|
Package: linux-2.6 Version: 2.6.32-39squeeze1 Severity: important *** Please type your report below this line *** Network traffic on my D-Link DFE-580TX card results in a transmit queue timeout and gives endless resets after that untill the interface is brought down. The amount of traffic required to generate the error seems to vary but sooner rather then later it will occur. The 1218.002863 - 1226.000260 part of the log repeats itself (with different TxFrameId's) until the interface is brought down. -- Package-specific info: ** Version: Linux version 2.6.32-5-686 (Debian 2.6.32-39squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 11 12:29:30 UTC 2012 ** Command line: auto BOOT_IMAGE=Linux ro root=801 panic=0 ** Tainted: W (512) * Taint on warning. [ 1218.000012] ------------[ cut here ]------------ [ 1218.000083] WARNING: at /build/buildd-linux-2.6_2.6.32-39squeeze1-i386-F5tMlP/linux-2.6-2.6.32/debian/build/source_i386_none/net/sched/sch_generic.c:261 dev_watchdog+0xbd/0x15d() [ 1218.000185] Hardware name: [ 1218.000235] NETDEV WATCHDOG: eth1 (sundance): transmit queue 0 timed out [ 1218.000291] Modules linked in: cpufreq_powersave cpufreq_userspace cpufreq_conservative cpufreq_stats fuse w83627ehf hwmon_vid coretemp loop snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq ohci_hcd snd_timer snd_seq_device ehci_hcd snd soundcore snd_page_alloc sundance usbcore parport_pc evdev parport nls_base button shpchp sis900 mii pci_hotplug processor psmouse pcspkr serio_raw ext3 jbd mbcache sd_mod crc_t10dif sata_sis ata_generic pata_sis thermal libata scsi_mod thermal_sys [ 1218.001916] Pid: 0, comm: swapper Not tainted 2.6.32-5-686 #1 [ 1218.001970] Call Trace: [ 1218.002026] [<c1030711>] ? warn_slowpath_common+0x5e/0x8a [ 1218.002083] [<c11e9318>] ? dev_watchdog+0x0/0x15d [ 1218.002138] [<c103076f>] ? warn_slowpath_fmt+0x26/0x2a [ 1218.002193] [<c11e93d5>] ? dev_watchdog+0xbd/0x15d [ 1218.002249] [<c102d4eb>] ? try_to_wake_up+0x2a7/0x2b3 [ 1218.002306] [<c103af54>] ? run_timer_softirq+0x16a/0x1eb [ 1218.002363] [<c10357e2>] ? __do_softirq+0xaa/0x156 [ 1218.002418] [<c10358bf>] ? do_softirq+0x31/0x3c [ 1218.002471] [<c1035999>] ? irq_exit+0x26/0x58 [ 1218.002527] [<c1014265>] ? smp_apic_timer_interrupt+0x6c/0x76 [ 1218.002586] [<c1003b35>] ? apic_timer_interrupt+0x31/0x38 [ 1218.002642] [<c100867b>] ? mwait_idle+0x62/0x6c [ 1218.002696] [<c1002377>] ? cpu_idle+0x89/0xa2 [ 1218.002753] [<c13bf806>] ? start_kernel+0x318/0x31d [ 1218.002806] ---[ end trace e996659e683dc383 ]--- [ 1218.002863] eth1: Transmit timed out, TxStatus 00 TxFrameId 08, resetting... [ 1218.002922] 00 36571000 36571010 00000001(00) 35883802 800005ea [ 1218.002926] 01 36571010 36571020 00008005(01) 35882002 800005ea [ 1218.002930] 02 36571020 36571030 00000009(02) 35881802 800005ea [ 1218.002935] 03 36571030 36571040 0000000d(03) 35882802 800005ea [ 1218.002939] 04 36571040 36571050 00000011(04) 35881002 800005ea [ 1218.002943] 05 36571050 36571060 00000015(05) 35885002 800005ea [ 1218.002947] 06 36571060 00000000 00008019(06) 35885802 800005ea [ 1218.002951] 07 36571070 36571080 0001801d(07) 00000000 00000000 [ 1218.002956] 08 36571080 36571090 00010021(08) 00000000 00000000 [ 1218.002960] 09 36571090 365710a0 00000025(09) 3641f802 800005ea [ 1218.002964] 0a 365710a0 365710b0 00000029(0a) 3641c802 800005ea [ 1218.002968] 0b 365710b0 365710c0 0000802d(0b) 35804802 800005ea [ 1218.002972] 0c 365710c0 365710d0 00000031(0c) 35807002 800005ea [ 1218.002977] 0d 365710d0 365710e0 00000035(0d) 35802002 800005ea [ 1218.002981] 0e 365710e0 365710f0 00000039(0e) 35801002 800005ea [ 1218.002985] 0f 365710f0 36571100 0000803d(0f) 35807802 800005ea [ 1218.002989] 10 36571100 36571110 00000041(10) 35803002 800005ea [ 1218.002993] 11 36571110 36571120 00000045(11) 35801802 800005ea [ 1218.002998] 12 36571120 36571130 00000049(12) 35806002 800005ea [ 1218.003002] 13 36571130 36571140 0000804d(13) 35803802 800005ea [ 1218.003006] 14 36571140 36571150 00000051(14) 35804002 800005ea [ 1218.003010] 15 36571150 36571160 00000055(15) 35806802 800005ea [ 1218.003014] 16 36571160 36571170 00000059(16) 35800802 800005ea [ 1218.003019] 17 36571170 36571180 0000805d(17) 35805802 800005ea [ 1218.003023] 18 36571180 36571190 00000061(18) 35802802 800005ea [ 1218.003027] 19 36571190 365711a0 00000065(19) 35805002 800005ea [ 1218.003032] 1a 365711a0 365711b0 00000069(1a) 36501002 800005ea [ 1218.003036] 1b 365711b0 365711c0 0000806d(1b) 35883002 800005ea [ 1218.003040] 1c 365711c0 365711d0 00000071(1c) 35880002 800005ea [ 1218.003044] 1d 365711d0 365711e0 00000075(1d) 35884002 800005ea [ 1218.003048] 1e 365711e0 365711f0 00000079(1e) 35880802 800005ea [ 1218.003053] 1f 365711f0 36571000 0000007d(1f) 35884802 800005ea [ 1218.003057] TxListPtr=36571090 netif_queue_stopped=1 [ 1218.003060] cur_tx=2649287(07) dirty_tx=2649257(09) [ 1218.003063] cur_rx=50 dirty_rx=50 [ 1218.003066] cur_task=2649287 [ 1226.000045] eth1: Transmit timed out, TxStatus 00 TxFrameId 00, resetting... [ 1226.000116] 00 36571000 36571010 00010001(00) 00000000 00000000 [ 1226.000121] 01 36571010 36571020 00008005(01) 35887002 800005ea [ 1226.000125] 02 36571020 36571030 00000009(02) 35886802 800005ea [ 1226.000129] 03 36571030 36571040 0000800d(03) 363af002 800005ea [ 1226.000133] 04 36571040 36571050 00000011(04) 363ac002 800005ea [ 1226.000138] 05 36571050 36571060 00008015(05) 363a9802 800005ea [ 1226.000142] 06 36571060 36571070 00000019(06) 363ab802 800005ea [ 1226.000146] 07 36571070 36571080 0000801d(07) 363ab002 800005ea [ 1226.000150] 08 36571080 36571090 00000021(08) 363aa002 800005ea [ 1226.000154] 09 36571090 365710a0 00000025(09) 363aa802 800005ea [ 1226.000159] 0a 365710a0 365710b0 00000029(0a) 363a8802 800005ea [ 1226.000163] 0b 365710b0 365710c0 0000002d(0b) 363ac802 800005ea [ 1226.000167] 0c 365710c0 365710d0 00000031(0c) 358a0802 800001ad [ 1226.000171] 0d 365710d0 365710e0 00000035(0d) 35831802 800005ea [ 1226.000175] 0e 365710e0 365710f0 00000039(0e) 35830802 800005ea [ 1226.000179] 0f 365710f0 36571100 0000003d(0f) 3676d802 800005ea [ 1226.000184] 10 36571100 36571110 00000041(10) 3676e002 800005ea [ 1226.000188] 11 36571110 36571120 00000045(11) 3676f802 800005ea [ 1226.000192] 12 36571120 36571130 00000049(12) 3676d002 800005ea [ 1226.000197] 13 36571130 36571140 0000004d(13) 363ba002 800005ea [ 1226.000201] 14 36571140 36571150 00000051(14) 363bc002 800005ea [ 1226.000205] 15 36571150 36571160 00000055(15) 363be802 800005ea [ 1226.000209] 16 36571160 36571170 00000059(16) 363bf002 800005ea [ 1226.000213] 17 36571170 36571180 0000005d(17) 3628d002 800005ea [ 1226.000218] 18 36571180 36571190 00000061(18) 36288002 800005ea [ 1226.000222] 19 36571190 365711a0 00000065(19) 3628b802 800005ea [ 1226.000226] 1a 365711a0 365711b0 00000069(1a) 3628b002 800005ea [ 1226.000230] 1b 365711b0 365711c0 0000006d(1b) 3628d802 800005ea [ 1226.000234] 1c 365711c0 365711d0 00000071(1c) 3628e002 800005ea [ 1226.000239] 1d 365711d0 00000000 00008075(1d) 3628c802 800005ea [ 1226.000243] 1e 365711e0 00000000 00000079(1e) 35880802 800005ea [ 1226.000247] 1f 365711f0 00000000 0000007d(1f) 35884802 800005ea [ 1226.000252] TxListPtr=36571010 netif_queue_stopped=1 [ 1226.000255] cur_tx=30(1e) dirty_tx=1(01) [ 1226.000258] cur_rx=56 dirty_rx=56 [ 1226.000260] cur_task=30 ** Model information not available ** Loaded modules: Module Size Used by cpufreq_powersave 602 0 cpufreq_userspace 1488 0 cpufreq_conservative 4018 0 cpufreq_stats 1997 0 fuse 44316 1 w83627ehf 13903 0 hwmon_vid 1528 1 w83627ehf coretemp 3401 0 loop 47352 4 snd_intel8x0 19595 0 snd_ac97_codec 79200 1 snd_intel8x0 ac97_bus 710 1 snd_ac97_codec snd_pcm 47226 2 snd_intel8x0,snd_ac97_codec snd_seq 35495 0 ohci_hcd 17023 0 snd_timer 12270 2 snd_pcm,snd_seq snd_seq_device 3673 1 snd_seq ehci_hcd 28749 0 snd 34431 6 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device soundcore 3450 1 snd snd_page_alloc 5061 2 snd_intel8x0,snd_pcm sundance 13784 0 usbcore 99017 3 ohci_hcd,ehci_hcd parport_pc 15799 0 evdev 5609 3 parport 22554 1 parport_pc nls_base 4541 1 usbcore button 3598 0 shpchp 21220 0 sis900 13815 0 mii 2714 2 sundance,sis900 pci_hotplug 18545 1 shpchp processor 26343 0 psmouse 44817 0 pcspkr 1207 0 serio_raw 2916 0 ext3 94484 2 jbd 32365 1 ext3 mbcache 3762 1 ext3 sd_mod 26029 4 crc_t10dif 1012 1 sd_mod sata_sis 2738 4 ata_generic 2247 0 pata_sis 6559 1 sata_sis thermal 9206 0 libata 115925 3 sata_sis,ata_generic,pata_sis scsi_mod 104909 2 sd_mod,libata thermal_sys 9378 2 processor,thermal ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.2.2 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 # The secondary network interface allow-hotplug eth1 iface eth1 inet static address 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.253 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:1c:c0:44:8f:3d brd ff:ff:ff:ff:ff:ff inet 192.168.2.2/24 brd 192.168.2.255 scope global eth0 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000 link/ether 00:0d:88:cd:54:b4 brd ff:ff:ff:ff:ff:ff inet 192.168.1.1/24 brd 192.168.1.255 scope global eth1 4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:0d:88:cd:54:b5 brd ff:ff:ff:ff:ff:ff 5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:0d:88:cd:54:b6 brd ff:ff:ff:ff:ff:ff 6: eth4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:0d:88:cd:54:b7 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 18726 242 0 0 0 0 0 0 18726 242 0 0 0 0 0 0 eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth1:3826490313 2598717 1 0 0 1 0 0 3905061735 2649256 9 266 0 0 0 0 eth2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth3: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth4: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 2598774 total packets received 0 forwarded 0 incoming packets discarded 88838 incoming packets delivered 139872 requests sent out 11092 outgoing packets dropped 673 dropped because of missing route 1 fragments dropped after timeout 2566979 reassemblies required 57043 packets reassembled ok 1 packet reassembles failed 57061 fragments received ok 2567745 fragments created Icmp: 57677 ICMP messages received 0 input ICMP message failed. ICMP input histogram: destination unreachable: 70 echo replies: 57607 58426 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 70 time exceeded: 1 echo request: 58355 IcmpMsg: InType0: 57607 InType3: 70 OutType3: 70 OutType8: 58355 OutType11: 1 Tcp: 43 active connections openings 22 passive connection openings 12 failed connection attempts 2 connection resets received 1 connections established 30966 segments received 81127 segments send out 45 segments retransmited 0 bad segments received. 6 resets sent Udp: 254 packets received 2 packets to unknown port received. 0 packet receive errors 288 packets sent UdpLite: TcpExt: 2 packets pruned from receive queue because of socket buffer overrun 21 TCP sockets finished time wait in fast timer 972 delayed acks sent 3 delayed acks further delayed because of locked socket Quick ack mode was activated 9 times 21 packets directly queued to recvmsg prequeue. 22 bytes directly in process context from backlog 487 bytes directly received in process context from prequeue 9891 packet headers predicted 2 packets header predicted and directly queued to user 11205 acknowledgments not containing data payload received 5596 predicted acknowledgments 5 congestion windows recovered without slow start by DSACK 5 congestion windows recovered without slow start after partial ack 1 timeouts after SACK recovery 17 other TCP timeouts 102 packets collapsed in receive queue due to low socket buffer 10 DSACKs sent for old packets 2 connections reset due to early user close 6 connections aborted due to timeout IpExt: InBcastPkts: 57 OutBcastPkts: 45 InOctets: -504678436 OutOctets: -476005903 InBcastOctets: 8215 OutBcastOctets: 6051 ** PCI devices: 00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 662 Host [1039:0662] (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32 Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=32M] Capabilities: [c0] AGP version 3.5 Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> Kernel driver in use: agpgart-sis 00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge) [1039:0003] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 82000000-820fffff Prefetchable memory behind bridge: 78000000-7fffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] [1039:0964] (rev 36) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev 01) (prog-if 80 [Master]) Subsystem: Intel Corporation Device [8086:d61f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 3c10 [size=16] Capabilities: [58] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pata_sis 00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0) Subsystem: Intel Corporation Device [8086:d61f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at 3400 [size=256] Region 1: I/O ports at 3880 [size=128] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: Intel ICH 00:03.0 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Intel Corporation Device [8086:d61f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin A routed to IRQ 20 Region 0: Memory at 82104000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Intel Corporation Device [8086:d61f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin B routed to IRQ 21 Region 0: Memory at 82103000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 0f) (prog-if 10 [OHCI]) Subsystem: Intel Corporation Device [8086:d61f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (20000ns max) Interrupt: pin C routed to IRQ 22 Region 0: Memory at 82102000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] (prog-if 20 [EHCI]) Subsystem: Silicon Integrated Systems [SiS] USB 2.0 Controller [1039:7002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 23 Region 0: Memory at 82101000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 91) Subsystem: Intel Corporation Device [8086:d61f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (13000ns min, 2750ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 3000 [size=256] Region 1: Memory at 82100000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at 82120000 [disabled] [size=128K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sis900 00:05.0 IDE interface [0101]: Silicon Integrated Systems [SiS] SATA [1039:0181] (rev 01) (prog-if 85 [Master SecO PriO]) Subsystem: Intel Corporation Device [8086:d61f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 3c28 [size=8] Region 1: I/O ports at 3c34 [size=4] Region 2: I/O ports at 3c20 [size=8] Region 3: I/O ports at 3c30 [size=4] Region 4: I/O ports at 3c00 [size=16] Region 5: I/O ports at 3800 [size=128] Capabilities: [58] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_sis 00:06.0 PCI bridge [0604]: Intel Corporation 21152 PCI-to-PCI Bridge [8086:b152] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 82200000-822fffff Prefetchable memory behind bridge: 0000000082400000-00000000824fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ 00:1f.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] PCI-to-PCI bridge [1039:0004] (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: 82300000-823fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [d0] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <2us ClockPM- Surprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- Slot #0, PowerLimit 75.000W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0100c Data: 4149 Capabilities: [f4] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport 01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter [1039:6330] (rev 04) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device [8086:d61f] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 10 BIST result: 00 Region 0: Memory at 78000000 (32-bit, prefetchable) [size=128M] Region 1: Memory at 82000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=128] Expansion ROM at <unassigned> [disabled] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] AGP version 3.0 Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none> 02:04.0 Ethernet controller [0200]: D-Link System Inc DL10050 Sundance Ethernet [1186:1002] (rev 15) Subsystem: D-Link System Inc DFE-580TX [1186:1012] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 1480 [size=128] Expansion ROM at 82400000 [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=2 PME- Kernel driver in use: sundance 02:05.0 Ethernet controller [0200]: D-Link System Inc DL10050 Sundance Ethernet [1186:1002] (rev 15) Subsystem: D-Link System Inc DFE-580TX [1186:1012] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 1400 [size=128] Expansion ROM at 82410000 [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=2 PME- Kernel driver in use: sundance 02:06.0 Ethernet controller [0200]: D-Link System Inc DL10050 Sundance Ethernet [1186:1002] (rev 15) Subsystem: D-Link System Inc DFE-580TX [1186:1012] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 1080 [size=128] Expansion ROM at 82420000 [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=2 PME- Kernel driver in use: sundance 02:07.0 Ethernet controller [0200]: D-Link System Inc DL10050 Sundance Ethernet [1186:1002] (rev 15) Subsystem: D-Link System Inc DFE-580TX [1186:1012] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 1000 [size=128] Expansion ROM at 82430000 [disabled] [size=64K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=2 PME- Kernel driver in use: sundance ** USB devices: Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-39squeeze1 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686 recommends: pn firmware-linux-free <none> (no description available) ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-5-686 suggests: ii lilo 1:22.8-10 LInux LOader - The Classic OS load pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false * linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686: |