Bug#665881: linux-image-3.2.0-2-amd64: module ath5k is blocking wlan-card
Package: linux-2.6
Severity: important
Dear Maintainers,
I am running debian/testing. After a kernel update (3.1.0 -> 3.2.0) I cannot get any wireless connection now. First of all, I thought, it was wicd, but
it looks like kernel module ath5k is the problem. As you can see in the log, ath5k is spamming the log with a lot of
calibration errors. Unloading ath5k is stopping these, reloading it let them appear again.
Everything began with a chnage to a 3.2.0-kernel. A prior version of the 3.2.0 kernel (I believe it was 3.2.0-1-amd64) let
me get access to the wlan-hardware, when I shutdown the notebook and put it 10 seconds completely from power. Then wireless
worked as usual. A reboot did not solve the problem, after a reboot, wlan did not work again because the hardware was blocked.
I had to put power off again.
With the latest kernel, this trick does not work any more. Oh, and I checked my hardware with a livefile linux (knoppix), everything
is working fine with it.
Just a hint: I am using another netbook, which is using the newer kernel module "ath9k", which is the successor of ath5k.
On this netbook I get a similar problem, which might be caused by the same reason: wicd cannot be initialised, ath9k is loaded,
but after a few seconds suddenly everything is working again. I think, this is a problem by ath9k, as it appears at the same time, I
changed the kernel version.
I also downgraded to a prior version of wicd, to exclude, that the problem is caused by wicd - with no success.
So I think, the problem is indeed caused by the kernel (or its module ath5k/ath9k).
You shall know, I am using still WEP, but that should not matter, as there are no accesspoints seen at all.
The device "wlan0" is existent (ifconfig is showing me), I see an IP address of it, but ping to the gateway is
getting no response.
Well, I hope, I gave you enough information. Below you see all my hardware information. This time I followed your advice, to
put the message above the log! Sorry, for the last time, when I put it below.
Please feel free to ask for any further information. Any help is very apreciated.
Kind regards
Hans-J. Ullrich
-- Package-specific info:
** Version:
Linux version 3.2.0-2-amd64 (Debian 3.2.12-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Tue Mar 20 18:36:37 UTC 2012
** Command line:
root=UUID=f2f57267-0289-412c-9f9b-e8702e8b7010 ro quiet vga=791
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[ 175.461616] ath5k phy0: gain calibration timeout (2462MHz)
[ 175.462671] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 190.960145] usb 3-1: USB disconnect, device number 3
[ 192.560051] usb 3-1: new low-speed USB device number 4 using ohci_hcd
[ 192.772077] usb 3-1: New USB device found, idVendor=093a, idProduct=2510
[ 192.772226] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 192.772373] usb 3-1: Product: USB OPTICAL MOUSE
[ 192.772465] usb 3-1: Manufacturer: PIXART
[ 192.785879] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input16
[ 192.786708] generic-usb 0003:093A:2510.0003: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-1/input0
[ 222.805639] vboxpci: IOMMU not found (not registered)
[ 223.597826] ath5k phy0: gain calibration timeout (2412MHz)
[ 224.086320] ath5k phy0: gain calibration timeout (2417MHz)
[ 224.580417] ath5k phy0: gain calibration timeout (2422MHz)
[ 225.062294] ath5k phy0: gain calibration timeout (2427MHz)
[ 225.545978] ath5k phy0: gain calibration timeout (2432MHz)
[ 226.030884] ath5k phy0: gain calibration timeout (2437MHz)
[ 226.514112] ath5k phy0: gain calibration timeout (2442MHz)
[ 226.998787] ath5k phy0: gain calibration timeout (2447MHz)
[ 227.486546] ath5k phy0: gain calibration timeout (2452MHz)
[ 227.979644] ath5k phy0: gain calibration timeout (2457MHz)
[ 229.405832] net_ratelimit: 2 callbacks suppressed
[ 229.408114] ath5k phy0: gain calibration timeout (2472MHz)
[ 229.858757] ath5k phy0: gain calibration timeout (2462MHz)
[ 231.090546] ath5k phy0: gain calibration timeout (2412MHz)
[ 231.577707] ath5k phy0: gain calibration timeout (2417MHz)
[ 232.071690] ath5k phy0: gain calibration timeout (2422MHz)
[ 232.175223] forcedeth 0000:00:0a.0: eth0: link down
[ 232.557712] ath5k phy0: gain calibration timeout (2427MHz)
[ 232.562684] forcedeth 0000:00:0a.0: eth0: link down
[ 233.045454] ath5k phy0: gain calibration timeout (2432MHz)
[ 233.374515] ehci_hcd 0000:00:02.1: PCI INT B disabled
[ 233.377040] ehci_hcd 0000:00:02.1: PME# enabled
[ 233.392312] ohci_hcd 0000:00:04.0: PCI INT A disabled
[ 233.394584] ohci_hcd 0000:00:04.0: PME# enabled
[ 233.408286] ehci_hcd 0000:00:04.1: PCI INT B disabled
[ 233.410488] ehci_hcd 0000:00:04.1: PME# enabled
[ 233.529885] ath5k phy0: gain calibration timeout (2437MHz)
[ 233.568047] ehci_hcd 0000:00:02.1: BAR 0: set to [mem 0xd0889000-0xd08890ff] (PCI address [0xd0889000-0xd08890ff])
[ 233.570486] ehci_hcd 0000:00:02.1: restoring config space at offset 0xf (was 0x1030200, writing 0x1030207)
[ 233.570498] ehci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
[ 233.570530] ehci_hcd 0000:00:02.1: PME# disabled
[ 233.570542] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 233.573062] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 233.785233] forcedeth 0000:00:0a.0: eth0: link up
[ 233.884033] ehci_hcd 0000:00:04.1: BAR 0: set to [mem 0xd0889400-0xd08894ff] (PCI address [0xd0889400-0xd08894ff])
[ 233.886711] ehci_hcd 0000:00:04.1: restoring config space at offset 0xf (was 0x1030200, writing 0x103020b)
[ 233.886724] ehci_hcd 0000:00:04.1: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00002)
[ 233.886757] ehci_hcd 0000:00:04.1: PME# disabled
[ 233.886770] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 20 (level, low) -> IRQ 20
[ 233.889500] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 233.936028] ohci_hcd 0000:00:04.0: BAR 0: set to [mem 0xd0887000-0xd0887fff] (PCI address [0xd0887000-0xd0887fff])
[ 233.938869] ohci_hcd 0000:00:04.0: restoring config space at offset 0xf (was 0x1030100, writing 0x103010a)
[ 233.938882] ohci_hcd 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00003)
[ 233.938902] ohci_hcd 0000:00:04.0: PME# disabled
[ 233.938914] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 21 (level, low) -> IRQ 21
[ 233.941781] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 234.013995] ath5k phy0: gain calibration timeout (2442MHz)
[ 234.499879] ath5k phy0: gain calibration timeout (2447MHz)
[ 234.991751] ath5k phy0: gain calibration timeout (2452MHz)
[ 235.486449] ath5k phy0: gain calibration timeout (2457MHz)
[ 235.970404] ath5k phy0: gain calibration timeout (2462MHz)
[ 236.464582] ath5k phy0: gain calibration timeout (2467MHz)
[ 236.913623] ath5k phy0: gain calibration timeout (2472MHz)
[ 237.362032] ath5k phy0: gain calibration timeout (2462MHz)
[ 248.000725] ath5k 0000:05:00.0: PCI INT A disabled
[ 918.267419] ath5k 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19
[ 918.268060] ath5k 0000:05:00.0: setting latency timer to 64
[ 918.268225] ath5k 0000:05:00.0: registered as 'phy1'
[ 918.764867] ath: EEPROM regdomain: 0x65
[ 918.764869] ath: EEPROM indicates we should expect a direct regpair map
[ 918.764874] ath: Country alpha2 being used: 00
[ 918.764876] ath: Regpair used: 0x65
[ 918.765012] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 918.766007] Registered led device: ath5k-phy1::rx
[ 918.766039] Registered led device: ath5k-phy1::tx
[ 918.766053] ath5k phy1: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 919.445554] ath5k phy1: gain calibration timeout (2412MHz)
[ 919.774449] ath5k phy1: gain calibration timeout (2412MHz)
[ 919.776082] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1186.000155] usb 3-1: USB disconnect, device number 4
[ 1187.748060] usb 3-1: new low-speed USB device number 5 using ohci_hcd
[ 1187.961085] usb 3-1: New USB device found, idVendor=093a, idProduct=2510
[ 1187.961221] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1187.961358] usb 3-1: Product: USB OPTICAL MOUSE
[ 1187.961446] usb 3-1: Manufacturer: PIXART
[ 1187.974885] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input17
[ 1187.975715] generic-usb 0003:093A:2510.0004: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:02.0-1/input0
[ 1272.013914] ath5k phy1: gain calibration timeout (2417MHz)
[ 1272.501602] ath5k phy1: gain calibration timeout (2422MHz)
[ 1272.988036] ath5k phy1: gain calibration timeout (2427MHz)
[ 1273.480208] ath5k phy1: gain calibration timeout (2432MHz)
[ 1273.966437] ath5k phy1: gain calibration timeout (2437MHz)
[ 1274.464404] ath5k phy1: gain calibration timeout (2442MHz)
[ 1274.960741] ath5k phy1: gain calibration timeout (2447MHz)
[ 1275.445754] ath5k phy1: gain calibration timeout (2452MHz)
[ 1275.929755] ath5k phy1: gain calibration timeout (2457MHz)
[ 1276.413773] ath5k phy1: gain calibration timeout (2462MHz)
[ 1277.811380] net_ratelimit: 2 callbacks suppressed
[ 1277.814838] ath5k phy1: gain calibration timeout (2412MHz)
** Model information
sys_vendor: Acer
product_name: Aspire 7520G
product_version: V1.32
chassis_vendor: Acer
chassis_version: N/A
bios_vendor: Acer
bios_version: V1.32
board_vendor: Acer
board_name: Fuquene
board_version: N/A
** Loaded modules:
ath5k
pci_stub
vboxpci(O)
vboxnetadp(O)
snd_hrtimer
vboxnetflt(O)
cpufreq_stats
cpufreq_conservative
irda
crc_ccitt
parport_pc
ppdev
lp
parport
binfmt_misc
uinput
fuse
ext2
analog
gameport
isofs
vboxvideo(O)
drm
vboxdrv(O)
usbnet
mii
cpufreq_userspace
cpufreq_powersave
powernow_k8
mperf
loop
lrw
gf128mul
kvm_amd
kvm
snd_hda_codec_realtek
nvidia(P)
snd_hda_intel
snd_hda_codec
uvcvideo
videodev
snd_hwdep
media
snd_pcm_oss
snd_mixer_oss
snd_pcm
v4l2_compat_ioctl32
snd_seq_midi
ir_lirc_codec
joydev
lirc_dev
snd_rawmidi
snd_seq_midi_event
ir_mce_kbd_decoder
snd_seq
arc4
snd_timer
snd_seq_device
snd
ir_sony_decoder
ir_jvc_decoder
soundcore
ir_rc6_decoder
snd_page_alloc
ir_rc5_decoder
r592
rc_rc6_mce
ir_nec_decoder
ene_ir
memstick
ath
r852
sm_common
nand
nand_ids
mac80211
mtd
acer_wmi
nand_ecc
edac_core
sparse_keymap
k8temp
i2c_nforce2
rc_core
battery
ac
edac_mce_amd
i2c_core
evdev
power_supply
cfg80211
rfkill
psmouse
pcspkr
wmi
video
serio_raw
button
processor
ext3
mbcache
jbd
sha256_generic
dm_crypt
dm_mod
aes_x86_64
aes_generic
usbhid
hid
sr_mod
cdrom
sd_mod
crc_t10dif
ata_generic
ohci_hcd
pata_amd
ahci
libahci
sdhci_pci
sdhci
mmc_core
libata
thermal
thermal_sys
ehci_hcd
firewire_ohci
scsi_mod
firewire_core
crc_itu_t
usbcore
forcedeth
usb_common
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP67 Memory Controller [10de:0547] (rev a2)
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation MCP67 ISA Bridge [10de:0548] (rev a2)
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 1d00 [size=256]
00:01.1 SMBus [0c05]: nVidia Corporation MCP67 SMBus [10de:0542] (rev a2)
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 3080 [size=64]
Region 4: I/O ports at 3040 [size=64]
Region 5: I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:01.2 RAM memory [0500]: nVidia Corporation MCP67 Memory Controller [10de:0541] (rev a2)
Subsystem: nVidia Corporation Device [10de:cb84]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.3 Co-processor [0b40]: nVidia Corporation MCP67 Co-processor [10de:0543] (rev a2)
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d0600000 (32-bit, non-prefetchable) [size=512K]
00:02.0 USB controller [0c03]: nVidia Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0886000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:02.1 USB controller [0c03]: nVidia Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at d0889000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:04.0 USB controller [0c03]: nVidia Corporation MCP67 OHCI USB 1.1 Controller [10de:055e] (rev a2) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0887000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:04.1 USB controller [0c03]: nVidia Corporation MCP67 EHCI USB 2.0 Controller [10de:055f] (rev a2) (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at d0889400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:06.0 IDE interface [0101]: nVidia Corporation MCP67 IDE Controller [10de:0560] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 30c0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd
00:07.0 Audio device [0403]: nVidia Corporation MCP67 High Definition Audio [10de:055c] (rev a1)
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d0880000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:08.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Bridge [10de:0561] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: d0500000-d05fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:09.0 IDE interface [0101]: nVidia Corporation MCP67 AHCI Controller [10de:0550] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 30f0 [size=8]
Region 1: I/O ports at 30e4 [size=4]
Region 2: I/O ports at 30e8 [size=8]
Region 3: I/O ports at 30e0 [size=4]
Region 4: I/O ports at 30d0 [size=16]
Region 5: Memory at d0884000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP67 Ethernet [10de:054c] (rev a2)
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d0888000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 30f8 [size=8]
Region 2: Memory at d0889c00 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at d0889800 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
00:0b.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0562] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d1000000-d3ffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d0200000-d03fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0d.0 PCI bridge [0604]: nVidia Corporation MCP67 PCI Express Bridge [10de:0563] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: d0400000-d04fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:04.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0500000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
01:04.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d0500800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
01:04.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d0501000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r592
01:04.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at d0501400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r852
02:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8600M GS] [10de:0425] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Acer Incorporated [ALI] Device [1025:0126]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d2000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 4000 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: nvidia
05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
Subsystem: AMBIT Microsystem Corp. AR5BXB63 802.11bg NIC [1468:0428]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath5k
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 5986:0102 Acer, Inc Crystal Eye Webcam
Bus 003 Device 005: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: x86_64
Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
Reply to: