El día 31 de marzo de 2012 13:01, Jonathan Nieder <jrnieder@gmail.com> escribió: > tags 666506 = moreinfo > # failed boot? > severity 666506 important > quit > > Hi Fernando, Hi Jonathan, > > Fernando Cerezal wrote: > >> Justification: breaks the whole system >> >> IDE bus modules are not included in newer versions of linux-image, >> including 3.2.12-1 and 3.2.13-1. > > Current Debian kernels get PATA support using the libata facility > (see CONFIG_PATA_* in the .config). Yes, these modules are checked. > Please attach messages from > your failed boot, as collected with netconsole or a serial console, > or, failing that, a photograph of the screen. I dont boot from IDE device, so I can boot. I have two ide devices and they are not recognized, so I report this way because potentially system can not boot. Excuse if I was too prudent filling report this way. Actually, my devices, a hard disk and a dvd reader are not recognized. I have just reboot for sending you a clean dmesg. I attach lspci as you asked me. > > Please also attach full "dmesg" and "lspci -vvnn" output from a > successful boot so we can get to know your hardware. I have several disks: sda, sdb and sdc are sata disk in two raids. sdd is an android phone. Using linux-image-3.2.0-1 there were a hda device (dvd reader) and a hdb device (hard disk). They dont exist now. > > Hope that helps, Thank you very much. > Jonathan
Attachment:
lspci
Description: Binary data
Attachment:
dmesg
Description: Binary data