Bug#640391: linux-image-3.0.0-1-686-pae: ark3116 driver regression
I have just done another run:
$ gpsbabel -w -i garmin -f /dev/ttyUSB0 -o gpx -F test.gpx
[ERROR] GPS_Packet_Read: Timeout. No data received.
GARMIN:Can't init /dev/ttyUSB0
The dmesg output for this test was as before:
----------------------------------------------------------------
[ 3219.397130] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting bps to 9600
[ 3219.397144] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting hcr:0x00,lcr:0x13,quot:313
[ 3219.398612] usb 2-1: ark3116: don't know how to do software flow control
[ 3219.405693] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting bps to 9600
[ 3219.405718] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_set_termios - setting hcr:0x00,lcr:0x13,quot:313
[ 3223.865457] /build/buildd-linux-2.6_3.0.0-3-i386-G7H4XL/linux-2.6-3.0.0/debian/build/source_i386_none/drivers/usb/serial/ark3116.c: ark3116_read_int_callback - urb shutting down with status: -2
----------------------------------------------------------------------------
Otherwise, on the module load (before the test), just:
[ 3152.500579] USB Serial support registered for ark3116
[ 3152.501577] usbcore: registered new interface driver ark3116
[ 3152.501588] ark3116:v0.6:USB ARK3116 serial/IrDA driver
[ 3155.956189] usb 2-1: new full speed USB device number 3 using uhci_hcd
[ 3156.115248] usb 2-1: New USB device found, idVendor=6547, idProduct=0232
[ 3156.115269] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 3156.115283] usb 2-1: Product: USB-UART Controller
[ 3156.115294] usb 2-1: Manufacturer: ArkMicroChips
[ 3156.119333] ark3116 2-1:1.0: ark3116 converter detected
[ 3156.130227] usb 2-1: ark3116 using RS232 mode
[ 3156.130611] usb 2-1: ark3116 converter now attached to ttyUSB0
Hope something here gives a clue...
ael
Reply to: