--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.30-1-amd64: hibernate fails on HP dv9750ed laptop
- From: Aioanei Rares <rares.aioanei@gmail.com>
- Date: Mon, 10 Aug 2009 15:47:37 +0300
- Message-id: <20090810124737.4131.37837.reportbug@debian>
Package: linux-image-2.6.30-1-amd64
Version: 2.6.30-5
Severity: normal
When I select 'hibernate' from the kde menu, the laptop shuts down, but fails to resume, eg
I get a blank screen and the laptop freezes; only a button shutdown helps.
-- Package-specific info:
** Version:
Linux version 2.6.30-1-amd64 (Debian 2.6.30-5) (maks@debian.org) (gcc version 4.3.3 (Debian 4.3.3-5) ) #1 SMP Mon Aug 3 12:28:22 UTC 2009
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.30-1-amd64 root=UUID=8dc1a88f-e326-4259-9d48-521a188b8d04 ro quiet
** Not tainted
** Kernel log:
[ 3.704832] ata1.00: 488397168 sectors, multi 16: LBA48
[ 3.705827] ata1.00: configured for UDMA/100
[ 3.720134] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 3.730870] ide-cd driver 5.00
[ 3.734556] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 3.734564] Uniform CD-ROM driver Revision: 3.20
[ 3.752926] Driver 'sd' needs updating - please use bus_type methods
[ 3.753123] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 3.753142] sd 0:0:0:0: [sda] Write Protect is off
[ 3.753146] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.753169] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.753275] sda:<6>usbcore: registered new interface driver hiddev
[ 3.763429] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:02.0/usb2/2-7/2-7:1.0/input/input3
[ 3.763497] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:02.0-7/input0
[ 3.763521] usbcore: registered new interface driver usbhid
[ 3.763525] usbhid: v2.6:USB HID core driver
[ 3.777123] sda1 sda2 sda3 sda4 < sda5 >
[ 3.819935] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.139186] PM: Starting manual resume from disk
[ 4.155247] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.155251] EXT3-fs: write access will be enabled during recovery.
[ 7.925023] kjournald starting. Commit interval 5 seconds
[ 7.925043] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 7.925052] ext3_orphan_cleanup: deleting unreferenced inode 426841
[ 7.925119] ext3_orphan_cleanup: deleting unreferenced inode 426840
[ 7.925134] ext3_orphan_cleanup: deleting unreferenced inode 426406
[ 7.925183] ext3_orphan_cleanup: deleting unreferenced inode 426402
[ 7.925197] ext3_orphan_cleanup: deleting unreferenced inode 426833
[ 7.925336] ext3_orphan_cleanup: deleting unreferenced inode 122889
[ 7.925345] ext3_orphan_cleanup: deleting unreferenced inode 122888
[ 7.925353] ext3_orphan_cleanup: deleting unreferenced inode 122887
[ 7.925360] ext3_orphan_cleanup: deleting unreferenced inode 122886
[ 7.925368] ext3_orphan_cleanup: deleting unreferenced inode 122885
[ 7.925374] EXT3-fs: sda1: 10 orphan inodes deleted
[ 7.925376] EXT3-fs: recovery complete.
[ 7.936537] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.292926] udev: starting version 141
[ 9.389069] ACPI: processor limited to max C-state 1
[ 9.389140] processor ACPI_CPU:00: registered as cooling_device1
[ 9.389147] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 9.389379] processor ACPI_CPU:01: registered as cooling_device2
[ 9.389386] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 9.404524] ACPI: AC Adapter [ACAD] (on-line)
[ 9.442840] ACPI: WMI: Mapper loaded
[ 9.530437] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 9.800855] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 9.800899] ACPI: Power Button [PWRF]
[ 9.800988] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input6
[ 9.808541] ACPI: Lid Switch [LID]
[ 9.869130] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 10.107498] ACPI: Battery Slot [BAT0] (battery present)
[ 10.108138] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input7
[ 10.108239] ACPI: Power Button [PWRB]
[ 10.108319] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input8
[ 10.108348] ACPI: Sleep Button [SLPB]
[ 10.423198] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[ 10.423220] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[ 10.469059] cfg80211: Using static regulatory domain info
[ 10.469062] cfg80211: Regulatory domain: US
[ 10.469064] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.469067] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 10.469070] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.469073] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.469076] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.469079] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 10.469081] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 10.469090] cfg80211: Calling CRDA for country: US
[ 10.682601] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 10.760316] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 10.853263] Linux video capture interface: v2.00
[ 10.940008] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b023)
[ 10.946734] b43-phy0: Broadcom 4311 WLAN found (core revision 13)
[ 10.949014] input: HP Webcam as /devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4:1.0/input/input10
[ 10.949081] usbcore: registered new interface driver uvcvideo
[ 10.949085] USB Video Class driver (v0.1.0)
[ 11.072152] phy0: Selected rate control algorithm 'minstrel'
[ 11.072859] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[ 11.074945] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 11.074952] alloc irq_desc for 21 on cpu 0 node 0
[ 11.074954] alloc kstat_irqs on cpu 0 node 0
[ 11.074967] HDA Intel 0000:00:07.0: PCI INT B -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 11.075020] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 11.580152] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:07.0/input/input11
[ 11.580250] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/input/input12
[ 12.101618] Adding 2096472k swap on /dev/sda3. Priority:-1 extents:1 across:2096472k
[ 12.244167] EXT3 FS on sda1, internal journal
[ 12.344718] loop: module loaded
[ 34.780965] kjournald starting. Commit interval 5 seconds
[ 34.781253] EXT3 FS on sda2, internal journal
[ 34.781258] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.819548] kjournald starting. Commit interval 5 seconds
[ 34.819767] EXT3 FS on sda5, internal journal
[ 34.819771] EXT3-fs: mounted filesystem with ordered data mode.
[ 39.052479] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
[ 39.052551] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12
[ 39.052555] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13
[ 39.052558] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 39.052561] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 39.500035] Clocksource tsc unstable (delta = -241624041 ns)
[ 47.732034] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
powernow_k8 14100 1
cpufreq_stats 4660 0
cpufreq_conservative 7928 0
cpufreq_powersave 1792 0
cpufreq_userspace 3652 0
firewire_sbp2 15424 0
loop 15980 0
snd_hda_codec_conexant 22608 1
snd_hda_intel 26680 1
arc4 2048 2
ecb 3072 2
snd_hda_codec 75264 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 8152 1 snd_hda_codec
snd_pcm_oss 37200 0
snd_mixer_oss 15072 1 snd_pcm_oss
snd_pcm 78504 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
b43 122328 0
uvcvideo 56700 0
snd_seq_midi 6976 0
rfkill 12116 1 b43
snd_rawmidi 23008 1 snd_seq_midi
joydev 10992 0
snd_seq_midi_event 7712 1 snd_seq_midi
rng_core 4872 1 b43
videodev 36784 1 uvcvideo
v4l1_compat 12932 2 uvcvideo,videodev
mac80211 161424 1 b43
snd_seq 51376 2 snd_seq_midi,snd_seq_midi_event
v4l2_compat_ioctl32 9312 1 videodev
snd_timer 21824 2 snd_pcm,snd_seq
snd_seq_device 7476 3 snd_seq_midi,snd_rawmidi,snd_seq
cfg80211 65480 2 b43,mac80211
i2c_nforce2 7864 0
snd 63912 13 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7984 1 snd
i2c_core 25456 1 i2c_nforce2
serio_raw 5844 0
snd_page_alloc 10000 2 snd_hda_intel,snd_pcm
k8temp 5152 0
input_polldev 4544 1 b43
battery 7840 0
button 6512 0
evdev 10448 22
psmouse 42172 0
pcspkr 2800 0
wmi 7488 0
ac 3872 0
processor 40176 1 powernow_k8
ext3 122896 3
jbd 48184 1 ext3
mbcache 8804 1 ext3
usbhid 37344 0
sd_mod 33736 5
crc_t10dif 2096 1 sd_mod
hid 41376 1 usbhid
ide_cd_mod 29048 0
cdrom 34344 1 ide_cd_mod
ata_generic 5924 0
ide_pci_generic 4964 0
ohci_hcd 22812 0
ssb 43872 1 b43
firewire_ohci 22404 0
firewire_core 45028 2 firewire_sbp2,firewire_ohci
crc_itu_t 2720 1 firewire_core
sdhci_pci 8160 0
sdhci 17604 1 sdhci_pci
pcmcia 27640 2 b43,ssb
pcmcia_core 37076 3 b43,ssb,pcmcia
ricoh_mmc 4272 0
mmc_core 55536 1 sdhci
led_class 5048 2 b43,sdhci
video 21900 0
output 3472 1 video
ahci 36480 5
amd74xx 6872 0
ide_core 105152 3 ide_cd_mod,ide_pci_generic,amd74xx
libata 175532 2 ata_generic,ahci
scsi_mod 158800 3 firewire_sbp2,sd_mod,libata
ehci_hcd 33852 0
forcedeth 52700 0
thermal 15936 0
fan 5240 0
thermal_sys 16448 4 processor,video,thermal,fan
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP65 Memory Controller [10de:0444] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation MCP65 LPC Bridge [10de:0442] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 1d00 [size=256]
00:01.1 SMBus [0c05]: nVidia Corporation MCP65 SMBus [10de:0446] (rev a1)
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 3080 [size=64]
Region 4: I/O ports at 3040 [size=64]
Region 5: I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:01.3 Co-processor [0b40]: nVidia Corporation MCP65 SMU [10de:0447] (rev a1)
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 255
Region 0: Memory at f2200000 (32-bit, non-prefetchable) [size=512K]
00:02.0 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller [10de:0454] (rev a3) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f2486000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller [10de:0455] (rev a3) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f2488000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:06.0 Ethernet controller [0200]: nVidia Corporation MCP65 Ethernet [10de:0450] (rev a3)
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f2487000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 30e0 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:07.0 Audio device [0403]: nVidia Corporation MCP65 High Definition Audio [10de:044a] (rev a1)
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at f2480000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:08.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI bridge [10de:0449] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
Memory behind bridge: f2100000-f21fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:09.0 IDE interface [0101]: nVidia Corporation MCP65 IDE [10de:0448] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 30c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
00:0a.0 IDE interface [0101]: nVidia Corporation MCP65 SATA Controller [10de:045d] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 30f8 [size=8]
Region 1: I/O ports at 30ec [size=4]
Region 2: I/O ports at 30f0 [size=8]
Region 3: I/O ports at 30e8 [size=4]
Region 4: I/O ports at 30d0 [size=16]
Region 5: Memory at f2484000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:0b.0 PCI bridge [0604]: nVidia Corporation Device [10de:045b] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge [10de:045a] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f2000000-f20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:0d.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge [10de:0458] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: cc000000-ceffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:0e.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge [10de:0459] (rev a1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 00000000f2600000-00000000f27fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
03:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11a/b/g [14e4:4312] (rev 02)
Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN [103c:1371]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
05:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8400M GS] [10de:0427] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 15
Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 4000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
07:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f2100000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
07:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 7
Region 0: Memory at f2100800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
07:05.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f2100c00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ricoh-mmc
07:05.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:30cf]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 10
Region 0: Memory at f2101000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
07:05.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff)
!!! Unknown header type 7f
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.27 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93.4 tools for generating an initramfs
ii module-init-tools 3.9-2 tools for managing Linux kernel mo
linux-image-2.6.30-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-1-amd64 suggests:
ii grub-pc [grub] 1.96+20090725-1 GRand Unified Bootloader, version
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
linux-image-2.6.30-1-amd64/preinst/initrd-2.6.30-1-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-amd64/postinst/create-kimage-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/abort-overwrite-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/bootloader-error-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-1-amd64/postinst/old-dir-initrd-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/old-initrd-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-1-amd64/preinst/lilo-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/prerm/removing-running-kernel-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/prerm/would-invalidate-boot-loader-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/elilo-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/bootloader-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/overwriting-modules-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/depmod-error-2.6.30-1-amd64: false
linux-image-2.6.30-1-amd64/preinst/failed-to-move-modules-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/depmod-error-initrd-2.6.30-1-amd64: false
linux-image-2.6.30-1-amd64/preinst/abort-install-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/bootloader-test-error-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/old-system-map-link-2.6.30-1-amd64: true
--- End Message ---