Bug#651382: linux-image-3.2.0-rc4-amd64: webcam stops working
Package: linux-2.6
Version: 3.2~rc4-1~experimental.1
Severity: normal
Dear Maintainer,
My webcam doesn't work any longer, neither vlc nor guvcview nor cheese can use
it any longer. The error message from cheese:
libv4l2: error turning on stream: Auf dem Gerät ist kein Speicherplatz mehr verfügbar (That means: no space left on device)
The webcam is connected via usb
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 006 Device 003: ID 0ac8:3343 Z-Star Microelectronics Corp. Sirius USB 2.0 Camera
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
linux-image 3.1 and before are OK.
Reinhard
-- Package-specific info:
** Version:
Linux version 3.2.0-rc4-amd64 (Debian 3.2~rc4-1~experimental.1) (ben@decadent.org.uk) (gcc version 4.6.2 (Debian 4.6.2-5) ) #1 SMP Sun Dec 4 18:38:24 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-rc4-amd64 root=UUID=9bb56ba6-3117-47d6-b07c-2cca477643e9 ro quiet cgroup_enable=memory pcie_aspm=force i915.i915_enable_rc6=1
** Not tainted
** Kernel log:
[ 10.678572] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input8
[ 10.678649] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[ 10.679350] fujitsu_laptop: BTNI: [0xf0101]
[ 10.683650] Registered led device: fujitsu::logolamp
[ 10.683798] fujitsu_laptop: driver 0.6.0 successfully loaded
[ 10.972699] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 10.972704] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 10.972851] iwl4965 0000:14:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.972864] iwl4965 0000:14:00.0: setting latency timer to 64
[ 10.972904] iwl4965 0000:14:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 11.011783] iwl4965 0000:14:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 11.011808] iwl4965 0000:14:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 11.011898] iwl4965 0000:14:00.0: irq 45 for MSI/MSI-X
[ 11.459532] iwl4965 0000:14:00.0: loaded firmware version 228.61.2.24
[ 11.459897] Registered led device: phy0-led
[ 11.518755] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa02000/0x0
[ 11.557495] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 11.970883] Linux media interface: v0.10
[ 11.991754] Linux video capture interface: v2.00
[ 12.022424] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 12.022581] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[ 12.022596] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 12.022690] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 12.022735] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 12.573043] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 12.886606] hda_codec: ALC262: SKU not ready 0x90970130
[ 12.887805] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 12.951590] uvcvideo: Found UVC 1.00 device Sirius USB2.0 Camera (0ac8:3343)
[ 12.955213] input: Sirius USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb6/6-4/6-4:1.0/input/input11
[ 12.955399] usbcore: registered new interface driver uvcvideo
[ 12.955403] USB Video Class driver (1.1.1)
[ 13.771312] cfg80211: World regulatory domain updated:
[ 13.771317] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.771323] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.771329] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.771334] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.771340] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.771345] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.771876] cfg80211: Calling CRDA for country: DE
[ 13.777617] cfg80211: Regulatory domain changed to country: DE
[ 13.777622] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.777628] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 13.777633] cfg80211: (5150000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 13.777639] cfg80211: (5250000 KHz - 5350000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 13.777643] cfg80211: (5470000 KHz - 5725000 KHz @ 40000 KHz), (N/A, 2698 mBm)
[ 13.894573] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 16.007613] Adding 4803396k swap on /dev/sda5. Priority:-1 extents:1 across:4803396k
[ 16.303161] EXT3-fs (sda2): using internal journal
[ 16.469733] loop: module loaded
[ 16.536976] device-mapper: uevent: version 1.0.3
[ 16.537078] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 16.608790] tun: Universal TUN/TAP device driver, 1.6
[ 16.608795] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 20.534645] Bridge firewalling registered
[ 20.542117] device tap0 entered promiscuous mode
[ 20.547739] ADDRCONF(NETDEV_UP): tap0: link is not ready
[ 20.549378] device tap1 entered promiscuous mode
[ 20.553007] ADDRCONF(NETDEV_UP): tap1: link is not ready
[ 20.558515] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 23.090626] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 23.102605] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 23.727010] fuse init (API version 7.17)
[ 25.393161] microcode: CPU0 sig=0x6fb, pf=0x80, revision=0xb6
[ 25.399210] microcode: CPU1 sig=0x6fb, pf=0x80, revision=0xb6
[ 25.405510] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 27.096516] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
[ 27.110149] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
[ 27.343443] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 28.879735] RPC: Registered named UNIX socket transport module.
[ 28.879741] RPC: Registered udp transport module.
[ 28.879744] RPC: Registered tcp transport module.
[ 28.879748] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 29.626498] FS-Cache: Loaded
[ 29.970289] FS-Cache: Netfs 'nfs' registered for caching
[ 30.547545] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 42.435000] lp: driver loaded but no devices found
[ 42.754152] ppdev: user-space parallel port driver
[ 47.290383] Bluetooth: Core ver 2.16
[ 47.290413] NET: Registered protocol family 31
[ 47.290417] Bluetooth: HCI device and connection manager initialized
[ 47.290423] Bluetooth: HCI socket layer initialized
[ 47.290426] Bluetooth: L2CAP socket layer initialized
[ 47.290436] Bluetooth: SCO socket layer initialized
[ 47.619443] Bluetooth: RFCOMM TTY layer initialized
[ 47.619451] Bluetooth: RFCOMM socket layer initialized
[ 47.619455] Bluetooth: RFCOMM ver 1.11
[ 48.045258] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 48.045264] Bluetooth: BNEP filters: protocol multicast
[ 54.524732] sky2 0000:04:00.0: eth0: enabling interface
[ 54.525720] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 54.771010] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 54.780162] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 54.855292] NFSD: starting 90-second grace period
[ 56.208070] sky2 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 56.209006] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 66.904053] eth0: no IPv6 routers present
[ 73.480614] postgres (2211): /proc/2211/oom_adj is deprecated, please use /proc/2211/oom_score_adj instead.
[ 263.357410] uvcvideo: Failed to submit URB 0 (-28).
[ 1224.562127] uvcvideo: Failed to submit URB 0 (-28).
[ 2340.036244] uvcvideo: Failed to submit URB 0 (-28).
** Model information
sys_vendor: FUJITSU SIEMENS
product_name: LIFEBOOK P8010
product_version:
chassis_vendor: FUJITSU SIEMENS
chassis_version: P8010
bios_vendor: FUJITSU // Phoenix Technologies Ltd.
bios_version: Version 1.08
board_vendor: FUJITSU
board_name: FJNB1E3
board_version: CP365184-01
** Loaded modules:
acpi_cpufreq
mperf
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
bnep
rfcomm
bluetooth
crc16
parport_pc
ppdev
lp
parport
snd_hrtimer
nfsd
nfs
lockd
fscache
auth_rpcgss
nfs_acl
sunrpc
uinput
binfmt_misc
microcode
fuse
ipt_MASQUERADE
iptable_nat
nf_nat
nf_conntrack_ipv4
nf_conntrack
nf_defrag_ipv4
ip_tables
x_tables
bridge
stp
vhost_net
macvtap
macvlan
tun
dm_mod
loop
kvm_intel
kvm
uvcvideo
snd_hda_codec_realtek
arc4
snd_hda_intel
videodev
media
joydev
v4l2_compat_ioctl32
snd_hda_codec
snd_hwdep
snd_pcm_oss
snd_mixer_oss
snd_pcm
snd_seq_midi
snd_rawmidi
snd_seq_midi_event
snd_seq
iwl4965
psmouse
iwl_legacy
mac80211
fujitsu_laptop
snd_timer
snd_seq_device
cfg80211
battery
processor
ac
iTCO_wdt
iTCO_vendor_support
snd
pcspkr
serio_raw
soundcore
snd_page_alloc
rfkill
pcmcia
power_supply
i2c_i801
evdev
yenta_socket
pcmcia_rsrc
pcmcia_core
ext3
jbd
mbcache
sr_mod
cdrom
sd_mod
crc_t10dif
ata_generic
i915
ata_piix
sdhci_pci
sdhci
mmc_core
ahci
libahci
drm_kms_helper
drm
libata
uhci_hcd
ehci_hcd
thermal
i2c_algo_bit
i2c_core
video
thermal_sys
button
sky2
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
Subsystem: Fujitsu Limited. Device [10cf:13f2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Limited. Device [10cf:13fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
Subsystem: Fujitsu Limited. Device [10cf:13fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device [10cf:1414]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device [10cf:1414]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Limited. Device [10cf:1415]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fc704800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
Subsystem: Fujitsu Limited. Device [10cf:142d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 46
Region 0: Memory at fc700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=07, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fc200000-fc2fffff
Prefetchable memory behind bridge: 00000000d0400000-00000000d06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=14, subordinate=1b, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fc300000-fc3fffff
Prefetchable memory behind bridge: 00000000d0200000-00000000d03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device [10cf:1414]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device [10cf:1414]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Limited. Device [10cf:1415]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 0: Memory at fc704c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=1c, subordinate=20, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fc400000-fc4fffff
Prefetchable memory behind bridge: 00000000d4000000-00000000d7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
Subsystem: Fujitsu Limited. Device [10cf:140e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Limited. Device [10cf:140f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1810 [size=16]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Fujitsu Limited. Device [10cf:1411]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at 18e0 [size=8]
Region 1: I/O ports at 18b4 [size=4]
Region 2: I/O ports at 18b8 [size=8]
Region 3: I/O ports at 18b0 [size=4]
Region 4: I/O ports at 18c0 [size=32]
Region 5: Memory at fc704000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
Subsystem: Fujitsu Limited. Device [10cf:1413]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
Kernel driver in use: i801_smbus
04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14)
Subsystem: Fujitsu Limited. Device [10cf:139a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at fc200000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
[virtual] Expansion ROM at d0400000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
14:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation PRO/Wireless 4965 AG or AGN [8086:1101]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fc300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwl4965
1c:03.0 CardBus bridge [0607]: O2 Micro, Inc. OZ711SP1 Memory CardBus Controller [1217:7136] (rev 01)
Subsystem: Fujitsu Limited. Device [10cf:143d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=1c, secondary=1d, subordinate=20, sec-latency=176
Memory window 0: d4000000-d7fff000 (prefetchable)
Memory window 1: d8000000-dbfff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003000-000030ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
1c:03.2 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD Controller [1217:7120] (rev 02) (prog-if 01)
Subsystem: Fujitsu Limited. Device [10cf:143d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fc400000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 006 Device 003: ID 0ac8:3343 Z-Star Microelectronics Corp. Sirius USB 2.0 Camera
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (101, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-rc4-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-3.2.0-rc4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.41
ii initramfs-tools [linux-initramfs-tool] 0.99
ii linux-base 3.4
ii module-init-tools 3.16-1
Versions of packages linux-image-3.2.0-rc4-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-rc4-amd64 suggests:
pn grub-pc 1.99-14
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-rc4-amd64 is related to:
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi 0.34
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-rc4-amd64/prerm/removing-running-kernel-3.2.0-rc4-amd64: true
linux-image-3.2.0-rc4-amd64/postinst/missing-firmware-3.2.0-rc4-amd64:
linux-image-3.2.0-rc4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-rc4-amd64/postinst/depmod-error-initrd-3.2.0-rc4-amd64: false
Reply to: