Bug#665881: [3.1 -> 3.2.12 regression] module ath5k is blocking wlan-card
Hi Jonathan,
it is me again! Sorry, but obviously this bug is not gone, and IMO it should
be reopened.
Today I got the same problem again, and could fix it with the already mentioned
power-off-trick.
Below I added two dmesg-logs, one is called "dmesg", which is the troubled
one, the other is called "dmesg-ok.txt", that one is after "power-off and
working" one.
Hope this helps!
Kind regards
Hans
304032] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 35.304043] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 35.316030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 35.316037] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 35.316045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 35.444030] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 35.516031] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 35.516039] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 35.516046] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 35.516054] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 35.516061] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 35.644039] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 35.700031] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 35.700039] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 35.700045] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 35.756032] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 35.756046] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 35.768031] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 35.768041] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 35.768050] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 35.896033] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 35.968029] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 35.968040] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 35.968048] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 35.968058] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 35.968067] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 36.100030] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 36.156027] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 36.156035] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 36.156054] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 36.212028] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 36.212042] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 36.224027] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 36.224036] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 36.224045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 36.352026] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 36.424032] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 36.424040] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 36.424046] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 36.424053] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 36.424061] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 36.552038] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 36.612040] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 36.612047] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 36.612066] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 36.668030] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 36.668044] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 36.680027] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 36.680036] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 36.680044] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 36.808034] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 36.884037] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 36.884053] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 36.884060] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 36.884071] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 36.884080] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 37.012040] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 37.068030] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 37.068037] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 37.068057] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 37.124029] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 37.124044] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 37.136027] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 37.136036] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 37.136045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 37.264026] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 37.336026] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 37.336035] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 37.336042] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 37.336049] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 37.336057] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 37.464027] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 37.520027] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 37.520033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 37.520049] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 37.576048] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 37.576066] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 37.588049] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 37.588064] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 37.588076] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 37.716030] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 37.788030] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 37.788042] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 37.788048] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 37.788059] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 37.788067] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 37.916039] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 37.972030] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 37.972038] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 37.972044] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 38.028044] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 38.028065] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 38.040034] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 38.040044] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 38.040052] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 38.168030] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 38.240031] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 38.240040] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 38.240046] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 38.240054] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 38.240062] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 38.368028] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 38.424033] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 38.424040] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 38.424046] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 38.480032] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 38.480043] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 38.492030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 38.492037] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 38.492045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 38.620034] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 38.692030] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 38.692042] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 38.692049] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 38.692059] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 38.692068] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 38.820037] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 38.876030] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 38.876037] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 38.876043] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 38.932033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 38.932046] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 38.944030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 38.944038] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 38.944047] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 39.072038] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 39.144030] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 39.144042] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 39.144049] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 39.144060] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 39.144070] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 39.272031] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 39.328030] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 39.328036] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 39.328042] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 39.384033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 39.384046] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 39.396030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 39.396038] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 39.396045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 39.524033] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 39.596045] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 39.596063] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 39.596070] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 39.596081] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 39.596090] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 39.724029] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 39.780031] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 39.780037] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 39.780043] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 39.836033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 39.836046] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 39.848030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 39.848041] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 39.848050] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 39.976033] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 40.048044] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 40.048061] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 40.048070] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 40.048081] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 40.048090] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 40.176029] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 40.232030] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 40.232037] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 40.232042] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 40.288044] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 40.288057] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 40.300029] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 40.300038] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 40.300045] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 40.428034] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 40.500031] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 40.500039] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 40.500045] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 40.500053] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 40.500060] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 40.628036] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 40.684034] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 40.684041] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 40.684047] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 40.740033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 40.740047] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 40.752031] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 40.752040] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 40.752049] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 40.880031] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 40.952033] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 40.952043] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 40.952050] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 40.952058] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 40.952067] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 41.080034] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 41.136029] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 41.136037] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 41.136043] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 41.192035] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 41.192054] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 41.208031] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 41.208042] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 41.208051] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 41.336026] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 41.408028] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 41.408040] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 41.409248] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 41.409258] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 41.409266] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 41.536025] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 41.592037] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 41.592046] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 41.592055] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 41.648027] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 41.648043] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 41.660026] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 41.660035] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 41.660043] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 41.788026] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 41.860049] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 41.860067] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 41.861263] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 41.861274] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 41.861283] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 41.988027] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 42.044041] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 42.044049] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 42.044058] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 42.100027] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 42.100043] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 42.112026] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 42.112035] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 42.112043] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 42.240025] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 42.312028] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 42.312037] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 42.313145] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 42.313153] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 42.313161] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 42.440026] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 42.496025] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 42.496032] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 42.496037] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 42.552027] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 42.552038] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 42.564044] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 42.564059] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 42.564070] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 42.692025] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 42.764026] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 42.764038] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 42.765133] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 42.765143] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 42.765151] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 42.892029] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 42.948026] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 42.948033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 42.948039] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 43.004027] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 43.004042] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 43.016241] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 43.016256] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 43.016267] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 43.144030] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 43.216027] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 43.216039] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 43.217079] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 43.217090] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 43.217099] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 43.344025] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 43.400026] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 43.400032] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 43.400038] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 43.456027] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 43.456039] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 43.468025] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 43.468033] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 43.468041] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 43.596044] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 43.668026] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 43.668038] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 43.668959] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 43.668970] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 43.668978] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 43.800039] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 43.860032] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 43.860041] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 43.860061] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 43.916061] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 43.916081] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 43.928041] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 43.928056] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 43.928081] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 44.056047] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 44.128088] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 44.128107] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 44.129246] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 44.129258] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 44.129267] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 44.256055] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 44.312039] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 44.312048] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 44.312057] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 44.368076] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 44.368097] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 44.378376] loop: module loaded
[ 44.380590] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 44.380604] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 44.380615] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 44.447768] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 (2 cpu cores) (version 2.20.00)
[ 44.447833] powernow-k8: fid 0xb (1900 MHz), vid 0x11
[ 44.447837] powernow-k8: fid 0xa (1800 MHz), vid 0x12
[ 44.447840] powernow-k8: fid 0x8 (1600 MHz), vid 0x13
[ 44.447843] powernow-k8: fid 0x0 (800 MHz), vid 0x1e
[ 44.508062] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 44.580157] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 44.580178] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 44.581527] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 44.581540] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 44.581551] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 44.708595] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 44.764047] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 44.764058] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 44.764086] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 44.820048] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 44.820072] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 44.832053] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 44.832069] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 44.832082] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 44.960082] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 45.032145] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 45.032185] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 45.034313] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 45.034338] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 45.034359] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 45.160107] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 45.216053] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 45.216072] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 45.216086] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 45.272121] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 45.272164] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 45.288044] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 45.288068] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 45.288091] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 45.416091] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 45.492046] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 45.492075] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 45.494299] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 45.494323] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 45.494342] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 45.620082] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 45.676051] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 45.676070] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 45.676086] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 45.732076] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 45.732116] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 45.744048] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 45.744070] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 45.744091] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 45.872064] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 45.944066] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 45.944097] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 45.946371] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 45.946396] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 45.946416] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 46.072065] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 46.128087] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 46.128109] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 46.128127] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 46.184064] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 46.184100] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 46.196052] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 46.196075] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 46.196096] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 46.324070] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 46.396062] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 46.396100] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 46.398534] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 46.398562] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 46.398582] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 46.524095] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 46.580066] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 46.580087] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 46.580125] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 46.636066] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 46.636109] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 46.648098] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 46.648130] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 46.648154] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 46.776076] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 46.848066] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 46.848105] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 46.850667] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 46.850691] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 46.850710] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 46.931674] EXT3-fs: barriers not enabled
[ 46.932172] kjournald starting. Commit interval 5 seconds
[ 46.940304] EXT3-fs (dm-0): using internal journal
[ 46.940323] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 46.960565] EXT3-fs: barriers not enabled
[ 46.961035] kjournald starting. Commit interval 5 seconds
[ 46.961584] EXT3-fs (dm-1): using internal journal
[ 46.961599] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 46.974094] EXT3-fs: barriers not enabled
[ 46.974543] kjournald starting. Commit interval 5 seconds
[ 46.975052] EXT3-fs (dm-2): using internal journal
[ 46.975067] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 46.984102] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 47.040064] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 47.040085] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 47.040124] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 47.096113] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 47.096157] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 47.108075] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 47.108282] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 47.108308] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 47.236092] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 47.313678] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 47.313715] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 47.316381] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 47.316407] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 47.316428] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 47.444049] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 47.500079] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 47.500098] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 47.500139] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 47.556132] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 47.556173] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 47.572052] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 47.572079] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 47.572104] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 47.708080] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 47.780075] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 47.780113] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 47.785801] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 47.785827] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 47.785847] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 47.916074] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 47.972109] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 47.972131] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 47.972151] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 48.028097] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 48.028138] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 48.040050] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 48.040072] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 48.040093] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 48.168071] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 48.240057] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 48.240086] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 48.243059] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 48.243086] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 48.243106] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 48.368062] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 48.424081] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 48.424101] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 48.424139] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 48.480078] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 48.480118] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 48.496062] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 48.496087] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 48.496110] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 48.624100] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 48.696073] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 48.696109] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 48.699123] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 48.699148] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 48.699171] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 48.824070] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 48.880060] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 48.880080] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 48.880099] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 48.936118] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 48.936160] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 48.952096] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 48.952128] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 48.952153] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 49.080070] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 49.152723] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 49.152764] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 49.155922] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 49.155946] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 49.155966] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 49.281327] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 49.340092] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 49.340113] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 49.340132] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 49.396169] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 49.396217] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 49.408197] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 49.408229] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 49.408254] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 49.536143] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 49.608096] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 49.608115] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 49.610092] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 49.610104] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 49.610114] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 49.740066] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 49.796051] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 49.796062] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 49.796087] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 49.804455] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 49.856035] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 49.856058] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 49.872030] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 49.872042] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 49.872053] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 50.004062] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 50.076105] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 50.076143] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 50.079792] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 50.079817] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 50.079836] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 50.208062] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 50.264056] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 50.264074] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 50.264104] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 50.320066] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 50.320103] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 50.332057] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 50.332079] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 50.332101] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 50.460049] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 50.532064] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 50.532096] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 50.535437] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 50.535464] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 50.535485] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 50.664047] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 50.720065] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 50.720085] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 50.720104] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 50.776052] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 50.776089] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 50.788057] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 50.788078] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 50.788101] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 50.972505] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1)
[ 50.975008] wlan0: authenticated
[ 50.975025] wlan0: associate with 00:06:25:ed:1f:e7 (try 1)
[ 50.978692] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=1)
[ 50.978696] wlan0: associated
[ 50.979356] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 51.000032] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 51.072049] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 51.072066] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 51.073916] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 51.073927] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 51.073936] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 51.200081] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 51.256049] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 51.256066] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 51.256081] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 51.312085] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 51.312119] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 51.324072] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 51.324098] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 51.324121] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 51.452061] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 51.524064] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 51.524101] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 51.527244] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 51.527269] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 51.527288] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 51.652063] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 51.708065] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 51.708085] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 51.708102] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 51.764080] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 51.764113] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 51.776058] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 51.776081] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 51.776103] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 51.904054] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 51.976060] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 51.976099] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 51.979158] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 51.979184] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 51.979204] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 52.104072] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 52.160137] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 52.160158] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 52.160178] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 52.216090] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 52.216134] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 52.228050] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 52.228075] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 52.228096] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 52.356068] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 52.428091] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 52.428130] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 52.431034] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 52.431061] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 52.431082] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 52.556125] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 52.612055] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 52.612074] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 52.612090] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 52.668062] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 52.668098] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 52.680046] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 52.680067] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 52.680090] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 52.808098] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 52.880360] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 52.880394] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 52.883187] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 52.883212] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 52.883233] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 53.008061] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 53.064066] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 53.064083] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 53.064097] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 53.120083] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 53.120121] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 53.132087] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 53.132108] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 53.132129] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 53.260098] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 53.332098] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 53.332138] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 53.333288] forcedeth 0000:00:0a.0: irq 43 for MSI/MSI-X
[ 53.333536] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 53.335028] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 53.335284] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 53.335309] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 53.335328] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 53.464073] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 53.520040] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 53.520059] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 53.520096] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 53.580098] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 53.580141] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 53.592119] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 53.592151] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 53.592178] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 53.724090] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 53.796090] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 53.796131] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 53.798789] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 53.798815] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 53.798834] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 53.924070] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 53.980074] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 53.980096] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 53.980140] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 54.036066] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 54.036108] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 54.052065] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 54.052092] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 54.052115] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 54.180065] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 54.252094] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 54.252133] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 54.256858] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 54.256883] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 54.256902] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 54.384100] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 54.440069] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 54.440091] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 54.440111] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 54.496142] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 54.496185] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 54.512082] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 54.512115] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 54.512141] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 54.640103] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 54.712087] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 54.712129] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 54.714599] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 54.714626] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 54.714646] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 54.824018] CE: hpet increased min_delta_ns to 11520 nsec
[ 54.840092] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 54.896078] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 54.896098] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 54.896141] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 54.952083] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 54.952124] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 54.968058] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 54.968089] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 54.968113] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 55.096122] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 55.176164] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 55.176204] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 55.178877] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 55.178903] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 55.178922] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 55.308087] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 55.364069] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 55.364090] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 55.364110] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 55.420146] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 55.420186] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 55.436081] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 55.436113] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 55.436139] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 55.564098] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 55.636109] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 55.636147] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 55.636280] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 55.636306] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 55.636325] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 55.768107] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 55.824107] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 55.824127] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 55.824170] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 55.884095] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 55.884137] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 55.896091] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 55.896114] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 55.896137] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 56.028052] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 56.100043] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 56.100060] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 56.100133] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 56.100145] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 56.100154] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 56.228093] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 56.284080] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 56.284099] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 56.284141] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 56.340087] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 56.340131] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 56.356083] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 56.356109] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 56.356133] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 56.488078] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 56.560061] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 56.560101] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 56.562859] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 56.562883] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 56.562903] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 56.688047] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 56.744026] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 56.744033] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 56.744052] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 56.804059] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 56.804082] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 56.816046] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 56.816063] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 56.816077] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 56.948095] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 57.020087] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 57.020127] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 57.023265] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 57.023290] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 57.023310] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 57.152062] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 57.208096] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 57.208118] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 57.208158] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 57.220750] fuse init (API version 7.16)
[ 57.268088] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 57.268130] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 57.280060] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 57.280082] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 57.280104] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 57.408059] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 57.480069] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 57.480102] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 57.483160] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 57.483186] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 57.483207] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 57.608063] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 57.664056] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 57.664075] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 57.664089] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 57.724121] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 57.724164] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 57.736115] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 57.736139] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 57.736160] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 57.864057] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 57.936081] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 57.936116] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 57.939678] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 57.939705] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 57.939725] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 58.064086] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 58.120077] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 58.120099] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 58.120120] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 58.176068] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 58.176110] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 58.188081] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 58.188109] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 58.188133] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 58.317742] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 58.388099] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 58.388118] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 58.390084] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 58.390095] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 58.390105] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 58.516047] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 58.572076] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 58.572097] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 58.572117] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 58.628075] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 58.628118] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 58.640079] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 58.640103] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 58.640125] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 58.768096] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 58.840069] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 58.840104] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 58.843649] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 58.843674] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 58.843694] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 58.868158] NET: Registered protocol family 23
[ 58.968071] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 59.024049] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 59.024067] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 59.024100] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 59.080087] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 59.080129] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 59.092049] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 59.092069] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 59.092089] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 59.220064] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 59.292058] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 59.292097] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 59.295720] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 59.295744] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 59.295764] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 59.420073] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 59.476053] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 59.476072] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 59.476087] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 59.532072] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 59.532112] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 59.544064] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 59.544088] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 59.544110] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 59.676069] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 59.718732] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 59.748191] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 59.748233] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 59.751855] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 59.751880] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 59.751899] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 59.876055] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 59.932062] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 59.932082] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 59.932100] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 59.988063] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 59.988097] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 60.000060] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 60.000084] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 60.000106] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 60.128071] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 60.200091] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 60.200129] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 60.203588] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 60.203614] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 60.203634] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 60.328097] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 60.384078] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 60.384099] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 60.384139] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 60.440058] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 60.440100] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 60.452043] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 60.452064] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 60.452086] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 60.580044] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 60.656050] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 60.656079] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 60.659293] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 60.659318] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 60.659337] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 60.784060] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 60.844069] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 60.844090] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 60.844110] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 60.900083] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 60.900125] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 60.912042] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 60.912067] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 60.912088] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 61.040075] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 61.112139] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 61.112179] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 61.115508] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 61.115533] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 61.115553] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 61.240161] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 61.296049] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 61.296069] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 61.296089] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 61.352103] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 61.352146] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 61.364065] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 61.364093] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 61.364117] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 61.500070] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 61.576163] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 61.576203] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 61.579499] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 61.579524] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 61.579543] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 61.676024] wlan0: no IPv6 routers present
[ 61.708123] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 61.768082] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 61.768103] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 61.768123] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 61.824460] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 61.824501] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 61.840076] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 61.840100] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 61.840122] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 61.972105] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 62.044076] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 62.044114] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 62.047573] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 62.047599] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 62.047619] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 62.172080] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 62.228088] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 62.228108] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 62.228123] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 62.284098] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 62.284140] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 62.300077] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 62.300110] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 62.300134] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 62.432093] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 62.504109] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 62.504150] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 62.507824] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 62.507850] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 62.507869] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 62.632094] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 62.688062] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 62.688082] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 62.688101] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 62.744080] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 62.744116] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 62.756050] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 62.756071] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 62.756093] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 62.884071] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 62.956071] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 62.956112] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 62.959583] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 62.959609] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 62.959629] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 63.088085] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 63.144139] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 63.144161] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 63.144181] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 63.200774] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 63.200815] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 63.216074] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 63.216106] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 63.216133] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 63.344089] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 63.416167] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 63.416209] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 63.420459] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 63.420486] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 63.420506] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 63.548092] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 63.604074] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 63.604096] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 63.604116] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 63.660069] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 63.660104] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 63.672067] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 63.672097] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 63.672121] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 63.800065] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 63.872100] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 63.872138] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 63.875445] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 63.875470] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 63.875491] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 64.004091] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 64.060062] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 64.060081] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 64.060112] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 64.116047] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 64.116081] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 64.128053] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 64.128076] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 64.128098] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 64.260097] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 64.332097] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 64.332135] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 64.338678] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 64.338705] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 64.338725] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 64.464090] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 64.520055] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 64.520075] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 64.520091] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 64.576057] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 64.576092] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 64.588083] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 64.588104] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 64.588125] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 64.716065] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 64.788058] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 64.788087] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 64.791266] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 64.791290] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 64.791309] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 64.916068] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 64.972065] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 64.972083] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 64.972098] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 65.028061] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 65.028093] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 65.040062] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 65.040082] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 65.040104] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 65.168059] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 65.240087] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 65.240121] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 65.243258] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 65.243285] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 65.243304] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 65.368070] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 65.424057] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 65.424075] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 65.424089] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 65.480079] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 65.480123] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 65.492049] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 65.492074] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 65.492097] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 65.620055] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 65.692060] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 65.692099] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 65.695172] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 65.695198] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 65.695219] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 65.820075] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 65.876100] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 65.876121] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 65.876141] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 65.932086] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 65.932127] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 65.944075] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 65.944104] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 65.944129] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 66.072068] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 66.148078] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 66.148117] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 66.151362] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 66.151388] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 66.151408] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 66.276059] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 66.332071] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 66.332092] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 66.332132] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 66.392075] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 66.392118] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 66.404080] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 66.404111] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 66.404138] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 66.532054] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 66.604063] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 66.604094] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 66.607324] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 66.607348] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 66.607368] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 66.732067] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 66.788049] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 66.788069] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 66.788106] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 66.845042] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 66.845084] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 66.860044] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 66.860069] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 66.860091] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 66.992072] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 67.064082] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 67.064124] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 67.067242] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 67.067267] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 67.067286] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 67.196068] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 67.252049] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 67.252067] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 67.252100] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 67.308047] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 67.308081] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 67.324083] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 67.324114] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 67.324140] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 67.452052] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 67.524062] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 67.524100] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 67.527326] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 67.527352] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 67.527373] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 67.652062] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 67.708072] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 67.708093] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 67.708136] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 67.768069] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 67.768115] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 67.784051] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 67.784076] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 67.784101] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 67.916060] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 67.988056] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 67.988092] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 67.991347] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 67.991372] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 67.991392] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 68.120057] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 68.176112] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 68.176132] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 68.176171] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 68.232069] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 68.232109] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 68.244068] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 68.244102] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 68.244128] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 68.372062] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 68.444055] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 68.444094] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 68.447479] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 68.447505] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 68.447528] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 68.576054] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 68.632054] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 68.632074] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 68.632115] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 68.688069] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 68.688109] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 68.700041] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 68.700063] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 68.700085] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 68.832064] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 68.908092] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 68.908132] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 68.911054] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 68.911079] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 68.911098] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 69.040095] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 69.096081] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 69.096103] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 69.096122] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 69.152076] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 69.152118] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 69.164053] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 69.164074] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 69.164096] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 69.292061] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 69.364071] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 69.364106] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 69.366822] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 69.366846] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 69.366866] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 69.496056] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 69.552062] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 69.552082] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 69.552120] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 69.608113] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 69.608158] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 69.620229] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 69.620260] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 69.620285] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 69.752061] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 69.824715] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 69.824755] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 69.827378] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 69.827403] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 69.827422] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 69.952067] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 70.008051] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 70.008071] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 70.008108] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 70.064069] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 70.064110] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 70.076050] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 70.076075] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 70.076096] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 70.208071] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 70.280134] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 70.280176] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 70.282905] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 70.282932] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 70.282953] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 70.408097] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 70.464064] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 70.464084] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 70.464102] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 70.520109] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 70.520150] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 70.532117] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 70.532149] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 70.532176] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 70.660054] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 70.732074] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 70.732113] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 70.734611] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 70.734636] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 70.734655] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 70.860049] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 70.916057] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 70.916077] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 70.916113] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 70.972073] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 70.972109] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 70.984047] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 70.984068] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 70.984089] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 71.116057] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 71.188088] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 71.188127] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 71.190369] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 71.190395] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 71.190416] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 71.316059] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 71.372093] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 71.372115] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 71.372135] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 71.428079] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 71.428122] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 71.440055] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 71.440081] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 71.440103] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 71.568095] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 71.640075] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 71.640113] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 71.642379] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 71.642404] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 71.642424] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 71.768083] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 71.824065] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 71.824086] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 71.824107] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 71.880075] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 71.880116] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 71.892062] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 71.892084] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 71.892105] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 72.020063] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 72.092051] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 72.092082] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 72.094165] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 72.094189] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 72.094211] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 72.220078] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 72.276067] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 72.276088] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 72.276125] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 72.332055] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 72.332091] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 72.344050] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 72.344070] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 72.344093] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 72.476147] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 72.548088] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 72.548129] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 72.550144] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 72.550170] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 72.550189] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 72.676075] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 72.736063] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 72.736084] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 72.736122] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 72.792067] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 72.792111] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 72.804050] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 72.804076] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 72.804097] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 72.936060] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 73.008058] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 73.008092] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 73.012174] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 73.012199] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 73.012218] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 73.140057] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 73.196095] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 73.196117] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 73.196137] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 73.252075] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 73.252117] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 73.264045] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 73.264066] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 73.264086] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 73.392055] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 73.464063] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 73.464099] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 73.466159] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 73.466183] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 73.466203] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 73.592053] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 73.648049] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 73.648069] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 73.648103] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 73.704064] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 73.704101] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 73.716042] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 73.716064] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 73.716085] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 73.844079] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 73.916083] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 73.916121] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 73.918172] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 73.918197] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 73.918216] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 74.044064] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 74.100055] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 74.100075] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 74.100112] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 74.156058] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 74.156098] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 74.168040] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 74.168061] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 74.168082] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 74.300091] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 74.372964] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 74.373004] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 74.374981] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 74.375007] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 74.375028] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 74.500054] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 74.556052] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 74.556070] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 74.556105] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 74.615235] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 74.615279] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 74.628051] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 74.628073] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 74.628095] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 74.756066] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 74.828063] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 74.828098] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 74.830006] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 74.830031] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 74.830052] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 74.956102] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 75.012979] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 75.013000] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 75.013021] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 75.068137] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 75.068180] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 75.080063] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 75.080088] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 75.080111] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 75.208054] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 75.280062] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 75.280102] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 75.282054] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 75.282079] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 75.282098] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 75.408079] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 75.464107] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 75.464130] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 75.464150] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 75.520542] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 75.520583] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 75.532048] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 75.532072] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 75.532094] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 75.660097] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 75.732062] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 75.732102] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 75.733943] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 75.733967] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 75.733987] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 75.864068] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 75.920061] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 75.920082] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 75.920121] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 75.976079] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 75.976122] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 75.988068] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 75.988089] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 75.988109] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 76.116061] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 76.188052] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 76.188088] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 76.189771] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 76.189797] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 76.189817] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 76.316065] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 76.372056] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 76.372076] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 76.372115] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 76.428073] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 76.428116] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 76.440042] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 76.440064] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 76.440086] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 76.572063] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 76.644081] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 76.644124] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 76.645803] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 76.645828] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 76.645849] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 76.772087] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 76.828064] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 76.828084] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 76.828123] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 76.884070] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 76.884110] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 76.896045] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 76.896069] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 76.896092] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 77.028124] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 77.100088] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 77.100128] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 77.101606] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 77.101630] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 77.101649] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 77.228100] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 77.284078] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 77.284098] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 77.284135] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 77.340092] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 77.340137] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 77.352075] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 77.352106] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 77.352131] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 77.480063] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 77.552066] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 77.552104] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 77.553412] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 77.553437] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 77.553456] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 77.680059] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 77.736055] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 77.736076] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 77.736115] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 77.792059] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 77.792100] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 77.804050] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 77.804071] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 77.804091] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 77.932075] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 78.004053] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 78.004091] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 78.005432] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 78.005456] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 78.005475] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 78.132058] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 78.188067] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 78.188089] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 78.188110] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 78.244085] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 78.244130] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 78.256050] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 78.256072] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 78.256092] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 78.384076] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 78.456078] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 78.456120] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 78.457448] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 78.457473] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 78.457492] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 78.584117] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 78.640058] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 78.640079] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 78.640120] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 78.696066] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 78.696110] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 78.708058] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 78.708080] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 78.708102] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 78.836106] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 78.908072] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 78.908112] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 78.909404] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 78.909429] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 78.909448] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 79.036082] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 79.092060] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 79.092080] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 79.092116] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 79.148058] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 79.148096] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 79.160040] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 79.160062] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 79.160086] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 79.288073] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 79.360088] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 79.360135] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 79.361448] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 79.361472] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 79.361491] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 79.488071] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 79.544226] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 79.544247] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 79.544287] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 79.600123] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 79.600167] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 79.612146] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 79.612177] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 79.612202] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 79.740086] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 79.812059] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 79.812097] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 79.813368] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 79.813394] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 79.813416] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 79.948077] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 80.004069] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 80.004089] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 80.004126] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 80.060121] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 80.060164] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 80.072117] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 80.072146] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 80.072172] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 80.200115] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 80.272093] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 80.272134] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 80.273254] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 80.273282] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 80.273304] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 80.400082] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 80.456087] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 80.456108] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 80.456146] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 80.512060] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 80.512101] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 80.524094] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 80.524126] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 80.524153] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 80.652063] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 80.724053] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 80.724091] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 80.725227] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 80.725252] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 80.725271] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 80.852102] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 80.908061] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 80.908081] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 80.908120] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 80.964080] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 80.964124] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 80.976062] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 80.976092] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 80.976116] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 81.108137] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 81.180166] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 81.180206] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 81.182640] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 81.182665] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 81.182684] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 81.308032] hub 1-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501
[ 81.364069] ehci_hcd 0000:00:02.1: port 6 full speed --> companion
[ 81.364090] ehci_hcd 0000:00:02.1: GetStatus port:6 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
[ 81.364131] hub 1-0:1.0: port 6 not reset yet, waiting 50ms
[ 81.420061] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 81.420102] hub 1-0:1.0: unable to enumerate USB device on port 6
[ 81.432045] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 81.432068] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00030301 PESC CSC LSDA PPS CCS
[ 81.432089] hub 3-0:1.0: port 6, status 0301, change 0003, 1.5 Mb/s
[ 81.442069] lp: driver loaded but no devices found
[ 81.568063] hub 3-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x301
[ 81.630669] ppdev: user-space parallel port driver
[ 81.640054] ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [5] = 0x00130300 PRSC PESC CSC LSDA PPS
[ 81.640090] hub 3-0:1.0: unable to enumerate USB device on port 6
[ 81.641733] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0040
[ 81.641760] ehci_hcd 0000:00:02.1: GetStatus port:6 status 001c03 0 ACK POWER sig=? CSC CONNECT
[ 81.641780] hub 1-0:1.0: port 6, status 0501, change 0001, 480 Mb/s
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.12-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Tue Mar 20 18:36:37 UTC 2012
[ 0.000000] Command line: root=UUID=f2f57267-0289-412c-9f9b-e8702e8b7010 ro quiet vga=791
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff50000 (usable)
[ 0.000000] BIOS-e820: 000000007ff50000 - 000000007ff65000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff65000 - 000000007ff66000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ff66000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Acer Aspire 7520G /Fuquene, BIOS V1.32 03/06/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7ff50 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f7c90] f7c90
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ff50000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ff50000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ff50000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 371d1000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7ca0 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 000000007ff5e30f 0005C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
[ 0.000000] ACPI: SLIC 000000007ff64a8c 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000)
[ 0.000000] ACPI: FACP 000000007ff64c02 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 000000007ff5e36b 066AD (v01 NVIDIA MCP67 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000007ff65fc0 00040
[ 0.000000] ACPI: SSDT 000000007ff64cf6 00206 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 000000007ff64efc 0003C (v01 Nvidia NVDAACPI 06040000 NVDA 00000000)
[ 0.000000] ACPI: HPET 000000007ff64f38 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000007ff64f70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000007ff64fd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ff50000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007ff50000
[ 0.000000] NODE_DATA [000000007ff4b000 - 000000007ff4ffff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007ff50
[ 0.000000] On node 0 totalpages: 523998
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7110 pages used for memmap
[ 0.000000] DMA32 zone: 512906 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s82304 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516827
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=f2f57267-0289-412c-9f9b-e8702e8b7010 ro quiet vga=791
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b060000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 2044120k/2096448k available (3402k kernel code, 456k absent, 51872k reserved, 3330k data, 568k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1900.244 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3800.48 BogoMIPS (lpj=7600976)
[ 0.004013] pid_max: default: 32768 minimum: 301
[ 0.004083] Security Framework initialized
[ 0.004089] AppArmor: AppArmor disabled by boot time parameter
[ 0.004356] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.005704] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.006332] Mount-cache hash table entries: 256
[ 0.008092] Initializing cgroup subsys cpuacct
[ 0.008098] Initializing cgroup subsys memory
[ 0.008117] Initializing cgroup subsys devices
[ 0.008120] Initializing cgroup subsys freezer
[ 0.008125] Initializing cgroup subsys net_cls
[ 0.008127] Initializing cgroup subsys blkio
[ 0.008140] Initializing cgroup subsys perf_event
[ 0.008179] tseg: 007ff80000
[ 0.008181] CPU: Physical Processor ID: 0
[ 0.008183] CPU: Processor Core ID: 0
[ 0.008186] mce: CPU supports 5 MCE banks
[ 0.008198] using AMD E400 aware idle routine
[ 0.008586] ACPI: Core revision 20110623
[ 0.016621] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058249] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-58 stepping 01
[ 0.060003] Performance Events: AMD PMU driver.
[ 0.060003] ... version: 0
[ 0.060003] ... bit width: 48
[ 0.060003] ... generic registers: 4
[ 0.060003] ... value mask: 0000ffffffffffff
[ 0.060003] ... max period: 00007fffffffffff
[ 0.060003] ... fixed-purpose events: 0
[ 0.060003] ... event mask: 000000000000000f
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 99000
[ 0.144131] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.144117] System has AMD C1E enabled
[ 0.144160] Brought up 2 CPUs
[ 0.144164] Total of 2 processors activated (7601.01 BogoMIPS).
[ 0.144158] Switch to broadcast mode on CPU1
[ 0.144794] Switch to broadcast mode on CPU0
[ 0.144794] devtmpfs: initialized
[ 0.148028] PM: Registering ACPI NVS region at 7ff65000 (4096 bytes)
[ 0.148247] print_constraints: dummy:
[ 0.148336] NET: Registered protocol family 16
[ 0.148495] node 0 link 0: io port [1000, fffff]
[ 0.148499] TOM: 0000000080000000 aka 2048M
[ 0.148503] node 0 link 0: mmio [a0000, bffff]
[ 0.148507] node 0 link 0: mmio [80000000, dfffffff]
[ 0.148510] node 0 link 0: mmio [e0000000, efffffff]
[ 0.148513] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.148517] bus: [00, ff] on node 0 link 0
[ 0.148521] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.148524] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.148527] bus: 00 index 2 [mem 0x80000000-0xfcffffffff]
[ 0.148540] ACPI: bus type pci registered
[ 0.148643] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.148648] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.172737] PCI: Using configuration type 1 for base access
[ 0.173758] bio: create slab <bio-0> at 0
[ 0.173758] ACPI: Added _OSI(Module Device)
[ 0.173758] ACPI: Added _OSI(Processor Device)
[ 0.173758] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.173758] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.173758] ACPI: EC: Look up EC in DSDT
[ 0.180191] ACPI: Interpreter enabled
[ 0.180197] ACPI: (supports S0 S3 S4 S5)
[ 0.180224] ACPI: Using IOAPIC for interrupt routing
[ 0.247515] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.247783] ACPI: No dock devices found.
[ 0.247786] HEST: Table not found.
[ 0.247791] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.247994] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.248202] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.248206] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.248210] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.248214] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.248218] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.248221] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.248224] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.248228] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.248231] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.248234] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.248237] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.248241] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.248244] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.248247] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.248251] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.248254] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.248257] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.248261] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.248272] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cd9ff])
[ 0.248304] pci 0000:00:00.0: [10de:0547] type 0 class 0x000500
[ 0.248486] pci 0000:00:01.0: [10de:0548] type 0 class 0x000601
[ 0.248494] pci 0000:00:01.0: reg 10: [io 0x1d00-0x1dff]
[ 0.248535] pci 0000:00:01.1: [10de:0542] type 0 class 0x000c05
[ 0.248547] pci 0000:00:01.1: reg 10: [io 0x3080-0x30bf]
[ 0.248564] pci 0000:00:01.1: reg 20: [io 0x3040-0x307f]
[ 0.248571] pci 0000:00:01.1: reg 24: [io 0x3000-0x303f]
[ 0.248601] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.248608] pci 0000:00:01.1: PME# disabled
[ 0.248623] pci 0000:00:01.2: [10de:0541] type 0 class 0x000500
[ 0.248675] pci 0000:00:01.3: [10de:0543] type 0 class 0x000b40
[ 0.248692] pci 0000:00:01.3: reg 10: [mem 0xd0600000-0xd067ffff]
[ 0.248809] pci 0000:00:02.0: [10de:055e] type 0 class 0x000c03
[ 0.248819] pci 0000:00:02.0: reg 10: [mem 0xd0886000-0xd0886fff]
[ 0.248856] pci 0000:00:02.0: supports D1 D2
[ 0.248859] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.248863] pci 0000:00:02.0: PME# disabled
[ 0.248880] pci 0000:00:02.1: [10de:055f] type 0 class 0x000c03
[ 0.248892] pci 0000:00:02.1: reg 10: [mem 0xd0889000-0xd08890ff]
[ 0.248936] pci 0000:00:02.1: supports D1 D2
[ 0.248939] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.248943] pci 0000:00:02.1: PME# disabled
[ 0.248966] pci 0000:00:04.0: [10de:055e] type 0 class 0x000c03
[ 0.248977] pci 0000:00:04.0: reg 10: [mem 0xd0887000-0xd0887fff]
[ 0.249013] pci 0000:00:04.0: supports D1 D2
[ 0.249016] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249021] pci 0000:00:04.0: PME# disabled
[ 0.249037] pci 0000:00:04.1: [10de:055f] type 0 class 0x000c03
[ 0.249049] pci 0000:00:04.1: reg 10: [mem 0xd0889400-0xd08894ff]
[ 0.249093] pci 0000:00:04.1: supports D1 D2
[ 0.249096] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249100] pci 0000:00:04.1: PME# disabled
[ 0.249123] pci 0000:00:06.0: [10de:0560] type 0 class 0x000101
[ 0.249147] pci 0000:00:06.0: reg 20: [io 0x30c0-0x30cf]
[ 0.249184] pci 0000:00:07.0: [10de:055c] type 0 class 0x000403
[ 0.249196] pci 0000:00:07.0: reg 10: [mem 0xd0880000-0xd0883fff]
[ 0.249242] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.249245] pci 0000:00:07.0: PME# disabled
[ 0.249269] pci 0000:00:08.0: [10de:0561] type 1 class 0x000604
[ 0.249316] pci 0000:00:09.0: [10de:0550] type 0 class 0x000101
[ 0.249327] pci 0000:00:09.0: reg 10: [io 0x30f0-0x30f7]
[ 0.249333] pci 0000:00:09.0: reg 14: [io 0x30e4-0x30e7]
[ 0.249339] pci 0000:00:09.0: reg 18: [io 0x30e8-0x30ef]
[ 0.249344] pci 0000:00:09.0: reg 1c: [io 0x30e0-0x30e3]
[ 0.249350] pci 0000:00:09.0: reg 20: [io 0x30d0-0x30df]
[ 0.249356] pci 0000:00:09.0: reg 24: [mem 0xd0884000-0xd0885fff]
[ 0.249402] pci 0000:00:0a.0: [10de:054c] type 0 class 0x000200
[ 0.249414] pci 0000:00:0a.0: reg 10: [mem 0xd0888000-0xd0888fff]
[ 0.249420] pci 0000:00:0a.0: reg 14: [io 0x30f8-0x30ff]
[ 0.249426] pci 0000:00:0a.0: reg 18: [mem 0xd0889c00-0xd0889cff]
[ 0.249432] pci 0000:00:0a.0: reg 1c: [mem 0xd0889800-0xd088980f]
[ 0.249467] pci 0000:00:0a.0: supports D1 D2
[ 0.249470] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249475] pci 0000:00:0a.0: PME# disabled
[ 0.249493] pci 0000:00:0b.0: [10de:0562] type 1 class 0x000604
[ 0.249525] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249528] pci 0000:00:0b.0: PME# disabled
[ 0.249547] pci 0000:00:0c.0: [10de:0563] type 1 class 0x000604
[ 0.249578] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249581] pci 0000:00:0c.0: PME# disabled
[ 0.249600] pci 0000:00:0d.0: [10de:0563] type 1 class 0x000604
[ 0.249630] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249634] pci 0000:00:0d.0: PME# disabled
[ 0.249659] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.249683] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.249702] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.249723] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.249782] pci 0000:01:04.0: [1180:0832] type 0 class 0x000c00
[ 0.249793] pci 0000:01:04.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.249797] pci 0000:01:04.0: MMC cards are now supported by standard SDHCI controller
[ 0.249807] pci 0000:01:04.0: reg 10: [mem 0xd0500000-0xd05007ff]
[ 0.249861] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[ 0.249865] pci 0000:01:04.0: PME# disabled
[ 0.249883] pci 0000:01:04.1: [1180:0822] type 0 class 0x000805
[ 0.249896] pci 0000:01:04.1: reg 10: [mem 0xd0500800-0xd05008ff]
[ 0.249949] pci 0000:01:04.1: supports D1 D2
[ 0.249952] pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249956] pci 0000:01:04.1: PME# disabled
[ 0.249973] pci 0000:01:04.2: [1180:0592] type 0 class 0x000880
[ 0.249987] pci 0000:01:04.2: reg 10: [mem 0xd0501000-0xd05010ff]
[ 0.250040] pci 0000:01:04.2: supports D1 D2
[ 0.250043] pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.250047] pci 0000:01:04.2: PME# disabled
[ 0.250065] pci 0000:01:04.3: [1180:0852] type 0 class 0x000880
[ 0.250079] pci 0000:01:04.3: reg 10: [mem 0xd0501400-0xd05014ff]
[ 0.250132] pci 0000:01:04.3: supports D1 D2
[ 0.250134] pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.250139] pci 0000:01:04.3: PME# disabled
[ 0.250173] pci 0000:00:08.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.250179] pci 0000:00:08.0: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.250184] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.250188] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.250191] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.250195] pci 0000:00:08.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.250199] pci 0000:00:08.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.250203] pci 0000:00:08.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.250207] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.250211] pci 0000:00:08.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.250215] pci 0000:00:08.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.250219] pci 0000:00:08.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.250223] pci 0000:00:08.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.250226] pci 0000:00:08.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.250230] pci 0000:00:08.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.250234] pci 0000:00:08.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.250238] pci 0000:00:08.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.250242] pci 0000:00:08.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.250245] pci 0000:00:08.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.250282] pci 0000:02:00.0: [10de:0425] type 0 class 0x000300
[ 0.250293] pci 0000:02:00.0: reg 10: [mem 0xd1000000-0xd1ffffff]
[ 0.250304] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.250314] pci 0000:02:00.0: reg 1c: [mem 0xd2000000-0xd3ffffff 64bit]
[ 0.250322] pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
[ 0.250329] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.260028] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.260032] pci 0000:00:0b.0: bridge window [io 0x4000-0x4fff]
[ 0.260036] pci 0000:00:0b.0: bridge window [mem 0xd1000000-0xd3ffffff]
[ 0.260040] pci 0000:00:0b.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.260065] pci 0000:00:0c.0: PCI bridge to [bus 03-04]
[ 0.260070] pci 0000:00:0c.0: bridge window [io 0x5000-0x5fff]
[ 0.260073] pci 0000:00:0c.0: bridge window [mem 0xd0200000-0xd03fffff]
[ 0.260078] pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.260119] pci 0000:05:00.0: [168c:001c] type 0 class 0x000200
[ 0.260136] pci 0000:05:00.0: reg 10: [mem 0xd0400000-0xd040ffff 64bit]
[ 0.260225] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.260233] pci 0000:00:0d.0: PCI bridge to [bus 05-05]
[ 0.260239] pci 0000:00:0d.0: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.260252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.260393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.260418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 0.260466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.260510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.260705] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.260894] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.260897] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.286348] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10
[ 0.286497] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11)
[ 0.286643] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled.
[ 0.286790] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled.
[ 0.286935] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
[ 0.287079] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *10
[ 0.287222] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[ 0.287366] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
[ 0.287508] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.287655] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11
[ 0.287799] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7
[ 0.287951] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
[ 0.288110] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.288254] ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *0, disabled.
[ 0.288399] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
[ 0.288544] ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5
[ 0.288695] ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10
[ 0.288847] ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11
[ 0.288994] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11
[ 0.293115] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.293115] vgaarb: loaded
[ 0.293115] vgaarb: bridge control possible 0000:02:00.0
[ 0.293115] PCI: Using ACPI for IRQ routing
[ 0.295660] PCI: pci_cache_line_size set to 64 bytes
[ 0.295771] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.295775] reserve RAM buffer: 000000007ff50000 - 000000007fffffff
[ 0.295957] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.295965] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.295970] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.308095] Switching to clocksource hpet
[ 0.310973] pnp: PnP ACPI init
[ 0.311000] ACPI: bus type pnp registered
[ 0.311140] pnp 00:00: [bus 00-ff]
[ 0.311144] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.311148] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.311151] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.311155] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.311160] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.311164] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.311167] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.311171] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.311175] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.311178] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.311182] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.311185] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.311189] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.311192] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.311196] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.311200] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.311203] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.311207] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.311210] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.311312] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.311485] pnp 00:01: [io 0x0010-0x001f]
[ 0.311488] pnp 00:01: [io 0x0022-0x003f]
[ 0.311492] pnp 00:01: [io 0x0044-0x005f]
[ 0.311495] pnp 00:01: [io 0x0063]
[ 0.311498] pnp 00:01: [io 0x0065]
[ 0.311500] pnp 00:01: [io 0x0067-0x006f]
[ 0.311504] pnp 00:01: [io 0x0072-0x0073]
[ 0.311507] pnp 00:01: [io 0x0074-0x007f]
[ 0.311509] pnp 00:01: [io 0x0080]
[ 0.311512] pnp 00:01: [io 0x0084]
[ 0.311515] pnp 00:01: [io 0x0091-0x0093]
[ 0.311518] pnp 00:01: [io 0x0097-0x009f]
[ 0.311521] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.311524] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.311527] pnp 00:01: [io 0x0360-0x0361]
[ 0.311531] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.311646] system 00:01: [io 0x0360-0x0361] has been reserved
[ 0.311650] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.311654] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.311675] pnp 00:02: [io 0x0000-0x0008]
[ 0.311679] pnp 00:02: [io 0x000a-0x000f]
[ 0.311682] pnp 00:02: [io 0x0081-0x0083]
[ 0.311685] pnp 00:02: [io 0x0087]
[ 0.311689] pnp 00:02: [io 0x0089-0x008b]
[ 0.311691] pnp 00:02: [io 0x008f]
[ 0.311694] pnp 00:02: [io 0x00c0-0x00d1]
[ 0.311697] pnp 00:02: [io 0x00d4-0x00df]
[ 0.311701] pnp 00:02: [dma 4]
[ 0.311751] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.311765] pnp 00:03: [io 0x0061]
[ 0.311814] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.311851] pnp 00:04: [io 0x0070-0x0071]
[ 0.311902] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.311917] pnp 00:05: [io 0x00f0-0x00f1]
[ 0.311934] pnp 00:05: [irq 13]
[ 0.311936] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.340092] pnp 00:06: [io 0xe02c-0xe02f]
[ 0.340108] pnp 00:06: [irq 4]
[ 0.340194] pnp 00:06: Plug and Play ACPI device, IDs ENE0100 (active)
[ 0.340222] pnp 00:07: [mem 0xe0000000-0xefffffff]
[ 0.340322] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.340326] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.340366] pnp 00:08: [io 0x0060]
[ 0.340369] pnp 00:08: [io 0x0064]
[ 0.340380] pnp 00:08: [irq 1]
[ 0.340438] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.340533] pnp 00:09: [irq 12]
[ 0.340593] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.340914] pnp 00:0a: [io 0x1000-0x107f]
[ 0.340917] pnp 00:0a: [io 0x1080-0x10ff]
[ 0.340922] pnp 00:0a: [io 0x1400-0x147f]
[ 0.340925] pnp 00:0a: [io 0x1480-0x14ff]
[ 0.340928] pnp 00:0a: [io 0x1800-0x187f]
[ 0.340931] pnp 00:0a: [io 0x1880-0x18ff]
[ 0.341027] system 00:0a: [io 0x1000-0x107f] has been reserved
[ 0.341031] system 00:0a: [io 0x1080-0x10ff] has been reserved
[ 0.341035] system 00:0a: [io 0x1400-0x147f] has been reserved
[ 0.341039] system 00:0a: [io 0x1480-0x14ff] has been reserved
[ 0.341043] system 00:0a: [io 0x1800-0x187f] has been reserved
[ 0.341047] system 00:0a: [io 0x1880-0x18ff] has been reserved
[ 0.341051] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.341132] pnp 00:0b: [irq 0 disabled]
[ 0.341142] pnp 00:0b: [irq 8]
[ 0.341146] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.341204] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.341712] pnp 00:0c: [mem 0xffc00000-0xffffffff]
[ 0.341716] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.341719] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 0.341723] pnp 00:0c: [mem 0xfed00000-0xfed00fff]
[ 0.341726] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.341730] pnp 00:0c: [mem 0xfef00000-0xfef00fff]
[ 0.341838] system 00:0c: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.341842] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.341846] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.341851] system 00:0c: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.341855] system 00:0c: [mem 0xfef00000-0xfef00fff] has been reserved
[ 0.341859] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.341866] pnp: PnP ACPI: found 13 devices
[ 0.341869] ACPI: ACPI bus type pnp unregistered
[ 0.350506] PCI: max bus depth: 1 pci_try_num: 2
[ 0.350535] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[ 0.350541] pci 0000:00:08.0: bridge window [mem 0xd0500000-0xd05fffff]
[ 0.350550] pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.350554] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.350557] pci 0000:00:0b.0: bridge window [io 0x4000-0x4fff]
[ 0.350561] pci 0000:00:0b.0: bridge window [mem 0xd1000000-0xd3ffffff]
[ 0.350565] pci 0000:00:0b.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.350570] pci 0000:00:0c.0: PCI bridge to [bus 03-04]
[ 0.350573] pci 0000:00:0c.0: bridge window [io 0x5000-0x5fff]
[ 0.350577] pci 0000:00:0c.0: bridge window [mem 0xd0200000-0xd03fffff]
[ 0.350581] pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.350586] pci 0000:00:0d.0: PCI bridge to [bus 05-05]
[ 0.350590] pci 0000:00:0d.0: bridge window [mem 0xd0400000-0xd04fffff]
[ 0.350601] pci 0000:00:08.0: setting latency timer to 64
[ 0.350607] pci 0000:00:0b.0: setting latency timer to 64
[ 0.350613] pci 0000:00:0c.0: setting latency timer to 64
[ 0.350619] pci 0000:00:0d.0: setting latency timer to 64
[ 0.350623] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.350626] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.350630] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.350633] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.350636] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.350639] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.350642] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.350646] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.350649] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.350653] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.350656] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.350659] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.350662] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.350666] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.350669] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.350672] pci_bus 0000:00: resource 19 [mem 0xfed40000-0xfed44fff]
[ 0.350675] pci_bus 0000:00: resource 20 [mem 0x80000000-0xfebfffff]
[ 0.350679] pci_bus 0000:01: resource 1 [mem 0xd0500000-0xd05fffff]
[ 0.350682] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.350686] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.350689] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.350693] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.350696] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.350699] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.350702] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.350705] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.350708] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.350712] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.350715] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.350718] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.350721] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.350725] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[ 0.350728] pci_bus 0000:01: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.350731] pci_bus 0000:01: resource 19 [mem 0xfed40000-0xfed44fff]
[ 0.350735] pci_bus 0000:01: resource 20 [mem 0x80000000-0xfebfffff]
[ 0.350738] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.350741] pci_bus 0000:02: resource 1 [mem 0xd1000000-0xd3ffffff]
[ 0.350745] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.350748] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.350751] pci_bus 0000:03: resource 1 [mem 0xd0200000-0xd03fffff]
[ 0.350755] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.350758] pci_bus 0000:05: resource 1 [mem 0xd0400000-0xd04fffff]
[ 0.350853] NET: Registered protocol family 2
[ 0.351008] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.352166] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.354472] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.355040] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.355044] TCP reno registered
[ 0.355059] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.355085] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.355242] NET: Registered protocol family 1
[ 0.355571] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
[ 0.355594] pci 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 23 (level, low) -> IRQ 23
[ 0.408044] pci 0000:00:02.0: PCI INT A disabled
[ 0.408283] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 0.408295] pci 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 0.408311] pci 0000:00:02.1: PCI INT B disabled
[ 0.408545] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 21
[ 0.408557] pci 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 21 (level, low) -> IRQ 21
[ 0.464042] pci 0000:00:04.0: PCI INT A disabled
[ 0.464277] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 20
[ 0.464290] pci 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
[ 0.464305] pci 0000:00:04.1: PCI INT B disabled
[ 0.464363] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.464417] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.464476] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.464542] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.464610] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.464683] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.464760] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.464792] pci 0000:02:00.0: Boot video device
[ 0.464798] PCI: CLS 64 bytes, default 64
[ 0.464877] Unpacking initramfs...
[ 0.885213] Freeing initrd memory: 14460k freed
[ 0.895689] Simple Boot Flag at 0x36 set to 0x1
[ 0.896277] audit: initializing netlink socket (disabled)
[ 0.896293] type=2000 audit(1333045707.892:1): initialized
[ 0.922655] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.939164] VFS: Disk quotas dquot_6.5.2
[ 0.939212] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.939312] msgmni has been set to 4020
[ 0.939578] alg: No test for stdrng (krng)
[ 0.939627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.939631] io scheduler noop registered
[ 0.939634] io scheduler deadline registered
[ 0.939656] io scheduler cfq registered (default)
[ 0.939842] pcieport 0000:00:0b.0: setting latency timer to 64
[ 0.939872] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 0.939975] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.939998] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 0.940102] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.940124] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 0.940236] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.940282] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.940285] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.940589] acpiphp: Slot [1] registered
[ 0.940783] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.940786] vesafb: scrolling: redraw
[ 0.940789] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.941139] vesafb: framebuffer at 0xd3000000, mapped to 0xffffc90010980000, using 3072k, total 14336k
[ 0.946208] Console: switching to colour frame buffer device 128x48
[ 0.951124] fb0: VESA VGA frame buffer device
[ 0.951178] ERST: Table is not found!
[ 0.951181] GHES: HEST is not enabled!
[ 0.951275] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.984650] Linux agpgart interface v0.103
[ 0.984825] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.016951] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.016960] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.017165] mousedev: PS/2 mouse device common for all mice
[ 1.018169] rtc_cmos 00:04: RTC can wake from S4
[ 1.018344] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.018387] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.018404] cpuidle: using governor ladder
[ 1.018407] cpuidle: using governor menu
[ 1.018725] TCP cubic registered
[ 1.018798] NET: Registered protocol family 10
[ 1.019548] Mobile IPv6
[ 1.019551] NET: Registered protocol family 17
[ 1.019557] Registering the dns_resolver key type
[ 1.019765] PM: Hibernation image not present or could not be loaded.
[ 1.019778] registered taskstats version 1
[ 1.028329] rtc_cmos 00:04: setting system clock to 2012-03-29 18:28:28 UTC (1333045708)
[ 1.028405] Initializing network drop monitor service
[ 1.029935] Freeing unused kernel memory: 568k freed
[ 1.030224] Write protecting the kernel read-only data: 6144k
[ 1.033972] Freeing unused kernel memory: 676k freed
[ 1.038003] Freeing unused kernel memory: 668k freed
[ 1.046839] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.257869] udevd[82]: starting version 175
[ 1.324216] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.324471] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 1.324478] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 1.324485] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.333042] usbcore: registered new interface driver usbfs
[ 1.333075] usbcore: registered new interface driver hub
[ 1.350717] SCSI subsystem initialized
[ 1.355517] usbcore: registered new device driver usb
[ 1.356458] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.359269] sdhci: Secure Digital Host Controller Interface driver
[ 1.359273] sdhci: Copyright(c) Pierre Ossman
[ 1.366264] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 1.366285] firewire_ohci 0000:01:04.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 1.368267] libata version 3.00 loaded.
[ 1.394505] ACPI: Invalid active0 threshold
[ 1.413852] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.413857] ACPI: Thermal Zone [THRM] (62 C)
[ 1.420264] firewire_ohci: Added fw-ohci device 0000:01:04.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x11
[ 1.420403] sdhci-pci 0000:01:04.1: SDHCI controller found [1180:0822] (rev 22)
[ 1.420779] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[ 1.420785] sdhci-pci 0000:01:04.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
[ 1.421818] sdhci-pci 0000:01:04.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.421832] mmc0: no vmmc regulator found
[ 1.422871] Registered led device: mmc0::
[ 1.424939] mmc0: SDHCI controller on PCI [0000:01:04.1] using DMA
[ 1.849254] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 1c:75:08:2c:84:f8
[ 1.849260] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
[ 1.849372] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 1.849401] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.849405] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.849438] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.849469] ehci_hcd 0000:00:02.1: debug port 1
[ 1.849477] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.849504] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd0889000
[ 1.860049] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.860084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.860088] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.860091] usb usb1: Product: EHCI Host Controller
[ 1.860094] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 1.860097] usb usb1: SerialNumber: 0000:00:02.1
[ 1.860279] hub 1-0:1.0: USB hub found
[ 1.860286] hub 1-0:1.0: 6 ports detected
[ 1.860470] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
[ 1.860493] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.860498] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.860510] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 1.860537] ehci_hcd 0000:00:04.1: debug port 1
[ 1.860545] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 1.860574] ehci_hcd 0000:00:04.1: irq 20, io mem 0xd0889400
[ 1.872048] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.872070] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.872073] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.872077] usb usb2: Product: EHCI Host Controller
[ 1.872080] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 1.872083] usb usb2: SerialNumber: 0000:00:04.1
[ 1.872234] hub 2-0:1.0: USB hub found
[ 1.872239] hub 2-0:1.0: 6 ports detected
[ 1.872376] pata_amd 0000:00:06.0: version 0.4.1
[ 1.872435] pata_amd 0000:00:06.0: setting latency timer to 64
[ 1.873020] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.873350] scsi0 : pata_amd
[ 1.873486] scsi1 : pata_amd
[ 1.873869] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 1.873873] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 1.873974] ahci 0000:00:09.0: version 3.0
[ 1.874317] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
[ 1.874324] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
[ 1.874359] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
[ 1.874362] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 1.874440] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 1.874445] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part
[ 1.874450] ahci 0000:00:09.0: setting latency timer to 64
[ 1.875561] scsi2 : ahci
[ 1.875673] scsi3 : ahci
[ 1.875773] scsi4 : ahci
[ 1.875871] scsi5 : ahci
[ 1.876068] ata3: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884100 irq 22
[ 1.876072] ata4: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884180 irq 22
[ 1.876076] ata5: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884200 irq 22
[ 1.876080] ata6: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884280 irq 22
[ 1.876524] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 23 (level, low) -> IRQ 23
[ 1.876553] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 1.876557] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 1.876574] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 1.876615] ohci_hcd 0000:00:02.0: irq 23, io mem 0xd0886000
[ 1.920174] firewire_core: created device fw0: GUID 00023f0aba40084e, S400
[ 1.934054] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.934058] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.934061] usb usb3: Product: OHCI Host Controller
[ 1.934064] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 1.934067] usb usb3: SerialNumber: 0000:00:02.0
[ 1.934247] hub 3-0:1.0: USB hub found
[ 1.934255] hub 3-0:1.0: 6 ports detected
[ 1.934430] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 21 (level, low) -> IRQ 21
[ 1.934453] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.934456] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.934469] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 1.934504] ohci_hcd 0000:00:04.0: irq 21, io mem 0xd0887000
[ 1.990038] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.990042] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.990046] usb usb4: Product: OHCI Host Controller
[ 1.990049] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd
[ 1.990052] usb usb4: SerialNumber: 0000:00:04.0
[ 1.990230] hub 4-0:1.0: USB hub found
[ 1.990237] hub 4-0:1.0: 6 ports detected
[ 2.036347] ata1.00: ATAPI: PIONEER DVD-RW DVR-K17RS, 1.02, max UDMA/33
[ 2.036357] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c700) ACPI=0x701f (60:600:0x13)
[ 2.052274] ata1.00: configured for UDMA/33
[ 2.064776] scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17RS 1.02 PQ: 0 ANSI: 5
[ 2.065037] ata2: port disabled--ignoring
[ 2.196038] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.196960] ata3.00: ATA-8: Hitachi HTS542516K9SA00, BBCOC31P, max UDMA/133
[ 2.196965] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.198045] ata3.00: configured for UDMA/133
[ 2.198205] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54251 BBCO PQ: 0 ANSI: 5
[ 2.200041] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.200096] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.200116] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.214526] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.214533] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.214948] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 2.215288] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.215352] sd 2:0:0:0: [sda] Write Protect is off
[ 2.215356] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.215385] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.232067] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 2.644858] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 2.645856] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.658797] usb 1-3: New USB device found, idVendor=5986, idProduct=0102
[ 2.658802] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.658806] usb 1-3: Product: Acer Crystal Eye webcam
[ 3.016033] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 3.228068] usb 3-1: New USB device found, idVendor=093a, idProduct=2510
[ 3.228074] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.228077] usb 3-1: Product: USB OPTICAL MOUSE
[ 3.228080] usb 3-1: Manufacturer: PIXART
[ 3.244428] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input1
[ 3.244546] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-1/input0
[ 3.244574] usbcore: registered new interface driver usbhid
[ 3.244576] usbhid: USB HID core driver
[ 3.629351] device-mapper: uevent: version 1.0.3
[ 3.629448] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 5.952906] PM: Starting manual resume from disk
[ 5.952911] PM: Hibernation image partition 8:5 present
[ 5.952914] PM: Looking for hibernation image.
[ 5.953183] PM: Image not found (code -22)
[ 5.953188] PM: Hibernation image not present or could not be loaded.
[ 5.958236] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 5.958244] PM: Basic memory bitmaps created
[ 5.969307] PM: Basic memory bitmaps freed
[ 6.008885] kjournald starting. Commit interval 5 seconds
[ 6.008917] EXT3-fs (sda6): mounted filesystem with ordered data mode
[ 8.251699] udevd[389]: starting version 175
[ 9.072940] [Firmware Bug]: ACPI(Z00P) defines _DOD but not _DOS
[ 9.073135] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 9.096416] ACPI: Lid Switch [LID]
[ 9.096526] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 9.096533] ACPI: Sleep Button [SLPB]
[ 9.096654] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 9.096658] ACPI: Power Button [PWRB]
[ 9.096736] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 9.096740] ACPI: Power Button [PWRF]
[ 9.099378] ACPI Warning: _BQC returned an invalid level (20110623/video-472)
[ 9.102530] acpi device:10: registered as cooling_device0
[ 9.102648] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/LNXVIDEO:01/input/input6
[ 9.102656] ACPI: Video Device [Z00P] (multi-head: yes rom: no post: no)
[ 9.130550] wmi: Mapper loaded
[ 9.327087] IR NEC protocol handler initialized
[ 9.327379] ene_ir: chip is 0x3909 - kbver = 0x24, rev = 0xc0
[ 9.327383] ene_ir: PLL freq = 1406
[ 9.327385] ene_ir: KB3926B detected
[ 9.339462] ACPI: processor limited to max C-state 1
[ 9.358160] ACPI: AC Adapter [ACAD] (on-line)
[ 9.375180] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 9.395120] acer_wmi: Function bitmap for Communication Device: 0x1
[ 9.395127] acer_wmi: Brightness must be controlled by generic video driver
[ 9.455592] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 9.468932] cfg80211: Calling CRDA to update world regulatory domain
[ 9.608910] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 9.615601] MCE: In-kernel MCE decoding enabled.
[ 9.651236] EDAC MC: Ver: 2.1.0
[ 9.658185] IR RC5(x) protocol handler initialized
[ 9.688047] ACPI: Battery Slot [BAT1] (battery absent)
[ 9.700628] AMD64 EDAC driver v3.4.0
[ 9.700757] EDAC amd64: DRAM ECC disabled.
[ 9.700768] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 9.700770] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 9.700772] (Note that use of the override may cause unknown side effects.)
[ 9.706675] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 9.706710] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 9.716045] Registered IR keymap rc-rc6-mce
[ 9.716184] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8
[ 9.716297] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 9.716338] ene_ir: driver has been successfully loaded
[ 9.738443] IR RC6 protocol handler initialized
[ 9.739255] r592 0000:01:04.2: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
[ 9.739428] r592: driver successfully loaded
[ 9.787284] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 9.914276] IR JVC protocol handler initialized
[ 10.057345] Linux media interface: v0.10
[ 10.091830] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 10.091854] ath5k 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19
[ 10.091865] ath5k 0000:05:00.0: setting latency timer to 64
[ 10.091928] ath5k 0000:05:00.0: registered as 'phy0'
[ 10.114652] Linux video capture interface: v2.00
[ 10.145914] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (5986:0102)
[ 10.247802] IR Sony protocol handler initialized
[ 10.307474] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input9
[ 10.307674] usbcore: registered new interface driver uvcvideo
[ 10.307676] USB Video Class driver (1.1.1)
[ 10.372684] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input10
[ 10.373985] IR MCE Keyboard/mouse protocol handler initialized
[ 10.440215] lirc_dev: IR Remote Control driver registered, major 249
[ 10.536194] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 10.536199] IR LIRC bridge handler initialized
[ 10.543870] r852 0000:01:04.3: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
[ 10.585811] ath: EEPROM regdomain: 0x65
[ 10.585813] ath: EEPROM indicates we should expect a direct regpair map
[ 10.585818] ath: Country alpha2 being used: 00
[ 10.585821] ath: Regpair used: 0x65
[ 10.585988] r852: driver loaded successfully
[ 10.629810] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 10.630520] Registered led device: ath5k-phy0::rx
[ 10.630551] Registered led device: ath5k-phy0::tx
[ 10.630564] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 10.976957] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 10.976966] snd_hda_intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 10.976971] hda_intel: Disabling MSI
[ 10.977009] snd_hda_intel 0000:00:07.0: setting latency timer to 64
[ 11.003568] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04713/0x204000/0x0
[ 11.106002] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 11.234529] nvidia: module license 'NVIDIA' taints kernel.
[ 11.234534] Disabling lock debugging due to kernel taint
[ 12.063070] ACPI: PCI Interrupt Link [LK2E] enabled at IRQ 17
[ 12.063095] nvidia 0000:02:00.0: PCI INT A -> Link[LK2E] -> GSI 17 (level, low) -> IRQ 17
[ 12.063109] nvidia 0000:02:00.0: setting latency timer to 64
[ 12.063115] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 12.063422] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012
[ 12.336149] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input12
[ 12.496515] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input13
[ 13.348728] kvm: Nested Virtualization enabled
[ 13.497651] Adding 3068376k swap on /dev/sda5. Priority:-1 extents:1 across:3068376k
[ 13.952182] EXT3-fs (sda6): using internal journal
[ 63.244106] usb 3-1: USB disconnect, device number 2
[ 64.844048] usb 3-1: new low-speed USB device number 3 using ohci_hcd
[ 65.061066] usb 3-1: New USB device found, idVendor=093a, idProduct=2510
[ 65.061071] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 65.061075] usb 3-1: Product: USB OPTICAL MOUSE
[ 65.061078] usb 3-1: Manufacturer: PIXART
[ 65.074396] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input14
[ 65.074611] generic-usb 0003:093A:2510.0002: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-1/input0
[ 65.999182] loop: module loaded
[ 66.051752] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-58 (2 cpu cores) (version 2.20.00)
[ 66.051809] powernow-k8: fid 0xb (1900 MHz), vid 0x11
[ 66.051812] powernow-k8: fid 0xa (1800 MHz), vid 0x12
[ 66.051814] powernow-k8: fid 0x8 (1600 MHz), vid 0x13
[ 66.051817] powernow-k8: fid 0x0 (800 MHz), vid 0x1e
[ 66.228119] vboxdrv: Found 2 processor cores.
[ 66.228854] vboxdrv: fAsync=1 offMin=0x6c3f3 offMax=0x6c3f3
[ 66.229188] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 66.229195] vboxdrv: Successfully loaded version 4.1.8_Debian (interface 0x00190000).
[ 66.324343] [drm] Initialized drm 1.1.0 20060810
[ 70.798406] kjournald starting. Commit interval 5 seconds
[ 70.804318] EXT3-fs (dm-0): using internal journal
[ 70.804330] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 70.937078] kjournald starting. Commit interval 5 seconds
[ 70.944323] EXT3-fs (dm-1): using internal journal
[ 70.944341] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 71.325680] kjournald starting. Commit interval 5 seconds
[ 71.328305] EXT3-fs (dm-2): using internal journal
[ 71.328313] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[ 73.772469] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 74.770346] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1)
[ 74.771783] wlan0: authenticated
[ 74.778244] wlan0: associate with 00:06:25:ed:1f:e7 (try 1)
[ 74.780212] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=1)
[ 74.780220] wlan0: associated
[ 74.781471] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 77.228308] forcedeth 0000:00:0a.0: irq 43 for MSI/MSI-X
[ 77.228558] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 77.230013] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 81.568729] fuse init (API version 7.17)
[ 85.520040] wlan0: no IPv6 routers present
[ 88.286006] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 118.102422] lp: driver loaded but no devices found
[ 118.971697] ppdev: user-space parallel port driver
[ 146.052666] NET: Registered protocol family 23
[ 189.038476] vboxpci: IOMMU not found (not registered)
[ 197.968550] forcedeth 0000:00:0a.0: eth0: link down
[ 197.976092] forcedeth 0000:00:0a.0: eth0: link down
[ 200.905341] ehci_hcd 0000:00:02.1: PCI INT B disabled
[ 200.905386] ehci_hcd 0000:00:02.1: PME# enabled
[ 200.920736] ohci_hcd 0000:00:04.0: PCI INT A disabled
[ 200.920770] ohci_hcd 0000:00:04.0: PME# enabled
[ 200.936701] ehci_hcd 0000:00:04.1: PCI INT B disabled
[ 200.936736] ehci_hcd 0000:00:04.1: PME# enabled
[ 201.956126] ehci_hcd 0000:00:02.1: BAR 0: set to [mem 0xd0889000-0xd08890ff] (PCI address [0xd0889000-0xd08890ff])
[ 201.956156] ehci_hcd 0000:00:02.1: restoring config space at offset 0xf (was 0x1030200, writing 0x1030207)
[ 201.956178] ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
[ 201.956240] ehci_hcd 0000:00:02.1: PME# disabled
[ 201.956265] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 201.956278] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 202.280061] ehci_hcd 0000:00:04.1: BAR 0: set to [mem 0xd0889400-0xd08894ff] (PCI address [0xd0889400-0xd08894ff])
[ 202.280079] ehci_hcd 0000:00:04.1: restoring config space at offset 0xf (was 0x1030200, writing 0x103020b)
[ 202.280094] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
[ 202.280130] ehci_hcd 0000:00:04.1: PME# disabled
[ 202.280143] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
[ 202.280150] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 202.328068] ohci_hcd 0000:00:04.0: BAR 0: set to [mem 0xd0887000-0xd0887fff] (PCI address [0xd0887000-0xd0887fff])
[ 202.328087] ohci_hcd 0000:00:04.0: restoring config space at offset 0xf (was 0x1030100, writing 0x103010a)
[ 202.328100] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00003)
[ 202.328121] ohci_hcd 0000:00:04.0: PME# disabled
[ 202.328134] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 21 (level, low) -> IRQ 21
[ 202.328142] ohci_hcd 0000:00:04.0: setting latency timer to 64
Reply to: