Bug#652056: 3.2.1-2 dmesg attachment
Hello again
Sorry about this
Here you will find attached the dmesg of 3.2.1-2 kernel, as I forgot to
attach it in the previous email.
Take care
:~$ sudo dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-1-486 (Debian 3.2.1-2) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-12) ) #1 Tue Jan 24 05:05:24 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003fff0c00 (reserved)
[ 0.000000] BIOS-e820: 000000003fff0c00 - 000000003fffc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fffc000 - 0000000040000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Hewlett-Packard HP compaq nx7000 (DG705A#AB7) /0860, BIOS 68BAL Ver. F.55 07/14/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 36cb6000 - 37653000
[ 0.000000] ACPI: RSDP 000f6560 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 3fff0c84 0002C (v01 HP CPQ0860 14070520 CPQ 00000001)
[ 0.000000] ACPI: FACP 3fff0c00 00084 (v02 HP CPQ0860 00000002 CPQ 00000001)
[ 0.000000] ACPI: DSDT 3fff0cb0 04F8C (v01 HP nx7000 00010000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fffbe80 00040
[ 0.000000] ACPI: SSDT 3fff5c3c 0028A (v01 COMPAQ CPQGysr 00001001 MSFT 0100000E)
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003ffd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ffd0
[ 0.000000] On node 0 totalpages: 261983
[ 0.000000] free_area_init_node: node 0, pgdat c13bf2f8, node_mem_map f64b6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34498 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:c0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259935
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-1-486 root=UUID=2189f3c0-2bb2-4518-9eb0-b44d36cd167c ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffd0)
[ 0.000000] Memory: 1024204k/1048384k available (2559k kernel code, 23728k reserved, 1307k data, 444k init, 139080k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13c7000 - 0xc1436000 ( 444 kB)
[ 0.000000] .data : 0xc127fe6c - 0xc13c6b40 (1307 kB)
[ 0.000000] .text : 0xc1000000 - 0xc127fe6c (2559 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f6006000 soft=f6008000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1495.108 MHz processor.
[ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2990.21 BogoMIPS (lpj=5980432)
[ 0.008010] pid_max: default: 32768 minimum: 301
[ 0.008072] Security Framework initialized
[ 0.008083] AppArmor: AppArmor disabled by boot time parameter
[ 0.008102] Mount-cache hash table entries: 512
[ 0.008277] Initializing cgroup subsys cpuacct
[ 0.008284] Initializing cgroup subsys memory
[ 0.008296] Initializing cgroup subsys devices
[ 0.008299] Initializing cgroup subsys freezer
[ 0.008303] Initializing cgroup subsys net_cls
[ 0.008307] Initializing cgroup subsys blkio
[ 0.008372] CPU: Intel(R) Pentium(R) M processor 1500MHz stepping 05
[ 0.008986] ACPI: Core revision 20110623
[ 0.013807] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.016076] Performance Events:
[ 0.016080] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.016083] no hardware sampling interrupt available.
[ 0.016086] p6 PMU driver.
[ 0.016091] ... version: 0
[ 0.016093] ... bit width: 32
[ 0.016096] ... generic registers: 2
[ 0.016098] ... value mask: 00000000ffffffff
[ 0.016101] ... max period: 000000007fffffff
[ 0.016104] ... fixed-purpose events: 0
[ 0.016106] ... event mask: 0000000000000003
[ 0.016350] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[ 0.016535] devtmpfs: initialized
[ 0.016700] PM: Registering ACPI NVS region at 3fff0c00 (46080 bytes)
[ 0.016992] print_constraints: dummy:
[ 0.017069] NET: Registered protocol family 16
[ 0.017204] EISA bus registered
[ 0.017250] ACPI: bus type pci registered
[ 0.018689] PCI: PCI BIOS revision 2.10 entry at 0xf031f, last bus=3
[ 0.018692] PCI: Using configuration type 1 for base access
[ 0.019583] bio: create slab <bio-0> at 0
[ 0.019680] ACPI: Added _OSI(Module Device)
[ 0.019683] ACPI: Added _OSI(Processor Device)
[ 0.019687] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.019690] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.020765] ACPI: EC: Look up EC in DSDT
[ 0.029642] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.188027] ACPI: Interpreter enabled
[ 0.188042] ACPI: (supports S0 S3 S4 S5)
[ 0.188070] ACPI: Using PIC for interrupt routing
[ 0.189960] ACPI: Power Resource [C18D] (on)
[ 0.190595] ACPI: Power Resource [C195] (on)
[ 0.191245] ACPI: Power Resource [C19C] (on)
[ 0.228158] ACPI: Power Resource [C1A6] (on)
[ 0.268004] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.268209] ACPI: No dock devices found.
[ 0.268212] HEST: Table not found.
[ 0.268220] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.273400] ACPI: PCI Root Bridge [C046] (domain 0000 [bus 00-ff])
[ 0.283794] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.283799] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.283803] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.283808] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfec00fff] (ignored)
[ 0.283812] pci_root PNP0A03:00: host bridge window [mem 0xfec02000-0xffffffff] (ignored)
[ 0.283817] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.283835] pci 0000:00:00.0: [8086:3340] type 0 class 0x000600
[ 0.283845] pci 0000:00:00.0: reg 10: [mem 0xb0000000-0xbfffffff pref]
[ 0.283890] pci 0000:00:01.0: [8086:3341] type 1 class 0x000604
[ 0.283949] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[ 0.283995] pci 0000:00:1d.0: reg 20: [io 0x48c0-0x48df]
[ 0.284045] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[ 0.284090] pci 0000:00:1d.1: reg 20: [io 0x48e0-0x48ff]
[ 0.284125] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[ 0.284170] pci 0000:00:1d.2: reg 20: [io 0x4c00-0x4c1f]
[ 0.284218] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[ 0.284241] pci 0000:00:1d.7: reg 10: [mem 0xa0000000-0xa00003ff]
[ 0.284322] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.284328] pci 0000:00:1d.7: PME# disabled
[ 0.284347] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.284392] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601
[ 0.284460] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.284467] pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH4 GPIO
[ 0.284484] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101
[ 0.284499] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.284511] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.284522] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.284533] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.284544] pci 0000:00:1f.1: reg 20: [io 0x4c40-0x4c4f]
[ 0.284556] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.284586] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[ 0.284632] pci 0000:00:1f.3: reg 20: [io 0x4c20-0x4c3f]
[ 0.284670] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401
[ 0.284687] pci 0000:00:1f.5: reg 10: [io 0x4000-0x40ff]
[ 0.284698] pci 0000:00:1f.5: reg 14: [io 0x4880-0x48bf]
[ 0.284708] pci 0000:00:1f.5: reg 18: [mem 0xa0200000-0xa02001ff]
[ 0.284719] pci 0000:00:1f.5: reg 1c: [mem 0xa0300000-0xa03000ff]
[ 0.284758] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.284764] pci 0000:00:1f.5: PME# disabled
[ 0.284783] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703
[ 0.284800] pci 0000:00:1f.6: reg 10: [io 0x4400-0x44ff]
[ 0.284810] pci 0000:00:1f.6: reg 14: [io 0x4800-0x487f]
[ 0.284863] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.284868] pci 0000:00:1f.6: PME# disabled
[ 0.284895] pci 0000:01:00.0: [1002:4c66] type 0 class 0x000300
[ 0.284911] pci 0000:01:00.0: reg 10: [mem 0x98000000-0x9fffffff pref]
[ 0.284921] pci 0000:01:00.0: reg 14: [io 0x3000-0x30ff]
[ 0.284930] pci 0000:01:00.0: reg 18: [mem 0x90400000-0x9040ffff]
[ 0.284955] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.284975] pci 0000:01:00.0: supports D1 D2
[ 0.285011] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.285015] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.285020] pci 0000:00:01.0: bridge window [mem 0x90400000-0x904fffff]
[ 0.285025] pci 0000:00:01.0: bridge window [mem 0x98000000-0x9fffffff pref]
[ 0.285053] pci 0000:02:00.0: [1106:3044] type 0 class 0x000c00
[ 0.285071] pci 0000:02:00.0: reg 10: [mem 0x90200000-0x902007ff]
[ 0.285083] pci 0000:02:00.0: reg 14: [io 0x2400-0x247f]
[ 0.285139] pci 0000:02:00.0: supports D2
[ 0.285143] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.285148] pci 0000:02:00.0: PME# disabled
[ 0.285167] pci 0000:02:01.0: [10ec:8139] type 0 class 0x000200
[ 0.285185] pci 0000:02:01.0: reg 10: [io 0x2000-0x20ff]
[ 0.285196] pci 0000:02:01.0: reg 14: [mem 0x90300000-0x903000ff]
[ 0.285251] pci 0000:02:01.0: supports D1 D2
[ 0.285254] pci 0000:02:01.0: PME# supported from D1 D2 D3hot D3cold
[ 0.285260] pci 0000:02:01.0: PME# disabled
[ 0.285279] pci 0000:02:02.0: [8086:1043] type 0 class 0x000280
[ 0.285297] pci 0000:02:02.0: reg 10: [mem 0x90000000-0x90000fff]
[ 0.285377] pci 0000:02:04.0: [1524:1410] type 2 class 0x000607
[ 0.285396] pci 0000:02:04.0: reg 10: [mem 0x90100000-0x90100fff]
[ 0.285415] pci 0000:02:04.0: supports D1 D2
[ 0.285419] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.285424] pci 0000:02:04.0: PME# disabled
[ 0.285462] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[ 0.285468] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.285474] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x903fffff]
[ 0.285481] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.285485] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.285522] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[ 0.285536] pci_bus 0000:00: on NUMA node 0
[ 0.285541] ACPI: PCI Interrupt Routing Table [\_SB_.C046._PRT]
[ 0.285608] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C047._PRT]
[ 0.285636] ACPI: PCI Interrupt Routing Table [\_SB_.C046.C058._PRT]
[ 0.285751] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.295004] ACPI: PCI Interrupt Link [C0C2] (IRQs 5 *10)
[ 0.295132] ACPI: PCI Interrupt Link [C0C3] (IRQs 5 *10)
[ 0.295256] ACPI: PCI Interrupt Link [C0C4] (IRQs *5 10)
[ 0.295380] ACPI: PCI Interrupt Link [C0C5] (IRQs *5 10)
[ 0.295491] ACPI: PCI Interrupt Link [C0C6] (IRQs 5 10) *0, disabled.
[ 0.295616] ACPI: PCI Interrupt Link [C0C7] (IRQs 5 10) *11
[ 0.295728] ACPI: PCI Interrupt Link [C0C8] (IRQs 5 10) *0, disabled.
[ 0.295853] ACPI: PCI Interrupt Link [C0C9] (IRQs *5 10)
[ 0.296010] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.296023] vgaarb: loaded
[ 0.296025] vgaarb: bridge control possible 0000:01:00.0
[ 0.296089] PCI: Using ACPI for IRQ routing
[ 0.296094] PCI: pci_cache_line_size set to 64 bytes
[ 0.296159] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.296163] reserve RAM buffer: 000000003ffd0000 - 000000003fffffff
[ 0.296330] Switching to clocksource pit
[ 0.298402] pnp: PnP ACPI init
[ 0.298429] ACPI: bus type pnp registered
[ 0.298596] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.298600] pnp 00:00: [mem 0x000e0000-0x000fffff]
[ 0.298604] pnp 00:00: [mem 0x00100000-0x3fffffff]
[ 0.298686] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.298692] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.298697] system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.298702] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.303618] pnp 00:01: [bus 00-ff]
[ 0.303623] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.303627] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.303631] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.303635] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.303639] pnp 00:01: [mem 0x40000000-0xfec00fff window]
[ 0.303643] pnp 00:01: [mem 0xfec02000-0xffffffff window]
[ 0.303647] pnp 00:01: [mem 0x000d0000-0x000dffff window]
[ 0.303763] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.303969] pnp 00:02: Plug and Play ACPI device, IDs WEC0518 (disabled)
[ 0.304609] pnp 00:03: [io 0x03f8-0x03ff]
[ 0.304614] pnp 00:03: [irq 4]
[ 0.304702] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 0.305415] pnp 00:04: [io 0x03e8-0x03ef]
[ 0.305419] pnp 00:04: [io 0x07d0-0x07d7]
[ 0.305423] pnp 00:04: [irq 3]
[ 0.305427] pnp 00:04: [dma 3]
[ 0.305548] pnp 00:04: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active)
[ 0.306253] pnp 00:05: [io 0x0378-0x037f]
[ 0.306257] pnp 00:05: [io 0x0778-0x077a]
[ 0.306261] pnp 00:05: [irq 7]
[ 0.306264] pnp 00:05: [dma 1]
[ 0.306427] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.306444] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.306448] pnp 00:06: [irq 13]
[ 0.306491] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.306509] pnp 00:07: [io 0x0000-0x000f]
[ 0.306513] pnp 00:07: [io 0x0080-0x008f]
[ 0.306516] pnp 00:07: [io 0x00c0-0x00df]
[ 0.306520] pnp 00:07: [dma 4]
[ 0.306563] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.306577] pnp 00:08: [io 0x0061]
[ 0.306622] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.306637] pnp 00:09: [io 0x0070-0x0071]
[ 0.306641] pnp 00:09: [io 0x0072-0x0073]
[ 0.306644] pnp 00:09: [irq 8]
[ 0.306688] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.306702] pnp 00:0a: [io 0x0060]
[ 0.306706] pnp 00:0a: [io 0x0064]
[ 0.306709] pnp 00:0a: [irq 1]
[ 0.306765] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.306780] pnp 00:0b: [irq 12]
[ 0.306838] pnp 00:0b: Plug and Play ACPI device, IDs SYN0107 SYN0100 SYN0002 PNP0f13 (active)
[ 0.306916] pnp 00:0c: [io 0x0010-0x001f]
[ 0.306920] pnp 00:0c: [io 0x0024-0x003f]
[ 0.306924] pnp 00:0c: [io 0x002e-0x002f]
[ 0.306927] pnp 00:0c: [io 0x0050-0x0053]
[ 0.306930] pnp 00:0c: [io 0x0068-0x006f]
[ 0.306934] pnp 00:0c: [io 0x0074-0x0077]
[ 0.306937] pnp 00:0c: [io 0x0090-0x009f]
[ 0.306941] pnp 00:0c: [io 0x00a4-0x00bd]
[ 0.306946] pnp 00:0c: [io 0x0140-0x014f]
[ 0.306949] pnp 00:0c: [mem 0xffb00000-0xffbfffff]
[ 0.306953] pnp 00:0c: [mem 0xfff00000-0xffffffff]
[ 0.306957] pnp 00:0c: [io 0x004c-0x004d]
[ 0.306960] pnp 00:0c: [io 0x004e-0x004f]
[ 0.306963] pnp 00:0c: [io 0x0200-0x020f]
[ 0.307050] system 00:0c: [io 0x0140-0x014f] has been reserved
[ 0.307055] system 00:0c: [io 0x0200-0x020f] has been reserved
[ 0.307060] system 00:0c: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.307065] system 00:0c: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.307070] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.307513] pnp 00:0d: [io 0x04d0-0x04d1]
[ 0.307517] pnp 00:0d: [io 0x1000-0x107f]
[ 0.307521] pnp 00:0d: [io 0x1100-0x113f]
[ 0.307524] pnp 00:0d: [io 0x1200-0x121f]
[ 0.307528] pnp 00:0d: [mem 0xfec00000-0xfec000ff]
[ 0.307606] system 00:0d: [io 0x04d0-0x04d1] has been reserved
[ 0.307610] system 00:0d: [io 0x1000-0x107f] has been reserved
[ 0.307615] system 00:0d: [io 0x1100-0x113f] has been reserved
[ 0.307619] system 00:0d: [io 0x1200-0x121f] has been reserved
[ 0.307624] system 00:0d: [mem 0xfec00000-0xfec000ff] has been reserved
[ 0.307629] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.307852] pnp 00:0e: [mem 0xfec01000-0xfec01fff]
[ 0.307929] system 00:0e: [mem 0xfec01000-0xfec01fff] has been reserved
[ 0.307934] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.307941] pnp: PnP ACPI: found 15 devices
[ 0.307944] ACPI: ACPI bus type pnp unregistered
[ 0.307950] PnPBIOS: Disabled by ACPI PNP
[ 0.345248] Switching to clocksource acpi_pm
[ 0.345271] PCI: max bus depth: 2 pci_try_num: 3
[ 0.345298] pci 0000:00:1f.1: BAR 5: assigned [mem 0x40000000-0x400003ff]
[ 0.345307] pci 0000:00:1f.1: BAR 5: set to [mem 0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
[ 0.345313] pci 0000:00:1e.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
[ 0.345319] pci 0000:01:00.0: BAR 6: assigned [mem 0x90420000-0x9043ffff pref]
[ 0.345324] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.345328] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.345334] pci 0000:00:01.0: bridge window [mem 0x90400000-0x904fffff]
[ 0.345339] pci 0000:00:01.0: bridge window [mem 0x98000000-0x9fffffff pref]
[ 0.345349] pci 0000:02:04.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
[ 0.345354] pci 0000:02:04.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
[ 0.345358] pci 0000:02:04.0: BAR 14: assigned [io 0x2800-0x28ff]
[ 0.345363] pci 0000:02:04.0: BAR 13: assigned [io 0x2c00-0x2cff]
[ 0.345367] pci 0000:02:04.0: CardBus bridge to [bus 03-06]
[ 0.345371] pci 0000:02:04.0: bridge window [io 0x2c00-0x2cff]
[ 0.345376] pci 0000:02:04.0: bridge window [io 0x2800-0x28ff]
[ 0.345382] pci 0000:02:04.0: bridge window [mem 0x44000000-0x47ffffff pref]
[ 0.345389] pci 0000:02:04.0: bridge window [mem 0x48000000-0x4bffffff]
[ 0.345394] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[ 0.345399] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.345406] pci 0000:00:1e.0: bridge window [mem 0x90000000-0x903fffff]
[ 0.345412] pci 0000:00:1e.0: bridge window [mem 0x44000000-0x47ffffff pref]
[ 0.345433] pci 0000:00:1e.0: setting latency timer to 64
[ 0.345636] ACPI: PCI Interrupt Link [C0C4] enabled at IRQ 5
[ 0.345640] PCI: setting IRQ 5 as level-triggered
[ 0.345647] pci 0000:02:04.0: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 0.345655] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.345659] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.345663] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.345667] pci_bus 0000:01: resource 1 [mem 0x90400000-0x904fffff]
[ 0.345671] pci_bus 0000:01: resource 2 [mem 0x98000000-0x9fffffff pref]
[ 0.345675] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.345679] pci_bus 0000:02: resource 1 [mem 0x90000000-0x903fffff]
[ 0.345683] pci_bus 0000:02: resource 2 [mem 0x44000000-0x47ffffff pref]
[ 0.345687] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.345691] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.345696] pci_bus 0000:03: resource 0 [io 0x2c00-0x2cff]
[ 0.345699] pci_bus 0000:03: resource 1 [io 0x2800-0x28ff]
[ 0.345703] pci_bus 0000:03: resource 2 [mem 0x44000000-0x47ffffff pref]
[ 0.345707] pci_bus 0000:03: resource 3 [mem 0x48000000-0x4bffffff]
[ 0.345779] NET: Registered protocol family 2
[ 0.345866] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.346244] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.348214] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.348768] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.348773] TCP reno registered
[ 0.348780] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.348802] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.349016] NET: Registered protocol family 1
[ 0.349143] pci 0000:01:00.0: Boot video device
[ 0.349161] PCI: CLS 32 bytes, default 64
[ 0.349267] Unpacking initramfs...
[ 0.811720] Freeing initrd memory: 9844k freed
[ 0.829745] audit: initializing netlink socket (disabled)
[ 0.829767] type=2000 audit(1327571148.825:1): initialized
[ 0.857508] highmem bounce pool size: 64 pages
[ 0.857517] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.857676] VFS: Disk quotas dquot_6.5.2
[ 0.857707] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.857790] msgmni has been set to 1747
[ 0.857997] alg: No test for stdrng (krng)
[ 0.858033] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.858038] io scheduler noop registered
[ 0.858041] io scheduler deadline registered
[ 0.858053] io scheduler cfq registered (default)
[ 0.858443] ERST: Table is not found!
[ 0.858446] GHES: HEST is not enabled!
[ 0.858467] isapnp: Scanning for PnP cards...
[ 1.212298] isapnp: No Plug & Play device found
[ 1.212381] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.232702] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.253102] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 1.273627] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.274133] ACPI: PCI Interrupt Link [C0C3] enabled at IRQ 10
[ 1.274138] PCI: setting IRQ 10 as level-triggered
[ 1.274146] serial 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 1.274175] serial 0000:00:1f.6: PCI INT B disabled
[ 1.274330] Linux agpgart interface v0.103
[ 1.274487] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 1.287643] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 1.287900] i8042: PNP: PS/2 Controller [PNP0303:C1A3,PNP0f13:C1A4] at 0x60,0x64 irq 1,12
[ 1.297373] i8042: Detected active multiplexing controller, rev 1.1
[ 1.302523] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.302534] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.302581] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.302622] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.302662] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.302829] mousedev: PS/2 mouse device common for all mice
[ 1.304804] rtc_cmos 00:09: RTC can wake from S4
[ 1.304928] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 1.304946] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 1.305016] EISA: Probing bus 0 at eisa.0
[ 1.305026] Cannot allocate resource for EISA slot 1
[ 1.305029] Cannot allocate resource for EISA slot 2
[ 1.305033] Cannot allocate resource for EISA slot 3
[ 1.305036] Cannot allocate resource for EISA slot 4
[ 1.305057] EISA: Detected 0 cards.
[ 1.305061] cpuidle: using governor ladder
[ 1.305064] cpuidle: using governor menu
[ 1.305398] TCP cubic registered
[ 1.305438] NET: Registered protocol family 10
[ 1.306129] Mobile IPv6
[ 1.306133] NET: Registered protocol family 17
[ 1.306140] Registering the dns_resolver key type
[ 1.306154] Using IPI Shortcut mode
[ 1.306277] PM: Hibernation image not present or could not be loaded.
[ 1.306292] registered taskstats version 1
[ 1.306620] rtc_cmos 00:09: setting system clock to 2012-01-26 09:45:50 UTC (1327571150)
[ 1.306671] Initializing network drop monitor service
[ 1.306807] Freeing unused kernel memory: 444k freed
[ 1.307090] Write protecting the kernel text: 2560k
[ 1.307118] Write protecting the kernel read-only data: 1044k
[ 1.323878] udevd[42]: starting version 175
[ 1.330130] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.422245] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.422312] 8139cp 0000:02:01.0: PCI INT A -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 1.423246] 8139cp 0000:02:01.0: eth0: RTL-8139C+ at 0xf800c000, 00:02:3f:65:ff:ef, IRQ 10
[ 1.423915] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.427639] usbcore: registered new interface driver usbfs
[ 1.427678] usbcore: registered new interface driver hub
[ 1.470346] ACPI: PCI Interrupt Link [C0C2] enabled at IRQ 10
[ 1.470357] firewire_ohci 0000:02:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 1.474800] usbcore: registered new device driver usb
[ 1.475778] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.481801] SCSI subsystem initialized
[ 1.489626] ACPI: PCI Interrupt Link [C0C9] enabled at IRQ 5
[ 1.489638] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[C0C9] -> GSI 5 (level, low) -> IRQ 5
[ 1.489673] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.489678] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.489721] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.489769] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.493652] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.532469] firewire_ohci: Added fw-ohci device 0000:02:00.0, OHCI v1.0, 4 IR + 8 IT contexts, quirks 0x11
[ 1.540882] ehci_hcd 0000:00:1d.7: irq 5, io mem 0xa0000000
[ 1.546715] wbsd: Winbond W83L51xD SD/MMC card interface driver
[ 1.546719] wbsd: Copyright(c) Pierre Ossman
[ 1.546756] wbsd 00:02: [io 0x0248-0x024f]
[ 1.546813] wbsd 00:02: [irq 6]
[ 1.546818] wbsd 00:02: [dma 0]
[ 1.547311] wbsd 00:02: activated
[ 1.556362] libata version 3.00 loaded.
[ 1.576180] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.576254] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.576259] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.576263] usb usb1: Product: EHCI Host Controller
[ 1.576266] usb usb1: Manufacturer: Linux 3.2.0-1-486 ehci_hcd
[ 1.576270] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.576458] hub 1-0:1.0: USB hub found
[ 1.576465] hub 1-0:1.0: 6 ports detected
[ 1.577343] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.577425] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 1.577439] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.577444] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.577460] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.577491] uhci_hcd 0000:00:1d.0: irq 10, io base 0x000048c0
[ 1.577536] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.577540] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.577544] usb usb2: Product: UHCI Host Controller
[ 1.577547] usb usb2: Manufacturer: Linux 3.2.0-1-486 uhci_hcd
[ 1.577551] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.577727] hub 2-0:1.0: USB hub found
[ 1.577734] hub 2-0:1.0: 2 ports detected
[ 1.577822] ata_piix 0000:00:1f.1: version 2.13
[ 1.577835] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.577843] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 1.577898] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.582588] scsi0 : ata_piix
[ 1.583286] mmc0: W83L51xD id 7112 at 0x248 irq 6 dma 0 PnP
[ 1.586388] scsi1 : ata_piix
[ 1.587180] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c40 irq 14
[ 1.587185] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4c48 irq 15
[ 1.587428] ACPI: PCI Interrupt Link [C0C5] enabled at IRQ 5
[ 1.587435] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 1.587449] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.587454] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.587472] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.587501] uhci_hcd 0000:00:1d.1: irq 5, io base 0x000048e0
[ 1.587558] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.587562] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.587566] usb usb3: Product: UHCI Host Controller
[ 1.587570] usb usb3: Manufacturer: Linux 3.2.0-1-486 uhci_hcd
[ 1.587573] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.587749] hub 3-0:1.0: USB hub found
[ 1.587756] hub 3-0:1.0: 2 ports detected
[ 1.587854] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0C4] -> GSI 5 (level, low) -> IRQ 5
[ 1.587863] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.587867] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.587878] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.587902] uhci_hcd 0000:00:1d.2: irq 5, io base 0x00004c00
[ 1.587943] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.587948] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.587951] usb usb4: Product: UHCI Host Controller
[ 1.587955] usb usb4: Manufacturer: Linux 3.2.0-1-486 uhci_hcd
[ 1.587958] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.588142] hub 4-0:1.0: USB hub found
[ 1.588148] hub 4-0:1.0: 2 ports detected
[ 1.760304] ata2.00: ATAPI: DW-224E, A.0H, max MWDMA2
[ 1.776211] ata2.00: configured for MWDMA2
[ 1.812607] ata1.00: ATA-8: WDC WD2500BEVE-00WZT0, 01.01A01, max UDMA/100
[ 1.812612] ata1.00: 488397168 sectors, multi 16: LBA48
[ 1.828873] ata1.00: configured for UDMA/100
[ 1.829029] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVE-0 01.0 PQ: 0 ANSI: 5
[ 1.830436] scsi 1:0:0:0: CD-ROM TEAC DW-224E A.0H PQ: 0 ANSI: 5
[ 1.844693] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.844759] sd 0:0:0:0: [sda] Write Protect is off
[ 1.844764] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.844792] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.846915] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.846920] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.847360] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.848037] Refined TSC clocksource calibration: 1495.148 MHz.
[ 1.848045] Switching to clocksource tsc
[ 1.874437] sda: sda1 sda2 sda3 < sda5 >
[ 1.875042] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.944050] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[ 2.032174] firewire_core: created device fw0: GUID 00023f3938005b81, S400
[ 2.077853] usb 1-5: New USB device found, idVendor=125f, idProduct=d17a
[ 2.077858] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.077862] usb 1-5: Product: A-DATA USB Flash Drive
[ 2.077865] usb 1-5: Manufacturer: A-DATA
[ 2.077868] usb 1-5: SerialNumber: 2e72bbd37ed019
[ 2.081657] usbcore: registered new interface driver uas
[ 2.083493] Initializing USB Mass Storage driver...
[ 2.083614] scsi2 : usb-storage 1-5:1.0
[ 2.083812] usbcore: registered new interface driver usb-storage
[ 2.083815] USB Mass Storage support registered.
[ 2.316038] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[ 2.501396] usb 2-1: New USB device found, idVendor=045e, idProduct=0040
[ 2.501402] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.501406] usb 2-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[ 2.501410] usb 2-1: Manufacturer: Microsoft
[ 2.504529] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.534140] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[ 2.534291] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1/input0
[ 2.534326] usbcore: registered new interface driver usbhid
[ 2.534329] usbhid: USB HID core driver
[ 3.085222] scsi 2:0:0:0: Direct-Access A-DATA USB Flash Drive 0.00 PQ: 0 ANSI: 2
[ 3.086445] sd 2:0:0:0: [sdb] 15794176 512-byte logical blocks: (8.08 GB/7.53 GiB)
[ 3.087065] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.087069] sd 2:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 3.087689] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 3.087735] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.090937] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 3.090980] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.253107] sdb:
[ 3.255536] sd 2:0:0:0: [sdb] Asking for cache data failed
[ 3.255581] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.255623] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 9.854880] udevd[246]: starting version 175
[ 10.229527] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 10.229538] ACPI: Power Button [C1BE]
[ 10.229646] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 10.229747] ACPI: Lid Switch [C136]
[ 10.229842] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 10.229847] ACPI: Power Button [PWRF]
[ 10.234765] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.237005] Marking TSC unstable due to TSC halts in idle
[ 10.237022] ACPI: acpi_idle registered with cpuidle
[ 10.243594] Switching to clocksource acpi_pm
[ 10.244409] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.309941] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input5
[ 10.309953] ACPI: Video Device [C0D0] (multi-head: yes rom: no post: no)
[ 10.380900] i801_smbus 0000:00:1f.3: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 10.522449] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 10.764390] ACPI: Battery Slot [C11F] (battery present)
[ 10.764830] ACPI: AC Adapter [C134] (on-line)
[ 10.834656] parport_pc 00:05: reported by Plug and Play ACPI
[ 10.834707] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 10.856082] intel_rng: FWH not detected
[ 10.908333] yenta_cardbus 0000:02:04.0: CardBus bridge found [0e11:0860]
[ 10.908352] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 10.908356] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 10.908362] yenta_cardbus 0000:02:04.0: TI: mfunc 0x001c1112, devctl 0x44
[ 11.012719] iTCO_vendor_support: vendor-support=0
[ 11.062017] cfg80211: Calling CRDA to update world regulatory domain
[ 11.067036] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 11.067852] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 11.068423] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.080822] [drm] Initialized drm 1.1.0 20060810
[ 11.081028] NET: Registered protocol family 23
[ 11.107555] lib80211: common routines for IEEE802.11 drivers
[ 11.107559] lib80211_crypt: registered algorithm 'NULL'
[ 11.140362] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0818, PCI irq 5
[ 11.140367] yenta_cardbus 0000:02:04.0: Socket status: 30000006
[ 11.140373] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 11.140387] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 11.140392] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x247f 0x2800-0x28ff 0x2c00-0x2cff
[ 11.146236] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x90000000-0x903fffff]
[ 11.146241] pcmcia_socket pcmcia_socket0: cs: memory probe 0x90000000-0x903fffff: excluding 0x90000000-0x9003ffff 0x90100000-0x9013ffff 0x90200000-0x9023ffff 0x90300000-0x9033ffff
[ 11.146264] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x44000000-0x47ffffff pref]
[ 11.146268] pcmcia_socket pcmcia_socket0: cs: memory probe 0x44000000-0x47ffffff: excluding 0x44000000-0x47ffffff
[ 11.212304] Detected unconfigured Compaq x1000 family SMSC IrDA chip, pre-configuring device.
[ 11.212309] Setting up Intel 82801 controller and SMSC device
[ 11.212442] found SMC SuperIO Chip (devid=0x5a rev=00 base=0x002e): LPC47N227
[ 11.212458] smsc_superio_flat(): fir: 0x2f8, sir: 0x2e8, dma: 03, irq: 7, mode: 0x0e
[ 11.212474] SMsC IrDA Controller found
[ 11.212476] IrCC version 2.0, firport 0x2f8, sirport 0x2e8 dma=3, irq=7
[ 11.212549] No transceiver found. Defaulting to Fast pin select
[ 11.213349] IrDA: Registered device irda0
[ 11.216382] libipw: 802.11 data/management/control stack, git-1.1.13
[ 11.216387] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 11.240630] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[ 11.240635] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[ 11.240799] ipw2100 0000:02:02.0: PCI INT A -> Link[C0C5] -> GSI 5 (level, low) -> IRQ 5
[ 11.241672] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
[ 11.274799] [drm] radeon kernel modesetting enabled.
[ 11.274939] radeon 0000:01:00.0: PCI INT A -> Link[C0C2] -> GSI 10 (level, low) -> IRQ 10
[ 11.276001] [drm] initializing kernel modesetting (RV250 0x1002:0x4C66 0x0E11:0x0860).
[ 11.276065] [drm] register mmio base: 0x90400000
[ 11.276068] [drm] register mmio size: 65536
[ 11.277536] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 11.277554] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 11.277593] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 11.277620] radeon 0000:01:00.0: GTT: 256M 0xB0000000 - 0xBFFFFFFF
[ 11.277630] radeon 0000:01:00.0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (64M used)
[ 11.277640] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 11.277642] [drm] Driver supports precise vblank timestamp query.
[ 11.277656] [drm] radeon: irq initialized.
[ 11.277929] [drm] Detected VRAM RAM=128M, BAR=128M
[ 11.277934] [drm] RAM width 128bits DDR
[ 11.278032] [TTM] Zone kernel: Available graphics memory: 447706 kiB.
[ 11.278035] [TTM] Zone highmem: Available graphics memory: 517246 kiB.
[ 11.278038] [TTM] Initializing pool allocator.
[ 11.278078] [drm] radeon: 64M of VRAM memory ready
[ 11.278082] [drm] radeon: 256M of GTT memory ready.
[ 11.279084] radeon 0000:01:00.0: WB disabled
[ 11.279823] [drm] Loading R200 Microcode
[ 11.352981] psmouse serio4: synaptics: Touchpad model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008/0x0
[ 11.407523] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 11.432131] snd_intel8x0m 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 11.432156] snd_intel8x0m 0000:00:1f.6: setting latency timer to 64
[ 11.605492] [drm] radeon: ring at 0x00000000B0001000
[ 11.605515] [drm] ring test succeeded in 1 usecs
[ 11.605770] [drm] radeon: ib pool ready.
[ 11.605878] [drm] ib test succeeded in 0 usecs
[ 11.606147] [drm] Panel ID String: SEC
[ 11.606150] [drm] Panel Size 1680x1050
[ 11.617152] [drm] radeon legacy LVDS backlight initialized
[ 11.620496] [drm] Radeon Display Connectors
[ 11.620501] [drm] Connector 0:
[ 11.620503] [drm] VGA
[ 11.620507] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 11.620510] [drm] Encoders:
[ 11.620512] [drm] CRT1: INTERNAL_DAC1
[ 11.620515] [drm] Connector 1:
[ 11.620517] [drm] LVDS
[ 11.620521] [drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[ 11.620523] [drm] Encoders:
[ 11.620525] [drm] LCD1: INTERNAL_LVDS
[ 11.620528] [drm] Connector 2:
[ 11.620530] [drm] S-video
[ 11.620532] [drm] Encoders:
[ 11.620534] [drm] TV1: INTERNAL_DAC2
[ 11.640705] eth1: Radio is disabled by RF switch.
[ 11.641801] snd_intel8x0 0000:00:1f.5: PCI INT B -> Link[C0C3] -> GSI 10 (level, low) -> IRQ 10
[ 11.641837] snd_intel8x0 0000:00:1f.5: setting latency timer to 64
[ 11.712545] [drm] fb mappable at 0x98040000
[ 11.712549] [drm] vram apper at 0x98000000
[ 11.712552] [drm] size 7057408
[ 11.712554] [drm] fb depth is 24
[ 11.712556] [drm] pitch is 6720
[ 11.712734] fbcon: radeondrmfb (fb0) is primary device
[ 11.791091] Console: switching to colour frame buffer device 210x65
[ 11.844025] fb0: radeondrmfb frame buffer device
[ 11.844029] drm: registered panic notifier
[ 11.846014] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 11.940848] cfg80211: failed to add phy80211 symlink to netdev!
[ 12.568049] intel8x0_measure_ac97_clock: measured 55335 usecs (2666 samples)
[ 12.568054] intel8x0: clocking to 48000
[ 13.047579] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 13.289819] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 13.405215] loop: module loaded
[ 13.808122] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 14.162879] fuse init (API version 7.17)
[ 15.057323] Bluetooth: Core ver 2.16
[ 15.057364] NET: Registered protocol family 31
[ 15.057367] Bluetooth: HCI device and connection manager initialized
[ 15.057372] Bluetooth: HCI socket layer initialized
[ 15.057375] Bluetooth: L2CAP socket layer initialized
[ 15.057688] Bluetooth: SCO socket layer initialized
[ 15.065454] Bluetooth: RFCOMM TTY layer initialized
[ 15.065460] Bluetooth: RFCOMM socket layer initialized
[ 15.065463] Bluetooth: RFCOMM ver 1.11
[ 15.168396] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.168401] Bluetooth: BNEP filters: protocol multicast
[ 15.276780] 8139cp 0000:02:01.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 25.776050] eth0: no IPv6 routers present
[ 31.527612] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro,commit=0
[ 31.681026] EXT4-fs (sda5): re-mounted. Opts: commit=0
Reply to: