usb1: >root hub lost power or was reset
[29836.060401] [drm] nouveau 0000:04:00.0: POSTing device...
[29836.060403] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 0 at offset 0xD0BE
[29836.060416] uhci_hcd 0000:00:1d.1: >setting latency timer to 64
[29836.060477] usb usb2: >root hub lost power or was reset
[29836.060510] uhci_hcd 0000:00:1d.2: >setting latency timer to 64
[29836.060531] usb usb3: >root hub lost power or was reset
[29836.060553] uhci_hcd 0000:00:1d.3: >setting latency timer to 64
[29836.060574] usb usb4: >root hub lost power or was reset
[29836.060589] ehci_hcd 0000:00:1d.7: >setting latency timer to 64
[29836.060618] pci 0000:00:1e.0: >setting latency timer to 64
[29836.060641] pcieport 0000:00:1c.3: >wake-up capability disabled by ACPI
[29836.062559] ata_piix 0000:00:1f.1: >setting latency timer to 64
[29836.062569] ata_piix 0000:00:1f.2: >setting latency timer to 64
[29836.062587] sata_sil 0000:01:01.0: >Applying R_ERR on DMA activate FIS errata fix
[29836.068303] parport_pc 00:06: >activated
[29836.068315] i8042 kbd 00:0b: >wake-up capability disabled by ACPI
[29836.068905] ns558 00:0d: >activated
[29836.069542] mpu401 00:0e: >activated
[29836.070249] serial 00:0f: >activated
[29836.085758] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 1 at offset 0xD4D3
[29836.142230] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 2 at offset 0xE4C4
[29836.142257] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 3 at offset 0xE60D
[29836.144006] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table 4 at offset 0xE849
[29836.144008] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0xE8AE
[29836.163892] [drm] nouveau 0000:04:00.0: Restoring GPU objects...
[29836.339740] [drm] nouveau 0000:04:00.0: Reinitialising engines...
[29836.340313] [drm] nouveau 0000:04:00.0: Restoring mode...
[29836.341006] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 (SET FEATURES) filtered out
[29836.341009] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[29836.356243] r8169 0000:02:00.0: >eth0: link down
[29836.356887] ata1.00: configured for UDMA/66
[29836.371022] br0: port 1(eth0) entered disabled state
[29836.384033] ata5: SATA link down (SStatus 0 SControl 310)
[29836.384074] ata6: SATA link down (SStatus 0 SControl 310)
[29836.544014] usb 1-1: >reset low-speed USB device number 3 using uhci_hcd
[29836.944028] usb 2-1: >reset full-speed USB device number 5 using uhci_hcd
[29837.340028] usb 2-2: >reset low-speed USB device number 6 using uhci_hcd
[29837.740016] usb 4-1: >reset full-speed USB device number 5 using uhci_hcd
[29838.137626] usb 2-1.3: >reset low-speed USB device number 7 using uhci_hcd
[29838.486626] usbhid 2-1.3:1.1: >reset_resume error 1
[29841.104010] ata3: link is slow to respond, please be patient (ready=0)
[29841.104014] ata4: link is slow to respond, please be patient (ready=0)
[29842.452244] ata4.00: configured for UDMA/133
[29842.452280] sd 3:0:0:0: >[sdb] Starting disk
[29842.564240] ata3.00: configured for UDMA/133
[29842.564274] sd 2:0:0:0: >[sda] Starting disk
[29842.568446] input input12: >event field not found
[29842.568448] input input12: >event field not found
[29842.568450] input input12: >event field not found
[29842.568452] input input12: >event field not found
[29842.568454] input input12: >event field not found
[29842.568456] input input12: >event field not found
[29842.568458] input input12: >event field not found
[29842.568475] input input13: >event field not found
[29842.568477] input input13: >event field not found
[29842.568479] input input13: >event field not found
[29842.568480] input input13: >event field not found
[29842.568482] input input13: >event field not found
[29842.568484] input input13: >event field not found
[29842.568486] input input13: >event field not found
[29842.568544] PM: resume of devices complete after 6508.324 msecs
[29842.571718] usbled 1-1:1.0: >USB LED device now attached
[29842.571990] PM: Finishing wakeup.
[29842.571992] Restarting tasks ... done.
[29848.460931] r8169 0000:02:00.0: >eth0: link up
[29848.461849] br0: port 1(eth0) entered forwarding state
[29848.461870] br0: port 1(eth0) entered forwarding state
[29863.488012] br0: port 1(eth0) entered forwarding state
[29865.228052] usbcore: deregistering interface driver usbhid
[29865.316150] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input16
[29865.316283] hid-generic 0003:046D:C505.000D: >input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
[29865.346942] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.1/input/input17
[29865.348298] hid-generic 0003:046D:C505.000E: >input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
[29865.391334] usbcore: registered new interface driver usbhid
[29865.391338] usbhid: USB HID core driver
[29865.440198] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input18
[29865.441329] logitech 0003:046D:C517.000F: >input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input0
[29865.441340] logitech 0003:046D:C517.0010: >fixing up Logitech keyboard report descriptor
[29865.441975] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input19
[29865.442845] logitech 0003:046D:C517.0010: >input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input1
Reply to: