Bug#641396: linux-image-686: sandforce ssd freezes after sleeping
Package: linux-image-686
Severity: important
Hello,
i'm using a Macbook 3.1 with an OCZ Vertex 2 (sandforce 1200 i guess?). Afer
suspending to ram the disk freezes.
dmesg:
[ 321.894260] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 321.894270] ata3.00: BMDMA stat 0x6
[ 321.894278] ata3.00: failed command: READ DMA
[ 321.894293] ata3.00: cmd c8/00:00:40:29:99/00:00:00:00:00/ec tag 0 dma
131072 in
[ 321.894296] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30
(host bus error)
[ 321.894304] ata3.00: status: { DRDY ERR }
[ 321.894309] ata3.00: error: { ICRC ABRT }
[ 321.894332] ata3: soft resetting link
[ 322.160582] ata3.00: configured for UDMA/133
[ 322.160610] ata3: EH complete
This only happens after sleep/wake up. The disk isn't broken, works fine under
OSX.
I also opend a kernel bug:
https://bugzilla.kernel.org/show_bug.cgi?id=41022
-- System Information:
Debian Release: 6.0.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-35squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:51:05 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bdcf4000 (usable)
[ 0.000000] BIOS-e820: 00000000bdcf4000 - 00000000bdef5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdef5000 - 00000000beec2000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000beec2000 - 00000000beec4000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000beec4000 - 00000000beec7000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000beec7000 - 00000000beeca000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000beeca000 - 00000000beecb000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000beecb000 - 00000000beedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000beedf000 - 00000000beef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000beef9000 - 00000000beeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000beeff000 - 00000000bef00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bef00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbdcf4 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 0BF000000 mask FFF000000 uncachable
[ 0.000000] 5 base 0BEF00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 377af000 - 37fefec2
[ 0.000000] Allocated new RAMDISK: 00100000 - 00940ec2
[ 0.000000] Move RAMDISK from 00000000377af000 - 0000000037fefec1 to 00100000 - 00940ec1
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT beeee1c0 00084 (v01 APPLE Apple00 0000008E 01000013)
[ 0.000000] ACPI: FACP beeec000 000F4 (v03 APPLE Apple00 0000008E Loki 0000005F)
[ 0.000000] ACPI: DSDT beee1000 045B6 (v01 APPLE MacBook 00030001 INTL 20061109)
[ 0.000000] ACPI: FACS beecb000 00040
[ 0.000000] ACPI: HPET beeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC beeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG beee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! beee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST beee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT beee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT beec6000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT beec5000 0025F (v01 APPLE Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT beec4000 000A6 (v01 APPLE Cpu1Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT beee0000 00544 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT beedf000 00477 (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2152MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ccbd4] TEXT DATA BSS ==> [0001000000 - 00014ccbd4]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00014cd000 - 00014d31c9] BRK ==> [00014cd000 - 00014d31c9]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 0000940ec2] NEW RAMDISK ==> [0000100000 - 0000940ec2]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x000bdcf4
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bdcf4
[ 0.000000] On node 0 totalpages: 777363
[ 0.000000] free_area_init_node: node 0, pgdat c13b4860, node_mem_map c14d5000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4306 pages used for memmap
[ 0.000000] HighMem zone: 546852 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34328 r0 d23016 u2097152
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 771289
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=b03f2853-9b66-4ca1-8ce3-474d1682d08d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:000bdcf4)
[ 0.000000] Memory: 3069724k/3109840k available (2503k kernel code, 38724k reserved, 1329k data, 380k init, 2204632k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bf000 - 0xc141e000 ( 380 kB)
[ 0.000000] .data : 0xc1271d79 - 0xc13be480 (1329 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1271d79 (2503 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2194.496 MHz processor.
[ 0.016006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4388.99 BogoMIPS (lpj=8777984)
[ 0.016019] Security Framework initialized
[ 0.016024] SELinux: Disabled at boot.
[ 0.016029] Mount-cache hash table entries: 512
[ 0.016137] Initializing cgroup subsys ns
[ 0.016140] Initializing cgroup subsys cpuacct
[ 0.016144] Initializing cgroup subsys devices
[ 0.016146] Initializing cgroup subsys freezer
[ 0.016147] Initializing cgroup subsys net_cls
[ 0.016168] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.016170] CPU: L2 cache: 4096K
[ 0.016172] CPU: Physical Processor ID: 0
[ 0.016174] CPU: Processor Core ID: 0
[ 0.016177] mce: CPU supports 6 MCE banks
[ 0.016184] CPU0: Thermal monitoring enabled (TM2)
[ 0.016187] using mwait in idle threads.
[ 0.016193] Performance Events: Core2 events, Intel PMU driver.
[ 0.016199] ... version: 2
[ 0.016201] ... bit width: 40
[ 0.016202] ... generic registers: 2
[ 0.016204] ... value mask: 000000ffffffffff
[ 0.016205] ... max period: 000000007fffffff
[ 0.016207] ... fixed-purpose events: 3
[ 0.016208] ... event mask: 0000000700000003
[ 0.016212] Checking 'hlt' instruction... OK.
[ 0.033036] ACPI: Core revision 20090903
[ 0.038318] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.038672] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078458] CPU0: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.020000] Initializing CPU#1
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 4096K
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 1
[ 0.020000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164028] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[ 0.164036] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168045] Brought up 2 CPUs
[ 0.168048] Total of 2 processors activated (8777.95 BogoMIPS).
[ 0.169137] CPU0 attaching sched-domain:
[ 0.169140] domain 0: span 0-1 level MC
[ 0.169142] groups: 0 1
[ 0.169147] CPU1 attaching sched-domain:
[ 0.169149] domain 0: span 0-1 level MC
[ 0.169151] groups: 1 0
[ 0.169198] devtmpfs: initialized
[ 0.169198] regulator: core version 0.5
[ 0.169198] NET: Registered protocol family 16
[ 0.169198] ACPI: bus type pci registered
[ 0.169198] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
[ 0.169198] PCI: MCFG area at f0000000 reserved in E820
[ 0.169198] PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.169198] PCI: Using MMCONFIG for extended config space
[ 0.169198] PCI: Using configuration type 1 for base access
[ 0.169198] bio: create slab <bio-0> at 0
[ 0.169198] ACPI: EC: EC description table is found, configuring boot EC
[ 0.172629] ACPI: BIOS _OSI(Linux) query ignored
[ 0.172883] ACPI: Interpreter enabled
[ 0.172887] ACPI: (supports S0 S3 S4 S5)
[ 0.172904] ACPI: Using IOAPIC for interrupt routing
[ 0.180217] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.180483] ACPI: No dock devices found.
[ 0.181099] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.181179] pci 0000:00:02.0: reg 10 64bit mmio: [0xd0100000-0xd01fffff]
[ 0.181187] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.181192] pci 0000:00:02.0: reg 20 io port: [0x3110-0x3117]
[ 0.181229] pci 0000:00:02.1: reg 10 64bit mmio: [0xd0200000-0xd02fffff]
[ 0.181340] pci 0000:00:1a.0: reg 20 io port: [0x30c0-0x30df]
[ 0.181407] pci 0000:00:1a.1: reg 20 io port: [0x30a0-0x30bf]
[ 0.181478] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd0704c00-0xd0704fff]
[ 0.181543] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.181549] pci 0000:00:1a.7: PME# disabled
[ 0.181603] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd0700000-0xd0703fff]
[ 0.181666] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.181671] pci 0000:00:1b.0: PME# disabled
[ 0.181765] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.181770] pci 0000:00:1c.0: PME# disabled
[ 0.181872] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.181876] pci 0000:00:1c.4: PME# disabled
[ 0.181974] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.181978] pci 0000:00:1c.5: PME# disabled
[ 0.182042] pci 0000:00:1d.0: reg 20 io port: [0x3080-0x309f]
[ 0.182108] pci 0000:00:1d.1: reg 20 io port: [0x3060-0x307f]
[ 0.182175] pci 0000:00:1d.2: reg 20 io port: [0x3040-0x305f]
[ 0.184051] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0704800-0xd0704bff]
[ 0.184114] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.184120] pci 0000:00:1d.7: PME# disabled
[ 0.184304] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 0.184308] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
[ 0.184314] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
[ 0.184367] pci 0000:00:1f.1: reg 10 io port: [0x3108-0x310f]
[ 0.184375] pci 0000:00:1f.1: reg 14 io port: [0x3124-0x3127]
[ 0.184383] pci 0000:00:1f.1: reg 18 io port: [0x3100-0x3107]
[ 0.184391] pci 0000:00:1f.1: reg 1c io port: [0x3120-0x3123]
[ 0.184399] pci 0000:00:1f.1: reg 20 io port: [0x30e0-0x30ef]
[ 0.184457] pci 0000:00:1f.2: reg 10 io port: [0x30f8-0x30ff]
[ 0.184464] pci 0000:00:1f.2: reg 14 io port: [0x311c-0x311f]
[ 0.184472] pci 0000:00:1f.2: reg 18 io port: [0x30f0-0x30f7]
[ 0.184480] pci 0000:00:1f.2: reg 1c io port: [0x3118-0x311b]
[ 0.184489] pci 0000:00:1f.2: reg 20 io port: [0x3020-0x302f]
[ 0.184497] pci 0000:00:1f.2: reg 24 io port: [0x4000-0x400f]
[ 0.184527] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.184531] pci 0000:00:1f.2: PME# disabled
[ 0.184559] pci 0000:00:1f.3: reg 10 32bit mmio: [0xd0705000-0xd07050ff]
[ 0.184584] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
[ 0.184675] pci 0000:00:1c.0: bridge 32bit mmio: [0xd0600000-0xd06fffff]
[ 0.184762] pci 0000:02:00.0: reg 10 64bit mmio: [0xd0500000-0xd0503fff]
[ 0.184781] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xd0000000-0xd00fffff]
[ 0.184863] pci 0000:02:00.0: supports D1 D2
[ 0.184865] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.184871] pci 0000:02:00.0: PME# disabled
[ 0.192133] pci 0000:00:1c.4: bridge 32bit mmio: [0xd0500000-0xd05fffff]
[ 0.192141] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xd0000000-0xd00fffff]
[ 0.192530] pci 0000:03:00.0: reg 10 64bit mmio: [0xd0400000-0xd0403fff]
[ 0.192578] pci 0000:03:00.0: reg 18 io port: [0x2000-0x20ff]
[ 0.192778] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfffe0000-0xffffffff]
[ 0.193069] pci 0000:03:00.0: supports D1 D2
[ 0.193071] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193089] pci 0000:03:00.0: PME# disabled
[ 0.200448] pci 0000:00:1c.5: bridge io port: [0x2000-0x2fff]
[ 0.200453] pci 0000:00:1c.5: bridge 32bit mmio: [0xd0400000-0xd04fffff]
[ 0.200509] pci 0000:04:03.0: reg 10 32bit mmio: [0xd0300000-0xd0300fff]
[ 0.200573] pci 0000:04:03.0: supports D1 D2
[ 0.200575] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.200580] pci 0000:04:03.0: PME# disabled
[ 0.200647] pci 0000:00:1e.0: transparent bridge
[ 0.200655] pci 0000:00:1e.0: bridge 32bit mmio: [0xd0300000-0xd03fffff]
[ 0.200688] pci_bus 0000:00: on NUMA node 0
[ 0.200692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.200866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.200929] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.201011] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.208611] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.208693] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.208773] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.208852] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.208931] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.209010] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *9
[ 0.209089] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.209168] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.209244] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.209256] vgaarb: loaded
[ 0.209268] PCI: Using ACPI for IRQ routing
[ 0.209268] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.209268] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.209268] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.212015] Switching to clocksource tsc
[ 0.213139] pnp: PnP ACPI init
[ 0.213146] ACPI: bus type pnp registered
[ 0.218994] pnp: PnP ACPI: found 9 devices
[ 0.218996] ACPI: ACPI bus type pnp unregistered
[ 0.218999] PnPBIOS: Disabled by ACPI PNP
[ 0.219007] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.219010] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.219013] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.219016] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.219019] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.219021] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.219024] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.219030] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.219036] system 00:07: ioport range 0x680-0x69f has been reserved
[ 0.219039] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.219041] system 00:07: ioport range 0x810-0x817 has been reserved
[ 0.219044] system 00:07: ioport range 0x400-0x47f has been reserved
[ 0.219047] system 00:07: ioport range 0x500-0x53f has been reserved
[ 0.219049] system 00:07: ioport range 0x1640-0x164f has been reserved
[ 0.253726] pci 0000:03:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
[ 0.253827] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.253831] pci 0000:00:1c.0: IO window: 0x5000-0x5fff
[ 0.253837] pci 0000:00:1c.0: MEM window: 0xd0600000-0xd06fffff
[ 0.253842] pci 0000:00:1c.0: PREFETCH window: 0x000000d0800000-0x000000d09fffff
[ 0.253850] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
[ 0.253854] pci 0000:00:1c.4: IO window: 0x6000-0x6fff
[ 0.253860] pci 0000:00:1c.4: MEM window: 0xd0500000-0xd05fffff
[ 0.253865] pci 0000:00:1c.4: PREFETCH window: 0x000000d0000000-0x000000d00fffff
[ 0.253874] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:03
[ 0.253877] pci 0000:00:1c.5: IO window: 0x2000-0x2fff
[ 0.253884] pci 0000:00:1c.5: MEM window: 0xd0400000-0xd04fffff
[ 0.253889] pci 0000:00:1c.5: PREFETCH window: 0xd0a00000-0xd0bfffff
[ 0.253897] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.253899] pci 0000:00:1e.0: IO window: disabled
[ 0.253905] pci 0000:00:1e.0: MEM window: 0xd0300000-0xd03fffff
[ 0.253910] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.253925] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.253931] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.253938] pci 0000:00:1c.0: setting latency timer to 64
[ 0.253948] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.253953] pci 0000:00:1c.4: setting latency timer to 64
[ 0.253964] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.253969] pci 0000:00:1c.5: setting latency timer to 64
[ 0.254020] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.254063] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 0.254070] pci 0000:00:1e.0: setting latency timer to 64
[ 0.254074] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.254076] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.254079] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff]
[ 0.254081] pci_bus 0000:01: resource 1 mem: [0xd0600000-0xd06fffff]
[ 0.254084] pci_bus 0000:01: resource 2 pref mem [0xd0800000-0xd09fffff]
[ 0.254086] pci_bus 0000:02: resource 0 io: [0x6000-0x6fff]
[ 0.254088] pci_bus 0000:02: resource 1 mem: [0xd0500000-0xd05fffff]
[ 0.254091] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd00fffff]
[ 0.254093] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
[ 0.254095] pci_bus 0000:03: resource 1 mem: [0xd0400000-0xd04fffff]
[ 0.254098] pci_bus 0000:03: resource 2 pref mem [0xd0a00000-0xd0bfffff]
[ 0.254100] pci_bus 0000:04: resource 1 mem: [0xd0300000-0xd03fffff]
[ 0.254102] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.254105] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff]
[ 0.254127] NET: Registered protocol family 2
[ 0.254190] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.254426] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.254748] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.254922] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.254924] TCP reno registered
[ 0.254976] NET: Registered protocol family 1
[ 0.254990] pci 0000:00:02.0: Boot video device
[ 0.255150] Unpacking initramfs...
[ 0.471770] Freeing initrd memory: 8451k freed
[ 0.476495] audit: initializing netlink socket (disabled)
[ 0.476508] type=2000 audit(1315859083.475:1): initialized
[ 0.479742] highmem bounce pool size: 64 pages
[ 0.479747] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.481002] VFS: Disk quotas dquot_6.5.2
[ 0.481051] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.481115] msgmni has been set to 1708
[ 0.481278] alg: No test for stdrng (krng)
[ 0.481322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.481324] io scheduler noop registered
[ 0.481326] io scheduler anticipatory registered
[ 0.481328] io scheduler deadline registered
[ 0.481361] io scheduler cfq registered (default)
[ 0.481503] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.481515] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.481672] pcieport 0000:00:1c.4: irq 25 for MSI/MSI-X
[ 0.481683] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.481842] pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
[ 0.481853] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.481994] efifb: dmi detected MacBook3,1 - framebuffer at 80000000 (1280x800, stride 8192)
[ 0.482034] isapnp: Scanning for PnP cards...
[ 0.835993] isapnp: No Plug & Play device found
[ 0.837189] Linux agpgart interface v0.103
[ 0.837253] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.838457] agpgart-intel 0000:00:00.0: detected 15868K stolen memory
[ 0.843104] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.843166] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.843517] PNP: No PS/2 controller found. Probing ports directly.
[ 0.844400] i8042.c: No controller found.
[ 0.844488] mice: PS/2 mouse device common for all mice
[ 0.844532] rtc_cmos 00:08: RTC can wake from S4
[ 0.844563] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.844597] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.844605] cpuidle: using governor ladder
[ 0.844607] cpuidle: using governor menu
[ 0.844610] No iBFT detected.
[ 0.844903] TCP cubic registered
[ 0.845027] NET: Registered protocol family 10
[ 0.845645] Mobile IPv6
[ 0.845648] NET: Registered protocol family 17
[ 0.845660] Using IPI No-Shortcut mode
[ 0.845713] PM: Resume from disk failed.
[ 0.845722] registered taskstats version 1
[ 0.846372] rtc_cmos 00:08: setting system clock to 2011-09-12 20:24:44 UTC (1315859084)
[ 0.846445] Initalizing network drop monitor service
[ 0.846462] Freeing unused kernel memory: 380k freed
[ 0.846605] Write protecting the kernel text: 2504k
[ 0.846624] Write protecting the kernel read-only data: 924k
[ 0.860234] udev[56]: starting version 164
[ 0.962361] usbcore: registered new interface driver usbfs
[ 0.962407] usbcore: registered new interface driver hub
[ 0.962453] usbcore: registered new device driver usb
[ 0.976261] SCSI subsystem initialized
[ 0.977869] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.977906] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.977922] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.977926] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.977943] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.977979] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.981875] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.987869] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xd0704c00
[ 0.994765] libata version 3.00 loaded.
[ 0.998346] sky2 driver version 1.28
[ 0.998409] sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.998446] sky2 0000:03:00.0: setting latency timer to 64
[ 0.998512] sky2 0000:03:00.0: Yukon-2 EC Ultra chip revision 3
[ 0.999090] sky2 0000:03:00.0: irq 27 for MSI/MSI-X
[ 0.999828] sky2 eth0: addr 00:1b:63:b3:a4:b8
[ 0.999903] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.999921] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.999923] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.999925] usb usb1: Product: EHCI Host Controller
[ 0.999927] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 0.999929] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.999996] usb usb1: configuration #1 chosen from 1 choice
[ 1.000022] hub 1-0:1.0: USB hub found
[ 1.000028] hub 1-0:1.0: 4 ports detected
[ 1.000083] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 1.000095] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.000098] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.000105] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.000136] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.004033] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.007650] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0704800
[ 1.010295] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.010338] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.019870] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.019887] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.019890] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.019892] usb usb2: Product: EHCI Host Controller
[ 1.019894] usb usb2: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.019896] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.019956] usb usb2: configuration #1 chosen from 1 choice
[ 1.019983] hub 2-0:1.0: USB hub found
[ 1.019988] hub 2-0:1.0: 6 ports detected
[ 1.022023] ata_piix 0000:00:1f.1: version 2.13
[ 1.022080] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.022110] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 1.022116] ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.022150] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.022212] scsi0 : ata_piix
[ 1.022331] scsi1 : ata_piix
[ 1.022556] b43-pci-bridge 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.022565] b43-pci-bridge 0000:02:00.0: setting latency timer to 64
[ 1.022785] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x30e0 irq 14
[ 1.022787] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x30e8 irq 15
[ 1.022805] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.022811] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.022814] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.022822] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.022850] uhci_hcd 0000:00:1a.0: irq 20, io base 0x000030c0
[ 1.022881] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.022884] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.022886] usb usb3: Product: UHCI Host Controller
[ 1.022887] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.022889] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.022946] usb usb3: configuration #1 chosen from 1 choice
[ 1.022974] hub 3-0:1.0: USB hub found
[ 1.022980] hub 3-0:1.0: 2 ports detected
[ 1.023129] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.023135] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
[ 1.023169] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.023217] scsi2 : ata_piix
[ 1.023261] scsi3 : ata_piix
[ 1.023978] ata3: SATA max UDMA/133 cmd 0x30f8 ctl 0x311c bmdma 0x3020 irq 18
[ 1.023980] ata4: SATA max UDMA/133 cmd 0x30f0 ctl 0x3118 bmdma 0x3028 irq 18
[ 1.024018] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.024027] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.024031] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.024038] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.024075] uhci_hcd 0000:00:1a.1: irq 16, io base 0x000030a0
[ 1.024106] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.024108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.024110] usb usb4: Product: UHCI Host Controller
[ 1.024112] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.024114] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.024172] usb usb4: configuration #1 chosen from 1 choice
[ 1.024197] hub 4-0:1.0: USB hub found
[ 1.024202] hub 4-0:1.0: 2 ports detected
[ 1.024251] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.024258] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.024261] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.024267] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.024294] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080
[ 1.024322] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.024325] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.024327] usb usb5: Product: UHCI Host Controller
[ 1.024329] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.024331] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.024382] usb usb5: configuration #1 chosen from 1 choice
[ 1.024412] hub 5-0:1.0: USB hub found
[ 1.024417] hub 5-0:1.0: 2 ports detected
[ 1.024458] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.024464] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.024467] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.024473] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.024500] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060
[ 1.024530] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.024533] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.024535] usb usb6: Product: UHCI Host Controller
[ 1.024536] usb usb6: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.024538] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.024589] usb usb6: configuration #1 chosen from 1 choice
[ 1.024612] hub 6-0:1.0: USB hub found
[ 1.024617] hub 6-0:1.0: 2 ports detected
[ 1.024660] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 1.024668] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.024673] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.024681] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.024707] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00003040
[ 1.024737] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.024739] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.024741] usb usb7: Product: UHCI Host Controller
[ 1.024743] usb usb7: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 1.024745] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.024796] usb usb7: configuration #1 chosen from 1 choice
[ 1.024820] hub 7-0:1.0: USB hub found
[ 1.024827] hub 7-0:1.0: 2 ports detected
[ 1.084009] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.0
[ 1.085060] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
[ 1.187653] ata1.00: ATAPI: HL-DT-ST DVDRW GSA-S10N, BP10, max UDMA/33
[ 1.208249] ata1.00: configured for UDMA/33
[ 1.208561] ata3.00: ATA-8: OCZ-VERTEX2, 1.33, max UDMA/133
[ 1.208564] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.217342] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRW GSA-S10N BP10 PQ: 0 ANSI: 5
[ 1.225276] ata3.00: configured for UDMA/133
[ 1.225342] scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.33 PQ: 0 ANSI: 5
[ 1.240605] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 1.240608] Uniform CD-ROM driver Revision: 3.20
[ 1.240684] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.241056] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.241102] sd 2:0:0:0: [sda] Write Protect is off
[ 1.241105] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.241124] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.241269] sda: sda1 sda2 sda3 sda4
[ 1.243522] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.245431] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.245755] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.448343] PM: Starting manual resume from disk
[ 1.448347] PM: Resume from partition 8:3
[ 1.448348] PM: Checking hibernation image.
[ 1.448530] PM: Error -22 checking image file
[ 1.448532] PM: Resume from disk failed.
[ 1.470032] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 1.540028] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 1.581071] firewire_core: created device fw0: GUID 001e52fffe3db702, S400
[ 1.652558] udev[436]: starting version 164
[ 1.673824] usb 2-4: New USB device found, idVendor=05ac, idProduct=8501
[ 1.673827] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.673830] usb 2-4: Product: Built-in iSight
[ 1.673831] usb 2-4: Manufacturer: Micron
[ 1.673895] usb 2-4: configuration #1 chosen from 1 choice
[ 1.757572] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.757639] ACPI: Lid Switch [LID0]
[ 1.757689] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.757693] ACPI: Power Button [PWRB]
[ 1.757738] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 1.757741] ACPI: Sleep Button [SLPB]
[ 1.758828] ACPI: SSDT beec9a98 002FE (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 1.762442] ACPI: SSDT beec7c98 00222 (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 1.771591] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 1.777748] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 1.777753] ACPI: I/O resource 0000:00:1f.3 [0xefa0-0xefbf] conflicts with ACPI region SMBI [0xefa0-0xefaf]
[ 1.777811] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.778435] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.778485] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.781642] mbp_nvidia_bl: MacBook 3,1 detected
[ 1.822888] Monitor-Mwait will be used to enter C-1 state
[ 1.835705] Monitor-Mwait will be used to enter C-2 state
[ 1.837880] Monitor-Mwait will be used to enter C-3 state
[ 1.837889] Marking TSC unstable due to TSC halts in idle
[ 1.838000] processor LNXCPU:00: registered as cooling_device0
[ 1.838150] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 1.838180] ACPI: Power Button [PWRF]
[ 1.838605] ACPI: SSDT beec8f18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 1.838853] ACPI: SSDT beec7f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 1.845420] processor LNXCPU:01: registered as cooling_device1
[ 1.845660] Switching to clocksource hpet
[ 1.881211] ACPI: Battery Slot [BAT0] (battery present)
[ 1.881827] ACPI: AC Adapter [ADP1] (on-line)
[ 1.907445] [drm] Initialized drm 1.1.0 20060810
[ 1.917205] applesmc: Apple MacBook (v3) detected:
[ 1.917208] applesmc: - Model with accelerometer
[ 1.917209] applesmc: - Model without light sensors and backlight
[ 1.917211] applesmc: - Model with 10 temperature sensors
[ 1.918236] applesmc: device has already been initialized (0xe0, 0xf8).
[ 1.918238] applesmc: device successfully initialized.
[ 1.918860] applesmc: 1 fans found.
[ 1.920902] input: applesmc as /devices/platform/applesmc.768/input/input6
[ 1.920953] applesmc: driver successfully loaded.
[ 1.942362] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.942367] i915 0000:00:02.0: setting latency timer to 64
[ 1.948857] i915 0000:00:02.0: irq 28 for MSI/MSI-X
[ 1.948871] [drm] set up 15M of stolen space
[ 2.080031] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 2.261899] usb 3-1: New USB device found, idVendor=05ac, idProduct=1000
[ 2.261902] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.261967] usb 3-1: configuration #1 chosen from 1 choice
[ 2.402515] [drm] initialized overlay support
[ 2.505033] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.673355] usb 5-1: New USB device found, idVendor=045e, idProduct=0745
[ 2.673360] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.673364] usb 5-1: Product: Microsoft® Nano Transceiver v1.0
[ 2.673368] usb 5-1: Manufacturer: Microsoft
[ 2.673460] usb 5-1: configuration #1 chosen from 1 choice
[ 2.687451] usbcore: registered new interface driver hiddev
[ 2.693914] generic-usb: probe of 0003:05AC:1000.0001 failed with error -71
[ 2.693955] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 2.697739] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input7
[ 2.697830] generic-usb 0003:045E:0745.0002: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1d.0-1/input0
[ 2.705155] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.1/input/input8
[ 2.705227] generic-usb 0003:045E:0745.0003: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1d.0-1/input1
[ 2.735539] input: Microsoft Microsoft® Nano Transceiver v1.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.2/input/input9
[ 2.735650] generic-usb 0003:045E:0745.0004: input,hiddev0,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v1.0] on usb-0000:00:1d.0-1/input2
[ 2.735668] usbcore: registered new interface driver usbhid
[ 2.735670] usbhid: v2.6:USB HID core driver
[ 2.916112] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 3.092837] Console: switching to colour frame buffer device 160x50
[ 3.093760] usb 7-1: New USB device found, idVendor=05ac, idProduct=8242
[ 3.093762] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.093764] usb 7-1: Product: IR Receiver
[ 3.093766] usb 7-1: Manufacturer: Apple Computer, Inc.
[ 3.093832] usb 7-1: configuration #1 chosen from 1 choice
[ 3.097105] fb0: inteldrmfb frame buffer device
[ 3.097107] registered panic notifier
[ 3.097114] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.097167] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.097199] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.131915] apple 0003:05AC:8242.0005: hiddev1,hidraw3: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-1/input0
[ 3.172674] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 3.344107] usb 7-2: new full speed USB device using uhci_hcd and address 3
[ 3.530771] usb 7-2: New USB device found, idVendor=05ac, idProduct=022a
[ 3.530776] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.530780] usb 7-2: Product: Apple Internal Keyboard / Trackpad
[ 3.530784] usb 7-2: Manufacturer: Apple Computer
[ 3.530902] usb 7-2: configuration #1 chosen from 1 choice
[ 3.540110] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input11
[ 3.540169] apple 0003:05AC:022A.0006: input,hidraw4: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input0
[ 3.547854] input: Apple Computer Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.2/input/input12
[ 3.547947] apple 0003:05AC:022A.0007: input,hidraw5: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.2-2/input2
[ 3.556748] appletouch: Geyser mode initialized.
[ 3.556804] input: appletouch as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input13
[ 3.556873] usbcore: registered new interface driver appletouch
[ 3.784153] usb 3-1: USB disconnect, address 2
[ 3.876143] Adding 524280k swap on /dev/sda3. Priority:-1 extents:1 across:524280k SS
[ 3.926046] loop: module loaded
[ 4.025107] usb 3-1: new full speed USB device using uhci_hcd and address 3
[ 4.109316] fuse init (API version 7.13)
[ 4.218909] usb 3-1: New USB device found, idVendor=05ac, idProduct=8205
[ 4.218912] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.218995] usb 3-1: configuration #1 chosen from 1 choice
[ 4.237827] Bluetooth: Core ver 2.15
[ 4.237863] NET: Registered protocol family 31
[ 4.237865] Bluetooth: HCI device and connection manager initialized
[ 4.237867] Bluetooth: HCI socket layer initialized
[ 4.240178] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 4.241035] usbcore: registered new interface driver btusb
[ 4.303337] apm: BIOS not found.
[ 4.439349] Bluetooth: L2CAP ver 2.14
[ 4.439351] Bluetooth: L2CAP socket layer initialized
[ 4.445846] Bluetooth: RFCOMM TTY layer initialized
[ 4.445850] Bluetooth: RFCOMM socket layer initialized
[ 4.445852] Bluetooth: RFCOMM ver 1.11
[ 4.455060] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.455064] Bluetooth: BNEP filters: protocol multicast
[ 4.467389] Bridge firewalling registered
[ 4.484202] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.484204] Bluetooth: SCO socket layer initialized
[ 4.520968] lp: driver loaded but no devices found
[ 4.528612] sky2 eth0: enabling interface
[ 4.528910] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.533689] ppdev: user-space parallel port driver
[ 5.263309] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[ 259.353138] CE: hpet increasing min_delta_ns to 15000 nsec
[ 297.365130] sky2 eth0: disabling interface
[ 297.483041] PM: Syncing filesystems ... done.
[ 297.498748] PM: Preparing system for mem sleep
[ 297.840253] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 297.840746] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 297.840785] PM: Entering mem sleep
[ 297.840794] Suspending console(s) (use no_console_suspend to debug)
[ 297.842945] btusb_intr_complete: hci0 urb f6156180 failed to resubmit (1)
[ 297.843947] btusb_bulk_complete: hci0 urb f6156280 failed to resubmit (1)
[ 297.844942] btusb_bulk_complete: hci0 urb f6156200 failed to resubmit (1)
[ 297.924131] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 297.924249] sd 2:0:0:0: [sda] Stopping disk
[ 297.951760] ACPI handle has no context!
[ 297.980238] b43-pci-bridge 0000:02:00.0: PCI INT A disabled
[ 297.996200] pci 0000:00:1f.3: PCI INT C disabled
[ 297.996431] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 298.012402] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 298.012562] ata_piix 0000:00:1f.1: power state changed by ACPI to D3
[ 298.012575] ehci_hcd 0000:00:1d.7: PCI INT D disabled
[ 298.012589] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 298.012600] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 298.012611] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 298.116211] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 298.132130] ehci_hcd 0000:00:1a.7: PCI INT C disabled
[ 298.132147] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[ 298.132163] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[ 298.209042] ACPI: Preparing to enter system sleep state S3
[ 298.221216] Disabling non-boot CPUs ...
[ 298.221228] CPU0 attaching NULL sched-domain.
[ 298.221231] CPU1 attaching NULL sched-domain.
[ 298.269014] CPU0 attaching NULL sched-domain.
[ 298.372039] CPU 1 is now offline
[ 298.372041] SMP alternatives: switching to UP code
[ 298.376537] Extended CMOS year: 2000
[ 298.376537] Back to C!
[ 298.376537] CPU0: Thermal monitoring enabled (TM2)
[ 298.376537] Extended CMOS year: 2000
[ 298.376537] Enabling non-boot CPUs ...
[ 298.376537] SMP alternatives: switching to SMP code
[ 298.380809] Booting processor 1 APIC 0x1 ip 0x6000
[ 298.380013] Initializing CPU#1
[ 298.380013] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 298.380013] CPU: L2 cache: 4096K
[ 298.380013] CPU: Physical Processor ID: 0
[ 298.380013] CPU: Processor Core ID: 1
[ 298.380013] CPU1: Thermal monitoring enabled (TM2)
[ 298.468077] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[ 298.468119] CPU0 attaching NULL sched-domain.
[ 298.496016] CPU0 attaching sched-domain:
[ 298.496019] domain 0: span 0-1 level MC
[ 298.496021] groups: 0 1
[ 298.496025] CPU1 attaching sched-domain:
[ 298.496026] domain 0: span 0-1 level MC
[ 298.496028] groups: 1 0
[ 298.496386] CPU1 is up
[ 298.497454] ACPI: Waking up from system sleep state S3
[ 298.744096] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 298.744103] i915 0000:00:02.0: restoring config space at offset 0x8 (was 0x1, writing 0x3111)
[ 298.744108] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
[ 298.744113] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[ 298.744136] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x4, writing 0xd0200004)
[ 298.744141] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 298.744151] uhci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 298.744165] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x8 (was 0x1, writing 0x30c1)
[ 298.744179] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 298.744190] uhci_hcd 0000:00:1a.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 298.744204] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x8 (was 0x1, writing 0x30a1)
[ 298.744218] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 298.744238] ehci_hcd 0000:00:1a.7: restoring config space at offset 0xf (was 0x300, writing 0x309)
[ 298.744258] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x4 (was 0x0, writing 0xd0704c00)
[ 298.744267] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 298.744298] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 298.744318] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0700004)
[ 298.744323] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[ 298.744330] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100002)
[ 298.744362] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[ 298.744374] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xd091d081)
[ 298.744380] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xd060d060)
[ 298.744385] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0x5050)
[ 298.744390] pcieport 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0x10100)
[ 298.744398] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
[ 298.744405] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 298.744453] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x1ff)
[ 298.744465] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xd001d001)
[ 298.744471] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xd050d050)
[ 298.744476] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x6060)
[ 298.744481] pcieport 0000:00:1c.4: restoring config space at offset 0x6 (was 0x0, writing 0x20200)
[ 298.744489] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
[ 298.744496] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 298.744544] pcieport 0000:00:1c.5: restoring config space at offset 0xf (was 0x200, writing 0x2ff)
[ 298.744556] pcieport 0000:00:1c.5: restoring config space at offset 0x9 (was 0x10001, writing 0xd0b1d0a1)
[ 298.744562] pcieport 0000:00:1c.5: restoring config space at offset 0x8 (was 0x0, writing 0xd040d040)
[ 298.744567] pcieport 0000:00:1c.5: restoring config space at offset 0x7 (was 0x20000000, writing 0x2020)
[ 298.744572] pcieport 0000:00:1c.5: restoring config space at offset 0x6 (was 0x0, writing 0x30300)
[ 298.744581] pcieport 0000:00:1c.5: restoring config space at offset 0x3 (was 0x810000, writing 0x810040)
[ 298.744587] pcieport 0000:00:1c.5: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 298.744624] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 298.744638] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x8 (was 0x1, writing 0x3081)
[ 298.744652] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 298.744663] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x205)
[ 298.744677] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0x3061)
[ 298.744690] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 298.744701] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x309)
[ 298.744715] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0x3041)
[ 298.744729] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 298.744749] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[ 298.744769] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x4 (was 0x0, writing 0xd0704800)
[ 298.744777] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 298.744838] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 298.744881] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 298.744890] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x0, writing 0xff)
[ 298.744903] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 298.744908] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xd030d030)
[ 298.744913] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[ 298.744918] pci 0000:00:1e.0: restoring config space at offset 0x6 (was 0x0, writing 0x20040400)
[ 298.744929] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 298.745015] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 298.745043] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 298.745069] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800005)
[ 298.745106] ata_piix 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[ 298.745121] pci 0000:00:1f.3: restoring config space at offset 0xf (was 0x300, writing 0x30a)
[ 298.745141] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0xd0705000)
[ 298.745149] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800003)
[ 298.745186] b43-pci-bridge 0000:02:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 298.745210] b43-pci-bridge 0000:02:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xd000000c)
[ 298.745219] b43-pci-bridge 0000:02:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0500004)
[ 298.745225] b43-pci-bridge 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[ 298.745234] b43-pci-bridge 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 298.745427] sky2 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 298.745480] sky2 0000:03:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfffe0000)
[ 298.745580] sky2 0000:03:00.0: restoring config space at offset 0x6 (was 0x1, writing 0x2001)
[ 298.745631] sky2 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xd0400004)
[ 298.745659] sky2 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x40)
[ 298.745708] sky2 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 298.746005] firewire_ohci 0000:04:03.0: restoring config space at offset 0x4 (was 0x0, writing 0xd0300000)
[ 298.746011] firewire_ohci 0000:04:03.0: restoring config space at offset 0x3 (was 0x0, writing 0xf810)
[ 298.746018] firewire_ohci 0000:04:03.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900216)
[ 298.834912] i915 0000:00:02.0: setting latency timer to 64
[ 298.976691] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 298.976697] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 298.976724] usb usb3: root hub lost power or was reset
[ 298.976757] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 298.976763] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 298.976788] usb usb4: root hub lost power or was reset
[ 298.976807] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 298.976813] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 298.976824] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 298.976830] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 298.976853] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 298.976860] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 298.976885] usb usb5: root hub lost power or was reset
[ 298.976917] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 298.976923] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 298.976946] usb usb6: root hub lost power or was reset
[ 298.976964] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 298.976970] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 298.976995] usb usb7: root hub lost power or was reset
[ 298.977027] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 298.977034] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 298.977109] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 298.977152] pci 0000:00:1e.0: power state changed by ACPI to D0
[ 298.977159] pci 0000:00:1e.0: setting latency timer to 64
[ 298.977193] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 298.977222] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 298.977252] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 298.977279] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 298.977284] ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 298.977289] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 298.977304] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 298.977309] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 298.977321] pci 0000:00:1f.3: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 298.977328] b43-pci-bridge 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 299.068146] firewire_core: skipped bus generations, destroying all nodes
[ 299.148490] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 299.148493] ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[ 299.164390] ata1.00: configured for UDMA/33
[ 299.484393] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 299.484397] ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 299.557406] ata3.00: configured for UDMA/133
[ 299.568146] firewire_core: rediscovered device fw0
[ 299.924138] sd 2:0:0:0: [sda] Starting disk
[ 300.096107] usb 5-1: reset full speed USB device using uhci_hcd and address 2
[ 300.500108] usb 7-1: reset low speed USB device using uhci_hcd and address 2
[ 300.916037] usb 7-2: reset full speed USB device using uhci_hcd and address 3
[ 301.074176] appletouch: Geyser mode initialized.
[ 301.184106] usb 3-1: reset full speed USB device using uhci_hcd and address 3
[ 301.248428] PM: Finishing wakeup.
[ 301.248429] Restarting tasks ... done.
[ 301.301416] sky2 eth0: enabling interface
[ 301.301673] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 301.580150] usb 3-1: USB disconnect, address 3
[ 302.073053] usb 3-1: new full speed USB device using uhci_hcd and address 4
[ 302.255212] usb 3-1: New USB device found, idVendor=05ac, idProduct=1000
[ 302.255221] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 302.255445] usb 3-1: configuration #1 chosen from 1 choice
[ 302.276228] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input15
[ 302.276544] generic-usb 0003:05AC:1000.0008: input,hidraw6: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1a.0-1/input0
[ 302.307157] input: HID 05ac:1000 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input16
[ 302.307444] generic-usb 0003:05AC:1000.0009: input,hidraw7: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1a.0-1/input1
[ 302.563296] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[ 302.567188] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -71
[ 302.588176] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -71
[ 302.589173] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -71
[ 302.590177] usb 3-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -71
[ 302.836224] usb 3-1: USB disconnect, address 4
[ 303.128219] usb 3-1: new full speed USB device using uhci_hcd and address 5
[ 303.324301] usb 3-1: New USB device found, idVendor=05ac, idProduct=8205
[ 303.324310] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 303.324530] usb 3-1: configuration #1 chosen from 1 choice
[ 321.894260] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 321.894270] ata3.00: BMDMA stat 0x6
[ 321.894278] ata3.00: failed command: READ DMA
[ 321.894293] ata3.00: cmd c8/00:00:40:29:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 321.894296] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 321.894304] ata3.00: status: { DRDY ERR }
[ 321.894309] ata3.00: error: { ICRC ABRT }
[ 321.894332] ata3: soft resetting link
[ 322.160582] ata3.00: configured for UDMA/133
[ 322.160610] ata3: EH complete
[ 322.229652] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 322.229661] ata3.00: BMDMA stat 0x6
[ 322.229669] ata3.00: failed command: READ DMA
[ 322.229684] ata3.00: cmd c8/00:00:50:87:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 322.229687] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 322.229695] ata3.00: status: { DRDY ERR }
[ 322.229700] ata3.00: error: { ICRC ABRT }
[ 322.229722] ata3: soft resetting link
[ 322.488645] ata3.00: configured for UDMA/133
[ 322.488672] ata3: EH complete
[ 322.569303] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 322.569312] ata3.00: BMDMA stat 0x6
[ 322.569320] ata3.00: failed command: READ DMA
[ 322.569335] ata3.00: cmd c8/00:00:c0:94:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 322.569339] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 322.569346] ata3.00: status: { DRDY ERR }
[ 322.569352] ata3.00: error: { ICRC ABRT }
[ 322.569374] ata3: soft resetting link
[ 322.828613] ata3.00: configured for UDMA/133
[ 322.828639] ata3: EH complete
[ 322.895315] ata3.00: limiting speed to UDMA/100:PIO4
[ 322.895326] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 322.895333] ata3.00: BMDMA stat 0x6
[ 322.895340] ata3.00: failed command: READ DMA
[ 322.895355] ata3.00: cmd c8/00:00:c8:a1:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 322.895359] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 322.895366] ata3.00: status: { DRDY ERR }
[ 322.895372] ata3.00: error: { ICRC ABRT }
[ 322.895394] ata3: soft resetting link
[ 323.160636] ata3.00: configured for UDMA/100
[ 323.160663] ata3: EH complete
[ 323.227391] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 323.227400] ata3.00: BMDMA stat 0x6
[ 323.227408] ata3.00: failed command: READ DMA
[ 323.227423] ata3.00: cmd c8/00:00:c8:a1:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 323.227426] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 323.227434] ata3.00: status: { DRDY ERR }
[ 323.227439] ata3.00: error: { ICRC ABRT }
[ 323.227462] ata3: soft resetting link
[ 323.476521] ata3.00: configured for UDMA/100
[ 323.476539] ata3: EH complete
[ 323.557202] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 323.557211] ata3.00: BMDMA stat 0x6
[ 323.557219] ata3.00: failed command: READ DMA
[ 323.557234] ata3.00: cmd c8/00:00:50:bc:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 323.557237] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 323.557245] ata3.00: status: { DRDY ERR }
[ 323.557250] ata3.00: error: { ICRC ABRT }
[ 323.557273] ata3: soft resetting link
[ 323.816618] ata3.00: configured for UDMA/100
[ 323.816644] ata3: EH complete
[ 323.897285] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 323.897294] ata3.00: BMDMA stat 0x6
[ 323.897302] ata3.00: failed command: READ DMA
[ 323.897317] ata3.00: cmd c8/00:00:e8:e1:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 323.897320] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 323.897328] ata3.00: status: { DRDY ERR }
[ 323.897333] ata3.00: error: { ICRC ABRT }
[ 323.897356] ata3: soft resetting link
[ 324.148635] ata3.00: configured for UDMA/100
[ 324.148661] ata3: EH complete
[ 324.215311] ata3.00: limiting speed to UDMA/33:PIO4
[ 324.215322] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 324.215330] ata3.00: BMDMA stat 0x6
[ 324.215337] ata3.00: failed command: READ DMA
[ 324.215353] ata3.00: cmd c8/00:00:b8:ef:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 324.215356] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 324.215364] ata3.00: status: { DRDY ERR }
[ 324.215369] ata3.00: error: { ICRC ABRT }
[ 324.215392] ata3: soft resetting link
[ 324.480582] ata3.00: configured for UDMA/33
[ 324.480608] ata3: EH complete
[ 324.561249] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 324.561258] ata3.00: BMDMA stat 0x6
[ 324.561265] ata3.00: failed command: READ DMA
[ 324.561280] ata3.00: cmd c8/00:00:b8:ef:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 324.561283] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 324.561291] ata3.00: status: { DRDY ERR }
[ 324.561296] ata3.00: error: { ICRC ABRT }
[ 324.561325] ata3: soft resetting link
[ 324.828635] ata3.00: configured for UDMA/33
[ 324.828661] ata3: EH complete
[ 324.895389] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 324.895398] ata3.00: BMDMA stat 0x6
[ 324.895406] ata3.00: failed command: READ DMA
[ 324.895421] ata3.00: cmd c8/00:00:30:fe:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 324.895424] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 324.895432] ata3.00: status: { DRDY ERR }
[ 324.895437] ata3.00: error: { ICRC ABRT }
[ 324.895459] ata3: soft resetting link
[ 325.160618] ata3.00: configured for UDMA/33
[ 325.160644] ata3: EH complete
[ 325.227376] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 325.227386] ata3.00: BMDMA stat 0x6
[ 325.227394] ata3.00: failed command: READ DMA
[ 325.227409] ata3.00: cmd c8/00:00:30:fe:99/00:00:00:00:00/ec tag 0 dma 131072 in
[ 325.227412] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 325.227420] ata3.00: status: { DRDY ERR }
[ 325.227425] ata3.00: error: { ICRC ABRT }
[ 325.227447] ata3: soft resetting link
[ 325.476521] ata3.00: configured for UDMA/33
[ 325.476540] ata3: EH complete
[ 325.557197] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 325.557207] ata3.00: BMDMA stat 0x6
[ 325.557214] ata3.00: failed command: READ DMA
[ 325.557229] ata3.00: cmd c8/00:00:e0:11:9a/00:00:00:00:00/ec tag 0 dma 131072 in
[ 325.557233] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 325.557240] ata3.00: status: { DRDY ERR }
[ 325.557246] ata3.00: error: { ICRC ABRT }
[ 325.557268] ata3: soft resetting link
[ 325.808632] ata3.00: configured for UDMA/33
[ 325.808658] ata3: EH complete
[ 325.893437] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 325.893446] ata3.00: BMDMA stat 0x6
[ 325.893454] ata3.00: failed command: READ DMA
[ 325.893469] ata3.00: cmd c8/00:00:00:db:9a/00:00:00:00:00/ec tag 0 dma 131072 in
[ 325.893472] res 51/84:01:00:00:00/00:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 325.893480] ata3.00: status: { DRDY ERR }
[ 325.893485] ata3.00: error: { ICRC ABRT }
[ 325.893507] ata3: soft resetting link
[ 326.160637] ata3.00: configured for UDMA/33
[ 326.160663] ata3: EH complete
[ 326.241315] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 326.241325] ata3.00: BMDMA stat 0x6
[ 326.241333] ata3.00: failed command: READ DMA EXT
[ 326.241348] ata3.00: cmd 25/00:00:b8:f3:7a/00:02:0d:00:00/e0 tag 0 dma 262144 in
[ 326.241351] res 51/84:01:00:00:00/84:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 326.241359] ata3.00: status: { DRDY ERR }
[ 326.241364] ata3.00: error: { ICRC ABRT }
[ 326.241387] ata3: soft resetting link
[ 326.500618] ata3.00: configured for UDMA/33
[ 326.500644] ata3: EH complete
[ 326.612922] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 326.612931] ata3.00: BMDMA stat 0x6
[ 326.612939] ata3.00: failed command: READ DMA
[ 326.612954] ata3.00: cmd c8/00:00:38:11:52/00:00:00:00:00/ec tag 0 dma 131072 in
[ 326.612957] res 51/84:01:00:00:00/84:00:00:00:00/e0 Emask 0x30 (host bus error)
[ 326.612965] ata3.00: status: { DRDY ERR }
[ 326.612970] ata3.00: error: { ICRC ABRT }
[ 326.612993] ata3: soft resetting link
[ 326.880635] ata3.00: configured for UDMA/33
[ 326.880662] ata3: EH complete
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0a <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at d0100000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 3110 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4199
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: [d0] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 30c0 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI])
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 4: I/O ports at 30a0 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI])
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 0: Memory at d0704c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0700000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d0600000-d06fffff
Prefetchable memory behind bridge: 00000000d0800000-00000000d09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4159
Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d0500000-d05fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #4, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4161
Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=05 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0400000-d04fffff
Prefetchable memory behind bridge: 00000000d0a00000-00000000d0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #5, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0300c Data: 4169
Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=06 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI])
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI])
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 20
Region 0: Memory at d0704800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d0300000-d03fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 30e0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 0: I/O ports at 30f8 [size=8]
Region 1: I/O ports at 311c [size=4]
Region 2: I/O ports at 30f0 [size=8]
Region 3: I/O ports at 3118 [size=4]
Region 4: I/O ports at 3020 [size=16]
Region 5: I/O ports at 4000 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
Subsystem: Apple Computer Inc. Device 00a1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 20
Region 0: Memory at d0705000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
02:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03)
Subsystem: Apple Computer Inc. Device 0088
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0500000 (64-bit, non-prefetchable) [size=16K]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency L0 <4us, L1 <64us
ClockPM- Surprise+ LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 14-a2-52-ff-ff-7e-00-1e
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: b43-pci-bridge
03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8058 PCI-E Gigabit Ethernet Controller (rev 13)
Subsystem: Marvell Technology Group Ltd. Device 00ba
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at d0400000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 2000 [size=256]
Expansion ROM at d0a00000 [disabled] [size=128K]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Marvell Yukon 88E8058 Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: Yukon 88E8058
[EC] Engineering changes: Rev. 1.3
[MN] Manufacture ID: 4d 61 72 76 65 6c 6c
[SN] Serial number: AbCdEfGB3A4B8
[CP] Extended capability: 01 10 cc 03
[RV] Reserved: checksum good, 9 byte(s) reserved
Read/write fields:
[RW] Read-write area: 121 byte(s) free
End
Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4179
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 2048 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: sky2
04:03.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 61) (prog-if 10 [OHCI])
Subsystem: Agere Systems FW322/323
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 248 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: firewire_ohci
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: OCZ Vertex SSD
Device Model: OCZ-VERTEX2
Serial Number: OCZ-82C6605B90I08V73
Firmware Version: 1.33
User Capacity: 120.034.123.776 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Tue Sep 13 08:45:40 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 5) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f --- --- --- Pre-fail Always - 491634385768
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours 0x0032 --- --- --- Old_age Always - 3634404899488359524
12 Power_Cycle_Count 0x0032 --- --- --- Old_age Always - 108159843
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 321
177 Wear_Leveling_Count 0x0000 000 000 --- Old_age Offline - 0
177 Wear_Leveling_Count <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
181 Program_Fail_Cnt_Total <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
181 Program_Fail_Cnt_Total 0x0032 000 000 --- Old_age Always - 0
181 Program_Fail_Cnt_Total <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
182 Erase_Fail_Count_Total <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
182 Erase_Fail_Count_Total 0x0032 000 000 --- Old_age Always - 0
182 Erase_Fail_Count_Total <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
187 Reported_Uncorrect <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
187 Reported_Uncorrect <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
194 Temperature_Celsius <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
194 Temperature_Celsius 0x0022 030 030 --- Old_age Always - 30 (Lifetime Min/Max 30/30)
194 Temperature_Celsius <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
195 Program_Failure_Blk_Ct <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
195 Program_Failure_Blk_Ct 0x001c --- --- --- Old_age Offline - 491634385768
196 Erase_Failure_Blk_Ct 0x0033 --- --- --- Pre-fail Always - 25700
231 Temperature_Celsius 0x0013 100 100 --- Pre-fail Always - 0
231 Temperature_Celsius <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
233 Media_Wearout_Indicator <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
233 Media_Wearout_Indicator 0x0000 000 000 --- Old_age Offline - 1344
233 Media_Wearout_Indicator <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
234 Unknown_Attribute <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
234 Unknown_Attribute 0x0032 000 000 --- Old_age Always - 1792
234 Unknown_Attribute <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
241 Total_LBAs_Written <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
241 Total_LBAs_Written 0x0032 000 000 --- Old_age Always - 1792
241 Total_LBAs_Written <== Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO
242 Total_LBAs_Read <== Threshold Page | INCONSISTENT IDENTITIES IN THE DATA
242 Total_LBAs_Read 0x0032 000 000 --- Old_age Always - 2624
Error SMART Error Log Read failed: Eingabe-/Ausgabefehler
Smartctl: SMART Error Log Read Failed
Error SMART Error Self-Test Log Read failed: Eingabe-/Ausgabefehler
Smartctl: SMART Self Test Log Read Failed
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: