Bug#647246: linux-image-2.6.32-5-xen-amd64: Network dies with "NETDEV WATCHDOG: eth0 (tg3): transmit queue 0 timed out"
Package: linux-2.6
Version: 2.6.32-38
Severity: important
Hi dear all,
sometimes network dies, no ping, no data transfer. Interface (br0) is up.
Usually it happens at 6..8 A.M., but I cannot relate it with some specific
activity.
ifdown br0 && ifup br0 revives the connection.
What I tried with no luck:
Disabling generic-segmentation-offload, now enabled
Updating kernel, was 2.6.32-31, now 2.6.32-38, both affected
Downloading new driver from Broadcom, now 3.116
RHEL 5.4 with kernel 2.6.18-164.el5xen works fine.
In syslog I got this:
Nov 1 06:34:11 sl03500008171 kernel: [422261.952118] ------------[
cut here ]------------
Nov 1 06:34:11 sl03500008171 kernel: [422261.952132] WARNING: at
/build/buildd-linux-2.6_2.6.32-38-amd64-bk66e4/linux-2.6-2.6.32/debian/build/source_amd64_xe
n/net/sched/sch_generic.c:261 dev_watchdog+0xe2/0x194()
Nov 1 06:34:11 sl03500008171 kernel: [422261.952137] Hardware name:
Tecal BH620
Nov 1 06:34:11 sl03500008171 kernel: [422261.952140] NETDEV WATCHDOG:
eth0 (tg3): transmit queue 0 timed out
Nov 1 06:34:11 sl03500008171 kernel: [422261.952143] Modules linked
in: tun nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_physdev
ip6table_filter
ip6_tables iptable_filter ip_tables ebtable_nat ebtables x_tables nfs
lockd fscache nfs_acl auth_rpcgss sunrpc cpufreq_userspace cpufreq_conservative
cpufreq
_powersave cpufreq_stats xen_evtchn xenfs fuse bridge stp mptctl loop i2c_i801
i2c_core pcspkr shpchp pci_hotplug evdev button psmouse serio_raw processor
acp
i_processor ext4 mbcache jbd2 crc16 dm_mod sd_mod crc_t10dif usbhid hid
mptsas mptscsih mptbase ata_generic uhci_hcd ata_piix scsi_transport_sas
libata lpfc e
hci_hcd scsi_transport_fc tg3 scsi_tgt usbcore nls_base scsi_mod libphy
thermal thermal_sys [last unloaded: scsi_wait_scan]
Nov 1 06:34:11 sl03500008171 kernel: [422261.952246] Pid: 0, comm:
swapper Not tainted 2.6.32-5-xen-amd64 #1
Nov 1 06:34:11 sl03500008171 kernel: [422261.952249] Call Trace:
Nov 1 06:34:11 sl03500008171 kernel: [422261.952252] <IRQ>
[<ffffffff81272fb6>] ? dev_watchdog+0xe2/0x194
Nov 1 06:34:11 sl03500008171 kernel: [422261.952263] [<ffffffff81272fb6>]
? dev_watchdog+0xe2/0x194
Nov 1 06:34:11 sl03500008171 kernel: [422261.952270] [<ffffffff8104ef8c>]
? warn_slowpath_common+0x77/0xa3
Nov 1 06:34:11 sl03500008171 kernel: [422261.952277] [<ffffffff810670a9>]
? run_posix_cpu_timers+0x25/0x6ea
Nov 1 06:34:11 sl03500008171 kernel: [422261.952282] [<ffffffff81272ed4>]
? dev_watchdog+0x0/0x194
Nov 1 06:34:11 sl03500008171 kernel: [422261.952287] [<ffffffff8104f014>]
? warn_slowpath_fmt+0x51/0x59
Nov 1 06:34:11 sl03500008171 kernel: [422261.952296] [<ffffffff8130d64a>]
? _spin_unlock_irqrestore+0xd/0xe
Nov 1 06:34:11 sl03500008171 kernel: [422261.952300] [<ffffffff8104b4aa>]
? try_to_wake_up+0x289/0x29b
Nov 1 06:34:11 sl03500008171 kernel: [422261.952307] [<ffffffff8100ec5e>]
? xen_vcpuop_set_next_event+0x4c/0x60
Nov 1 06:34:11 sl03500008171 kernel: [422261.952313] [<ffffffff81272ea8>]
? netif_tx_lock+0x3d/0x69
Nov 1 06:34:11 sl03500008171 kernel: [422261.952320] [<ffffffff8125d912>]
? netdev_drivername+0x3b/0x40
Nov 1 06:34:11 sl03500008171 kernel: [422261.952325] [<ffffffff81272fb6>]
? dev_watchdog+0xe2/0x194
Nov 1 06:34:11 sl03500008171 kernel: [422261.952330] [<ffffffff8100ecf2>]
? check_events+0x12/0x20
Nov 1 06:34:11 sl03500008171 kernel: [422261.952335] [<ffffffff8100ec12>]
? xen_vcpuop_set_next_event+0x0/0x60
Nov 1 06:34:11 sl03500008171 kernel: [422261.952341] [<ffffffff81058898>]
? cascade+0x5f/0x77
Nov 1 06:34:11 sl03500008171 kernel: [422261.952348] [<ffffffff8105b66f>]
? run_timer_softirq+0x1c9/0x268
Nov 1 06:34:11 sl03500008171 kernel: [422261.952354] [<ffffffff81054d1b>]
? __do_softirq+0xdd/0x1a6
Nov 1 06:34:11 sl03500008171 kernel: [422261.952360] [<ffffffff81012cac>]
? call_softirq+0x1c/0x30
Nov 1 06:34:11 sl03500008171 kernel: [422261.952365] [<ffffffff8101422b>]
? do_softirq+0x3f/0x7c
Nov 1 06:34:11 sl03500008171 kernel: [422261.952370] [<ffffffff81054b8b>]
? irq_exit+0x36/0x76
Nov 1 06:34:11 sl03500008171 kernel: [422261.952377] [<ffffffff811f28a5>]
? xen_evtchn_do_upcall+0x33/0x42
Nov 1 06:34:11 sl03500008171 kernel: [422261.952382] [<ffffffff81012cfe>]
? xen_do_hypervisor_callback+0x1e/0x30
Nov 1 06:34:11 sl03500008171 kernel: [422261.952385] <EOI>
[<ffffffff810093aa>] ? hypercall_page+0x3aa/0x1001
Nov 1 06:34:11 sl03500008171 kernel: [422261.952394] [<ffffffff810093aa>]
? hypercall_page+0x3aa/0x1001
Nov 1 06:34:11 sl03500008171 kernel: [422261.952399] [<ffffffff8100ec12>]
? xen_vcpuop_set_next_event+0x0/0x60
Nov 1 06:34:11 sl03500008171 kernel: [422261.952404] [<ffffffff8100e6b3>]
? xen_safe_halt+0xc/0x15
Nov 1 06:34:11 sl03500008171 kernel: [422261.952409] [<ffffffff8100bfc7>]
? xen_idle+0x37/0x40
Nov 1 06:34:11 sl03500008171 kernel: [422261.952413] [<ffffffff81010e97>]
? cpu_idle+0xa2/0xda
Nov 1 06:34:11 sl03500008171 kernel: [422261.952418] [<ffffffff8100ec99>]
? xen_irq_enable_direct_end+0x0/0x7
Nov 1 06:34:11 sl03500008171 kernel: [422261.952423] [<ffffffff81301ec8>]
? cpu_bringup+0x6d/0x72
Nov 1 06:34:11 sl03500008171 kernel: [422261.952427] ---[ end trace
5bed13ead60bc146 ]---
Nov 1 06:34:11 sl03500008171 kernel: [422261.952431] tg3 0000:02:04.0:
eth0: transmit timed out, resetting
Nov 1 06:34:11 sl03500008171 kernel: [422261.952495] tg3 0000:02:04.0:
eth0: DEBUG: MAC_TX_STATUS[00000008] MAC_RX_STATUS[00000000]
Nov 1 06:34:11 sl03500008171 kernel: [422261.952556] tg3 0000:02:04.0:
eth0: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
Nov 1 06:34:11 sl03500008171 kernel: [422262.053214] tg3 0000:02:04.0:
tg3_stop_block timed out, ofs=1400 enable_bit=2
Nov 1 06:34:11 sl03500008171 kernel: [422262.069016] tg3 0000:02:04.0:
eth0: Link is down
Nov 1 06:34:11 sl03500008171 kernel: [422262.103697] br0: port 1(eth0)
entering disabled state
My blade chassis reports this before accident (this
time, not sure about previous times):
2011/11/01 Tue 06:30:48 Watchdog 2 (Watchdog2)
Timer expired,interrupt type:none,timer use:OS Load
Asserted
2011/11/01 Tue 06:24:55 Watchdog 2 (Watchdog2)
Timer expired,interrupt type:none,timer use:OS Load
Deasserted
On screen I got this (previous accident, not this time):
http://dl.dropbox.com/u/13410057/559.jpeg
What additional information should I provide?
Thanks.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-38) (ben@decadent.org.uk)
(gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 07:53:54 UTC 2011
** Command line:
placeholder root=UUID=b31ead5b-d27c-4265-880a-b88d154318da ro quiet
** Not tainted
** Kernel log:
[ 86.471724] device vif6.0 entered promiscuous mode
[ 86.475503] br0: port 8(vif6.0) entering forwarding state
[ 86.489545] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 86.489549] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 86.489551] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 86.492548] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 86.492553] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 86.492557] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 86.492560] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 87.282468] blkback: ring-ref 8, event-channel 5, protocol 1 (x86_64-abi)
[ 87.282537] alloc irq_desc for 4251 on node -1
[ 87.282540] alloc kstat_irqs on node -1
[ 87.308074] alloc irq_desc for 4250 on node -1
[ 87.308077] alloc kstat_irqs on node -1
[ 87.352606] tap4.0: no IPv6 routers present
[ 87.412021] vif4.0: no IPv6 routers present
[ 90.559361] br0: port 4(tap4.0) entering disabled state
[ 90.593611] device tap4.0 left promiscuous mode
[ 90.593615] br0: port 4(tap4.0) entering disabled state
[ 91.937206] blkback: ring-ref 8, event-channel 5, protocol 1 (x86_64-abi)
[ 91.937269] alloc irq_desc for 4249 on node -1
[ 91.937272] alloc kstat_irqs on node -1
[ 91.970082] alloc irq_desc for 4248 on node -1
[ 91.970085] alloc kstat_irqs on node -1
[ 92.215944] vif5.0: no IPv6 routers present
[ 92.392004] tap5.0: no IPv6 routers present
[ 96.607910] vif6.0: no IPv6 routers present
[ 96.806989] alloc irq_desc for 4247 on node -1
[ 96.806993] alloc kstat_irqs on node -1
[ 97.020442] tap6.0: no IPv6 routers present
[ 97.089251] device tap7.0 entered promiscuous mode
[ 97.089271] br0: port 4(tap7.0) entering forwarding state
[ 97.348002] alloc irq_desc for 4246 on node -1
[ 97.348007] alloc kstat_irqs on node -1
[ 97.617025] device vif7.0 entered promiscuous mode
[ 97.622033] br0: port 9(vif7.0) entering forwarding state
[ 97.642792] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 97.642795] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 97.642798] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 97.642801] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 97.646369] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 97.646376] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 97.646380] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 97.646385] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 97.646389] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 98.456575] br0: port 6(tap5.0) entering disabled state
[ 98.490082] device tap5.0 left promiscuous mode
[ 98.490088] br0: port 6(tap5.0) entering disabled state
[ 100.398555] alloc irq_desc for 4245 on node -1
[ 100.398558] alloc kstat_irqs on node -1
[ 101.397731] blkback: ring-ref 770, event-channel 6, protocol 1
(x86_64-abi)
[ 101.397770] alloc irq_desc for 4244 on node -1
[ 101.397773] alloc kstat_irqs on node -1
[ 107.635876] tap7.0: no IPv6 routers present
[ 108.303853] vif7.0: no IPv6 routers present
[ 108.961493] alloc irq_desc for 4243 on node -1
[ 108.961498] alloc kstat_irqs on node -1
[ 109.132018] device tap8.0 entered promiscuous mode
[ 109.132040] br0: port 6(tap8.0) entering forwarding state
[ 109.349958] alloc irq_desc for 4242 on node -1
[ 109.349963] alloc kstat_irqs on node -1
[ 109.399839] device vif8.0 entered promiscuous mode
[ 109.403956] br0: port 10(vif8.0) entering forwarding state
[ 109.419916] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 109.419920] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 109.419923] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 109.419926] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 109.419928] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 109.423215] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 109.423220] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 109.423226] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 109.423230] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 109.423234] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 109.423238] physdev match: using --physdev-out in the OUTPUT, FORWARD
and POSTROUTING chains for non-bridged traffic is not supported anymore.
[ 114.663367] br0: port 3(tap6.0) entering disabled state
[ 114.693880] device tap6.0 left promiscuous mode
[ 114.693885] br0: port 3(tap6.0) entering disabled state
[ 116.125312] blkback: ring-ref 16383, event-channel 7, protocol
1 (unspecified, assuming native)
[ 116.125367] alloc irq_desc for 4241 on node -1
[ 116.125369] alloc kstat_irqs on node -1
[ 117.214966] br0: port 4(tap7.0) entering disabled state
[ 117.237478] device tap7.0 left promiscuous mode
[ 117.237481] br0: port 4(tap7.0) entering disabled state
[ 118.676093] blkback: ring-ref 8, event-channel 5, protocol 1 (x86_64-abi)
[ 118.676167] alloc irq_desc for 4240 on node -1
[ 118.676170] alloc kstat_irqs on node -1
[ 120.007399] alloc irq_desc for 4239 on node -1
[ 120.007404] alloc kstat_irqs on node -1
[ 120.048762] tap8.0: no IPv6 routers present
[ 120.375751] vif8.0: no IPv6 routers present
[ 129.698252] alloc irq_desc for 4238 on node -1
[ 129.698259] alloc kstat_irqs on node -1
[ 133.342882] br0: port 6(tap8.0) entering disabled state
[ 133.373175] device tap8.0 left promiscuous mode
[ 133.373179] br0: port 6(tap8.0) entering disabled state
[ 141.817516] blkback: ring-ref 8, event-channel 5, protocol 1 (x86_64-abi)
[ 141.817581] alloc irq_desc for 4237 on node -1
[ 141.817584] alloc kstat_irqs on node -1
[ 159.559217] alloc irq_desc for 4236 on node -1
[ 159.559222] alloc kstat_irqs on node -1
** Model information
sys_vendor: Huawei Technologies Co., Ltd.
product_name: Tecal BH620
product_version: V100R001
chassis_vendor: Huawei Technologies Co., Ltd.
chassis_version: empty
bios_vendor: American Megatrends Inc.
bios_version: CTSAV029
board_vendor: Huawei Technologies Co., Ltd.
board_name: BC01NTSA
board_version: V100R001
** Loaded modules:
Module Size
Used by
tun 10908
0
nf_conntrack_ipv4 9833 6
nf_defrag_ipv4 1139 1 nf_conntrack_ipv4
xt_state 1303 6
nf_conntrack 46519 2 nf_conntrack_ipv4,xt_state
xt_physdev 1508 12
ip6table_filter 2384 0
ip6_tables 15107 1 ip6table_filter
iptable_filter 2258 1
ip_tables 13915 1
iptable_filter
ebtable_nat 1588 0
ebtables 13933 1
ebtable_nat
x_tables 12845 5
xt_state,xt_physdev,ip6_tables,ip_tables,ebtables
nfs 241226
1
lockd 57619
1 nfs
fscache 29834 1
nfs
nfs_acl 2031 1
nfs
auth_rpcgss 33508 1 nfs
sunrpc 161573 10
nfs,lockd,nfs_acl,auth_rpcgss
cpufreq_userspace 1992 0
cpufreq_conservative 5162 0
cpufreq_powersave 902 0
cpufreq_stats 2740 0
xen_evtchn 4339 7
xenfs 9600
1
fuse 50940
1
bridge 39678 0
stp
1440 1 bridge
mptctl 20982 0
loop 11799
12
i2c_i801 7830 0
shpchp 26264 0
i2c_core 15819 1
i2c_i801
pci_hotplug 21587 1 shpchp
pcspkr 1699
0
evdev 7352
2
psmouse 49937 0
serio_raw 3752 0
button 4650
0
processor 35941 0
acpi_processor 5087 1 processor,[permanent]
ext4 288350
2
mbcache 5050 1
ext4
jbd2 67015
1 ext4
crc16 1319
1 ext4
dm_mod 53898 0
sd_mod 29905 4
crc_t10dif 1276 1
sd_mod
usbhid 33276 0
hid 63257
1 usbhid
ata_generic 3239 0
ata_piix 21124 0
mptsas 29188 3
uhci_hcd 18521 0
mptscsih 16360 1
mptsas
lpfc 361456
0
ehci_hcd 32065 0
libata 133760 2
ata_generic,ata_piix
scsi_transport_fc 35355 1 lpfc
mptbase 48382 3
mptctl,mptsas,mptscsih
scsi_tgt 8482 1
scsi_transport_fc
usbcore 122674 4
usbhid,uhci_hcd,ehci_hcd
scsi_transport_sas 19865 1 mptsas
tg3 104366
0
nls_base 6377 1
usbcore
scsi_mod 126517 9
mptctl,sd_mod,mptsas,mptscsih,lpfc,libata,scsi_transport_fc,scsi_tgt,scsi_transport_sas
libphy 14038 1
tg3
thermal 11674 0
thermal_sys 11942 2 processor,thermal
** Network interface configuration:
auto lo
iface lo inet loopback
iface eth0 inet manual
auto br0
iface br0 inet static
address 10.35.0.171
netmask 255.255.255.0
network 10.35.0.0
broadcast 10.35.0.255
gateway 10.35.0.254
dns-nameservers 10.35.0.2 10.35.0.7
dns-search opfr.local
bridge_ports eth0
bridge_stp off
bridge_fd 0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state
UP qlen 1000
link/ether 28:6e:d4:f1:6f:47 brd ff:ff:ff:ff:ff:ff
inet6 fe80::2a6e:d4ff:fef1:6f47/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen
1000
link/ether 28:6e:d4:f1:6f:48 brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UNKNOWN
link/ether 28:6e:d4:f1:6f:47 brd ff:ff:ff:ff:ff:ff
inet 10.35.0.171/24 brd 10.35.0.255 scope global br0
inet6 fe80::2a6e:d4ff:fef1:6f47/64 scope link
valid_lft forever preferred_lft forever
8: vif3.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UNKNOWN qlen 32
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
10: vif4.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UNKNOWN qlen 32
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
13: vif5.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UNKNOWN qlen 32
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
15: vif6.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UNKNOWN qlen 32
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
17: vif7.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UNKNOWN qlen 32
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
19: vif8.0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast state UNKNOWN qlen 32
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive
| Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes
packets errs drop fifo colls carrier compressed
lo: 1767 27 0
0 0 0
0 0 1767
27 0 0 0 0
0 0
eth0:33377051 178682 0 0
0 0 0
5322 36225282 161684 0 0 0
0 0 0
eth1: 0 0 0
0 0 0
0 0 0
0 0 0 0
0 0 0
br0:19085489 139147 0 0
0 0 0
13574 28755411 117349 0 0 0
0 0 0
vif3.0: 461717 2902 0 0
0 0 0
0 3806371 16214 0 54
0 0 0
0
vif4.0: 129341 2026 0 0
0 0 0
0 1450109 14711 0 62
0 0 0
0
vif5.0: 5544 106 0 0
0 0 0
0 1128887 13544 0 115
0 0 0
0
vif6.0: 204248 772 0 0
0 0 0
0 1287971 13973 0 196
0 0 0
0
vif7.0: 5537973 40324 0 0 0
0 0
0 9169799 48659 0 193 0
0 0 0
vif8.0: 426457 1917 0 0
0 0 0
0 1396936 15296 0 166
0 0 0
0
*** Protocol statistics:
Ip:
131908 total packets received
0 forwarded
862 with unknown protocol
0 incoming packets discarded
127914 incoming packets delivered
117205 requests sent out
Icmp:
30 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
redirects: 1
echo requests: 29
31 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 2
echo replies: 29
IcmpMsg:
InType5: 1
InType8: 29
OutType0: 29
OutType3: 2
Tcp:
38 active connections openings
149 passive connection openings
36 failed connection attempts
29 connection resets received
3 connections established
124929 segments received
116710 segments send out
1 segments retransmited
0 bad segments received.
0 resets sent
Udp:
475 packets received
2 packets to unknown port received.
0 packet receive errors
475 packets sent
UdpLite:
TcpExt:
2 TCP sockets finished time wait in fast timer
251 delayed acks sent
200 packets directly queued to recvmsg prequeue.
2 bytes directly received in process context from prequeue
110412 packet headers predicted
772 acknowledgments not containing data payload received
113525 predicted acknowledgments
1 other TCP timeouts
1 DSACKs sent for old packets
IpExt:
InMcastPkts: 34
InBcastPkts: 3306
InOctets: 18737951
OutOctets: 27108480
InMcastOctets: 1088
InBcastOctets: 392954
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5500 I/O Hub to ESI Port
[8086:3403] (rev 22)
Subsystem: Device [19e5:2009]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address:
00000000 Data: 0000
Masking:
00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
DevCap:
MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta:
CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap:
Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1
<4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl:
ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl:
ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap:
CRSVisible-
RootSta:
PME ReqID 0000, PMEStatus- PMEPending-
DevCap2:
Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2:
Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2:
Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis:
-6dB
Transmit Margin: Unknown, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -3.5dB
LnkSta2:
Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UEMsk:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UESvrt:
DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
UnsupReq- ACSViol-
CESta:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap:
First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap:
SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl:
SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c
<?>
00:01.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 1 [8086:3408] (rev 22) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
Memory behind bridge: fb900000-fb9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Device [19e5:2009]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address:
fee20000 Data: 40a0
Masking:
00000003 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap:
MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta:
CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap:
Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl:
ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap:
AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #49, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl:
Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta:
Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl:
ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap:
CRSVisible-
RootSta:
PME ReqID 0000, PMEStatus- PMEPending-
DevCap2:
Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2:
Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2:
Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis:
-6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2:
Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UEMsk:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UESvrt:
DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
UnsupReq- ACSViol-
CESta:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap:
First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap:
SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl:
SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c
<?>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 3 [8086:340a] (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fba00000-fbcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Device [19e5:2009]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address:
fee20000 Data: 40a8
Masking:
00000003 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap:
MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta:
CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap:
Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl:
ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap:
AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #51, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl:
Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta:
Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl:
ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap:
CRSVisible-
RootSta:
PME ReqID 0000, PMEStatus- PMEPending-
DevCap2:
Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2:
Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2:
Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis:
-6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2:
Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UEMsk:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UESvrt:
DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
UnsupReq- ACSViol-
CESta:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap:
First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap:
SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl:
SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c
<?>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 7 [8086:340e] (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Device [19e5:2009]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address:
fee20000 Data: 40b0
Masking:
00000003 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap:
MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta:
CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap:
Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl:
ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap:
AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #55, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl:
Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta:
Status: AttnBtn- PowerFlt- MRL- CmdCplt-
PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl:
ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap:
CRSVisible-
RootSta:
PME ReqID 0000, PMEStatus- PMEPending-
DevCap2:
Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2:
Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2:
Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis:
-6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2:
Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UEMsk:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UESvrt:
DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
UnsupReq- ACSViol-
CESta:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap:
First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap:
SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl:
SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c
<?>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Intel Corporation 5520/5500/X58 I/O Hub PCI
Express Root Port 9 [8086:3410] (rev 22) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Device [19e5:2009]
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address:
fee20000 Data: 40b8
Masking:
00000003 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap:
MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta:
CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap:
Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl:
ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap:
AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #57, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl:
Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta:
Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl:
ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap:
CRSVisible-
RootSta:
PME ReqID 0000, PMEStatus- PMEPending-
DevCap2:
Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2:
Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2:
Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis:
-6dB
Transmit Margin: Unknown, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -3.5dB
LnkSta2:
Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UEMsk:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UESvrt:
DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
UnsupReq- ACSViol-
CESta:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap:
First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap:
SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl:
SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Kernel driver in use: pcieport
00:13.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt
Controller [8086:342d] (rev 22) (prog-if 20 [IO(X)-APIC])
Subsystem: Device [00e5:0009]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fec8a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [6c] Power Management version 3
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:14.0 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub System Management
Registers [8086:342e] (rev 22) (prog-if 00 [8259])
Subsystem: Device [00e5:0009]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap:
MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta:
CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap:
Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl:
ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2:
Completion Timeout: Not Supported, TimeoutDis-
DevCtl2:
Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2:
Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis:
-6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2:
Current De-emphasis Level: -6dB
00:14.1 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch
Pad Registers [8086:3422] (rev 22) (prog-if 00 [8259])
Subsystem: Device [00e5:0009]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap:
MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta:
CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap:
Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl:
ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2:
Completion Timeout: Not Supported, TimeoutDis-
DevCtl2:
Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2:
Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis:
-6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2:
Current De-emphasis Level: -6dB
00:14.2 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Control Status
and RAS Registers [8086:3423] (rev 22) (prog-if 00 [8259])
Subsystem: Device [00e5:0009]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap:
MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta:
CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap:
Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl:
ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2:
Completion Timeout: Not Supported, TimeoutDis-
DevCtl2:
Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2:
Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis:
-6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2:
Current De-emphasis Level: -6dB
00:14.3 PIC [0800]: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers
[8086:3438] (rev 22) (prog-if 00 [8259])
Subsystem: Device [00e5:0009]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: Device [19e5:2009]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap:
TP+ FLR+
AFCtrl:
FLR-
AFStatus:
TP-
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller
#2 [8086:3a3c]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fb8fe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap:
TP+ FLR+
AFCtrl:
FLR-
AFStatus:
TP-
Kernel driver in use: ehci_hcd
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: Device [19e5:2009]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b480 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap:
TP+ FLR+
AFCtrl:
FLR-
AFStatus:
TP-
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: Device [19e5:2009]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b800 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap:
TP+ FLR+
AFCtrl:
FLR-
AFStatus:
TP-
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: Device [19e5:2009]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b880 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap:
TP+ FLR+
AFCtrl:
FLR-
AFStatus:
TP-
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family)
USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller
#1 [8086:3a3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fb8fc000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap:
TP+ FLR+
AFCtrl:
FLR-
AFStatus:
TP-
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e]
(rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Device [19e5:2009]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIB (ICH10) LPC Interface
Controller [8086:3a18]
Subsystem: Device [19e5:2009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family)
4 port SATA IDE Controller #1 [8086:3a20] (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Device [19e5:2009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at a400 [size=8]
Region 1: I/O ports at a080 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9c00 [size=4]
Region 4: I/O ports at 9880 [size=16]
Region 5: I/O ports at 9800 [size=16]
Capabilities: [70] Power Management version 3
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status:
D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap:
TP+ FLR+
AFCtrl:
FLR-
AFStatus:
TP-
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
[8086:3a30]
Subsystem: Device [19e5:2009]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fb8fa000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family)
2 port SATA IDE Controller #2 [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: Device [19e5:2009]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at b400 [size=8]
Region 1: I/O ports at b080 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at ac00 [size=4]
Region 4: I/O ports at a880 [size=16]
Region 5: I/O ports at a800 [size=16]
Capabilities: [70] Power Management version 3
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status:
D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCI Advanced Features
AFCap:
TP+ FLR+
AFCtrl:
FLR-
AFStatus:
TP-
Kernel driver in use: ata_piix
01:00.0 PCI bridge [0604]: Broadcom EPB PCI-Express to PCI-X Bridge [1166:0103]
(rev b5) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
Memory behind bridge: fb900000-fb9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr-
SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [60] Express (v1) PCI/PCI-X Bridge, MSI 00
DevCap:
MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta:
CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap:
Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl:
ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [90] PCI-X bridge device
Secondary
Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status:
Dev=01:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
Upstream:
Capacity=0 CommitmentLimit=0
Downstream:
Capacity=0 CommitmentLimit=0
Capabilities: [b0] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta:
DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UEMsk:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UESvrt:
DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
UnsupReq- ACSViol-
CESta:
RxErr+ BadTLP+ BadDLLP- Rollover+ Timeout- NonFatalErr-
CEMsk:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap:
First Error Pointer: 04, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [14c v1] Power Budgeting <?>
02:04.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5715S
Gigabit Ethernet [14e4:1679] (rev a3)
Subsystem: Broadcom Corporation NetXtreme BCM5715S Gigabit Ethernet [14e4:1679]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 4263
Region 0: Memory at fb9c0000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fb9b0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [40] PCI-X non-bridge device
Command:
DPERE- ERO- RBC=512 OST=1
Status:
Dev=02:04.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16
RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst- PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product
Name: Broadcom NetXtreme Gigabit Fiber Controller
Read-only
fields:
[PN] Part number: BCM95715s
[EC] Engineering changes: 106679-15
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum good, 30 byte(s) reserved
Read/write
fields:
[YA] Asset tag: XYZ01234567
[RW] Read-write area: 107 byte(s) free
End
Capabilities: [58] MSI: Enable+ Count=1/8 Maskable- 64bit+
Address:
00000000fee02000 Data: 4089
Kernel driver in use: tg3
02:04.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5715S
Gigabit Ethernet [14e4:1679] (rev a3)
Subsystem: Broadcom Corporation NetXtreme BCM5715S Gigabit Ethernet [14e4:1679]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 40
Region 0: Memory at fb9f0000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fb9e0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command:
DPERE- ERO+ RBC=512 OST=1
Status:
Dev=02:04.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16
RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status:
D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product
Name: Broadcom NetXtreme Gigabit Fiber Controller
Read-only
fields:
[PN] Part number: BCM95715s
[EC] Engineering changes: 106679-15
[SN] Serial number: 0123456789
[MN] Manufacture ID: 31 34 65 34
[RV] Reserved: checksum good, 30 byte(s) reserved
Read/write
fields:
[YA] Asset tag: XYZ01234567
[RW] Read-write area: 107 byte(s) free
End
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address:
0d954c1686670824 Data: 0b80
Kernel driver in use: tg3
03:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064ET
PCI-Express Fusion-MPT SAS [1000:0056] (rev 10)
Subsystem: Device [19e5:d201]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 24
Region 0: I/O ports at c000 [size=256]
Region 1: Memory at fbcfc000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at fbce0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at fba00000 [disabled] [size=2M]
Capabilities: [50] Power Management version 2
Flags:
PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status:
D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Express (v1) Endpoint, MSI 00
DevCap:
MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta:
CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap:
Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1
<1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl:
ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [98] MSI: Enable- Count=1/1 Maskable- 64bit+
Address:
0000000000000000 Data: 0000
Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
Vector
table: BAR=1 offset=00002000
PBA:
BAR=1 offset=00003000
Capabilities: [100 v1] Advanced Error Reporting
UESta:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq+ ACSViol-
UEMsk:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UESvrt:
DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
UnsupReq- ACSViol-
CESta:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap:
First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Kernel driver in use: mptsas
04:00.0 Fibre Channel [0c04]: Emulex Corporation Zephyr-X LightPulse Fibre
Channel Host Adapter [10df:fe00] (rev 02)
Subsystem: Emulex Corporation Device [10df:fe25]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at fbdfd000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at fbdfe800 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at d400 [size=256]
Expansion ROM at fbd40000 [disabled] [size=256K]
Capabilities: [58] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status:
D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/8 Maskable- 64bit+
Address:
0000000000000000 Data: 0000
Capabilities: [70] Vital Product Data
Product
Name: FC3532 Zephyr HBA product
Read-only
fields:
[PN] Part number: FC3532
[V1] Vendor specific: FC3532 4G FC Mezzanine Card
[V2] Vendor specific: FC3532
[V3] Vendor specific: T2:E1,E8,T3:E1,E2,E3,E5,E6,E7,T6:E1,T7:E1,TB:E1
[V4] Vendor specific: 0
[V5] Vendor specific: LPe1102
[RV] Reserved: checksum good, 108 byte(s) reserved
End
Capabilities: [44] Express (v1) Endpoint, MSI 00
DevCap:
MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta:
CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap:
Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl:
ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq+ ACSViol-
UEMsk:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UESvrt:
DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
UnsupReq- ACSViol-
CESta:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap:
First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [12c v1] Power Budgeting <?>
Kernel driver in use: lpfc
04:00.1 Fibre Channel [0c04]: Emulex Corporation Zephyr-X LightPulse Fibre
Channel Host Adapter [10df:fe00] (rev 02)
Subsystem: Emulex Corporation Device [10df:fe25]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 37
Region 0: Memory at fbdff000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at fbdfec00 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at d800 [size=256]
Expansion ROM at fbd80000 [disabled] [size=256K]
Capabilities: [58] Power Management version 2
Flags:
PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status:
D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/8 Maskable- 64bit+
Address:
0000000000000000 Data: 0000
Capabilities: [70] Vital Product Data
Product
Name: FC3532 Zephyr HBA product
Read-only
fields:
[PN] Part number: FC3532
[V1] Vendor specific: FC3532 4G FC Mezzanine Card
[V2] Vendor specific: FC3532
[V3] Vendor specific: T2:E1,E8,T3:E1,E2,E3,E5,E6,E7,T6:E1,T7:E1,TB:E1
[V4] Vendor specific: 1
[V5] Vendor specific: LPe1102
[RV] Reserved: checksum good, 108 byte(s) reserved
End
Capabilities: [44] Express (v1) Endpoint, MSI 00
DevCap:
MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl:
Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta:
CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap:
Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl:
ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta:
Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq+ ACSViol-
UEMsk:
DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC-
UnsupReq- ACSViol-
UESvrt:
DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC-
UnsupReq- ACSViol-
CESta:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk:
RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap:
First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [12c v1] Power Budgeting <?>
Kernel driver in use: lpfc
06:00.0 VGA compatible controller [0300]: XGI Technology Inc. (eXtreme
Graphics Innovation) Z9s/Z9m (XG21 core) [18ca:0021] (prog-if 00 [VGA controller])
Subsystem: Device [19e5:d003]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
BIST result: 00
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at fbec0000 (32-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Power Management version 2
Flags:
PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status:
D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
** Sound cards:
-- System Information:
Debian Release: 6.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/16 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-xen-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1
Debian configuration management sy
ii initramfs-tools
0.98.8 tools for generating an initramfs
ii linux-base
2.6.32-38 Linux image base package
ii module-init-tools 3.12-1
tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-xen-amd64 recommends:
ii firmware-linux-free 2.6.32-38
Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-xen-amd64 suggests:
pn grub
<none> (no description available)
pn linux-doc-2.6.32 <none>
(no description available)
Versions of packages linux-image-2.6.32-5-xen-amd64 is related to:
pn firmware-bnx2
<none> (no description available)
pn firmware-bnx2x
<none> (no description available)
pn firmware-ipw2x00 <none>
(no description available)
pn firmware-ivtv
<none> (no description available)
pn firmware-iwlwifi
<none> (no description available)
pn firmware-linux
<none> (no description available)
ii firmware-linux-nonfree 0.28
Binary firmware for various driver
pn firmware-qlogic
<none> (no description available)
pn firmware-ralink
<none> (no description available)
ii xen-hypervisor-4.0-amd64 [xen 4.0.1-2 The Xen Hypervisor
on AMD64
-- debconf information:
linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64:
false
linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64:
linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64:
true
linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64:
Reply to: