Bug#639208: linux-image-3.0.0-1-amd64: Segfault everytime
On Thu, 2011-08-25 at 01:56 +0100, Ben Hutchings wrote:
> On Thu, 2011-08-25 at 02:03 +0200, Matthew Smith wrote:
> > Package: linux-2.6
> > Version: 3.0.0-2
> > Severity: important
> >
> > First reported this bug several months ago. Apart from the advice to use a
> > different video driver (radeon instead of fglrx which doesn't help at all) I
> > have heard nothing. Nothing after the 2.6.32 kernel works here.
> >
> > I can't trust reporting this bug running that kernel hence my report from the
> > only kernel that works here.
> >
> > I can't unpack a compressed dvd (rar set from internet which unpacks fine under
> > 2.6.32) is just one symptom.
> >
> > Refer to my original bugreport #615397 but ignore the non-working youtube as
> > the newest 64bit flash plugin seems to work okay now.... All the rest applies.
> > I am stuck now on a kernel which is no longer in unstable and packages needing
> > to be held in dselect are mounting.; Thanks
> [...]
>
> Sorry we haven't been able to help you yet. Looking over the previous
> report, it sounds like data is being corrupted between the hard drive
> and memory. Normally I would think this was a hardware fault, but you
> say that the system continues to work with the kernel from 'squeeze'.
> So I suspect the hard drive interface is being set up wrongly in the
> newer kernel version.
>
> Can you send boot logs from the working kernel and the current kernel?
>
> Ben.
>
I hope I posted the right files. I enabled bootlogd
in /etc/default/bootlog but the file /var/log/boot doesn't contain much
at all so I enclose the dmesg files of the 3.0 kernel (the one that
doesn't work) and the 2.6.32 kernel (the one that does work fine). If
these are the wrong files please point me in the right direction.
Thanks
Matthew
PS As far as I can see, the bug only appears after trying to unpack a
4GB rar set or use hellanzb for a length of time.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=17ae8e4c-882c-4f4a-9b89-7815b7c9185d ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff30000 (usable)
[ 0.000000] BIOS-e820: 00000000bff30000 - 00000000bff40000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff40000 - 00000000bfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbff30 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bff30000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bff30000 page 4k
[ 0.000000] kernel direct mapping tables up to bff30000 @ 10000-15000
[ 0.000000] RAMDISK: 36e44000 - 37719af7
[ 0.000000] ACPI: RSDP 00000000000fa850 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bff30000 00030 (v01 A M I OEMRSDT 06000517 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bff30200 00081 (v01 A M I OEMFACP 06000517 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bff303f0 038EA (v01 SK8V_ SK8V_033 00000033 MSFT 0100000D)
[ 0.000000] ACPI: FACS 00000000bff40000 00040
[ 0.000000] ACPI: APIC 00000000bff30390 00052 (v01 A M I OEMAPIC 06000517 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bff40040 0003F (v01 A M I OEMBIOS 06000517 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bff30000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000bff30000
[ 0.000000] NODE_DATA [0000000000013000 - 000000000001afff]
[ 0.000000] bootmap [000000000001b000 - 0000000000032fe7] pages 18
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bff30000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a414] TEXT DATA BSS ==> [0001000000 - 000168a414]
[ 0.000000] #3 [0036e44000 - 0037719af7] RAMDISK ==> [0036e44000 - 0037719af7]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b294] BRK ==> [000168b000 - 000168b294]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001c00000-ffff8800045fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bff30
[ 0.000000] On node 0 totalpages: 786111
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10694 pages used for memmap
[ 0.000000] DMA32 zone: 771434 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ff80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u1048576
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775259
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=17ae8e4c-882c-4f4a-9b89-7815b7c9185d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f8000000 old size 32 MB
[ 0.000000] Aperture from AGP @ f8000000 size 64 MB (APSIZE f30)
[ 0.000000] Node 0: aperture @ f8000000 size 64 MB
[ 0.000000] Memory: 3085124k/3144896k available (3079k kernel code, 452k absent, 59320k reserved, 1892k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2202.676 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4405.35 BogoMIPS (lpj=8810704)
[ 0.004028] Security Framework initialized
[ 0.004036] SELinux: Disabled at boot.
[ 0.004417] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007246] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009228] Mount-cache hash table entries: 256
[ 0.009399] Initializing cgroup subsys ns
[ 0.009402] Initializing cgroup subsys cpuacct
[ 0.009406] Initializing cgroup subsys devices
[ 0.009408] Initializing cgroup subsys freezer
[ 0.009411] Initializing cgroup subsys net_cls
[ 0.009440] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.009442] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.009444] CPU 0/0x0 -> Node 0
[ 0.009446] tseg: 0000000000
[ 0.009461] mce: CPU supports 5 MCE banks
[ 0.009473] Performance Events: AMD PMU driver.
[ 0.009477] ... version: 0
[ 0.009479] ... bit width: 48
[ 0.009481] ... generic registers: 4
[ 0.009482] ... value mask: 0000ffffffffffff
[ 0.009484] ... max period: 00007fffffffffff
[ 0.009486] ... fixed-purpose events: 0
[ 0.009487] ... event mask: 000000000000000f
[ 0.009500] SMP alternatives: switching to UP code
[ 0.014626] ACPI: Core revision 20090903
[ 0.018138] Setting APIC routing to flat
[ 0.018946] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.058634] CPU0: AMD Athlon(tm) 64 FX-51 Processor stepping 08
[ 0.060001] Brought up 1 CPUs
[ 0.060001] Total of 1 processors activated (4405.35 BogoMIPS).
[ 0.060001] CPU0 attaching NULL sched-domain.
[ 0.060001] devtmpfs: initialized
[ 0.060001] regulator: core version 0.5
[ 0.060001] NET: Registered protocol family 16
[ 0.060001] node 0 link 0: io port [1000, ffffff]
[ 0.060001] TOM: 00000000c0000000 aka 3072M
[ 0.060001] node 0 link 0: mmio [a0000, bffff]
[ 0.060001] node 0 link 0: mmio [c0000000, ffffffff]
[ 0.060001] bus: [00,ff] on node 0 link 0
[ 0.060001] bus: 00 index 0 io port: [0, ffff]
[ 0.060003] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.060005] bus: 00 index 2 mmio: [c0000000, fcffffffff]
[ 0.060011] ACPI: bus type pci registered
[ 0.060065] PCI: Using configuration type 1 for base access
[ 0.060492] bio: create slab <bio-0> at 0
[ 0.060838] ACPI: EC: Look up EC in DSDT
[ 0.062025] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.065351] ACPI: Interpreter enabled
[ 0.065354] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.065373] ACPI: Using IOAPIC for interrupt routing
[ 0.069616] ACPI: No dock devices found.
[ 0.069716] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.069767] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.069852] pci 0000:00:01.0: supports D1
[ 0.069885] pci 0000:00:09.0: reg 10 io port: [0xdc00-0xdc3f]
[ 0.069918] pci 0000:00:09.0: supports D1 D2
[ 0.069944] pci 0000:00:09.1: reg 10 io port: [0xec00-0xec07]
[ 0.069977] pci 0000:00:09.1: supports D1 D2
[ 0.070005] pci 0000:00:09.2: reg 10 32bit mmio: [0xfdc00000-0xfdc007ff]
[ 0.070012] pci 0000:00:09.2: reg 14 32bit mmio: [0xfdb00000-0xfdb03fff]
[ 0.070043] pci 0000:00:09.2: supports D1 D2
[ 0.070046] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.070050] pci 0000:00:09.2: PME# disabled
[ 0.070087] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfdd00000-0xfdd03fff]
[ 0.070093] pci 0000:00:0a.0: reg 14 io port: [0xb000-0xb0ff]
[ 0.070127] pci 0000:00:0a.0: supports D1 D2
[ 0.070129] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070133] pci 0000:00:0a.0: PME# disabled
[ 0.070155] pci 0000:00:0d.0: reg 10 32bit mmio: [0xfde00000-0xfde01fff]
[ 0.070204] pci 0000:00:0f.0: reg 10 io port: [0xe400-0xe407]
[ 0.070210] pci 0000:00:0f.0: reg 14 io port: [0xe000-0xe003]
[ 0.070216] pci 0000:00:0f.0: reg 18 io port: [0xd800-0xd807]
[ 0.070222] pci 0000:00:0f.0: reg 1c io port: [0xd400-0xd403]
[ 0.070228] pci 0000:00:0f.0: reg 20 io port: [0xd000-0xd00f]
[ 0.070233] pci 0000:00:0f.0: reg 24 io port: [0xc800-0xc8ff]
[ 0.070292] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.070359] pci 0000:00:10.0: reg 20 io port: [0xb400-0xb41f]
[ 0.070380] pci 0000:00:10.0: supports D1 D2
[ 0.070382] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070386] pci 0000:00:10.0: PME# disabled
[ 0.070425] pci 0000:00:10.1: reg 20 io port: [0xb800-0xb81f]
[ 0.070445] pci 0000:00:10.1: supports D1 D2
[ 0.070447] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070451] pci 0000:00:10.1: PME# disabled
[ 0.070490] pci 0000:00:10.2: reg 20 io port: [0xc000-0xc01f]
[ 0.070511] pci 0000:00:10.2: supports D1 D2
[ 0.070513] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070517] pci 0000:00:10.2: PME# disabled
[ 0.070556] pci 0000:00:10.3: reg 20 io port: [0xc400-0xc41f]
[ 0.070577] pci 0000:00:10.3: supports D1 D2
[ 0.070579] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070582] pci 0000:00:10.3: PME# disabled
[ 0.070610] pci 0000:00:10.4: reg 10 32bit mmio: [0xfdf00000-0xfdf000ff]
[ 0.070643] pci 0000:00:10.4: supports D1 D2
[ 0.070645] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070648] pci 0000:00:10.4: PME# disabled
[ 0.070700] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.070705] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[ 0.070750] pci 0000:00:11.5: reg 10 io port: [0x1000-0x10ff]
[ 0.070785] pci 0000:00:11.5: supports D1 D2
[ 0.070814] pci 0000:00:11.6: reg 10 io port: [0x00-0xff]
[ 0.070946] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.070952] pci 0000:01:00.0: reg 14 io port: [0xa000-0xa0ff]
[ 0.070957] pci 0000:01:00.0: reg 18 32bit mmio: [0xfd400000-0xfd40ffff]
[ 0.070970] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfd300000-0xfd31ffff]
[ 0.070986] pci 0000:01:00.0: supports D1 D2
[ 0.071013] pci 0000:01:00.1: reg 10 32bit mmio: [0xfd200000-0xfd203fff]
[ 0.071042] pci 0000:01:00.1: supports D1 D2
[ 0.071070] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
[ 0.071074] pci 0000:00:01.0: bridge 32bit mmio: [0xfcf00000-0xfd4fffff]
[ 0.071078] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd4e00000-0xf4dfffff]
[ 0.071087] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.076748] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 0.076825] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 0.076902] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 0.076978] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.077058] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.077135] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.077212] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.077288] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.077377] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.077380] vgaarb: loaded
[ 0.077440] PCI: Using ACPI for IRQ routing
[ 0.077447] pci 0000:00:00.0: BAR 0: address space collision on of device [0xf8000000-0xfbffffff]
[ 0.077502] pci 0000:00:00.0: BAR 0: can't allocate resource
[ 0.078712] pnp: PnP ACPI init
[ 0.078720] ACPI: bus type pnp registered
[ 0.079820] pnp 00:07: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079824] pnp 00:07: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079827] pnp 00:07: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079830] pnp 00:07: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079833] pnp 00:07: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079837] pnp 00:07: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079840] pnp 00:07: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079843] pnp 00:07: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079846] pnp 00:07: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079849] pnp 00:07: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079853] pnp 00:07: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079856] pnp 00:07: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.079859] pnp 00:07: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.080337] pnp 00:09: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.080341] pnp 00:09: mem resource (0xc0000-0xdffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.080344] pnp 00:09: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.080348] pnp 00:09: mem resource (0x100000-0xbffeffff) overlaps 0000:00:00.0 BAR 0 (0x0-0x3ffffff), disabling
[ 0.080610] pnp: PnP ACPI: found 10 devices
[ 0.080612] ACPI: ACPI bus type pnp unregistered
[ 0.080624] system 00:07: ioport range 0x295-0x296 has been reserved
[ 0.080627] system 00:07: ioport range 0x3e1-0x3e7 has been reserved
[ 0.080630] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.080632] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.080635] system 00:07: ioport range 0x400-0x41f has been reserved
[ 0.080641] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.080644] system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.080647] system 00:08: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.085323] Switching to clocksource acpi_pm
[ 0.085392] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.085396] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.085400] pci 0000:00:01.0: MEM window: 0xfcf00000-0xfd4fffff
[ 0.085403] pci 0000:00:01.0: PREFETCH window: 0xd4e00000-0xf4dfffff
[ 0.085416] pci 0000:00:01.0: setting latency timer to 64
[ 0.085421] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.085423] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.085426] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.085428] pci_bus 0000:01: resource 1 mem: [0xfcf00000-0xfd4fffff]
[ 0.085431] pci_bus 0000:01: resource 2 pref mem [0xd4e00000-0xf4dfffff]
[ 0.085463] NET: Registered protocol family 2
[ 0.085630] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.087377] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.092047] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.092775] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.092778] TCP reno registered
[ 0.092882] NET: Registered protocol family 1
[ 0.092898] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.120033] pci 0000:01:00.0: Boot video device
[ 0.120084] Unpacking initramfs...
[ 0.346830] Freeing initrd memory: 9046k freed
[ 0.352862] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188]
[ 0.356130] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 0.356443] audit: initializing netlink socket (disabled)
[ 0.356455] type=2000 audit(1314308842.356:1): initialized
[ 0.359658] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.361006] VFS: Disk quotas dquot_6.5.2
[ 0.361056] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.361132] msgmni has been set to 6043
[ 0.361290] alg: No test for stdrng (krng)
[ 0.361338] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.361341] io scheduler noop registered
[ 0.361343] io scheduler anticipatory registered
[ 0.361344] io scheduler deadline registered
[ 0.361374] io scheduler cfq registered (default)
[ 0.362776] Linux agpgart interface v0.103
[ 0.362816] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.363116] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.363160] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.363162] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.363329] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.363419] mice: PS/2 mouse device common for all mice
[ 0.363463] rtc_cmos 00:02: RTC can wake from S4
[ 0.363500] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.363549] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.363563] cpuidle: using governor ladder
[ 0.363565] cpuidle: using governor menu
[ 0.363569] No iBFT detected.
[ 0.363869] TCP cubic registered
[ 0.363977] NET: Registered protocol family 10
[ 0.364449] lo: Disabled Privacy Extensions
[ 0.364705] Mobile IPv6
[ 0.364707] NET: Registered protocol family 17
[ 0.364786] PM: Resume from disk failed.
[ 0.364795] registered taskstats version 1
[ 0.365126] rtc_cmos 00:02: setting system clock to 2011-08-25 21:47:23 UTC (1314308843)
[ 0.365149] Initalizing network drop monitor service
[ 0.365174] Freeing unused kernel memory: 592k freed
[ 0.365483] Write protecting the kernel read-only data: 4236k
[ 0.381003] udev[48]: starting version 166
[ 0.388635] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.549537] usbcore: registered new interface driver usbfs
[ 0.549678] usbcore: registered new interface driver hub
[ 0.549809] usbcore: registered new device driver usb
[ 0.552030] SCSI subsystem initialized
[ 0.577006] libata version 3.00 loaded.
[ 0.577029] alloc irq_desc for 17 on node 0
[ 0.577031] alloc kstat_irqs on node 0
[ 0.577040] skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.577051] skge 0000:00:0a.0: PCI: Disallowing DAC for device
[ 0.577082] skge 1.13 addr 0xfdd00000 irq 17 chip Yukon rev 1
[ 0.577818] skge eth0: addr 00:0e:a6:20:4a:5e
[ 0.592742] Floppy drive(s): fd0 is 1.44M
[ 0.593799] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.593941] pata_via 0000:00:0f.1: version 0.3.4
[ 0.593959] alloc irq_desc for 20 on node 0
[ 0.593961] alloc kstat_irqs on node 0
[ 0.593968] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.594346] scsi0 : pata_via
[ 0.597685] scsi1 : pata_via
[ 0.599188] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.599191] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.599511] sata_via 0000:00:0f.0: version 2.4
[ 0.599525] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.599557] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 0.599731] scsi2 : sata_via
[ 0.599827] scsi3 : sata_via
[ 0.599895] ata3: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd000 irq 20
[ 0.599897] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xd008 irq 20
[ 0.600123] alloc irq_desc for 21 on node 0
[ 0.600125] alloc kstat_irqs on node 0
[ 0.600132] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.600151] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.600179] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 0.600237] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000
[ 0.611870] FDC 0 is a post-1991 82077
[ 0.612012] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.612044] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.612046] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.612049] usb usb1: Product: EHCI Host Controller
[ 0.612051] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.612053] usb usb1: SerialNumber: 0000:00:10.4
[ 0.612158] usb usb1: configuration #1 chosen from 1 choice
[ 0.612213] hub 1-0:1.0: USB hub found
[ 0.612222] hub 1-0:1.0: 8 ports detected
[ 0.612818] firewire_ohci 0000:00:09.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.638296] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.684269] firewire_ohci: Added fw-ohci device 0000:00:09.2, OHCI version 1.10
[ 0.684528] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.684538] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.684551] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.684575] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
[ 0.684623] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.684625] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.684628] usb usb2: Product: UHCI Host Controller
[ 0.684630] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.684632] usb usb2: SerialNumber: 0000:00:10.0
[ 0.685644] usb usb2: configuration #1 chosen from 1 choice
[ 0.685728] hub 2-0:1.0: USB hub found
[ 0.685736] hub 2-0:1.0: 2 ports detected
[ 0.686295] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.686304] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.686315] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.686340] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
[ 0.686382] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.686385] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.686387] usb usb3: Product: UHCI Host Controller
[ 0.686389] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.686391] usb usb3: SerialNumber: 0000:00:10.1
[ 0.686500] usb usb3: configuration #1 chosen from 1 choice
[ 0.686551] hub 3-0:1.0: USB hub found
[ 0.686558] hub 3-0:1.0: 2 ports detected
[ 0.687910] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.687920] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.687935] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.687958] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
[ 0.688034] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.688036] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.688039] usb usb4: Product: UHCI Host Controller
[ 0.688041] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.688043] usb usb4: SerialNumber: 0000:00:10.2
[ 0.688155] usb usb4: configuration #1 chosen from 1 choice
[ 0.688221] hub 4-0:1.0: USB hub found
[ 0.688228] hub 4-0:1.0: 2 ports detected
[ 0.688308] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.688314] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.688323] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 0.688345] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
[ 0.688377] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.688380] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.688382] usb usb5: Product: UHCI Host Controller
[ 0.688384] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 0.688386] usb usb5: SerialNumber: 0000:00:10.3
[ 0.688467] usb usb5: configuration #1 chosen from 1 choice
[ 0.688515] hub 5-0:1.0: USB hub found
[ 0.688522] hub 5-0:1.0: 2 ports detected
[ 0.768421] ata1.01: ATAPI: _NEC DVD_RW ND-3540A, 1.04, max UDMA/33
[ 0.784316] ata1.01: configured for UDMA/33
[ 0.786161] scsi 0:0:1:0: CD-ROM _NEC DVD_RW ND-3540A 1.04 PQ: 0 ANSI: 5
[ 0.804014] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.924012] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.968430] ata3.00: ATA-8: ST3500418AS, CC46, max UDMA/133
[ 0.968433] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.984441] ata3.00: configured for UDMA/133
[ 0.984502] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC46 PQ: 0 ANSI: 5
[ 1.184061] firewire_core: created device fw0: GUID 00023c0141011d63, S400
[ 1.184065] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[ 1.188012] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.205111] usb 1-1: New USB device found, idVendor=1307, idProduct=0330
[ 1.205114] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.205116] usb 1-1: Product: Mass Storage Device
[ 1.205118] usb 1-1: Manufacturer: Generic
[ 1.205120] usb 1-1: SerialNumber: 00000000000006
[ 1.205179] usb 1-1: configuration #1 chosen from 1 choice
[ 1.212911] Initializing USB Mass Storage driver...
[ 1.213017] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.213129] usbcore: registered new interface driver usb-storage
[ 1.213132] USB Mass Storage support registered.
[ 1.213247] usb-storage: device found at 2
[ 1.213248] usb-storage: waiting for device to settle before scanning
[ 1.353183] ata4.00: ATA-7: Maxtor 6L160M0, BANC1G10, max UDMA/133
[ 1.353186] ata4.00: 320173056 sectors, multi 16: LBA48 NCQ (not used)
[ 1.369199] ata4.00: configured for UDMA/133
[ 1.369302] scsi 3:0:0:0: Direct-Access ATA Maxtor 6L160M0 BANC PQ: 0 ANSI: 5
[ 1.378737] usb 1-4: new high speed USB device using ehci_hcd and address 4
[ 1.405464] alloc irq_desc for 18 on node 0
[ 1.405468] alloc kstat_irqs on node 0
[ 1.405476] b43-pci-bridge 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.408931] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0d.0
[ 1.410446] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.410450] Uniform CD-ROM driver Revision: 3.20
[ 1.410554] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.411193] sd 3:0:0:0: [sdb] 320173056 512-byte logical blocks: (163 GB/152 GiB)
[ 1.411224] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.412028] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.412031] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.412253] sd 2:0:0:0: [sda] Write Protect is off
[ 1.412255] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.412275] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.412366] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.412542] sda:
[ 1.412636] sdb: sda1 sda2 <
[ 1.420395] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 1.420455] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.420511] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.433504] sdb1 sdb2 sdb3
[ 1.443228] sda5 >
[ 1.443752] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.454383] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.509238] usb 1-4: New USB device found, idVendor=1058, idProduct=1021
[ 1.509242] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.509245] usb 1-4: Product: Ext HDD 1021
[ 1.509247] usb 1-4: Manufacturer: Western Digital
[ 1.509249] usb 1-4: SerialNumber: 574341563538353939323438
[ 1.509342] usb 1-4: configuration #1 chosen from 1 choice
[ 1.510597] scsi5 : SCSI emulation for USB Mass Storage devices
[ 1.512483] usb-storage: device found at 4
[ 1.512486] usb-storage: waiting for device to settle before scanning
[ 1.748017] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 1.837659] PM: Starting manual resume from disk
[ 1.837664] PM: Resume from partition 8:5
[ 1.837665] PM: Checking hibernation image.
[ 1.837965] PM: Error -22 checking image file
[ 1.837967] PM: Resume from disk failed.
[ 1.877718] kjournald starting. Commit interval 5 seconds
[ 1.877729] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.927412] usb 2-2: New USB device found, idVendor=046d, idProduct=c03d
[ 1.927417] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.927420] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 1.927422] usb 2-2: Manufacturer: Logitech
[ 1.927517] usb 2-2: configuration #1 chosen from 1 choice
[ 3.374437] <30>udevd[352]: starting version 172
[ 3.847534] cfg80211: Using static regulatory domain info
[ 3.847538] cfg80211: Regulatory domain: US
[ 3.847540] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.847543] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 3.847546] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.847548] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.847551] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.847553] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 3.847556] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 3.847564] cfg80211: Calling CRDA for country: US
[ 3.986885] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 4.002996] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 4.003009] ACPI: Power Button [PWRB]
[ 4.003076] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 4.003081] ACPI: Sleep Button [SLPB]
[ 4.003143] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.003146] ACPI: Power Button [PWRF]
[ 4.004963] ACPI: processor limited to max C-state 1
[ 4.005194] processor LNXCPU:00: registered as cooling_device0
[ 4.335378] phy0: Selected rate control algorithm 'minstrel'
[ 4.335986] Registered led device: b43-phy0::tx
[ 4.336029] Registered led device: b43-phy0::rx
[ 4.336045] Registered led device: b43-phy0::radio
[ 4.336111] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[ 4.387973] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.662075] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.696779] EDAC MC: Ver: 2.1.0 Jan 12 2011
[ 4.698751] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.702410] gameport: EMU10K1 is pci0000:00:09.1/gameport0, io 0xec00, speed 1153kHz
[ 4.741725] EDAC amd64_edac: Ver: 3.2.0 Jan 12 2011
[ 4.741799] EDAC amd64: ECC is enabled by BIOS.
[ 4.741832] EDAC MC: Rev E or earlier detected
[ 4.741901] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2
[ 4.741924] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 4.792535] usbcore: registered new interface driver hiddev
[ 4.805205] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input6
[ 4.805290] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2/input0
[ 4.805324] usbcore: registered new interface driver usbhid
[ 4.805327] usbhid: v2.6:USB HID core driver
[ 5.041099] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 5.041104] Disabling lock debugging due to kernel taint
[ 5.153480] [fglrx] Maximum main memory to use for locked dma buffers: 2876 MBytes.
[ 5.153599] [fglrx] vendor: 1002 device: 9596 count: 1
[ 5.153972] [fglrx] ioport: bar 1, base 0xa000, size: 0x100
[ 5.153988] alloc irq_desc for 16 on node 0
[ 5.153990] alloc kstat_irqs on node 0
[ 5.153999] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.154032] pci 0000:01:00.0: PCI: Disallowing DAC for device
[ 5.154190] [fglrx] Kernel PAT support is enabled
[ 5.154220] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
[ 5.296818] EMU10K1_Audigy 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.299381] Installing spdif_bug patch: SB Audigy 2 ZS [SB0360]
[ 5.352595] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.352630] HDA Intel 0000:01:00.1: PCI: Disallowing DAC for device
[ 6.212629] usb-storage: device scan complete
[ 6.213089] scsi 4:0:0:0: Direct-Access Generic Compact Flash 0.00 PQ: 0 ANSI: 2
[ 6.213576] scsi 4:0:0:1: Direct-Access Generic SD/MMC 0.00 PQ: 0 ANSI: 2
[ 6.214075] scsi 4:0:0:2: Direct-Access Generic MS/MS-PRO 0.00 PQ: 0 ANSI: 2
[ 6.214575] scsi 4:0:0:3: Direct-Access Generic SM/xD-Picture 0.00 PQ: 0 ANSI: 2
[ 6.215691] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 6.216237] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 6.216759] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 6.217303] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 6.221081] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[ 6.222946] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[ 6.224947] sd 4:0:0:2: [sde] Attached SCSI removable disk
[ 6.225568] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[ 6.512090] usb-storage: device scan complete
[ 6.512824] scsi 5:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
[ 6.513944] sd 5:0:0:0: Attached scsi generic sg7 type 0
[ 6.514442] sd 5:0:0:0: [sdg] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.515310] sd 5:0:0:0: [sdg] Test WP failed, assume Write Enabled
[ 6.515313] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[ 6.517815] sd 5:0:0:0: [sdg] Test WP failed, assume Write Enabled
[ 6.517818] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[ 6.517871] sdg: sdg1
[ 6.533069] sd 5:0:0:0: [sdg] Test WP failed, assume Write Enabled
[ 6.533073] sd 5:0:0:0: [sdg] Assuming drive cache: write through
[ 6.533126] sd 5:0:0:0: [sdg] Attached SCSI disk
[ 7.062375] Adding 6041592k swap on /dev/sda5. Priority:-1 extents:1 across:6041592k
[ 7.256952] EXT3 FS on sda1, internal journal
[ 7.384539] loop: module loaded
[ 8.133542] IPv6 over IPv4 tunneling driver
[ 8.134245] sit0: Disabled Privacy Extensions
[ 8.134926] xs6all: Disabled Privacy Extensions
[ 8.653495] RPC: Registered udp transport module.
[ 8.653498] RPC: Registered tcp transport module.
[ 8.653500] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.754357] Slow work thread pool: Starting up
[ 8.754410] Slow work thread pool: Ready
[ 8.754475] FS-Cache: Loaded
[ 8.831947] FS-Cache: Netfs 'nfs' registered for caching
[ 8.913608] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.968423] skge eth0: enabling interface
[ 8.972388] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.228565] fuse init (API version 7.13)
[ 10.655253] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[ 10.656100] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-1-amd64 (Debian 3.0.0-2) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-5) ) #1 SMP Wed Aug 17 04:08:52 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=17ae8e4c-882c-4f4a-9b89-7815b7c9185d ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bff30000 (usable)
[ 0.000000] BIOS-e820: 00000000bff30000 - 00000000bff40000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bff40000 - 00000000bfff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./SK8V, BIOS 1003.008 06/17/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f8000000 old size 32 MB
[ 0.000000] Aperture from AGP @ f8000000 size 64 MB (APSIZE f30)
[ 0.000000] last_pfn = 0xbff30 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bff30000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bff30000 page 4k
[ 0.000000] kernel direct mapping tables up to bff30000 @ bff2b000-bff30000
[ 0.000000] RAMDISK: 36c96000 - 37643000
[ 0.000000] ACPI: RSDP 00000000000fa850 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000bff30000 00030 (v01 A M I OEMRSDT 06000517 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bff30200 00081 (v01 A M I OEMFACP 06000517 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bff303f0 038EA (v01 SK8V_ SK8V_033 00000033 MSFT 0100000D)
[ 0.000000] ACPI: FACS 00000000bff40000 00040
[ 0.000000] ACPI: APIC 00000000bff30390 00052 (v01 A M I OEMAPIC 06000517 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bff40040 0003F (v01 A M I OEMBIOS 06000517 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bff30000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000bff30000
[ 0.000000] NODE_DATA [00000000bff26000 - 00000000bff2afff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bff30
[ 0.000000] On node 0 totalpages: 786111
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10694 pages used for memmap
[ 0.000000] DMA32 zone: 771434 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ff80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfc00000 s78912 r8192 d23488 u1048576
[ 0.000000] pcpu-alloc: s78912 r8192 d23488 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775356
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-amd64 root=UUID=17ae8e4c-882c-4f4a-9b89-7815b7c9185d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ f8000000 old size 32 MB
[ 0.000000] Aperture from AGP @ f8000000 size 64 MB (APSIZE f30)
[ 0.000000] Node 0: aperture @ f8000000 size 64 MB
[ 0.000000] Memory: 3082856k/3144896k available (3325k kernel code, 452k absent, 61588k reserved, 3370k data, 560k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2202.866 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4405.73 BogoMIPS (lpj=8811464)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004173] Security Framework initialized
[ 0.004180] SELinux: Disabled at boot.
[ 0.004590] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008243] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009727] Mount-cache hash table entries: 256
[ 0.009930] Initializing cgroup subsys cpuacct
[ 0.009936] Initializing cgroup subsys memory
[ 0.009954] Initializing cgroup subsys devices
[ 0.009956] Initializing cgroup subsys freezer
[ 0.009959] Initializing cgroup subsys net_cls
[ 0.009962] Initializing cgroup subsys blkio
[ 0.010024] tseg: 0000000000
[ 0.010048] mce: CPU supports 5 MCE banks
[ 0.010084] SMP alternatives: switching to UP code
[ 0.012122] ACPI: Core revision 20110413
[ 0.015454] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.055156] CPU0: AMD Athlon(tm) 64 FX-51 Processor stepping 08
[ 0.056003] Performance Events: AMD PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 4
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000000f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Brought up 1 CPUs
[ 0.056003] Total of 1 processors activated (4405.73 BogoMIPS).
[ 0.056003] devtmpfs: initialized
[ 0.059405] PM: Registering ACPI NVS region at bff40000 (720896 bytes)
[ 0.059596] print_constraints: dummy:
[ 0.059674] NET: Registered protocol family 16
[ 0.059787] node 0 link 0: io port [1000, ffffff]
[ 0.059790] TOM: 00000000c0000000 aka 3072M
[ 0.059794] node 0 link 0: mmio [a0000, bffff]
[ 0.059797] node 0 link 0: mmio [c0000000, ffffffff]
[ 0.059800] bus: [00, ff] on node 0 link 0
[ 0.059803] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.059806] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.059808] bus: 00 index 2 [mem 0xc0000000-0xfcffffffff]
[ 0.059819] ACPI: bus type pci registered
[ 0.059891] PCI: Using configuration type 1 for base access
[ 0.060592] bio: create slab <bio-0> at 0
[ 0.061165] ACPI: EC: Look up EC in DSDT
[ 0.061957] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.064440] ACPI: Interpreter enabled
[ 0.064444] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.064468] ACPI: Using IOAPIC for interrupt routing
[ 0.069183] ACPI: No dock devices found.
[ 0.069186] HEST: Table not found.
[ 0.069189] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.069270] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.069445] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.069448] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.069451] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.069454] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff] (ignored)
[ 0.069473] pci 0000:00:00.0: [1106:3188] type 0 class 0x000600
[ 0.069482] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
[ 0.069543] pci 0000:00:01.0: [1106:b188] type 1 class 0x000604
[ 0.069575] pci 0000:00:01.0: supports D1
[ 0.069599] pci 0000:00:09.0: [1102:0004] type 0 class 0x000401
[ 0.069612] pci 0000:00:09.0: reg 10: [io 0xdc00-0xdc3f]
[ 0.069660] pci 0000:00:09.0: supports D1 D2
[ 0.069677] pci 0000:00:09.1: [1102:7003] type 0 class 0x000980
[ 0.069690] pci 0000:00:09.1: reg 10: [io 0xec00-0xec07]
[ 0.069737] pci 0000:00:09.1: supports D1 D2
[ 0.069755] pci 0000:00:09.2: [1102:4001] type 0 class 0x000c00
[ 0.069769] pci 0000:00:09.2: reg 10: [mem 0xfdc00000-0xfdc007ff]
[ 0.069778] pci 0000:00:09.2: reg 14: [mem 0xfdb00000-0xfdb03fff]
[ 0.069823] pci 0000:00:09.2: supports D1 D2
[ 0.069825] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.069830] pci 0000:00:09.2: PME# disabled
[ 0.069854] pci 0000:00:0a.0: [10b7:1700] type 0 class 0x000200
[ 0.069870] pci 0000:00:0a.0: reg 10: [mem 0xfdd00000-0xfdd03fff]
[ 0.069878] pci 0000:00:0a.0: reg 14: [io 0xb000-0xb0ff]
[ 0.069925] pci 0000:00:0a.0: supports D1 D2
[ 0.069927] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.069932] pci 0000:00:0a.0: PME# disabled
[ 0.069949] pci 0000:00:0d.0: [14e4:4320] type 0 class 0x000280
[ 0.069960] pci 0000:00:0d.0: reg 10: [mem 0xfde00000-0xfde01fff]
[ 0.070013] pci 0000:00:0f.0: [1106:3149] type 0 class 0x000104
[ 0.070027] pci 0000:00:0f.0: reg 10: [io 0xe400-0xe407]
[ 0.070035] pci 0000:00:0f.0: reg 14: [io 0xe000-0xe003]
[ 0.070044] pci 0000:00:0f.0: reg 18: [io 0xd800-0xd807]
[ 0.070052] pci 0000:00:0f.0: reg 1c: [io 0xd400-0xd403]
[ 0.070061] pci 0000:00:0f.0: reg 20: [io 0xd000-0xd00f]
[ 0.070069] pci 0000:00:0f.0: reg 24: [io 0xc800-0xc8ff]
[ 0.070111] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101
[ 0.070148] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f]
[ 0.070197] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.070232] pci 0000:00:10.0: reg 20: [io 0xb400-0xb41f]
[ 0.070258] pci 0000:00:10.0: supports D1 D2
[ 0.070261] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070265] pci 0000:00:10.0: PME# disabled
[ 0.070282] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.070317] pci 0000:00:10.1: reg 20: [io 0xb800-0xb81f]
[ 0.070343] pci 0000:00:10.1: supports D1 D2
[ 0.070345] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070349] pci 0000:00:10.1: PME# disabled
[ 0.070367] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 0.070402] pci 0000:00:10.2: reg 20: [io 0xc000-0xc01f]
[ 0.070428] pci 0000:00:10.2: supports D1 D2
[ 0.070430] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070434] pci 0000:00:10.2: PME# disabled
[ 0.070452] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03
[ 0.070487] pci 0000:00:10.3: reg 20: [io 0xc400-0xc41f]
[ 0.070512] pci 0000:00:10.3: supports D1 D2
[ 0.070515] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070519] pci 0000:00:10.3: PME# disabled
[ 0.070538] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03
[ 0.070551] pci 0000:00:10.4: reg 10: [mem 0xfdf00000-0xfdf000ff]
[ 0.070599] pci 0000:00:10.4: supports D1 D2
[ 0.070601] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.070606] pci 0000:00:10.4: PME# disabled
[ 0.070626] pci 0000:00:11.0: [1106:3227] type 0 class 0x000601
[ 0.070676] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.070681] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[ 0.070716] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[ 0.070731] pci 0000:00:11.5: reg 10: [io 0x1000-0x10ff]
[ 0.070782] pci 0000:00:11.5: supports D1 D2
[ 0.070800] pci 0000:00:11.6: [1106:3068] type 0 class 0x000780
[ 0.070814] pci 0000:00:11.6: reg 10: [io 0x0000-0x00ff]
[ 0.070883] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.070902] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.070918] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.070934] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.070953] PCI: peer root bus 00 res updated from pci conf
[ 0.070987] pci 0000:01:00.0: [1002:9596] type 0 class 0x000300
[ 0.071000] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.071007] pci 0000:01:00.0: reg 14: [io 0xa000-0xa0ff]
[ 0.071014] pci 0000:01:00.0: reg 18: [mem 0xfd400000-0xfd40ffff]
[ 0.071034] pci 0000:01:00.0: reg 30: [mem 0xfd300000-0xfd31ffff pref]
[ 0.071051] pci 0000:01:00.0: supports D1 D2
[ 0.071069] pci 0000:01:00.1: [1002:aa20] type 0 class 0x000403
[ 0.071081] pci 0000:01:00.1: reg 10: [mem 0xfd200000-0xfd203fff]
[ 0.071117] pci 0000:01:00.1: supports D1 D2
[ 0.071141] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.071145] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.071149] pci 0000:00:01.0: bridge window [mem 0xfcf00000-0xfd4fffff]
[ 0.071154] pci 0000:00:01.0: bridge window [mem 0xd4e00000-0xf4dfffff pref]
[ 0.071162] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.071403] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.076668] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 0.076718] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 0.076767] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 0.076816] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.076866] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.076915] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.076965] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.077014] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.077138] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.077141] vgaarb: loaded
[ 0.077143] vgaarb: bridge control possible 0000:01:00.0
[ 0.077190] PCI: Using ACPI for IRQ routing
[ 0.077194] PCI: pci_cache_line_size set to 64 bytes
[ 0.077201] pci 0000:00:00.0: address space collision: [mem 0xf8000000-0xfbffffff pref] conflicts with GART [mem 0xf8000000-0xfbffffff]
[ 0.077270] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.077273] reserve RAM buffer: 00000000bff30000 - 00000000bfffffff
[ 0.079333] pnp: PnP ACPI init
[ 0.079354] ACPI: bus type pnp registered
[ 0.079477] pnp 00:00: [bus 00-ff]
[ 0.079481] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.079484] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.079486] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.079489] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.079492] pnp 00:00: [mem 0x00000000 window]
[ 0.079495] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 0.079544] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.079567] pnp 00:01: [dma 4]
[ 0.079569] pnp 00:01: [io 0x0000-0x000f]
[ 0.079572] pnp 00:01: [io 0x0081-0x0083]
[ 0.079574] pnp 00:01: [io 0x0087]
[ 0.079577] pnp 00:01: [io 0x0089-0x008b]
[ 0.079579] pnp 00:01: [io 0x008f]
[ 0.079582] pnp 00:01: [io 0x00c0-0x00df]
[ 0.079608] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.079621] pnp 00:02: [io 0x0070-0x0071]
[ 0.079635] pnp 00:02: [irq 8]
[ 0.079662] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.079698] pnp 00:03: [io 0x0060]
[ 0.079700] pnp 00:03: [io 0x0064]
[ 0.079706] pnp 00:03: [irq 1]
[ 0.079739] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.079771] pnp 00:04: [io 0x0061]
[ 0.079799] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.079812] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.079818] pnp 00:05: [irq 13]
[ 0.079845] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.080207] pnp 00:06: [irq 6]
[ 0.080210] pnp 00:06: [dma 2]
[ 0.080212] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.080215] pnp 00:06: [io 0x03f7]
[ 0.080280] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.080431] pnp 00:07: [io 0x0010-0x001f]
[ 0.080434] pnp 00:07: [io 0x0022-0x003f]
[ 0.080437] pnp 00:07: [io 0x0044-0x005f]
[ 0.080439] pnp 00:07: [io 0x0062-0x0063]
[ 0.080442] pnp 00:07: [io 0x0065-0x006f]
[ 0.080444] pnp 00:07: [io 0x0072-0x007f]
[ 0.080447] pnp 00:07: [io 0x0080]
[ 0.080449] pnp 00:07: [io 0x0084-0x0086]
[ 0.080452] pnp 00:07: [io 0x0088]
[ 0.080454] pnp 00:07: [io 0x008c-0x008e]
[ 0.080456] pnp 00:07: [io 0x0090-0x009f]
[ 0.080459] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.080461] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.080464] pnp 00:07: [io 0x0295-0x0296]
[ 0.080466] pnp 00:07: [io 0x03e1-0x03e7]
[ 0.080470] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.080472] pnp 00:07: [io 0x0800-0x087f]
[ 0.080475] pnp 00:07: [io 0x0400-0x041f]
[ 0.080478] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.080523] pnp 00:07: disabling [io 0x0010-0x001f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080527] pnp 00:07: disabling [io 0x0022-0x003f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080531] pnp 00:07: disabling [io 0x0044-0x005f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080535] pnp 00:07: disabling [io 0x0062-0x0063] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080539] pnp 00:07: disabling [io 0x0065-0x006f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080542] pnp 00:07: disabling [io 0x0072-0x007f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080546] pnp 00:07: disabling [io 0x0080] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080550] pnp 00:07: disabling [io 0x0084-0x0086] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080554] pnp 00:07: disabling [io 0x0088] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080558] pnp 00:07: disabling [io 0x008c-0x008e] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080562] pnp 00:07: disabling [io 0x0090-0x009f] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080566] pnp 00:07: disabling [io 0x00a2-0x00bf] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080570] pnp 00:07: disabling [io 0x00e0-0x00ef] because it overlaps 0000:00:11.6 BAR 0 [io 0x0000-0x00ff]
[ 0.080612] system 00:07: [io 0x0295-0x0296] has been reserved
[ 0.080615] system 00:07: [io 0x03e1-0x03e7] has been reserved
[ 0.080619] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.080622] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.080625] system 00:07: [io 0x0400-0x041f] has been reserved
[ 0.080628] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.080706] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 0.080709] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 0.080712] pnp 00:08: [mem 0xfff80000-0xffffffff]
[ 0.080760] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.080763] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.080767] system 00:08: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.080770] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.080989] pnp 00:09: [mem 0x00000000-0x0009ffff]
[ 0.080992] pnp 00:09: [mem 0x000c0000-0x000dffff]
[ 0.080995] pnp 00:09: [mem 0x000e0000-0x000fffff]
[ 0.080997] pnp 00:09: [mem 0x00100000-0xbffeffff]
[ 0.081000] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.081006] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 0.081010] pnp 00:09: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 0.081015] pnp 00:09: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 0.081019] pnp 00:09: disabling [mem 0x00100000-0xbffeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x03ffffff pref]
[ 0.081069] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.081221] pnp: PnP ACPI: found 10 devices
[ 0.081223] ACPI: ACPI bus type pnp unregistered
[ 0.087760] Switching to clocksource acpi_pm
[ 0.087784] PCI: max bus depth: 1 pci_try_num: 2
[ 0.087798] pci 0000:00:11.6: BAR 0: assigned [io 0x1400-0x14ff]
[ 0.087804] pci 0000:00:11.6: BAR 0: set to [io 0x1400-0x14ff] (PCI address [0x1400-0x14ff])
[ 0.087808] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.087811] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.087816] pci 0000:00:01.0: bridge window [mem 0xfcf00000-0xfd4fffff]
[ 0.087820] pci 0000:00:01.0: bridge window [mem 0xd4e00000-0xf4dfffff pref]
[ 0.087832] pci 0000:00:01.0: setting latency timer to 64
[ 0.087836] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.087839] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.087842] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xfcffffffff]
[ 0.087845] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.087848] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfd4fffff]
[ 0.087850] pci_bus 0000:01: resource 2 [mem 0xd4e00000-0xf4dfffff pref]
[ 0.087948] NET: Registered protocol family 2
[ 0.087948] Switched to NOHz mode on CPU #0
[ 0.087948] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.087948] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.092261] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.092984] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.092987] TCP reno registered
[ 0.092997] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.093058] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.093272] NET: Registered protocol family 1
[ 0.093291] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.120042] pci 0000:01:00.0: Boot video device
[ 0.120048] PCI: CLS 64 bytes, default 64
[ 0.120105] Unpacking initramfs...
[ 0.403279] Freeing initrd memory: 9908k freed
[ 0.409847] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188]
[ 0.413186] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 0.413577] audit: initializing netlink socket (disabled)
[ 0.413590] type=2000 audit(1314308979.412:1): initialized
[ 0.440507] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.463804] VFS: Disk quotas dquot_6.5.2
[ 0.463849] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.463934] msgmni has been set to 6040
[ 0.464123] alg: No test for stdrng (krng)
[ 0.464163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.464167] io scheduler noop registered
[ 0.464169] io scheduler deadline registered
[ 0.464193] io scheduler cfq registered (default)
[ 0.464464] ERST: Table is not found!
[ 0.464541] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.464980] Linux agpgart interface v0.103
[ 0.465086] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.465089] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.465274] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.465353] mousedev: PS/2 mouse device common for all mice
[ 0.465389] rtc_cmos 00:02: RTC can wake from S4
[ 0.465532] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.465584] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.465596] cpuidle: using governor ladder
[ 0.465598] cpuidle: using governor menu
[ 0.465833] TCP cubic registered
[ 0.465915] NET: Registered protocol family 10
[ 0.466540] Mobile IPv6
[ 0.466543] NET: Registered protocol family 17
[ 0.466547] Registering the dns_resolver key type
[ 0.466663] PM: Hibernation image not present or could not be loaded.
[ 0.466673] registered taskstats version 1
[ 0.478796] rtc_cmos 00:02: setting system clock to 2011-08-25 21:49:39 UTC (1314308979)
[ 0.478841] Initializing network drop monitor service
[ 0.480348] Freeing unused kernel memory: 560k freed
[ 0.480582] Write protecting the kernel read-only data: 6144k
[ 0.484402] Freeing unused kernel memory: 752k freed
[ 0.488461] Freeing unused kernel memory: 720k freed
[ 0.504215] udevd[45]: starting version 172
[ 0.509103] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.594183] skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.594196] skge 0000:00:0a.0: PCI: Disallowing DAC for device
[ 0.594233] skge: 1.13 addr 0xfdd00000 irq 17 chip Yukon rev 1
[ 0.594810] skge 0000:00:0a.0: eth0: addr 00:0e:a6:20:4a:5e
[ 0.611111] usbcore: registered new interface driver usbfs
[ 0.611139] usbcore: registered new interface driver hub
[ 0.611585] firewire_ohci 0000:00:09.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.635562] Floppy drive(s): fd0 is 1.44M
[ 0.643378] usbcore: registered new device driver usb
[ 0.644035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.644544] SCSI subsystem initialized
[ 0.660488] FDC 0 is a post-1991 82077
[ 0.664203] firewire_ohci: Added fw-ohci device 0000:00:09.2, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x0
[ 0.664701] libata version 3.00 loaded.
[ 0.667895] b43-pci-bridge 0000:00:0d.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.667930] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[ 0.667936] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[ 0.667942] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[ 0.667947] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[ 0.667952] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[ 0.672126] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0d.0
[ 0.677492] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.677509] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.677539] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 0.677607] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000
[ 0.688029] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.688079] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.688083] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.688086] usb usb1: Product: EHCI Host Controller
[ 0.688088] usb usb1: Manufacturer: Linux 3.0.0-1-amd64 ehci_hcd
[ 0.688090] usb usb1: SerialNumber: 0000:00:10.4
[ 0.688225] hub 1-0:1.0: USB hub found
[ 0.688231] hub 1-0:1.0: 8 ports detected
[ 0.688852] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.690518] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.690530] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.690547] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.690584] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
[ 0.690632] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.690635] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.690638] usb usb2: Product: UHCI Host Controller
[ 0.690640] usb usb2: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
[ 0.690642] usb usb2: SerialNumber: 0000:00:10.0
[ 0.690856] hub 2-0:1.0: USB hub found
[ 0.690863] hub 2-0:1.0: 2 ports detected
[ 0.691514] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.691521] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.691531] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.691555] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
[ 0.691594] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.691597] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.691600] usb usb3: Product: UHCI Host Controller
[ 0.691602] usb usb3: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
[ 0.691605] usb usb3: SerialNumber: 0000:00:10.1
[ 0.691770] hub 3-0:1.0: USB hub found
[ 0.691775] hub 3-0:1.0: 2 ports detected
[ 0.693369] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.693379] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.693393] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.693425] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
[ 0.693471] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.693474] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.693477] usb usb4: Product: UHCI Host Controller
[ 0.693480] usb usb4: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
[ 0.693482] usb usb4: SerialNumber: 0000:00:10.2
[ 0.693686] hub 4-0:1.0: USB hub found
[ 0.693691] hub 4-0:1.0: 2 ports detected
[ 0.693804] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.693811] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.693819] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 0.693841] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
[ 0.693877] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.693880] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.693883] usb usb5: Product: UHCI Host Controller
[ 0.693885] usb usb5: Manufacturer: Linux 3.0.0-1-amd64 uhci_hcd
[ 0.693888] usb usb5: SerialNumber: 0000:00:10.3
[ 0.694032] hub 5-0:1.0: USB hub found
[ 0.694037] hub 5-0:1.0: 2 ports detected
[ 0.694774] sata_via 0000:00:0f.0: version 2.6
[ 0.694798] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.694842] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 0.696839] scsi0 : sata_via
[ 0.697013] scsi1 : sata_via
[ 0.697061] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd000 irq 20
[ 0.697064] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xd008 irq 20
[ 0.698737] pata_via 0000:00:0f.1: version 0.3.4
[ 0.698754] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.699369] scsi2 : pata_via
[ 0.699470] scsi3 : pata_via
[ 0.701066] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.701069] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.872401] ata3.01: ATAPI: _NEC DVD_RW ND-3540A, 1.04, max UDMA/33
[ 0.888267] ata3.01: configured for UDMA/33
[ 0.900013] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.000019] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 1.064411] ata1.00: ATA-8: ST3500418AS, CC46, max UDMA/133
[ 1.064414] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.080412] ata1.00: configured for UDMA/133
[ 1.080536] scsi 0:0:0:0: Direct-Access ATA ST3500418AS CC46 PQ: 0 ANSI: 5
[ 1.164392] firewire_core: created device fw0: GUID 00023c0141011d63, S400
[ 1.164408] firewire_core: phy config: card 0, new root=ffc1, gap_count=5
[ 1.281105] usb 1-1: New USB device found, idVendor=1307, idProduct=0330
[ 1.281108] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.281111] usb 1-1: Product: Mass Storage Device
[ 1.281113] usb 1-1: Manufacturer: Generic
[ 1.281115] usb 1-1: SerialNumber: 00000000000006
[ 1.284053] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.285065] usbcore: registered new interface driver uas
[ 1.448267] usb 1-4: new high speed USB device number 4 using ehci_hcd
[ 1.449179] ata2.00: ATA-7: Maxtor 6L160M0, BANC1G10, max UDMA/133
[ 1.449183] ata2.00: 320173056 sectors, multi 16: LBA48 NCQ (not used)
[ 1.465161] ata2.00: configured for UDMA/133
[ 1.465281] scsi 1:0:0:0: Direct-Access ATA Maxtor 6L160M0 BANC PQ: 0 ANSI: 5
[ 1.466523] scsi 2:0:1:0: CD-ROM _NEC DVD_RW ND-3540A 1.04 PQ: 0 ANSI: 5
[ 1.580972] usb 1-4: New USB device found, idVendor=1058, idProduct=1021
[ 1.580975] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.580978] usb 1-4: Product: Ext HDD 1021
[ 1.580980] usb 1-4: Manufacturer: Western Digital
[ 1.580982] usb 1-4: SerialNumber: 574341563538353939323438
[ 1.585888] Initializing USB Mass Storage driver...
[ 1.586012] scsi4 : usb-storage 1-1:1.0
[ 1.586176] scsi5 : usb-storage 1-4:1.0
[ 1.586285] usbcore: registered new interface driver usb-storage
[ 1.586287] USB Mass Storage support registered.
[ 1.643339] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.643393] sd 0:0:0:0: [sda] Write Protect is off
[ 1.643396] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.643419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.643944] sd 1:0:0:0: [sdb] 320173056 512-byte logical blocks: (163 GB/152 GiB)
[ 1.643993] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.644032] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.644066] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.645941] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.645945] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.646226] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 1.676103] sda: sda1 sda2 < sda5 >
[ 1.676432] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.681978] sdb: sdb1 sdb2 sdb3
[ 1.682290] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.686167] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.686231] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.686298] sr 2:0:1:0: Attached scsi generic sg2 type 5
[ 1.820044] usb 2-2: new low speed USB device number 2 using uhci_hcd
[ 1.996414] usb 2-2: New USB device found, idVendor=046d, idProduct=c03d
[ 1.996419] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.996422] usb 2-2: Product: USB-PS/2 Optical Mouse
[ 1.996425] usb 2-2: Manufacturer: Logitech
[ 2.017235] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input1
[ 2.017622] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.0-2/input0
[ 2.017869] usbcore: registered new interface driver usbhid
[ 2.017871] usbhid: USB HID core driver
[ 2.084688] PM: Starting manual resume from disk
[ 2.084693] PM: Hibernation image partition 8:5 present
[ 2.084695] PM: Looking for hibernation image.
[ 2.092426] PM: Image not found (code -22)
[ 2.092428] PM: Hibernation image not present or could not be loaded.
[ 2.151254] EXT3-fs: barriers not enabled
[ 2.168867] kjournald starting. Commit interval 5 seconds
[ 2.169059] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 2.584710] scsi 4:0:0:0: Direct-Access Generic Compact Flash 0.00 PQ: 0 ANSI: 2
[ 2.584949] scsi 5:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4
[ 2.585199] scsi 4:0:0:1: Direct-Access Generic SD/MMC 0.00 PQ: 0 ANSI: 2
[ 2.585480] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 2.585702] scsi 4:0:0:2: Direct-Access Generic MS/MS-PRO 0.00 PQ: 0 ANSI: 2
[ 2.585945] sd 5:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.586203] scsi 4:0:0:3: Direct-Access Generic SM/xD-Picture 0.00 PQ: 0 ANSI: 2
[ 2.586630] sd 4:0:0:0: Attached scsi generic sg4 type 0
[ 2.586792] sd 4:0:0:1: Attached scsi generic sg5 type 0
[ 2.586821] sd 5:0:0:0: [sdc] Test WP failed, assume Write Enabled
[ 2.586986] sd 4:0:0:2: Attached scsi generic sg6 type 0
[ 2.587162] sd 4:0:0:3: Attached scsi generic sg7 type 0
[ 2.587693] sd 5:0:0:0: [sdc] Asking for cache data failed
[ 2.587745] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 2.589443] sd 5:0:0:0: [sdc] Test WP failed, assume Write Enabled
[ 2.590318] sd 5:0:0:0: [sdc] Asking for cache data failed
[ 2.590368] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 2.592191] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[ 2.592815] sd 4:0:0:2: [sdf] Attached SCSI removable disk
[ 2.594108] sd 4:0:0:1: [sde] Attached SCSI removable disk
[ 2.594690] sd 4:0:0:3: [sdg] Attached SCSI removable disk
[ 2.596836] sdc: sdc1
[ 2.598744] sd 5:0:0:0: [sdc] Test WP failed, assume Write Enabled
[ 2.599566] sd 5:0:0:0: [sdc] Asking for cache data failed
[ 2.599615] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 2.599666] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 3.649274] udevd[272]: starting version 172
[ 4.288858] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 4.288867] ACPI: Power Button [PWRB]
[ 4.288944] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 4.288948] ACPI: Sleep Button [SLPB]
[ 4.289009] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.289013] ACPI: Power Button [PWRF]
[ 4.314629] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 4.677784] MCE: In-kernel MCE decoding enabled.
[ 4.695682] EDAC MC: Ver: 2.1.0
[ 4.704446] AMD64 EDAC driver v3.4.0
[ 4.704801] EDAC amd64: DRAM ECC enabled.
[ 4.704807] EDAC amd64: K8 revE or earlier detected (node 0).
[ 4.704845] EDAC amd64: CS0: Registered Double data rate SDRAM
[ 4.704848] EDAC amd64: CS1: Registered Double data rate SDRAM
[ 4.704850] EDAC amd64: CS2: Registered Double data rate SDRAM
[ 4.705228] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2
[ 4.705312] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 4.719837] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.721602] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.842011] ACPI: acpi_idle registered with cpuidle
[ 4.842058] ACPI: processor limited to max C-state 1
[ 4.889151] gameport gameport0: EMU10K1 is pci0000:00:09.1/gameport0, io 0xec00, speed 1156kHz
[ 5.067461] Disabling lock debugging due to kernel taint
[ 5.067494] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 5.325413] [fglrx] Maximum main memory to use for locked dma buffers: 2876 MBytes.
[ 5.325568] [fglrx] vendor: 1002 device: 9596 count: 1
[ 5.325928] [fglrx] ioport: bar 1, base 0xa000, size: 0x100
[ 5.325956] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.325989] pci 0000:01:00.0: PCI: Disallowing DAC for device
[ 5.326204] [fglrx] Kernel PAT support is enabled
[ 5.326234] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
[ 5.410029] cfg80211: Calling CRDA to update world regulatory domain
[ 5.625324] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.625414] HDA Intel 0000:01:00.1: PCI: Disallowing DAC for device
[ 5.697277] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 5.707296] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 5.707647] input: HDA ATI HDMI HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 5.717181] EMU10K1_Audigy 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.719847] Installing spdif_bug patch: SB Audigy 2 ZS [SB0360]
[ 5.839566] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.840246] Registered led device: b43-phy0::tx
[ 5.840268] Registered led device: b43-phy0::rx
[ 5.840290] Registered led device: b43-phy0::radio
[ 5.840309] Broadcom 43xx driver loaded [ Features: PMNLS, Firmware-ID: FW13 ]
[ 7.867993] Adding 6041596k swap on /dev/sda5. Priority:-1 extents:1 across:6041596k
[ 8.064837] EXT3-fs (sda1): using internal journal
[ 8.214378] loop: module loaded
[ 8.962950] IPv6 over IPv4 tunneling driver
[ 9.514179] RPC: Registered named UNIX socket transport module.
[ 9.514183] RPC: Registered udp transport module.
[ 9.514185] RPC: Registered tcp transport module.
[ 9.514188] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.588052] FS-Cache: Loaded
[ 9.630941] FS-Cache: Netfs 'nfs' registered for caching
[ 9.651987] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 9.800522] skge 0000:00:0a.0: eth0: enabling interface
[ 10.043373] fuse init (API version 7.16)
[ 11.551435] skge 0000:00:0a.0: eth0: Link is up at 100 Mbps, full duplex, flow control none
Reply to: