Bug#655772: linux-image-3.1.0-1-686-pae: Aptitude upgrade of package version 3.1.6-1 -> 3.1.8-2 sent "dm_mod..." message error
Package: linux-2.6
Version: 3.1.8-2
Severity: normal
Dear Maintainer,
When I have updated package linux-image-3.1.0-1-686-pae 3.1.6-1 to
3.1.8-2, aptitude sent some error messages like this :
dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
I join current dmesg.
Regards,
-- Package-specific info:
** Version:
Linux version 3.1.0-1-686-pae (Debian 3.1.6-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Fri Dec 23 19:59:41 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=fea5336a-726d-4e2c-a0cc-61b633ddcbaa ro drm.debug=0x86
** Not tainted
** Kernel log:
[ 4.155262] usbhid: USB HID core driver
[ 4.188293] usb 2-2.3: New USB device found, idVendor=045e, idProduct=0040
[ 4.201281] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.214300] usb 2-2.3: Product: Microsoft Wheel Mouse Optical®
[ 4.227210] usb 2-2.3: Manufacturer: Microsoft
[ 4.259097] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2
[ 4.286531] generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.0-2.3/input0
[ 4.536096] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 4.603735] ata3.00: ATA-8: TOSHIBA MK1235GSL, PV010J, max UDMA/100
[ 4.618196] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.633495] ata3.00: configured for UDMA/100
[ 4.648421] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1235GS PV01 PQ: 0 ANSI: 5
[ 6.740098] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.808673] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 6.824303] sd 2:0:0:0: [sda] Write Protect is off
[ 6.839065] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.839199] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.915411] sda: sda1 sda2 < sda5 >
[ 6.931835] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.579300] PM: Starting manual resume from disk
[ 7.594847] PM: Hibernation image partition 8:5 present
[ 7.594854] PM: Looking for hibernation image.
[ 7.607799] PM: Image not found (code -22)
[ 7.607812] PM: Hibernation image not present or could not be loaded.
[ 7.698457] kjournald starting. Commit interval 5 seconds
[ 7.698787] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 10.632421] udevd[220]: starting version 175
[ 11.459344] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 11.501265] ACPI: Sleep Button [SLPB]
[ 11.524119] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 11.546651] ACPI: Power Button [PWRB]
[ 11.587496] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 11.609007] ACPI: Lid Switch [LID]
[ 11.649150] ACPI: acpi_idle yielding to intel_idle
[ 11.903951] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 13.563027] cfg80211: Calling CRDA to update world regulatory domain
[ 13.668135] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.685776] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 13.939231] hda_codec: ALC888: BIOS auto-probing.
[ 13.955378] hda_codec: ALC888: SKU not ready 0x00000100
[ 13.974410] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 13.997532] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.048208] usb 1-4: reset high speed USB device number 3 using ehci_hcd
[ 14.306988] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.309321] Registered led device: rt2800usb-phy0::radio
[ 14.309434] Registered led device: rt2800usb-phy0::assoc
[ 14.309555] Registered led device: rt2800usb-phy0::quality
[ 14.309979] usbcore: registered new interface driver rt2800usb
[ 16.938269] Adding 2650688k swap on /dev/sda5. Priority:-1 extents:1 across:2650688k
[ 17.402062] EXT3-fs (sda1): using internal journal
[ 17.603864] loop: module loaded
[ 20.055499] fuse init (API version 7.17)
[ 20.210409] r8169 0000:01:00.0: eth0: link down
[ 20.223503] r8169 0000:01:00.0: eth0: link down
[ 20.237384] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.907963] r8169 0000:01:00.0: eth0: link up
[ 21.911925] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.843619] lp: driver loaded but no devices found
[ 23.889792] ppdev: user-space parallel port driver
[ 23.959080] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[ 23.972452] parport0: irq 7 detected
[ 24.082875] lp0: using parport0 (polling).
[ 32.624053] eth0: no IPv6 routers present
[ 980.309174] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 980.716354] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 981.202937] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 981.523752] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 981.857509] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 982.258229] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 982.589440] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 983.146754] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 983.238856] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 983.547563] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 983.861972] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 984.180448] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 984.510431] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 984.827193] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 985.297956] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 985.392889] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 985.704941] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 986.019876] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 986.335076] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 986.668448] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 986.986357] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 987.487440] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 987.806367] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 988.069390] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 988.380740] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 988.697651] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 989.014866] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 989.344174] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 989.661425] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 990.408293] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 990.722982] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 991.304477] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 991.325115] SGI XFS Quota Management subsystem
[ 991.354381] JFS: nTxBlock = 8002, nTxLock = 64021
[ 991.411040] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 991.463854] QNX4 filesystem 0.2.3 registered.
[ 991.544645] Btrfs loaded
** Model information
not available
** Loaded modules:
btrfs
zlib_deflate
crc32c
libcrc32c
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
reiserfs
ext4
jbd2
crc16
ext2
acpi_cpufreq
mperf
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
parport_pc
ppdev
lp
parport
binfmt_misc
fuse
loop
kvm_intel
kvm
arc4
rt2800usb
snd_hda_codec_realtek
rt2800lib
crc_ccitt
rt2x00usb
rt2x00lib
mac80211
snd_hda_intel
snd_hda_codec
joydev
cfg80211
rfkill
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
snd_seq
snd_timer
snd_seq_device
i2c_isch
i2c_core
snd
lpc_sch
psmouse
serio_raw
evdev
soundcore
mfd_core
snd_page_alloc
pcspkr
video
processor
thermal_sys
button
ext3
jbd
mbcache
sd_mod
crc_t10dif
ata_generic
usbhid
hid
uhci_hcd
sata_sil24
pata_sch
libata
ehci_hcd
usbcore
scsi_mod
r8169
mii
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation System Controller Hub (SCH Poulsbo) [8086:8100] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.0 VGA compatible controller [0300]: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller [8086:8108] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fe980000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at c880 [size=8]
Region 2: Memory at d0000000 (32-bit, non-prefetchable) [size=256M]
Region 3: Memory at fe940000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation System Controller Hub (SCH Poulsbo) HD Audio Controller [8086:811b] (rev 07)
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe938000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 1 [8086:8110] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: cff00000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation System Controller Hub (SCH Poulsbo) PCI Express Port 2 [8086:8112] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 80000000-801fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #1 [8086:8114] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #2 [8086:8115] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at c080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB UHCI #3 [8086:8116] (rev 07) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation System Controller Hub (SCH Poulsbo) USB EHCI #1 [8086:8117] (rev 07) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe937c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119] (rev 07)
Subsystem: Intel Corporation System Controller Hub (SCH Poulsbo) LPC Bridge [8086:8119]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: lpc_sch
00:1f.1 IDE interface [0101]: Intel Corporation System Controller Hub (SCH Poulsbo) IDE Controller [8086:811a] (rev 07) (prog-if 80 [Master])
Subsystem: Intel Corporation Device [8086:8119]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: pata_sch
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
Subsystem: Realtek Semiconductor Co., Ltd. TEG-ECTX Gigabit PCI-E Adapter [Trendnet] [10ec:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at dd00 [size=256]
Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at cfff0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
02:00.0 Mass storage controller [0180]: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller [1095:3132] (rev 01)
Subsystem: Silicon Image, Inc. SiI 3132 Serial ATA Raid II Controller [1095:3132]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at febffc00 (64-bit, non-prefetchable) [size=128]
Region 2: Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
Region 4: I/O ports at e880 [size=128]
Expansion ROM at feb00000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil24
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter
Bus 002 Device 002: ID 058f:9254 Alcor Micro Corp. Hub
Bus 002 Device 003: ID 1e54:2030 TypeMatrix 2030 USB Keyboard
Bus 002 Device 004: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (650, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.1.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.1.0-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.1.0-1-686-pae recommends:
ii firmware-linux-free 3
ii libc6-i686 2.13-24
Versions of packages linux-image-3.1.0-1-686-pae suggests:
ii grub-pc 1.99-14
ii linux-doc-3.1 3.1.8-2
Versions of packages linux-image-3.1.0-1-686-pae is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-qlogic <none>
pn firmware-ralink 0.34
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.1.0-1-686-pae/prerm/removing-running-kernel-3.1.0-1-686-pae: true
linux-image-3.1.0-1-686-pae/postinst/missing-firmware-3.1.0-1-686-pae:
linux-image-3.1.0-1-686-pae/postinst/ignoring-ramdisk:
linux-image-3.1.0-1-686-pae/postinst/depmod-error-initrd-3.1.0-1-686-pae: false
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-1-686-pae (Debian 3.1.6-1) (waldi@debian.org) (gcc version 4.6.2 (Debian 4.6.2-4) ) #1 SMP Fri Dec 23 19:59:41 UTC 2011
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
[ 0.000000] BIOS-e820: 000000003f680000 - 000000003f690000 (reserved)
[ 0.000000] BIOS-e820: 000000003f690000 - 000000003f69e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f69e000 - 000000003f6d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6e0000 (reserved)
[ 0.000000] BIOS-e820: 000000003f6e8000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080015 11/19/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F700000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36d46000 - 3769b000
[ 0.000000] ACPI: RSDP 000f9080 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 3f690100 0005C (v01 111909 XSDT1533 20091119 MSFT 00000097)
[ 0.000000] ACPI: FACP 3f690290 000F4 (v04 111909 FACP1533 20091119 MSFT 00000097)
[ 0.000000] ACPI: DSDT 3f690430 03D87 (v02 7652I 7652I102 00000102 INTL 20051117)
[ 0.000000] ACPI: FACS 3f69e000 00040
[ 0.000000] ACPI: APIC 3f690390 0005C (v02 111909 APIC1533 20091119 MSFT 00000097)
[ 0.000000] ACPI: MCFG 3f6903f0 0003C (v01 111909 OEMMCFG 20091119 MSFT 00000097)
[ 0.000000] ACPI: OEMB 3f69e040 0012C (v01 111909 OEMB1533 20091119 MSFT 00000097)
[ 0.000000] ACPI: HPET 3f6941c0 00038 (v01 111909 OEMHPET 20091119 MSFT 00000097)
[ 0.000000] ACPI: GSCI 3f69e170 02024 (v01 111909 GMCHSCI 20091119 MSFT 00000097)
[ 0.000000] ACPI: SSDT 3f6a0470 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 124MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0003f680
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003f680
[ 0.000000] On node 0 totalpages: 259597
[ 0.000000] free_area_init_node: node 0, pgdat c1438840, node_mem_map f6556200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 250 pages used for memmap
[ 0.000000] HighMem zone: 31624 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6200000 s31744 r0 d21504 u1048576
[ 0.000000] pcpu-alloc: s31744 r0 d21504 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257567
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-686-pae root=UUID=fea5336a-726d-4e2c-a0cc-61b633ddcbaa ro drm.debug=0x86
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0003f680)
[ 0.000000] Memory: 1014376k/1038848k available (2766k kernel code, 24012k reserved, 1585k data, 408k init, 127496k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1440000 - 0xc14a6000 ( 408 kB)
[ 0.000000] .data : 0xc12b39ec - 0xc143ff00 (1585 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12b39ec (2766 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f5c0a000 soft=f5c0c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 1097.249 MHz processor.
[ 0.016009] Calibrating delay loop (skipped), value calculated using timer frequency.. 2194.49 BogoMIPS (lpj=4388996)
[ 0.016041] pid_max: default: 32768 minimum: 301
[ 0.016230] Security Framework initialized
[ 0.016321] Mount-cache hash table entries: 512
[ 0.017270] Initializing cgroup subsys cpuacct
[ 0.017361] Initializing cgroup subsys memory
[ 0.020015] Initializing cgroup subsys devices
[ 0.020031] Initializing cgroup subsys freezer
[ 0.020046] Initializing cgroup subsys net_cls
[ 0.020061] Initializing cgroup subsys blkio
[ 0.020157] Disabled fast string operations
[ 0.020177] CPU: Physical Processor ID: 0
[ 0.020190] CPU: Processor Core ID: 0
[ 0.020204] mce: CPU supports 5 MCE banks
[ 0.020230] CPU0: Thermal monitoring enabled (TM1)
[ 0.020247] using mwait in idle threads.
[ 0.021048] ACPI: Core revision 20110623
[ 0.032204] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032626] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073837] CPU0: Intel(R) Atom(TM) CPU Z510 @ 1.10GHz stepping 02
[ 0.076004] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.076004] ... version: 3
[ 0.076004] ... bit width: 40
[ 0.076004] ... generic registers: 2
[ 0.076004] ... value mask: 000000ffffffffff
[ 0.076004] ... max period: 000000007fffffff
[ 0.076004] ... fixed-purpose events: 3
[ 0.076004] ... event mask: 0000000700000003
[ 0.076004] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.076004] CPU 1 irqstacks, hard=f5cb4000 soft=f5cb6000
[ 0.076004] Booting Node 0, Processors #1 Ok.
[ 0.076004] smpboot cpu 1: start_ip = 99000
[ 0.020001] Initializing CPU#1
[ 0.020001] Disabled fast string operations
[ 0.168098] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.168235] Brought up 2 CPUs
[ 0.168257] Total of 2 processors activated (4389.04 BogoMIPS).
[ 0.169350] devtmpfs: initialized
[ 0.169350] PM: Registering ACPI NVS region at 3f69e000 (204800 bytes)
[ 0.169350] print_constraints: dummy:
[ 0.169350] NET: Registered protocol family 16
[ 0.172101] ACPI: bus type pci registered
[ 0.172526] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.172553] PCI: not using MMCONFIG
[ 0.172872] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.172980] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
[ 0.172995] PCI: Using configuration type 1 for base access
[ 0.174496] bio: create slab <bio-0> at 0
[ 0.174496] ACPI: Added _OSI(Module Device)
[ 0.174496] ACPI: Added _OSI(Processor Device)
[ 0.174496] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.174496] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.178342] ACPI: EC: Look up EC in DSDT
[ 0.181143] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.185952] ACPI Warning: Incorrect checksum in table [OEMB] - 0x47, should be 0x98 (20110623/tbutils-314)
[ 0.186953] ACPI: SSDT 3f6a0270 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.187638] ACPI: Dynamic OEM Table Load:
[ 0.187658] ACPI: SSDT (null) 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.188598] ACPI: SSDT 3f6a01a0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.189257] ACPI: Dynamic OEM Table Load:
[ 0.189277] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.189814] ACPI: Interpreter enabled
[ 0.189842] ACPI: (supports S0 S3 S4 S5)
[ 0.189920] ACPI: Using IOAPIC for interrupt routing
[ 0.190020] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.193996] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.194021] PCI: Using MMCONFIG for extended config space
[ 0.195317] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.206925] ACPI: No dock devices found.
[ 0.206947] HEST: Table not found.
[ 0.206968] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.207319] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.208053] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.208076] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.208094] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.208116] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.208138] pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0xdfffffff]
[ 0.208159] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff]
[ 0.208192] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000ce800-0x000d27ff])
[ 0.208256] pci 0000:00:00.0: [8086:8100] type 0 class 0x000600
[ 0.208374] pci 0000:00:02.0: [8086:8108] type 0 class 0x000300
[ 0.208411] pci 0000:00:02.0: reg 10: [mem 0xfe980000-0xfe9fffff]
[ 0.208431] pci 0000:00:02.0: reg 14: [io 0xc880-0xc887]
[ 0.208450] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff]
[ 0.208470] pci 0000:00:02.0: reg 1c: [mem 0xfe940000-0xfe97ffff]
[ 0.208623] pci 0000:00:1b.0: [8086:811b] type 0 class 0x000403
[ 0.208656] pci 0000:00:1b.0: reg 10: [mem 0xfe938000-0xfe93bfff 64bit]
[ 0.208746] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 0.208758] pci 0000:00:1b.0: PME# disabled
[ 0.208800] pci 0000:00:1c.0: [8086:8110] type 1 class 0x000604
[ 0.208887] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.208899] pci 0000:00:1c.0: PME# disabled
[ 0.208944] pci 0000:00:1c.1: [8086:8112] type 1 class 0x000604
[ 0.209032] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.209043] pci 0000:00:1c.1: PME# disabled
[ 0.209089] pci 0000:00:1d.0: [8086:8114] type 0 class 0x000c03
[ 0.209151] pci 0000:00:1d.0: reg 20: [io 0xc480-0xc49f]
[ 0.209209] pci 0000:00:1d.1: [8086:8115] type 0 class 0x000c03
[ 0.209273] pci 0000:00:1d.1: reg 20: [io 0xc080-0xc09f]
[ 0.209329] pci 0000:00:1d.2: [8086:8116] type 0 class 0x000c03
[ 0.209392] pci 0000:00:1d.2: reg 20: [io 0xb880-0xb89f]
[ 0.209472] pci 0000:00:1d.7: [8086:8117] type 0 class 0x000c03
[ 0.209515] pci 0000:00:1d.7: reg 10: [mem 0xfe937c00-0xfe937fff]
[ 0.209655] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.209668] pci 0000:00:1d.7: PME# disabled
[ 0.209707] pci 0000:00:1f.0: [8086:8119] type 0 class 0x000601
[ 0.209823] pci 0000:00:1f.1: [8086:811a] type 0 class 0x000101
[ 0.209887] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.210030] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.210062] pci 0000:01:00.0: reg 10: [io 0xdd00-0xddff]
[ 0.210108] pci 0000:01:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit]
[ 0.210141] pci 0000:01:00.0: reg 20: [mem 0xcfff0000-0xcfffffff 64bit pref]
[ 0.210166] pci 0000:01:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.210229] pci 0000:01:00.0: supports D1 D2
[ 0.210237] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.210250] pci 0000:01:00.0: PME# disabled
[ 0.216057] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.216080] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.216092] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.216104] pci 0000:00:1c.0: bridge window [mem 0xcff00000-0xcfffffff pref]
[ 0.216211] pci 0000:02:00.0: [1095:3132] type 0 class 0x000180
[ 0.216261] pci 0000:02:00.0: reg 10: [mem 0xfebffc00-0xfebffc7f 64bit]
[ 0.216297] pci 0000:02:00.0: reg 18: [mem 0xfebf8000-0xfebfbfff 64bit]
[ 0.216323] pci 0000:02:00.0: reg 20: [io 0xe880-0xe8ff]
[ 0.216365] pci 0000:02:00.0: reg 30: [mem 0xfeb00000-0xfeb7ffff pref]
[ 0.216429] pci 0000:02:00.0: supports D1 D2
[ 0.216463] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.216503] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.216522] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.216534] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.216562] pci_bus 0000:00: on NUMA node 0
[ 0.216575] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.216967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP4._PRT]
[ 0.217102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.POP5._PRT]
[ 0.217222] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.217245] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.217266] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.229190] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.229396] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.229596] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.229793] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.229998] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.230207] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.230414] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.230621] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.230955] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.230955] vgaarb: loaded
[ 0.230955] vgaarb: bridge control possible 0000:00:02.0
[ 0.230955] PCI: Using ACPI for IRQ routing
[ 0.230955] PCI: pci_cache_line_size set to 64 bytes
[ 0.230955] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.230955] reserve RAM buffer: 000000003f680000 - 000000003fffffff
[ 0.230955] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.230955] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.230955] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.236084] Switching to clocksource hpet
[ 0.239687] Switched to NOHz mode on CPU #0
[ 0.239854] Switched to NOHz mode on CPU #1
[ 0.241648] pnp: PnP ACPI init
[ 0.241730] ACPI: bus type pnp registered
[ 0.242155] pnp 00:00: [bus 00-ff]
[ 0.242167] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.242176] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.242186] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.242195] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.242204] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.242214] pnp 00:00: [mem 0x3f800000-0xdfffffff window]
[ 0.242223] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[ 0.242388] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.242698] pnp 00:01: [mem 0x40000000-0x7fffffff]
[ 0.242708] pnp 00:01: [mem 0x3f800000-0x3fffffff]
[ 0.242857] system 00:01: [mem 0x40000000-0x7fffffff] has been reserved
[ 0.242881] system 00:01: [mem 0x3f800000-0x3fffffff] has been reserved
[ 0.242902] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.243011] pnp 00:02: [io 0x0070-0x0071]
[ 0.243042] pnp 00:02: [irq 8]
[ 0.243141] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.243331] pnp 00:03: [io 0x0061]
[ 0.243451] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.243492] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.243511] pnp 00:04: [irq 13]
[ 0.243610] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.243957] pnp 00:05: [io 0x0000-0xffffffffffffffff disabled]
[ 0.243968] pnp 00:05: [io 0x0a00-0x0a0f]
[ 0.243977] pnp 00:05: [io 0x0a10-0x0a1f]
[ 0.244178] system 00:05: [io 0x0a00-0x0a0f] has been reserved
[ 0.244201] system 00:05: [io 0x0a10-0x0a1f] has been reserved
[ 0.244221] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.244628] pnp 00:06: [io 0x0010-0x001f]
[ 0.244638] pnp 00:06: [io 0x0022-0x003f]
[ 0.244646] pnp 00:06: [io 0x0044-0x005f]
[ 0.244654] pnp 00:06: [io 0x0063]
[ 0.244662] pnp 00:06: [io 0x0065]
[ 0.244669] pnp 00:06: [io 0x0067-0x006f]
[ 0.244677] pnp 00:06: [io 0x0072-0x007f]
[ 0.244685] pnp 00:06: [io 0x0080]
[ 0.244693] pnp 00:06: [io 0x0084-0x0086]
[ 0.244701] pnp 00:06: [io 0x0088]
[ 0.244708] pnp 00:06: [io 0x008c-0x008e]
[ 0.244716] pnp 00:06: [io 0x0090-0x009f]
[ 0.244724] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.244732] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.244741] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.244754] pnp 00:06: [io 0x0900-0x09f3]
[ 0.244763] pnp 00:06: [io 0x0400-0x043f]
[ 0.244771] pnp 00:06: [io 0x0480-0x04bf]
[ 0.244780] pnp 00:06: [mem 0xf0000000-0xf0003fff]
[ 0.244953] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.244975] system 00:06: [io 0x0900-0x09f3] has been reserved
[ 0.244993] system 00:06: [io 0x0400-0x043f] has been reserved
[ 0.245012] system 00:06: [io 0x0480-0x04bf] has been reserved
[ 0.245032] system 00:06: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.245052] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.245140] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 0.245247] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.245441] pnp 00:08: [mem 0xff800000-0xffbfffff]
[ 0.245451] pnp 00:08: [mem 0xffc00000-0xffffffff]
[ 0.245553] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.245730] pnp 00:09: [mem 0xffc00000-0xffbfffff disabled]
[ 0.245867] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.246218] pnp 00:0a: [io 0x0060]
[ 0.246228] pnp 00:0a: [io 0x0064]
[ 0.246237] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.246245] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.246390] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.246414] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.246434] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.246574] pnp 00:0b: [mem 0xe0000000-0xefffffff]
[ 0.246721] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.246743] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.247276] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.247286] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.247295] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.247304] pnp 00:0c: [mem 0x00100000-0x3f7fffff]
[ 0.247313] pnp 00:0c: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.247453] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.247476] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.247497] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.247517] system 00:0c: [mem 0x00100000-0x3f7fffff] could not be reserved
[ 0.247538] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.248076] pnp: PnP ACPI: found 13 devices
[ 0.248092] ACPI: ACPI bus type pnp unregistered
[ 0.248111] PnPBIOS: Disabled by ACPI PNP
[ 0.292845] PCI: max bus depth: 1 pci_try_num: 2
[ 0.292897] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80000000-0x801fffff pref]
[ 0.292927] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.292945] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.292968] pci 0000:00:1c.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.292989] pci 0000:00:1c.0: bridge window [mem 0xcff00000-0xcfffffff pref]
[ 0.293017] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.293034] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.293055] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.293076] pci 0000:00:1c.1: bridge window [mem 0x80000000-0x801fffff pref]
[ 0.293138] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.293161] pci 0000:00:1c.0: setting latency timer to 64
[ 0.293186] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.293207] pci 0000:00:1c.1: setting latency timer to 64
[ 0.293219] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.293228] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.293237] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.293247] pci_bus 0000:00: resource 7 [mem 0x3f800000-0xdfffffff]
[ 0.293256] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xffffffff]
[ 0.293266] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.293275] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.293285] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff pref]
[ 0.293295] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.293304] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.293314] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff pref]
[ 0.293526] NET: Registered protocol family 2
[ 0.293839] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.294844] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.296441] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.297238] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.297262] TCP reno registered
[ 0.297282] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.297324] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.297912] NET: Registered protocol family 1
[ 0.297990] pci 0000:00:02.0: Boot video device
[ 0.298162] PCI: CLS 32 bytes, default 64
[ 0.298335] Unpacking initramfs...
[ 1.014232] Freeing initrd memory: 9556k freed
[ 1.032229] audit: initializing netlink socket (disabled)
[ 1.032284] type=2000 audit(1326500836.028:1): initialized
[ 1.079723] highmem bounce pool size: 64 pages
[ 1.079755] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.087517] VFS: Disk quotas dquot_6.5.2
[ 1.087805] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.088241] msgmni has been set to 1750
[ 1.088901] alg: No test for stdrng (krng)
[ 1.089036] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.089061] io scheduler noop registered
[ 1.089075] io scheduler deadline registered
[ 1.089132] io scheduler cfq registered (default)
[ 1.089779] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 1.089797] vesafb: scrolling: redraw
[ 1.089813] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.090510] vesafb: framebuffer at 0x3f800000, mapped to 0xf8280000, using 1536k, total 1536k
[ 1.119558] Console: switching to colour frame buffer device 128x48
[ 1.148470] fb0: VESA VGA frame buffer device
[ 1.148794] intel_idle: MWAIT substates: 0x3020220
[ 1.148815] intel_idle: v0.4 model 0x1C
[ 1.148821] intel_idle: lapic_timer_reliable_states 0x2
[ 1.148862] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.149394] ERST: Table is not found!
[ 1.149603] GHES: HEST is not enabled!
[ 1.149855] isapnp: Scanning for PnP cards...
[ 1.461691] isapnp: No Plug & Play device found
[ 1.462225] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.483246] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.504406] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.517073] Linux agpgart interface v0.103
[ 1.518026] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.521575] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.521877] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.522702] mousedev: PS/2 mouse device common for all mice
[ 1.523167] rtc_cmos 00:02: RTC can wake from S4
[ 1.523697] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.524108] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.524840] cpuidle: using governor ladder
[ 1.525597] cpuidle: using governor menu
[ 1.526623] TCP cubic registered
[ 1.526982] NET: Registered protocol family 10
[ 1.529322] Mobile IPv6
[ 1.529475] NET: Registered protocol family 17
[ 1.540429] Registering the dns_resolver key type
[ 1.551775] Using IPI No-Shortcut mode
[ 1.563183] PM: Hibernation image not present or could not be loaded.
[ 1.563221] registered taskstats version 1
[ 1.578387] rtc_cmos 00:02: setting system clock to 2012-01-14 00:27:16 UTC (1326500836)
[ 1.589639] Initializing network drop monitor service
[ 1.601067] Freeing unused kernel memory: 408k freed
[ 1.612691] Write protecting the kernel text: 2768k
[ 1.623908] Write protecting the kernel read-only data: 1092k
[ 1.634889] NX-protecting the kernel data: 3376k
[ 1.704435] udevd[48]: starting version 175
[ 1.826748] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.878055] SCSI subsystem initialized
[ 1.890640] usbcore: registered new interface driver usbfs
[ 1.920183] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.948233] usbcore: registered new interface driver hub
[ 1.997133] r8169 0000:01:00.0: setting latency timer to 64
[ 1.997239] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 1.999463] r8169 0000:01:00.0: eth0: RTL8168c/8111c at 0xf820e000, 00:50:c2:20:2d:f1, XID 1c4000c0 IRQ 40
[ 2.018276] usbcore: registered new device driver usb
[ 2.032724] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.050369] libata version 3.00 loaded.
[ 2.051422] pata_sch 0000:00:1f.1: version 0.2
[ 2.051625] pata_sch 0000:00:1f.1: setting latency timer to 64
[ 2.054298] scsi0 : pata_sch
[ 2.067958] scsi1 : pata_sch
[ 2.081232] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.094427] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.097807] sata_sil24 0000:02:00.0: version 1.1
[ 2.097848] sata_sil24 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.098064] sata_sil24 0000:02:00.0: setting latency timer to 64
[ 2.120492] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.133621] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.133640] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.146398] scsi2 : sata_sil24
[ 2.159604] scsi3 : sata_sil24
[ 2.164210] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.164320] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.168233] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.168309] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe937c00
[ 2.205269] ata3: SATA max UDMA/100 host m128@0xfebffc00 port 0xfebf8000 irq 17
[ 2.208069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.208196] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.208208] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.208218] usb usb1: Product: EHCI Host Controller
[ 2.208226] usb usb1: Manufacturer: Linux 3.1.0-1-686-pae ehci_hcd
[ 2.208235] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.285409] ata4: SATA max UDMA/100 host m128@0xfebffc00 port 0xfebfa000 irq 17
[ 2.286484] hub 1-0:1.0: USB hub found
[ 2.286507] hub 1-0:1.0: 8 ports detected
[ 2.351563] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.374959] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.386933] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.386948] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.399102] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.411205] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c480
[ 2.423298] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.435446] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.447677] usb usb2: Product: UHCI Host Controller
[ 2.459849] usb usb2: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 2.472155] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.484776] hub 2-0:1.0: USB hub found
[ 2.496690] hub 2-0:1.0: 2 ports detected
[ 2.508814] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.520851] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.520867] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.533007] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.533073] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c080
[ 2.533241] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.533253] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.533263] usb usb3: Product: UHCI Host Controller
[ 2.533272] usb usb3: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 2.533281] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.628712] hub 3-0:1.0: USB hub found
[ 2.640495] hub 3-0:1.0: 2 ports detected
[ 2.652189] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.663617] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.663628] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.674883] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.686255] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880
[ 2.697771] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.709215] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.720852] usb usb4: Product: UHCI Host Controller
[ 2.732391] usb usb4: Manufacturer: Linux 3.1.0-1-686-pae uhci_hcd
[ 2.743857] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.755859] hub 4-0:1.0: USB hub found
[ 2.767229] hub 4-0:1.0: 2 ports detected
[ 2.796119] usb 1-4: new high speed USB device number 3 using ehci_hcd
[ 2.962008] usb 1-4: New USB device found, idVendor=148f, idProduct=3070
[ 2.973578] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.985198] usb 1-4: Product: 802.11 n WLAN
[ 2.996594] usb 1-4: Manufacturer: Ralink
[ 3.007797] usb 1-4: SerialNumber: 1.0
[ 3.132136] usb 2-2: new full speed USB device number 2 using uhci_hcd
[ 3.313319] usb 2-2: New USB device found, idVendor=058f, idProduct=9254
[ 3.324562] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.335798] usb 2-2: Product: Generic USB Hub
[ 3.335808] usb 2-2: Manufacturer: ALCOR
[ 3.359632] hub 2-2:1.0: USB hub found
[ 3.372327] hub 2-2:1.0: 4 ports detected
[ 3.665317] usb 2-2.1: new low speed USB device number 3 using uhci_hcd
[ 3.885330] usb 2-2.1: New USB device found, idVendor=1e54, idProduct=2030
[ 3.896263] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.907130] usb 2-2.1: Product: USB Keyboard
[ 3.918013] usb 2-2.1: Manufacturer: TypeMatrix.com
[ 4.000155] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.0/input/input0
[ 4.011880] generic-usb 0003:1E54:2030.0001: input,hidraw0: USB HID v1.10 Keyboard [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-2.1/input0
[ 4.035309] usb 2-2.3: new low speed USB device number 4 using uhci_hcd
[ 4.103136] input: TypeMatrix.com USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.1/2-2.1:1.1/input/input1
[ 4.116638] generic-usb 0003:1E54:2030.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [TypeMatrix.com USB Keyboard] on usb-0000:00:1d.0-2.1/input1
[ 4.142318] usbcore: registered new interface driver usbhid
[ 4.155262] usbhid: USB HID core driver
[ 4.188293] usb 2-2.3: New USB device found, idVendor=045e, idProduct=0040
[ 4.201281] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.214300] usb 2-2.3: Product: Microsoft Wheel Mouse Optical®
[ 4.227210] usb 2-2.3: Manufacturer: Microsoft
[ 4.259097] input: Microsoft Microsoft Wheel Mouse Optical® as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2.3/2-2.3:1.0/input/input2
[ 4.286531] generic-usb 0003:045E:0040.0003: input,hidraw2: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.0-2.3/input0
[ 4.536096] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[ 4.603735] ata3.00: ATA-8: TOSHIBA MK1235GSL, PV010J, max UDMA/100
[ 4.618196] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.633495] ata3.00: configured for UDMA/100
[ 4.648421] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK1235GS PV01 PQ: 0 ANSI: 5
[ 6.740098] ata4: SATA link down (SStatus 0 SControl 0)
[ 6.808673] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 6.824303] sd 2:0:0:0: [sda] Write Protect is off
[ 6.839065] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.839199] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.915411] sda: sda1 sda2 < sda5 >
[ 6.931835] sd 2:0:0:0: [sda] Attached SCSI disk
[ 7.579300] PM: Starting manual resume from disk
[ 7.594847] PM: Hibernation image partition 8:5 present
[ 7.594854] PM: Looking for hibernation image.
[ 7.607799] PM: Image not found (code -22)
[ 7.607812] PM: Hibernation image not present or could not be loaded.
[ 7.698457] kjournald starting. Commit interval 5 seconds
[ 7.698787] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 10.632421] udevd[220]: starting version 175
[ 11.459344] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 11.501265] ACPI: Sleep Button [SLPB]
[ 11.524119] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 11.546651] ACPI: Power Button [PWRB]
[ 11.587496] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
[ 11.609007] ACPI: Lid Switch [LID]
[ 11.649150] ACPI: acpi_idle yielding to intel_idle
[ 11.903951] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 13.563027] cfg80211: Calling CRDA to update world regulatory domain
[ 13.668135] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.685776] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 13.939231] hda_codec: ALC888: BIOS auto-probing.
[ 13.955378] hda_codec: ALC888: SKU not ready 0x00000100
[ 13.974410] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 13.997532] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.048208] usb 1-4: reset high speed USB device number 3 using ehci_hcd
[ 14.306988] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.309321] Registered led device: rt2800usb-phy0::radio
[ 14.309434] Registered led device: rt2800usb-phy0::assoc
[ 14.309555] Registered led device: rt2800usb-phy0::quality
[ 14.309979] usbcore: registered new interface driver rt2800usb
[ 16.938269] Adding 2650688k swap on /dev/sda5. Priority:-1 extents:1 across:2650688k
[ 17.402062] EXT3-fs (sda1): using internal journal
[ 17.603864] loop: module loaded
[ 20.055499] fuse init (API version 7.17)
[ 20.210409] r8169 0000:01:00.0: eth0: link down
[ 20.223503] r8169 0000:01:00.0: eth0: link down
[ 20.237384] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.907963] r8169 0000:01:00.0: eth0: link up
[ 21.911925] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.843619] lp: driver loaded but no devices found
[ 23.889792] ppdev: user-space parallel port driver
[ 23.959080] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[ 23.972452] parport0: irq 7 detected
[ 24.082875] lp0: using parport0 (polling).
[ 32.624053] eth0: no IPv6 routers present
[ 980.309174] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 980.716354] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 981.202937] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 981.523752] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 981.857509] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 982.258229] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 982.589440] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 983.146754] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 983.238856] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 983.547563] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 983.861972] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 984.180448] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 984.510431] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 984.827193] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 985.297956] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 985.392889] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 985.704941] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 986.019876] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 986.335076] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 986.668448] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 986.986357] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 987.487440] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 987.806367] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 988.069390] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 988.380740] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 988.697651] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 989.014866] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 989.344174] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 989.661425] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 990.408293] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 990.722982] dm_mod: Unknown symbol scsi_verify_blk_ioctl (err 0)
[ 991.304477] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 991.325115] SGI XFS Quota Management subsystem
[ 991.354381] JFS: nTxBlock = 8002, nTxLock = 64021
[ 991.411040] NTFS driver 2.1.30 [Flags: R/W MODULE].
[ 991.463854] QNX4 filesystem 0.2.3 registered.
[ 991.544645] Btrfs loaded
Reply to: