Your message dated Mon, 14 Nov 2011 14:05:40 +0000 with message-id <1321279540.2885.9.camel@deadeye> and subject line Re: Bug#648191: linux-image-2.6.32-5-686: latest squeeze kernel doesn't boot on Dell Optiplex GX270 if hyperthreading enabled has caused the Debian Bug report #648191, regarding linux-image-2.6.32-5-686: latest squeeze kernel doesn't boot on Dell Optiplex GX270 if hyperthreading enabled to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 648191: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=648191 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-686: latest squeeze kernel doesn't boot on Dell Optiplex GX270 if hyperthreading enabled
- From: John Hughes <john@calva.com>
- Date: Wed, 09 Nov 2011 14:53:54 +0100
- Message-id: <[🔎] 20111109135354.19193.38079.reportbug@bovic.calvaedi.com>
Package: linux-2.6 Version: 2.6.32-38 Severity: normal Previous versions of this package, for example 2.6.32-31, had no problem booting on this hardware. Version 2.6.32-38 spontaneously reboots during the boot process unless hyperthreading is disabled. (Says something about activating 2nd CPU. I'll try and get a serial console hooked up tomorrow to get the exact message). -- Package-specific info: ** Version: Linux version 2.6.32-5-686 (Debian 2.6.32-38) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 04:15:24 UTC 2011 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=08954096-775f-4ba9-9095-1abf28a22da6 ro quiet ** Not tainted ** Kernel log: [ 7347.542308] [<f7ce02d7>] ? xs_sendpages+0x6e/0x183 [sunrpc] [ 7347.542320] [<f7ce1e58>] ? rpc_wait_bit_killable+0x24/0x27 [sunrpc] [ 7347.542326] [<c126dbc1>] ? __wait_on_bit+0x33/0x58 [ 7347.542338] [<f7ce1e34>] ? rpc_wait_bit_killable+0x0/0x27 [sunrpc] [ 7347.542343] [<c126dc9b>] ? out_of_line_wait_on_bit+0xb5/0xbd [ 7347.542355] [<f7ce1e34>] ? rpc_wait_bit_killable+0x0/0x27 [sunrpc] [ 7347.542360] [<c104405b>] ? wake_bit_function+0x0/0x3c [ 7347.542370] [<f7ce23d1>] ? __rpc_execute+0xc8/0x1e8 [sunrpc] [ 7347.542379] [<f7cdd288>] ? rpc_run_task+0x43/0x48 [sunrpc] [ 7347.542387] [<f7cdd392>] ? rpc_call_sync+0x3f/0x5a [sunrpc] [ 7347.542401] [<f8155743>] ? nfs4_proc_access+0x13f/0x1ae [nfs] [ 7347.542407] [<c11cf651>] ? sock_def_readable+0x34/0x5e [ 7347.542411] [<c123081b>] ? unix_stream_sendmsg+0x238/0x2c4 [ 7347.542416] [<c11ccc49>] ? __sock_sendmsg+0x43/0x4a [ 7347.542426] [<f8142fca>] ? nfs_do_access+0x14e/0x34b [nfs] [ 7347.542438] [<f7ce31e4>] ? rpcauth_lookupcred+0x60/0x83 [sunrpc] [ 7347.542448] [<f8143288>] ? nfs_permission+0xc1/0x14f [nfs] [ 7347.542453] [<c10ba2ce>] ? __link_path_walk+0x5d/0x5de [ 7347.542457] [<c10baa05>] ? path_walk+0x4f/0xa3 [ 7347.542461] [<c10bbb81>] ? do_path_lookup+0x1f/0x69 [ 7347.542465] [<c10bcce9>] ? user_path_at+0x37/0x5f [ 7347.542470] [<c10b6467>] ? vfs_fstatat+0x2a/0x50 [ 7347.542474] [<c10b6549>] ? vfs_stat+0x10/0x12 [ 7347.542477] [<c10b655a>] ? sys_stat64+0xf/0x23 [ 7347.542482] [<c10c1453>] ? dput+0x22/0x105 [ 7347.542486] [<c10c5143>] ? mntput_no_expire+0x17/0xb6 [ 7347.542491] [<c126ecd0>] ? do_device_not_available+0x0/0x4d [ 7347.542495] [<c126ed0d>] ? do_device_not_available+0x3d/0x4d [ 7347.542499] [<c10b1b70>] ? sys_close+0x5a/0x8d [ 7347.542503] [<c10030fb>] ? sysenter_do_call+0x12/0x28 [ 7347.542506] flush-0:23 S f5b91ef0 0 18941 2 0x00000000 [ 7347.542511] f4c99540 00000046 f58714d8 f5b91ef0 f5b91ef0 c141d100 c141d100 f5b91f78 [ 7347.542519] f4c996fc c2808100 00000000 b7ef9b6a 000006ae c14534e0 c14534e0 c103b0f4 [ 7347.542526] f5b91f5c f4c996fc 00000296 c14534e0 c103b24e 00000000 001ae730 00000296 [ 7347.542534] Call Trace: [ 7347.542538] [<c103b0f4>] ? lock_timer_base+0x19/0x35 [ 7347.542542] [<c103b24e>] ? __mod_timer+0x13e/0x148 [ 7347.542548] [<c126da01>] ? schedule_timeout+0x80/0xb0 [ 7347.542552] [<c103b3bb>] ? process_timeout+0x0/0x5 [ 7347.542556] [<c10ca007>] ? bdi_writeback_task+0x64/0x89 [ 7347.542560] [<c1098655>] ? bdi_start_fn+0x59/0xa4 [ 7347.542564] [<c10985fc>] ? bdi_start_fn+0x0/0xa4 [ 7347.542568] [<c1043dfc>] ? kthread+0x61/0x66 [ 7347.542572] [<c1043d9b>] ? kthread+0x0/0x66 [ 7347.542576] [<c1003d47>] ? kernel_thread_helper+0x7/0x10 [ 7347.542580] Sched Debug Version: v0.09, 2.6.32-5-686 #1 [ 7347.542584] now at 7347542.584471 msecs [ 7347.542586] .jiffies : 1761885 [ 7347.542590] .sysctl_sched_latency : 5.000000 [ 7347.542593] .sysctl_sched_min_granularity : 1.000000 [ 7347.542596] .sysctl_sched_wakeup_granularity : 1.000000 [ 7347.542598] .sysctl_sched_child_runs_first : 0.000000 [ 7347.542601] .sysctl_sched_features : 32611451 [ 7347.542605] [ 7347.542606] cpu#0, 2593.870 MHz [ 7347.542608] .nr_running : 1 [ 7347.542611] .load : 1024 [ 7347.542613] .nr_switches : 3152254 [ 7347.542616] .nr_load_updates : 299215 [ 7347.542618] .nr_uninterruptible : 2 [ 7347.542621] .next_balance : 1.757028 [ 7347.542624] .curr->pid : 18750 [ 7347.542627] .clock : 7347540.003641 [ 7347.542629] .cpu_load[0] : 1024 [ 7347.542632] .cpu_load[1] : 1024 [ 7347.542634] .cpu_load[2] : 1024 [ 7347.542636] .cpu_load[3] : 1024 [ 7347.542639] .cpu_load[4] : 1024 [ 7347.542642] [ 7347.542643] cfs_rq[0]:/ [ 7347.542646] .exec_clock : 0.000000 [ 7347.542649] .MIN_vruntime : 0.000001 [ 7347.542652] .min_vruntime : 1257815.162715 [ 7347.542655] .max_vruntime : 0.000001 [ 7347.542657] .spread : 0.000000 [ 7347.542660] .spread0 : 0.000000 [ 7347.542663] .nr_running : 1 [ 7347.542665] .load : 1024 [ 7347.542667] .nr_spread_over : 0 [ 7347.542670] .shares : 0 [ 7347.542672] [ 7347.542673] rt_rq[0]: [ 7347.542676] .rt_nr_running : 0 [ 7347.542678] .rt_throttled : 0 [ 7347.542680] .rt_time : 0.000000 [ 7347.542683] .rt_runtime : 950.000000 [ 7347.542686] [ 7347.542687] runnable tasks: [ 7347.542688] task PID tree-key switches prio exec-runtime sum-exec sum-sleep [ 7347.542690] ---------------------------------------------------------------------------------------------------------- [ 7347.542735] R pm-suspend 18750 1257815.162715 103 120 0 0 0.000000 0.000000 0.000000 / [ 7347.542745] [ 7347.542784] nm-applet [ 7347.542798] dbus-daemon-lau [ 7347.542802] [ 7347.542803] Restarting tasks ... done. [ 7347.820400] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7347.824385] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 7347.824789] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 7358.724009] eth0: no IPv6 routers present ** Model information not available ** Loaded modules: Module Size Used by des_generic 15027 16 cbc 2047 16 autofs4 16667 2 speedstep_lib 2468 0 cpufreq_conservative 4018 0 cpufreq_powersave 602 0 cpufreq_stats 1997 0 cpufreq_userspace 1480 0 ppdev 4058 0 lp 5570 0 sco 5885 2 bridge 33031 0 stp 996 1 bridge bnep 7452 2 l2cap 21721 3 bnep crc16 1027 1 l2cap bluetooth 36319 5 sco,bnep,l2cap rfkill 10264 3 bluetooth binfmt_misc 4907 1 fuse 44268 1 rpcsec_gss_krb5 7477 9 nfsd 193919 2 exportfs 2618 1 nfsd nfs 207234 2 lockd 49449 2 nfsd,nfs fscache 24662 1 nfs nfs_acl 1695 2 nfsd,nfs auth_rpcgss 25296 4 rpcsec_gss_krb5,nfsd,nfs sunrpc 134848 15 rpcsec_gss_krb5,nfsd,nfs,lockd,nfs_acl,auth_rpcgss loop 9769 0 snd_hda_codec_atihdmi 1687 1 snd_intel8x0 19595 0 snd_hda_intel 16823 0 snd_hda_codec 46002 2 snd_hda_codec_atihdmi,snd_hda_intel snd_ac97_codec 79200 1 snd_intel8x0 snd_hwdep 4054 1 snd_hda_codec ac97_bus 710 1 snd_ac97_codec snd_pcm 47226 4 snd_intel8x0,snd_hda_intel,snd_hda_codec,snd_ac97_codec radeon 511948 3 ttm 33502 1 radeon snd_seq 35463 0 drm_kms_helper 18569 1 radeon snd_timer 12270 2 snd_pcm,snd_seq drm 111992 5 radeon,ttm,drm_kms_helper snd_seq_device 3673 1 snd_seq i2c_i801 6462 0 i2c_algo_bit 3497 1 radeon snd 34423 9 snd_intel8x0,snd_hda_intel,snd_hda_codec,snd_ac97_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device parport_pc 15799 1 soundcore 3450 1 snd shpchp 21220 0 dcdbas 3892 0 parport 22554 3 ppdev,lp,parport_pc snd_page_alloc 5045 3 snd_intel8x0,snd_hda_intel,snd_pcm rng_core 2178 0 pcspkr 1207 0 i2c_core 12787 5 radeon,drm_kms_helper,drm,i2c_i801,i2c_algo_bit pci_hotplug 18545 1 shpchp processor 26327 0 button 3598 0 evdev 5609 7 usbhid 28008 0 hid 50909 1 usbhid ext3 94396 1 jbd 32317 1 ext3 mbcache 3762 1 ext3 sg 19937 0 sr_mod 10770 0 cdrom 26487 1 sr_mod sd_mod 26005 3 crc_t10dif 1012 1 sd_mod usb_storage 30905 0 ata_generic 2247 0 uhci_hcd 16057 0 ata_piix 17736 2 thermal 9206 0 e1000 77317 0 ehci_hcd 28693 0 libata 115869 2 ata_generic,ata_piix scsi_mod 104853 5 sg,sr_mod,sd_mod,usb_storage,libata usbcore 98969 5 usbhid,usb_storage,uhci_hcd,ehci_hcd nls_base 4541 1 usbcore thermal_sys 9378 2 processor,thermal ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug eth0 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:12:3f:98:4d:eb brd ff:ff:ff:ff:ff:ff inet 192.168.6.103/24 brd 192.168.6.255 scope global eth0 inet6 fe80::212:3fff:fe98:4deb/64 scope link valid_lft forever preferred_lft forever 3: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether a2:9d:06:7c:b6:f9 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 13252 188 0 0 0 0 0 0 13252 188 0 0 0 0 0 0 eth0:234821432 269905 0 324 0 0 0 10157 710126591 219501 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 257963 total packets received 8 with invalid addresses 0 forwarded 0 incoming packets discarded 257955 incoming packets delivered 179187 requests sent out 140 dropped because of missing route Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 217 active connections openings 18 passive connection openings 6 failed connection attempts 45 connection resets received 8 connections established 251377 segments received 178365 segments send out 66 segments retransmited 0 bad segments received. 71 resets sent Udp: 5689 packets received 0 packets to unknown port received. 0 packet receive errors 692 packets sent UdpLite: TcpExt: 59 TCP sockets finished time wait in fast timer 1237 delayed acks sent Quick ack mode was activated 26 times 31 packets directly queued to recvmsg prequeue. 30 bytes directly received in process context from prequeue 210653 packet headers predicted 850 acknowledgments not containing data payload received 109528 predicted acknowledgments 2 congestion windows recovered without slow start after partial ack 10 other TCP timeouts 26 DSACKs sent for old packets 4 connections reset due to unexpected data 45 connections reset due to early user close 8 connections aborted due to timeout TCPSackShiftFallback: 5 IpExt: InMcastPkts: 5017 OutMcastPkts: 100 InBcastPkts: 894 InOctets: 229239398 OutOctets: 113301360 InMcastOctets: 1406080 OutMcastOctets: 7594 InBcastOctets: 247229 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02) Subsystem: Dell Device [1028:0151] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:01.0 PCI bridge [0604]: Intel Corporation 82865G/PE/P PCI to AGP Controller [8086:2571] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe900000-feafffff Prefetchable memory behind bridge: d8000000-efffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02) Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K] 00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0151] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff80 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0151] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at ff60 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0151] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ff40 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:0151] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff20 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:0151] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fe800000-fe8fffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Dell Device [1028:0151] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ffa0 [size=16] Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: ata_piix 00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device [1028:0151] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fe10 [size=4] Region 2: I/O ports at fe20 [size=8] Region 3: I/O ports at fe30 [size=4] Region 4: I/O ports at fea0 [size=16] Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02) Subsystem: Dell Device [1028:0151] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at eda0 [size=32] Kernel driver in use: i801_smbus 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02) Subsystem: Dell Device [1028:0151] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at ee00 [size=256] Region 1: I/O ports at edc0 [size=64] Region 2: Memory at febffa00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at febff900 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: Intel ICH 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV620 LE AGP [Radeon HD 3450] [1002:95c6] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:0028] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at de00 [size=256] Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 01:00.1 Audio device [0403]: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series] [1002:aa28] Subsystem: ASUSTeK Computer Inc. Device [1043:aa28] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fe9ec000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 02:0c.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02) Subsystem: Dell Optiplex GX270 [1028:0151] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (63750ns min), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fe8e0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at cf40 [size=64] Capabilities: <access denied> Kernel driver in use: e1000 ** USB devices: Bus 005 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0471:0854 Philips (or NXP) Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 002: ID 04b4:6560 Cypress Semiconductor Corp. CY7C65640 USB-2.0 "TetraHub" Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-686 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-38 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-686 recommends: ii firmware-linux-free 2.6.32-38 Binary firmware for various driver ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-5-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) ii firmware-linux 0.28+squeeze1 Binary firmware for various driver ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686: linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---
--- Begin Message ---
- To: 648191-done@bugs.debian.org
- Subject: Re: Bug#648191: linux-image-2.6.32-5-686: latest squeeze kernel doesn't boot on Dell Optiplex GX270 if hyperthreading enabled
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 14 Nov 2011 14:05:40 +0000
- Message-id: <1321279540.2885.9.camel@deadeye>
- In-reply-to: <[🔎] 4EC0E884.5000304@Calva.COM>
- References: <[🔎] 20111109135354.19193.38079.reportbug@bovic.calvaedi.com> <[🔎] 1321250291.2885.2.camel@deadeye> <[🔎] 4EC0E884.5000304@Calva.COM>
On Mon, 2011-11-14 at 11:08 +0100, John Hughes wrote: > On 14/11/11 06:58, Ben Hutchings wrote: > > > > Could you test an intermediate version, say, 2.6.32-34squeeze1? Earlier > > versions are available at > > <http://snapshot.debian.org/binary/linux-image-2.6.32-5-686/>. > > > > I'm really sorry but I am unable to reproduce this bug. > > I tried 2.6.32-34squeeze1, it worked > 2.6.32-36 worked > 2.6.32-37 worked > > Just to make sure I tried the version that was giving me problems... > 2.6.32-38 worked. > > WTF! > > I must have made some unimaginably stupid mistake, but I can't work out > what at the moment. It's probably not your mistake but some sort of bug in the BIOS that only manifests occasionally. I'll close this now, but feel free to follow-up if you see the bug again. Ben. -- Ben Hutchings The world is coming to an end. Please log off.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---