Bug#665488: linux-image-3.2.0-2-amd64: Page fault in i965_write_entry
Package: linux-2.6
Version: 3.2.12-1
Severity: normal
After installing the latest kernel upgrade (version 3.2.12-1) my
XFCE desktop consistently hangs one minute after boot. If I switch
to VT1 before the hang I can see that a page fault is killing Xorg, see
end of kernel log below.
If I downgrade my kernel to version 3.2.9-1 then the problem goes away.
Additional information that may be of use...
In the couple of years of using my laptop with various kernel and Debian
versions and desktop evironments I've noticed that a minute after boot
the system seems to receive bogus events indicating that display
interface or monitor has changed. This started happening immediately
after a BIOS upgrade so I suspect some ACPI bug or hack is the trigger.
This has caused various problems over the years, like having to manually
reset screen resolution or re-enable external monitor, but this is the
first time it has triggered a kernel bug.
-- Package-specific info:
** Kernel log:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.12-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Tue Mar 20 18:36:37 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=08952afd-af0d-43fe-90e3-ca8f2330cc5e ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bc6b1000 (usable)
[ 0.000000] BIOS-e820: 00000000bc6b1000 - 00000000bc6b7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bc6b7000 - 00000000bc7ba000 (usable)
[ 0.000000] BIOS-e820: 00000000bc7ba000 - 00000000bc80f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bc80f000 - 00000000bc908000 (usable)
[ 0.000000] BIOS-e820: 00000000bc908000 - 00000000bcb0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bcb0f000 - 00000000bcb18000 (usable)
[ 0.000000] BIOS-e820: 00000000bcb18000 - 00000000bcb1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bcb1f000 - 00000000bcb64000 (usable)
[ 0.000000] BIOS-e820: 00000000bcb64000 - 00000000bcb9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bcb9f000 - 00000000bcc00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. P560 /P560 , BIOS 03LV.MP00.20100121.hkk 01/21/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xbcb64 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0BD000000 mask FFF000000 uncachable
[ 0.000000] 1 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 000000000 mask F80000000 write-back
[ 0.000000] 3 base 080000000 mask FC0000000 write-back
[ 0.000000] 4 base 0BCE00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f6fb0] f6fb0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bcb64000
[ 0.000000] 0000000000 - 00bca00000 page 2M
[ 0.000000] 00bca00000 - 00bcb64000 page 4k
[ 0.000000] kernel direct mapping tables up to bcb64000 @ 1fffb000-20000000
[ 0.000000] RAMDISK: 36b0c000 - 3757e000
[ 0.000000] ACPI: RSDP 00000000000f6f10 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000bcbf4cd6 00084 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bcbe7000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bcbe8000 07D56 (v02 Intel CANTIGA 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000bcb9efc0 00040
[ 0.000000] ACPI: HPET 00000000bcbfccd3 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bcbfcd0b 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000bcbfcd47 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bcbfcdaf 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SPCR 00000000bcbfcdd7 00050 (v01 PTLTD $UCRTBL$ 06040000 PTL 00000001)
[ 0.000000] ACPI: SLIC 00000000bcbfce27 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: ASF! 00000000bcbfcf9d 00063 (v16 CETP CETP 06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000bcbf4d82 00093 (v01 BrtRef DD01BRT 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bcbe6000 005F9 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bcbe5000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bcbe4000 0020F (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bcb64000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000bcb64000
[ 0.000000] NODE_DATA [00000000bcb5f000 - 00000000bcb63fff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800b8e00000-ffff8800bb7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bc6b1
[ 0.000000] 0: 0x000bc6b7 -> 0x000bc7ba
[ 0.000000] 0: 0x000bc80f -> 0x000bc908
[ 0.000000] 0: 0x000bcb0f -> 0x000bcb18
[ 0.000000] 0: 0x000bcb1f -> 0x000bcb64
[ 0.000000] On node 0 totalpages: 772234
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10512 pages used for memmap
[ 0.000000] DMA32 zone: 757739 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bc6b1000 - 00000000bc6b7000
[ 0.000000] PM: Registered nosave memory: 00000000bc7ba000 - 00000000bc80f000
[ 0.000000] PM: Registered nosave memory: 00000000bc908000 - 00000000bcb0f000
[ 0.000000] PM: Registered nosave memory: 00000000bcb18000 - 00000000bcb1f000
[ 0.000000] Allocating PCI resources starting at bcc00000 (gap: bcc00000:4211c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bc400000 s82304 r8192 d24192 u1048576
[ 0.000000] pcpu-alloc: s82304 r8192 d24192 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 761661
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=UUID=08952afd-af0d-43fe-90e3-ca8f2330cc5e ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3026488k/3091856k available (3402k kernel code, 2920k absent, 62448k reserved, 3330k data, 568k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2526.871 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.74 BogoMIPS (lpj=10107484)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004049] Security Framework initialized
[ 0.004054] AppArmor: AppArmor disabled by boot time parameter
[ 0.004380] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006573] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008578] Mount-cache hash table entries: 256
[ 0.008710] Initializing cgroup subsys cpuacct
[ 0.008714] Initializing cgroup subsys memory
[ 0.008726] Initializing cgroup subsys devices
[ 0.008729] Initializing cgroup subsys freezer
[ 0.008731] Initializing cgroup subsys net_cls
[ 0.008733] Initializing cgroup subsys blkio
[ 0.008740] Initializing cgroup subsys perf_event
[ 0.008771] CPU: Physical Processor ID: 0
[ 0.008772] CPU: Processor Core ID: 0
[ 0.008775] mce: CPU supports 6 MCE banks
[ 0.008781] CPU0: Thermal monitoring enabled (TM2)
[ 0.008785] using mwait in idle threads.
[ 0.009201] ACPI: Core revision 20110623
[ 0.020238] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059929] CPU0: Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz stepping 0a
[ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.060003] ... version: 2
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 9a000
[ 0.148036] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148070] Brought up 2 CPUs
[ 0.148072] Total of 2 processors activated (10107.70 BogoMIPS).
[ 0.149766] devtmpfs: initialized
[ 0.152665] PM: Registering ACPI NVS region at bcb64000 (241664 bytes)
[ 0.152665] print_constraints: dummy:
[ 0.152665] NET: Registered protocol family 16
[ 0.152665] ACPI: bus type pci registered
[ 0.152665] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.152665] PCI: not using MMCONFIG
[ 0.152665] PCI: Using configuration type 1 for base access
[ 0.152909] bio: create slab <bio-0> at 0
[ 0.152909] ACPI: Added _OSI(Module Device)
[ 0.152909] ACPI: Added _OSI(Processor Device)
[ 0.152909] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.152909] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.153293] ACPI: EC: Look up EC in DSDT
[ 0.158603] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.160769] ACPI: SSDT 00000000bcb1ac20 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.161061] ACPI: Dynamic OEM Table Load:
[ 0.161064] ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.161229] ACPI: SSDT 00000000bcb18020 00C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.161503] ACPI: Dynamic OEM Table Load:
[ 0.161506] ACPI: SSDT (null) 00C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.184273] ACPI: SSDT 00000000bcb19ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.184582] ACPI: Dynamic OEM Table Load:
[ 0.184584] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.196112] ACPI: SSDT 00000000bcb19f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.196398] ACPI: Dynamic OEM Table Load:
[ 0.196400] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.712093] ACPI: Interpreter enabled
[ 0.712099] ACPI: (supports S0 S3 S4 S5)
[ 0.712122] ACPI: Using IOAPIC for interrupt routing
[ 0.712141] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.712640] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.745305] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.750977] ACPI: Power Resource [FN00] (off)
[ 0.750977] ACPI: Power Resource [FN01] (off)
[ 0.750977] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.752384] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.752386] HEST: Table not found.
[ 0.752390] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.752697] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.753323] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.753325] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.753328] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.753330] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.753333] pci_root PNP0A08:00: host bridge window [mem 0xbf000000-0xfebfffff]
[ 0.753345] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.753364] DMAR: Forcing write-buffer flush capability
[ 0.753365] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.753388] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.753399] pci 0000:00:02.0: reg 10: [mem 0xf8000000-0xf83fffff 64bit]
[ 0.753406] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.753412] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.753443] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.753452] pci 0000:00:02.1: reg 10: [mem 0xf8400000-0xf84fffff 64bit]
[ 0.753499] pci 0000:00:03.0: [8086:2a44] type 0 class 0x000780
[ 0.753513] pci 0000:00:03.0: reg 10: [mem 0xf8827000-0xf882700f 64bit]
[ 0.753561] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.753565] pci 0000:00:03.0: PME# disabled
[ 0.753625] pci 0000:00:19.0: [8086:10f5] type 0 class 0x000200
[ 0.753650] pci 0000:00:19.0: reg 10: [mem 0xf8600000-0xf861ffff]
[ 0.753660] pci 0000:00:19.0: reg 14: [mem 0xf8625000-0xf8625fff]
[ 0.753672] pci 0000:00:19.0: reg 18: [io 0x1840-0x185f]
[ 0.753761] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.753765] pci 0000:00:19.0: PME# disabled
[ 0.753790] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.753845] pci 0000:00:1a.0: reg 20: [io 0x1860-0x187f]
[ 0.753914] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.753980] pci 0000:00:1a.1: reg 20: [io 0x1880-0x189f]
[ 0.754056] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.754112] pci 0000:00:1a.2: reg 20: [io 0x18a0-0x18bf]
[ 0.754190] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.754216] pci 0000:00:1a.7: reg 10: [mem 0xf8827400-0xf88277ff]
[ 0.754326] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.754330] pci 0000:00:1a.7: PME# disabled
[ 0.754361] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.754382] pci 0000:00:1b.0: reg 10: [mem 0xf8620000-0xf8623fff 64bit]
[ 0.754477] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.754482] pci 0000:00:1b.0: PME# disabled
[ 0.754508] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.754611] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.754615] pci 0000:00:1c.0: PME# disabled
[ 0.754646] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[ 0.754748] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.754753] pci 0000:00:1c.2: PME# disabled
[ 0.754788] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.754845] pci 0000:00:1d.0: reg 20: [io 0x18c0-0x18df]
[ 0.754913] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.754977] pci 0000:00:1d.1: reg 20: [io 0x18e0-0x18ff]
[ 0.755048] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.755104] pci 0000:00:1d.2: reg 20: [io 0x1c00-0x1c1f]
[ 0.755182] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.755207] pci 0000:00:1d.7: reg 10: [mem 0xf8827800-0xf8827bff]
[ 0.755318] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.755323] pci 0000:00:1d.7: PME# disabled
[ 0.755348] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.755436] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
[ 0.755593] pci 0000:00:1f.2: [8086:2928] type 0 class 0x000101
[ 0.755615] pci 0000:00:1f.2: reg 10: [io 0x1c48-0x1c4f]
[ 0.755626] pci 0000:00:1f.2: reg 14: [io 0x183c-0x183f]
[ 0.755637] pci 0000:00:1f.2: reg 18: [io 0x1c40-0x1c47]
[ 0.755648] pci 0000:00:1f.2: reg 1c: [io 0x1838-0x183b]
[ 0.755659] pci 0000:00:1f.2: reg 20: [io 0x1c30-0x1c3f]
[ 0.755670] pci 0000:00:1f.2: reg 24: [io 0x1c20-0x1c2f]
[ 0.755739] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
[ 0.755760] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 0.755789] pci 0000:00:1f.3: reg 20: [io 0x1c60-0x1c7f]
[ 0.755837] pci 0000:00:1f.5: [8086:292d] type 0 class 0x000101
[ 0.755859] pci 0000:00:1f.5: reg 10: [io 0x1ca0-0x1ca7]
[ 0.755870] pci 0000:00:1f.5: reg 14: [io 0x1c94-0x1c97]
[ 0.755881] pci 0000:00:1f.5: reg 18: [io 0x1c98-0x1c9f]
[ 0.755892] pci 0000:00:1f.5: reg 1c: [io 0x1c90-0x1c93]
[ 0.755903] pci 0000:00:1f.5: reg 20: [io 0x1c80-0x1c8f]
[ 0.755914] pci 0000:00:1f.5: reg 24: [io 0x1c50-0x1c5f]
[ 0.755989] pci 0000:00:1f.6: [8086:2932] type 0 class 0x001180
[ 0.756019] pci 0000:00:1f.6: reg 10: [mem 0xf8626000-0xf8626fff 64bit]
[ 0.756248] pci 0000:02:00.0: [8086:4235] type 0 class 0x000280
[ 0.756290] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4001fff 64bit]
[ 0.756489] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.756500] pci 0000:02:00.0: PME# disabled
[ 0.764089] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.764093] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.764098] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.764105] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.764162] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.764166] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.764171] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.764178] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.764235] pci 0000:06:09.0: [1180:0476] type 2 class 0x000607
[ 0.764253] pci 0000:06:09.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 0.764255] pci 0000:06:09.0: MMC cards are now supported by standard SDHCI controller
[ 0.764270] pci 0000:06:09.0: reg 10: [mem 0xf8500000-0xf8500fff]
[ 0.764302] pci 0000:06:09.0: supports D1 D2
[ 0.764304] pci 0000:06:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.764309] pci 0000:06:09.0: PME# disabled
[ 0.764331] pci 0000:06:09.1: [1180:0822] type 0 class 0x000805
[ 0.764351] pci 0000:06:09.1: reg 10: [mem 0xf8501000-0xf85010ff]
[ 0.764440] pci 0000:06:09.1: supports D1 D2
[ 0.764441] pci 0000:06:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.764446] pci 0000:06:09.1: PME# disabled
[ 0.764496] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.764503] pci 0000:00:1e.0: bridge window [mem 0xf8500000-0xf85fffff]
[ 0.764511] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.764513] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.764516] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.764518] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.764521] pci 0000:00:1e.0: bridge window [mem 0xbf000000-0xfebfffff] (subtractive decode)
[ 0.764561] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[ 0.764584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.764755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.764837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.764887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.764942] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.764945] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.764946] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.772755] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.772800] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.772844] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[ 0.772889] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[ 0.772933] ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
[ 0.772977] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[ 0.773023] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 0.773068] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[ 0.773193] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.773193] vgaarb: loaded
[ 0.773193] vgaarb: bridge control possible 0000:00:02.0
[ 0.773193] PCI: Using ACPI for IRQ routing
[ 0.783119] PCI: pci_cache_line_size set to 64 bytes
[ 0.783257] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.783260] reserve RAM buffer: 00000000bc6b1000 - 00000000bfffffff
[ 0.783264] reserve RAM buffer: 00000000bc7ba000 - 00000000bfffffff
[ 0.783268] reserve RAM buffer: 00000000bc908000 - 00000000bfffffff
[ 0.783272] reserve RAM buffer: 00000000bcb18000 - 00000000bfffffff
[ 0.783275] reserve RAM buffer: 00000000bcb64000 - 00000000bfffffff
[ 0.783379] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.783385] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.783389] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.788112] Switching to clocksource hpet
[ 0.789906] pnp: PnP ACPI init
[ 0.789918] ACPI: bus type pnp registered
[ 0.790239] pnp 00:00: [bus 00-ff]
[ 0.790242] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.790244] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.790246] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.790248] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.790250] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.790252] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.790254] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.790256] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.790258] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.790260] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.790263] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.790265] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.790267] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.790269] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.790271] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.790273] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.790275] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.790277] pnp 00:00: [mem 0xbf000000-0xfebfffff window]
[ 0.790280] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.790341] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.790499] pnp 00:01: [io 0x0000-0x001f]
[ 0.790501] pnp 00:01: [io 0x0081-0x0091]
[ 0.790503] pnp 00:01: [io 0x0093-0x009f]
[ 0.790505] pnp 00:01: [io 0x00c0-0x00df]
[ 0.790507] pnp 00:01: [dma 4]
[ 0.790537] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.790547] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.790574] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.790651] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.790704] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.790707] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.790719] pnp 00:04: [io 0x00f0]
[ 0.790728] pnp 00:04: [irq 13]
[ 0.790757] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.790769] pnp 00:05: [io 0x002e-0x002f]
[ 0.790771] pnp 00:05: [io 0x004e-0x004f]
[ 0.790773] pnp 00:05: [io 0x0061]
[ 0.790774] pnp 00:05: [io 0x0063]
[ 0.790776] pnp 00:05: [io 0x0065]
[ 0.790777] pnp 00:05: [io 0x0067]
[ 0.790779] pnp 00:05: [io 0x0070]
[ 0.790781] pnp 00:05: [io 0x0080]
[ 0.790782] pnp 00:05: [io 0x0092]
[ 0.790784] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.790786] pnp 00:05: [io 0x0680-0x069f]
[ 0.790787] pnp 00:05: [io 0x0480-0x048f]
[ 0.790789] pnp 00:05: [io 0xffff]
[ 0.790791] pnp 00:05: [io 0xffff]
[ 0.790792] pnp 00:05: [io 0x0400-0x047f]
[ 0.790794] pnp 00:05: [io 0x0480-0x048f]
[ 0.790796] pnp 00:05: [io 0x1180-0x11ff]
[ 0.790798] pnp 00:05: [io 0x164e-0x164f]
[ 0.790799] pnp 00:05: [io 0x5000-0x500f]
[ 0.790801] pnp 00:05: [io 0xfe00]
[ 0.790864] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.790867] system 00:05: [io 0x0480-0x048f] has been reserved
[ 0.790870] system 00:05: [io 0xffff] has been reserved
[ 0.790872] system 00:05: [io 0xffff] has been reserved
[ 0.790875] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.790878] system 00:05: [io 0x0480-0x048f] has been reserved
[ 0.790880] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.790883] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.790885] system 00:05: [io 0x5000-0x500f] has been reserved
[ 0.790888] system 00:05: [io 0xfe00] has been reserved
[ 0.790890] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.790914] pnp 00:06: [io 0x06a0-0x06af]
[ 0.790916] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.790962] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.790965] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.790968] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.790977] pnp 00:07: [io 0x0070-0x0077]
[ 0.790983] pnp 00:07: [irq 8]
[ 0.791012] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.791178] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.791183] pnp 00:08: [irq 4]
[ 0.791257] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.791280] pnp 00:09: [io 0x0060]
[ 0.791282] pnp 00:09: [io 0x0064]
[ 0.791287] pnp 00:09: [irq 1]
[ 0.791322] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.791336] pnp 00:0a: [irq 12]
[ 0.791367] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.791512] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 0.791514] pnp 00:0b: [mem 0xfed10000-0xfed13fff]
[ 0.791516] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 0.791519] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 0.791520] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.791522] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 0.791524] pnp 00:0b: [mem 0xfed40000-0xfed44fff]
[ 0.791526] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 0.791590] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.791593] system 00:0b: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.791595] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.791598] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.791601] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.791603] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.791606] system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.791609] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.791612] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.791904] pnp: PnP ACPI: found 12 devices
[ 0.791905] ACPI: ACPI bus type pnp unregistered
[ 0.798883] PCI: max bus depth: 2 pci_try_num: 3
[ 0.798920] pci 0000:00:1f.3: BAR 0: assigned [mem 0xbf000000-0xbf0000ff 64bit]
[ 0.798929] pci 0000:00:1f.3: BAR 0: set to [mem 0xbf000000-0xbf0000ff 64bit] (PCI address [0xbf000000-0xbf0000ff])
[ 0.798933] pci 0000:00:1e.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
[ 0.798937] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.798940] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.798943] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.798949] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.798953] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.798960] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.798963] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.798969] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.798974] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.798983] pci 0000:06:09.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.798986] pci 0000:06:09.0: BAR 15: assigned [mem 0xc0000000-0xc3ffffff pref]
[ 0.798988] pci 0000:06:09.0: BAR 14: assigned [io 0x4000-0x40ff]
[ 0.798991] pci 0000:06:09.0: BAR 13: assigned [io 0x4400-0x44ff]
[ 0.798993] pci 0000:06:09.0: CardBus bridge to [bus 07-0a]
[ 0.798995] pci 0000:06:09.0: bridge window [io 0x4400-0x44ff]
[ 0.799000] pci 0000:06:09.0: bridge window [io 0x4000-0x40ff]
[ 0.799004] pci 0000:06:09.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
[ 0.799009] pci 0000:06:09.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.799014] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[ 0.799017] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.799023] pci 0000:00:1e.0: bridge window [mem 0xf8500000-0xf85fffff]
[ 0.799027] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xc3ffffff pref]
[ 0.799045] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.799050] pci 0000:00:1c.0: setting latency timer to 64
[ 0.799060] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.799065] pci 0000:00:1c.2: setting latency timer to 64
[ 0.799072] pci 0000:00:1e.0: setting latency timer to 64
[ 0.799095] pci 0000:06:09.0: power state changed by ACPI to D0
[ 0.799099] pci 0000:06:09.0: power state changed by ACPI to D0
[ 0.799108] pci 0000:06:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.799113] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.799116] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.799118] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.799120] pci_bus 0000:00: resource 7 [mem 0x000d8000-0x000dbfff]
[ 0.799122] pci_bus 0000:00: resource 8 [mem 0xbf000000-0xfebfffff]
[ 0.799124] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.799126] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.799129] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.799131] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.799133] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.799135] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.799138] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.799140] pci_bus 0000:06: resource 1 [mem 0xf8500000-0xf85fffff]
[ 0.799142] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc3ffffff pref]
[ 0.799144] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.799146] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.799148] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.799150] pci_bus 0000:06: resource 7 [mem 0x000d8000-0x000dbfff]
[ 0.799152] pci_bus 0000:06: resource 8 [mem 0xbf000000-0xfebfffff]
[ 0.799155] pci_bus 0000:07: resource 0 [io 0x4400-0x44ff]
[ 0.799157] pci_bus 0000:07: resource 1 [io 0x4000-0x40ff]
[ 0.799159] pci_bus 0000:07: resource 2 [mem 0xc0000000-0xc3ffffff pref]
[ 0.799161] pci_bus 0000:07: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.799215] NET: Registered protocol family 2
[ 0.799357] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.800502] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.804550] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.805074] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.805076] TCP reno registered
[ 0.805086] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.805129] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.805289] NET: Registered protocol family 1
[ 0.805307] pci 0000:00:02.0: Boot video device
[ 0.805329] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.805347] pci 0000:00:1a.0: PCI INT A disabled
[ 0.805365] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.805386] pci 0000:00:1a.1: PCI INT B disabled
[ 0.805396] pci 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.805414] pci 0000:00:1a.2: PCI INT C disabled
[ 0.805424] pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.805452] pci 0000:00:1a.7: PCI INT C disabled
[ 0.805471] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.805490] pci 0000:00:1d.0: PCI INT A disabled
[ 0.805498] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.805516] pci 0000:00:1d.1: PCI INT B disabled
[ 0.805524] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.805541] pci 0000:00:1d.2: PCI INT C disabled
[ 0.805551] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.805568] pci 0000:00:1d.7: PCI INT A disabled
[ 0.805620] PCI: CLS 64 bytes, default 64
[ 0.805674] Unpacking initramfs...
[ 1.020703] Freeing initrd memory: 10696k freed
[ 1.024663] Simple Boot Flag at 0x37 set to 0x1
[ 1.025128] audit: initializing netlink socket (disabled)
[ 1.025141] type=2000 audit(1332601783.020:1): initialized
[ 1.046440] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.059649] VFS: Disk quotas dquot_6.5.2
[ 1.059680] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.059751] msgmni has been set to 5932
[ 1.059925] alg: No test for stdrng (krng)
[ 1.059957] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.059960] io scheduler noop registered
[ 1.059961] io scheduler deadline registered
[ 1.059975] io scheduler cfq registered (default)
[ 1.060083] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.060138] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.060217] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.060266] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 1.060361] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.060385] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.060387] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.060580] acpiphp: Slot [1] registered
[ 1.060699] acpiphp: Slot [1-1] registered
[ 1.060800] intel_idle: MWAIT substates: 0x3122220
[ 1.060802] intel_idle: does not run on family 6 model 23
[ 1.060828] ERST: Table is not found!
[ 1.060830] GHES: HEST is not enabled!
[ 1.060891] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.081357] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.144705] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.160251] Linux agpgart interface v0.103
[ 1.160337] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.160432] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.161402] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.161526] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.161654] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.164054] i8042: Detected active multiplexing controller, rev 1.1
[ 1.165895] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.165902] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.165931] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.165956] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.165980] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.166099] mousedev: PS/2 mouse device common for all mice
[ 1.166260] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.166289] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.166298] cpuidle: using governor ladder
[ 1.166300] cpuidle: using governor menu
[ 1.166475] TCP cubic registered
[ 1.166516] NET: Registered protocol family 10
[ 1.166930] Mobile IPv6
[ 1.166933] NET: Registered protocol family 17
[ 1.166936] Registering the dns_resolver key type
[ 1.167052] PM: Hibernation image not present or could not be loaded.
[ 1.167062] registered taskstats version 1
[ 1.174037] rtc_cmos 00:07: setting system clock to 2012-03-24 15:09:43 UTC (1332601783)
[ 1.174099] Initializing network drop monitor service
[ 1.175293] Freeing unused kernel memory: 568k freed
[ 1.175412] Write protecting the kernel read-only data: 6144k
[ 1.177823] Freeing unused kernel memory: 676k freed
[ 1.180266] Freeing unused kernel memory: 668k freed
[ 1.191399] udevd[49]: starting version 175
[ 1.195156] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.214844] usbcore: registered new interface driver usbfs
[ 1.214871] usbcore: registered new interface driver hub
[ 1.230940] SCSI subsystem initialized
[ 1.243444] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 1.243446] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.243487] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.243500] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.243622] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 1.250119] usbcore: registered new device driver usb
[ 1.250713] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.254071] libata version 3.00 loaded.
[ 1.271204] ACPI: Fan [FAN0] (off)
[ 1.273704] sdhci: Secure Digital Host Controller Interface driver
[ 1.273707] sdhci: Copyright(c) Pierre Ossman
[ 1.273926] sdhci-pci 0000:06:09.1: SDHCI controller found [1180:0822] (rev 21)
[ 1.273967] sdhci-pci 0000:06:09.1: power state changed by ACPI to D0
[ 1.273972] sdhci-pci 0000:06:09.1: power state changed by ACPI to D0
[ 1.273982] sdhci-pci 0000:06:09.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.274006] sdhci-pci 0000:06:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.274013] sdhci-pci 0000:06:09.1: setting latency timer to 64
[ 1.274035] mmc0: no vmmc regulator found
[ 1.274061] Registered led device: mmc0::
[ 1.275349] mmc0: SDHCI controller on PCI [0000:06:09.1] using DMA
[ 1.323066] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.323068] ACPI: Thermal Zone [TZ00] (48 C)
[ 1.325562] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.325565] ACPI: Thermal Zone [TZ01] (48 C)
[ 1.325616] ACPI: Fan [FAN1] (off)
[ 1.442303] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:24:54:3a:ea:a0
[ 1.442306] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.442332] e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: FFFFFF-0FF
[ 1.442362] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.442386] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.442390] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.442411] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.442439] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.446340] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.446358] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf8827400
[ 1.460018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.460039] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.460041] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.460043] usb usb1: Product: EHCI Host Controller
[ 1.460045] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 1.460047] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.460152] hub 1-0:1.0: USB hub found
[ 1.460156] hub 1-0:1.0: 6 ports detected
[ 1.460237] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.460250] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.460253] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.460260] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.460286] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.464163] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.464178] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8827800
[ 1.480016] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.480048] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.480051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.480053] usb usb2: Product: EHCI Host Controller
[ 1.480054] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[ 1.480056] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.480149] hub 2-0:1.0: USB hub found
[ 1.480153] hub 2-0:1.0: 6 ports detected
[ 1.480436] ata_piix 0000:00:1f.2: version 2.13
[ 1.480448] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.480453] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.480495] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.480885] scsi0 : ata_piix
[ 1.480963] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.481008] scsi1 : ata_piix
[ 1.481058] ata1: SATA max UDMA/133 cmd 0x1c48 ctl 0x183c bmdma 0x1c30 irq 19
[ 1.481063] ata2: SATA max UDMA/133 cmd 0x1c40 ctl 0x1838 bmdma 0x1c38 irq 19
[ 1.481083] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.481089] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.481129] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.481477] scsi2 : ata_piix
[ 1.481569] scsi3 : ata_piix
[ 1.481616] ata3: SATA max UDMA/133 cmd 0x1ca0 ctl 0x1c94 bmdma 0x1c80 irq 19
[ 1.481621] ata4: SATA max UDMA/133 cmd 0x1c98 ctl 0x1c90 bmdma 0x1c88 irq 19
[ 1.481710] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.481719] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.481722] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.481734] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.481775] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001860
[ 1.481812] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.481815] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.481817] usb usb3: Product: UHCI Host Controller
[ 1.481818] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.481820] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.481922] hub 3-0:1.0: USB hub found
[ 1.481927] hub 3-0:1.0: 2 ports detected
[ 1.481996] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.482004] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.482007] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.482014] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.482049] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 1.482079] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.482081] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.482083] usb usb4: Product: UHCI Host Controller
[ 1.482085] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.482087] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.482180] hub 4-0:1.0: USB hub found
[ 1.482184] hub 4-0:1.0: 2 ports detected
[ 1.482250] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 1.482257] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.482260] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.482266] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.482291] uhci_hcd 0000:00:1a.2: irq 19, io base 0x000018a0
[ 1.482325] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.482328] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.482330] usb usb5: Product: UHCI Host Controller
[ 1.482331] usb usb5: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.482333] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.482417] hub 5-0:1.0: USB hub found
[ 1.482421] hub 5-0:1.0: 2 ports detected
[ 1.482486] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.482493] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.482496] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.482502] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.482527] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000018c0
[ 1.482561] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.482563] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.482565] usb usb6: Product: UHCI Host Controller
[ 1.482567] usb usb6: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.482569] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.482663] hub 6-0:1.0: USB hub found
[ 1.482666] hub 6-0:1.0: 2 ports detected
[ 1.482730] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.482737] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.482741] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.482747] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.482770] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018e0
[ 1.482802] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.482804] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.482806] usb usb7: Product: UHCI Host Controller
[ 1.482808] usb usb7: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.482810] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.482898] hub 7-0:1.0: USB hub found
[ 1.482901] hub 7-0:1.0: 2 ports detected
[ 1.482967] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.482975] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.482978] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.482984] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.483009] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 1.483040] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.483042] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.483044] usb usb8: Product: UHCI Host Controller
[ 1.483046] usb usb8: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[ 1.483048] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.483134] hub 8-0:1.0: USB hub found
[ 1.483138] hub 8-0:1.0: 2 ports detected
[ 1.772019] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[ 1.811089] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.822164] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.956061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.964191] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.964349] ata1.00: ATA-8: OCZ-VERTEX, 1.4, max UDMA/133
[ 1.964352] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.972156] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633B, SC01, max UDMA/100
[ 1.972158] ata2.00: applying bridge limits
[ 1.980263] ata1.00: configured for UDMA/133
[ 1.980373] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX 1.4 PQ: 0 ANSI: 5
[ 1.988160] ata2.00: configured for UDMA/100
[ 1.992144] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633B SC01 PQ: 0 ANSI: 5
[ 1.995949] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.996024] sd 0:0:0:0: [sda] Write Protect is off
[ 1.996027] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.996046] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.997273] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 1.997712] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.005676] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.005680] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.005865] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.024019] Refined TSC clocksource calibration: 2526.999 MHz.
[ 2.024024] Switching to clocksource tsc
[ 2.286140] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 2.286143] EXT4-fs (sda5): write access will be enabled during recovery
[ 2.301311] EXT4-fs (sda5): recovery complete
[ 2.301513] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.462846] usb 1-3: New USB device found, idVendor=174f, idProduct=5931
[ 2.462849] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 2.462851] usb 1-3: Product: USB2.0 UVC PC Camera
[ 2.462853] usb 1-3: Manufacturer: Syntek
[ 2.462854] usb 1-3: SerialNumber: 0001
[ 2.521827] udevd[312]: starting version 175
[ 2.617555] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.618844] ACPI: Lid Switch [LID0]
[ 2.618905] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.618910] ACPI: Power Button [PWRB]
[ 2.618955] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.618958] ACPI: Sleep Button [SLPB]
[ 2.635023] Monitor-Mwait will be used to enter C-1 state
[ 2.637357] ACPI: AC Adapter [ADP1] (on-line)
[ 2.641182] Monitor-Mwait will be used to enter C-2 state
[ 2.645327] Monitor-Mwait will be used to enter C-3 state
[ 2.645336] Marking TSC unstable due to TSC halts in idle
[ 2.645353] ACPI: acpi_idle registered with cpuidle
[ 2.651583] Switching to clocksource hpet
[ 2.670736] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.670742] ACPI: Power Button [PWRF]
[ 2.681823] ACPI: Battery Slot [BAT1] (battery present)
[ 2.687771] iTCO_vendor_support: vendor-support=0
[ 2.687785] cfg80211: Calling CRDA to update world regulatory domain
[ 2.689308] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.689395] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 2.689451] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.702955] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.702960] ACPI: resource 0000:00:1f.3 [io 0x1c60-0x1c7f] conflicts with ACPI region SMBI [io 0x1c60-0x1c6f]
[ 2.702963] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.713742] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.717391] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.717394] Copyright(c) 2003-2011 Intel Corporation
[ 2.717488] iwlwifi 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.717524] iwlwifi 0000:02:00.0: setting latency timer to 64
[ 2.717640] iwlwifi 0000:02:00.0: pci_resource_len = 0x00002000
[ 2.717642] iwlwifi 0000:02:00.0: pci_resource_base = ffffc90000670000
[ 2.717644] iwlwifi 0000:02:00.0: HW Revision ID = 0x0
[ 2.717779] iwlwifi 0000:02:00.0: irq 43 for MSI/MSI-X
[ 2.717862] iwlwifi 0000:02:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
[ 2.717975] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 2.718922] yenta_cardbus 0000:06:09.0: CardBus bridge found [144d:c044]
[ 2.724703] Linux media interface: v0.10
[ 2.728490] Linux video capture interface: v2.00
[ 2.736450] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:5931)
[ 2.737554] iwlwifi 0000:02:00.0: device EEPROM VER=0x11f, CALIB=0x4
[ 2.737556] iwlwifi 0000:02:00.0: Device SKU: 0Xf0
[ 2.738513] iwlwifi 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 2.751702] [drm] Initialized drm 1.1.0 20060810
[ 2.757216] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.757273] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 2.757303] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 2.772239] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692
[ 2.772487] Registered led device: phy0-led
[ 2.776891] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.800942] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 2.811867] cfg80211: World regulatory domain updated:
[ 2.811870] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.811872] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.811875] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.811877] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.811880] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.811882] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.814394] hda_codec: ALC262: BIOS auto-probing.
[ 2.816788] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 2.823967] usbcore: registered new interface driver uvcvideo
[ 2.823969] USB Video Class driver (1.1.1)
[ 2.824186] HDMI status: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 2.824815] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.825330] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.825393] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.825561] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.825565] i915 0000:00:02.0: setting latency timer to 64
[ 2.847831] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 2.847835] yenta_cardbus 0000:06:09.0: Socket status: 30000006
[ 2.847838] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 2.847847] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
[ 2.847849] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [mem 0xf8500000-0xf85fffff]
[ 2.847853] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf8500000-0xf85fffff: excluding 0xf8500000-0xf850ffff
[ 2.847944] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge window: [mem 0xc0000000-0xc3ffffff pref]
[ 2.847946] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0000000-0xc3ffffff: excluding 0xc0000000-0xc3ffffff
[ 2.856513] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd7fff 0xdc000-0xfffff
[ 2.856546] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
[ 2.856570] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 2.871003] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 2.871009] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.871011] [drm] Driver supports precise vblank timestamp query.
[ 2.871048] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.944021] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[ 3.110102] usb 4-2: New USB device found, idVendor=08ff, idProduct=1600
[ 3.110106] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.110108] usb 4-2: Product: Fingerprint Sensor
[ 3.352043] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 3.523831] usb 7-1: New USB device found, idVendor=0a5c, idProduct=2101
[ 3.523834] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.523836] usb 7-1: Product: BCM92045NMD
[ 3.523838] usb 7-1: Manufacturer: Broadcom Corp
[ 3.523839] usb 7-1: SerialNumber: 0C6076C5301C
[ 3.535029] Bluetooth: Core ver 2.16
[ 3.535051] NET: Registered protocol family 31
[ 3.535053] Bluetooth: HCI device and connection manager initialized
[ 3.535055] Bluetooth: HCI socket layer initialized
[ 3.535057] Bluetooth: L2CAP socket layer initialized
[ 3.535162] Bluetooth: SCO socket layer initialized
[ 3.536785] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.537158] usbcore: registered new interface driver btusb
[ 3.551309] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0
[ 3.587064] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 4.034640] fbcon: inteldrmfb (fb0) is primary device
[ 4.076128] HDMI hot plug event: Codec=2 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 4.076165] HDMI status: Codec=2 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 4.079372] HDMI: detected monitor PLE2607WS at connection type HDMI
[ 4.079374] HDMI: available speakers: FL/FR
[ 4.079377] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16
[ 4.129863] Console: switching to colour frame buffer device 210x65
[ 4.135486] fb0: inteldrmfb frame buffer device
[ 4.135488] drm: registered panic notifier
[ 4.136594] ACPI Warning: _BQC returned an invalid level (20110623/video-472)
[ 4.137005] acpi device:09: registered as cooling_device4
[ 4.137111] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
[ 4.137158] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.137239] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.318392] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 4.374395] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 4.384383] device-mapper: uevent: version 1.0.3
[ 4.384580] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 8.025274] Intel AES-NI instructions are not detected.
[ 8.054122] padlock_sha: VIA PadLock Hash Engine not detected.
[ 8.285237] loop: module loaded
[ 8.773565] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 8.795552] kjournald starting. Commit interval 5 seconds
[ 8.795926] EXT3-fs (sda2): using internal journal
[ 8.795929] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 8.828200] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 8.834802] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 9.034538] RPC: Registered named UNIX socket transport module.
[ 9.034540] RPC: Registered udp transport module.
[ 9.034542] RPC: Registered tcp transport module.
[ 9.034543] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.039739] FS-Cache: Loaded
[ 9.049920] FS-Cache: Netfs 'nfs' registered for caching
[ 9.055641] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.133496] fuse init (API version 7.17)
[ 9.910292] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 9.964094] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
[ 9.964614] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.289170] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 10.596543] lp: driver loaded but no devices found
[ 10.601954] ppdev: user-space parallel port driver
[ 11.232471] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 11.232898] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
[ 11.385107] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 11.385536] iwlwifi 0000:02:00.0: Radio type=0x0-0x2-0x0
[ 11.435325] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.950420] HDMI hot plug event: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 12.950495] HDMI status: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 13.056184] HDMI hot plug event: Codec=2 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.056244] HDMI status: Codec=2 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 13.059772] HDMI: detected monitor PLE2607WS at connection type HDMI
[ 13.059778] HDMI: available speakers: FL/FR
[ 13.059787] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16
[ 13.220938] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 13.221417] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.615398] HDMI hot plug event: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 18.615445] HDMI status: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 18.712192] HDMI hot plug event: Codec=2 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 18.712230] HDMI status: Codec=2 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 18.714945] HDMI: detected monitor PLE2607WS at connection type HDMI
[ 18.714948] HDMI: available speakers: FL/FR
[ 18.714951] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16
[ 19.692415] HDMI hot plug event: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=1
[ 19.692463] HDMI status: Codec=2 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 19.787007] HDMI hot plug event: Codec=2 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 19.787056] HDMI status: Codec=2 Pin=3 Presence_Detect=1 ELD_Valid=1
[ 19.790032] HDMI: detected monitor PLE2607WS at connection type HDMI
[ 19.790034] HDMI: available speakers: FL/FR
[ 19.790037] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16
[ 23.396007] eth0: no IPv6 routers present
[ 77.730048] BUG: unable to handle kernel paging request at ffffc9001121622c
[ 77.733551] IP: [<ffffffff8124714e>] i965_write_entry+0x32/0x35
[ 77.733551] PGD bc023067 PUD bc024067 PMD b5ca5067 PTE 0
[ 77.733551] Oops: 0002 [#1] SMP
[ 77.733551] CPU 1
[ 77.733551] Modules linked in: acpi_cpufreq mperf cpufreq_conservative cpufreq_stats cpufreq_userspace cpufreq_powersave parport_pc ppdev lp parport uinput fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc ext3 jbd loop sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod joydev btusb bluetooth pcmcia snd_hda_codec_hdmi snd_hda_codec_realtek arc4 i915 snd_hda_intel snd_hda_codec drm_kms_helper evdev drm snd_hwdep snd_pcm snd_seq i2c_algo_bit snd_timer snd_seq_device uvcvideo videodev media v4l2_compat_ioctl32 yenta_socket pcmcia_rsrc iwlwifi pcmcia_core psmouse pcspkr serio_raw mac80211 i2c_i801 iTCO_wdt iTCO_vendor_support cfg80211 rfkill snd battery container i2c_core soundcore snd_page_alloc ac video power_supply button processor ext4 mbcache jbd2 crc16 sr_mod cdrom sd_mod crc_t10dif ata_generic uhci_hcd sdhci_pci sdhci mmc_core fan thermal thermal_sys ata_piix ehci_hcd libata e1000e scsi_mod usbcore usb_common [last unloaded: scsi_wait_scan]
[ 77.733551]
[ 77.733551] Pid: 1797, comm: Xorg Not tainted 3.2.0-2-amd64 #1 SAMSUNG ELECTRONICS CO., LTD. P560 /P560
[ 77.733551] RIP: 0010:[<ffffffff8124714e>] [<ffffffff8124714e>] i965_write_entry+0x32/0x35
[ 77.733551] RSP: 0018:ffff8800b7e13ac0 EFLAGS: 00010282
[ 77.733551] RAX: 00000000b0cab001 RBX: 0000000000000001 RCX: ffffffff8143c450
[ 77.733551] RDX: 00000000b0cab000 RSI: ffffc9001121622c RDI: 00000000b0cab000
[ 77.733551] RBP: 000000000000588b R08: 0000000000000000 R09: ffffc90011200000
[ 77.733551] R10: 00000000000036b6 R11: 00000000000036b6 R12: 0000000000000000
[ 77.733551] R13: 0000000000010000 R14: ffff8800a76606a0 R15: 0000000000000001
[ 77.733551] FS: 00007fac33abf880(0000) GS:ffff8800bc500000(0000) knlGS:0000000000000000
[ 77.733551] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 77.733551] CR2: ffffc9001121622c CR3: 0000000037329000 CR4: 00000000000406e0
[ 77.733551] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 77.733551] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 77.733551] Process Xorg (pid: 1797, threadinfo ffff8800b7e12000, task ffff8800374a95d0)
[ 77.733551] Stack:
[ 77.733551] ffffffff8124820e ffff8800a76606a0 0000000000000000 000012d000000000
[ 77.733551] ffff8800b6683a00 0000000000010000 0000000000001000 ffff8800b7ad2000
[ 77.733551] 0000000000000001 0000000000000001 ffffffffa0392820 ffff8800b6683a00
[ 77.733551] Call Trace:
[ 77.733551] [<ffffffff8124820e>] ? intel_gtt_insert_sg_entries+0x45/0x8d
[ 77.733551] [<ffffffffa0392820>] ? i915_gem_gtt_bind_object+0x98/0xc6 [i915]
[ 77.733551] [<ffffffffa038ca9a>] ? i915_gem_object_bind_to_gtt+0x34c/0x495 [i915]
[ 77.733551] [<ffffffffa038eec7>] ? i915_gem_object_pin+0xb9/0x12d [i915]
[ 77.733551] [<ffffffffa03916f3>] ? i915_gem_do_execbuffer.isra.6+0x2d3/0x1016 [i915]
[ 77.946355] [<ffffffffa03912e2>] ? i915_gem_execbuffer_reserve.isra.4+0x1b3/0x2e7 [i915]
[ 77.946355] [<ffffffffa0391842>] ? i915_gem_do_execbuffer.isra.6+0x422/0x1016 [i915]
[ 77.946355] [<ffffffffa038d6cb>] ? i915_gem_object_put_fence+0x1e/0x69 [i915]
[ 77.946355] [<ffffffffa0392699>] ? i915_gem_execbuffer2+0x49/0x138 [i915]
[ 77.946355] [<ffffffffa0392728>] ? i915_gem_execbuffer2+0xd8/0x138 [i915]
[ 77.946355] [<ffffffffa032d61f>] ? drm_ioctl+0x289/0x35e [drm]
[ 77.946355] [<ffffffffa0392650>] ? i915_gem_execbuffer+0x21a/0x21a [i915]
[ 77.946355] [<ffffffff811adfdc>] ? timerqueue_del+0x53/0x63
[ 77.946355] [<ffffffff81061cfe>] ? __remove_hrtimer+0x2a/0x82
[ 77.946355] [<ffffffff811065d9>] ? do_vfs_ioctl+0x459/0x49a
[ 77.946355] [<ffffffff81106665>] ? sys_ioctl+0x4b/0x72
[ 77.946355] [<ffffffff8134e012>] ? system_call_fastpath+0x16/0x1b
[ 77.946355] Code: 01 00 00 00 ba 07 00 00 00 0f 44 c2 48 89 fa 4c 8b 0d 6f 39 5b 00 48 c1 ea 1c 89 f6 81 e2 f0 00 00 00 48 09 fa 49 8d 34 b1 09 d0 <89> 06 c3 b0 01 c3 89 d1 b8 03 00 00 00 83 e1 f7 81 f9 00 00 01
[ 77.946355] RIP [<ffffffff8124714e>] i965_write_entry+0x32/0x35
[ 77.946355] RSP <ffff8800b7e13ac0>
[ 77.946355] CR2: ffffc9001121622c
[ 77.946355] ---[ end trace 5798bf59ca158c7f ]---
** Model information
sys_vendor: SAMSUNG ELECTRONICS CO., LTD.
product_name: P560
product_version: Cantiga
chassis_vendor: SAMSUNG ELECTRONICS CO., LTD.
chassis_version: N/A
bios_vendor: Phoenix Technologies Ltd.
bios_version: 03LV.MP00.20100121.hkk
board_vendor: SAMSUNG ELECTRONICS CO., LTD.
board_name: P560
board_version: ICH9M
** Loaded modules:
acpi_cpufreq
mperf
cpufreq_conservative
cpufreq_stats
cpufreq_userspace
cpufreq_powersave
parport_pc
ppdev
lp
parport
uinput
fuse
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
ext3
jbd
loop
sha256_generic
cryptd
aes_x86_64
aes_generic
cbc
dm_crypt
dm_mod
joydev
btusb
bluetooth
arc4
pcmcia
snd_hda_codec_hdmi
i915
snd_hda_codec_realtek
evdev
uvcvideo
drm_kms_helper
drm
videodev
i2c_algo_bit
media
v4l2_compat_ioctl32
iTCO_wdt
iTCO_vendor_support
yenta_socket
pcmcia_rsrc
psmouse
pcmcia_core
serio_raw
pcspkr
snd_hda_intel
i2c_i801
snd_hda_codec
iwlwifi
snd_hwdep
snd_pcm
snd_seq
snd_timer
snd_seq_device
mac80211
cfg80211
rfkill
battery
container
snd
soundcore
snd_page_alloc
i2c_core
ac
power_supply
video
button
processor
ext4
mbcache
jbd2
crc16
sd_mod
sr_mod
crc_t10dif
cdrom
ata_generic
uhci_hcd
thermal
fan
thermal_sys
ata_piix
ehci_hcd
e1000e
sdhci_pci
sdhci
mmc_core
libata
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 45
Region 0: Memory at f8000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8400000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07)
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8827000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f8600000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f8625000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at f8827400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f8620000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f4000000-f5ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f6000000-f7ffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f8827800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0a, sec-latency=32
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f8500000-f85fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] [8086:2928] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 1c48 [size=8]
Region 1: I/O ports at 183c [size=4]
Region 2: I/O ports at 1c40 [size=8]
Region 3: I/O ports at 1838 [size=4]
Region 4: I/O ports at 1c30 [size=16]
Region 5: I/O ports at 1c20 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at bf000000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] [8086:292d] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 1ca0 [size=8]
Region 1: I/O ports at 1c94 [size=4]
Region 2: I/O ports at 1c98 [size=8]
Region 3: I/O ports at 1c90 [size=4]
Region 4: I/O ports at 1c80 [size=16]
Region 5: I/O ports at 1c50 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 5
Region 0: Memory at f8626000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Intel Corporation Ultimate N WiFi Link 5300 [8086:4235]
Subsystem: Intel Corporation Device [8086:1001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
06:09.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f8500000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=0a, sec-latency=176
Memory window 0: c0000000-c3fff000 (prefetchable)
Memory window 1: c4000000-c7fff000
I/O window 0: 00004400-000044ff
I/O window 1: 00004000-000040ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
06:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21)
Subsystem: Samsung Electronics Co Ltd Device [144d:c044]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f8501000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 174f:5931 Syntek
Bus 004 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600
Bus 007 Device 002: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.101
ii linux-base 3.5
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-2-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-2-amd64 suggests:
pn grub-pc 1.99-17
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi 0.35
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64:
linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true
linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64: false
Reply to: