Bug#671116: linux-image-3.2.0-2-686-pae: LCD backlight setting doesn't work on HP ProBook 451x
Package: linux-2.6
Version: 3.2.15-1
Severity: normal
Hi. This is bugging me for quite some time (more than 6 months now).
I can not configure the LCD backlight brightness on my HP ProBook 4515s.
I tried booting with acpi_backlight="legacy|vendor", but all they did
was to keep the brightness to maximum; keyboard shortcuts didn't do
anything and also "echo 10 > /sys/class/backlight/acpi_video0/brightness"
didn't do anything.
Booting without the acpi_backlight kernel parameter just dims the LCD to
a lower brightness level, but again, I can't change it neither through
the keyboard, nor the sysfs interface. I preffer to keep it to maximum
with the acpi_backlight=vendor.
I also tried booting with "acpi_osi=Linux", but it made no change
whatsoever.
Changing the brightness through the sysfs interface does nothing (it
appears it does, but the LCD doesn't change brightness physicaly):
root@x:~# ls /sys/class/backlight/acpi_video0/
actual_brightness bl_power brightness device max_brightness power
subsystem type uevent
root@x:~# cat /sys/class/backlight/acpi_video0/max_brightness
24
root@x:~# echo 10 > /sys/class/backlight/acpi_video0/brightness
root@x:~# cat /sys/class/backlight/acpi_video0/actual_brightness
10
root@x:~# cat /sys/class/backlight/acpi_video0/brightness
10
Thanks.
-- Package-specific info:
** Version:
Linux version 3.2.0-2-686-pae (Debian 3.2.15-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-3) ) #1 SMP Sun Apr 15 17:56:31 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-2-686-pae root=UUID=c82fd34e-9549-4229-b8d2-5448428acfeb ro quiet splash acpi_osi=Linux acpi_backlight=legacy
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 9.336426] wl: module license 'MIXED/Proprietary' taints kernel.
[ 9.336431] Disabling lock debugging due to kernel taint
[ 9.375908] wl 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.375921] wl 0000:06:00.0: setting latency timer to 64
[ 9.417024] lib80211_crypt: registered algorithm 'TKIP'
[ 9.417348] wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[ 9.480705] udevd[385]: renamed network interface eth0 to eth1
[ 9.608445] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 9.649756] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 10.083499] Bluetooth: Core ver 2.16
[ 10.083523] NET: Registered protocol family 31
[ 10.083526] Bluetooth: HCI device and connection manager initialized
[ 10.083530] Bluetooth: HCI socket layer initialized
[ 10.083532] Bluetooth: L2CAP socket layer initialized
[ 10.083741] Bluetooth: SCO socket layer initialized
[ 10.115934] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.116189] usbcore: registered new interface driver btusb
[ 10.167102] [fglrx] Maximum main memory to use for locked dma buffers: 2644 MBytes.
[ 10.167193] [fglrx] vendor: 1002 device: 9612 count: 1
[ 10.167733] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
[ 10.167750] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.167756] pci 0000:01:05.0: setting latency timer to 64
[ 10.168317] [fglrx] Kernel PAT support is enabled
[ 10.168343] [fglrx] module loaded - fglrx 8.95.3 [Mar 8 2012] with 1 minors
[ 10.413215] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.413223] snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0
[ 10.413233] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.683313] Linux media interface: v0.10
[ 10.721783] Linux video capture interface: v2.00
[ 10.802078] uvcvideo: Found UVC 1.00 device CNF8243 (04f2:b159)
[ 10.859944] input: CNF8243 as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input9
[ 10.860060] usbcore: registered new interface driver uvcvideo
[ 10.860063] USB Video Class driver (1.1.1)
[ 11.035918] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input10
[ 11.043631] snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 11.043695] snd_hda_intel 0000:01:05.1: setting latency timer to 64
[ 12.892361] Adding 2931824k swap on /dev/sda6. Priority:-1 extents:1 across:2931824k
[ 12.895865] EXT3-fs (sda5): warning: maximal mount count reached, running e2fsck is recommended
[ 12.896337] EXT3-fs (sda5): using internal journal
[ 13.015240] loop: module loaded
[ 14.058260] kjournald starting. Commit interval 5 seconds
[ 14.058384] EXT3-fs (sda7): warning: maximal mount count reached, running e2fsck is recommended
[ 14.058862] EXT3-fs (sda7): using internal journal
[ 14.058867] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 14.168067] kjournald starting. Commit interval 5 seconds
[ 14.168089] EXT3-fs (sda3): warning: maximal mount count reached, running e2fsck is recommended
[ 14.168445] EXT3-fs (sda3): using internal journal
[ 14.168450] EXT3-fs (sda3): mounted filesystem with ordered data mode
[ 16.234571] fuse init (API version 7.17)
[ 17.401961] NET: Registered protocol family 15
[ 17.420603] alg: No test for cipher_null (cipher_null-generic)
[ 17.420696] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 17.420741] alg: No test for digest_null (digest_null-generic)
[ 17.420798] alg: No test for compress_null (compress_null-generic)
[ 17.456862] padlock_sha: VIA PadLock Hash Engine not detected.
[ 17.479757] padlock_sha: VIA PadLock Hash Engine not detected.
[ 17.548592] Intel AES-NI instructions are not detected.
[ 18.981328] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 21.451807] Bluetooth: RFCOMM TTY layer initialized
[ 21.451814] Bluetooth: RFCOMM socket layer initialized
[ 21.451816] Bluetooth: RFCOMM ver 1.11
[ 21.478915] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.478920] Bluetooth: BNEP filters: protocol multicast
[ 21.644365] lp: driver loaded but no devices found
[ 21.664218] ppdev: user-space parallel port driver
[ 28.582618] powernow-k8: Found 1 AMD Turion(tm)X2 Dual Core Mobile RM-76 (2 cpu cores) (version 2.20.00)
[ 28.582677] powernow-k8: 0 : pstate 0 (2300 MHz)
[ 28.582680] powernow-k8: 1 : pstate 1 (1150 MHz)
[ 28.582682] powernow-k8: 2 : pstate 2 (575 MHz)
[ 31.236077] [fglrx] GART Table is not in FRAME_BUFFER range
[ 31.237392] [fglrx] Could not enable MSI; System prevented initialization
[ 31.240648] [fglrx] Firegl kernel thread PID: 2292
[ 31.240847] [fglrx] Firegl kernel thread PID: 2293
[ 31.241136] [fglrx] Firegl kernel thread PID: 2294
[ 31.241350] [fglrx] IRQ 18 Enabled
[ 32.073183] sky2 0000:02:00.0: eth1: enabling interface
[ 32.073617] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 32.473318] [fglrx] Gart USWC size:872 M.
[ 32.473324] [fglrx] Gart cacheable size:344 M.
[ 32.473330] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 32.473333] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000
[ 39.227752] vboxdrv: Found 2 processor cores.
[ 39.228462] vboxdrv: fAsync=1 offMin=0x1c0e06e offMax=0x1c0e06e
[ 39.228676] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 39.228687] vboxdrv: Successfully loaded version 4.1.12_Debian (interface 0x00190000).
[ 39.611955] vboxpci: IOMMU not found (not registered)
[ 41.847618] ohci_hcd 0000:00:12.0: PCI INT A disabled
[ 41.848161] ohci_hcd 0000:00:12.1: PCI INT A disabled
[ 41.849065] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 41.849669] ehci_hcd 0000:00:13.2: PCI INT B disabled
[ 41.849734] ehci_hcd 0000:00:13.2: PME# enabled
[ 42.220095] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0xd4409400-0xd44094ff] (PCI address [0xd4409400-0xd44094ff])
[ 42.220165] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013)
[ 42.220228] ehci_hcd 0000:00:13.2: PME# disabled
[ 42.220257] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 42.396244] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 42.396377] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 42.420248] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 42.599988] ohci_hcd 0000:00:13.0: PCI INT A disabled
[ 42.600611] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
** Model information
not available
** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
michael_mic
arc4
ecb
powernow_k8
mperf
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
cpufreq_powersave
parport_pc
ppdev
lp
parport
bnep
rfcomm
binfmt_misc
uinput
deflate
ctr
twofish_generic
twofish_i586
twofish_common
camellia
serpent
blowfish_generic
blowfish_common
cast5
des_generic
cbc
cryptd
aes_i586
aes_generic
xcbc
rmd160
sha512_generic
sha256_generic
sha1_generic
hmac
crypto_null
af_key
fuse
loop
snd_hda_codec_hdmi
snd_hda_codec_analog
uvcvideo
videodev
media
snd_hda_intel
snd_hda_codec
snd_hwdep
fglrx(P)
btusb
bluetooth
snd_pcm_oss
snd_mixer_oss
crc16
snd_pcm
snd_page_alloc
snd_seq_midi
snd_seq_midi_event
snd_rawmidi
snd_seq
snd_seq_device
joydev
lib80211_crypt_tkip
snd_timer
snd
wl(P)
sp5100_tco
soundcore
i2c_piix4
k10temp
i2c_core
battery
shpchp
psmouse
hp_wmi
sparse_keymap
rfkill
serio_raw
pcspkr
evdev
hp_accel
lis3lv02d
ac
input_polldev
power_supply
processor
lib80211
container
wmi
ext3
mbcache
jbd
btrfs
crc32c
libcrc32c
zlib_deflate
sd_mod
crc_t10dif
sr_mod
cdrom
video
ahci
libahci
fan
thermal
thermal_sys
libata
ohci_hcd
button
ehci_hcd
usbcore
scsi_mod
sky2
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600]
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d4200000-d43fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00004fff
Memory behind bridge: d3100000-d41fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d2100000-d30fffff
Prefetchable memory behind bridge: 00000000d1000000-00000000d1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 4) [1022:9608] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: d2000000-d20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 6018 [size=8]
Region 1: I/O ports at 6024 [size=4]
Region 2: I/O ports at 6010 [size=8]
Region 3: I/O ports at 6020 [size=4]
Region 4: I/O ports at 6000 [size=16]
Region 5: Memory at d4409000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4408000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4407000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d4409500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d4406000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d4405000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d4409400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3a)
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR+ <PERR+ INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Hewlett-Packard Company Device [103c:3078]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d4400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=80, subordinate=8f, sec-latency=64
I/O behind bridge: 00001000-00001fff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d4404000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration [1022:1300] (rev 40)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Address Map [1022:1301]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller [1022:1302]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control [1022:1303]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h Processor Link Control [1022:1304]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] [1002:9612] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 5000 [size=256]
Region 2: Memory at d4300000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at d4200000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] [1002:960f]
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d4310000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8072 PCI-E Gigabit Ethernet Controller [11ab:436c] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:3077]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d3100000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 3000 [size=256]
Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
06:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:1508]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d2000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f2:b159 Chicony Electronics Co., Ltd
Bus 006 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-686-pae depends on:
ii debconf [debconf-2.0] 1.5.42
ii initramfs-tools [linux-initramfs-tool] 0.102
ii kmod 6-2
ii linux-base 3.5
ii module-init-tools 6-2
Versions of packages linux-image-3.2.0-2-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-30
Versions of packages linux-image-3.2.0-2-686-pae suggests:
pn grub-pc 1.99-21
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-686-pae is related to:
pn firmware-atheros 0.35
pn firmware-bnx2 0.35
pn firmware-bnx2x 0.35
pn firmware-brcm80211 <none>
pn firmware-intelwimax 0.35
pn firmware-ipw2x00 0.35
pn firmware-ivtv 0.35
pn firmware-iwlwifi 0.35
pn firmware-libertas 0.35
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic 0.35
pn firmware-ralink 0.35
pn firmware-realtek 0.35
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: true
linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: false
linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae:
Reply to: