On Tue, 2011-11-01 at 10:08 +1000, 0807@035.pfr.ru wrote: > Package: linux-2.6 > Version: 2.6.32-38 > Severity: important > > Hi dear all, > > sometimes network dies, no ping, no data transfer. Interface (br0) is > up. Usually it happens at 6..8 A.M., but I cannot relate it with some > specific activity. > ifdown br0 && ifup br0 revives the connection. > > What I tried with no luck: > Disabling generic-segmentation-offload, now enabled > Updating kernel, was 2.6.32-31, now 2.6.32-38, both affected > Downloading new driver from Broadcom, now 3.116 It's unclear if this is a Xen issue or a tg3 issue (which would also impact native). If it is a Xen issue then this might plausibly be related to #638172. I posted some test kernels there which might be worth trying? I'm hoping to get this fixed for 2.6.32-40. Ian. > > RHEL 5.4 with kernel 2.6.18-164.el5xen works fine. > > In syslog I got this: > > Nov 1 06:34:11 sl03500008171 kernel: [422261.952118] > ------------[ cut here ]------------ > Nov 1 06:34:11 sl03500008171 kernel: [422261.952132] WARNING: > at /build/buildd-linux-2.6_2.6.32-38-amd64-bk66e4/linux-2.6-2.6.32/debian/build/source_amd64_xe > n/net/sched/sch_generic.c:261 dev_watchdog+0xe2/0x194() > Nov 1 06:34:11 sl03500008171 kernel: [422261.952137] Hardware name: > Tecal BH620 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952140] NETDEV WATCHDOG: > eth0 (tg3): transmit queue 0 timed out > Nov 1 06:34:11 sl03500008171 kernel: [422261.952143] Modules linked > in: tun nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack > xt_physdev ip6table_filter > ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables nfs > lockd fscache nfs_acl auth_rpcgss sunrpc cpufreq_userspace > cpufreq_conservative cpufreq > _powersave cpufreq_stats xen_evtchn xenfs fuse bridge stp mptctl loop > i2c_i801 i2c_core pcspkr shpchp pci_hotplug evdev button psmouse > serio_raw processor acp > i_processor ext4 mbcache jbd2 crc16 dm_mod sd_mod crc_t10dif usbhid > hid mptsas mptscsih mptbase ata_generic uhci_hcd ata_piix > scsi_transport_sas libata lpfc e > hci_hcd scsi_transport_fc tg3 scsi_tgt usbcore nls_base scsi_mod > libphy thermal thermal_sys [last unloaded: scsi_wait_scan] > Nov 1 06:34:11 sl03500008171 kernel: [422261.952246] Pid: 0, comm: > swapper Not tainted 2.6.32-5-xen-amd64 #1 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952249] Call Trace: > Nov 1 06:34:11 sl03500008171 kernel: [422261.952252] <IRQ> > [<ffffffff81272fb6>] ? dev_watchdog+0xe2/0x194 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952263] > [<ffffffff81272fb6>] ? dev_watchdog+0xe2/0x194 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952270] > [<ffffffff8104ef8c>] ? warn_slowpath_common+0x77/0xa3 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952277] > [<ffffffff810670a9>] ? run_posix_cpu_timers+0x25/0x6ea > Nov 1 06:34:11 sl03500008171 kernel: [422261.952282] > [<ffffffff81272ed4>] ? dev_watchdog+0x0/0x194 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952287] > [<ffffffff8104f014>] ? warn_slowpath_fmt+0x51/0x59 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952296] > [<ffffffff8130d64a>] ? _spin_unlock_irqrestore+0xd/0xe > Nov 1 06:34:11 sl03500008171 kernel: [422261.952300] > [<ffffffff8104b4aa>] ? try_to_wake_up+0x289/0x29b > Nov 1 06:34:11 sl03500008171 kernel: [422261.952307] > [<ffffffff8100ec5e>] ? xen_vcpuop_set_next_event+0x4c/0x60 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952313] > [<ffffffff81272ea8>] ? netif_tx_lock+0x3d/0x69 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952320] > [<ffffffff8125d912>] ? netdev_drivername+0x3b/0x40 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952325] > [<ffffffff81272fb6>] ? dev_watchdog+0xe2/0x194 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952330] > [<ffffffff8100ecf2>] ? check_events+0x12/0x20 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952335] > [<ffffffff8100ec12>] ? xen_vcpuop_set_next_event+0x0/0x60 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952341] > [<ffffffff81058898>] ? cascade+0x5f/0x77 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952348] > [<ffffffff8105b66f>] ? run_timer_softirq+0x1c9/0x268 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952354] > [<ffffffff81054d1b>] ? __do_softirq+0xdd/0x1a6 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952360] > [<ffffffff81012cac>] ? call_softirq+0x1c/0x30 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952365] > [<ffffffff8101422b>] ? do_softirq+0x3f/0x7c > Nov 1 06:34:11 sl03500008171 kernel: [422261.952370] > [<ffffffff81054b8b>] ? irq_exit+0x36/0x76 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952377] > [<ffffffff811f28a5>] ? xen_evtchn_do_upcall+0x33/0x42 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952382] > [<ffffffff81012cfe>] ? xen_do_hypervisor_callback+0x1e/0x30 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952385] <EOI> > [<ffffffff810093aa>] ? hypercall_page+0x3aa/0x1001 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952394] > [<ffffffff810093aa>] ? hypercall_page+0x3aa/0x1001 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952399] > [<ffffffff8100ec12>] ? xen_vcpuop_set_next_event+0x0/0x60 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952404] > [<ffffffff8100e6b3>] ? xen_safe_halt+0xc/0x15 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952409] > [<ffffffff8100bfc7>] ? xen_idle+0x37/0x40 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952413] > [<ffffffff81010e97>] ? cpu_idle+0xa2/0xda > Nov 1 06:34:11 sl03500008171 kernel: [422261.952418] > [<ffffffff8100ec99>] ? xen_irq_enable_direct_end+0x0/0x7 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952423] > [<ffffffff81301ec8>] ? cpu_bringup+0x6d/0x72 > Nov 1 06:34:11 sl03500008171 kernel: [422261.952427] ---[ end trace > 5bed13ead60bc146 ]--- > Nov 1 06:34:11 sl03500008171 kernel: [422261.952431] tg3 > 0000:02:04.0: eth0: transmit timed out, resetting > Nov 1 06:34:11 sl03500008171 kernel: [422261.952495] tg3 > 0000:02:04.0: eth0: DEBUG: MAC_TX_STATUS[00000008] > MAC_RX_STATUS[00000000] > Nov 1 06:34:11 sl03500008171 kernel: [422261.952556] tg3 > 0000:02:04.0: eth0: DEBUG: RDMAC_STATUS[00000000] > WDMAC_STATUS[00000000] > Nov 1 06:34:11 sl03500008171 kernel: [422262.053214] tg3 > 0000:02:04.0: tg3_stop_block timed out, ofs=1400 enable_bit=2 > Nov 1 06:34:11 sl03500008171 kernel: [422262.069016] tg3 > 0000:02:04.0: eth0: Link is down > Nov 1 06:34:11 sl03500008171 kernel: [422262.103697] br0: port > 1(eth0) entering disabled state > > My blade chassis reports this before accident (this time, not sure > about previous times): > > 2011/11/01 Tue 06:30:48 Watchdog 2 (Watchdog2) > Timer expired,interrupt type:none,timer use:OS Load > Asserted > 2011/11/01 Tue 06:24:55 Watchdog 2 (Watchdog2) > Timer expired,interrupt type:none,timer use:OS Load > Deasserted > > On screen I got this (previous accident, not this time): > > http://dl.dropbox.com/u/13410057/559.jpeg > > What additional information should I provide? > > Thanks. > > -- Package-specific info: > ** Version: > Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-38) > (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon > Oct 3 07:53:54 UTC 2011 > > ** Command line: > placeholder root=UUID=b31ead5b-d27c-4265-880a-b88d154318da ro quiet > > ** Not tainted > > ** Kernel log: > [ 86.471724] device vif6.0 entered promiscuous mode > [ 86.475503] br0: port 8(vif6.0) entering forwarding state > [ 86.489545] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 86.489549] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 86.489551] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 86.492548] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 86.492553] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 86.492557] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 86.492560] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 87.282468] blkback: ring-ref 8, event-channel 5, protocol 1 > (x86_64-abi) > [ 87.282537] alloc irq_desc for 4251 on node -1 > [ 87.282540] alloc kstat_irqs on node -1 > [ 87.308074] alloc irq_desc for 4250 on node -1 > [ 87.308077] alloc kstat_irqs on node -1 > [ 87.352606] tap4.0: no IPv6 routers present > [ 87.412021] vif4.0: no IPv6 routers present > [ 90.559361] br0: port 4(tap4.0) entering disabled state > [ 90.593611] device tap4.0 left promiscuous mode > [ 90.593615] br0: port 4(tap4.0) entering disabled state > [ 91.937206] blkback: ring-ref 8, event-channel 5, protocol 1 > (x86_64-abi) > [ 91.937269] alloc irq_desc for 4249 on node -1 > [ 91.937272] alloc kstat_irqs on node -1 > [ 91.970082] alloc irq_desc for 4248 on node -1 > [ 91.970085] alloc kstat_irqs on node -1 > [ 92.215944] vif5.0: no IPv6 routers present > [ 92.392004] tap5.0: no IPv6 routers present > [ 96.607910] vif6.0: no IPv6 routers present > [ 96.806989] alloc irq_desc for 4247 on node -1 > [ 96.806993] alloc kstat_irqs on node -1 > [ 97.020442] tap6.0: no IPv6 routers present > [ 97.089251] device tap7.0 entered promiscuous mode > [ 97.089271] br0: port 4(tap7.0) entering forwarding state > [ 97.348002] alloc irq_desc for 4246 on node -1 > [ 97.348007] alloc kstat_irqs on node -1 > [ 97.617025] device vif7.0 entered promiscuous mode > [ 97.622033] br0: port 9(vif7.0) entering forwarding state > [ 97.642792] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 97.642795] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 97.642798] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 97.642801] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 97.646369] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 97.646376] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 97.646380] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 97.646385] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 97.646389] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 98.456575] br0: port 6(tap5.0) entering disabled state > [ 98.490082] device tap5.0 left promiscuous mode > [ 98.490088] br0: port 6(tap5.0) entering disabled state > [ 100.398555] alloc irq_desc for 4245 on node -1 > [ 100.398558] alloc kstat_irqs on node -1 > [ 101.397731] blkback: ring-ref 770, event-channel 6, protocol 1 > (x86_64-abi) > [ 101.397770] alloc irq_desc for 4244 on node -1 > [ 101.397773] alloc kstat_irqs on node -1 > [ 107.635876] tap7.0: no IPv6 routers present > [ 108.303853] vif7.0: no IPv6 routers present > [ 108.961493] alloc irq_desc for 4243 on node -1 > [ 108.961498] alloc kstat_irqs on node -1 > [ 109.132018] device tap8.0 entered promiscuous mode > [ 109.132040] br0: port 6(tap8.0) entering forwarding state > [ 109.349958] alloc irq_desc for 4242 on node -1 > [ 109.349963] alloc kstat_irqs on node -1 > [ 109.399839] device vif8.0 entered promiscuous mode > [ 109.403956] br0: port 10(vif8.0) entering forwarding state > [ 109.419916] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 109.419920] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 109.419923] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 109.419926] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 109.419928] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 109.423215] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 109.423220] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 109.423226] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 109.423230] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 109.423234] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 109.423238] physdev match: using --physdev-out in the OUTPUT, > FORWARD and POSTROUTING chains for non-bridged traffic is not > supported anymore. > [ 114.663367] br0: port 3(tap6.0) entering disabled state > [ 114.693880] device tap6.0 left promiscuous mode > [ 114.693885] br0: port 3(tap6.0) entering disabled state > [ 116.125312] blkback: ring-ref 16383, event-channel 7, protocol 1 > (unspecified, assuming native) > [ 116.125367] alloc irq_desc for 4241 on node -1 > [ 116.125369] alloc kstat_irqs on node -1 > [ 117.214966] br0: port 4(tap7.0) entering disabled state > [ 117.237478] device tap7.0 left promiscuous mode > [ 117.237481] br0: port 4(tap7.0) entering disabled state > [ 118.676093] blkback: ring-ref 8, event-channel 5, protocol 1 > (x86_64-abi) > [ 118.676167] alloc irq_desc for 4240 on node -1 > [ 118.676170] alloc kstat_irqs on node -1 > [ 120.007399] alloc irq_desc for 4239 on node -1 > [ 120.007404] alloc kstat_irqs on node -1 > [ 120.048762] tap8.0: no IPv6 routers present > [ 120.375751] vif8.0: no IPv6 routers present > [ 129.698252] alloc irq_desc for 4238 on node -1 > [ 129.698259] alloc kstat_irqs on node -1 > [ 133.342882] br0: port 6(tap8.0) entering disabled state > [ 133.373175] device tap8.0 left promiscuous mode > [ 133.373179] br0: port 6(tap8.0) entering disabled state > [ 141.817516] blkback: ring-ref 8, event-channel 5, protocol 1 > (x86_64-abi) > [ 141.817581] alloc irq_desc for 4237 on node -1 > [ 141.817584] alloc kstat_irqs on node -1 > [ 159.559217] alloc irq_desc for 4236 on node -1 > [ 159.559222] alloc kstat_irqs on node -1 > > ** Model information > sys_vendor: Huawei Technologies Co., Ltd. > product_name: Tecal BH620 > product_version: V100R001 > chassis_vendor: Huawei Technologies Co., Ltd. > chassis_version: empty > bios_vendor: American Megatrends Inc. > bios_version: CTSAV029 > board_vendor: Huawei Technologies Co., Ltd. > board_name: BC01NTSA > board_version: V100R001 > > ** Loaded modules: > Module Size Used by > tun 10908 0 > nf_conntrack_ipv4 9833 6 > nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 > xt_state 1303 6 > nf_conntrack 46519 2 nf_conntrack_ipv4,xt_state > xt_physdev 1508 12 > ip6table_filter 2384 0 > ip6_tables 15107 1 ip6table_filter > iptable_filter 2258 1 > ip_tables 13915 1 iptable_filter > ebtable_nat 1588 0 > ebtables 13933 1 ebtable_nat > x_tables 12845 5 > xt_state,xt_physdev,ip6_tables,ip_tables,ebtables > nfs 241226 1 > lockd 57619 1 nfs > fscache 29834 1 nfs > nfs_acl 2031 1 nfs > auth_rpcgss 33508 1 nfs > sunrpc 161573 10 nfs,lockd,nfs_acl,auth_rpcgss > cpufreq_userspace 1992 0 > cpufreq_conservative 5162 0 > cpufreq_powersave 902 0 > cpufreq_stats 2740 0 > xen_evtchn 4339 7 > xenfs 9600 1 > fuse 50940 1 > bridge 39678 0 > stp 1440 1 bridge > mptctl 20982 0 > loop 11799 12 > i2c_i801 7830 0 > shpchp 26264 0 > i2c_core 15819 1 i2c_i801 > pci_hotplug 21587 1 shpchp > pcspkr 1699 0 > evdev 7352 2 > psmouse 49937 0 > serio_raw 3752 0 > button 4650 0 > processor 35941 0 > acpi_processor 5087 1 processor,[permanent] > ext4 288350 2 > mbcache 5050 1 ext4 > jbd2 67015 1 ext4 > crc16 1319 1 ext4 > dm_mod 53898 0 > sd_mod 29905 4 > crc_t10dif 1276 1 sd_mod > usbhid 33276 0 > hid 63257 1 usbhid > ata_generic 3239 0 > ata_piix 21124 0 > mptsas 29188 3 > uhci_hcd 18521 0 > mptscsih 16360 1 mptsas > lpfc 361456 0 > ehci_hcd 32065 0 > libata 133760 2 ata_generic,ata_piix > scsi_transport_fc 35355 1 lpfc > mptbase 48382 3 mptctl,mptsas,mptscsih > scsi_tgt 8482 1 scsi_transport_fc > usbcore 122674 4 usbhid,uhci_hcd,ehci_hcd > scsi_transport_sas 19865 1 mptsas > tg3 104366 0 > nls_base 6377 1 usbcore > scsi_mod 126517 9 > mptctl,sd_mod,mptsas,mptscsih,lpfc,libata,scsi_transport_fc,scsi_tgt,scsi_transport_sas > libphy 14038 1 tg3 > thermal 11674 0 > thermal_sys 11942 2 processor,thermal > > ** Network interface configuration: > auto lo > iface lo inet loopback > > iface eth0 inet manual > > auto br0 > iface br0 inet static > address 10.35.0.171 > netmask 255.255.255.0 > network 10.35.0.0 > broadcast 10.35.0.255 > gateway 10.35.0.254 > dns-nameservers 10.35.0.2 10.35.0.7 > dns-search opfr.local > bridge_ports eth0 > bridge_stp off > bridge_fd 0 > > ** Network status: > *** IP interfaces and addresses: > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP > qlen 1000 > link/ether 28:6e:d4:f1:6f:47 brd ff:ff:ff:ff:ff:ff > inet6 fe80::2a6e:d4ff:fef1:6f47/64 scope link > valid_lft forever preferred_lft forever > 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen > 1000 > link/ether 28:6e:d4:f1:6f:48 brd ff:ff:ff:ff:ff:ff > 4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state > UNKNOWN > link/ether 28:6e:d4:f1:6f:47 brd ff:ff:ff:ff:ff:ff > inet 10.35.0.171/24 brd 10.35.0.255 scope global br0 > inet6 fe80::2a6e:d4ff:fef1:6f47/64 scope link > valid_lft forever preferred_lft forever > 8: vif3.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc > pfifo_fast state UNKNOWN qlen 32 > link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff > inet6 fe80::fcff:ffff:feff:ffff/64 scope link > valid_lft forever preferred_lft forever > 10: vif4.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc > pfifo_fast state UNKNOWN qlen 32 > link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff > inet6 fe80::fcff:ffff:feff:ffff/64 scope link > valid_lft forever preferred_lft forever > 13: vif5.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc > pfifo_fast state UNKNOWN qlen 32 > link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff > inet6 fe80::fcff:ffff:feff:ffff/64 scope link > valid_lft forever preferred_lft forever > 15: vif6.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc > pfifo_fast state UNKNOWN qlen 32 > link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff > inet6 fe80::fcff:ffff:feff:ffff/64 scope link > valid_lft forever preferred_lft forever > 17: vif7.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc > pfifo_fast state UNKNOWN qlen 32 > link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff > inet6 fe80::fcff:ffff:feff:ffff/64 scope link > valid_lft forever preferred_lft forever > 19: vif8.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc > pfifo_fast state UNKNOWN qlen 32 > link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff > inet6 fe80::fcff:ffff:feff:ffff/64 scope link > valid_lft forever preferred_lft forever > > *** Device statistics: > Inter-| Receive | > Transmit > face |bytes packets errs drop fifo frame compressed multicast| > bytes packets errs drop fifo colls carrier compressed > lo: 1767 27 0 0 0 0 0 0 > 1767 27 0 0 0 0 0 0 > eth0:33377051 178682 0 0 0 0 0 5322 > 36225282 161684 0 0 0 0 0 0 > eth1: 0 0 0 0 0 0 0 0 > 0 0 0 0 0 0 0 0 > br0:19085489 139147 0 0 0 0 0 13574 > 28755411 117349 0 0 0 0 0 0 > vif3.0: 461717 2902 0 0 0 0 0 0 > 3806371 16214 0 54 0 0 0 0 > vif4.0: 129341 2026 0 0 0 0 0 0 > 1450109 14711 0 62 0 0 0 0 > vif5.0: 5544 106 0 0 0 0 0 0 > 1128887 13544 0 115 0 0 0 0 > vif6.0: 204248 772 0 0 0 0 0 0 > 1287971 13973 0 196 0 0 0 0 > vif7.0: 5537973 40324 0 0 0 0 0 0 > 9169799 48659 0 193 0 0 0 0 > vif8.0: 426457 1917 0 0 0 0 0 0 > 1396936 15296 0 166 0 0 0 0 > > *** Protocol statistics: > Ip: > 131908 total packets received > 0 forwarded > 862 with unknown protocol > 0 incoming packets discarded > 127914 incoming packets delivered > 117205 requests sent out > Icmp: > 30 ICMP messages received > 0 input ICMP message failed. > ICMP input histogram: > redirects: 1 > echo requests: 29 > 31 ICMP messages sent > 0 ICMP messages failed > ICMP output histogram: > destination unreachable: 2 > echo replies: 29 > IcmpMsg: > InType5: 1 > InType8: 29 > OutType0: 29 > OutType3: 2 > Tcp: > 38 active connections openings > 149 passive connection openings > 36 failed connection attempts > 29 connection resets received > 3 connections established > 124929 segments received > 116710 segments send out > 1 segments retransmited > 0 bad segments received. > 0 resets sent > Udp: > 475 packets received > 2 packets to unknown port received. > 0 packet receive errors > 475 packets sent > UdpLite: > TcpExt: > 2 TCP sockets finished time wait in fast timer > 251 delayed acks sent > 200 packets directly queued to recvmsg prequeue. > 2 bytes directly received in process context from prequeue > 110412 packet headers predicted > 772 acknowledgments not containing data payload received > 113525 predicted acknowledgments > 1 other TCP timeouts > 1 DSACKs sent for old packets > IpExt: > InMcastPkts: 34 > InBcastPkts: 3306 > InOctets: 18737951 > OutOctets: 27108480 > InMcastOctets: 1088 > InBcastOctets: 392954 > > > ** PCI devices: > 00:00.0 Host bridge [0600]: Intel Corporation 5500 I/O Hub to ESI Port > [8086:3403] (rev 22) > Subsystem: Device [19e5:2009] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ > 64bit- > Address: 00000000 Data: 0000 > Masking: 00000000 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot-), MSI > 00 > DevCap: MaxPayload > 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag+ RBE+ > FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- > PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 > bytes, MaxReadReq 128 bytes > DevSta: CorrErr- > UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, > Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Surprise+ > LLActRep+ BwNot+ > LnkCtl: ASPM > Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > RootCtl: ErrCorrectable- > ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- > PMEPending- > DevCap2: Completion Timeout: Range > BCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 260ms to > 900ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 2.5GT/s, > EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: > Unknown, EnterModifiedCompliance- ComplianceSOS- > Compliance > De-emphasis: -3.5dB > LnkSta2: Current De-emphasis Level: > -6dB > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UEMsk: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UESvrt: DLP+ SDES+ > TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- > ACSViol- > CESta: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error > Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [150 v1] Access Control Services > ACSCap: SrcValid+ > TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans- > ACSCtl: SrcValid- > TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- > Capabilities: [160 v0] Vendor Specific Information: > ID=0002 Rev=0 Len=00c <?> > > 00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI > Express Root Port 1 [8086:3408] (rev 22) (prog-if 00 [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 256 bytes > Bus: primary=00, secondary=01, subordinate=02, > sec-latency=0 > Memory behind bridge: fb900000-fb9fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- > FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- > DiscTmrSERREn- > Capabilities: [40] Subsystem: Device [19e5:2009] > Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ > 64bit- > Address: fee20000 Data: 40a0 > Masking: 00000003 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot+), MSI > 00 > DevCap: MaxPayload > 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag+ RBE+ > FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- > PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 > bytes, MaxReadReq 128 bytes > DevSta: CorrErr- > UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, > Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Surprise+ > LLActRep+ BwNot+ > LnkCtl: ASPM > Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > SltCap: AttnBtn- > PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #49, PowerLimit > 25.000W; Interlock- NoCompl- > SltCtl: Enable: > AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd > Off, PwrInd Off, Power- Interlock- > SltSta: Status: > AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- > PresDet+ LinkState+ > RootCtl: ErrCorrectable- > ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- > PMEPending- > DevCap2: Completion Timeout: Range > BCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 260ms to > 900ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, > EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: > Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance > De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: > -6dB > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UEMsk: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UESvrt: DLP+ SDES+ > TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- > ACSViol- > CESta: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error > Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [150 v1] Access Control Services > ACSCap: SrcValid+ > TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans- > ACSCtl: SrcValid- > TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- > Capabilities: [160 v0] Vendor Specific Information: > ID=0002 Rev=0 Len=00c <?> > Kernel driver in use: pcieport > > 00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI > Express Root Port 3 [8086:340a] (rev 22) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 256 bytes > Bus: primary=00, secondary=03, subordinate=03, > sec-latency=0 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: fba00000-fbcfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- > FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- > DiscTmrSERREn- > Capabilities: [40] Subsystem: Device [19e5:2009] > Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ > 64bit- > Address: fee20000 Data: 40a8 > Masking: 00000003 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot+), MSI > 00 > DevCap: MaxPayload > 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag+ RBE+ > FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- > PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 > bytes, MaxReadReq 128 bytes > DevSta: CorrErr- > UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, > Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Surprise+ > LLActRep+ BwNot+ > LnkCtl: ASPM > Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > SltCap: AttnBtn- > PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #51, PowerLimit > 25.000W; Interlock- NoCompl- > SltCtl: Enable: > AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd > Off, PwrInd Off, Power- Interlock- > SltSta: Status: > AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- > PresDet+ LinkState+ > RootCtl: ErrCorrectable- > ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- > PMEPending- > DevCap2: Completion Timeout: Range > BCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 260ms to > 900ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, > EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: > Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance > De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: > -6dB > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UEMsk: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UESvrt: DLP+ SDES+ > TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- > ACSViol- > CESta: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error > Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [150 v1] Access Control Services > ACSCap: SrcValid+ > TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans- > ACSCtl: SrcValid- > TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- > Capabilities: [160 v0] Vendor Specific Information: > ID=0002 Rev=0 Len=00c <?> > Kernel driver in use: pcieport > > 00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI > Express Root Port 7 [8086:340e] (rev 22) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 256 bytes > Bus: primary=00, secondary=04, subordinate=04, > sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: fbd00000-fbdfffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- > FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- > DiscTmrSERREn- > Capabilities: [40] Subsystem: Device [19e5:2009] > Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ > 64bit- > Address: fee20000 Data: 40b0 > Masking: 00000003 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot+), MSI > 00 > DevCap: MaxPayload > 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag+ RBE+ > FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- > PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 > bytes, MaxReadReq 128 bytes > DevSta: CorrErr- > UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, > Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Surprise+ > LLActRep+ BwNot+ > LnkCtl: ASPM > Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- > SltCap: AttnBtn- > PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #55, PowerLimit > 25.000W; Interlock- NoCompl- > SltCtl: Enable: > AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd > Off, PwrInd Off, Power- Interlock- > SltSta: Status: > AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- > PresDet+ LinkState+ > RootCtl: ErrCorrectable- > ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- > PMEPending- > DevCap2: Completion Timeout: Range > BCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 260ms to > 900ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, > EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: > Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance > De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: > -6dB > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UEMsk: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UESvrt: DLP+ SDES+ > TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- > ACSViol- > CESta: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error > Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [150 v1] Access Control Services > ACSCap: SrcValid+ > TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans- > ACSCtl: SrcValid- > TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- > Capabilities: [160 v0] Vendor Specific Information: > ID=0002 Rev=0 Len=00c <?> > Kernel driver in use: pcieport > > 00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI > Express Root Port 9 [8086:3410] (rev 22) (prog-if 00 [Normal decode]) > Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 256 bytes > Bus: primary=00, secondary=05, subordinate=05, > sec-latency=0 > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- > FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- > DiscTmrSERREn- > Capabilities: [40] Subsystem: Device [19e5:2009] > Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ > 64bit- > Address: fee20000 Data: 40b8 > Masking: 00000003 Pending: 00000000 > Capabilities: [90] Express (v2) Root Port (Slot+), MSI > 00 > DevCap: MaxPayload > 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag+ RBE+ > FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- > PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 > bytes, MaxReadReq 128 bytes > DevSta: CorrErr- > UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, > Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us > ClockPM- Surprise+ > LLActRep+ BwNot+ > LnkCtl: ASPM > Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > SltCap: AttnBtn- > PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- > Slot #57, PowerLimit > 25.000W; Interlock- NoCompl- > SltCtl: Enable: > AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd > Off, PwrInd Off, Power- Interlock- > SltSta: Status: > AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- > Changed: MRL- > PresDet+ LinkState- > RootCtl: ErrCorrectable- > ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- > PMEPending- > DevCap2: Completion Timeout: Range > BCD, TimeoutDis+ ARIFwd+ > DevCtl2: Completion Timeout: 260ms to > 900ms, TimeoutDis- ARIFwd- > LnkCtl2: Target Link Speed: 5GT/s, > EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: > Unknown, EnterModifiedCompliance- ComplianceSOS- > Compliance > De-emphasis: -3.5dB > LnkSta2: Current De-emphasis Level: > -6dB > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UEMsk: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UESvrt: DLP+ SDES+ > TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- > ACSViol- > CESta: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error > Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [150 v1] Access Control Services > ACSCap: SrcValid+ > TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans- > ACSCtl: SrcValid- > TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans- > Kernel driver in use: pcieport > > 00:13.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC > Interrupt Controller [8086:342d] (rev 22) (prog-if 20 [IO(X)-APIC]) > Subsystem: Device [00e5:0009] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Region 0: Memory at fec8a000 (32-bit, > non-prefetchable) [size=4K] > Capabilities: [6c] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- > DSel=0 DScale=0 PME- > > 00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System > Management Registers [8086:342e] (rev 22) (prog-if 00 [8259]) > Subsystem: Device [00e5:0009] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [40] Express (v2) Root Complex > Integrated Endpoint, MSI 00 > DevCap: MaxPayload > 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ > FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- > PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 > bytes, MaxReadReq 128 bytes > DevSta: CorrErr- > UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, > Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited > ClockPM- Surprise+ > LLActRep+ BwNot+ > LnkCtl: ASPM > Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not > Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to > 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, > EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: > Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance > De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: > -6dB > > 00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and > Scratch Pad Registers [8086:3422] (rev 22) (prog-if 00 [8259]) > Subsystem: Device [00e5:0009] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [40] Express (v2) Root Complex > Integrated Endpoint, MSI 00 > DevCap: MaxPayload > 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ > FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- > PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 > bytes, MaxReadReq 128 bytes > DevSta: CorrErr- > UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, > Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited > ClockPM- Surprise+ > LLActRep+ BwNot+ > LnkCtl: ASPM > Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not > Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to > 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, > EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: > Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance > De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: > -6dB > > 00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control > Status and RAS Registers [8086:3423] (rev 22) (prog-if 00 [8259]) > Subsystem: Device [00e5:0009] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Capabilities: [40] Express (v2) Root Complex > Integrated Endpoint, MSI 00 > DevCap: MaxPayload > 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE+ > FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- > PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 > bytes, MaxReadReq 128 bytes > DevSta: CorrErr- > UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- > LnkCap: Port #0, > Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited > ClockPM- Surprise+ > LLActRep+ BwNot+ > LnkCtl: ASPM > Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > DevCap2: Completion Timeout: Not > Supported, TimeoutDis- > DevCtl2: Completion Timeout: 50us to > 50ms, TimeoutDis- > LnkCtl2: Target Link Speed: 2.5GT/s, > EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB > Transmit Margin: > Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- > Compliance > De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: > -6dB > > 00:14.3 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Throttle > Registers [8086:3438] (rev 22) (prog-if 00 [8259]) > Subsystem: Device [00e5:0009] > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 > Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI]) > Subsystem: Device [19e5:2009] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 4: I/O ports at bc00 [size=32] > Capabilities: [50] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: uhci_hcd > > 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 > Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI]) > Subsystem: Intel Corporation 82801JI (ICH10 Family) > USB2 EHCI Controller #2 [8086:3a3c] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at fb8fe000 (32-bit, > non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Capabilities: [98] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ehci_hcd > > 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 > Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI]) > Subsystem: Device [19e5:2009] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 4: I/O ports at b480 [size=32] > Capabilities: [50] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: uhci_hcd > > 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 > Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI]) > Subsystem: Device [19e5:2009] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 4: I/O ports at b800 [size=32] > Capabilities: [50] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: uhci_hcd > > 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 > Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI]) > Subsystem: Device [19e5:2009] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 4: I/O ports at b880 [size=32] > Capabilities: [50] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: uhci_hcd > > 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 > Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI]) > Subsystem: Intel Corporation 82801JI (ICH10 Family) > USB2 EHCI Controller #1 [8086:3a3a] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at fb8fc000 (32-bit, > non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Capabilities: [98] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ehci_hcd > > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge > [8086:244e] (rev 90) (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=06, subordinate=06, > sec-latency=32 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: fbe00000-fbefffff > Prefetchable memory behind bridge: > 00000000f4000000-00000000f7ffffff > Secondary status: 66MHz- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- > FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- > DiscTmrSERREn- > Capabilities: [50] Subsystem: Device [19e5:2009] > > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC > Interface Controller [8086:3a18] > Subsystem: Device [19e5:2009] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information: Len=0c > <?> > > 00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) > 4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP > SecO PriP PriO]) > Subsystem: Device [19e5:2009] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 0: I/O ports at a400 [size=8] > Region 1: I/O ports at a080 [size=4] > Region 2: I/O ports at a000 [size=8] > Region 3: I/O ports at 9c00 [size=4] > Region 4: I/O ports at 9880 [size=16] > Region 5: I/O ports at 9800 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [b0] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ata_piix > > 00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus > Controller [8086:3a30] > Subsystem: Device [19e5:2009] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at fb8fa000 (64-bit, > non-prefetchable) [size=256] > Region 4: I/O ports at 0400 [size=32] > Kernel driver in use: i801_smbus > > 00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) > 2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO > PriO]) > Subsystem: Device [19e5:2009] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 0: I/O ports at b400 [size=8] > Region 1: I/O ports at b080 [size=4] > Region 2: I/O ports at b000 [size=8] > Region 3: I/O ports at ac00 [size=4] > Region 4: I/O ports at a880 [size=16] > Region 5: I/O ports at a800 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst+ PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [b0] PCI Advanced Features > AFCap: TP+ FLR+ > AFCtrl: FLR- > AFStatus: TP- > Kernel driver in use: ata_piix > > 01:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge > [1166:0103] (rev b5) (prog-if 00 [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 256 bytes > Bus: primary=01, secondary=02, subordinate=02, > sec-latency=64 > Memory behind bridge: fb900000-fb9fffff > Secondary status: 66MHz- FastB2B- ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- > FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- > DiscTmrSERREn- > Capabilities: [60] Express (v1) PCI/PCI-X Bridge, MSI > 00 > DevCap: MaxPayload > 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us > ExtTag+ AttnBtn- > AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- > PhantFunc- AuxPwr- NoSnoop- BrConfRtry- > MaxPayload 128 > bytes, MaxReadReq 128 bytes > DevSta: CorrErr- > UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #0, > Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <4us > ClockPM- Surprise- > LLActRep- BwNot- > LnkCtl: ASPM > Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- > Capabilities: [90] PCI-X bridge device > Secondary Status: 64bit+ 133MHz+ SCD- > USC- SCO- SRD- Freq=133MHz > Status: Dev=01:00.0 64bit- 133MHz- > SCD- USC- SCO- SRD- > Upstream: Capacity=0 > CommitmentLimit=0 > Downstream: Capacity=0 > CommitmentLimit=0 > Capabilities: [b0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP+ SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UEMsk: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UESvrt: DLP+ SDES- > TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- > ACSViol- > CESta: RxErr+ BadTLP+ > BadDLLP- Rollover+ Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > AERCap: First Error > Pointer: 04, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [14c v1] Power Budgeting <?> > > 02:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme > BCM5715S Gigabit Ethernet [14e4:1679] (rev a3) > Subsystem: Broadcom Corporation NetXtreme BCM5715S > Gigabit Ethernet [14e4:1679] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (16000ns min), Cache Line Size: 256 bytes > Interrupt: pin A routed to IRQ 4263 > Region 0: Memory at fb9c0000 (64-bit, > non-prefetchable) [size=64K] > Region 2: Memory at fb9b0000 (64-bit, > non-prefetchable) [size=64K] > Expansion ROM at <ignored> [disabled] > Capabilities: [40] PCI-X non-bridge device > Command: DPERE- ERO- RBC=512 OST=1 > Status: Dev=02:04.0 64bit+ 133MHz+ > SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- > 533MHz- > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable+ > DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > Product Name: Broadcom NetXtreme > Gigabit Fiber Controller > Read-only fields: > [PN] Part number: > BCM95715s > [EC] Engineering > changes: 106679-15 > [SN] Serial number: > 0123456789 > [MN] Manufacture ID: > 31 34 65 34 > [RV] Reserved: > checksum good, 30 byte(s) reserved > Read/write fields: > [YA] Asset tag: > XYZ01234567 > [RW] Read-write > area: 107 byte(s) free > End > Capabilities: [58] MSI: Enable+ Count=1/8 Maskable- > 64bit+ > Address: 00000000fee02000 Data: 4089 > Kernel driver in use: tg3 > > 02:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme > BCM5715S Gigabit Ethernet [14e4:1679] (rev a3) > Subsystem: Broadcom Corporation NetXtreme BCM5715S > Gigabit Ethernet [14e4:1679] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (16000ns min), Cache Line Size: 256 bytes > Interrupt: pin B routed to IRQ 40 > Region 0: Memory at fb9f0000 (64-bit, > non-prefetchable) [size=64K] > Region 2: Memory at fb9e0000 (64-bit, > non-prefetchable) [size=64K] > Capabilities: [40] PCI-X non-bridge device > Command: DPERE- ERO+ RBC=512 OST=1 > Status: Dev=02:04.1 64bit+ 133MHz+ > SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- > 533MHz- > Capabilities: [48] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- > DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > Product Name: Broadcom NetXtreme > Gigabit Fiber Controller > Read-only fields: > [PN] Part number: > BCM95715s > [EC] Engineering > changes: 106679-15 > [SN] Serial number: > 0123456789 > [MN] Manufacture ID: > 31 34 65 34 > [RV] Reserved: > checksum good, 30 byte(s) reserved > Read/write fields: > [YA] Asset tag: > XYZ01234567 > [RW] Read-write > area: 107 byte(s) free > End > Capabilities: [58] MSI: Enable- Count=1/8 Maskable- > 64bit+ > Address: 0d954c1686670824 Data: 0b80 > Kernel driver in use: tg3 > > 03:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic > SAS1064ET PCI-Express Fusion-MPT SAS [1000:0056] (rev 10) > Subsystem: Device [19e5:d201] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 256 bytes > Interrupt: pin A routed to IRQ 24 > Region 0: I/O ports at c000 [size=256] > Region 1: Memory at fbcfc000 (64-bit, > non-prefetchable) [size=16K] > Region 3: Memory at fbce0000 (64-bit, > non-prefetchable) [size=64K] > Expansion ROM at fba00000 [disabled] [size=2M] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ > AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [68] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload > 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag+ AttnBtn- > AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- > PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 > bytes, MaxReadReq 512 bytes > DevSta: CorrErr- > UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- > LnkCap: Port #0, > Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us > ClockPM- Surprise- > LLActRep- BwNot- > LnkCtl: ASPM > Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- > Capabilities: [98] MSI: Enable- Count=1/1 Maskable- > 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [b0] MSI-X: Enable- Count=1 Masked- > Vector table: BAR=1 offset=00002000 > PBA: BAR=1 offset=00003000 > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ > ACSViol- > UEMsk: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UESvrt: DLP+ SDES- > TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- > ACSViol- > CESta: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > AERCap: First Error > Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- > Kernel driver in use: mptsas > > 04:00.0 Fibre Channel [0c04]: Emulex Corporation Zephyr-X LightPulse > Fibre Channel Host Adapter [10df:fe00] (rev 02) > Subsystem: Emulex Corporation Device [10df:fe25] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 256 bytes > Interrupt: pin A routed to IRQ 30 > Region 0: Memory at fbdfd000 (64-bit, > non-prefetchable) [size=4K] > Region 2: Memory at fbdfe800 (64-bit, > non-prefetchable) [size=256] > Region 4: I/O ports at d400 [size=256] > Expansion ROM at fbd40000 [disabled] [size=256K] > Capabilities: [58] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [60] MSI: Enable- Count=1/8 Maskable- > 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Vital Product Data > Product Name: FC3532 Zephyr HBA > product > Read-only fields: > [PN] Part number: > FC3532 > [V1] Vendor > specific: FC3532 4G FC Mezzanine Card > [V2] Vendor > specific: FC3532 > [V3] Vendor > specific: T2:E1,E8,T3:E1,E2,E3,E5,E6,E7,T6:E1,T7:E1,TB:E1 > [V4] Vendor > specific: 0 > [V5] Vendor > specific: LPe1102 > [RV] Reserved: > checksum good, 108 byte(s) reserved > End > Capabilities: [44] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload > 2048 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us > ExtTag+ AttnBtn- > AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- > PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 > bytes, MaxReadReq 512 bytes > DevSta: CorrErr- > UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- > LnkCap: Port #0, > Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 unlimited > ClockPM- Surprise- > LLActRep- BwNot- > LnkCtl: ASPM > Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ > ACSViol- > UEMsk: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UESvrt: DLP+ SDES- > TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- > ACSViol- > CESta: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > AERCap: First Error > Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [12c v1] Power Budgeting <?> > Kernel driver in use: lpfc > > 04:00.1 Fibre Channel [0c04]: Emulex Corporation Zephyr-X LightPulse > Fibre Channel Host Adapter [10df:fe00] (rev 02) > Subsystem: Emulex Corporation Device [10df:fe25] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast > >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 256 bytes > Interrupt: pin B routed to IRQ 37 > Region 0: Memory at fbdff000 (64-bit, > non-prefetchable) [size=4K] > Region 2: Memory at fbdfec00 (64-bit, > non-prefetchable) [size=256] > Region 4: I/O ports at d800 [size=256] > Expansion ROM at fbd80000 [disabled] [size=256K] > Capabilities: [58] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- > AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- > DSel=0 DScale=0 PME- > Capabilities: [60] MSI: Enable- Count=1/8 Maskable- > 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Vital Product Data > Product Name: FC3532 Zephyr HBA > product > Read-only fields: > [PN] Part number: > FC3532 > [V1] Vendor > specific: FC3532 4G FC Mezzanine Card > [V2] Vendor > specific: FC3532 > [V3] Vendor > specific: T2:E1,E8,T3:E1,E2,E3,E5,E6,E7,T6:E1,T7:E1,TB:E1 > [V4] Vendor > specific: 1 > [V5] Vendor > specific: LPe1102 > [RV] Reserved: > checksum good, 108 byte(s) reserved > End > Capabilities: [44] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload > 2048 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us > ExtTag+ AttnBtn- > AttnInd- PwrInd- RBE- FLReset- > DevCtl: Report > errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- > PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 > bytes, MaxReadReq 512 bytes > DevSta: CorrErr- > UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend- > LnkCap: Port #0, > Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 unlimited > ClockPM- Surprise- > LLActRep- BwNot- > LnkCtl: ASPM > Disabled; RCB 64 bytes Disabled- Retrain- CommClk- > ExtSynch- ClockPM- > AutWidDis- BWInt- AutBWInt- > LnkSta: Speed > 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ > ACSViol- > UEMsk: DLP- SDES- > TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- > ACSViol- > UESvrt: DLP+ SDES- > TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- > ACSViol- > CESta: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > CEMsk: RxErr- BadTLP- > BadDLLP- Rollover- Timeout- NonFatalErr- > AERCap: First Error > Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- > Capabilities: [12c v1] Power Budgeting <?> > Kernel driver in use: lpfc > > 06:00.0 VGA compatible controller [0300]: XGI Technology Inc. (eXtreme > Graphics Innovation) Z9s/Z9m (XG21 core) [18ca:0021] (prog-if 00 [VGA > controller]) > Subsystem: Device [19e5:d003] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > BIST result: 00 > Region 0: Memory at f4000000 (32-bit, prefetchable) > [size=64M] > Region 1: Memory at fbec0000 (32-bit, > non-prefetchable) [size=256K] > Region 2: I/O ports at ec00 [size=128] > Expansion ROM at <unassigned> [disabled] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ > AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- > DSel=0 DScale=0 PME- > > > ** Sound cards: > > -- System Information: > Debian Release: 6.0.3 > APT prefers stable > APT policy: (500, 'stable') > Architecture: amd64 (x86_64) > > Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/16 CPU cores) > Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/dash > > Versions of packages linux-image-2.6.32-5-xen-amd64 depends on: > ii debconf [debconf-2.0] 1.5.36.1 Debian configuration > management sy > ii initramfs-tools 0.98.8 tools for generating an > initramfs > ii linux-base 2.6.32-38 Linux image base package > ii module-init-tools 3.12-1 tools for managing Linux > kernel mo > > Versions of packages linux-image-2.6.32-5-xen-amd64 recommends: > ii firmware-linux-free 2.6.32-38 Binary firmware for > various driver > > Versions of packages linux-image-2.6.32-5-xen-amd64 suggests: > pn grub <none> (no description > available) > pn linux-doc-2.6.32 <none> (no description > available) > > Versions of packages linux-image-2.6.32-5-xen-amd64 is related to: > pn firmware-bnx2 <none> (no description > available) > pn firmware-bnx2x <none> (no description > available) > pn firmware-ipw2x00 <none> (no description > available) > pn firmware-ivtv <none> (no description > available) > pn firmware-iwlwifi <none> (no description > available) > pn firmware-linux <none> (no description > available) > ii firmware-linux-nonfree 0.28 Binary firmware for > various driver > pn firmware-qlogic <none> (no description > available) > pn firmware-ralink <none> (no description > available) > ii xen-hypervisor-4.0-amd64 [xen 4.0.1-2 The Xen Hypervisor on > AMD64 > > -- debconf information: > linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64: false > linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64: > linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64: true > linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64: -- Ian Campbell Alimony is like buying oats for a dead horse. -- Arthur Baer
Attachment:
signature.asc
Description: This is a digitally signed message part