[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#589832: marked as done (xserver-xorg-input-wacom: Bamboo Pen & Touch not supported)

Your message dated Sun, 24 Jun 2012 21:46:59 +0100
with message-id <1340570819.741.34.camel@deadeye.wl.decadent.org.uk>
and subject line Re: xserver-xorg-input-wacom: Bamboo Pen & Touch not supported
has caused the Debian Bug report #589832,
regarding xserver-xorg-input-wacom: Bamboo Pen & Touch not supported
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
589832: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=589832
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: xserver-xorg-input-wacom
Version: 0.10.5+20100416-1
Severity: normal


I get no input device for this tablet at all.

[32056.572013] usb 7-1: new full speed USB device using uhci_hcd and
address 4
[32056.741252] usb 7-1: New USB device found, idVendor=056a,
idProduct=00d1
[32056.741255] usb 7-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[32056.741257] usb 7-1: Product: CTH-460
[32056.741259] usb 7-1: Manufacturer: Wacom Co.,Ltd.

The kernel driver does not bind to the device if manually loaded:

[32502.437402] usbcore: registered new interface driver wacom
[32502.437404] wacom: v1.52:USB Wacom tablet driver

# echo 7-1 > /sys/bus/usb/drivers/wacom/bind
bash: echo: write error: No such device
# echo 7-1:1.1 > /sys/bus/usb/drivers/wacom/bind
bash: echo: write error: No such device
# echo 7-1:1.0 > /sys/bus/usb/drivers/wacom/bind
bash: echo: write error: No such device

T:  Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=056a ProdID=00d1 Rev= 1.06
S:  Manufacturer=Wacom Co.,Ltd.
S:  Product=CTH-460
C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr= 98mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=   9 Ivl=4ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=(none)
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=4ms

-- System Information:
Debian Release: 5.0.5
  APT prefers stable
  APT policy: (900, 'stable'), (700, 'testing'), (500, 'oldstable'), (500, 'unstable'), (200, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.34-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages xserver-xorg-input-wacom depends on:
ii  libc6                         2.11.2-2   Embedded GNU C Library: Shared lib
ii  libx11-6                      2:1.3.3-3  X11 client-side library
ii  libxi6                        2:1.3-4    X11 Input extension library
ii  xserver-xorg-core             2:1.7.7-3  Xorg X server - core server

xserver-xorg-input-wacom recommends no packages.

Versions of packages xserver-xorg-input-wacom suggests:
pn  xinput                        <none>     (no description available)

-- no debconf information

--- End Message ---
--- Begin Message --- 
Version: 2.6.37~rc4-1~experimental.1

This particular model (device ID 00D1) has been supported since Linux
2.6.37.

Ben.

-- 
Ben Hutchings
I say we take off; nuke the site from orbit.  It's the only way to be sure.

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---
Reply to: