Bug#659484: ath9k: kernel module ath9k problem with WEP
Package: linux-2.6
Version: 3.2.4-1
Severity: normal
File: ath9k
Hello dear maintainers,
after upgrading to löinux-image 3.2.0 I detected a problem with my wireless
router. I suppose, it is related to kernel module "ath9k", which is
responsible for my Atheros wireless card in my EEEPC 1005 HGO.
I tried two ways of connecting. The first one is using the file
/etc/network/interfaces. As in the past, I am using a static IP.
Connection is working, I get the IP, but I can never ping to the gateway.
The other way is using wicd. With wicd, it is showing me the connection,
but never gets an IP. Ping does not work, too, and the line test of wicd
fails.
WPA/WPA2 is working with this module like a charme. Also another computer
with an Atheros card, but "ath5k" module, can connect on the same router
with WEP like a charme.
Thus I guess, the module "ath9k" of the kernel might be buggy.
Besides: I know, WEP is outdated, but I use an older router with only WEP
availablke. But as its PA is defective and sending only just with 1mW (range approx.
5m) this is the best protection against sniffers. So I would like to use it further more.
Thank you for reading my message!
Best regards
Hans
-- Package-specific info:
** Version:
Linux version 3.2.0-1-686-pae (Debian 3.2.4-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 SMP Sun Feb 5 23:52:49 UTC 2012
** Command line:
root=UUID=ea6e761d-8e68-49a0-8674-0cc112025d91 ro quiet acpi_osi="Linux"
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[58384.155272] wlan0: deauthenticating from 00:06:25:ed:1f:e7 by local choice (reason=3)
[58384.194872] cfg80211: Calling CRDA to update world regulatory domain
[58385.399068] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58385.506667] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58386.076090] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second
[58386.099541] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[58386.316316] atl1c 0000:01:00.0: Error get phy ID
[58386.317416] ADDRCONF(NETDEV_UP): eth0: link is not ready
[58546.794024] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58547.400108] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second
[58547.424283] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[58547.648328] atl1c 0000:01:00.0: Error get phy ID
[58547.649394] ADDRCONF(NETDEV_UP): eth0: link is not ready
[58547.927157] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58550.270757] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1)
[58550.272671] wlan0: authenticated
[58550.272765] wlan0: associate with 00:06:25:ed:1f:e7 (try 1)
[58550.274975] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=3)
[58550.274985] wlan0: associated
[58550.275468] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[58561.128129] wlan0: no IPv6 routers present
[58590.174273] wlan0: deauthenticating from 00:06:25:ed:1f:e7 by local choice (reason=3)
[58590.214820] cfg80211: Calling CRDA to update world regulatory domain
[58594.398407] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58594.511036] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58595.092116] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second
[58595.115045] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[58595.332340] atl1c 0000:01:00.0: Error get phy ID
[58595.333415] ADDRCONF(NETDEV_UP): eth0: link is not ready
[58750.734408] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58751.304110] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second
[58751.328515] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[58751.548340] atl1c 0000:01:00.0: Error get phy ID
[58751.549416] ADDRCONF(NETDEV_UP): eth0: link is not ready
[58751.860093] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58754.194671] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1)
[58754.198465] wlan0: authenticated
[58754.198598] wlan0: associate with 00:06:25:ed:1f:e7 (try 1)
[58754.201028] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=3)
[58754.201043] wlan0: associated
[58754.201782] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[58764.752091] wlan0: no IPv6 routers present
[58794.113219] wlan0: deauthenticating from 00:06:25:ed:1f:e7 by local choice (reason=3)
[58794.154772] cfg80211: Calling CRDA to update world regulatory domain
[58798.388367] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58798.501233] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58799.112130] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second
[58799.203751] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[58799.420311] atl1c 0000:01:00.0: Error get phy ID
[58799.421380] ADDRCONF(NETDEV_UP): eth0: link is not ready
[58954.727020] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58955.340103] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second
[58955.364512] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[58955.584322] atl1c 0000:01:00.0: Error get phy ID
[58955.585370] ADDRCONF(NETDEV_UP): eth0: link is not ready
[58955.904477] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[58958.230734] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1)
[58958.232914] wlan0: authenticated
[58958.233005] wlan0: associate with 00:06:25:ed:1f:e7 (try 1)
[58958.235491] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=3)
[58958.235502] wlan0: associated
[58958.236357] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[58968.576059] wlan0: no IPv6 routers present
[58997.278910] wlan0: deauthenticating from 00:06:25:ed:1f:e7 by local choice (reason=3)
[58997.315721] cfg80211: Calling CRDA to update world regulatory domain
[59002.321206] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[59002.439755] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[59003.020106] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second
[59003.043621] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[59003.260308] atl1c 0000:01:00.0: Error get phy ID
[59003.261366] ADDRCONF(NETDEV_UP): eth0: link is not ready
[59052.863433] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[59053.436121] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second
[59053.459375] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[59053.676337] atl1c 0000:01:00.0: Error get phy ID
[59053.679466] ADDRCONF(NETDEV_UP): eth0: link is not ready
[59054.001244] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[59056.352267] wlan0: authenticate with 00:06:25:ed:1f:e7 (try 1)
[59056.354529] wlan0: authenticated
[59056.354625] wlan0: associate with 00:06:25:ed:1f:e7 (try 1)
[59056.357106] wlan0: RX AssocResp from 00:06:25:ed:1f:e7 (capab=0x1 status=0 aid=3)
[59056.357117] wlan0: associated
[59056.357655] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[59066.432079] wlan0: no IPv6 routers present
[59081.715204] wlan0: deauthenticating from 00:06:25:ed:1f:e7 by local choice (reason=3)
[59081.743025] cfg80211: Calling CRDA to update world regulatory domain
[59086.574255] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[59204.343146] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[59204.968120] atl1c 0000:01:00.0: MAC state machine can't be idle since disabled for 10ms second
[59204.992316] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[59205.212321] atl1c 0000:01:00.0: Error get phy ID
[59205.213418] ADDRCONF(NETDEV_UP): eth0: link is not ready
[59205.574773] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[59208.032733] wlan0: authenticate with 00:24:fe:12:bf:34 (try 1)
[59208.034640] wlan0: authenticated
[59208.034706] wlan0: associate with 00:24:fe:12:bf:34 (try 1)
[59208.038637] wlan0: RX AssocResp from 00:24:fe:12:bf:34 (capab=0x411 status=0 aid=1)
[59208.038651] wlan0: associated
[59208.039429] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[59218.880077] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
iptable_filter
ip_tables
x_tables
ath9k
snd_hrtimer
nfnetlink_log
nfnetlink
acpi_cpufreq
mperf
cpufreq_stats
cpufreq_powersave
cpufreq_userspace
cpufreq_conservative
irda
crc_ccitt
decnet
parport_pc
ppdev
lp
parport
rfcomm
bnep
uinput
fan
fuse
ext2
sbs
sbshc
max6650
coretemp
gspca_sn9c20x
gspca_main
loop
atl1
mii
lrw
gf128mul
snd_hda_codec_realtek
option
arc4
usb_wwan
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
i915
snd_mixer_oss
snd_pcm
joydev
uvcvideo
snd_seq_midi
usbserial
snd_rawmidi
btusb
videodev
bluetooth
mac80211
snd_seq_midi_event
media
drm_kms_helper
iTCO_wdt
crc16
snd_seq
snd_timer
drm
ath9k_common
iTCO_vendor_support
snd_seq_device
ath9k_hw
ac
ath
rng_core
cfg80211
evdev
i2c_algo_bit
snd
battery
power_supply
soundcore
snd_page_alloc
psmouse
i2c_core
serio_raw
video
eeepc_laptop
sparse_keymap
rfkill
pci_hotplug
button
processor
ext3
mbcache
jbd
sha256_generic
dm_crypt
dm_mod
cryptd
aes_i586
aes_generic
usb_storage
uas
sd_mod
crc_t10dif
ahci
libahci
libata
uhci_hcd
scsi_mod
thermal
thermal_sys
ehci_hcd
usbcore
atl1c
usb_common
** Network interface configuration:
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE@euro, LC_CTYPE=de_DE@euro (charmap=UTF-8) (ignored: LC_ALL set to de_DE.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-1-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-26
Versions of packages linux-image-3.2.0-1-686-pae suggests:
pn extlinux 2:4.05+dfsg-2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux 0.35
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-1-686-pae/postinst/missing-firmware-3.2.0-1-686-pae:
linux-image-3.2.0-1-686-pae/prerm/removing-running-kernel-3.2.0-1-686-pae: true
linux-image-3.2.0-1-686-pae/postinst/ignoring-ramdisk:
linux-image-3.2.0-1-686-pae/postinst/depmod-error-initrd-3.2.0-1-686-pae: false
Reply to: