Bug#641749: [acimmarusti@gmail.com: Re: ath3k_load_firmware: Can't change to loading configuration err]
> I'll try to install the sid packages (There are also some packages
> being prepared for backports), but I don't think the .config file is
> the problem because I have always borrowed it from the linux-image
> debian packages and then done some very minor edits.
I tested two kernels on Squeeze:
- 3.1.8 from squeeze-backports, which was compiled using gcc 4.4.5 (as
my own compiled 3.0.x and 3.1.x kernels)
- 3.1.8 from wheezy, compiled using gcc 4.6.2
Both kernels loaded the firmware correctly without any problems. The
backport comes from the version in testing, so they have the same
.config file. I've attached both dmesg.
Using wheezy, This same kernel fails to load the firmware everytime,
as compiled with gcc 4.6.2
Once again, not a clue why there's a failure... I will give kernel
3.2.x a try once it migrates to wheezy.
Cheers,
Andres
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-0.bpo.1-amd64 (Debian 3.1.8-2~bpo60+1) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Mon Jan 23 08:42:50 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-0.bpo.1-amd64 root=UUID=d7e3e4b3-1ec1-4ab7-a2fd-c9b8cffc8fd3 ro quiet pcie_aspm=force i915.i915_enable_rc6=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b3594000 (usable)
[ 0.000000] BIOS-e820: 00000000b3594000 - 00000000b3596000 (reserved)
[ 0.000000] BIOS-e820: 00000000b3596000 - 00000000b35de000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b35de000 - 00000000b35e8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b35e8000 - 00000000b35eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b35eb000 - 00000000b361a000 (reserved)
[ 0.000000] BIOS-e820: 00000000b361a000 - 00000000b361c000 (usable)
[ 0.000000] BIOS-e820: 00000000b361c000 - 00000000b3626000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b3626000 - 00000000b3647000 (reserved)
[ 0.000000] BIOS-e820: 00000000b3647000 - 00000000b368a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b368a000 - 00000000b3800000 (usable)
[ 0.000000] BIOS-e820: 00000000b7e00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M., BIOS Spring Peak 01/25/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0B4000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 138000000 mask FF8000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b4000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb3800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcd20] fcd20
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b3800000
[ 0.000000] 0000000000 - 00b3800000 page 2M
[ 0.000000] kernel direct mapping tables up to b3800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ b37fa000-b3800000
[ 0.000000] RAMDISK: 37608000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 ALASKA)
[ 0.000000] ACPI: XSDT 00000000b35de080 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000b35e6e90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xB361DF40/0x00000000B361DF80, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000b35de168 08D23 (v02 ALASKA A M I 00000018 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000b361df40 00040
[ 0.000000] ACPI: APIC 00000000b35e6f88 00072 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000b35e7000 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000b35e7108 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000b35e7148 00038 (v01 ALASKA A M I 01072009 AMI. 00000003)
[ 0.000000] ACPI: ASF! 00000000b35e7180 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133a00000-ffff8801371fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000b3594
[ 0.000000] 0: 0x000b361a -> 0x000b361c
[ 0.000000] 0: 0x000b368a -> 0x000b3800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 964246
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 716612 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b3594000 - 00000000b3596000
[ 0.000000] PM: Registered nosave memory: 00000000b3596000 - 00000000b35de000
[ 0.000000] PM: Registered nosave memory: 00000000b35de000 - 00000000b35e8000
[ 0.000000] PM: Registered nosave memory: 00000000b35e8000 - 00000000b35eb000
[ 0.000000] PM: Registered nosave memory: 00000000b35eb000 - 00000000b361a000
[ 0.000000] PM: Registered nosave memory: 00000000b361c000 - 00000000b3626000
[ 0.000000] PM: Registered nosave memory: 00000000b3626000 - 00000000b3647000
[ 0.000000] PM: Registered nosave memory: 00000000b3647000 - 00000000b368a000
[ 0.000000] PM: Registered nosave memory: 00000000b3800000 - 00000000b7e00000
[ 0.000000] PM: Registered nosave memory: 00000000b7e00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s80832 r8192 d21568 u524288
[ 0.000000] pcpu-alloc: s80832 r8192 d21568 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 946769
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-0.bpo.1-amd64 root=UUID=d7e3e4b3-1ec1-4ab7-a2fd-c9b8cffc8fd3 ro quiet pcie_aspm=force i915.i915_enable_rc6=1
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3714472k/5111808k available (3403k kernel code, 1254824k absent, 142512k reserved, 3318k data, 596k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1330.175 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.35 BogoMIPS (lpj=5320700)
[ 0.000011] pid_max: default: 32768 minimum: 301
[ 0.000078] Security Framework initialized
[ 0.000591] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002397] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003271] Mount-cache hash table entries: 256
[ 0.003445] Initializing cgroup subsys cpuacct
[ 0.003452] Initializing cgroup subsys memory
[ 0.003469] Initializing cgroup subsys devices
[ 0.003474] Initializing cgroup subsys freezer
[ 0.003477] Initializing cgroup subsys net_cls
[ 0.003481] Initializing cgroup subsys blkio
[ 0.003528] CPU: Physical Processor ID: 0
[ 0.003530] CPU: Processor Core ID: 0
[ 0.003539] mce: CPU supports 9 MCE banks
[ 0.003556] CPU0: Thermal monitoring enabled (TM1)
[ 0.003567] using mwait in idle threads.
[ 0.005142] ACPI: Core revision 20110623
[ 0.013814] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053460] CPU0: Intel(R) Core(TM) i3 CPU U 380 @ 1.33GHz stepping 05
[ 0.159044] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.159055] ... version: 3
[ 0.159057] ... bit width: 48
[ 0.159059] ... generic registers: 4
[ 0.159061] ... value mask: 0000ffffffffffff
[ 0.159064] ... max period: 000000007fffffff
[ 0.159066] ... fixed-purpose events: 3
[ 0.159069] ... event mask: 000000070000000f
[ 0.159317] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.159486] Booting Node 0, Processors #1
[ 0.159490] smpboot cpu 1: start_ip = 95000
[ 0.267095] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.267274] #2
[ 0.267276] smpboot cpu 2: start_ip = 95000
[ 0.374982] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.375176] #3 Ok.
[ 0.375179] smpboot cpu 3: start_ip = 95000
[ 0.482860] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.482915] Brought up 4 CPUs
[ 0.482919] Total of 4 processors activated (10641.17 BogoMIPS).
[ 0.485592] devtmpfs: initialized
[ 0.491674] PM: Registering ACPI NVS region at b3596000 (294912 bytes)
[ 0.491702] PM: Registering ACPI NVS region at b35e8000 (12288 bytes)
[ 0.491706] PM: Registering ACPI NVS region at b361c000 (40960 bytes)
[ 0.491712] PM: Registering ACPI NVS region at b3647000 (274432 bytes)
[ 0.491956] print_constraints: dummy:
[ 0.492052] NET: Registered protocol family 16
[ 0.492202] ACPI: bus type pci registered
[ 0.492302] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.492307] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.552111] PCI: Using configuration type 1 for base access
[ 0.552992] bio: create slab <bio-0> at 0
[ 0.553148] ACPI: Added _OSI(Module Device)
[ 0.553152] ACPI: Added _OSI(Processor Device)
[ 0.553156] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.553160] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.555063] ACPI: EC: Look up EC in DSDT
[ 0.556905] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.564321] ACPI: SSDT 00000000b361cc18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.564912] ACPI: Dynamic OEM Table Load:
[ 0.564916] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.564967] ACPI Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20110623/tbutils-314)
[ 0.564975] ACPI: SSDT 00000000b361de18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.565426] ACPI: Dynamic OEM Table Load:
[ 0.565429] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.568390] ACPI: Interpreter enabled
[ 0.568398] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.568475] ACPI: Using IOAPIC for interrupt routing
[ 0.568945] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.672250] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.672549] ACPI: No dock devices found.
[ 0.672552] HEST: Table not found.
[ 0.672556] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.672826] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.673029] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.673033] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.673037] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.673041] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 0.673060] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.673089] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.673121] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.673138] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.673149] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.673157] pci 0000:00:02.0: reg 20: [io 0xf080-0xf087]
[ 0.673242] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.673278] pci 0000:00:16.0: reg 10: [mem 0xfe509000-0xfe50900f 64bit]
[ 0.673378] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.673386] pci 0000:00:16.0: PME# disabled
[ 0.673438] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.673470] pci 0000:00:1a.0: reg 10: [mem 0xfe508000-0xfe5083ff]
[ 0.673577] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.673584] pci 0000:00:1a.0: PME# disabled
[ 0.673624] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.673651] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit]
[ 0.673749] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.673754] pci 0000:00:1b.0: PME# disabled
[ 0.673791] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.673888] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.673895] pci 0000:00:1c.0: PME# disabled
[ 0.673940] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.674037] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.674044] pci 0000:00:1c.4: PME# disabled
[ 0.674094] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.674125] pci 0000:00:1d.0: reg 10: [mem 0xfe507000-0xfe5073ff]
[ 0.674233] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.674240] pci 0000:00:1d.0: PME# disabled
[ 0.674271] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.674368] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 0.674516] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 0.674550] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
[ 0.674565] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
[ 0.674580] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
[ 0.674594] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
[ 0.674608] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 0.674633] pci 0000:00:1f.2: reg 24: [mem 0xfe506000-0xfe5067ff]
[ 0.674694] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.674700] pci 0000:00:1f.2: PME# disabled
[ 0.674732] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.674758] pci 0000:00:1f.3: reg 10: [mem 0xfe505000-0xfe5050ff 64bit]
[ 0.674795] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.674857] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.674891] pci 0000:00:1f.6: reg 10: [mem 0xfe504000-0xfe504fff 64bit]
[ 0.675107] pci 0000:01:00.0: [8086:422c] type 0 class 0x000280
[ 0.675154] pci 0000:01:00.0: reg 10: [mem 0xfe400000-0xfe401fff 64bit]
[ 0.675336] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.675347] pci 0000:01:00.0: PME# disabled
[ 0.682664] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.682682] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.682844] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.682914] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.683038] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.683115] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.683336] pci 0000:02:00.0: supports D1 D2
[ 0.683339] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.683356] pci 0000:02:00.0: PME# disabled
[ 0.683541] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.683548] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.683561] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.683654] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.683671] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.683676] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.683680] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.683685] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.683713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.684122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.684336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.684411] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.684668] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.684974] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.694454] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.694539] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.694634] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.694716] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.694798] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.694881] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.694963] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.695045] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.695213] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.695225] vgaarb: loaded
[ 0.695227] vgaarb: bridge control possible 0000:00:02.0
[ 0.695286] PCI: Using ACPI for IRQ routing
[ 0.706806] PCI: Discovered peer bus ff
[ 0.706860] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.706892] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.706925] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.706954] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.706985] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.707014] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.707280] PCI: pci_cache_line_size set to 64 bytes
[ 0.707396] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.707400] reserve RAM buffer: 00000000b3594000 - 00000000b3ffffff
[ 0.707408] reserve RAM buffer: 00000000b361c000 - 00000000b3ffffff
[ 0.707413] reserve RAM buffer: 00000000b3800000 - 00000000b3ffffff
[ 0.707579] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.707588] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.709615] Switching to clocksource hpet
[ 0.710447] Switched to NOHz mode on CPU #0
[ 0.710594] Switched to NOHz mode on CPU #1
[ 0.710602] Switched to NOHz mode on CPU #3
[ 0.710607] Switched to NOHz mode on CPU #2
[ 0.712393] pnp: PnP ACPI init
[ 0.712415] ACPI: bus type pnp registered
[ 0.712523] pnp 00:00: [bus 00-ff]
[ 0.712527] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.712531] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.712535] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.712539] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.712542] pnp 00:00: [mem 0x00000000 window]
[ 0.712546] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 0.712629] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.712721] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.712725] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.712730] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.712734] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.712737] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.712802] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.712807] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.712812] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.712817] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.712822] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.712827] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.713004] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.713008] pnp 00:02: [io 0x0a00-0x0a1f]
[ 0.713011] pnp 00:02: [io 0x0a20-0x0a3f]
[ 0.713073] system 00:02: [io 0x0a00-0x0a1f] has been reserved
[ 0.713078] system 00:02: [io 0x0a20-0x0a3f] has been reserved
[ 0.713082] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.713127] pnp 00:03: [io 0x0060]
[ 0.713130] pnp 00:03: [io 0x0064]
[ 0.713146] pnp 00:03: [irq 1]
[ 0.713194] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.713264] pnp 00:04: [irq 12]
[ 0.713312] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.713333] pnp 00:05: [dma 4]
[ 0.713336] pnp 00:05: [io 0x0000-0x000f]
[ 0.713340] pnp 00:05: [io 0x0081-0x0083]
[ 0.713343] pnp 00:05: [io 0x0087]
[ 0.713346] pnp 00:05: [io 0x0089-0x008b]
[ 0.713349] pnp 00:05: [io 0x008f]
[ 0.713352] pnp 00:05: [io 0x00c0-0x00df]
[ 0.713389] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.713406] pnp 00:06: [io 0x0070-0x0071]
[ 0.713415] pnp 00:06: [irq 8]
[ 0.713451] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.713466] pnp 00:07: [io 0x0061]
[ 0.713504] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.713534] pnp 00:08: [io 0x0010-0x001f]
[ 0.713537] pnp 00:08: [io 0x0022-0x003f]
[ 0.713541] pnp 00:08: [io 0x0044-0x005f]
[ 0.713544] pnp 00:08: [io 0x0072-0x007f]
[ 0.713547] pnp 00:08: [io 0x0080]
[ 0.713550] pnp 00:08: [io 0x0084-0x0086]
[ 0.713553] pnp 00:08: [io 0x0088]
[ 0.713556] pnp 00:08: [io 0x008c-0x008e]
[ 0.713559] pnp 00:08: [io 0x0090-0x009f]
[ 0.713562] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.713567] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.713570] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.713656] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.713661] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.713678] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.713686] pnp 00:09: [irq 13]
[ 0.713726] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.714999] pnp 00:0a: [io 0x0400-0x047f]
[ 0.715004] pnp 00:0a: [io 0x1180-0x119f]
[ 0.715007] pnp 00:0a: [io 0x0500-0x057f]
[ 0.715010] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.715014] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.715017] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.715021] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.715101] system 00:0a: [io 0x0400-0x047f] has been reserved
[ 0.715106] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 0.715111] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.715117] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.715122] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.715127] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.715131] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.715136] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.715334] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.715393] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.754694] pnp: PnP ACPI: found 12 devices
[ 0.754697] ACPI: ACPI bus type pnp unregistered
[ 0.763759] PCI: max bus depth: 1 pci_try_num: 2
[ 0.763801] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.763810] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.763824] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.763829] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.763841] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.763852] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.763893] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.763901] pci 0000:00:1c.0: setting latency timer to 64
[ 0.763911] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.763918] pci 0000:00:1c.4: setting latency timer to 64
[ 0.763929] pci 0000:00:1e.0: setting latency timer to 64
[ 0.763936] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.763939] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.763943] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.763947] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.763950] pci_bus 0000:01: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.763954] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.763958] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.763962] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.763965] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.763969] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.763972] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.763976] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
[ 0.763980] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.764089] NET: Registered protocol family 2
[ 0.764324] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.765929] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.769102] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.769496] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.769499] TCP reno registered
[ 0.769513] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.769585] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.769785] NET: Registered protocol family 1
[ 0.769811] pci 0000:00:02.0: Boot video device
[ 1.025357] PCI: CLS 64 bytes, default 64
[ 1.025428] Unpacking initramfs...
[ 1.424062] Freeing initrd memory: 10144k freed
[ 1.427314] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.427322] Placing 64MB software IO TLB between ffff8800af594000 - ffff8800b3594000
[ 1.427326] software IO TLB at phys 0xaf594000 - 0xb3594000
[ 1.428211] audit: initializing netlink socket (disabled)
[ 1.428235] type=2000 audit(1327380564.268:1): initialized
[ 1.460509] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.481388] VFS: Disk quotas dquot_6.5.2
[ 1.481441] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.481567] msgmni has been set to 7274
[ 1.481842] alg: No test for stdrng (krng)
[ 1.481902] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.481907] io scheduler noop registered
[ 1.481909] io scheduler deadline registered
[ 1.481941] io scheduler cfq registered (default)
[ 1.482099] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.482175] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.482293] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.482355] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 1.482507] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.482511] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.482519] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.482549] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.482553] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.482561] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 1.482692] intel_idle: MWAIT substates: 0x1120
[ 1.482694] intel_idle: v0.4 model 0x25
[ 1.482697] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.482795] ERST: Table is not found!
[ 1.482798] GHES: HEST is not enabled!
[ 1.482924] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.597295] Linux agpgart interface v0.103
[ 1.597413] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.597590] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.598706] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.598946] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.599141] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.607397] i8042: Detected active multiplexing controller, rev 1.1
[ 1.611046] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.611058] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.611116] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.611149] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.611183] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.611376] mousedev: PS/2 mouse device common for all mice
[ 1.611446] rtc_cmos 00:06: RTC can wake from S4
[ 1.611597] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.611634] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.611832] cpuidle: using governor ladder
[ 1.612109] cpuidle: using governor menu
[ 1.612438] TCP cubic registered
[ 1.612602] NET: Registered protocol family 10
[ 1.613598] Mobile IPv6
[ 1.613602] NET: Registered protocol family 17
[ 1.613609] Registering the dns_resolver key type
[ 1.614489] PM: Hibernation image not present or could not be loaded.
[ 1.614523] registered taskstats version 1
[ 1.625542] rtc_cmos 00:06: setting system clock to 2012-01-24 04:49:24 UTC (1327380564)
[ 1.625635] Initializing network drop monitor service
[ 1.627999] Freeing unused kernel memory: 596k freed
[ 1.628114] Write protecting the kernel read-only data: 6144k
[ 1.632477] Freeing unused kernel memory: 672k freed
[ 1.632804] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.637484] Freeing unused kernel memory: 728k freed
[ 1.659484] udev[57]: starting version 164
[ 1.709838] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.709906] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.709988] r8169 0000:02:00.0: setting latency timer to 64
[ 1.710208] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.711104] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc9000064c000, 1c:6f:65:90:94:af, XID 0c200000 IRQ 42
[ 1.717178] SCSI subsystem initialized
[ 1.725884] usbcore: registered new interface driver usbfs
[ 1.725928] usbcore: registered new interface driver hub
[ 1.726102] libata version 3.00 loaded.
[ 1.726293] usbcore: registered new device driver usb
[ 1.727051] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.727101] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.727137] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.727145] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.727193] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.727247] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.731288] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.731394] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe508000
[ 1.744558] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.744611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.744618] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.744624] usb usb1: Product: EHCI Host Controller
[ 1.744628] usb usb1: Manufacturer: Linux 3.1.0-0.bpo.1-amd64 ehci_hcd
[ 1.744632] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.744847] hub 1-0:1.0: USB hub found
[ 1.744855] hub 1-0:1.0: 2 ports detected
[ 1.744982] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.745057] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.745063] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.745078] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.745119] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.749146] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.749170] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe507000
[ 1.764601] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.764629] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.764634] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.764638] usb usb2: Product: EHCI Host Controller
[ 1.764641] usb usb2: Manufacturer: Linux 3.1.0-0.bpo.1-amd64 ehci_hcd
[ 1.764644] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.764851] hub 2-0:1.0: USB hub found
[ 1.764858] hub 2-0:1.0: 2 ports detected
[ 1.764953] ahci 0000:00:1f.2: version 3.0
[ 1.764981] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.765054] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.765158] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[ 1.765165] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 1.765175] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.773372] scsi0 : ahci
[ 1.773618] scsi1 : ahci
[ 1.773783] scsi2 : ahci
[ 1.773983] scsi3 : ahci
[ 1.774135] scsi4 : ahci
[ 1.774419] ata1: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506100 irq 43
[ 1.774423] ata2: DUMMY
[ 1.774425] ata3: DUMMY
[ 1.774427] ata4: DUMMY
[ 1.774431] ata5: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506300 irq 43
[ 2.056249] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.092215] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.092252] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.092671] ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10302, max UDMA/133
[ 2.092677] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.093227] ata1.00: configured for UDMA/133
[ 2.093559] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5
[ 2.098998] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.099073] sd 0:0:0:0: [sda] Write Protect is off
[ 2.099077] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.099102] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.099930] sda: sda1 sda2 < sda5 >
[ 2.100569] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.192495] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.192501] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.192859] hub 1-1:1.0: USB hub found
[ 2.192922] hub 1-1:1.0: 6 ports detected
[ 2.242229] PM: Starting manual resume from disk
[ 2.242234] PM: Hibernation image partition 8:5 present
[ 2.242237] PM: Looking for hibernation image.
[ 2.242592] PM: Image not found (code -22)
[ 2.242600] PM: Hibernation image not present or could not be loaded.
[ 2.265293] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.303916] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.423785] Refined TSC clocksource calibration: 1330.155 MHz.
[ 2.423794] Switching to clocksource tsc
[ 2.436250] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.436256] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.436698] hub 2-1:1.0: USB hub found
[ 2.436817] hub 2-1:1.0: 8 ports detected
[ 2.515937] usb 1-1.3: new full speed USB device number 3 using ehci_hcd
[ 2.533742] udev[300]: starting version 164
[ 2.595821] ACPI: acpi_idle yielding to intel_idle
[ 2.600128] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.600140] ACPI: Power Button [PWRB]
[ 2.600281] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.601228] ACPI: Lid Switch [LID0]
[ 2.601472] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.601482] ACPI: Power Button [PWRF]
[ 2.608232] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3000
[ 2.608239] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.613006] [drm] Initialized drm 1.1.0 20060810
[ 2.617622] wmi: Mapper loaded
[ 2.628554] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.628564] i915 0000:00:02.0: setting latency timer to 64
[ 2.668065] ACPI: Battery Slot [BAT1] (battery present)
[ 2.673554] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.707621] usb 2-1.4: new low speed USB device number 3 using ehci_hcd
[ 2.731604] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.731688] ACPI: AC Adapter [AC] (on-line)
[ 2.732026] cfg80211: Calling CRDA to update world regulatory domain
[ 2.734925] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 2.734932] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.737300] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 2.737310] asus_wmi: Asus Management GUID not found
[ 2.737314] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.737317] [drm] Driver supports precise vblank timestamp query.
[ 2.737386] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.750851] Bluetooth: Core ver 2.16
[ 2.750884] NET: Registered protocol family 31
[ 2.750888] Bluetooth: HCI device and connection manager initialized
[ 2.750892] Bluetooth: HCI socket layer initialized
[ 2.750896] Bluetooth: L2CAP socket layer initialized
[ 2.750908] Bluetooth: SCO socket layer initialized
[ 2.754154] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 2.754735] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.754739] Copyright(c) 2003-2011 Intel Corporation
[ 2.754812] iwlagn 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.754829] iwlagn 0000:01:00.0: setting latency timer to 64
[ 2.754872] iwlagn 0000:01:00.0: pci_resource_len = 0x00002000
[ 2.754877] iwlagn 0000:01:00.0: pci_resource_base = ffffc90000660000
[ 2.754882] iwlagn 0000:01:00.0: HW Revision ID = 0x3E
[ 2.755015] iwlagn 0000:01:00.0: irq 45 for MSI/MSI-X
[ 2.755072] iwlagn 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 2.755159] iwlagn 0000:01:00.0: L1 Disabled; Enabling L0S
[ 2.775240] iwlagn 0000:01:00.0: device EEPROM VER=0x43a, CALIB=0x6
[ 2.775248] iwlagn 0000:01:00.0: Device SKU: 0X1f0
[ 2.775859] iwlagn 0000:01:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 2.787843] iwlagn 0000:01:00.0: loaded firmware version 9.221.4.1 build 25532
[ 2.788433] Registered led device: phy0-led
[ 2.794564] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.802888] usb 2-1.4: New USB device found, idVendor=0461, idProduct=4d0f
[ 2.802895] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.802900] usb 2-1.4: Product: USB Optical Mouse
[ 2.821252] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5
[ 2.821484] generic-usb 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.4/input0
[ 2.821517] usbcore: registered new interface driver usbhid
[ 2.821521] usbhid: USB HID core driver
[ 2.824184] udev[320]: renamed network interface wlan0 to wlan1
[ 2.875501] usb 2-1.5: new high speed USB device number 4 using ehci_hcd
[ 3.258974] usbcore: registered new interface driver ath3k
[ 3.367962] fbcon: inteldrmfb (fb0) is primary device
[ 3.540869] Console: switching to colour frame buffer device 170x48
[ 3.542378] usb 2-1.5: New USB device found, idVendor=174f, idProduct=1420
[ 3.542382] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.542386] usb 2-1.5: Product: USB Camera Device
[ 3.542389] usb 2-1.5: Manufacturer: Syntek
[ 3.542392] usb 2-1.5: SerialNumber: STK00001
[ 3.546529] fb0: inteldrmfb frame buffer device
[ 3.546532] drm: registered panic notifier
[ 3.573743] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0
[ 3.578447] usb 1-1.3: USB disconnect, device number 3
[ 3.585234] Linux media interface: v0.10
[ 3.589105] Linux video capture interface: v2.00
[ 3.591885] uvcvideo: Found UVC 1.00 device USB Camera Device (174f:1420)
[ 3.593107] acpi device:3e: registered as cooling_device4
[ 3.593589] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 3.594101] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.594252] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.594305] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 11, expected 14)
[ 3.594344] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.594407] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 3.594672] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 3.594938] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.595244] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.595336] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 3.595384] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.620361] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 3.626972] input: USB Camera Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8
[ 3.627094] usbcore: registered new interface driver uvcvideo
[ 3.627099] USB Video Class driver (1.1.1)
[ 3.652222] hda_codec: ALC269: SKU not ready 0x598301f0
[ 3.652869] hda_codec: ALC269VB: BIOS auto-probing.
[ 3.654928] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 3.659644] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0
[ 3.660268] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.660914] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 4.663424] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.663589] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.663724] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.663859] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.749464] usb 1-1.3: new full speed USB device number 4 using ehci_hcd
[ 4.842335] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3005
[ 4.842341] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.850045] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.862205] Intel AES-NI instructions are not detected.
[ 4.882607] padlock_aes: VIA PadLock not detected.
[ 4.899485] usbcore: registered new interface driver btusb
[ 4.909895] Adding 4789244k swap on /dev/sda5. Priority:-1 extents:1 across:4789244k SS
[ 4.915474] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 4.946918] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.970281] loop: module loaded
[ 5.178731] fuse init (API version 7.17)
[ 5.421832] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 5.426488] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 5.429514] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 5.432649] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[ 5.436122] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.548506] Bluetooth: RFCOMM TTY layer initialized
[ 5.548515] Bluetooth: RFCOMM socket layer initialized
[ 5.548520] Bluetooth: RFCOMM ver 1.11
[ 5.557127] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.557132] Bluetooth: BNEP filters: protocol multicast
[ 5.564412] Bridge firewalling registered
[ 5.586046] lp: driver loaded but no devices found
[ 5.592219] ppdev: user-space parallel port driver
[ 5.652631] iwlagn 0000:01:00.0: L1 Disabled; Enabling L0S
[ 5.659403] iwlagn 0000:01:00.0: Radio type=0x1-0x3-0x1
[ 5.895587] iwlagn 0000:01:00.0: L1 Disabled; Enabling L0S
[ 5.902375] iwlagn 0000:01:00.0: Radio type=0x1-0x3-0x1
[ 5.999290] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 6.151766] r8169 0000:02:00.0: eth0: link down
[ 6.152930] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.765818] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 22.057285] [drm] Changing LVDS panel from (-hsync, -vsync) to (-hsync, +vsync)
[ 27.271600] wlan1: authenticate with 00:14:6c:13:4c:de (try 1)
[ 27.274666] wlan1: authenticated
[ 27.275079] wlan1: associate with 00:14:6c:13:4c:de (try 1)
[ 27.277398] wlan1: RX AssocResp from 00:14:6c:13:4c:de (capab=0x411 status=0 aid=1)
[ 27.277408] wlan1: associated
[ 27.282318] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 37.545652] wlan1: no IPv6 routers present
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1-amd64 (Debian 3.1.8-2) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-11) ) #1 SMP Tue Jan 10 05:01:58 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=d7e3e4b3-1ec1-4ab7-a2fd-c9b8cffc8fd3 ro quiet pcie_aspm=force i915.i915_enable_rc6=1
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000b3594000 (usable)
[ 0.000000] BIOS-e820: 00000000b3594000 - 00000000b3596000 (reserved)
[ 0.000000] BIOS-e820: 00000000b3596000 - 00000000b35de000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b35de000 - 00000000b35e8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000b35e8000 - 00000000b35eb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b35eb000 - 00000000b361a000 (reserved)
[ 0.000000] BIOS-e820: 00000000b361a000 - 00000000b361c000 (usable)
[ 0.000000] BIOS-e820: 00000000b361c000 - 00000000b3626000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b3626000 - 00000000b3647000 (reserved)
[ 0.000000] BIOS-e820: 00000000b3647000 - 00000000b368a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000b368a000 - 00000000b3800000 (usable)
[ 0.000000] BIOS-e820: 00000000b7e00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./To be filled by O.E.M., BIOS Spring Peak 01/25/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0B4000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 138000000 mask FF8000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000b4000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xb3800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcd20] fcd20
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000b3800000
[ 0.000000] 0000000000 - 00b3800000 page 2M
[ 0.000000] kernel direct mapping tables up to b3800000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000138000000
[ 0.000000] 0100000000 - 0138000000 page 2M
[ 0.000000] kernel direct mapping tables up to 138000000 @ b37fa000-b3800000
[ 0.000000] RAMDISK: 37613000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v03 ALASKA)
[ 0.000000] ACPI: XSDT 00000000b35de080 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000b35e6e90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xB361DF40/0x00000000B361DF80, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000b35de168 08D23 (v02 ALASKA A M I 00000018 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000b361df40 00040
[ 0.000000] ACPI: APIC 00000000b35e6f88 00072 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000b35e7000 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000b35e7108 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000b35e7148 00038 (v01 ALASKA A M I 01072009 AMI. 00000003)
[ 0.000000] ACPI: ASF! 00000000b35e7180 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000138000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000138000000
[ 0.000000] NODE_DATA [0000000137ffb000 - 0000000137ffffff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880133a00000-ffff8801371fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00138000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000b3594
[ 0.000000] 0: 0x000b361a -> 0x000b361c
[ 0.000000] 0: 0x000b368a -> 0x000b3800
[ 0.000000] 0: 0x00100000 -> 0x00138000
[ 0.000000] On node 0 totalpages: 964246
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3917 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 716612 pages, LIFO batch:31
[ 0.000000] Normal zone: 3136 pages used for memmap
[ 0.000000] Normal zone: 226240 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b3594000 - 00000000b3596000
[ 0.000000] PM: Registered nosave memory: 00000000b3596000 - 00000000b35de000
[ 0.000000] PM: Registered nosave memory: 00000000b35de000 - 00000000b35e8000
[ 0.000000] PM: Registered nosave memory: 00000000b35e8000 - 00000000b35eb000
[ 0.000000] PM: Registered nosave memory: 00000000b35eb000 - 00000000b361a000
[ 0.000000] PM: Registered nosave memory: 00000000b361c000 - 00000000b3626000
[ 0.000000] PM: Registered nosave memory: 00000000b3626000 - 00000000b3647000
[ 0.000000] PM: Registered nosave memory: 00000000b3647000 - 00000000b368a000
[ 0.000000] PM: Registered nosave memory: 00000000b3800000 - 00000000b7e00000
[ 0.000000] PM: Registered nosave memory: 00000000b7e00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880137c00000 s80768 r8192 d21632 u524288
[ 0.000000] pcpu-alloc: s80768 r8192 d21632 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 946769
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-amd64 root=UUID=d7e3e4b3-1ec1-4ab7-a2fd-c9b8cffc8fd3 ro quiet pcie_aspm=force i915.i915_enable_rc6=1
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3714560k/5111808k available (3293k kernel code, 1254824k absent, 142424k reserved, 3426k data, 556k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 1330.353 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.70 BogoMIPS (lpj=5321412)
[ 0.000011] pid_max: default: 32768 minimum: 301
[ 0.000080] Security Framework initialized
[ 0.000631] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002461] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003252] Mount-cache hash table entries: 256
[ 0.003526] Initializing cgroup subsys cpuacct
[ 0.003535] Initializing cgroup subsys memory
[ 0.003553] Initializing cgroup subsys devices
[ 0.003558] Initializing cgroup subsys freezer
[ 0.003561] Initializing cgroup subsys net_cls
[ 0.003565] Initializing cgroup subsys blkio
[ 0.003612] CPU: Physical Processor ID: 0
[ 0.003614] CPU: Processor Core ID: 0
[ 0.003623] mce: CPU supports 9 MCE banks
[ 0.003640] CPU0: Thermal monitoring enabled (TM1)
[ 0.003651] using mwait in idle threads.
[ 0.004307] ACPI: Core revision 20110623
[ 0.013284] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052935] CPU0: Intel(R) Core(TM) i3 CPU U 380 @ 1.33GHz stepping 05
[ 0.159260] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.159272] ... version: 3
[ 0.159274] ... bit width: 48
[ 0.159276] ... generic registers: 4
[ 0.159278] ... value mask: 0000ffffffffffff
[ 0.159281] ... max period: 000000007fffffff
[ 0.159283] ... fixed-purpose events: 3
[ 0.159286] ... event mask: 000000070000000f
[ 0.159550] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.159733] Booting Node 0, Processors #1
[ 0.159738] smpboot cpu 1: start_ip = 95000
[ 0.267275] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.267465] #2
[ 0.267467] smpboot cpu 2: start_ip = 95000
[ 0.375219] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.375423] #3 Ok.
[ 0.375426] smpboot cpu 3: start_ip = 95000
[ 0.483055] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.483116] Brought up 4 CPUs
[ 0.483120] Total of 4 processors activated (10641.54 BogoMIPS).
[ 0.486105] devtmpfs: initialized
[ 0.492995] PM: Registering ACPI NVS region at b3596000 (294912 bytes)
[ 0.493024] PM: Registering ACPI NVS region at b35e8000 (12288 bytes)
[ 0.493028] PM: Registering ACPI NVS region at b361c000 (40960 bytes)
[ 0.493034] PM: Registering ACPI NVS region at b3647000 (274432 bytes)
[ 0.493279] print_constraints: dummy:
[ 0.493375] NET: Registered protocol family 16
[ 0.493528] ACPI: bus type pci registered
[ 0.493632] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.493637] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.548171] PCI: Using configuration type 1 for base access
[ 0.549103] bio: create slab <bio-0> at 0
[ 0.549269] ACPI: Added _OSI(Module Device)
[ 0.549273] ACPI: Added _OSI(Processor Device)
[ 0.549277] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.549281] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.551589] ACPI: EC: Look up EC in DSDT
[ 0.553854] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.561620] ACPI: SSDT 00000000b361cc18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.562299] ACPI: Dynamic OEM Table Load:
[ 0.562304] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.562354] ACPI Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20110623/tbutils-314)
[ 0.562362] ACPI: SSDT 00000000b361de18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.562907] ACPI: Dynamic OEM Table Load:
[ 0.562911] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.566134] ACPI: Interpreter enabled
[ 0.566142] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.566211] ACPI: Using IOAPIC for interrupt routing
[ 0.566673] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.668441] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.668761] ACPI: No dock devices found.
[ 0.668765] HEST: Table not found.
[ 0.668770] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.669038] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.669243] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.669248] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.669252] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.669256] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 0.669276] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.669305] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.669335] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[ 0.669353] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.669364] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.669372] pci 0000:00:02.0: reg 20: [io 0xf080-0xf087]
[ 0.669458] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.669497] pci 0000:00:16.0: reg 10: [mem 0xfe509000-0xfe50900f 64bit]
[ 0.669592] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.669600] pci 0000:00:16.0: PME# disabled
[ 0.669652] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.669685] pci 0000:00:1a.0: reg 10: [mem 0xfe508000-0xfe5083ff]
[ 0.669789] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.669796] pci 0000:00:1a.0: PME# disabled
[ 0.669837] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.669864] pci 0000:00:1b.0: reg 10: [mem 0xfe500000-0xfe503fff 64bit]
[ 0.669958] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.669965] pci 0000:00:1b.0: PME# disabled
[ 0.670002] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.670099] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.670106] pci 0000:00:1c.0: PME# disabled
[ 0.670149] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.670246] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.670253] pci 0000:00:1c.4: PME# disabled
[ 0.670302] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.670333] pci 0000:00:1d.0: reg 10: [mem 0xfe507000-0xfe5073ff]
[ 0.670441] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.670447] pci 0000:00:1d.0: PME# disabled
[ 0.670480] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.670577] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 0.670727] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 0.670761] pci 0000:00:1f.2: reg 10: [io 0xf070-0xf077]
[ 0.670775] pci 0000:00:1f.2: reg 14: [io 0xf060-0xf063]
[ 0.670790] pci 0000:00:1f.2: reg 18: [io 0xf050-0xf057]
[ 0.670812] pci 0000:00:1f.2: reg 1c: [io 0xf040-0xf043]
[ 0.670827] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 0.670845] pci 0000:00:1f.2: reg 24: [mem 0xfe506000-0xfe5067ff]
[ 0.670906] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.670912] pci 0000:00:1f.2: PME# disabled
[ 0.670946] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.670973] pci 0000:00:1f.3: reg 10: [mem 0xfe505000-0xfe5050ff 64bit]
[ 0.671010] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.671071] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.671108] pci 0000:00:1f.6: reg 10: [mem 0xfe504000-0xfe504fff 64bit]
[ 0.671319] pci 0000:01:00.0: [8086:422c] type 0 class 0x000280
[ 0.671371] pci 0000:01:00.0: reg 10: [mem 0xfe400000-0xfe401fff 64bit]
[ 0.671557] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.671567] pci 0000:01:00.0: PME# disabled
[ 0.678838] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.678857] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.679018] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.679090] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.679215] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.679294] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.679510] pci 0000:02:00.0: supports D1 D2
[ 0.679513] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.679530] pci 0000:02:00.0: PME# disabled
[ 0.679714] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.679720] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.679734] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.679827] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.679845] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.679849] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.679854] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.679858] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.679888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.680324] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.680551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.680629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.680887] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.681194] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.691074] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.691163] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.691248] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.691332] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.691417] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.691501] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.691589] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.691673] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.691846] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.691859] vgaarb: loaded
[ 0.691861] vgaarb: bridge control possible 0000:00:02.0
[ 0.691920] PCI: Using ACPI for IRQ routing
[ 0.703485] PCI: Discovered peer bus ff
[ 0.703539] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 0.703572] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 0.703609] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 0.703638] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 0.703667] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 0.703696] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 0.703971] PCI: pci_cache_line_size set to 64 bytes
[ 0.704088] reserve RAM buffer: 000000000009ac00 - 000000000009ffff
[ 0.704092] reserve RAM buffer: 00000000b3594000 - 00000000b3ffffff
[ 0.704100] reserve RAM buffer: 00000000b361c000 - 00000000b3ffffff
[ 0.704105] reserve RAM buffer: 00000000b3800000 - 00000000b3ffffff
[ 0.704278] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.704288] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.706314] Switching to clocksource hpet
[ 0.706663] Switched to NOHz mode on CPU #0
[ 0.706765] Switched to NOHz mode on CPU #1
[ 0.706797] Switched to NOHz mode on CPU #3
[ 0.706840] Switched to NOHz mode on CPU #2
[ 0.709187] pnp: PnP ACPI init
[ 0.709208] ACPI: bus type pnp registered
[ 0.709315] pnp 00:00: [bus 00-ff]
[ 0.709320] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.709324] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.709327] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.709331] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.709335] pnp 00:00: [mem 0x00000000 window]
[ 0.709339] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 0.709418] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.709512] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.709516] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.709519] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.709522] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.709526] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.709594] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.709600] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.709605] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.709610] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.709615] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.709619] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.709796] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.709801] pnp 00:02: [io 0x0a00-0x0a1f]
[ 0.709804] pnp 00:02: [io 0x0a20-0x0a3f]
[ 0.709865] system 00:02: [io 0x0a00-0x0a1f] has been reserved
[ 0.709871] system 00:02: [io 0x0a20-0x0a3f] has been reserved
[ 0.709875] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.709920] pnp 00:03: [io 0x0060]
[ 0.709923] pnp 00:03: [io 0x0064]
[ 0.709937] pnp 00:03: [irq 1]
[ 0.709987] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.710055] pnp 00:04: [irq 12]
[ 0.710102] pnp 00:04: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.710123] pnp 00:05: [dma 4]
[ 0.710126] pnp 00:05: [io 0x0000-0x000f]
[ 0.710130] pnp 00:05: [io 0x0081-0x0083]
[ 0.710133] pnp 00:05: [io 0x0087]
[ 0.710136] pnp 00:05: [io 0x0089-0x008b]
[ 0.710139] pnp 00:05: [io 0x008f]
[ 0.710142] pnp 00:05: [io 0x00c0-0x00df]
[ 0.710181] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.710200] pnp 00:06: [io 0x0070-0x0071]
[ 0.710210] pnp 00:06: [irq 8]
[ 0.710248] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.710264] pnp 00:07: [io 0x0061]
[ 0.710321] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.710353] pnp 00:08: [io 0x0010-0x001f]
[ 0.710356] pnp 00:08: [io 0x0022-0x003f]
[ 0.710360] pnp 00:08: [io 0x0044-0x005f]
[ 0.710363] pnp 00:08: [io 0x0072-0x007f]
[ 0.710365] pnp 00:08: [io 0x0080]
[ 0.710368] pnp 00:08: [io 0x0084-0x0086]
[ 0.710371] pnp 00:08: [io 0x0088]
[ 0.710374] pnp 00:08: [io 0x008c-0x008e]
[ 0.710377] pnp 00:08: [io 0x0090-0x009f]
[ 0.710380] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.710383] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.710386] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.710458] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.710463] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.710482] pnp 00:09: [io 0x00f0-0x00ff]
[ 0.710491] pnp 00:09: [irq 13]
[ 0.710533] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.712004] pnp 00:0a: [io 0x0400-0x047f]
[ 0.712009] pnp 00:0a: [io 0x1180-0x119f]
[ 0.712013] pnp 00:0a: [io 0x0500-0x057f]
[ 0.712016] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.712020] pnp 00:0a: [mem 0xfec00000-0xfecfffff]
[ 0.712023] pnp 00:0a: [mem 0xfed08000-0xfed08fff]
[ 0.712027] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.712115] system 00:0a: [io 0x0400-0x047f] has been reserved
[ 0.712120] system 00:0a: [io 0x1180-0x119f] has been reserved
[ 0.712125] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.712131] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.712138] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.712143] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.712149] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.712154] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.712362] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[ 0.712425] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.751189] pnp: PnP ACPI: found 12 devices
[ 0.751193] ACPI: ACPI bus type pnp unregistered
[ 0.759753] PCI: max bus depth: 1 pci_try_num: 2
[ 0.759797] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.759807] pci 0000:00:1c.0: bridge window [mem 0xfe400000-0xfe4fffff]
[ 0.759821] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.759826] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.759838] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.759848] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.759889] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.759897] pci 0000:00:1c.0: setting latency timer to 64
[ 0.759909] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.759916] pci 0000:00:1c.4: setting latency timer to 64
[ 0.759927] pci 0000:00:1e.0: setting latency timer to 64
[ 0.759933] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.759937] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.759941] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.759945] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.759948] pci_bus 0000:01: resource 1 [mem 0xfe400000-0xfe4fffff]
[ 0.759952] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.759956] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.759960] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.759963] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.759967] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.759970] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.759974] pci_bus 0000:ff: resource 0 [io 0x0000-0xffff]
[ 0.759977] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.760095] NET: Registered protocol family 2
[ 0.760342] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.761985] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.765176] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.765571] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.765575] TCP reno registered
[ 0.765589] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.765626] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.765832] NET: Registered protocol family 1
[ 0.765859] pci 0000:00:02.0: Boot video device
[ 1.022057] PCI: CLS 64 bytes, default 64
[ 1.022133] Unpacking initramfs...
[ 1.386457] Freeing initrd memory: 10100k freed
[ 1.389698] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.389706] Placing 64MB software IO TLB between ffff8800af594000 - ffff8800b3594000
[ 1.389710] software IO TLB at phys 0xaf594000 - 0xb3594000
[ 1.390594] audit: initializing netlink socket (disabled)
[ 1.390615] type=2000 audit(1327381482.232:1): initialized
[ 1.424247] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.445249] VFS: Disk quotas dquot_6.5.2
[ 1.445304] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.445426] msgmni has been set to 7274
[ 1.445745] alg: No test for stdrng (krng)
[ 1.445809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.445814] io scheduler noop registered
[ 1.445816] io scheduler deadline registered
[ 1.445848] io scheduler cfq registered (default)
[ 1.446007] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.446085] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.446210] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.446275] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[ 1.446426] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.446431] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.446438] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.446469] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.446473] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.446480] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 1.446623] intel_idle: MWAIT substates: 0x1120
[ 1.446626] intel_idle: v0.4 model 0x25
[ 1.446628] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.446729] ERST: Table is not found!
[ 1.446732] GHES: HEST is not enabled!
[ 1.446854] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.566023] Linux agpgart interface v0.103
[ 1.566146] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.566313] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.567396] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.567622] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.567833] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.576060] i8042: Detected active multiplexing controller, rev 1.1
[ 1.579230] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.579243] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.579255] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.579260] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.579264] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.579437] mousedev: PS/2 mouse device common for all mice
[ 1.579533] rtc_cmos 00:06: RTC can wake from S4
[ 1.580277] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.580315] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.580519] cpuidle: using governor ladder
[ 1.580803] cpuidle: using governor menu
[ 1.581118] TCP cubic registered
[ 1.581369] NET: Registered protocol family 10
[ 1.582308] Mobile IPv6
[ 1.582312] NET: Registered protocol family 17
[ 1.582318] Registering the dns_resolver key type
[ 1.582716] PM: Hibernation image not present or could not be loaded.
[ 1.582749] registered taskstats version 1
[ 1.593614] rtc_cmos 00:06: setting system clock to 2012-01-24 05:04:43 UTC (1327381483)
[ 1.593712] Initializing network drop monitor service
[ 1.595822] Freeing unused kernel memory: 556k freed
[ 1.595931] Write protecting the kernel read-only data: 6144k
[ 1.601891] Freeing unused kernel memory: 784k freed
[ 1.606771] Freeing unused kernel memory: 696k freed
[ 1.631057] udev[59]: starting version 164
[ 1.670025] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.676982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.677047] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.677132] r8169 0000:02:00.0: setting latency timer to 64
[ 1.688975] r8169 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.689912] r8169 0000:02:00.0: eth0: RTL8168e/8111e at 0xffffc9000064c000, 1c:6f:65:90:94:af, XID 0c200000 IRQ 42
[ 1.693010] SCSI subsystem initialized
[ 1.695673] usbcore: registered new interface driver usbfs
[ 1.695719] usbcore: registered new interface driver hub
[ 1.699974] usbcore: registered new device driver usb
[ 1.700115] libata version 3.00 loaded.
[ 1.700808] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.700860] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.700911] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.700920] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.700963] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.701016] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.705004] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.705040] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfe508000
[ 1.717282] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.717324] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.717328] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.717332] usb usb1: Product: EHCI Host Controller
[ 1.717335] usb usb1: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[ 1.717339] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.717621] hub 1-0:1.0: USB hub found
[ 1.717630] hub 1-0:1.0: 2 ports detected
[ 1.717760] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.717785] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.717790] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.717802] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.717842] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.721843] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.721869] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe507000
[ 1.737339] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.737410] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.737415] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.737419] usb usb2: Product: EHCI Host Controller
[ 1.737422] usb usb2: Manufacturer: Linux 3.1.0-1-amd64 ehci_hcd
[ 1.737425] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.737747] hub 2-0:1.0: USB hub found
[ 1.737759] hub 2-0:1.0: 2 ports detected
[ 1.737879] ahci 0000:00:1f.2: version 3.0
[ 1.737916] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.737995] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.738135] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
[ 1.738144] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 1.738155] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.746274] scsi0 : ahci
[ 1.746504] scsi1 : ahci
[ 1.746643] scsi2 : ahci
[ 1.746783] scsi3 : ahci
[ 1.746927] scsi4 : ahci
[ 1.747187] ata1: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506100 irq 43
[ 1.747190] ata2: DUMMY
[ 1.747193] ata3: DUMMY
[ 1.747194] ata4: DUMMY
[ 1.747198] ata5: SATA max UDMA/133 abar m2048@0xfe506000 port 0xfe506300 irq 43
[ 2.028980] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.064949] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.064996] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.065453] ata1.00: ATA-8: INTEL SSDSA2CW120G3, 4PC10302, max UDMA/133
[ 2.065459] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.066007] ata1.00: configured for UDMA/133
[ 2.066346] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2CW12 4PC1 PQ: 0 ANSI: 5
[ 2.073519] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.073636] sd 0:0:0:0: [sda] Write Protect is off
[ 2.073641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.073668] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.074658] sda: sda1 sda2 < sda5 >
[ 2.075377] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.165381] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.165387] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.165748] hub 1-1:1.0: USB hub found
[ 2.165810] hub 1-1:1.0: 6 ports detected
[ 2.223748] PM: Starting manual resume from disk
[ 2.223754] PM: Hibernation image partition 8:5 present
[ 2.223756] PM: Looking for hibernation image.
[ 2.224121] PM: Image not found (code -22)
[ 2.224124] PM: Hibernation image not present or could not be loaded.
[ 2.247442] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.276737] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.388550] Refined TSC clocksource calibration: 1330.152 MHz.
[ 2.388566] Switching to clocksource tsc
[ 2.413098] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.413109] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.413571] hub 2-1:1.0: USB hub found
[ 2.413717] hub 2-1:1.0: 8 ports detected
[ 2.484648] usb 1-1.3: new full speed USB device number 3 using ehci_hcd
[ 2.523976] udev[303]: starting version 164
[ 2.576996] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3000
[ 2.577003] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.586512] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.586526] ACPI: Power Button [PWRB]
[ 2.586650] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 2.587252] ACPI: acpi_idle yielding to intel_idle
[ 2.587884] ACPI: Lid Switch [LID0]
[ 2.594216] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.594228] ACPI: Power Button [PWRF]
[ 2.622214] cfg80211: Calling CRDA to update world regulatory domain
[ 2.635893] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 11, expected 14)
[ 2.635933] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.635995] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 2.646393] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 2.653392] ACPI: Battery Slot [BAT1] (battery present)
[ 2.653636] wmi: Mapper loaded
[ 2.669615] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 2.669753] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.671486] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.671491] Copyright(c) 2003-2011 Intel Corporation
[ 2.671573] iwlagn 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.671591] iwlagn 0000:01:00.0: setting latency timer to 64
[ 2.671632] iwlagn 0000:01:00.0: pci_resource_len = 0x00002000
[ 2.671637] iwlagn 0000:01:00.0: pci_resource_base = ffffc90000658000
[ 2.671642] iwlagn 0000:01:00.0: HW Revision ID = 0x3E
[ 2.671778] iwlagn 0000:01:00.0: irq 44 for MSI/MSI-X
[ 2.671846] iwlagn 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 2.671946] iwlagn 0000:01:00.0: L1 Disabled; Enabling L0S
[ 2.680376] ACPI: AC Adapter [AC] (on-line)
[ 2.688103] usb 2-1.4: new low speed USB device number 3 using ehci_hcd
[ 2.690137] iwlagn 0000:01:00.0: device EEPROM VER=0x43a, CALIB=0x6
[ 2.690144] iwlagn 0000:01:00.0: Device SKU: 0X1f0
[ 2.690224] iwlagn 0000:01:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 2.704488] [drm] Initialized drm 1.1.0 20060810
[ 2.721149] Bluetooth: Core ver 2.16
[ 2.721180] NET: Registered protocol family 31
[ 2.721184] Bluetooth: HCI device and connection manager initialized
[ 2.721190] Bluetooth: HCI socket layer initialized
[ 2.721193] Bluetooth: L2CAP socket layer initialized
[ 2.721202] Bluetooth: SCO socket layer initialized
[ 2.721705] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.721715] i915 0000:00:02.0: setting latency timer to 64
[ 2.724481] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 2.725460] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.729485] asus_wmi: Asus Management GUID not found
[ 2.740181] iwlagn 0000:01:00.0: loaded firmware version 9.221.4.1 build 25532
[ 2.740821] Registered led device: phy0-led
[ 2.748170] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.783670] usb 2-1.4: New USB device found, idVendor=0461, idProduct=4d0f
[ 2.783676] usb 2-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.783680] usb 2-1.4: Product: USB Optical Mouse
[ 2.795529] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 2.795535] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.796248] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 2.796259] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.796262] [drm] Driver supports precise vblank timestamp query.
[ 2.796342] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.799545] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input5
[ 2.799899] generic-usb 0003:0461:4D0F.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.4/input0
[ 2.800000] usbcore: registered new interface driver usbhid
[ 2.800004] usbhid: USB HID core driver
[ 2.879953] usb 2-1.5: new high speed USB device number 4 using ehci_hcd
[ 2.888847] udev[316]: renamed network interface wlan0 to wlan1
[ 3.231636] usbcore: registered new interface driver ath3k
[ 3.336101] fbcon: inteldrmfb (fb0) is primary device
[ 3.451413] usb 2-1.5: New USB device found, idVendor=174f, idProduct=1420
[ 3.451418] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.451421] usb 2-1.5: Product: USB Camera Device
[ 3.451424] usb 2-1.5: Manufacturer: Syntek
[ 3.451426] usb 2-1.5: SerialNumber: STK00001
[ 3.494643] usb 1-1.3: USB disconnect, device number 3
[ 3.501964] Linux media interface: v0.10
[ 3.505447] Linux video capture interface: v2.00
[ 3.508451] uvcvideo: Found UVC 1.00 device USB Camera Device (174f:1420)
[ 3.527463] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04711/0x200000/0x0
[ 3.544027] input: USB Camera Device as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input6
[ 3.544172] usbcore: registered new interface driver uvcvideo
[ 3.544175] USB Video Class driver (1.1.1)
[ 3.572724] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 3.579704] Console: switching to colour frame buffer device 170x48
[ 3.586586] fb0: inteldrmfb frame buffer device
[ 3.586589] drm: registered panic notifier
[ 3.605241] acpi device:3e: registered as cooling_device4
[ 3.605732] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 3.605856] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.605956] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.606083] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.606197] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 3.606250] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.656903] hda_codec: ALC269: SKU not ready 0x598301f0
[ 3.657630] hda_codec: ALC269VB: BIOS auto-probing.
[ 3.659787] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 3.664482] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0
[ 3.665144] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 3.665769] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 4.671736] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 4.671899] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 4.672062] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 4.672229] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.722088] usb 1-1.3: new full speed USB device number 4 using ehci_hcd
[ 4.814842] usb 1-1.3: New USB device found, idVendor=0cf3, idProduct=3005
[ 4.814848] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.823474] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.837612] Intel AES-NI instructions are not detected.
[ 4.855701] padlock_aes: VIA PadLock not detected.
[ 4.892330] usbcore: registered new interface driver btusb
[ 4.941953] Adding 4789244k swap on /dev/sda5. Priority:-1 extents:1 across:4789244k SS
[ 4.947785] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 4.980465] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.003340] loop: module loaded
[ 5.228325] fuse init (API version 7.17)
[ 5.593828] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 5.599065] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 5.602471] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 5.605609] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[ 5.609278] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 5.723080] Bluetooth: RFCOMM TTY layer initialized
[ 5.723090] Bluetooth: RFCOMM socket layer initialized
[ 5.723094] Bluetooth: RFCOMM ver 1.11
[ 5.730957] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.730963] Bluetooth: BNEP filters: protocol multicast
[ 5.737857] Bridge firewalling registered
[ 5.764362] lp: driver loaded but no devices found
[ 5.770699] ppdev: user-space parallel port driver
[ 5.830641] iwlagn 0000:01:00.0: L1 Disabled; Enabling L0S
[ 5.837422] iwlagn 0000:01:00.0: Radio type=0x1-0x3-0x1
[ 6.076105] iwlagn 0000:01:00.0: L1 Disabled; Enabling L0S
[ 6.082881] iwlagn 0000:01:00.0: Radio type=0x1-0x3-0x1
[ 6.179690] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 6.324155] r8169 0000:02:00.0: eth0: link down
[ 6.325426] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.890701] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 8.456413] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 16.208727] [drm] Changing LVDS panel from (-hsync, -vsync) to (-hsync, +vsync)
[ 21.466440] wlan1: authenticate with 00:14:6c:13:4c:de (try 1)
[ 21.469350] wlan1: authenticated
[ 21.469619] wlan1: associate with 00:14:6c:13:4c:de (try 1)
[ 21.471771] wlan1: RX AssocResp from 00:14:6c:13:4c:de (capab=0x411 status=0 aid=1)
[ 21.471781] wlan1: associated
[ 21.475908] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 31.896451] wlan1: no IPv6 routers present
Reply to: