[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#583082: closed by Jonathan Nieder <jrnieder@gmail.com> (Re: kernel: khubd crash)



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi!

On Thu, 24 Nov 2011, Debian Bug Tracking System wrote:

> This is an automatic notification regarding your Bug report
> which was filed against the linux-2.6 package:
> 
> #583082: kernel: khubd crash
> 
> It has been closed by Jonathan Nieder <jrnieder@gmail.com>.
> 
> Their explanation is attached below along with your original report.
> If this explanation is unsatisfactory and you have not received a
> better one in a separate message then please contact Jonathan Nieder <jrnieder@gmail.com> by
> replying to this email.
USB drive is recognized only the first time. Does not matter which USB 
port I use. See attached file.


Sincerely,
Gabriel

- -- 

// Gabriel VLASIU
//
// OpenGPG-KeyID      : 0xE684206E
// OpenGPG-Fingerprint: 0C3D 9F8B 725D E243 CB3C 8428 796A DB1F E684 206E
// OpenGPG-URL        : http://www.vlasiu.net/public.key


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)

iEYEARECAAYFAk8NmT4ACgkQeWrbH+aEIG486QCfVl9j0xHi199qXqU3KlQqfd1S
bJAAnArEnnzOpbWIRbYcen/kI88YcF0T
=nJO1
-----END PGP SIGNATURE-----
Jan 11 15:58:37 mailq kernel: [  215.496407] usb 1-3: new high-speed USB device number 2 using ehci_hcd
Jan 11 15:58:37 mailq kernel: [  215.649234] usb 1-3: New USB device found, idVendor=1005, idProduct=b113
Jan 11 15:58:37 mailq kernel: [  215.649271] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 11 15:58:37 mailq kernel: [  215.649303] usb 1-3: Product: USB FLASH DRIVE
Jan 11 15:58:37 mailq kernel: [  215.649327] usb 1-3: Manufacturer:         
Jan 11 15:58:37 mailq kernel: [  215.649351] usb 1-3: SerialNumber: 07AB061376562D50
Jan 11 15:58:37 mailq kernel: [  215.752110] usbcore: registered new interface driver uas
Jan 11 15:58:37 mailq kernel: [  215.781928] Initializing USB Mass Storage driver...
Jan 11 15:58:37 mailq kernel: [  215.782628] scsi2 : usb-storage 1-3:1.0
Jan 11 15:58:37 mailq kernel: [  215.783666] usbcore: registered new interface driver usb-storage
Jan 11 15:58:37 mailq kernel: [  215.783694] USB Mass Storage support registered.
Jan 11 15:58:38 mailq kernel: [  216.878129] scsi 2:0:0:0: Direct-Access              USB FLASH DRIVE  PMAP PQ: 0 ANSI: 0 CCS
Jan 11 15:58:38 mailq kernel: [  216.886126] sd 2:0:0:0: Attached scsi generic sg3 type 0
Jan 11 15:58:39 mailq kernel: [  217.582722] sd 2:0:0:0: [sdc] 7834944 512-byte logical blocks: (4.01 GB/3.73 GiB)
Jan 11 15:58:39 mailq kernel: [  217.583813] sd 2:0:0:0: [sdc] Write Protect is off
Jan 11 15:58:39 mailq kernel: [  217.586215] sd 2:0:0:0: [sdc] No Caching mode page present
Jan 11 15:58:39 mailq kernel: [  217.586463] sd 2:0:0:0: [sdc] Assuming drive cache: write through
Jan 11 15:58:39 mailq kernel: [  217.595198] sd 2:0:0:0: [sdc] No Caching mode page present
Jan 11 15:58:39 mailq kernel: [  217.595426] sd 2:0:0:0: [sdc] Assuming drive cache: write through
Jan 11 15:58:39 mailq kernel: [  217.608801]  sdc: sdc1
Jan 11 15:58:39 mailq kernel: [  217.619205] sd 2:0:0:0: [sdc] No Caching mode page present
Jan 11 15:58:39 mailq kernel: [  217.619438] sd 2:0:0:0: [sdc] Assuming drive cache: write through
Jan 11 15:58:39 mailq kernel: [  217.619680] sd 2:0:0:0: [sdc] Attached SCSI removable disk
Jan 11 15:59:06 mailq kernel: [  244.627374] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Jan 11 15:59:25 mailq kernel: [  263.663507] usb 1-3: USB disconnect, device number 2
Jan 11 15:59:38 mailq kernel: [  276.671204] usb 3-1: new full-speed USB device number 2 using ohci_hcd
Jan 11 15:59:38 mailq kernel: [  276.811179] usb 3-1: device descriptor read/64, error -73
Jan 11 15:59:38 mailq kernel: [  276.983186] hub 3-0:1.0: unable to enumerate USB device on port 1
Jan 11 15:59:39 mailq kernel: [  277.351149] usb 1-3: new high-speed USB device number 4 using ehci_hcd
Jan 11 15:59:39 mailq kernel: [  277.488028] usb 1-3: New USB device found, idVendor=1005, idProduct=b113
Jan 11 15:59:39 mailq kernel: [  277.488065] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 11 15:59:39 mailq kernel: [  277.488097] usb 1-3: Product: USB FLASH DRIVE
Jan 11 15:59:39 mailq kernel: [  277.488121] usb 1-3: Manufacturer:         
Jan 11 15:59:39 mailq kernel: [  277.488145] usb 1-3: SerialNumber: 07AB061376562D50
Jan 11 15:59:39 mailq kernel: [  277.503311] scsi3 : usb-storage 1-3:1.0
Jan 11 15:59:40 mailq kernel: [  278.596804] scsi 3:0:0:0: Direct-Access              USB FLASH DRIVE  PMAP PQ: 0 ANSI: 0 CCS
Jan 11 15:59:40 mailq kernel: [  278.605258] sd 3:0:0:0: Attached scsi generic sg3 type 0
Jan 11 16:00:00 mailq kernel: [  299.226479] usb 1-3: USB disconnect, device number 4
Jan 11 16:00:11 mailq kernel: [  309.824466] sd 3:0:0:0: Device offlined - not ready after error recovery
Jan 11 16:00:11 mailq kernel: [  309.830118] sd 3:0:0:0: [sdc] READ CAPACITY failed
Jan 11 16:00:11 mailq kernel: [  309.830148] sd 3:0:0:0: [sdc]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Jan 11 16:00:11 mailq kernel: [  309.830192] sd 3:0:0:0: [sdc] Sense not available.
Jan 11 16:00:11 mailq kernel: [  309.830322] sd 3:0:0:0: [sdc] Write Protect is off
Jan 11 16:00:11 mailq kernel: [  309.830481] sd 3:0:0:0: [sdc] Asking for cache data failed
Jan 11 16:00:11 mailq kernel: [  309.830788] sd 3:0:0:0: [sdc] Assuming drive cache: write through
Jan 11 16:00:11 mailq kernel: [  309.844379] sd 3:0:0:0: [sdc] READ CAPACITY failed
Jan 11 16:00:11 mailq kernel: [  309.844407] sd 3:0:0:0: [sdc]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
Jan 11 16:00:11 mailq kernel: [  309.844446] sd 3:0:0:0: [sdc] Sense not available.
Jan 11 16:00:11 mailq kernel: [  309.844650] sd 3:0:0:0: [sdc] Asking for cache data failed
Jan 11 16:00:11 mailq kernel: [  309.844953] sd 3:0:0:0: [sdc] Assuming drive cache: write through
Jan 11 16:00:11 mailq kernel: [  309.845264] sd 3:0:0:0: [sdc] Attached SCSI removable disk
Jan 11 16:00:14 mailq kernel: [  312.284197] usb 3-1: new full-speed USB device number 3 using ohci_hcd
Jan 11 16:00:14 mailq kernel: [  312.424168] usb 3-1: device descriptor read/64, error -73
Jan 11 16:00:14 mailq kernel: [  312.668142] usb 3-1: device descriptor read/64, error -73
Jan 11 16:00:14 mailq kernel: [  312.900127] usb 3-1: new full-speed USB device number 4 using ohci_hcd
Jan 11 16:00:14 mailq kernel: [  313.040111] usb 3-1: device descriptor read/64, error -73
Jan 11 16:00:15 mailq kernel: [  313.284128] usb 3-1: device descriptor read/64, error -73
Jan 11 16:00:15 mailq kernel: [  313.516077] usb 3-1: new full-speed USB device number 5 using ohci_hcd
Jan 11 16:00:15 mailq kernel: [  313.924041] usb 3-1: device not accepting address 5, error -73
Jan 11 16:00:15 mailq kernel: [  314.052045] usb 3-1: new full-speed USB device number 6 using ohci_hcd
Jan 11 16:00:16 mailq kernel: [  314.459986] usb 3-1: device not accepting address 6, error -73
Jan 11 16:00:16 mailq kernel: [  314.460325] hub 3-0:1.0: unable to enumerate USB device on port 1
Jan 11 16:00:31 mailq kernel: [  329.802683] usb 1-3: new high-speed USB device number 6 using ehci_hcd
Jan 11 16:00:46 mailq kernel: [  344.893420] hub 1-0:1.0: unable to enumerate USB device on port 3
Jan 11 16:00:51 mailq kernel: [  349.429008] usb 1-4: new high-speed USB device number 7 using ehci_hcd
Jan 11 16:01:06 mailq kernel: [  364.575708] usb 1-4: device descriptor read/64, error -60
Jan 11 16:01:21 mailq kernel: [  379.770579] hub 1-0:1.0: unable to enumerate USB device on port 4
Jan 11 16:01:21 mailq kernel: [  380.178352] usb 3-2: new full-speed USB device number 7 using ohci_hcd
Jan 11 16:03:28 mailq kernel: [  506.351302] INFO: task khubd:124 blocked for more than 120 seconds.
Jan 11 16:03:28 mailq kernel: [  506.351638] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 11 16:03:28 mailq kernel: [  506.352025] khubd           D 00000000100a62b4     0   124      2 0x48000000000
Jan 11 16:03:28 mailq kernel: [  506.352068] Call Trace:
Jan 11 16:03:28 mailq kernel: [  506.352216]  [00000000100a5704] usb_kill_urb+0xac/0xd8 [usbcore]
Jan 11 16:03:28 mailq kernel: [  506.352301]  [00000000100a62b4] usb_start_wait_urb+0x60/0x94 [usbcore]
Jan 11 16:03:28 mailq kernel: [  506.352387]  [00000000100a64c4] usb_control_msg+0xc4/0xec [usbcore]
Jan 11 16:03:28 mailq kernel: [  506.352466]  [000000001009fd34] hub_port_init+0x244/0x748 [usbcore]
Jan 11 16:03:28 mailq kernel: [  506.352547]  [00000000100a1fe8] hub_thread+0x84c/0xee8 [usbcore]
Jan 11 16:03:28 mailq kernel: [  506.352593]  [0000000000475148] kthread+0x5c/0x70
Jan 11 16:03:28 mailq kernel: [  506.352635]  [000000000042a7d4] kernel_thread+0x30/0x48
Jan 11 16:03:28 mailq kernel: [  506.352668]  [00000000004753c0] kthreadd+0xa4/0xe0
Jan 11 16:05:28 mailq kernel: [  626.340648] INFO: task khubd:124 blocked for more than 120 seconds.
Jan 11 16:05:28 mailq kernel: [  626.341028] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Jan 11 16:05:28 mailq kernel: [  626.341449] khubd           D 00000000100a62b4     0   124      2 0x48000000000
Jan 11 16:05:28 mailq kernel: [  626.341492] Call Trace:
Jan 11 16:05:28 mailq kernel: [  626.341640]  [00000000100a5704] usb_kill_urb+0xac/0xd8 [usbcore]
Jan 11 16:05:28 mailq kernel: [  626.341725]  [00000000100a62b4] usb_start_wait_urb+0x60/0x94 [usbcore]
Jan 11 16:05:28 mailq kernel: [  626.341811]  [00000000100a64c4] usb_control_msg+0xc4/0xec [usbcore]
Jan 11 16:05:28 mailq kernel: [  626.341891]  [000000001009fd34] hub_port_init+0x244/0x748 [usbcore]
Jan 11 16:05:28 mailq kernel: [  626.341972]  [00000000100a1fe8] hub_thread+0x84c/0xee8 [usbcore]
Jan 11 16:05:28 mailq kernel: [  626.342019]  [0000000000475148] kthread+0x5c/0x70
Jan 11 16:05:28 mailq kernel: [  626.342061]  [000000000042a7d4] kernel_thread+0x30/0x48
Jan 11 16:05:28 mailq kernel: [  626.342094]  [00000000004753c0] kthreadd+0xa4/0xe0
Jan 11 16:05:56 mailq shutdown[2413]: shutting down for system reboot
Jan 11 16:05:57 mailq init: Switching to runlevel: 6

Reply to: