Bug#639505: Samsung N150 can reboot on waking from hibernation unless ath9k unloaded
log files attached,
I'll tell defenetely is new kernel working in a few days of testing,
maybe suspend period should be more than a few minutes to catch this
bug.
On Mon, Oct 17, 2011 at 9:58 PM, Jonathan Nieder <jrnieder@gmail.com> wrote:
> Sergei Stolyarov wrote:
>
>> Hi, I almost forgot about this bug.
>>
>> I've installed latest sid 3.0 kernel (linux-image-3.0.0-2-686-pae
>> 3.0.0-5) and it's working fine without the module unload workaround,
>> no reboot after resume for 10 hibernate-resume cycles.
>
> Thanks, Sergei. Weird --- so this means
>
> 2.6.32-31: intermittent reboots on resume
> 3.0.0-1 (?): intermittent reboots on resume, unless
> module unload workaround applied
> 3.0.0-5: no problem
>
> There were some ath9k fixes in the 3.0.y stable series, but it's not
> obvious which would have cured these symptoms. The most dramatic
> change (ath9k: skip ->config_pci_powersave() if PCIe port has ASPM
> disabled, 2011-07-29) is supposed to have fixed a regression
> introduced in v2.6.35, which is way later than v2.6.32 (and the patch
> causing it does not seem to have been backported). I guess it would
> be useful to know what chipset you use.
>
> Please attach output from
>
> /usr/share/bug/linux-image-$(uname -r)/script 3>&1
>
> and "dmesg" output from right after booting.
>
--
Sergei Stolyarov
** Version:
Linux version 3.0.0-2-686-pae (Debian 3.0.0-5) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-9) ) #1 SMP Fri Oct 7 21:55:20 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.0.0-2-686-pae root=UUID=840e1ee5-5959-4889-9fde-4a9f5a79db5f ro quiet
** Not tainted
** Kernel log:
[ 5.592620] hub 1-0:1.0: 8 ports detected
[ 5.615173] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.615278] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.615300] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.615310] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.615341] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.615395] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 5.615501] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.615510] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.615518] usb usb2: Product: UHCI Host Controller
[ 5.615525] usb usb2: Manufacturer: Linux 3.0.0-2-686-pae uhci_hcd
[ 5.615533] usb usb2: SerialNumber: 0000:00:1d.0
[ 5.615901] hub 2-0:1.0: USB hub found
[ 5.615919] hub 2-0:1.0: 2 ports detected
[ 5.616245] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.616266] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.616277] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.616316] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 5.616395] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 5.616499] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.616509] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.616517] usb usb3: Product: UHCI Host Controller
[ 5.616524] usb usb3: Manufacturer: Linux 3.0.0-2-686-pae uhci_hcd
[ 5.616531] usb usb3: SerialNumber: 0000:00:1d.1
[ 5.616885] hub 3-0:1.0: USB hub found
[ 5.616901] hub 3-0:1.0: 2 ports detected
[ 5.617108] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.617133] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.617143] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.617170] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.617244] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 5.617354] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.617363] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.617372] usb usb4: Product: UHCI Host Controller
[ 5.617379] usb usb4: Manufacturer: Linux 3.0.0-2-686-pae uhci_hcd
[ 5.617386] usb usb4: SerialNumber: 0000:00:1d.2
[ 5.617726] hub 4-0:1.0: USB hub found
[ 5.617743] hub 4-0:1.0: 2 ports detected
[ 5.617952] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 5.622144] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.622157] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.622198] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.622256] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 5.622368] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.622378] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.622386] usb usb5: Product: UHCI Host Controller
[ 5.622394] usb usb5: Manufacturer: Linux 3.0.0-2-686-pae uhci_hcd
[ 5.622401] usb usb5: SerialNumber: 0000:00:1d.3
[ 5.631030] hub 5-0:1.0: USB hub found
[ 5.631050] hub 5-0:1.0: 2 ports detected
[ 6.016096] usb 1-8: new high speed USB device number 3 using ehci_hcd
[ 6.163278] usb 1-8: New USB device found, idVendor=0ac8, idProduct=c33f
[ 6.163296] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.163303] usb 1-8: Product: WebCam SCB-0340N
[ 6.163307] usb 1-8: Manufacturer: Namuga.
[ 6.404085] usb 4-2: new full speed USB device number 2 using uhci_hcd
[ 6.579338] usb 4-2: New USB device found, idVendor=0a5c, idProduct=219b
[ 6.579349] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.579357] usb 4-2: Product: Broadcom Bluetooth 2.1 Device
[ 6.579363] usb 4-2: Manufacturer: Broadcom Corp
[ 6.579369] usb 4-2: SerialNumber: F07BCBC642FE
[ 6.655934] Linux media interface: v0.10
[ 6.686477] Bluetooth: Core ver 2.16
[ 6.686536] NET: Registered protocol family 31
[ 6.686543] Bluetooth: HCI device and connection manager initialized
[ 6.686551] Bluetooth: HCI socket layer initialized
[ 6.686557] Bluetooth: L2CAP socket layer initialized
[ 6.687105] Bluetooth: SCO socket layer initialized
[ 6.705868] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.708277] usbcore: registered new interface driver btusb
[ 6.724791] Linux video capture interface: v2.00
[ 6.771233] uvcvideo: Found UVC 1.00 device WebCam SCB-0340N (0ac8:c33f)
[ 6.773637] input: WebCam SCB-0340N as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input10
[ 6.774465] usbcore: registered new interface driver uvcvideo
[ 6.774473] USB Video Class driver (v1.1.0)
[ 8.088188] Adding 9739260k swap on /dev/sda3. Priority:-1 extents:1 across:9739260k
[ 8.552494] EXT3-fs (sda1): using internal journal
[ 8.679252] loop: module loaded
[ 10.224398] EXT3-fs: barriers not enabled
[ 10.224855] kjournald starting. Commit interval 5 seconds
[ 10.225566] EXT3-fs (sda2): using internal journal
[ 10.225575] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 11.697453] RPC: Registered named UNIX socket transport module.
[ 11.697462] RPC: Registered udp transport module.
[ 11.697467] RPC: Registered tcp transport module.
[ 11.697473] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.734726] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.772696] FS-Cache: Loaded
[ 11.809025] FS-Cache: Netfs 'nfs' registered for caching
[ 11.894761] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.239416] fuse init (API version 7.16)
[ 14.151423] wlan0: authenticate with 00:1d:7e:3a:4f:ca (try 1)
[ 14.152996] wlan0: authenticated
[ 14.173573] wlan0: associate with 00:1d:7e:3a:4f:ca (try 1)
[ 14.177302] wlan0: RX AssocResp from 00:1d:7e:3a:4f:ca (capab=0x431 status=0 aid=1)
[ 14.177313] wlan0: associated
[ 14.178040] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.167195] cpufreq-nforce2: No nForce2 chipset.
[ 16.314684] powernow: This module only works with AMD K7 CPUs
[ 24.672043] wlan0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
cpufreq_userspace 12520 0
cpufreq_powersave 12422 0
cpufreq_conservative 12987 0
acpi_cpufreq 12865 1
mperf 12421 1 acpi_cpufreq
cpufreq_stats 12758 0
speedstep_lib 12570 0
fuse 56331 1
nfsd 197906 2
nfs 218412 0
lockd 61314 2 nfsd,nfs
fscache 31952 1 nfs
auth_rpcgss 32183 2 nfsd,nfs
nfs_acl 12463 2 nfsd,nfs
sunrpc 139050 6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
loop 17866 0
uvcvideo 56927 0
videodev 61530 1 uvcvideo
btusb 17246 0
bluetooth 94736 1 btusb
crc16 12327 1 bluetooth
media 13692 2 uvcvideo,videodev
joydev 17006 0
uhci_hcd 22275 0
snd_hda_codec_realtek 206339 1
arc4 12418 2
ehci_hcd 35401 0
ath9k 67304 0
usbcore 104234 5 uvcvideo,btusb,uhci_hcd,ehci_hcd
mac80211 165727 1 ath9k
ath9k_common 12610 1 ath9k
snd_hda_intel 21691 0
ath9k_hw 250412 2 ath9k,ath9k_common
snd_hda_codec 58364 2 snd_hda_codec_realtek,snd_hda_intel
ath 17181 2 ath9k,ath9k_hw
snd_hwdep 12936 1 snd_hda_codec
snd_pcm 53315 2 snd_hda_intel,snd_hda_codec
cfg80211 112970 3 ath9k,mac80211,ath
snd_seq 39539 0
snd_timer 22027 2 snd_pcm,snd_seq
snd_seq_device 12985 1 snd_seq
snd 38562 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
evdev 12995 6
i915 294451 2
sky2 40468 0
i2c_i801 12670 0
pcspkr 12515 0
psmouse 46216 0
soundcore 12992 1 snd
drm_kms_helper 22688 1 i915
snd_page_alloc 12899 2 snd_hda_intel,snd_pcm
serio_raw 12734 0
rfkill 18522 2 bluetooth,cfg80211
battery 12957 0
drm 129847 3 i915,drm_kms_helper
i2c_algo_bit 12722 1 i915
i2c_core 19141 6 videodev,i915,i2c_i801,drm_kms_helper,drm,i2c_algo_bit
video 17475 1 i915
ac 12552 0
power_supply 13283 2 battery,ac
button 12810 1 i915
processor 27382 1 acpi_cpufreq
ext3 99597 2
jbd 42027 1 ext3
mbcache 12898 1 ext3
sd_mod 35493 4
crc_t10dif 12332 1 sd_mod
ahci 20897 3
libahci 18231 1 ahci
libata 133339 2 ahci,libahci
scsi_mod 135178 2 sd_mod,libata
thermal 13138 0
thermal_sys 17677 3 video,processor,thermal
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-2-686-pae (Debian 3.0.0-5) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-9) ) #1 SMP Fri Oct 7 21:55:20 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f5b0000 (usable)
[ 0.000000] BIOS-e820: 000000007f5b0000 - 000000007f5c0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f5c0000 - 000000007f5c3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f5c3000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. N150/N210/N220 /N150/N210/N220 , BIOS 08JI.M073.20100325.JIP 03/25/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f5b0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F600000 mask 0FFE00000 uncachable
[ 0.000000] 2 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f7dd0] f7dd0
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 37b74000 - 37db2000
[ 0.000000] Allocated new RAMDISK: 377c0000 - 379fd234
[ 0.000000] Move RAMDISK from 0000000037b74000 - 0000000037db1233 to 377c0000 - 379fd233
[ 0.000000] ACPI: RSDP 000f7da0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 7f5b8db7 0006C (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7f5bfc92 000F4 (v03 INTEL 06040000 PTL 00000002)
[ 0.000000] ACPI: DSDT 7f5ba01f 05B7F (v01 INTEL BEARG31A 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 7f5c2fc0 00040
[ 0.000000] ACPI: MCFG 7f5bfd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 7f5bfdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 7f5bfdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7f5bfe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 7f5bfe8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 7f5b93bf 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f5b9319 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 7f5b8e23 004F6 (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1147MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0007f5b0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0007f5b0
[ 0.000000] On node 0 totalpages: 521533
[ 0.000000] free_area_init_node: node 0, pgdat c141c980, node_mem_map f67cf200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2296 pages used for memmap
[ 0.000000] HighMem zone: 291514 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s28864 r0 d24384 u1048576
[ 0.000000] pcpu-alloc: s28864 r0 d24384 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517457
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-2-686-pae root=UUID=840e1ee5-5959-4889-9fde-4a9f5a79db5f ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0007f5b0)
[ 0.000000] Memory: 2061288k/2086592k available (2765k kernel code, 24844k reserved, 1473k data, 404k init, 1175240k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc1424000 - 0xc1489000 ( 404 kB)
[ 0.000000] .data : 0xc12b372c - 0xc1423b80 (1473 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12b372c (2765 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:1280
[ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.484 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.96 BogoMIPS (lpj=6649936)
[ 0.004015] pid_max: default: 32768 minimum: 301
[ 0.004122] Security Framework initialized
[ 0.004130] SELinux: Disabled at boot.
[ 0.004179] Mount-cache hash table entries: 512
[ 0.004700] Initializing cgroup subsys cpuacct
[ 0.004748] Initializing cgroup subsys memory
[ 0.004779] Initializing cgroup subsys devices
[ 0.004784] Initializing cgroup subsys freezer
[ 0.004789] Initializing cgroup subsys net_cls
[ 0.004794] Initializing cgroup subsys blkio
[ 0.004862] CPU: Physical Processor ID: 0
[ 0.004866] CPU: Processor Core ID: 0
[ 0.004872] mce: CPU supports 5 MCE banks
[ 0.004884] CPU0: Thermal monitoring handled by SMI
[ 0.004891] using mwait in idle threads.
[ 0.008514] ACPI: Core revision 20110413
[ 0.016106] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059534] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
[ 0.060003] APIC calibration not consistent with PM-Timer: 287ms instead of 100ms
[ 0.060003] APIC delta adjusted to PM-Timer: 1039058 (2992461)
[ 0.060003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.060003] ... version: 3
[ 0.060003] ... bit width: 40
[ 0.060003] ... generic registers: 2
[ 0.060003] ... value mask: 000000ffffffffff
[ 0.060003] ... max period: 000000007fffffff
[ 0.060003] ... fixed-purpose events: 3
[ 0.060003] ... event mask: 0000000700000003
[ 0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.060003] CPU 1 irqstacks, hard=f60b6000 soft=f60b8000
[ 0.060003] Booting Node 0, Processors #1 Ok.
[ 0.060003] smpboot cpu 1: start_ip = 99000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU0: Thermal monitoring enabled (TM1)
[ 0.148057] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.148132] Brought up 2 CPUs
[ 0.148140] Total of 2 processors activated (6649.96 BogoMIPS).
[ 0.148876] devtmpfs: initialized
[ 0.148876] PM: Registering ACPI NVS region at 7f5c0000 (12288 bytes)
[ 0.148876] print_constraints: dummy:
[ 0.148876] NET: Registered protocol family 16
[ 0.148876] ACPI: bus type pci registered
[ 0.149056] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
[ 0.149064] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
[ 0.149068] PCI: Using MMCONFIG for extended config space
[ 0.149073] PCI: Using configuration type 1 for base access
[ 0.149821] bio: create slab <bio-0> at 0
[ 0.154028] ACPI: EC: Look up EC in DSDT
[ 0.163346] ACPI: SSDT 7f5b9d48 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.163871] ACPI: Dynamic OEM Table Load:
[ 0.163878] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.164246] ACPI: SSDT 7f5b961e 006A5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.164717] ACPI: Dynamic OEM Table Load:
[ 0.164723] ACPI: SSDT (null) 006A5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.165321] ACPI: SSDT 7f5b9f4b 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.165816] ACPI: Dynamic OEM Table Load:
[ 0.165823] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.166047] ACPI: SSDT 7f5b9cc3 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.166518] ACPI: Dynamic OEM Table Load:
[ 0.166525] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.168424] ACPI: Interpreter enabled
[ 0.168439] ACPI: (supports S0 S3 S4 S5)
[ 0.168482] ACPI: Using IOAPIC for interrupt routing
[ 0.177014] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.177374] ACPI: No dock devices found.
[ 0.177380] HEST: Table not found.
[ 0.177389] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.181005] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143)
[ 0.181022] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f603c6f8), AE_ALREADY_EXISTS (20110413/psparse-536)
[ 0.181041] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.181057] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.184161] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.184169] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.184176] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.184183] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.184189] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.184195] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.184202] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xf7ffffff]
[ 0.184209] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
[ 0.184240] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.184296] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.184313] pci 0000:00:02.0: reg 10: [mem 0xf0300000-0xf037ffff]
[ 0.184323] pci 0000:00:02.0: reg 14: [io 0x18d0-0x18d7]
[ 0.184333] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.184344] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
[ 0.184390] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.184404] pci 0000:00:02.1: reg 10: [mem 0xf0380000-0xf03fffff]
[ 0.184519] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.184550] pci 0000:00:1b.0: reg 10: [mem 0xf0400000-0xf0403fff 64bit]
[ 0.184647] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.184656] pci 0000:00:1b.0: PME# disabled
[ 0.184694] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.184794] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.184802] pci 0000:00:1c.0: PME# disabled
[ 0.184840] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.184935] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.184943] pci 0000:00:1c.1: PME# disabled
[ 0.184987] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.185082] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.185090] pci 0000:00:1c.2: PME# disabled
[ 0.185129] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.185222] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.185230] pci 0000:00:1c.3: PME# disabled
[ 0.185272] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.185335] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.185385] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.185448] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.185499] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.185569] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.185620] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.185682] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.185750] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.185781] pci 0000:00:1d.7: reg 10: [mem 0xf0604000-0xf06043ff]
[ 0.185884] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.185892] pci 0000:00:1d.7: PME# disabled
[ 0.185923] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.186021] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.186133] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.186189] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.186218] pci 0000:00:1f.2: reg 10: [io 0x18e8-0x18ef]
[ 0.186234] pci 0000:00:1f.2: reg 14: [io 0x18dc-0x18df]
[ 0.186249] pci 0000:00:1f.2: reg 18: [io 0x18e0-0x18e7]
[ 0.186264] pci 0000:00:1f.2: reg 1c: [io 0x18d8-0x18db]
[ 0.186280] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
[ 0.186296] pci 0000:00:1f.2: reg 24: [mem 0xf0604400-0xf06047ff]
[ 0.186344] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.186352] pci 0000:00:1f.2: PME# disabled
[ 0.186380] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.186456] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.186603] pci 0000:05:00.0: [168c:002b] type 0 class 0x000280
[ 0.186640] pci 0000:05:00.0: reg 10: [mem 0xf0100000-0xf010ffff 64bit]
[ 0.186766] pci 0000:05:00.0: supports D1
[ 0.186771] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
[ 0.186780] pci 0000:05:00.0: PME# disabled
[ 0.192053] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
[ 0.192068] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.192077] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.192089] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.192161] pci 0000:00:1c.1: PCI bridge to [bus 07-07]
[ 0.192170] pci 0000:00:1c.1: bridge window [io 0x0000-0x0000] (disabled)
[ 0.192179] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.192191] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.192432] pci 0000:09:00.0: [11ab:4354] type 0 class 0x000200
[ 0.192614] pci 0000:09:00.0: reg 10: [mem 0xf0200000-0xf0203fff 64bit]
[ 0.192719] pci 0000:09:00.0: reg 18: [io 0x2000-0x20ff]
[ 0.193358] pci 0000:09:00.0: supports D1 D2
[ 0.193364] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193392] pci 0000:09:00.0: PME# disabled
[ 0.200113] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
[ 0.200122] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.200131] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.200143] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.200215] pci 0000:00:1c.3: PCI bridge to [bus 0b-0b]
[ 0.200223] pci 0000:00:1c.3: bridge window [io 0x0000-0x0000] (disabled)
[ 0.200232] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.200244] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.200339] pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
[ 0.200348] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.200357] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.200369] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.200376] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.200383] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.200390] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.200396] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.200403] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.200410] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.200417] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xf7ffffff] (subtractive decode)
[ 0.200424] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
[ 0.200467] pci_bus 0000:00: on NUMA node 0
[ 0.200476] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.200666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.200773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.200879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.200983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.201084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.201399] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143)
[ 0.201415] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f603c6f8), AE_ALREADY_EXISTS (20110413/psparse-536)
[ 0.201442] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.201586] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143)
[ 0.201601] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f603c6f8), AE_ALREADY_EXISTS (20110413/psparse-536)
[ 0.201626] pci0000:00: ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x1d
[ 0.201631] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.211714] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.211846] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.211973] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.212116] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.212248] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.212382] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.212517] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.212650] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.212890] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.212914] vgaarb: loaded
[ 0.212918] vgaarb: bridge control possible 0000:00:02.0
[ 0.213003] PCI: Using ACPI for IRQ routing
[ 0.213434] PCI: pci_cache_line_size set to 64 bytes
[ 0.213601] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.213609] reserve RAM buffer: 000000007f5b0000 - 000000007fffffff
[ 0.213867] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.213878] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.213889] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.220069] Switching to clocksource hpet
[ 0.222957] pnp: PnP ACPI init
[ 0.222993] ACPI: bus type pnp registered
[ 0.223737] Switched to NOHz mode on CPU #0
[ 0.223888] Switched to NOHz mode on CPU #1
[ 0.224642] pnp 00:00: [bus 00-3f]
[ 0.224649] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.224656] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.224662] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.224668] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.224674] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.224680] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.224686] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.224692] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.224698] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.224704] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.224710] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.224716] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.224722] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.224728] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.224734] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.224740] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.224747] pnp 00:00: [mem 0x80000000-0xf7ffffff window]
[ 0.224753] pnp 00:00: [io 0x0d00-0xfdff window]
[ 0.224759] pnp 00:00: [mem 0x00000000 window]
[ 0.224764] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.224900] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.225837] pnp 00:01: [io 0x0010-0x001f]
[ 0.225844] pnp 00:01: [io 0x0024-0x0025]
[ 0.225849] pnp 00:01: [io 0x0028-0x0029]
[ 0.225855] pnp 00:01: [io 0x002c-0x002d]
[ 0.225860] pnp 00:01: [io 0x0030-0x0031]
[ 0.225865] pnp 00:01: [io 0x0034-0x0035]
[ 0.225870] pnp 00:01: [io 0x0038-0x0039]
[ 0.225876] pnp 00:01: [io 0x003c-0x003d]
[ 0.225881] pnp 00:01: [io 0x0072-0x0077]
[ 0.225886] pnp 00:01: [io 0x0080]
[ 0.225891] pnp 00:01: [io 0x0090-0x009f]
[ 0.225897] pnp 00:01: [io 0x00a4-0x00a5]
[ 0.225902] pnp 00:01: [io 0x00a8-0x00a9]
[ 0.225907] pnp 00:01: [io 0x00ac-0x00ad]
[ 0.225912] pnp 00:01: [io 0x00b0-0x00b5]
[ 0.225918] pnp 00:01: [io 0x00b8-0x00b9]
[ 0.225923] pnp 00:01: [io 0x00bc-0x00bd]
[ 0.225928] pnp 00:01: [io 0x0800-0x080f]
[ 0.225934] pnp 00:01: [io 0x1000-0x107f]
[ 0.225939] pnp 00:01: [io 0x1180-0x11bf]
[ 0.225944] pnp 00:01: [io 0x002e-0x002f]
[ 0.225950] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.225955] pnp 00:01: [io 0xfe00]
[ 0.225960] pnp 00:01: [io 0x164e-0x174c]
[ 0.225966] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.225972] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.225977] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.225983] pnp 00:01: [mem 0xfef00000-0xfeffffff]
[ 0.226140] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.226149] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.226156] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.226163] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.226170] system 00:01: [io 0xfe00] has been reserved
[ 0.226177] system 00:01: [io 0x164e-0x174c] has been reserved
[ 0.226185] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.226193] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.226200] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.226208] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.226217] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226245] pnp 00:02: [io 0x0000-0x000f]
[ 0.226251] pnp 00:02: [io 0x0081-0x008f]
[ 0.226256] pnp 00:02: [io 0x00c0-0x00df]
[ 0.226262] pnp 00:02: [dma 4]
[ 0.226335] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.226361] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.226379] pnp 00:03: [irq 13]
[ 0.226447] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.226531] pnp 00:04: [io 0x0070-0x0071]
[ 0.226547] pnp 00:04: [irq 8]
[ 0.226618] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.226646] pnp 00:05: [io 0x0061]
[ 0.226716] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.226777] pnp 00:06: [io 0x0060]
[ 0.226783] pnp 00:06: [io 0x0064]
[ 0.226794] pnp 00:06: [irq 1]
[ 0.226870] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.226902] pnp 00:07: [irq 12]
[ 0.226979] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.227289] pnp 00:08: [mem 0xff800000-0xffffffff]
[ 0.227368] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.227818] pnp: PnP ACPI: found 9 devices
[ 0.227823] ACPI: ACPI bus type pnp unregistered
[ 0.227832] PnPBIOS: Disabled by ACPI PNP
[ 0.266642] PCI: max bus depth: 1 pci_try_num: 2
[ 0.266738] pci 0000:00:1c.3: BAR 14: assigned [mem 0x80000000-0x801fffff]
[ 0.266751] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[ 0.266764] pci 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.266775] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.266787] pci 0000:00:1c.1: BAR 14: assigned [mem 0x80600000-0x807fffff]
[ 0.266799] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
[ 0.266811] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.266823] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80a00000-0x80bfffff 64bit pref]
[ 0.266835] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.266842] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
[ 0.266850] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.266861] pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.266871] pci 0000:00:1c.0: bridge window [mem 0x80a00000-0x80bfffff 64bit pref]
[ 0.266883] pci 0000:00:1c.1: PCI bridge to [bus 07-07]
[ 0.266890] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.266901] pci 0000:00:1c.1: bridge window [mem 0x80600000-0x807fffff]
[ 0.266910] pci 0000:00:1c.1: bridge window [mem 0x80800000-0x809fffff 64bit pref]
[ 0.266922] pci 0000:00:1c.2: PCI bridge to [bus 09-09]
[ 0.266930] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.266940] pci 0000:00:1c.2: bridge window [mem 0xf0200000-0xf02fffff]
[ 0.266950] pci 0000:00:1c.2: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.266962] pci 0000:00:1c.3: PCI bridge to [bus 0b-0b]
[ 0.266969] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.266979] pci 0000:00:1c.3: bridge window [mem 0x80000000-0x801fffff]
[ 0.266988] pci 0000:00:1c.3: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[ 0.267000] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
[ 0.267005] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.267014] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.267022] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.267057] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.267067] pci 0000:00:1c.0: setting latency timer to 64
[ 0.267079] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.267092] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.267103] pci 0000:00:1c.1: setting latency timer to 64
[ 0.267120] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.267129] pci 0000:00:1c.2: setting latency timer to 64
[ 0.267140] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[ 0.267152] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.267163] pci 0000:00:1c.3: setting latency timer to 64
[ 0.267176] pci 0000:00:1e.0: setting latency timer to 64
[ 0.267184] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.267190] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.267196] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.267203] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.267209] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.267215] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.267221] pci_bus 0000:00: resource 10 [mem 0x80000000-0xf7ffffff]
[ 0.267227] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
[ 0.267234] pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
[ 0.267240] pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.267247] pci_bus 0000:05: resource 2 [mem 0x80a00000-0x80bfffff 64bit pref]
[ 0.267253] pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
[ 0.267259] pci_bus 0000:07: resource 1 [mem 0x80600000-0x807fffff]
[ 0.267266] pci_bus 0000:07: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[ 0.267272] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 0.267278] pci_bus 0000:09: resource 1 [mem 0xf0200000-0xf02fffff]
[ 0.267285] pci_bus 0000:09: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.267292] pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff]
[ 0.267298] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
[ 0.267304] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[ 0.267311] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.267317] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.267323] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.267329] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.267336] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.267342] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.267348] pci_bus 0000:11: resource 10 [mem 0x80000000-0xf7ffffff]
[ 0.267354] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
[ 0.267499] NET: Registered protocol family 2
[ 0.267700] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.268301] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.269231] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.269664] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.269670] TCP reno registered
[ 0.269679] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.269697] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.270145] NET: Registered protocol family 1
[ 0.270183] pci 0000:00:02.0: Boot video device
[ 0.270368] PCI: CLS 32 bytes, default 64
[ 0.270482] Unpacking initramfs...
[ 0.385069] Freeing initrd memory: 2296k freed
[ 0.386729] Simple Boot Flag at 0x36 set to 0x1
[ 0.387573] audit: initializing netlink socket (disabled)
[ 0.387595] type=2000 audit(1318864376.380:1): initialized
[ 0.417908] highmem bounce pool size: 64 pages
[ 0.417920] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.427191] VFS: Disk quotas dquot_6.5.2
[ 0.427360] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.427586] msgmni has been set to 1735
[ 0.428040] alg: No test for stdrng (krng)
[ 0.428127] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.428134] io scheduler noop registered
[ 0.428139] io scheduler deadline registered
[ 0.428179] io scheduler cfq registered (default)
[ 0.428364] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.428435] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.428556] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.428619] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.428735] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.428798] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.428914] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.428977] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.429324] ERST: Table is not found!
[ 0.429354] isapnp: Scanning for PnP cards...
[ 0.783138] isapnp: No Plug & Play device found
[ 0.783286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.784516] Linux agpgart interface v0.103
[ 0.784736] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 0.784945] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 0.785193] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.785411] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.785719] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.788370] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.788389] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.788671] mousedev: PS/2 mouse device common for all mice
[ 0.788952] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.788992] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.789015] cpuidle: using governor ladder
[ 0.789019] cpuidle: using governor menu
[ 0.789596] TCP cubic registered
[ 0.789705] NET: Registered protocol family 10
[ 0.791079] Mobile IPv6
[ 0.791086] NET: Registered protocol family 17
[ 0.791099] Registering the dns_resolver key type
[ 0.791139] Using IPI No-Shortcut mode
[ 0.791384] PM: Hibernation image not present or could not be loaded.
[ 0.791410] registered taskstats version 1
[ 0.796580] rtc_cmos 00:04: setting system clock to 2011-10-17 15:12:57 UTC (1318864377)
[ 0.796712] Initializing network drop monitor service
[ 0.796952] Freeing unused kernel memory: 404k freed
[ 0.797273] Write protecting the kernel text: 2768k
[ 0.797348] Write protecting the kernel read-only data: 1072k
[ 0.797353] NX-protecting the kernel data: 3376k
[ 0.822844] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.828684] udevd[48]: starting version 172
[ 0.933802] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.933812] ACPI: Thermal Zone [TZ00] (59 C)
[ 1.022531] SCSI subsystem initialized
[ 1.033405] libata version 3.00 loaded.
[ 1.035817] ahci 0000:00:1f.2: version 3.0
[ 1.035850] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.035945] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.036150] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.036163] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.036177] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.037951] scsi0 : ahci
[ 1.038295] scsi1 : ahci
[ 1.038556] scsi2 : ahci
[ 1.038821] scsi3 : ahci
[ 1.039304] ata1: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604500 irq 44
[ 1.039316] ata2: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604580 irq 44
[ 1.039326] ata3: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604600 irq 44
[ 1.039335] ata4: SATA max UDMA/133 abar m1024@0xf0604400 port 0xf0604680 irq 44
[ 1.356082] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.356137] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.356174] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.356218] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.358021] ata1.00: ATA-8: ST9320325AS, 0001SDM1, max UDMA/133
[ 1.358036] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.360245] ata1.00: configured for UDMA/133
[ 1.360551] scsi 0:0:0:0: Direct-Access ATA ST9320325AS 0001 PQ: 0 ANSI: 5
[ 1.372242] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.372482] sd 0:0:0:0: [sda] Write Protect is off
[ 1.372492] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.372598] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.384091] Refined TSC clocksource calibration: 1662.499 MHz.
[ 1.384104] Switching to clocksource tsc
[ 1.424219] sda: sda1 sda2 sda3
[ 1.425168] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.116466] PM: Starting manual resume from disk
[ 2.116475] PM: Hibernation image partition 8:3 present
[ 2.116479] PM: Looking for hibernation image.
[ 2.116843] PM: Image not found (code -22)
[ 2.116847] PM: Hibernation image not present or could not be loaded.
[ 2.135351] EXT3-fs: barriers not enabled
[ 2.147867] kjournald starting. Commit interval 5 seconds
[ 2.148012] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 3.907114] udevd[240]: starting version 172
[ 4.443166] ACPI: acpi_idle registered with cpuidle
[ 4.449678] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 4.451926] ACPI: Lid Switch [LID0]
[ 4.452207] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.452226] ACPI: Power Button [PWRB]
[ 4.452426] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 4.452441] ACPI: Sleep Button [SLPB]
[ 4.460733] ACPI: AC Adapter [ADP1] (on-line)
[ 4.466469] Monitor-Mwait will be used to enter C-1 state
[ 4.466866] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.466884] ACPI: Power Button [PWRF]
[ 4.577272] [drm] Initialized drm 1.1.0 20060810
[ 4.593160] ACPI: Battery Slot [BAT1] (battery present)
[ 4.739290] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.804352] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.834646] sky2: driver version 1.28
[ 4.834765] sky2 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.834832] sky2 0000:09:00.0: setting latency timer to 64
[ 4.834973] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[ 4.835657] sky2 0000:09:00.0: irq 45 for MSI/MSI-X
[ 4.838402] sky2 0000:09:00.0: eth0: addr 00:24:54:ae:4f:1d
[ 4.861442] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.861453] i915 0000:00:02.0: setting latency timer to 64
[ 4.912042] i915 0000:00:02.0: irq 46 for MSI/MSI-X
[ 4.912054] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.912059] [drm] Driver supports precise vblank timestamp query.
[ 4.912142] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.093946] cfg80211: Calling CRDA to update world regulatory domain
[ 5.243805] [drm] initialized overlay support
[ 5.270773] fbcon: inteldrmfb (fb0) is primary device
[ 5.327040] usbcore: registered new interface driver usbfs
[ 5.327629] usbcore: registered new interface driver hub
[ 5.327743] usbcore: registered new device driver usb
[ 5.337577] Console: switching to colour frame buffer device 128x37
[ 5.355416] fb0: inteldrmfb frame buffer device
[ 5.355424] drm: registered panic notifier
[ 5.358397] ACPI Warning: _BQC returned an invalid level (20110413/video-473)
[ 5.359103] acpi device:04: registered as cooling_device2
[ 5.359478] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 5.359628] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 5.359768] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.359874] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.359986] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 5.360111] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.447315] ath9k 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.447339] ath9k 0000:05:00.0: setting latency timer to 64
[ 5.498186] ath: EEPROM regdomain: 0x65
[ 5.498191] ath: EEPROM indicates we should expect a direct regpair map
[ 5.498198] ath: Country alpha2 being used: 00
[ 5.498202] ath: Regpair used: 0x65
[ 5.507862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.532266] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[ 5.543707] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 5.545393] Registered led device: ath9k-phy0
[ 5.545415] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8560000, irq=16
[ 5.563910] hda_codec: ALC269: BIOS auto-probing.
[ 5.567494] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.567978] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.568755] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.568798] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.568807] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.568901] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 5.568948] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 5.568971] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.572893] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.572951] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0604000
[ 5.574695] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 5.592090] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.592163] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.592174] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.592181] usb usb1: Product: EHCI Host Controller
[ 5.592187] usb usb1: Manufacturer: Linux 3.0.0-2-686-pae ehci_hcd
[ 5.592194] usb usb1: SerialNumber: 0000:00:1d.7
[ 5.592603] hub 1-0:1.0: USB hub found
[ 5.592620] hub 1-0:1.0: 8 ports detected
[ 5.615173] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.615278] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.615300] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.615310] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.615341] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 5.615395] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 5.615501] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.615510] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.615518] usb usb2: Product: UHCI Host Controller
[ 5.615525] usb usb2: Manufacturer: Linux 3.0.0-2-686-pae uhci_hcd
[ 5.615533] usb usb2: SerialNumber: 0000:00:1d.0
[ 5.615901] hub 2-0:1.0: USB hub found
[ 5.615919] hub 2-0:1.0: 2 ports detected
[ 5.616245] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.616266] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.616277] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.616316] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 5.616395] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 5.616499] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.616509] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.616517] usb usb3: Product: UHCI Host Controller
[ 5.616524] usb usb3: Manufacturer: Linux 3.0.0-2-686-pae uhci_hcd
[ 5.616531] usb usb3: SerialNumber: 0000:00:1d.1
[ 5.616885] hub 3-0:1.0: USB hub found
[ 5.616901] hub 3-0:1.0: 2 ports detected
[ 5.617108] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.617133] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.617143] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.617170] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 5.617244] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 5.617354] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.617363] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.617372] usb usb4: Product: UHCI Host Controller
[ 5.617379] usb usb4: Manufacturer: Linux 3.0.0-2-686-pae uhci_hcd
[ 5.617386] usb usb4: SerialNumber: 0000:00:1d.2
[ 5.617726] hub 4-0:1.0: USB hub found
[ 5.617743] hub 4-0:1.0: 2 ports detected
[ 5.617952] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 5.622144] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.622157] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.622198] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 5.622256] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 5.622368] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.622378] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.622386] usb usb5: Product: UHCI Host Controller
[ 5.622394] usb usb5: Manufacturer: Linux 3.0.0-2-686-pae uhci_hcd
[ 5.622401] usb usb5: SerialNumber: 0000:00:1d.3
[ 5.631030] hub 5-0:1.0: USB hub found
[ 5.631050] hub 5-0:1.0: 2 ports detected
[ 6.016096] usb 1-8: new high speed USB device number 3 using ehci_hcd
[ 6.163278] usb 1-8: New USB device found, idVendor=0ac8, idProduct=c33f
[ 6.163296] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.163303] usb 1-8: Product: WebCam SCB-0340N
[ 6.163307] usb 1-8: Manufacturer: Namuga.
[ 6.404085] usb 4-2: new full speed USB device number 2 using uhci_hcd
[ 6.579338] usb 4-2: New USB device found, idVendor=0a5c, idProduct=219b
[ 6.579349] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.579357] usb 4-2: Product: Broadcom Bluetooth 2.1 Device
[ 6.579363] usb 4-2: Manufacturer: Broadcom Corp
[ 6.579369] usb 4-2: SerialNumber: F07BCBC642FE
[ 6.655934] Linux media interface: v0.10
[ 6.686477] Bluetooth: Core ver 2.16
[ 6.686536] NET: Registered protocol family 31
[ 6.686543] Bluetooth: HCI device and connection manager initialized
[ 6.686551] Bluetooth: HCI socket layer initialized
[ 6.686557] Bluetooth: L2CAP socket layer initialized
[ 6.687105] Bluetooth: SCO socket layer initialized
[ 6.705868] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.708277] usbcore: registered new interface driver btusb
[ 6.724791] Linux video capture interface: v2.00
[ 6.771233] uvcvideo: Found UVC 1.00 device WebCam SCB-0340N (0ac8:c33f)
[ 6.773637] input: WebCam SCB-0340N as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input10
[ 6.774465] usbcore: registered new interface driver uvcvideo
[ 6.774473] USB Video Class driver (v1.1.0)
[ 8.088188] Adding 9739260k swap on /dev/sda3. Priority:-1 extents:1 across:9739260k
[ 8.552494] EXT3-fs (sda1): using internal journal
[ 8.679252] loop: module loaded
[ 10.224398] EXT3-fs: barriers not enabled
[ 10.224855] kjournald starting. Commit interval 5 seconds
[ 10.225566] EXT3-fs (sda2): using internal journal
[ 10.225575] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 11.697453] RPC: Registered named UNIX socket transport module.
[ 11.697462] RPC: Registered udp transport module.
[ 11.697467] RPC: Registered tcp transport module.
[ 11.697473] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 11.734726] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 11.772696] FS-Cache: Loaded
[ 11.809025] FS-Cache: Netfs 'nfs' registered for caching
[ 11.894761] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 12.239416] fuse init (API version 7.16)
[ 14.151423] wlan0: authenticate with 00:1d:7e:3a:4f:ca (try 1)
[ 14.152996] wlan0: authenticated
[ 14.173573] wlan0: associate with 00:1d:7e:3a:4f:ca (try 1)
[ 14.177302] wlan0: RX AssocResp from 00:1d:7e:3a:4f:ca (capab=0x431 status=0 aid=1)
[ 14.177313] wlan0: associated
[ 14.178040] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.167195] cpufreq-nforce2: No nForce2 chipset.
[ 16.314684] powernow: This module only works with AMD K7 CPUs
[ 24.672043] wlan0: no IPv6 routers present
Reply to: