--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.3.0-trunk-686-pae: sata_sil (on sil 3512) hotplug broken again
- From: Michael Schmitt <tcwardrobe@gmail.com>
- Date: Sun, 06 May 2012 00:49:48 +0200
- Message-id: <20120505224948.6358.15754.reportbug@adrastea.tcw.local>
Package: linux-2.6
Version: 3.3.4-1~experimental.1
Severity: normal
Dear Maintainer,
I tend to hotswap sata drives with a frameless-sata-hotswap-enclosure connected
to a Silicon Image 3512 controller on a regular basis and have to report...
broken again. :)
The last 3.2 kernel did work, the first 3.3 image did break it. I had
that problem once before (even if I do not find the ticket anymore) and it got
fixed rather fast. I do not even know anymore if I did report it upstream or in
the Debian BTS, but as I am not sure if a Debian patch may be responsible I
report it here.
With the 3.3 kernel before this one I could modprobe -r / modprobe the module so
the controller does scan the bus again but with this one it got worse:
adrastea:~# modprobe -r sata_sil
FATAL: Module sata_sil is in use.
adrastea:~# lsmod|grep sata
sata_sil 12788 1
No idea what may still use that module, as nothing is mounted / connected to
that controller right now.
regards
Michael
-- Package-specific info:
** Version:
Linux version 3.3.0-trunk-686-pae (Debian 3.3.4-1~experimental.1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 SMP Wed May 2 12:54:40 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.3.0-trunk-686-pae root=/dev/mapper/storage1-root ro quiet
** Not tainted
** Kernel log:
[ 15.212800] scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 15.213304] scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 15.213802] scsi 7:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[ 15.214302] scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 15.228040] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 15.228917] sd 7:0:0:1: [sde] Attached SCSI removable disk
[ 15.229533] sd 7:0:0:2: [sdf] Attached SCSI removable disk
[ 15.231002] sd 7:0:0:3: [sdg] Attached SCSI removable disk
[ 15.248026] usb 2-2: reset low-speed USB device number 3 using uhci_hcd
[ 15.609338] usb 2-1.3: new low-speed USB device number 6 using uhci_hcd
[ 15.749336] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c517
[ 15.749341] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 15.749345] usb 2-1.3: Product: USB Receiver
[ 15.749348] usb 2-1.3: Manufacturer: Logitech
[ 15.766656] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.0/input/input9
[ 15.766742] logitech 0003:046D:C517.0005: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input0
[ 15.798336] logitech 0003:046D:C517.0006: fixing up Logitech keyboard report descriptor
[ 15.799021] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1.3/2-1.3:1.1/input/input10
[ 15.799165] logitech 0003:046D:C517.0006: input,hiddev0,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1.3/input1
[ 16.712710] EXT3-fs (dm-1): using internal journal
[ 16.856546] loop: module loaded
[ 16.896794] coretemp coretemp.0: Using relative temperature scale!
[ 16.896803] coretemp coretemp.0: Using relative temperature scale!
[ 16.909519] w83627ehf: Found W83627EHG chip at 0x290
[ 16.909625] ACPI Warning: 0x00000295-0x00000296 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SIOR.HWRE 1 (20120111/utaddress-251)
[ 16.909632] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 76.445111] scsi_verify_blk_ioctl: 186 callbacks suppressed
[ 76.445114] mdadm: sending ioctl 1261 to a partition!
[ 76.445116] mdadm: sending ioctl 1261 to a partition!
[ 77.437779] kjournald starting. Commit interval 5 seconds
[ 77.438657] EXT3-fs (dm-2): using internal journal
[ 77.438662] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 77.463284] kjournald starting. Commit interval 5 seconds
[ 77.477205] EXT3-fs (md0): using internal journal
[ 77.477209] EXT3-fs (md0): mounted filesystem with ordered data mode
[ 77.504536] kjournald starting. Commit interval 5 seconds
[ 77.505256] EXT3-fs (dm-3): using internal journal
[ 77.505260] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[ 77.542971] kjournald starting. Commit interval 5 seconds
[ 77.548217] EXT3-fs (dm-4): using internal journal
[ 77.548221] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[ 77.590824] kjournald starting. Commit interval 5 seconds
[ 77.591262] EXT3-fs (dm-5): using internal journal
[ 77.591266] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 79.309560] Bridge firewalling registered
[ 79.326344] device eth0 entered promiscuous mode
[ 79.329437] r8169 0000:02:00.0: eth0: link down
[ 79.329584] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 79.332364] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 81.227310] r8169 0000:02:00.0: eth0: link up
[ 81.227514] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 81.228306] br0: port 1(eth0) entered forwarding state
[ 81.228311] br0: port 1(eth0) entered forwarding state
[ 81.228447] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 84.724129] RPC: Registered named UNIX socket transport module.
[ 84.724132] RPC: Registered udp transport module.
[ 84.724134] RPC: Registered tcp transport module.
[ 84.724135] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 84.905276] FS-Cache: Loaded
[ 84.968936] FS-Cache: Netfs 'nfs' registered for caching
[ 84.992630] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 86.689787] fuse init (API version 7.18)
[ 92.056026] br0: no IPv6 routers present
[ 94.576792] Bluetooth: Core ver 2.16
[ 94.576811] NET: Registered protocol family 31
[ 94.576813] Bluetooth: HCI device and connection manager initialized
[ 94.576816] Bluetooth: HCI socket layer initialized
[ 94.576817] Bluetooth: L2CAP socket layer initialized
[ 94.576825] Bluetooth: SCO socket layer initialized
[ 94.712158] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 94.712161] Bluetooth: BNEP filters: protocol multicast
[ 94.785621] Bluetooth: RFCOMM TTY layer initialized
[ 94.785625] Bluetooth: RFCOMM socket layer initialized
[ 94.785627] Bluetooth: RFCOMM ver 1.11
[ 95.554853] lp0: using parport0 (interrupt-driven).
[ 95.593288] ppdev: user-space parallel port driver
[ 96.256068] br0: port 1(eth0) entered forwarding state
[ 105.313409] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 105.514076] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 105.693454] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 106.637803] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 106.649379] NFSD: starting 90-second grace period
[ 106.662775] Ebtables v2.0 registered
[ 106.789256] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 358.983488] ata5: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xe frozen
[ 358.983493] ata5: SError: { PHYRdyChg }
[ 358.983505] ata5: hard resetting link
[ 359.704029] ata5: SATA link down (SStatus 0 SControl 310)
[ 364.704027] ata5: hard resetting link
[ 365.024027] ata5: SATA link down (SStatus 0 SControl 310)
[ 370.024038] ata5: hard resetting link
[ 370.344028] ata5: SATA link down (SStatus 0 SControl 310)
[ 370.344040] ata5.00: disabled
[ 370.344051] ata5: EH complete
[ 370.344464] ata5.00: detaching (SCSI 4:0:0:0)
[ 370.347082] sd 4:0:0:0: [sdc] Synchronizing SCSI cache
[ 370.347126] sd 4:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 370.347131] sd 4:0:0:0: [sdc] Stopping disk
[ 370.347142] sd 4:0:0:0: [sdc] START_STOP FAILED
[ 370.347145] sd 4:0:0:0: [sdc] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
** Model information
not available
** Loaded modules:
ip6table_filter
ip6_tables
ebtable_nat
ebtables
ipt_MASQUERADE
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
xt_state
nf_conntrack
ipt_REJECT
xt_CHECKSUM
acpi_cpufreq
mperf
iptable_mangle
cpufreq_powersave
cpufreq_conservative
cpufreq_stats
xt_tcpudp
iptable_filter
ip_tables
cpufreq_userspace
x_tables
ppdev
lp
rfcomm
bnep
bluetooth
rfkill
crc16
binfmt_misc
fuse
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
bridge
stp
kvm_intel
kvm
hwmon_vid
coretemp
loop
snd_hda_codec_analog
snd_wavefront
snd_cs4236
snd_wss_lib
snd_opl3_lib
snd_hda_intel
snd_hda_codec
snd_hwdep
nouveau
snd_pcm_oss
snd_mixer_oss
snd_mpu401
snd_pcm
snd_page_alloc
mxm_wmi
snd_mpu401_uart
wmi
snd_seq_midi
video
usb_storage
uas
usbled
joydev
sr_mod
ttm
snd_seq_midi_event
snd_seq
sata_sil
i2c_i801
r8169
drm_kms_helper
drm
iTCO_wdt
cdrom
processor
snd_rawmidi
snd_timer
iTCO_vendor_support
thermal_sys
snd_seq_device
i2c_core
snd
mii
ns558
pcspkr
gameport
soundcore
parport_pc
rng_core
button
asus_atk0110
parport
ehci_hcd
evdev
ext3
mbcache
jbd
dm_crypt
dm_mod
raid1
md_mod
sha256_generic
aes_i586
aes_generic
cbc
hid_logitech
ff_memless
usbhid
hid
power_supply
sd_mod
crc_t10dif
ata_generic
ata_piix
libata
uhci_hcd
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8178]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: bc000000-bfffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5LD2-VM Mainboard (Realtek ALC 882 codec) [1043:817f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at bbdf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: b8000000-b81fffff
Prefetchable memory behind bridge: 00000000b8200000-00000000b83fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: bbf00000-bbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 5400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 5800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 6000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 6400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM,P5LD2-VM Mainboard [1043:8179]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at bbdffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000a000-0000bfff
Memory behind bridge: bbe00000-bbefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 8000 [size=8]
Region 1: I/O ports at 7800 [size=4]
Region 2: I/O ports at 7400 [size=8]
Region 3: I/O ports at 7000 [size=4]
Region 4: I/O ports at 6800 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:2601]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at 9800 [size=8]
Region 1: I/O ports at 9400 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8800 [size=4]
Region 4: I/O ports at 8400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8179]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 23
Region 4: I/O ports at 0400 [size=32]
01:01.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller [1095:3512] (rev 01)
Subsystem: Silicon Image, Inc. SiI 3512 SATARaid Controller [1095:6512]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a400 [size=16]
Region 5: Memory at bbeffc00 (32-bit, non-prefetchable) [size=512]
Expansion ROM at bbe00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. P5B [1043:81aa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at bbfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at bbfe0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96 [GeForce 9500 GT] [10de:0640] (rev a1) (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at bf000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=512M]
Region 3: Memory at bc000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at e800 [size=128]
Expansion ROM at bef80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
** USB devices:
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 003: ID 1d34:0004
Bus 002 Device 005: ID 0451:1446 Texas Instruments, Inc. TUSB2040/2070 Hub
Bus 002 Device 006: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable'), (50, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.3.0-trunk-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.3.0-trunk-686-pae depends on:
ii debconf [debconf-2.0] 1.5.42
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 6-2
ii linux-base 3.5
ii module-init-tools 6-2
Versions of packages linux-image-3.3.0-trunk-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-32
Versions of packages linux-image-3.3.0-trunk-686-pae suggests:
pn grub-pc 1.99-21
pn linux-doc-3.3 <none>
Versions of packages linux-image-3.3.0-trunk-686-pae is related to:
pn firmware-atheros 0.35
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf-show failed
--- End Message ---