Bug#680747: Crashed again: maybe the crash belongs to xorg/nouveau?
Hello,
in the meantime I had two crashes.
the first time nothing was shown via netconsole, see ~ line 536 in the
attached netconsole.log
second crash, beginning at line 1585 in netconsole.log:
[ 1911.613543] general protection fault: 0000 [#1] SMP
[ 1911.613579] CPU 1
[ 1911.613585] Modules linked in: snd_hrtimer ip6table_filter ip6_tables
iptable_filter ip_tables x_tables cpufreq_stats cpufreq_userspace
cpufreq_conservative ppdev lp bnep rfcomm bluetooth rfkill crc16
binfmt_misc uinput fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd
sunrpc ext3 mbcache jbd netconsole configfs hwmon_vid wire cn bridge stp
usblp sata_mv powernow_k8 mperf ahci libahci cpufreq_powersave sg
aic79xx aic7xxx scsi_transport_spi msr cpuid aes_x86_64 aes_generic
firewire_sbp2 loop dm_crypt snd_hda_codec_analog snd_hda_intel
snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc
snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq parport_pc parport
psmouse shpchp snd_seq_device snd_timer i2c_nforce2 edac_mce_amd
edac_core pcspkr serio_raw k8temp processor snd soundcore asus_atk0110
evdev reiserfs raid1 md_mod dm_mirror dm_region_hash dm_log dm_mod
vga16fb vgastate usbhid hid sr_mod cdrom sd_mod crc_t10dif nouveau
ata_generic sata_nv ohci_hcd pata_amd libata ehci_hcd video mxm_wmi wmi
i2c_algo_bit drm_kms_helper ttm drm firewire_ohci fan thermal button
firewire_core crc_itu_t scsi_mod usbcore forcedeth i2c_core thermal_sys
usb_common [last unloaded: scsi_wait_scan]
[ 1911.614575]
[ 1911.614583] Pid: 3037, comm: Xorg Not tainted 3.2.0-2-amd64 #1 System
manufacturer System Product Name/M2N32 WS Professional
[ 1911.614610] RIP: 0010:[<ffffffff81282e5a>] [<ffffffff81282e5a>]
skb_drop_fraglist+0x1f/0x2e
[ 1911.614633] RSP: 0018:ffff8801124fdbf8 EFLAGS: 00010286
[ 1911.614643] RAX: ffff880039587e9a RBX: ffff8801177cd180 RCX:
ffff8800321d4000
[ 1911.614656] RDX: ffff88003958401a RSI: 0000000000000016 RDI:
29a1d2c3f1ac0000
[ 1911.614668] RBP: 0000000000000000 R08: ffff8800321d4000 R09:
ffff88004d0c0000
[ 1911.614681] R10: ffff88004d05c000 R11: ffff88004d05c000 R12:
ffff8801177cd180
[ 1911.614693] R13: 0000000000036b00 R14: ffff8801124fdd50 R15:
0000000000000000
[ 1911.614706] FS: 00007ff1ded50880(0000) GS:ffff88011fc80000(0000)
knlGS:00000000f2800b70
[ 1911.614721] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1911.614732] CR2: 00007ff1d01d6000 CR3: 000000011878d000 CR4:
00000000000006e0
[ 1911.614744] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 1911.614757] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 1911.614769] Process Xorg (pid: 3037, threadinfo ffff8801124fc000,
task ffff880115b9c9b0)
[ 1911.614782] Stack:
[ 1911.614788] ffff8801177cd180 ffffffff81282b25 0000000000000000
ffff8801177cd180
[ 1911.614816] ffff880118c50a40 ffffffff81282b49 ffff8801124fdd88
ffffffff812f4ceb
[ 1911.614842] ffff880090bba400 ffffffff81037d6e ffffffff81036457
ffff8801124fdce0
[ 1911.614869] Call Trace:
[ 1911.614879] [<ffffffff81282b25>] ? skb_release_data+0xa4/0xb7
[ 1911.614892] [<ffffffff81282b49>] ? __kfree_skb+0x11/0x77
[ 1911.614913] [<ffffffff812f4ceb>] ? unix_stream_recvmsg+0x47f/0x511
[ 1911.614927] [<ffffffff81037d6e>] ? __wake_up+0x35/0x46
[ 1911.614938] [<ffffffff81036457>] ? should_resched+0x5/0x23
[ 1911.614978] [<ffffffffa02d720a>] ? __nouveau_fence_unref+0x1c/0x25
[nouveau]
[ 1911.614993] [<ffffffff8127c075>] ? sock_aio_read.part.9+0x113/0x127
[ 1911.615017] [<ffffffffa02d7c51>] ?
drm_gem_object_unreference_unlocked+0x2b/0x3b [nouveau]
[ 1911.615045] [<ffffffffa02d91c6>] ?
nouveau_gem_ioctl_cpu_prep+0x6c/0x79 [nouveau]
[ 1911.615060] [<ffffffff810f8e7a>] ? do_sync_read+0xab/0xe3
[ 1911.615072] [<ffffffff810f956c>] ? vfs_read+0xa6/0xe6
[ 1911.615083] [<ffffffff810f95f1>] ? sys_read+0x45/0x6b
[ 1911.615095] [<ffffffff8134f3d2>] ? system_call_fastpath+0x16/0x1b
[ 1911.615106] Code: e8 80 e2 ff [ 0.000000] Initializing cgroup
subsys cpuset
seems the problem is with Xorg / nouveau. I'll install the corresponding
debug-packages.
sincerely,
Christoph
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 17:24:18 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32 WS Professional, BIOS ASUS M2N32 WS Pro ACPI BIOS Revision 2001 05/05/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back
[ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable
[ 0.000000] 4 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6040] f6040
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfeb0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfeb0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfeaa000-dfeb0000
[ 0.000000] RAMDISK: 36152000 - 370a1000
[ 0.000000] ACPI: RSDP 00000000000f7f20 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000dfeeb480 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000dfee3280 08189 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000dfeb0000 00040
[ 0.000000] ACPI: TCPA 00000000dfeeb6c0 00032 (v01 HTC HTCACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000dfeeb740 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 00000000dfeeba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000dfeeb5c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048127
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898792 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfeb0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031994
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ d4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000
[ 0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
[ 0.000000] Memory: 3976876k/4718592k available (3407k kernel code, 526084k absent, 215632k reserved, 3326k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2209.958 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.008038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.91 BogoMIPS (lpj=8839832)
[ 0.008107] pid_max: default: 32768 minimum: 301
[ 0.008199] Security Framework initialized
[ 0.008235] AppArmor: AppArmor disabled by boot time parameter
[ 0.012394] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014990] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.016374] Mount-cache hash table entries: 256
[ 0.016574] Initializing cgroup subsys cpuacct
[ 0.016612] Initializing cgroup subsys memory
[ 0.016660] Initializing cgroup subsys devices
[ 0.016694] Initializing cgroup subsys freezer
[ 0.016729] Initializing cgroup subsys net_cls
[ 0.016762] Initializing cgroup subsys blkio
[ 0.016805] Initializing cgroup subsys perf_event
[ 0.016870] tseg: 00dff00000
[ 0.016903] CPU: Physical Processor ID: 0
[ 0.016935] CPU: Processor Core ID: 0
[ 0.016968] mce: CPU supports 5 MCE banks
[ 0.017009] using AMD E400 aware idle routine
[ 0.017373] ACPI: Core revision 20110623
[ 0.024499] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.064240] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 0.068003] Performance Events: AMD PMU driver.
[ 0.068003] ... version: 0
[ 0.068003] ... bit width: 48
[ 0.068003] ... generic registers: 4
[ 0.068003] ... value mask: 0000ffffffffffff
[ 0.068003] ... max period: 00007fffffffffff
[ 0.068003] ... fixed-purpose events: 0
[ 0.068003] ... event mask: 000000000000000f
[ 0.068003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.068003] Booting Node 0, Processors #1
[ 0.068003] smpboot cpu 1: start_ip = 9a000
[ 0.156088] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.156145] Brought up 2 CPUs
[ 0.156178] Total of 2 processors activated (8840.31 BogoMIPS).
[ 0.156717] devtmpfs: initialized
[ 0.160266] PM: Registering ACPI NVS region at dfeb0000 (208896 bytes)
[ 0.160266] print_constraints: dummy:
[ 0.160360] NET: Registered protocol family 16
[ 0.160521] node 0 link 0: io port [a000, ffff]
[ 0.160556] TOM: 00000000e0000000 aka 3584M
[ 0.160589] node 0 link 0: mmio [a0000, bffff]
[ 0.160645] node 0 link 0: mmio [e0000000, efffffff]
[ 0.160700] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.160755] node 0 link 0: mmio [f0000000, f09fffff]
[ 0.160811] TOM2: 0000000120000000 aka 4608M
[ 0.160844] bus: [00, 09] on node 0 link 0
[ 0.160879] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.160912] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.160947] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff]
[ 0.160981] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[ 0.161015] bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
[ 0.161058] ACPI: bus type pci registered
[ 0.161171] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.161217] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.168043] PCI: Using configuration type 1 for base access
[ 0.168925] bio: create slab <bio-0> at 0
[ 0.168925] ACPI: Added _OSI(Module Device)
[ 0.168925] ACPI: Added _OSI(Processor Device)
[ 0.168925] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.168925] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.169417] ACPI: EC: Look up EC in DSDT
[ 0.178247] ACPI: Interpreter enabled
[ 0.178289] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.178453] ACPI: Using IOAPIC for interrupt routing
[ 0.186308] ACPI: No dock devices found.
[ 0.186345] HEST: Table not found.
[ 0.186380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.186497] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.186682] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.186719] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.186754] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.186798] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.186841] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470c]
[ 0.186876] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.186920] pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.186964] pci_root PNP0A08:00: host bridge window expanded to [io 0x0d00-0xffff]; [io 0x4700-0x470c] ignored
[ 0.187023] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500
[ 0.187099] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.187162] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.187232] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.187301] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.187370] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.187436] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.187496] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.187570] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.267742] pnp 00:0a: [mem 0xfff90000-0xfffbffff]
[ 0.267776] pnp 00:0a: [mem 0xfffed000-0xfffeffff]
[ 0.267919] system 00:0a: [mem 0x000cde00-0x000cffff] has been reserved
[ 0.267956] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.267993] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.268021] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.268058] system 00:0a: [mem 0xfefff000-0xfefff0ff] has been reserved
[ 0.268095] system 00:0a: [mem 0xdfeb0000-0xdfefffff] could not be reserved
[ 0.268168] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.268205] system 00:0a: [mem 0x00100000-0xdfeaffff] could not be reserved
[ 0.271420] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.271493] system 00:0a: [mem 0xfefff000-0xfeffffff] could not be reserved
[ 0.271530] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.271602] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.271639] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.271684] pnp: PnP ACPI: found 11 devices
[ 0.278887] Switching to clocksource acpi_pm
[ 0.279157] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279202] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.279237] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.279321] pci 0000:03:00.1: PCI bridge to [bus 05-05]
[ 0.279367] pci 0000:00:12.0: PCI bridge to [bus 03-05]
[ 0.279402] pci 0000:00:12.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.279478] pci 0000:00:15.0: PCI bridge to [bus 07-07]
[ 0.279516] pci 0000:00:16.0: PCI bridge to [bus 08-08]
[ 0.279596] pci 0000:00:04.0: setting latency timer to 64
[ 0.279633] pci 0000:00:0e.0: setting latency timer to 64
[ 0.279711] pci 0000:03:00.0: setting latency timer to 64
[ 0.279962] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.279962] pci 0000:03:00.1: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.279962] pci 0000:00:14.0: setting latency timer to 64
[ 0.279962] pci 0000:00:15.0: setting latency timer to 64
[ 0.279962] pci 0000:00:17.0: setting latency timer to 64
[ 0.279962] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.279962] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.279962] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.279962] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.279962] pci_bus 0000:00: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.279962] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.279962] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.279962] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.279962] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.279962] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.279962] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.279962] pci_bus 0000:02: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.279962] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.279962] NET: Registered protocol family 2
[ 0.279962] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.285305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.285928] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.286011] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.286098] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.286399] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.286692] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.286741] pci 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 0.356299] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.356351] pci 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.356421] pci 0000:00:0a.1: PCI INT B disabled
[ 0.356583] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.356660] pci 0000:00:0d.2: Enabling HT MSI Mapping
[ 0.356738] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.356911] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.357008] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.357213] pci 0000:00:14.0: Enabling HT MSI Mapping
[ 0.357323] pci 0000:00:15.0: Enabling HT MSI Mapping
[ 0.357560] pci 0000:00:17.0: Enabling HT MSI Mapping
[ 0.357612] pci 0000:01:00.0: Boot video device
[ 0.357752] Unpacking initramfs...
[ 0.753921] Freeing initrd memory: 15676k freed
[ 0.764893] PCI-DMA: Disabling AGP.
[ 0.765023] PCI-DMA: aperture base @ d4000000 size 65536 KB
[ 0.765093] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.769505] audit: initializing netlink socket (disabled)
[ 0.797947] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.823890] VFS: Disk quotas dquot_6.5.2
[ 0.823966] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.824358] alg: No test for stdrng (krng)
[ 0.824449] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.824529] io scheduler deadline registered
[ 0.824583] io scheduler cfq registered (default)
[ 0.824804] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.825004] pcieport 0000:00:12.0: setting latency timer to 64
[ 0.825063] pcieport 0000:00:12.0: irq 41 for MSI/MSI-X
[ 0.825243] pcieport 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.825364] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.825420] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 0.825598] pcieport 0000:00:16.0: irq 44 for MSI/MSI-X
[ 0.825721] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.826014] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.826083] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.826118] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.826722] GHES: HEST is not enabled!
[ 0.826830] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.847242] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.940267] Linux agpgart interface v0.103
[ 0.940447] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.940935] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.941150] mousedev: PS/2 mouse device common for all mice
[ 0.941242] rtc_cmos 00:04: RTC can wake from S4
[ 0.941423] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.941536] cpuidle: using governor ladder
[ 0.941570] cpuidle: using governor menu
[ 0.941923] NET: Registered protocol family 10
[ 0.942509] Mobile IPv6
[ 0.942577] Registering the dns_resolver key type
[ 0.942815] PM: Hibernation image not present or could not be loaded.
[ 0.942860] registered taskstats version 1
[ 0.956285] Initializing network drop monitor service
[ 0.957828] Freeing unused kernel memory: 572k freed
[ 0.961352] Freeing unused kernel memory: 672k freed
[ 0.965155] Freeing unused kernel memory: 684k freed
[ 0.990005] udevd[96]: starting version 175
[ 1.059581] usbcore: registered new interface driver usbfs
[ 1.059645] usbcore: registered new interface driver hub
[ 1.079407] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.079993] [drm] Initialized drm 1.1.0 20060810
[ 1.080042] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.080387] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
[ 1.080434] forcedeth 0000:00:10.0: setting latency timer to 64
[ 1.083138] ACPI: Power Button [PWRB]
[ 1.083272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.083316] ACPI: Power Button [PWRF]
[ 1.093712] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[ 1.093807] ACPI: [Package] has zero elements (ffff8801180f29c0)
[ 1.093842] ACPI: Invalid passive threshold
[ 1.094111] ACPI: Thermal Zone [THRM] (40 C)
[ 1.099322] ACPI: Fan [FAN] (on)
[ 1.112299] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.112363] firewire_ohci 0000:02:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1.160157] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 1.160200] nouveau 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 1.161694] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b200b1)
[ 1.163636] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 1.212206] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1.212280] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.50
[ 1.212316] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[ 1.212394] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 1.212439] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 1.212476] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03000302 00000000
[ 1.212512] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 1.212584] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 020223f1 0040c083
[ 1.212621] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 1.212658] [drm] nouveau 0000:01:00.0: 0: 0x00000030: type 0x30 idx 0 tag 0xff
[ 1.212746] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 1.212790] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 1.212881] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCDED
[ 1.213177] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD497
[ 1.225402] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDD16
[ 1.228569] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDF22
[ 1.228674] firewire_ohci: Added fw-ohci device 0000:02:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.247467] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 1.247557] [drm] nouveau 0000:01:00.0: c: core 351MHz shader 351MHz memory 265MHz
[ 1.247762] [TTM] Zone kernel: Available graphics memory: 2030216 kiB.
[ 1.247798] [TTM] Initializing pool allocator.
[ 1.250820] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1.250972] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 1.302368] [drm] No driver support for vblank timestamp query.
[ 1.302415] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 1.302468] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1.302560] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[ 1.302604] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
[ 1.488385] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ffff880117004400
[ 1.502202] [drm] nouveau 0000:01:00.0: 0xC241: Parsing digital output script table
[ 1.551824] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 1.552740] Console: switching to colour frame buffer device 128x48
[ 1.553643] fb0: nouveaufb frame buffer device
[ 1.553660] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 1.604743] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:06:5d
[ 1.604766] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.605098] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 20 (level, low) -> IRQ 20
[ 1.605112] forcedeth 0000:00:11.0: setting latency timer to 64
[ 2.128767] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:08:8e
[ 2.128783] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.128883] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 2.128939] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 2.128976] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 2.129026] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported
[ 2.129058] ehci_hcd 0000:00:0a.1: irq 22, io mem 0xfe02e000
[ 2.140070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.140395] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.140701] usb usb1: Product: EHCI Host Controller
[ 2.141340] usb usb1: SerialNumber: 0000:00:0a.1
[ 2.141915] hub 1-0:1.0: USB hub found
[ 2.142216] hub 1-0:1.0: 10 ports detected
[ 2.143119] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 2.143471] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 2.145034] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[ 2.202029] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.202331] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.202913] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 2.203208] usb usb2: SerialNumber: 0000:00:0a.0
[ 2.204074] hub 2-0:1.0: 10 ports detected
[ 2.204558] sata_nv 0000:00:0d.0: version 3.5
[ 2.205034] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 2.205582] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 2.206333] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 2.207968] scsi1 : sata_nv
[ 2.208417] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 2.208682] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 2.209512] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 2.209778] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 2.211147] scsi2 : sata_nv
[ 2.211504] scsi3 : sata_nv
[ 2.211905] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 2.212706] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 2.212963] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 2.213898] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 2.214934] scsi5 : sata_nv
[ 2.215328] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 21
[ 2.215582] ata6: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 21
[ 2.216452] pata_amd 0000:00:0c.0: setting latency timer to 64
[ 2.217128] scsi6 : pata_amd
[ 2.217486] scsi7 : pata_amd
[ 2.218464] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 2.380397] ata7.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[ 25.849842] netconsole: network logging started
[ 27.486605] scsi_verify_blk_ioctl: 606 callbacks suppressed
[ 27.487204] mdadm: sending ioctl 1261 to a partition!
[ 27.487753] mdadm: sending ioctl 1261 to a partition!
[ 28.023058] mdadm: sending ioctl 1261 to a partition!
[ 28.023671] mdadm: sending ioctl 1261 to a partition!
[ 28.136389] mdadm: sending ioctl 1261 to a partition!
[ 28.137012] mdadm: sending ioctl 1261 to a partition!
[ 28.355480] md: resync of RAID array md3
[ 28.356130] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 28.356718] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 28.357316] md: using 128k window, over a total of 1953510841k.
[ 28.515777] mdadm: sending ioctl 1261 to a partition!
[ 28.516509] mdadm: sending ioctl 1261 to a partition!
[ 28.559754] mdadm: sending ioctl 1261 to a partition!
[ 28.560516] mdadm: sending ioctl 1261 to a partition!
[ 28.795289] kjournald starting. Commit interval 5 seconds
[ 28.811559] EXT3-fs (md0): using internal journal
[ 28.812260] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 28.813711] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[ 28.814426] REISERFS (device md2): using ordered data mode
[ 28.815055] reiserfs: using flush barriers
[ 28.827101] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 28.830847] REISERFS (device md2): checking transaction log (md2)
[ 28.927092] REISERFS (device md2): Using r5 hash to sort names
[ 28.960082] REISERFS (device md3): found reiserfs format "3.6" with standard journal
[ 28.960884] REISERFS (device md3): using ordered data mode
[ 28.961534] reiserfs: using flush barriers
[ 28.963355] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 28.967047] REISERFS (device md3): checking transaction log (md3)
[ 29.044084] REISERFS (device md3): Using r5 hash to sort names
[ 31.587099] RPC: Registered named UNIX socket transport module.
[ 31.587946] RPC: Registered udp transport module.
[ 31.588668] RPC: Registered tcp transport module.
[ 31.589460] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 31.685078] FS-Cache: Loaded
[ 31.743118] FS-Cache: Netfs 'nfs' registered for caching
[ 31.769897] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 32.304038] eth1: no IPv6 routers present
[ 35.427397] fuse init (API version 7.17)
[ 39.262157] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X
[ 41.311436] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 43.835917] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 43.856519] [drm] nouveau 0000:01:00.0: 0xC24F: Parsing digital output script table
[ 43.906366] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 43.906382] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 49.808044] eth2: no IPv6 routers present
[ 52.169224] Bluetooth: Core ver 2.16
[ 52.169319] NET: Registered protocol family 31
[ 52.169328] Bluetooth: HCI device and connection manager initialized
[ 52.169347] Bluetooth: HCI socket layer initialized
[ 52.169354] Bluetooth: L2CAP socket layer initialized
[ 52.169756] Bluetooth: SCO socket layer initialized
[ 52.335567] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 52.335592] Bluetooth: BNEP filters: protocol multicast
[ 52.516674] Bluetooth: RFCOMM TTY layer initialized
[ 52.516739] Bluetooth: RFCOMM socket layer initialized
[ 52.516747] Bluetooth: RFCOMM ver 1.11
[ 59.997467] lp0: using parport0 (interrupt-driven).
[ 60.065884] ppdev: user-space parallel port driver
[ 101.741296] postgres (6222): /proc/6222/oom_adj is deprecated, please use /proc/6222/oom_score_adj instead.
[ 109.014991] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 109.879052] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 110.682594] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 110.682649] NFSD: starting 90-second grace period
[ 737.278676] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1701.575255] md: md1: resync done.
[ 1701.625989] RAID1 conf printout:
[ 1701.626016] --- wd:2 rd:2
[ 1701.626043] disk 0, wo:0, o:1, dev:sda3
[ 1701.626052] disk 1, wo:0, o:1, dev:sdb3
[24814.861219] md: md3: resync done.
[24814.992358] RAID1 conf printout:
[24814.992396] --- wd:2 rd:2
[24814.992424] disk 0, wo:0, o:1, dev:sdc1
[24814.992432] disk 1, wo:0, o:1, dev:sdd1
[67988.684418] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[69819.270477] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[69822.907393] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[70513.271546] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[72925.869821] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[73849.238158] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[73863.643213] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 17:24:18 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32 WS Professional, BIOS ASUS M2N32 WS Pro ACPI BIOS Revision 2001 05/05/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back
[ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable
[ 0.000000] 4 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6040] f6040
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfeb0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfeb0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfeaa000-dfeb0000
[ 0.000000] RAMDISK: 36152000 - 370a1000
[ 0.000000] ACPI: RSDP 00000000000f7f20 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000dfeeb480 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000dfee3280 08189 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000dfeb0000 00040
[ 0.000000] ACPI: TCPA 00000000dfeeb6c0 00032 (v01 HTC HTCACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000dfeeb740 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 00000000dfeeba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000dfeeb5c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048127
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898792 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfeb0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031994
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ d4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000
[ 0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
[ 0.000000] Memory: 3976876k/4718592k available (3407k kernel code, 526084k absent, 215632k reserved, 3326k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2209.912 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4419.82 BogoMIPS (lpj=8839648)
[ 0.004107] pid_max: default: 32768 minimum: 301
[ 0.004198] Security Framework initialized
[ 0.004234] AppArmor: AppArmor disabled by boot time parameter
[ 0.008383] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010979] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012364] Mount-cache hash table entries: 256
[ 0.012564] Initializing cgroup subsys cpuacct
[ 0.012602] Initializing cgroup subsys memory
[ 0.012650] Initializing cgroup subsys devices
[ 0.012683] Initializing cgroup subsys freezer
[ 0.012719] Initializing cgroup subsys net_cls
[ 0.012752] Initializing cgroup subsys blkio
[ 0.012795] Initializing cgroup subsys perf_event
[ 0.012860] tseg: 00dff00000
[ 0.012893] CPU: Physical Processor ID: 0
[ 0.012925] CPU: Processor Core ID: 0
[ 0.012958] mce: CPU supports 5 MCE banks
[ 0.012999] using AMD E400 aware idle routine
[ 0.013363] ACPI: Core revision 20110623
[ 0.020491] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.060229] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152069] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152125] Brought up 2 CPUs
[ 0.152159] Total of 2 processors activated (8840.23 BogoMIPS).
[ 0.152698] devtmpfs: initialized
[ 0.156266] PM: Registering ACPI NVS region at dfeb0000 (208896 bytes)
[ 0.156266] print_constraints: dummy:
[ 0.156360] NET: Registered protocol family 16
[ 0.156521] node 0 link 0: io port [a000, ffff]
[ 0.156556] TOM: 00000000e0000000 aka 3584M
[ 0.156590] node 0 link 0: mmio [a0000, bffff]
[ 0.156645] node 0 link 0: mmio [e0000000, efffffff]
[ 0.156700] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.156756] node 0 link 0: mmio [f0000000, f09fffff]
[ 0.156811] TOM2: 0000000120000000 aka 4608M
[ 0.156845] bus: [00, 09] on node 0 link 0
[ 0.156879] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.156913] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.156947] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff]
[ 0.156981] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[ 0.157016] bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
[ 0.157059] ACPI: bus type pci registered
[ 0.157172] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.157218] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.164024] PCI: Using configuration type 1 for base access
[ 0.164907] bio: create slab <bio-0> at 0
[ 0.164907] ACPI: Added _OSI(Module Device)
[ 0.164907] ACPI: Added _OSI(Processor Device)
[ 0.164907] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.164907] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.165416] ACPI: EC: Look up EC in DSDT
[ 0.174370] ACPI: Interpreter enabled
[ 0.174411] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.174576] ACPI: Using IOAPIC for interrupt routing
[ 0.182447] ACPI: No dock devices found.
[ 0.182484] HEST: Table not found.
[ 0.182519] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.182635] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.182821] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.182858] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.182894] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.182937] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.182980] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470c]
[ 0.183016] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.183059] pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.183103] pci_root PNP0A08:00: host bridge window expanded to [io 0x0d00-0xffff]; [io 0x4700-0x470c] ignored
[ 0.183162] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500
[ 0.183239] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.183302] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.183371] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.183440] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.183510] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.183575] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.183635] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.183709] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.183768] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183804] pci 0000:00:04.0: PME# disabled
[ 0.183867] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500
[ 0.184091] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601
[ 0.184151] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.184204] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05
[ 0.184265] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.184304] pci 0000:00:09.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.184369] pci 0000:00:09.1: PME# supported from D3hot D3cold
[ 0.184407] pci 0000:00:09.1: PME# disabled
[ 0.184460] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03
[ 0.184502] pci 0000:00:0a.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.184570] pci 0000:00:0a.0: supports D1 D2
[ 0.184604] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184641] pci 0000:00:0a.0: PME# disabled
[ 0.184687] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03
[ 0.184729] pci 0000:00:0a.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.184800] pci 0000:00:0a.1: supports D1 D2
[ 0.184833] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184870] pci 0000:00:0a.1: PME# disabled
[ 0.184921] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101
[ 0.184973] pci 0000:00:0c.0: reg 20: [io 0xf400-0xf40f]
[ 0.185036] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101
[ 0.185079] pci 0000:00:0d.0: reg 10: [io 0x09f0-0x09f7]
[ 0.185116] pci 0000:00:0d.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.185154] pci 0000:00:0d.0: reg 18: [io 0x0970-0x0977]
[ 0.185191] pci 0000:00:0d.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.185229] pci 0000:00:0d.0: reg 20: [io 0xe000-0xe00f]
[ 0.185266] pci 0000:00:0d.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[ 0.185336] pci 0000:00:0d.1: [10de:037f] type 0 class 0x000101
[ 0.185379] pci 0000:00:0d.1: reg 10: [io 0x09e0-0x09e7]
[ 0.185416] pci 0000:00:0d.1: reg 14: [io 0x0be0-0x0be3]
[ 0.185454] pci 0000:00:0d.1: reg 18: [io 0x0960-0x0967]
[ 0.185491] pci 0000:00:0d.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.185529] pci 0000:00:0d.1: reg 20: [io 0xcc00-0xcc0f]
[ 0.185566] pci 0000:00:0d.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.185636] pci 0000:00:0d.2: [10de:037f] type 0 class 0x000101
[ 0.185679] pci 0000:00:0d.2: reg 10: [io 0xc800-0xc807]
[ 0.185716] pci 0000:00:0d.2: reg 14: [io 0xc400-0xc403]
[ 0.185754] pci 0000:00:0d.2: reg 18: [io 0xc000-0xc007]
[ 0.185792] pci 0000:00:0d.2: reg 1c: [io 0xbc00-0xbc03]
[ 0.185829] pci 0000:00:0d.2: reg 20: [io 0xb800-0xb80f]
[ 0.185867] pci 0000:00:0d.2: reg 24: [mem 0xfe02b000-0xfe02bfff]
[ 0.185940] pci 0000:00:0e.0: [10de:0370] type 1 class 0x000604
[ 0.186014] pci 0000:00:0e.1: [10de:0371] type 0 class 0x000403
[ 0.186058] pci 0000:00:0e.1: reg 10: [mem 0xfe020000-0xfe023fff]
[ 0.186133] pci 0000:00:0e.1: PME# supported from D3hot D3cold
[ 0.186169] pci 0000:00:0e.1: PME# disabled
[ 0.186226] pci 0000:00:10.0: [10de:0373] type 0 class 0x000680
[ 0.186272] pci 0000:00:10.0: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.186310] pci 0000:00:10.0: reg 14: [io 0xb400-0xb407]
[ 0.186347] pci 0000:00:10.0: reg 18: [mem 0xfe029000-0xfe0290ff]
[ 0.186386] pci 0000:00:10.0: reg 1c: [mem 0xfe028000-0xfe02800f]
[ 0.186455] pci 0000:00:10.0: supports D1 D2
[ 0.186488] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.186526] pci 0000:00:10.0: PME# disabled
[ 0.186578] pci 0000:00:11.0: [10de:0373] type 0 class 0x000680
[ 0.186623] pci 0000:00:11.0: reg 10: [mem 0xfe027000-0xfe027fff]
[ 0.186661] pci 0000:00:11.0: reg 14: [io 0xb000-0xb007]
[ 0.186699] pci 0000:00:11.0: reg 18: [mem 0xfe026000-0xfe0260ff]
[ 0.186737] pci 0000:00:11.0: reg 1c: [mem 0xfe025000-0xfe02500f]
[ 0.186806] pci 0000:00:11.0: supports D1 D2
[ 0.186840] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.186877] pci 0000:00:11.0: PME# disabled
[ 0.186928] pci 0000:00:12.0: [10de:0376] type 1 class 0x000604
[ 0.186994] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187031] pci 0000:00:12.0: PME# disabled
[ 0.187082] pci 0000:00:14.0: [10de:0374] type 1 class 0x000604
[ 0.187148] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187184] pci 0000:00:14.0: PME# disabled
[ 0.187235] pci 0000:00:15.0: [10de:0378] type 1 class 0x000604
[ 0.187301] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187337] pci 0000:00:15.0: PME# disabled
[ 0.187387] pci 0000:00:16.0: [10de:0375] type 1 class 0x000604
[ 0.187453] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187490] pci 0000:00:16.0: PME# disabled
[ 0.187540] pci 0000:00:17.0: [10de:0377] type 1 class 0x000604
[ 0.187606] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187642] pci 0000:00:17.0: PME# disabled
[ 0.187688] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.187741] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.187791] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.187841] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.187927] pci 0000:01:00.0: [10de:0392] type 0 class 0x000300
[ 0.187967] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.188018] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188060] pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
[ 0.188099] pci 0000:01:00.0: reg 24: [io 0xac00-0xac7f]
[ 0.188137] pci 0000:01:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref]
[ 0.188198] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.188248] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.188283] pci 0000:00:04.0: bridge window [io 0xa000-0xafff]
[ 0.188319] pci 0000:00:04.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.188356] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188436] pci 0000:02:0b.0: [104c:8023] type 0 class 0x000c00
[ 0.188481] pci 0000:02:0b.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.188522] pci 0000:02:0b.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
[ 0.188600] pci 0000:02:0b.0: supports D1 D2
[ 0.188633] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.188669] pci 0000:02:0b.0: PME# disabled
[ 0.188722] pci 0000:00:0e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.188760] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.188797] pci 0000:00:0e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.188841] pci 0000:00:0e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.188885] pci 0000:00:0e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.188930] pci 0000:00:0e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.192014] pci 0000:00:0e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.192059] pci 0000:00:0e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 0.192141] pci 0000:03:00.0: [1033:0125] type 1 class 0x000604
[ 0.192250] pci 0000:03:00.0: supports D1
[ 0.192283] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.192320] pci 0000:03:00.0: PME# disabled
[ 0.192380] pci 0000:03:00.1: [1033:0125] type 1 class 0x000604
[ 0.192432] pci 0000:03:00.1: reg 10: [mem 0xfdeff000-0xfdeff07f 64bit]
[ 0.192535] pci 0000:03:00.1: supports D1
[ 0.192568] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
[ 0.192605] pci 0000:03:00.1: PME# disabled
[ 0.192661] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.192714] pci 0000:00:12.0: PCI bridge to [bus 03-05]
[ 0.192751] pci 0000:00:12.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.192858] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[ 0.192983] pci 0000:03:00.1: PCI bridge to [bus 05-05]
[ 0.193064] pci 0000:00:14.0: PCI bridge to [bus 06-06]
[ 0.193126] pci 0000:00:15.0: PCI bridge to [bus 07-07]
[ 0.193187] pci 0000:00:16.0: PCI bridge to [bus 08-08]
[ 0.193249] pci 0000:00:17.0: PCI bridge to [bus 09-09]
[ 0.193300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.193700] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.193957] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.193994] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.194038] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.242384] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242716] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243044] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243374] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
[ 0.243653] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
[ 0.243929] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.244258] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
[ 0.244535] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.244863] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.245189] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.245518] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.245796] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
[ 0.246075] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.246351] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.246678] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.247008] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.247335] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.247664] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.247942] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.248226] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 0.248555] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.248790] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.249024] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.249258] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.249469] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 0.249681] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.249914] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.250126] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.250360] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.250658] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.250934] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[ 0.251210] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.251507] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.251785] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.252102] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.252399] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.252696] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.252995] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.253270] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.253546] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.253856] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.253856] vgaarb: loaded
[ 0.253856] vgaarb: bridge control possible 0000:01:00.0
[ 0.253856] PCI: Using ACPI for IRQ routing
[ 0.253856] PCI: pci_cache_line_size set to 64 bytes
[ 0.253856] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.253856] reserve RAM buffer: 00000000dfeb0000 - 00000000dfffffff
[ 0.258191] pnp: PnP ACPI init
[ 0.258275] ACPI: bus type pnp registered
[ 0.258447] pnp 00:00: [bus 00-ff]
[ 0.258481] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.258515] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.258549] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.258583] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.258618] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.258653] pnp 00:00: [io 0x4700-0x470c window]
[ 0.258687] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.258722] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.258852] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.258917] pnp 00:01: [io 0x1000-0x107f]
[ 0.258951] pnp 00:01: [io 0x1080-0x10ff]
[ 0.258985] pnp 00:01: [io 0x1400-0x147f]
[ 0.259018] pnp 00:01: [io 0x1480-0x14ff]
[ 0.259052] pnp 00:01: [io 0x1800-0x187f]
[ 0.259087] pnp 00:01: [io 0x1880-0x18ff]
[ 0.259213] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.259249] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 0.259285] system 00:01: [io 0x1400-0x147f] has been reserved
[ 0.259321] system 00:01: [io 0x1480-0x14ff] has been reserved
[ 0.259357] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.259392] system 00:01: [io 0x1880-0x18ff] has been reserved
[ 0.259428] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.259543] pnp 00:02: [io 0x0010-0x001f]
[ 0.259577] pnp 00:02: [io 0x0022-0x003f]
[ 0.259610] pnp 00:02: [io 0x0044-0x004d]
[ 0.259643] pnp 00:02: [io 0x0050-0x005f]
[ 0.259677] pnp 00:02: [io 0x0062-0x0063]
[ 0.259710] pnp 00:02: [io 0x0065-0x006f]
[ 0.259744] pnp 00:02: [io 0x0074-0x007f]
[ 0.259777] pnp 00:02: [io 0x0091-0x0093]
[ 0.259810] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.259844] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.259877] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.259910] pnp 00:02: [io 0x0800-0x087f]
[ 0.259944] pnp 00:02: [io 0x0290-0x0297]
[ 0.260083] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.260119] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.260155] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.260191] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260240] pnp 00:03: [dma 4]
[ 0.260273] pnp 00:03: [io 0x0000-0x000f]
[ 0.260307] pnp 00:03: [io 0x0080-0x0090]
[ 0.260340] pnp 00:03: [io 0x0094-0x009f]
[ 0.260374] pnp 00:03: [io 0x00c0-0x00df]
[ 0.260445] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.260543] pnp 00:04: [io 0x0070-0x0073]
[ 0.260589] pnp 00:04: [irq 8]
[ 0.260663] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.260707] pnp 00:05: [io 0x0061]
[ 0.260780] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.260825] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.260865] pnp 00:06: [irq 13]
[ 0.260940] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.261314] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.261355] pnp 00:07: [irq 4]
[ 0.261470] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.262028] pnp 00:08: [io 0x0378-0x037f]
[ 0.262062] pnp 00:08: [io 0x0778-0x077b]
[ 0.262101] pnp 00:08: [irq 7]
[ 0.262134] pnp 00:08: [dma 3]
[ 0.262243] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.263092] pnp 00:09: [mem 0xf0000000-0xf3ffffff]
[ 0.263223] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.263260] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.263455] pnp 00:0a: [mem 0x000cde00-0x000cffff]
[ 0.263490] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[ 0.263524] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[ 0.263558] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[ 0.263592] pnp 00:0a: [mem 0xfefff000-0xfefff0ff]
[ 0.263626] pnp 00:0a: [mem 0xdfeb0000-0xdfefffff]
[ 0.263660] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 0.263694] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.263728] pnp 00:0a: [mem 0x00100000-0xdfeaffff]
[ 0.263762] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.263798] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.263832] pnp 00:0a: [mem 0xfefff000-0xfeffffff]
[ 0.263866] pnp 00:0a: [mem 0xfff80000-0xfff80fff]
[ 0.263900] pnp 00:0a: [mem 0xfff90000-0xfffbffff]
[ 0.263934] pnp 00:0a: [mem 0xfffed000-0xfffeffff]
[ 0.264093] system 00:0a: [mem 0x000cde00-0x000cffff] has been reserved
[ 0.264130] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.264167] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.264204] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.264241] system 00:0a: [mem 0xfefff000-0xfefff0ff] has been reserved
[ 0.264277] system 00:0a: [mem 0xdfeb0000-0xdfefffff] could not be reserved
[ 0.264314] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.264351] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.264387] system 00:0a: [mem 0x00100000-0xdfeaffff] could not be reserved
[ 0.267603] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.267640] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.267676] system 00:0a: [mem 0xfefff000-0xfeffffff] could not be reserved
[ 0.267713] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.267749] system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.267786] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.267822] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.267867] pnp: PnP ACPI: found 11 devices
[ 0.267900] ACPI: ACPI bus type pnp unregistered
[ 0.275048] Switching to clocksource acpi_pm
[ 0.275126] PCI: max bus depth: 2 pci_try_num: 3
[ 0.275210] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.275245] pci 0000:00:04.0: bridge window [io 0xa000-0xafff]
[ 0.275281] pci 0000:00:04.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.275318] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.275363] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.275398] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.275437] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[ 0.275483] pci 0000:03:00.1: PCI bridge to [bus 05-05]
[ 0.275528] pci 0000:00:12.0: PCI bridge to [bus 03-05]
[ 0.275563] pci 0000:00:12.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.275602] pci 0000:00:14.0: PCI bridge to [bus 06-06]
[ 0.275639] pci 0000:00:15.0: PCI bridge to [bus 07-07]
[ 0.275677] pci 0000:00:16.0: PCI bridge to [bus 08-08]
[ 0.275715] pci 0000:00:17.0: PCI bridge to [bus 09-09]
[ 0.275757] pci 0000:00:04.0: setting latency timer to 64
[ 0.275794] pci 0000:00:0e.0: setting latency timer to 64
[ 0.275831] pci 0000:00:12.0: setting latency timer to 64
[ 0.275872] pci 0000:03:00.0: setting latency timer to 64
[ 0.275872] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.275872] pci 0000:03:00.1: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.275872] pci 0000:03:00.1: setting latency timer to 64
[ 0.275872] pci 0000:00:14.0: setting latency timer to 64
[ 0.275872] pci 0000:00:15.0: setting latency timer to 64
[ 0.275872] pci 0000:00:16.0: setting latency timer to 64
[ 0.275872] pci 0000:00:17.0: setting latency timer to 64
[ 0.275872] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.275872] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.275872] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.275872] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.275872] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.275872] pci_bus 0000:00: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.275872] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.275872] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.275872] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.275872] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.275872] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.275872] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.275872] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.275872] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.275872] pci_bus 0000:02: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.275872] pci_bus 0000:02: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.275872] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.275872] NET: Registered protocol family 2
[ 0.275872] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.276245] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.281298] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.281922] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.281959] TCP reno registered
[ 0.282004] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.282091] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.282308] NET: Registered protocol family 1
[ 0.282392] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.282684] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.282735] pci 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 0.352039] pci 0000:00:0a.0: PCI INT A disabled
[ 0.352299] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.352351] pci 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.352421] pci 0000:00:0a.1: PCI INT B disabled
[ 0.352504] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.352582] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.352660] pci 0000:00:0d.2: Enabling HT MSI Mapping
[ 0.352737] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.352819] pci 0000:00:0e.1: Enabling HT MSI Mapping
[ 0.352910] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.353007] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.353107] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 0.353212] pci 0000:00:14.0: Enabling HT MSI Mapping
[ 0.353322] pci 0000:00:15.0: Enabling HT MSI Mapping
[ 0.353438] pci 0000:00:16.0: Enabling HT MSI Mapping
[ 0.353559] pci 0000:00:17.0: Enabling HT MSI Mapping
[ 0.353611] pci 0000:01:00.0: Boot video device
[ 0.353653] PCI: CLS 32 bytes, default 64
[ 0.353752] Unpacking initramfs...
[ 0.749928] Freeing initrd memory: 15676k freed
[ 0.760925] PCI-DMA: Disabling AGP.
[ 0.761055] PCI-DMA: aperture base @ d4000000 size 65536 KB
[ 0.761090] PCI-DMA: using GART IOMMU.
[ 0.761125] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.765536] audit: initializing netlink socket (disabled)
[ 0.765590] type=2000 audit(1341748028.764:1): initialized
[ 0.793983] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.819912] VFS: Disk quotas dquot_6.5.2
[ 0.819988] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.820128] msgmni has been set to 7926
[ 0.820379] alg: No test for stdrng (krng)
[ 0.820469] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.820516] io scheduler noop registered
[ 0.820549] io scheduler deadline registered
[ 0.820603] io scheduler cfq registered (default)
[ 0.820824] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.820885] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.821023] pcieport 0000:00:12.0: setting latency timer to 64
[ 0.821082] pcieport 0000:00:12.0: irq 41 for MSI/MSI-X
[ 0.821205] pcieport 0000:00:14.0: setting latency timer to 64
[ 0.821262] pcieport 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.821383] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.821440] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 0.821561] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.821618] pcieport 0000:00:16.0: irq 44 for MSI/MSI-X
[ 0.821740] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.821797] pcieport 0000:00:17.0: irq 45 for MSI/MSI-X
[ 0.822033] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.822102] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.822138] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.822708] ERST: Table is not found!
[ 0.822741] GHES: HEST is not enabled!
[ 0.822849] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.843261] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.920570] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.936267] Linux agpgart interface v0.103
[ 0.936448] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.936896] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.936936] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.937151] mousedev: PS/2 mouse device common for all mice
[ 0.937243] rtc_cmos 00:04: RTC can wake from S4
[ 0.937424] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.937491] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.937538] cpuidle: using governor ladder
[ 0.937571] cpuidle: using governor menu
[ 0.937825] TCP cubic registered
[ 0.937925] NET: Registered protocol family 10
[ 0.938510] Mobile IPv6
[ 0.938543] NET: Registered protocol family 17
[ 0.938579] Registering the dns_resolver key type
[ 0.938816] PM: Hibernation image not present or could not be loaded.
[ 0.938861] registered taskstats version 1
[ 0.952187] rtc_cmos 00:04: setting system clock to 2012-07-08 11:47:09 UTC (1341748029)
[ 0.952284] Initializing network drop monitor service
[ 0.953827] Freeing unused kernel memory: 572k freed
[ 0.954102] Write protecting the kernel read-only data: 6144k
[ 0.957351] Freeing unused kernel memory: 672k freed
[ 0.961156] Freeing unused kernel memory: 684k freed
[ 0.985888] udevd[96]: starting version 175
[ 1.053705] SCSI subsystem initialized
[ 1.065499] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.065769] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 1.065822] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
[ 1.065869] forcedeth 0000:00:10.0: setting latency timer to 64
[ 1.071356] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.071408] ACPI: Power Button [PWRB]
[ 1.071547] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.071592] ACPI: Power Button [PWRF]
[ 1.076906] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[ 1.077002] ACPI: [Package] has zero elements (ffff88011a926280)
[ 1.077037] ACPI: Invalid passive threshold
[ 1.077269] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.077305] ACPI: Thermal Zone [THRM] (40 C)
[ 1.082921] ACPI: Fan [FAN] (on)
[ 1.091096] usbcore: registered new interface driver usbfs
[ 1.091164] usbcore: registered new interface driver hub
[ 1.108729] [drm] Initialized drm 1.1.0 20060810
[ 1.109067] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.109126] firewire_ohci 0000:02:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1.113471] wmi: Mapper loaded
[ 1.115619] usbcore: registered new device driver usb
[ 1.116410] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.118217] libata version 3.00 loaded.
[ 1.132587] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.166534] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 1.166579] nouveau 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 1.166626] nouveau 0000:01:00.0: setting latency timer to 64
[ 1.168726] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b200b1)
[ 1.170772] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 1.219256] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1.219294] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1.219329] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.50
[ 1.219366] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[ 1.219400] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[ 1.219444] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 1.219489] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 1.219525] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03000302 00000000
[ 1.219561] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 1.219597] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0c011312 00c00000
[ 1.219633] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 020223f1 0040c083
[ 1.219671] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 1.219708] [drm] nouveau 0000:01:00.0: 0: 0x00000030: type 0x30 idx 0 tag 0xff
[ 1.219751] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 1.219795] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 1.219839] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 1.219882] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 1.219930] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCDED
[ 1.220250] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD497
[ 1.232417] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDB92
[ 1.232475] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDD16
[ 1.235639] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDF22
[ 1.235741] firewire_ohci: Added fw-ohci device 0000:02:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.254572] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 1.254611] [drm] nouveau 0000:01:00.0: 0: core 400MHz shader 400MHz memory 333MHz voltage 1100mV fanspeed 100%
[ 1.254661] [drm] nouveau 0000:01:00.0: c: core 351MHz shader 351MHz memory 265MHz
[ 1.254872] [TTM] Zone kernel: Available graphics memory: 2030216 kiB.
[ 1.254908] [TTM] Initializing pool allocator.
[ 1.254954] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 1.257924] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1.258079] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 1.309431] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.309469] [drm] No driver support for vblank timestamp query.
[ 1.309515] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 1.309568] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1.309612] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[ 1.309661] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[ 1.309705] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
[ 1.496388] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ffff880117008400
[ 1.496890] fbcon: nouveaufb (fb0) is primary device
[ 1.510207] [drm] nouveau 0000:01:00.0: 0xC241: Parsing digital output script table
[ 1.559824] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 1.559827] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 1.560742] Console: switching to colour frame buffer device 128x48
[ 1.561644] fb0: nouveaufb frame buffer device
[ 1.561651] drm: registered panic notifier
[ 1.561661] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 1.588727] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:06:5d
[ 1.588750] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.589046] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20
[ 1.589071] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 20 (level, low) -> IRQ 20
[ 1.589085] forcedeth 0000:00:11.0: setting latency timer to 64
[ 1.736148] firewire_core: created device fw0: GUID 0011d80000c8637e, S400
[ 2.112771] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:08:8e
[ 2.112788] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.112883] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 2.112928] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[ 2.112938] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 2.112978] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 2.113014] ehci_hcd 0000:00:0a.1: debug port 1
[ 2.113026] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported
[ 2.113059] ehci_hcd 0000:00:0a.1: irq 22, io mem 0xfe02e000
[ 2.124033] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 2.124068] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.124396] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.124702] usb usb1: Product: EHCI Host Controller
[ 2.125002] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 2.125346] usb usb1: SerialNumber: 0000:00:0a.1
[ 2.125932] hub 1-0:1.0: USB hub found
[ 2.126229] hub 1-0:1.0: 10 ports detected
[ 2.126801] pata_amd 0000:00:0c.0: version 0.4.1
[ 2.128111] pata_amd 0000:00:0c.0: setting latency timer to 64
[ 2.128879] scsi0 : pata_amd
[ 2.129312] scsi1 : pata_amd
[ 2.130098] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 2.130398] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 2.130916] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 2.131268] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 2.131851] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[ 2.132193] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[ 2.190037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.190596] usb usb2: Product: OHCI Host Controller
[ 2.190861] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 2.191569] hub 2-0:1.0: USB hub found
[ 2.192373] sata_nv 0000:00:0d.0: version 3.5
[ 2.192832] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 2.193342] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 2.194004] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 2.195540] scsi3 : sata_nv
[ 2.195952] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 2.196749] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 2.196999] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 2.197907] sata_nv 0000:00:0d.1: setting latency timer to 64
[ 2.198583] scsi4 : sata_nv
[ 2.199317] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 2.199560] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
[ 2.200322] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 2.201234] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 2.201905] scsi6 : sata_nv
[ 2.202656] ata7: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 21
[ 2.292397] ata1.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[ 2.292663] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 2.308322] ata1.00: configured for UDMA/33
[ 2.314524] scsi 0:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
[ 2.315088] ata2: port disabled--ignoring
[ 2.512023] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.548027] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[ 2.664044] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.664048] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.672364] ata5.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 2.672633] ata5.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.680471] usb 1-3: New USB device found, idVendor=050d, idProduct=0234
[ 2.680737] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.681286] hub 1-3:1.0: USB hub found
[ 2.681722] hub 1-3:1.0: 4 ports detected
[ 2.688358] ata5.00: configured for UDMA/133
[ 2.688663] ata3.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 2.688950] ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.696262] ata3.00: configured for UDMA/133
[ 2.696707] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 2.984037] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[ 3.164048] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.188284] ata4.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 3.188578] ata4.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.196266] ata4.00: configured for UDMA/133
[ 3.196707] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 3.197248] scsi 4:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 3.198060] usb 2-1: New USB device found, idVendor=046d, idProduct=c00e
[ 3.198338] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.198607] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 3.198869] usb 2-1: Manufacturer: Logitech
[ 3.200301] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.200312] sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.200366] sd 3:0:0:0: [sdb] Write Protect is off
[ 3.200369] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.200392] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.200512] sd 4:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.200560] sd 4:0:0:0: [sdc] Write Protect is off
[ 3.200563] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.200584] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.203724] sd 2:0:0:0: [sda] Write Protect is off
[ 3.204044] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.204329] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.215167] sdb: sdb1 sdb2 sdb3 sdb4
[ 3.215967] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 3.222526] sdc: sdc1
[ 3.223143] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 3.271745] sda: sda1 sda2 sda3 sda4
[ 3.272485] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.504027] usb 2-2: new low-speed USB device number 3 using ohci_hcd
[ 3.664035] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.672359] ata6.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 3.672626] ata6.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.688343] ata6.00: configured for UDMA/133
[ 3.688755] scsi 5:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 3.689294] sd 5:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.689627] sd 5:0:0:0: [sdd] Write Protect is off
[ 3.689901] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.690188] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.711434] sdd: sdd1
[ 3.711968] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 3.723052] usb 2-2: New USB device found, idVendor=046d, idProduct=c30f
[ 3.723333] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.723613] usb 2-2: Product: Logitech USB Keyboard
[ 3.723889] usb 2-2: Manufacturer: Logitech
[ 4.156038] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.164169] ata8.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100
[ 4.180161] ata8.00: configured for UDMA/100
[ 4.181678] scsi 7:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB04 PQ: 0 ANSI: 5
[ 4.199059] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 4.199362] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.200542] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 4.203712] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.204412] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 4.209377] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input2
[ 4.210837] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-1/input0
[ 4.218613] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.0/input/input3
[ 4.219130] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:0a.0-2/input0
[ 4.234168] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.1/input/input4
[ 4.234580] generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:0a.0-2/input1
[ 4.235233] usbcore: registered new interface driver usbhid
[ 4.235546] usbhid: USB HID core driver
[ 4.582510] vga16fb: initializing
[ 4.583166] vga16fb: mapped to 0xffff8800000a0000
[ 4.583595] fb1: VGA16 VGA frame buffer device
[ 4.590079] device-mapper: uevent: version 1.0.3
[ 4.590646] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4.887622] md: raid1 personality registered for level 1
[ 4.906248] mdadm: sending ioctl 800c0910 to a partition!
[ 4.906569] mdadm: sending ioctl 800c0910 to a partition!
[ 4.906870] mdadm: sending ioctl 1261 to a partition!
[ 4.907161] mdadm: sending ioctl 1261 to a partition!
[ 4.907668] mdadm: sending ioctl 1261 to a partition!
[ 4.907956] mdadm: sending ioctl 1261 to a partition!
[ 4.908464] mdadm: sending ioctl 1261 to a partition!
[ 4.908743] mdadm: sending ioctl 1261 to a partition!
[ 4.909183] mdadm: sending ioctl 1261 to a partition!
[ 4.909454] mdadm: sending ioctl 1261 to a partition!
[ 4.944456] md: md0 stopped.
[ 4.947393] md: bind<sdb1>
[ 4.947952] md: bind<sda1>
[ 4.950266] bio: create slab <bio-1> at 1
[ 4.950673] md/raid1:md0: active with 2 out of 2 mirrors
[ 4.950992] md0: detected capacity change from 0 to 98566144
[ 4.953108] md0: unknown partition table
[ 4.980640] md: md1 stopped.
[ 4.982848] md: bind<sdb3>
[ 4.983345] md: bind<sda3>
[ 4.986568] md/raid1:md1: active with 2 out of 2 mirrors
[ 4.986874] md1: detected capacity change from 0 to 79998943232
[ 4.989091] md1: unknown partition table
[ 5.023058] md: md2 stopped.
[ 5.025311] md: bind<sdb4>
[ 5.025808] md: bind<sda4>
[ 5.029386] md/raid1:md2: active with 2 out of 2 mirrors
[ 5.029709] md2: detected capacity change from 0 to 237973733376
[ 5.039647] md2: unknown partition table
[ 5.108125] md: md3 stopped.
[ 5.111030] md: bind<sdd1>
[ 5.111555] md: bind<sdc1>
[ 5.113522] md/raid1:md3: active with 2 out of 2 mirrors
[ 5.113780] md3: detected capacity change from 0 to 2000395101184
[ 5.120761] md3: unknown partition table
[ 5.254412] PM: Starting manual resume from disk
[ 5.254652] PM: Hibernation image partition 8:2 present
[ 5.254869] PM: Looking for hibernation image.
[ 5.255356] PM: Image not found (code -22)
[ 5.255594] PM: Hibernation image not present or could not be loaded.
[ 5.262702] REISERFS (device md1): found reiserfs format "3.6" with standard journal
[ 5.262940] REISERFS (device md1): using ordered data mode
[ 5.263144] reiserfs: using flush barriers
[ 5.271400] REISERFS (device md1): journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.273066] REISERFS (device md1): checking transaction log (md1)
[ 19.090424] REISERFS (device md1): replayed 404 transactions in 14 seconds
[ 20.229981] REISERFS (device md1): Using r5 hash to sort names
[ 22.364408] udevd[499]: starting version 175
[ 23.297487] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 23.311410] scsi_verify_blk_ioctl: 342 callbacks suppressed
[ 23.311777] mdadm: sending ioctl 1261 to a partition!
[ 23.312146] mdadm: sending ioctl 1261 to a partition!
[ 23.313597] mdadm: sending ioctl 1261 to a partition!
[ 23.313947] mdadm: sending ioctl 1261 to a partition!
[ 23.314972] mdadm: sending ioctl 1261 to a partition!
[ 23.315320] mdadm: sending ioctl 1261 to a partition!
[ 23.361873] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 23.367354] EDAC MC: Ver: 2.1.0
[ 23.378864] MCE: In-kernel MCE decoding enabled.
[ 23.385778] AMD64 EDAC driver v3.4.0
[ 23.386186] EDAC amd64: DRAM ECC disabled.
[ 23.386522] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 23.386524] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 23.386526] (Note that use of the override may cause unknown side effects.)
[ 23.427387] ACPI: resource nForce2_smbus [io 0x1c00-0x1c3f] conflicts with ACPI region SM00 [io 0x1c00-0x1c05]
[ 23.427708] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.428088] i2c i2c-3: nForce2 SMBus adapter at 0x1c40
[ 23.564582] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.636571] udevd[566]: renamed network interface eth1 to eth2
[ 23.648542] udevd[564]: renamed network interface eth0 to eth1
[ 23.832577] parport_pc 00:08: reported by Plug and Play ACPI
[ 23.832965] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 24.232634] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 24.232960] snd_hda_intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 24.233261] hda_intel: msi for device 1043:81f6 set to 0
[ 24.233622] snd_hda_intel 0000:00:0e.1: setting latency timer to 64
[ 24.609388] mdadm: sending ioctl 800c0910 to a partition!
[ 24.609719] mdadm: sending ioctl 800c0910 to a partition!
[ 24.610014] mdadm: sending ioctl 1261 to a partition!
[ 24.610170] mdadm: sending ioctl 800c0910 to a partition!
[ 25.086828] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.1/input/input6
[ 28.305557] Adding 1951892k swap on /dev/sda2. Priority:5 extents:1 across:1951892k
[ 28.355943] Adding 1951892k swap on /dev/sdb2. Priority:5 extents:1 across:1951892k
[ 28.782468] reiserfs: enabling write barrier flush mode
[ 28.803321] scsi_verify_blk_ioctl: 768 callbacks suppressed
[ 28.803643] mdadm: sending ioctl 1261 to a partition!
[ 28.803932] mdadm: sending ioctl 1261 to a partition!
[ 28.916186] mdadm: sending ioctl 1261 to a partition!
[ 28.916504] mdadm: sending ioctl 1261 to a partition!
[ 28.964861] REISERFS (device md1): Removing [1491414 4726694 0x0 SD]..done
[ 28.973578] REISERFS (device md1): Removing [1491414 4717131 0x0 SD]..done
[ 29.008365] REISERFS (device md1): Removing [5044492 1009084 0x0 SD]..done
[ 29.014070] REISERFS (device md1): Removing [5044492 1009082 0x0 SD]..done
[ 30.196338] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 30.196576] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 30.302625] Bridge firewalling registered
[ 30.415074] it87: Found IT8716F chip at 0x290, revision 0
[ 30.415618] it87: VID is disabled (pins used for GPIO)
[ 30.416248] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x295-0x296]
[ 30.573005] netconsole: local port 6666
[ 30.573579] netconsole: local IP 172.16.0.3
[ 30.574613] netconsole: remote port 6666
[ 30.575120] netconsole: remote IP 172.16.0.13
[ 30.576170] netconsole: device eth1 not up yet, forcing it
[ 30.578088] forcedeth 0000:00:10.0: irq 46 for MSI/MSI-X
[ 34.589269] console [netcon0] enabled
[ 36.286203] mdadm: sending ioctl 1261 to a partition!
[ 36.286805] mdadm: sending ioctl 1261 to a partition!
[ 36.922275] mdadm: sending ioctl 1261 to a partition!
[ 36.922900] mdadm: sending ioctl 1261 to a partition!
[ 37.038079] mdadm: sending ioctl 1261 to a partition!
[ 37.038710] mdadm: sending ioctl 1261 to a partition!
[ 40.648032] eth1: no IPv6 routers present
[ 91.139737] mdadm: sending ioctl 1261 to a partition!
[ 91.140400] mdadm: sending ioctl 1261 to a partition!
[ 91.449709] kjournald starting. Commit interval 5 seconds
[ 91.472961] EXT3-fs (md0): using internal journal
[ 91.473524] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 91.474890] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[ 91.475510] REISERFS (device md2): using ordered data mode
[ 91.476093] reiserfs: using flush barriers
[ 91.492655] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 91.496293] REISERFS (device md2): checking transaction log (md2)
[ 91.602066] REISERFS (device md2): Using r5 hash to sort names
[ 91.635025] REISERFS (device md3): found reiserfs format "3.6" with standard journal
[ 91.635760] REISERFS (device md3): using ordered data mode
[ 91.636383] reiserfs: using flush barriers
[ 91.638194] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 91.641875] REISERFS (device md3): checking transaction log (md3)
[ 91.724895] REISERFS (device md3): Using r5 hash to sort names
[ 91.781149] REISERFS (device md3): Removing [195090 649782 0x0 SD]..done
[ 91.842323] REISERFS (device md3): Removing [573640 649751 0x0 SD]..done
[ 91.850407] REISERFS (device md3): Removing [195090 649749 0x0 SD]..done
[ 91.879238] REISERFS (device md3): Removing [197092 646243 0x0 SD]..done
[ 91.887311] REISERFS (device md3): Removing [573640 635632 0x0 SD]..done
[ 91.941296] REISERFS (device md3): Removing [197092 184937 0x0 SD]..done
[ 91.942070] REISERFS (device md3): There were 6 uncompleted unlinks/truncates. Completed
[ 94.466235] RPC: Registered named UNIX socket transport module.
[ 94.466883] RPC: Registered udp transport module.
[ 94.467846] RPC: Registered tcp transport module.
[ 94.468470] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 94.530952] FS-Cache: Loaded
[ 94.577886] FS-Cache: Netfs 'nfs' registered for caching
[ 94.603040] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 98.390230] fuse init (API version 7.17)
[ 101.939135] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X
[ 102.797470] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 105.666207] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 105.686619] [drm] nouveau 0000:01:00.0: 0xC24F: Parsing digital output script table
[ 105.736277] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 105.736290] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 108.895318] Bluetooth: Core ver 2.16
[ 108.895394] NET: Registered protocol family 31
[ 108.895413] Bluetooth: HCI device and connection manager initialized
[ 108.895425] Bluetooth: HCI socket layer initialized
[ 108.895433] Bluetooth: L2CAP socket layer initialized
[ 108.895988] Bluetooth: SCO socket layer initialized
[ 109.050361] Bluetooth: RFCOMM TTY layer initialized
[ 109.050410] Bluetooth: RFCOMM socket layer initialized
[ 109.050418] Bluetooth: RFCOMM ver 1.11
[ 109.062281] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 109.062306] Bluetooth: BNEP filters: protocol multicast
[ 112.448029] eth2: no IPv6 routers present
[ 112.781154] lp0: using parport0 (interrupt-driven).
[ 112.867021] ppdev: user-space parallel port driver
[ 131.900312] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 131.920368] [drm] nouveau 0000:01:00.0: 0xC241: Parsing digital output script table
[ 131.969984] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 131.969988] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 135.612165] postgres (6619): /proc/6619/oom_adj is deprecated, please use /proc/6619/oom_score_adj instead.
[ 143.324752] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 144.673065] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 145.967926] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 145.969116] NFSD: starting 90-second grace period
[ 311.928469] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 311.948553] [drm] nouveau 0000:01:00.0: 0xC24F: Parsing digital output script table
[ 311.998196] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 311.998208] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 1911.613543] general protection fault: 0000 [#1] SMP
[ 1911.613579] CPU 1
[ 1911.613585] Modules linked in: snd_hrtimer ip6table_filter ip6_tables iptable_filter ip_tables x_tables cpufreq_stats cpufreq_userspace cpufreq_conservative ppdev lp bnep rfcomm bluetooth rfkill crc16 binfmt_misc uinput fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext3 mbcache jbd netconsole configfs hwmon_vid wire cn bridge stp usblp sata_mv powernow_k8 mperf ahci libahci cpufreq_powersave sg aic79xx aic7xxx scsi_transport_spi msr cpuid aes_x86_64 aes_generic firewire_sbp2 loop dm_crypt snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq parport_pc parport psmouse shpchp snd_seq_device snd_timer i2c_nforce2 edac_mce_amd edac_core pcspkr serio_raw k8temp processor snd soundcore asus_atk0110 evdev reiserfs raid1 md_mod dm_mirror dm_region_hash dm_log dm_mod vga16fb vgastate usbhid hid sr_mod cdrom sd_mod crc_t10dif nouveau ata_generic sata_nv ohci_hcd pata_amd libata ehci_hcd video mxm_wmi wmi i2c_algo_bit drm_kms_helper ttm drm firewire_ohci fan thermal button firewire_core crc_itu_t scsi_mod usbcore forcedeth i2c_core thermal_sys usb_common [last unloaded: scsi_wait_scan]
[ 1911.614575]
[ 1911.614583] Pid: 3037, comm: Xorg Not tainted 3.2.0-2-amd64 #1 System manufacturer System Product Name/M2N32 WS Professional
[ 1911.614610] RIP: 0010:[<ffffffff81282e5a>] [<ffffffff81282e5a>] skb_drop_fraglist+0x1f/0x2e
[ 1911.614633] RSP: 0018:ffff8801124fdbf8 EFLAGS: 00010286
[ 1911.614643] RAX: ffff880039587e9a RBX: ffff8801177cd180 RCX: ffff8800321d4000
[ 1911.614656] RDX: ffff88003958401a RSI: 0000000000000016 RDI: 29a1d2c3f1ac0000
[ 1911.614668] RBP: 0000000000000000 R08: ffff8800321d4000 R09: ffff88004d0c0000
[ 1911.614681] R10: ffff88004d05c000 R11: ffff88004d05c000 R12: ffff8801177cd180
[ 1911.614693] R13: 0000000000036b00 R14: ffff8801124fdd50 R15: 0000000000000000
[ 1911.614706] FS: 00007ff1ded50880(0000) GS:ffff88011fc80000(0000) knlGS:00000000f2800b70
[ 1911.614721] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1911.614732] CR2: 00007ff1d01d6000 CR3: 000000011878d000 CR4: 00000000000006e0
[ 1911.614744] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1911.614757] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1911.614769] Process Xorg (pid: 3037, threadinfo ffff8801124fc000, task ffff880115b9c9b0)
[ 1911.614782] Stack:
[ 1911.614788] ffff8801177cd180 ffffffff81282b25 0000000000000000 ffff8801177cd180
[ 1911.614816] ffff880118c50a40 ffffffff81282b49 ffff8801124fdd88 ffffffff812f4ceb
[ 1911.614842] ffff880090bba400 ffffffff81037d6e ffffffff81036457 ffff8801124fdce0
[ 1911.614869] Call Trace:
[ 1911.614879] [<ffffffff81282b25>] ? skb_release_data+0xa4/0xb7
[ 1911.614892] [<ffffffff81282b49>] ? __kfree_skb+0x11/0x77
[ 1911.614913] [<ffffffff812f4ceb>] ? unix_stream_recvmsg+0x47f/0x511
[ 1911.614927] [<ffffffff81037d6e>] ? __wake_up+0x35/0x46
[ 1911.614938] [<ffffffff81036457>] ? should_resched+0x5/0x23
[ 1911.614978] [<ffffffffa02d720a>] ? __nouveau_fence_unref+0x1c/0x25 [nouveau]
[ 1911.614993] [<ffffffff8127c075>] ? sock_aio_read.part.9+0x113/0x127
[ 1911.615017] [<ffffffffa02d7c51>] ? drm_gem_object_unreference_unlocked+0x2b/0x3b [nouveau]
[ 1911.615045] [<ffffffffa02d91c6>] ? nouveau_gem_ioctl_cpu_prep+0x6c/0x79 [nouveau]
[ 1911.615060] [<ffffffff810f8e7a>] ? do_sync_read+0xab/0xe3
[ 1911.615072] [<ffffffff810f956c>] ? vfs_read+0xa6/0xe6
[ 1911.615083] [<ffffffff810f95f1>] ? sys_read+0x45/0x6b
[ 1911.615095] [<ffffffff8134f3d2>] ? system_call_fastpath+0x16/0x1b
[ 1911.615106] Code: e8 80 e2 ff [ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.20-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-7) ) #1 SMP Mon Jun 11 17:24:18 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfeb0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfeb0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2N32 WS Professional, BIOS ASUS M2N32 WS Pro ACPI BIOS Revision 2001 05/05/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00C0000000 mask FFE0000000 write-back
[ 0.000000] 3 base 00DFF00000 mask FFFFF00000 uncachable
[ 0.000000] 4 base 0100000000 mask FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000120000000 aka 4608M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000dff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xdfeb0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6040] f6040
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfeb0000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfeb0000 page 4k
[ 0.000000] kernel direct mapping tables up to dfeb0000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ dfeaa000-dfeb0000
[ 0.000000] RAMDISK: 36152000 - 370a1000
[ 0.000000] ACPI: RSDP 00000000000f7f20 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000dfee3100 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000dfeeb480 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000dfee3280 08189 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000dfeb0000 00040
[ 0.000000] ACPI: TCPA 00000000dfeeb6c0 00032 (v01 HTC HTCACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000dfeeb740 00206 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: MCFG 00000000dfeeba40 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000dfeeb5c0 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b600000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfeb0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048127
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 898792 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfeb0000 - 00000000dfee3000
[ 0.000000] PM: Registered nosave memory: 00000000dfee3000 - 00000000dfef0000
[ 0.000000] PM: Registered nosave memory: 00000000dfef0000 - 00000000dff00000
[ 0.000000] PM: Registered nosave memory: 00000000dff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82304 r8192 d24192 u524288
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031994
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=be87a827-5a79-49a1-be52-d550dc549c0e ro apic debug ignore_loglevel
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ d4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000
[ 0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000
[ 0.000000] Memory: 3976876k/4718592k available (3407k kernel code, 526084k absent, 215632k reserved, 3326k data, 572k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2210.149 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004038] Calibrating delay loop (skipped), value calculated using timer frequency.. 4420.29 BogoMIPS (lpj=8840596)
[ 0.004107] pid_max: default: 32768 minimum: 301
[ 0.004198] Security Framework initialized
[ 0.004234] AppArmor: AppArmor disabled by boot time parameter
[ 0.008386] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010982] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012367] Mount-cache hash table entries: 256
[ 0.012567] Initializing cgroup subsys cpuacct
[ 0.012604] Initializing cgroup subsys memory
[ 0.012652] Initializing cgroup subsys devices
[ 0.012686] Initializing cgroup subsys freezer
[ 0.012721] Initializing cgroup subsys net_cls
[ 0.012755] Initializing cgroup subsys blkio
[ 0.012797] Initializing cgroup subsys perf_event
[ 0.012862] tseg: 00dff00000
[ 0.012895] CPU: Physical Processor ID: 0
[ 0.012928] CPU: Processor Core ID: 0
[ 0.012961] mce: CPU supports 5 MCE banks
[ 0.013001] using AMD E400 aware idle routine
[ 0.013366] ACPI: Core revision 20110623
[ 0.020495] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.060237] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 0.064003] Performance Events: AMD PMU driver.
[ 0.064003] ... version: 0
[ 0.064003] ... bit width: 48
[ 0.064003] ... generic registers: 4
[ 0.064003] ... value mask: 0000ffffffffffff
[ 0.064003] ... max period: 00007fffffffffff
[ 0.064003] ... fixed-purpose events: 0
[ 0.064003] ... event mask: 000000000000000f
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9a000
[ 0.152083] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152140] Brought up 2 CPUs
[ 0.152173] Total of 2 processors activated (8840.69 BogoMIPS).
[ 0.152711] devtmpfs: initialized
[ 0.156264] PM: Registering ACPI NVS region at dfeb0000 (208896 bytes)
[ 0.156264] print_constraints: dummy:
[ 0.156359] NET: Registered protocol family 16
[ 0.156520] node 0 link 0: io port [a000, ffff]
[ 0.156555] TOM: 00000000e0000000 aka 3584M
[ 0.156589] node 0 link 0: mmio [a0000, bffff]
[ 0.156644] node 0 link 0: mmio [e0000000, efffffff]
[ 0.156700] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.156755] node 0 link 0: mmio [f0000000, f09fffff]
[ 0.156810] TOM2: 0000000120000000 aka 4608M
[ 0.156844] bus: [00, 09] on node 0 link 0
[ 0.156878] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.156912] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.156946] bus: 00 index 2 [mem 0xe0000000-0xf3ffffff]
[ 0.156980] bus: 00 index 3 [mem 0xf4000000-0xffffffff]
[ 0.157014] bus: 00 index 4 [mem 0x120000000-0xfcffffffff]
[ 0.157057] ACPI: bus type pci registered
[ 0.157170] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.157216] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.164035] PCI: Using configuration type 1 for base access
[ 0.164918] bio: create slab <bio-0> at 0
[ 0.164918] ACPI: Added _OSI(Module Device)
[ 0.164918] ACPI: Added _OSI(Processor Device)
[ 0.164918] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.164918] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.165416] ACPI: EC: Look up EC in DSDT
[ 0.174237] ACPI: Interpreter enabled
[ 0.174279] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.174444] ACPI: Using IOAPIC for interrupt routing
[ 0.182312] ACPI: No dock devices found.
[ 0.182348] HEST: Table not found.
[ 0.182384] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.182500] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.182685] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.182722] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.182758] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.182801] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.182844] pci_root PNP0A08:00: host bridge window [io 0x4700-0x470c]
[ 0.182880] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.182923] pci_root PNP0A08:00: host bridge window [mem 0xdff00000-0xfebfffff]
[ 0.182967] pci_root PNP0A08:00: host bridge window expanded to [io 0x0d00-0xffff]; [io 0x4700-0x470c] ignored
[ 0.183026] pci 0000:00:00.0: [10de:02f4] type 0 class 0x000500
[ 0.183103] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.183166] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.183235] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.183305] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.183374] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.183439] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.183499] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.183573] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.183632] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.183668] pci 0000:00:04.0: PME# disabled
[ 0.183731] pci 0000:00:08.0: [10de:0369] type 0 class 0x000500
[ 0.183946] pci 0000:00:09.0: [10de:0360] type 0 class 0x000601
[ 0.184016] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.184069] pci 0000:00:09.1: [10de:0368] type 0 class 0x000c05
[ 0.184130] pci 0000:00:09.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.184169] pci 0000:00:09.1: reg 24: [io 0x1c40-0x1c7f]
[ 0.184234] pci 0000:00:09.1: PME# supported from D3hot D3cold
[ 0.184272] pci 0000:00:09.1: PME# disabled
[ 0.184324] pci 0000:00:0a.0: [10de:036c] type 0 class 0x000c03
[ 0.184366] pci 0000:00:0a.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
[ 0.184434] pci 0000:00:0a.0: supports D1 D2
[ 0.184468] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184505] pci 0000:00:0a.0: PME# disabled
[ 0.184551] pci 0000:00:0a.1: [10de:036d] type 0 class 0x000c03
[ 0.184593] pci 0000:00:0a.1: reg 10: [mem 0xfe02e000-0xfe02e0ff]
[ 0.184662] pci 0000:00:0a.1: supports D1 D2
[ 0.184696] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184732] pci 0000:00:0a.1: PME# disabled
[ 0.184783] pci 0000:00:0c.0: [10de:036e] type 0 class 0x000101
[ 0.184835] pci 0000:00:0c.0: reg 20: [io 0xf400-0xf40f]
[ 0.184899] pci 0000:00:0d.0: [10de:037f] type 0 class 0x000101
[ 0.184942] pci 0000:00:0d.0: reg 10: [io 0x09f0-0x09f7]
[ 0.184979] pci 0000:00:0d.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.185016] pci 0000:00:0d.0: reg 18: [io 0x0970-0x0977]
[ 0.185054] pci 0000:00:0d.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.185091] pci 0000:00:0d.0: reg 20: [io 0xe000-0xe00f]
[ 0.185128] pci 0000:00:0d.0: reg 24: [mem 0xfe02d000-0xfe02dfff]
[ 0.185198] pci 0000:00:0d.1: [10de:037f] type 0 class 0x000101
[ 0.185241] pci 0000:00:0d.1: reg 10: [io 0x09e0-0x09e7]
[ 0.185278] pci 0000:00:0d.1: reg 14: [io 0x0be0-0x0be3]
[ 0.185315] pci 0000:00:0d.1: reg 18: [io 0x0960-0x0967]
[ 0.185353] pci 0000:00:0d.1: reg 1c: [io 0x0b60-0x0b63]
[ 0.185390] pci 0000:00:0d.1: reg 20: [io 0xcc00-0xcc0f]
[ 0.185428] pci 0000:00:0d.1: reg 24: [mem 0xfe02c000-0xfe02cfff]
[ 0.185497] pci 0000:00:0d.2: [10de:037f] type 0 class 0x000101
[ 0.185540] pci 0000:00:0d.2: reg 10: [io 0xc800-0xc807]
[ 0.185578] pci 0000:00:0d.2: reg 14: [io 0xc400-0xc403]
[ 0.185615] pci 0000:00:0d.2: reg 18: [io 0xc000-0xc007]
[ 0.185653] pci 0000:00:0d.2: reg 1c: [io 0xbc00-0xbc03]
[ 0.185690] pci 0000:00:0d.2: reg 20: [io 0xb800-0xb80f]
[ 0.185728] pci 0000:00:0d.2: reg 24: [mem 0xfe02b000-0xfe02bfff]
[ 0.185801] pci 0000:00:0e.0: [10de:0370] type 1 class 0x000604
[ 0.185874] pci 0000:00:0e.1: [10de:0371] type 0 class 0x000403
[ 0.185918] pci 0000:00:0e.1: reg 10: [mem 0xfe020000-0xfe023fff]
[ 0.185993] pci 0000:00:0e.1: PME# supported from D3hot D3cold
[ 0.186029] pci 0000:00:0e.1: PME# disabled
[ 0.186086] pci 0000:00:10.0: [10de:0373] type 0 class 0x000680
[ 0.186132] pci 0000:00:10.0: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.186170] pci 0000:00:10.0: reg 14: [io 0xb400-0xb407]
[ 0.186207] pci 0000:00:10.0: reg 18: [mem 0xfe029000-0xfe0290ff]
[ 0.186245] pci 0000:00:10.0: reg 1c: [mem 0xfe028000-0xfe02800f]
[ 0.186315] pci 0000:00:10.0: supports D1 D2
[ 0.186348] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.186386] pci 0000:00:10.0: PME# disabled
[ 0.186438] pci 0000:00:11.0: [10de:0373] type 0 class 0x000680
[ 0.186483] pci 0000:00:11.0: reg 10: [mem 0xfe027000-0xfe027fff]
[ 0.186521] pci 0000:00:11.0: reg 14: [io 0xb000-0xb007]
[ 0.186558] pci 0000:00:11.0: reg 18: [mem 0xfe026000-0xfe0260ff]
[ 0.186596] pci 0000:00:11.0: reg 1c: [mem 0xfe025000-0xfe02500f]
[ 0.186666] pci 0000:00:11.0: supports D1 D2
[ 0.186699] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.186737] pci 0000:00:11.0: PME# disabled
[ 0.186787] pci 0000:00:12.0: [10de:0376] type 1 class 0x000604
[ 0.186853] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.186889] pci 0000:00:12.0: PME# disabled
[ 0.186940] pci 0000:00:14.0: [10de:0374] type 1 class 0x000604
[ 0.187007] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187043] pci 0000:00:14.0: PME# disabled
[ 0.187093] pci 0000:00:15.0: [10de:0378] type 1 class 0x000604
[ 0.187159] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187196] pci 0000:00:15.0: PME# disabled
[ 0.187245] pci 0000:00:16.0: [10de:0375] type 1 class 0x000604
[ 0.187312] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187348] pci 0000:00:16.0: PME# disabled
[ 0.187398] pci 0000:00:17.0: [10de:0377] type 1 class 0x000604
[ 0.187464] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.187500] pci 0000:00:17.0: PME# disabled
[ 0.187545] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.187599] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.187649] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.187699] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.187784] pci 0000:01:00.0: [10de:0392] type 0 class 0x000300
[ 0.187825] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.187866] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.187907] pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
[ 0.187946] pci 0000:01:00.0: reg 24: [io 0xac00-0xac7f]
[ 0.187984] pci 0000:01:00.0: reg 30: [mem 0xfcfe0000-0xfcffffff pref]
[ 0.188039] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.188089] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.188125] pci 0000:00:04.0: bridge window [io 0xa000-0xafff]
[ 0.188160] pci 0000:00:04.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.188198] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188278] pci 0000:02:0b.0: [104c:8023] type 0 class 0x000c00
[ 0.188323] pci 0000:02:0b.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.188363] pci 0000:02:0b.0: reg 14: [mem 0xfdff8000-0xfdffbfff]
[ 0.188442] pci 0000:02:0b.0: supports D1 D2
[ 0.188475] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.188511] pci 0000:02:0b.0: PME# disabled
[ 0.188564] pci 0000:00:0e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.188601] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.188638] pci 0000:00:0e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.188682] pci 0000:00:0e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.188727] pci 0000:00:0e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.188771] pci 0000:00:0e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.191992] pci 0000:00:0e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.192014] pci 0000:00:0e.0: bridge window [mem 0xdff00000-0xfebfffff] (subtractive decode)
[ 0.192096] pci 0000:03:00.0: [1033:0125] type 1 class 0x000604
[ 0.192205] pci 0000:03:00.0: supports D1
[ 0.192238] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.192276] pci 0000:03:00.0: PME# disabled
[ 0.192335] pci 0000:03:00.1: [1033:0125] type 1 class 0x000604
[ 0.192387] pci 0000:03:00.1: reg 10: [mem 0xfdeff000-0xfdeff07f 64bit]
[ 0.192490] pci 0000:03:00.1: supports D1
[ 0.192523] pci 0000:03:00.1: PME# supported from D0 D1 D3hot D3cold
[ 0.192560] pci 0000:03:00.1: PME# disabled
[ 0.192616] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.192669] pci 0000:00:12.0: PCI bridge to [bus 03-05]
[ 0.192706] pci 0000:00:12.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.192812] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[ 0.192937] pci 0000:03:00.1: PCI bridge to [bus 05-05]
[ 0.193018] pci 0000:00:14.0: PCI bridge to [bus 06-06]
[ 0.193080] pci 0000:00:15.0: PCI bridge to [bus 07-07]
[ 0.193141] pci 0000:00:16.0: PCI bridge to [bus 08-08]
[ 0.193203] pci 0000:00:17.0: PCI bridge to [bus 09-09]
[ 0.193254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.193654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.193911] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.193947] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.193991] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.242373] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.242705] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243032] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.243362] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15)
[ 0.243640] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
[ 0.243917] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.244236] ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
[ 0.244512] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.244839] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.245165] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.245493] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.245771] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 *11 14 15)
[ 0.246049] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
[ 0.246325] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.246652] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.246981] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.247308] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.247636] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.247914] ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
[ 0.248205] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 0.248533] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.248767] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.249002] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.249235] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.249446] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 0.249657] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.249890] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.250102] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.250335] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.250633] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.250908] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[ 0.251183] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.251480] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.251757] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.252077] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.252374] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.252671] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.252970] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.253245] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.253521] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.253830] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.253830] vgaarb: loaded
[ 0.253830] vgaarb: bridge control possible 0000:01:00.0
[ 0.253830] PCI: Using ACPI for IRQ routing
[ 0.253830] PCI: pci_cache_line_size set to 64 bytes
[ 0.253830] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.253830] reserve RAM buffer: 00000000dfeb0000 - 00000000dfffffff
[ 0.258226] pnp: PnP ACPI init
[ 0.258310] ACPI: bus type pnp registered
[ 0.258483] pnp 00:00: [bus 00-ff]
[ 0.258516] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.258550] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.258584] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.258618] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.258653] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.258687] pnp 00:00: [io 0x4700-0x470c window]
[ 0.258722] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.258757] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.258885] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.258951] pnp 00:01: [io 0x1000-0x107f]
[ 0.258984] pnp 00:01: [io 0x1080-0x10ff]
[ 0.259018] pnp 00:01: [io 0x1400-0x147f]
[ 0.259051] pnp 00:01: [io 0x1480-0x14ff]
[ 0.259085] pnp 00:01: [io 0x1800-0x187f]
[ 0.259120] pnp 00:01: [io 0x1880-0x18ff]
[ 0.259246] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.259283] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 0.259318] system 00:01: [io 0x1400-0x147f] has been reserved
[ 0.259354] system 00:01: [io 0x1480-0x14ff] has been reserved
[ 0.259390] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.259425] system 00:01: [io 0x1880-0x18ff] has been reserved
[ 0.259461] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.259575] pnp 00:02: [io 0x0010-0x001f]
[ 0.259610] pnp 00:02: [io 0x0022-0x003f]
[ 0.259643] pnp 00:02: [io 0x0044-0x004d]
[ 0.259676] pnp 00:02: [io 0x0050-0x005f]
[ 0.259710] pnp 00:02: [io 0x0062-0x0063]
[ 0.259743] pnp 00:02: [io 0x0065-0x006f]
[ 0.259776] pnp 00:02: [io 0x0074-0x007f]
[ 0.259810] pnp 00:02: [io 0x0091-0x0093]
[ 0.259843] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.259876] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.259910] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.259943] pnp 00:02: [io 0x0800-0x087f]
[ 0.259976] pnp 00:02: [io 0x0290-0x0297]
[ 0.260115] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.260152] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.260187] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.260223] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.260273] pnp 00:03: [dma 4]
[ 0.260306] pnp 00:03: [io 0x0000-0x000f]
[ 0.260339] pnp 00:03: [io 0x0080-0x0090]
[ 0.260372] pnp 00:03: [io 0x0094-0x009f]
[ 0.260406] pnp 00:03: [io 0x00c0-0x00df]
[ 0.260478] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.260576] pnp 00:04: [io 0x0070-0x0073]
[ 0.260621] pnp 00:04: [irq 8]
[ 0.260695] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.260740] pnp 00:05: [io 0x0061]
[ 0.260812] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.260857] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.260897] pnp 00:06: [irq 13]
[ 0.260972] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.261347] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.261387] pnp 00:07: [irq 4]
[ 0.261502] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.262062] pnp 00:08: [io 0x0378-0x037f]
[ 0.262096] pnp 00:08: [io 0x0778-0x077b]
[ 0.262135] pnp 00:08: [irq 7]
[ 0.262168] pnp 00:08: [dma 3]
[ 0.262276] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.263126] pnp 00:09: [mem 0xf0000000-0xf3ffffff]
[ 0.263257] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.263294] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.263490] pnp 00:0a: [mem 0x000cde00-0x000cffff]
[ 0.263525] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[ 0.263559] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[ 0.263593] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[ 0.263627] pnp 00:0a: [mem 0xfefff000-0xfefff0ff]
[ 0.263661] pnp 00:0a: [mem 0xdfeb0000-0xdfefffff]
[ 0.263695] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 0.263729] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.263763] pnp 00:0a: [mem 0x00100000-0xdfeaffff]
[ 0.263797] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.263832] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.263867] pnp 00:0a: [mem 0xfefff000-0xfeffffff]
[ 0.263901] pnp 00:0a: [mem 0xfff80000-0xfff80fff]
[ 0.263935] pnp 00:0a: [mem 0xfff90000-0xfffbffff]
[ 0.263969] pnp 00:0a: [mem 0xfffed000-0xfffeffff]
[ 0.264127] system 00:0a: [mem 0x000cde00-0x000cffff] has been reserved
[ 0.264164] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.264201] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.264238] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.264275] system 00:0a: [mem 0xfefff000-0xfefff0ff] has been reserved
[ 0.264311] system 00:0a: [mem 0xdfeb0000-0xdfefffff] could not be reserved
[ 0.264348] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.264385] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.264421] system 00:0a: [mem 0x00100000-0xdfeaffff] could not be reserved
[ 0.267632] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.267669] system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.267706] system 00:0a: [mem 0xfefff000-0xfeffffff] could not be reserved
[ 0.267742] system 00:0a: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.267779] system 00:0a: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.267815] system 00:0a: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.267852] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.267897] pnp: PnP ACPI: found 11 devices
[ 0.267930] ACPI: ACPI bus type pnp unregistered
[ 0.275073] Switching to clocksource acpi_pm
[ 0.275151] PCI: max bus depth: 2 pci_try_num: 3
[ 0.275235] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.275270] pci 0000:00:04.0: bridge window [io 0xa000-0xafff]
[ 0.275306] pci 0000:00:04.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.275343] pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.275388] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
[ 0.275423] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.275462] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[ 0.275507] pci 0000:03:00.1: PCI bridge to [bus 05-05]
[ 0.275553] pci 0000:00:12.0: PCI bridge to [bus 03-05]
[ 0.275588] pci 0000:00:12.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.275626] pci 0000:00:14.0: PCI bridge to [bus 06-06]
[ 0.275664] pci 0000:00:15.0: PCI bridge to [bus 07-07]
[ 0.275702] pci 0000:00:16.0: PCI bridge to [bus 08-08]
[ 0.275739] pci 0000:00:17.0: PCI bridge to [bus 09-09]
[ 0.275782] pci 0000:00:04.0: setting latency timer to 64
[ 0.275818] pci 0000:00:0e.0: setting latency timer to 64
[ 0.275856] pci 0000:00:12.0: setting latency timer to 64
[ 0.275897] pci 0000:03:00.0: setting latency timer to 64
[ 0.275897] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.275897] pci 0000:03:00.1: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.275897] pci 0000:03:00.1: setting latency timer to 64
[ 0.275897] pci 0000:00:14.0: setting latency timer to 64
[ 0.275897] pci 0000:00:15.0: setting latency timer to 64
[ 0.275897] pci 0000:00:16.0: setting latency timer to 64
[ 0.275897] pci 0000:00:17.0: setting latency timer to 64
[ 0.275897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.275897] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.275897] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.275897] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.275897] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.275897] pci_bus 0000:00: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.275897] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.275897] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.275897] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.275897] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.275897] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.275897] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.275897] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.275897] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.275897] pci_bus 0000:02: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.275897] pci_bus 0000:02: resource 9 [mem 0xdff00000-0xfebfffff]
[ 0.275897] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.275897] NET: Registered protocol family 2
[ 0.275897] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.276246] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.281298] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.281924] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.281961] TCP reno registered
[ 0.282007] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.282094] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.282310] NET: Registered protocol family 1
[ 0.282394] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.282687] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.282737] pci 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 0.352039] pci 0000:00:0a.0: PCI INT A disabled
[ 0.352299] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.352351] pci 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 0.352421] pci 0000:00:0a.1: PCI INT B disabled
[ 0.352505] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.352582] pci 0000:00:0d.1: Enabling HT MSI Mapping
[ 0.352660] pci 0000:00:0d.2: Enabling HT MSI Mapping
[ 0.352737] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.352819] pci 0000:00:0e.1: Enabling HT MSI Mapping
[ 0.352910] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 0.353007] pci 0000:00:11.0: Enabling HT MSI Mapping
[ 0.353106] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 0.353211] pci 0000:00:14.0: Enabling HT MSI Mapping
[ 0.353322] pci 0000:00:15.0: Enabling HT MSI Mapping
[ 0.353437] pci 0000:00:16.0: Enabling HT MSI Mapping
[ 0.353558] pci 0000:00:17.0: Enabling HT MSI Mapping
[ 0.353610] pci 0000:01:00.0: Boot video device
[ 0.353652] PCI: CLS 32 bytes, default 64
[ 0.353751] Unpacking initramfs...
[ 0.749916] Freeing initrd memory: 15676k freed
[ 0.760902] PCI-DMA: Disabling AGP.
[ 0.761031] PCI-DMA: aperture base @ d4000000 size 65536 KB
[ 0.761066] PCI-DMA: using GART IOMMU.
[ 0.761101] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.765511] audit: initializing netlink socket (disabled)
[ 0.765565] type=2000 audit(1341749984.764:1): initialized
[ 0.793955] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.819890] VFS: Disk quotas dquot_6.5.2
[ 0.819966] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.820104] msgmni has been set to 7926
[ 0.820355] alg: No test for stdrng (krng)
[ 0.820445] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.820493] io scheduler noop registered
[ 0.820525] io scheduler deadline registered
[ 0.820579] io scheduler cfq registered (default)
[ 0.820800] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.820861] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
[ 0.820999] pcieport 0000:00:12.0: setting latency timer to 64
[ 0.821058] pcieport 0000:00:12.0: irq 41 for MSI/MSI-X
[ 0.821181] pcieport 0000:00:14.0: setting latency timer to 64
[ 0.821237] pcieport 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.821359] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.821415] pcieport 0000:00:15.0: irq 43 for MSI/MSI-X
[ 0.821537] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.821593] pcieport 0000:00:16.0: irq 44 for MSI/MSI-X
[ 0.821716] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.821772] pcieport 0000:00:17.0: irq 45 for MSI/MSI-X
[ 0.822009] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.822078] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.822114] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.822684] ERST: Table is not found!
[ 0.822717] GHES: HEST is not enabled!
[ 0.822826] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.843238] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.920572] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.936266] Linux agpgart interface v0.103
[ 0.936447] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.936895] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.936934] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.937149] mousedev: PS/2 mouse device common for all mice
[ 0.937241] rtc_cmos 00:04: RTC can wake from S4
[ 0.937423] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.937489] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.937536] cpuidle: using governor ladder
[ 0.937569] cpuidle: using governor menu
[ 0.937823] TCP cubic registered
[ 0.937923] NET: Registered protocol family 10
[ 0.938509] Mobile IPv6
[ 0.938542] NET: Registered protocol family 17
[ 0.938578] Registering the dns_resolver key type
[ 0.938822] PM: Hibernation image not present or could not be loaded.
[ 0.938868] registered taskstats version 1
[ 0.952192] rtc_cmos 00:04: setting system clock to 2012-07-08 12:19:45 UTC (1341749985)
[ 0.952289] Initializing network drop monitor service
[ 0.953832] Freeing unused kernel memory: 572k freed
[ 0.954106] Write protecting the kernel read-only data: 6144k
[ 0.957355] Freeing unused kernel memory: 672k freed
[ 0.961162] Freeing unused kernel memory: 684k freed
[ 0.986046] udevd[96]: starting version 175
[ 1.059702] usbcore: registered new interface driver usbfs
[ 1.059786] usbcore: registered new interface driver hub
[ 1.067633] SCSI subsystem initialized
[ 1.068448] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.068500] ACPI: Power Button [PWRB]
[ 1.068633] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.068678] ACPI: Power Button [PWRF]
[ 1.074085] usbcore: registered new device driver usb
[ 1.074766] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.082440] ACPI: Fan [FAN] (on)
[ 1.083183] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.083357] libata version 3.00 loaded.
[ 1.083459] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 1.083515] forcedeth 0000:00:10.0: PCI INT A -> Link[APCH] -> GSI 21 (level, low) -> IRQ 21
[ 1.083562] forcedeth 0000:00:10.0: setting latency timer to 64
[ 1.086818] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[ 1.086918] ACPI: [Package] has zero elements (ffff880116fc8a40)
[ 1.086953] ACPI: Invalid passive threshold
[ 1.087195] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.087230] ACPI: Thermal Zone [THRM] (40 C)
[ 1.091694] [drm] Initialized drm 1.1.0 20060810
[ 1.098739] wmi: Mapper loaded
[ 1.100281] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 1.100344] firewire_ohci 0000:02:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 1.112575] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.151378] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 1.151426] nouveau 0000:01:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 1.151472] nouveau 0000:01:00.0: setting latency timer to 64
[ 1.153611] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x04b200b1)
[ 1.155258] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 1.203565] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 1.203603] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 1.203639] [drm] nouveau 0000:01:00.0: Bios version 05.73.22.50
[ 1.203675] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[ 1.203710] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[ 1.203753] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 1.203798] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 1.203835] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 03000302 00000000
[ 1.203871] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 1.203907] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0c011312 00c00000
[ 1.203943] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 020223f1 0040c083
[ 1.203980] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 1.204039] [drm] nouveau 0000:01:00.0: 0: 0x00000030: type 0x30 idx 0 tag 0xff
[ 1.204083] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 1.204126] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 1.204170] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 1.204214] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 1.204261] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCDED
[ 1.204557] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD497
[ 1.216725] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDB92
[ 1.216783] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDD16
[ 1.219947] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDF22
[ 1.238737] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 1.238775] [drm] nouveau 0000:01:00.0: 0: core 400MHz shader 400MHz memory 333MHz voltage 1100mV fanspeed 100%
[ 1.238826] [drm] nouveau 0000:01:00.0: c: core 351MHz shader 351MHz memory 265MHz
[ 1.239025] [TTM] Zone kernel: Available graphics memory: 2030216 kiB.
[ 1.239060] [TTM] Initializing pool allocator.
[ 1.239107] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 1.242081] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 1.242235] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 1.290813] firewire_ohci: Added fw-ohci device 0000:02:0b.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.293478] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.293515] [drm] No driver support for vblank timestamp query.
[ 1.293560] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 1.293616] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1.293661] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 2)
[ 1.293712] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[ 1.293756] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 4)
[ 1.480391] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x49000, bo ffff8801177ca000
[ 1.480893] fbcon: nouveaufb (fb0) is primary device
[ 1.494204] [drm] nouveau 0000:01:00.0: 0xC241: Parsing digital output script table
[ 1.543825] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 1.543828] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 1.544744] Console: switching to colour frame buffer device 128x48
[ 1.545647] fb0: nouveaufb frame buffer device
[ 1.545654] drm: registered panic notifier
[ 1.545665] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 1.608745] forcedeth 0000:00:10.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:06:5d
[ 1.608767] forcedeth 0000:00:10.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.609075] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 20
[ 1.609100] forcedeth 0000:00:11.0: PCI INT A -> Link[AMC1] -> GSI 20 (level, low) -> IRQ 20
[ 1.609114] forcedeth 0000:00:11.0: setting latency timer to 64
[ 1.812184] firewire_core: created device fw0: GUID 0011d80000c8637e, S400
[ 2.132768] forcedeth 0000:00:11.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:2d:08:8e
[ 2.132784] forcedeth 0000:00:11.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 2.132883] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 2.132928] ehci_hcd 0000:00:0a.1: setting latency timer to 64
[ 2.132939] ehci_hcd 0000:00:0a.1: EHCI Host Controller
[ 2.132978] ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
[ 2.133015] ehci_hcd 0000:00:0a.1: debug port 1
[ 2.133027] ehci_hcd 0000:00:0a.1: cache line size of 32 is not supported
[ 2.133236] ehci_hcd 0000:00:0a.1: irq 22, io mem 0xfe02e000
[ 2.144031] ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00
[ 2.144069] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.144404] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.144721] usb usb1: Product: EHCI Host Controller
[ 2.145030] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 2.145348] usb usb1: SerialNumber: 0000:00:0a.1
[ 2.145938] hub 1-0:1.0: USB hub found
[ 2.146255] hub 1-0:1.0: 10 ports detected
[ 2.146841] sata_nv 0000:00:0d.0: version 3.5
[ 2.148129] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 2.148461] sata_nv 0000:00:0d.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 2.148764] sata_nv 0000:00:0d.0: Using SWNCQ mode
[ 2.149504] sata_nv 0000:00:0d.0: setting latency timer to 64
[ 2.150534] scsi0 : sata_nv
[ 2.150972] scsi1 : sata_nv
[ 2.151415] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 23
[ 2.151710] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 23
[ 2.152294] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[ 2.152580] sata_nv 0000:00:0d.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 2.152863] sata_nv 0000:00:0d.1: Using SWNCQ mode
[ 2.153553] sata_nv 0000:00:0d.1: setting latency timer to 64
[ 2.154233] scsi2 : sata_nv
[ 2.154625] scsi3 : sata_nv
[ 2.155043] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 2.155322] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
[ 2.155866] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
[ 2.156165] sata_nv 0000:00:0d.2: PCI INT C -> Link[ASA2] -> GSI 21 (level, low) -> IRQ 21
[ 2.156433] sata_nv 0000:00:0d.2: Using SWNCQ mode
[ 2.157122] sata_nv 0000:00:0d.2: setting latency timer to 64
[ 2.157804] scsi4 : sata_nv
[ 2.158184] scsi5 : sata_nv
[ 2.158598] ata5: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb800 irq 21
[ 2.158872] ata6: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb808 irq 21
[ 2.159341] pata_amd 0000:00:0c.0: version 0.4.1
[ 2.159670] pata_amd 0000:00:0c.0: setting latency timer to 64
[ 2.160396] scsi6 : pata_amd
[ 2.160767] scsi7 : pata_amd
[ 2.161524] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 2.161787] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 2.162449] ohci_hcd 0000:00:0a.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
[ 2.162738] ohci_hcd 0000:00:0a.0: setting latency timer to 64
[ 2.162989] ohci_hcd 0000:00:0a.0: OHCI Host Controller
[ 2.163249] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
[ 2.163517] ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
[ 2.218038] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.218298] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.218544] usb usb2: Product: OHCI Host Controller
[ 2.218789] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 2.219035] usb usb2: SerialNumber: 0000:00:0a.0
[ 2.219448] hub 2-0:1.0: USB hub found
[ 2.219703] hub 2-0:1.0: 10 ports detected
[ 2.324376] ata7.00: ATAPI: TOSHIBA DVD-ROM SD-M1612, 1004, max UDMA/33
[ 2.324633] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[ 2.340311] ata7.00: configured for UDMA/33
[ 2.468023] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.568027] usb 1-3: new high-speed USB device number 4 using ehci_hcd
[ 2.620049] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.620053] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.628353] ata3.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 2.628602] ata3.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.644320] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 2.644578] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.644591] ata3.00: configured for UDMA/133
[ 2.652255] ata1.00: configured for UDMA/133
[ 2.652688] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 2.700650] usb 1-3: New USB device found, idVendor=050d, idProduct=0234
[ 2.700920] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.701472] hub 1-3:1.0: USB hub found
[ 2.701901] hub 1-3:1.0: 4 ports detected
[ 3.004027] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[ 3.120039] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.144268] ata2.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7
[ 3.144541] ata2.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.152255] ata2.00: configured for UDMA/133
[ 3.152683] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 3.153230] scsi 2:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 3.156148] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.156191] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.156244] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.156247] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.156270] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.156390] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.156439] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.156441] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.156463] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.158869] sd 0:0:0:0: [sda] Write Protect is off
[ 3.159155] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.159764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.168084] sdb: sdb1 sdb2 sdb3 sdb4
[ 3.168883] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.181427] sdc: sdc1
[ 3.182048] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.191125] sda: sda1 sda2 sda3 sda4
[ 3.191834] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.218052] usb 2-1: New USB device found, idVendor=046d, idProduct=c00e
[ 3.218314] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.218572] usb 2-1: Product: USB-PS/2 Optical Mouse
[ 3.218830] usb 2-1: Manufacturer: Logitech
[ 3.524026] usb 2-2: new low-speed USB device number 3 using ohci_hcd
[ 3.620036] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.628346] ata4.00: ATA-8: ST32000542AS, CC34, max UDMA/133
[ 3.628621] ata4.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.644352] ata4.00: configured for UDMA/133
[ 3.644760] scsi 3:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5
[ 3.645316] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 3.645652] sd 3:0:0:0: [sdd] Write Protect is off
[ 3.645919] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.646200] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.670462] sdd: sdd1
[ 3.670991] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 3.742051] usb 2-2: New USB device found, idVendor=046d, idProduct=c30f
[ 3.742325] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.742592] usb 2-2: Product: Logitech USB Keyboard
[ 3.742855] usb 2-2: Manufacturer: Logitech
[ 4.112040] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.120168] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB04, max UDMA/100
[ 4.136160] ata6.00: configured for UDMA/100
[ 4.137825] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203B SB04 PQ: 0 ANSI: 5
[ 4.143567] scsi 6:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-M1612 1004 PQ: 0 ANSI: 5
[ 4.144071] ata8: port disabled--ignoring
[ 4.163392] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0a.0/usb2/2-1/2-1:1.0/input/input2
[ 4.163808] generic-usb 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-1/input0
[ 4.164840] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.165150] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.165756] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 4.171422] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 4.172110] sr 6:0:0:0: Attached scsi CD-ROM sr1
[ 4.172580] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.0/input/input3
[ 4.172989] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:0a.0-2/input0
[ 4.188176] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:0a.0/usb2/2-2/2-2:1.1/input/input4
[ 4.189789] generic-usb 0003:046D:C30F.0003: input,hidraw2: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:0a.0-2/input1
[ 4.190450] usbcore: registered new interface driver usbhid
[ 4.190754] usbhid: USB HID core driver
[ 4.550439] vga16fb: initializing
[ 4.551081] vga16fb: mapped to 0xffff8800000a0000
[ 4.551474] fb1: VGA16 VGA frame buffer device
[ 4.557964] device-mapper: uevent: version 1.0.3
[ 4.558536] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 4.856831] md: raid1 personality registered for level 1
[ 4.875593] mdadm: sending ioctl 800c0910 to a partition!
[ 4.875918] mdadm: sending ioctl 800c0910 to a partition!
[ 4.876238] mdadm: sending ioctl 1261 to a partition!
[ 4.876533] mdadm: sending ioctl 1261 to a partition!
[ 4.877041] mdadm: sending ioctl 1261 to a partition!
[ 4.877327] mdadm: sending ioctl 1261 to a partition!
[ 4.877787] mdadm: sending ioctl 1261 to a partition!
[ 4.878065] mdadm: sending ioctl 1261 to a partition!
[ 4.878506] mdadm: sending ioctl 1261 to a partition!
[ 4.878775] mdadm: sending ioctl 1261 to a partition!
[ 4.900124] md: md0 stopped.
[ 4.903367] md: bind<sdb1>
[ 4.904050] md: bind<sda1>
[ 4.906445] bio: create slab <bio-1> at 1
[ 4.906835] md/raid1:md0: active with 2 out of 2 mirrors
[ 4.907152] md0: detected capacity change from 0 to 98566144
[ 4.909233] md0: unknown partition table
[ 4.936914] md: md1 stopped.
[ 4.939124] md: bind<sdb3>
[ 4.939629] md: bind<sda3>
[ 4.942423] md/raid1:md1: active with 2 out of 2 mirrors
[ 4.942726] md1: detected capacity change from 0 to 79998943232
[ 4.944831] md1: unknown partition table
[ 4.986668] md: md2 stopped.
[ 4.988906] md: bind<sdb4>
[ 4.989402] md: bind<sda4>
[ 4.992856] md/raid1:md2: active with 2 out of 2 mirrors
[ 4.993147] md2: detected capacity change from 0 to 237973733376
[ 5.025156] md2: unknown partition table
[ 5.086185] md: md3 stopped.
[ 5.088785] md: bind<sdd1>
[ 5.089358] md: bind<sdc1>
[ 5.091261] md/raid1:md3: active with 2 out of 2 mirrors
[ 5.091518] md3: detected capacity change from 0 to 2000395101184
[ 5.097293] md3: unknown partition table
[ 5.196536] PM: Starting manual resume from disk
[ 5.196771] PM: Hibernation image partition 8:2 present
[ 5.196981] PM: Looking for hibernation image.
[ 5.197450] PM: Image not found (code -22)
[ 5.197675] PM: Hibernation image not present or could not be loaded.
[ 5.204771] REISERFS (device md1): found reiserfs format "3.6" with standard journal
[ 5.205004] REISERFS (device md1): using ordered data mode
[ 5.205210] reiserfs: using flush barriers
[ 5.215354] REISERFS (device md1): journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 5.217005] REISERFS (device md1): checking transaction log (md1)
[ 12.622500] REISERFS (device md1): replayed 352 transactions in 8 seconds
[ 13.185300] REISERFS (device md1): Using r5 hash to sort names
[ 14.932668] udevd[485]: starting version 175
[ 15.806164] EDAC MC: Ver: 2.1.0
[ 15.825093] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 15.889444] parport_pc 00:08: reported by Plug and Play ACPI
[ 15.889868] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 15.941209] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 16.005824] scsi_verify_blk_ioctl: 342 callbacks suppressed
[ 16.006181] mdadm: sending ioctl 1261 to a partition!
[ 16.006437] mdadm: sending ioctl 1261 to a partition!
[ 16.006440] mdadm: sending ioctl 1261 to a partition!
[ 16.007189] mdadm: sending ioctl 1261 to a partition!
[ 16.074711] MCE: In-kernel MCE decoding enabled.
[ 16.081706] AMD64 EDAC driver v3.4.0
[ 16.082496] EDAC amd64: DRAM ECC disabled.
[ 16.082837] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 16.082839] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 16.082840] (Note that use of the override may cause unknown side effects.)
[ 16.133923] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.147717] ACPI: resource nForce2_smbus [io 0x1c00-0x1c3f] conflicts with ACPI region SM00 [io 0x1c00-0x1c05]
[ 16.148079] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.148443] i2c i2c-3: nForce2 SMBus adapter at 0x1c40
[ 16.316567] udevd[554]: renamed network interface eth1 to eth2
[ 16.332574] udevd[545]: renamed network interface eth0 to eth1
[ 16.448574] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 16.448909] snd_hda_intel 0000:00:0e.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 16.449249] hda_intel: msi for device 1043:81f6 set to 0
[ 16.449620] snd_hda_intel 0000:00:0e.1: setting latency timer to 64
[ 17.151668] mdadm: sending ioctl 800c0910 to a partition!
[ 17.151741] mdadm: sending ioctl 800c0910 to a partition!
[ 17.151745] mdadm: sending ioctl 800c0910 to a partition!
[ 17.151752] mdadm: sending ioctl 1261 to a partition!
[ 17.151754] mdadm: sending ioctl 1261 to a partition!
[ 17.153310] mdadm: sending ioctl 800c0910 to a partition!
[ 17.329393] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0e.1/input/input6
[ 20.412225] Adding 1951892k swap on /dev/sda2. Priority:5 extents:1 across:1951892k
[ 20.454721] Adding 1951892k swap on /dev/sdb2. Priority:5 extents:1 across:1951892k
[ 20.881400] reiserfs: enabling write barrier flush mode
[ 21.691661] loop: module loaded
[ 21.826328] microcode: CPU0: family 15 not supported
[ 22.027093] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.027465] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 22.027800] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 22.028158] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 22.029044] sr 5:0:0:0: Attached scsi generic sg4 type 5
[ 22.029645] sr 6:0:0:0: Attached scsi generic sg5 type 5
[ 22.161067] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[ 22.161414] powernow-k8: fid 0xe (2200 MHz), vid 0xc
[ 22.161693] powernow-k8: fid 0xc (2000 MHz), vid 0xe
[ 22.161958] powernow-k8: fid 0xa (1800 MHz), vid 0x10
[ 22.162216] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 22.223609] usbcore: registered new interface driver usblp
[ 22.251610] Bridge firewalling registered
[ 22.341488] Driver for 1-wire Dallas network protocol.
[ 22.381141] it87: Found IT8716F chip at 0x290, revision 0
[ 22.381749] it87: VID is disabled (pins used for GPIO)
[ 22.382376] ACPI: resource it87 [io 0x0295-0x0296] conflicts with ACPI region HWRE [io 0x295-0x296]
[ 22.382923] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 22.572308] netconsole: local port 6666
[ 22.572907] netconsole: local IP 172.16.0.3
[ 22.573456] netconsole: interface 'eth1'
[ 22.573984] netconsole: remote port 6666
[ 22.574506] netconsole: remote IP 172.16.0.13
[ 22.575020] netconsole: remote ethernet address 00:1c:23:85:ba:39
[ 22.575543] netconsole: device eth1 not up yet, forcing it
[ 22.577491] forcedeth 0000:00:10.0: irq 46 for MSI/MSI-X
[ 22.581319] netconsole: carrier detect appears untrustworthy, waiting 4 seconds
[ 26.589255] console [netcon0] enabled
[ 26.589867] netconsole: network logging started
[ 28.259976] scsi_verify_blk_ioctl: 770 callbacks suppressed
[ 28.260619] mdadm: sending ioctl 1261 to a partition!
[ 28.261175] mdadm: sending ioctl 1261 to a partition!
[ 33.088026] eth1: no IPv6 routers present
[ 39.876138] mdadm: sending ioctl 1261 to a partition!
[ 39.876657] mdadm: sending ioctl 1261 to a partition!
[ 39.971818] mdadm: sending ioctl 1261 to a partition!
[ 39.972424] mdadm: sending ioctl 1261 to a partition!
[ 109.781600] mdadm: sending ioctl 1261 to a partition!
[ 109.782100] mdadm: sending ioctl 1261 to a partition!
[ 110.096439] kjournald starting. Commit interval 5 seconds
[ 110.105634] EXT3-fs (md0): using internal journal
[ 110.106177] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 110.107518] REISERFS (device md2): found reiserfs format "3.6" with standard journal
[ 110.108096] REISERFS (device md2): using ordered data mode
[ 110.108585] reiserfs: using flush barriers
[ 110.109649] REISERFS (device md2): journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 110.113237] REISERFS (device md2): checking transaction log (md2)
[ 110.223417] REISERFS (device md2): Using r5 hash to sort names
[ 110.267232] REISERFS (device md3): found reiserfs format "3.6" with standard journal
[ 110.267913] REISERFS (device md3): using ordered data mode
[ 110.268482] reiserfs: using flush barriers
[ 110.273595] REISERFS (device md3): journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 110.277226] REISERFS (device md3): checking transaction log (md3)
[ 110.393104] REISERFS (device md3): Using r5 hash to sort names
[ 110.478527] REISERFS (device md3): Removing [197092 650090 0x0 SD]..done
[ 110.484729] REISERFS (device md3): Removing [197092 650087 0x0 SD]..done
[ 110.515457] REISERFS (device md3): Removing [195090 650080 0x0 SD]..done
[ 110.525036] REISERFS (device md3): Removing [197092 649784 0x0 SD]..done
[ 110.525763] REISERFS (device md3): Removing [195090 649756 0x0 SD]..done
[ 110.619102] REISERFS (device md3): Removing [573640 649710 0x0 SD]..done
[ 110.632630] REISERFS (device md3): Removing [573640 647727 0x0 SD]..done
[ 110.633358] REISERFS (device md3): Removing [197092 647325 0x0 SD]..done
[ 110.634108] REISERFS (device md3): There were 8 uncompleted unlinks/truncates. Completed
[ 113.018956] RPC: Registered named UNIX socket transport module.
[ 113.019597] RPC: Registered udp transport module.
[ 113.020540] RPC: Registered tcp transport module.
[ 113.021139] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 113.094176] FS-Cache: Loaded
[ 113.145820] FS-Cache: Netfs 'nfs' registered for caching
[ 113.170545] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 117.020103] fuse init (API version 7.17)
[ 120.740933] forcedeth 0000:00:11.0: irq 47 for MSI/MSI-X
[ 121.684982] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
[ 123.859388] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 123.879837] [drm] nouveau 0000:01:00.0: 0xC24F: Parsing digital output script table
[ 123.929492] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 123.929504] [drm] nouveau 0000:01:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 127.983605] Bluetooth: Core ver 2.16
[ 127.983697] NET: Registered protocol family 31
[ 127.983706] Bluetooth: HCI device and connection manager initialized
[ 127.983724] Bluetooth: HCI socket layer initialized
[ 127.983732] Bluetooth: L2CAP socket layer initialized
[ 127.984417] Bluetooth: SCO socket layer initialized
[ 128.005133] Bluetooth: RFCOMM TTY layer initialized
[ 128.005180] Bluetooth: RFCOMM socket layer initialized
[ 128.005187] Bluetooth: RFCOMM ver 1.11
[ 128.038953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 128.038977] Bluetooth: BNEP filters: protocol multicast
[ 131.253915] lp0: using parport0 (interrupt-driven).
[ 131.331127] ppdev: user-space parallel port driver
[ 131.584025] eth2: no IPv6 routers present
[ 153.921819] postgres (6750): /proc/6750/oom_adj is deprecated, please use /proc/6750/oom_score_adj instead.
[ 161.375945] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 162.704387] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 164.003213] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 164.003669] NFSD: starting 90-second grace period
[ 170.938629] ehci_hcd 0000:00:0a.1: PCI INT B disabled
[ 170.938660] ehci_hcd 0000:00:0a.1: PME# enabled
[ 171.000100] ehci_hcd 0000:00:0a.1: BAR 0: set to [mem 0xfe02e000-0xfe02e0ff] (PCI address [0xfe02e000-0xfe02e0ff])
[ 171.000123] ehci_hcd 0000:00:0a.1: restoring config space at offset 0xf (was 0x1030200, writing 0x10302ff)
[ 171.000136] ehci_hcd 0000:00:0a.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
[ 171.000196] ehci_hcd 0000:00:0a.1: PME# disabled
[ 171.000209] ehci_hcd 0000:00:0a.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
[ 171.000215] ehci_hcd 0000:00:0a.1: setting latency timer to 64
Reply to: