Package: linux-2.6 Version: 3.0.0-1 Severity: important Tags: wheezy After updating to latest kernel I faced these problems: 1. NetworkManager seems non-operative (meaning that no wireless network is available anymore) 2. System hangs at rebooting, which requires me to hard reset the computer I am attaching full dmesg and an image for the hanging at reboot. This is a Compaq Mini CQ10 netbook (Atom). This system is currently running 2.6.39 kernel. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information not available ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at 94180000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 30c0 [size=8] Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at 94000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at 94100000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at 94200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 93000000-93ffffff Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: 92000000-92ffffff Prefetchable memory behind bridge: 0000000091000000-0000000091ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 3080 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 3060 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 3040 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at 3020 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at 94204400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 42 Region 0: I/O ports at 30b8 [size=8] Region 1: I/O ports at 30cc [size=4] Region 2: I/O ports at 30b0 [size=8] Region 3: I/O ports at 30c8 [size=4] Region 4: I/O ports at 30a0 [size=16] Region 5: Memory at 94204000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 3000 [size=32] Kernel driver in use: i801_smbus 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at 90004000 (64-bit, prefetchable) [size=4K] Region 4: Memory at 90000000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 01:00.1 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5288] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:148a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at 93000000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:145c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at 92000000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:1122 Syntek -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.39-2-686-pae (SMP w/2 CPU cores) Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.0.0-1-686-pae depends on: ii debconf [debconf-2.0] 1.5.40 Debian configuration management sy ii initramfs-tools [linux-initra 0.99 tools for generating an initramfs ii linux-base 3.3 Linux image base package ii module-init-tools 3.16-1 tools for managing Linux kernel mo Versions of packages linux-image-3.0.0-1-686-pae recommends: ii firmware-linux-free 3 Binary firmware for various driver ii libc6-i686 2.13-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-3.0.0-1-686-pae suggests: ii grub-pc 1.99-9 GRand Unified Bootloader, version pn linux-doc-3.0.0 <none> (no description available) Versions of packages linux-image-3.0.0-1-686-pae is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) ii firmware-ralink 0.33 Binary firmware for Ralink wireles pn xen-hypervisor <none> (no description available) -- debconf information excluded
Attachment:
reboot_hangs.JPG
Description: JPEG image
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-1-686-pae (Debian 3.0.0-1) (ben@decadent.org.uk) (gcc version 4.5.3 (Debian 4.5.3-3) ) #1 SMP Sun Jul 24 14:27:32 UTC 2011 [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f43f000 (usable) [ 0.000000] BIOS-e820: 000000007f43f000 - 000000007f4bf000 (reserved) [ 0.000000] BIOS-e820: 000000007f4bf000 - 000000007f5bf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f5bf000 - 000000007f5f7000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f5f7000 - 000000007f600000 (usable) [ 0.000000] BIOS-e820: 000000007f600000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: Hewlett-Packard Compaq Mini CQ10-500 /148A, BIOS F.14 11/12/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7f600 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFE00000 mask 0FFE00000 write-protect [ 0.000000] 1 base 000000000 mask 0C0000000 write-back [ 0.000000] 2 base 040000000 mask 0C0000000 write-back [ 0.000000] 3 base 07F800000 mask 0FF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000 [ 0.000000] RAMDISK: 37b6a000 - 37dad000 [ 0.000000] Allocated new RAMDISK: 377bb000 - 379fd217 [ 0.000000] Move RAMDISK from 0000000037b6a000 - 0000000037dac216 to 377bb000 - 379fd216 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 7f5f6120 00074 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 7f5f5000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 7f5e6000 0BA96 (v01 HP SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: FACS 7f589000 00040 [ 0.000000] ACPI: HPET 7f5f4000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 7f5f3000 00078 (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 7f5f2000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 7f5e5000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: BOOT 7f5e4000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 7f5e3000 004C4 (v02 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 7f5e2000 001F7 (v02 PmRef Cpu0Tst 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 7f5e1000 00064 (v02 PmRef Cpu1Tst 00003000 INTL 20051117) [ 0.000000] ACPI: WDAT 7f5e0000 00194 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1148MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x0007f600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f43f [ 0.000000] 0: 0x0007f5f7 -> 0x0007f600 [ 0.000000] On node 0 totalpages: 521175 [ 0.000000] free_area_init_node: node 0, pgdat c141c980, node_mem_map f67ca200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2297 pages used for memmap [ 0.000000] HighMem zone: 291153 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @f6400000 s28864 r0 d24384 u524288 [ 0.000000] pcpu-alloc: s28864 r0 d24384 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517098 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-1-686-pae root=UUID=ef88aa1c-5071-41ac-8884-6c991eca9b22 ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:0007f600) [ 0.000000] Memory: 2059732k/2086912k available (2764k kernel code, 24968k reserved, 1474k data, 404k init, 1173800k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc1424000 - 0xc1489000 ( 404 kB) [ 0.000000] .data : 0xc12b326c - 0xc1423b80 (1474 kB) [ 0.000000] .text : 0xc1000000 - 0xc12b326c (2764 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:1280 [ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1662.409 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.81 BogoMIPS (lpj=6649636) [ 0.004016] pid_max: default: 32768 minimum: 301 [ 0.004125] Security Framework initialized [ 0.004133] SELinux: Disabled at boot. [ 0.004183] Mount-cache hash table entries: 512 [ 0.008012] Initializing cgroup subsys cpuacct [ 0.008062] Initializing cgroup subsys memory [ 0.008093] Initializing cgroup subsys devices [ 0.008099] Initializing cgroup subsys freezer [ 0.008104] Initializing cgroup subsys net_cls [ 0.008109] Initializing cgroup subsys blkio [ 0.008171] Disabled fast string operations [ 0.008180] CPU: Physical Processor ID: 0 [ 0.008184] CPU: Processor Core ID: 0 [ 0.008189] mce: CPU supports 5 MCE banks [ 0.008201] CPU0: Thermal monitoring handled by SMI [ 0.008208] using mwait in idle threads. [ 0.008723] ACPI: Core revision 20110413 [ 0.024112] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.024533] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067543] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a [ 0.068003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.068003] ... version: 3 [ 0.068003] ... bit width: 40 [ 0.068003] ... generic registers: 2 [ 0.068003] ... value mask: 000000ffffffffff [ 0.068003] ... max period: 000000007fffffff [ 0.068003] ... fixed-purpose events: 3 [ 0.068003] ... event mask: 0000000700000003 [ 0.068003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.068003] CPU 1 irqstacks, hard=f60f4000 soft=f60f6000 [ 0.068003] Booting Node 0, Processors #1 [ 0.068003] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.008000] Disabled fast string operations [ 0.008000] CPU1: Thermal monitoring handled by SMI [ 0.160062] NMI watchdog enabled, takes one hw-pmu counter. [ 0.160138] Brought up 2 CPUs [ 0.160146] Total of 2 processors activated (6650.14 BogoMIPS). [ 0.160876] devtmpfs: initialized [ 0.160876] PM: Registering ACPI NVS region at 7f4bf000 (1048576 bytes) [ 0.160876] print_constraints: dummy: [ 0.160876] NET: Registered protocol family 16 [ 0.160924] ACPI: bus type pci registered [ 0.161193] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.161202] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.161206] PCI: Using MMCONFIG for extended config space [ 0.161211] PCI: Using configuration type 1 for base access [ 0.164147] bio: create slab <bio-0> at 0 [ 0.167193] ACPI: EC: Look up EC in DSDT [ 0.170626] ACPI: Executed 1 blocks of module-level executable AML code [ 0.175005] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.175994] ACPI: SSDT 7f494c98 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.176812] ACPI: Dynamic OEM Table Load: [ 0.176820] ACPI: SSDT (null) 001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.177120] ACPI: SSDT 7f493e18 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.177873] ACPI: Dynamic OEM Table Load: [ 0.177880] ACPI: SSDT (null) 001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.200644] ACPI: SSDT 7f494f18 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.201428] ACPI: Dynamic OEM Table Load: [ 0.201435] ACPI: SSDT (null) 000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117) [ 0.201712] ACPI: SSDT 7f492f18 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 0.202466] ACPI: Dynamic OEM Table Load: [ 0.202473] ACPI: SSDT (null) 00083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117) [ 1.028509] ACPI: Interpreter enabled [ 1.028521] ACPI: (supports S0 S3 S4 S5) [ 1.028596] ACPI: Using IOAPIC for interrupt routing [ 1.042927] ACPI: Power Resource [FN00] (on) [ 1.043693] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 1.044090] ACPI: No dock devices found. [ 1.044096] HEST: Table not found. [ 1.044105] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.045101] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-352) [ 1.045120] \_SB_.PCI0:_OSC evaluation returned wrong type [ 1.045124] _OSC request data:1 8 1f [ 1.045135] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 1.046816] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.046824] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.046831] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.046839] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] [ 1.046866] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600 [ 1.046928] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300 [ 1.046944] pci 0000:00:02.0: reg 10: [mem 0x94180000-0x941fffff] [ 1.046954] pci 0000:00:02.0: reg 14: [io 0x30c0-0x30c7] [ 1.046965] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff pref] [ 1.046975] pci 0000:00:02.0: reg 1c: [mem 0x94000000-0x940fffff] [ 1.047021] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380 [ 1.047035] pci 0000:00:02.1: reg 10: [mem 0x94100000-0x9417ffff] [ 1.047145] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 1.047172] pci 0000:00:1b.0: reg 10: [mem 0x94200000-0x94203fff 64bit] [ 1.047261] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.047270] pci 0000:00:1b.0: PME# disabled [ 1.047308] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 1.047398] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.047406] pci 0000:00:1c.0: PME# disabled [ 1.047445] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 1.047536] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.047544] pci 0000:00:1c.1: PME# disabled [ 1.047589] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 1.047650] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f] [ 1.047704] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 1.047766] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f] [ 1.047817] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 1.047878] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f] [ 1.047932] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 1.048000] pci 0000:00:1d.3: reg 20: [io 0x3020-0x303f] [ 1.048080] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 1.048769] pci 0000:00:1d.7: reg 10: [mem 0x94204400-0x942047ff] [ 1.052758] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.052768] pci 0000:00:1d.7: PME# disabled [ 1.052804] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 1.052902] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601 [ 1.053067] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106 [ 1.053093] pci 0000:00:1f.2: reg 10: [io 0x30b8-0x30bf] [ 1.053108] pci 0000:00:1f.2: reg 14: [io 0x30cc-0x30cf] [ 1.053122] pci 0000:00:1f.2: reg 18: [io 0x30b0-0x30b7] [ 1.053137] pci 0000:00:1f.2: reg 1c: [io 0x30c8-0x30cb] [ 1.053151] pci 0000:00:1f.2: reg 20: [io 0x30a0-0x30af] [ 1.053168] pci 0000:00:1f.2: reg 24: [mem 0x94204000-0x942043ff] [ 1.053214] pci 0000:00:1f.2: PME# supported from D3hot [ 1.053222] pci 0000:00:1f.2: PME# disabled [ 1.053250] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 1.053326] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f] [ 1.053511] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200 [ 1.053580] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff] [ 1.053693] pci 0000:01:00.0: reg 18: [mem 0x90004000-0x90004fff 64bit pref] [ 1.053769] pci 0000:01:00.0: reg 20: [mem 0x90000000-0x90003fff 64bit pref] [ 1.053973] pci 0000:01:00.0: supports D1 D2 [ 1.053979] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.053997] pci 0000:01:00.0: PME# disabled [ 1.054176] pci 0000:01:00.1: [10ec:5288] type 0 class 0x00ff00 [ 1.054245] pci 0000:01:00.1: reg 10: [mem 0x93000000-0x9300ffff] [ 1.054647] pci 0000:01:00.1: supports D1 D2 [ 1.054653] pci 0000:01:00.1: PME# supported from D1 D2 D3hot D3cold [ 1.054670] pci 0000:01:00.1: PME# disabled [ 1.054891] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 1.054900] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.054909] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] [ 1.054921] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 1.055031] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280 [ 1.055080] pci 0000:02:00.0: reg 10: [mem 0x92000000-0x92003fff 64bit] [ 1.055263] pci 0000:02:00.0: supports D1 D2 [ 1.055366] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.055374] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 1.055383] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] [ 1.055394] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 1.055492] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode) [ 1.055501] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.055510] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.055523] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.055530] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.055536] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.055543] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.055550] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode) [ 1.055577] pci_bus 0000:00: on NUMA node 0 [ 1.055585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.055919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 1.056189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 1.056336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 1.056676] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-352) [ 1.056694] \_SB_.PCI0:_OSC evaluation returned wrong type [ 1.056698] _OSC request data:1 1f 1f [ 1.056709] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 1.056856] ACPI Warning: For \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110413/nspredef-352) [ 1.056873] \_SB_.PCI0:_OSC evaluation returned wrong type [ 1.056877] _OSC request data:1 0 1d [ 1.056887] pci0000:00: ACPI _OSC request failed (AE_TYPE), returned control mask: 0x1d [ 1.056891] ACPI _OSC control for PCIe not granted, disabling ASPM [ 1.063749] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 1.063904] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12) [ 1.064077] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 1.064232] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 1.064384] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 1.064537] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 1.064694] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 1.064849] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 1.065117] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.065139] vgaarb: loaded [ 1.065143] vgaarb: bridge control possible 0000:00:02.0 [ 1.065241] PCI: Using ACPI for IRQ routing [ 1.074158] PCI: pci_cache_line_size set to 64 bytes [ 1.074299] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 1.074306] reserve RAM buffer: 000000007f43f000 - 000000007fffffff [ 1.074313] reserve RAM buffer: 000000007f600000 - 000000007fffffff [ 1.074592] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.074609] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.074620] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.080113] Switching to clocksource hpet [ 1.083062] pnp: PnP ACPI init [ 1.083099] ACPI: bus type pnp registered [ 1.083868] Switched to NOHz mode on CPU #0 [ 1.084002] Switched to NOHz mode on CPU #1 [ 1.084909] pnp 00:00: [bus 00-ff] [ 1.084917] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.084923] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.084929] pnp 00:00: [io 0x0d00-0xffff window] [ 1.084935] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.084941] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 1.084947] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 1.084957] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 1.084963] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 1.084969] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 1.084975] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 1.084981] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 1.084988] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 1.084994] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 1.085000] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 1.085006] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 1.085012] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 1.085018] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 1.085024] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 1.085149] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.085472] pnp 00:01: [io 0x002e-0x002f] [ 1.085479] pnp 00:01: [io 0x004e-0x004f] [ 1.085484] pnp 00:01: [io 0x0061] [ 1.085489] pnp 00:01: [io 0x0070] [ 1.085494] pnp 00:01: [io 0x0080] [ 1.085499] pnp 00:01: [io 0x0092] [ 1.085504] pnp 00:01: [io 0x00b2-0x00b3] [ 1.085509] pnp 00:01: [io 0x0063] [ 1.085514] pnp 00:01: [io 0x0065] [ 1.085519] pnp 00:01: [io 0x0067] [ 1.085524] pnp 00:01: [io 0x0600-0x060f] [ 1.085530] pnp 00:01: [io 0x0610] [ 1.085535] pnp 00:01: [io 0x0800-0x080f] [ 1.085540] pnp 00:01: [io 0x0810-0x0817] [ 1.085545] pnp 00:01: [io 0x0400-0x047f] [ 1.085551] pnp 00:01: [io 0x0500-0x053f] [ 1.085556] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 1.085562] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 1.085568] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 1.085574] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 1.085579] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 1.085585] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 1.085591] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 1.085735] system 00:01: [io 0x0600-0x060f] has been reserved [ 1.085742] system 00:01: [io 0x0610] has been reserved [ 1.085749] system 00:01: [io 0x0800-0x080f] has been reserved [ 1.085756] system 00:01: [io 0x0810-0x0817] has been reserved [ 1.085764] system 00:01: [io 0x0400-0x047f] has been reserved [ 1.085771] system 00:01: [io 0x0500-0x053f] has been reserved [ 1.085779] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 1.085787] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.085794] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 1.085801] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.085809] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.085817] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.085824] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.085832] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.085860] pnp 00:02: [io 0x0000-0x001f] [ 1.085866] pnp 00:02: [io 0x0081-0x0091] [ 1.085871] pnp 00:02: [io 0x0093-0x009f] [ 1.085877] pnp 00:02: [io 0x00c0-0x00df] [ 1.085882] pnp 00:02: [dma 4] [ 1.085951] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.086016] pnp 00:03: [io 0x0070-0x0077] [ 1.086093] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.086258] pnp 00:04: [irq 0 disabled] [ 1.086275] pnp 00:04: [irq 8] [ 1.086281] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 1.086355] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.086388] pnp 00:05: [io 0x00f0] [ 1.086403] pnp 00:05: [irq 13] [ 1.086476] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.086507] pnp 00:06: [mem 0xff800000-0xffffffff] [ 1.086578] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active) [ 1.086634] pnp 00:07: [io 0x0060] [ 1.086639] pnp 00:07: [io 0x0064] [ 1.086651] pnp 00:07: [irq 1] [ 1.086728] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.086777] pnp 00:08: [irq 12] [ 1.086855] pnp 00:08: Plug and Play ACPI device, IDs SYN1e33 SYN1e00 SYN0002 PNP0f13 (active) [ 1.087037] pnp: PnP ACPI: found 9 devices [ 1.087041] ACPI: ACPI bus type pnp unregistered [ 1.087048] PnPBIOS: Disabled by ACPI PNP [ 1.126259] PCI: max bus depth: 1 pci_try_num: 2 [ 1.126308] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 1.126316] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.126327] pci 0000:00:1c.0: bridge window [mem 0x93000000-0x93ffffff] [ 1.126337] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref] [ 1.126349] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.126357] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] [ 1.126367] pci 0000:00:1c.1: bridge window [mem 0x92000000-0x92ffffff] [ 1.126376] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref] [ 1.126388] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 1.126393] pci 0000:00:1e.0: bridge window [io disabled] [ 1.126402] pci 0000:00:1e.0: bridge window [mem disabled] [ 1.126409] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.126442] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.126453] pci 0000:00:1c.0: setting latency timer to 64 [ 1.126471] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.126480] pci 0000:00:1c.1: setting latency timer to 64 [ 1.126493] pci 0000:00:1e.0: setting latency timer to 64 [ 1.126502] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.126508] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.126514] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.126521] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff] [ 1.126527] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 1.126533] pci_bus 0000:01: resource 1 [mem 0x93000000-0x93ffffff] [ 1.126540] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref] [ 1.126547] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 1.126553] pci_bus 0000:02: resource 1 [mem 0x92000000-0x92ffffff] [ 1.126559] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref] [ 1.126566] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 1.126572] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 1.126578] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 1.126585] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff] [ 1.126732] NET: Registered protocol family 2 [ 1.126954] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.127648] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.128632] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.129063] TCP: Hash tables configured (established 131072 bind 65536) [ 1.129069] TCP reno registered [ 1.129077] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.129095] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.129569] NET: Registered protocol family 1 [ 1.129607] pci 0000:00:02.0: Boot video device [ 1.144096] PCI: CLS 64 bytes, default 64 [ 1.144203] Unpacking initramfs... [ 1.261138] Freeing initrd memory: 2316k freed [ 1.262817] Simple Boot Flag at 0x44 set to 0x1 [ 1.263741] audit: initializing netlink socket (disabled) [ 1.263763] type=2000 audit(1312911628.256:1): initialized [ 1.295566] highmem bounce pool size: 64 pages [ 1.295578] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.304844] VFS: Disk quotas dquot_6.5.2 [ 1.305015] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.305257] msgmni has been set to 1734 [ 1.305692] alg: No test for stdrng (krng) [ 1.305777] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.305785] io scheduler noop registered [ 1.305789] io scheduler deadline registered [ 1.305825] io scheduler cfq registered (default) [ 1.306012] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.306085] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 1.306214] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.306281] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 1.306665] ERST: Table is not found! [ 1.306695] isapnp: Scanning for PnP cards... [ 1.660530] isapnp: No Plug & Play device found [ 1.660680] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.661944] Linux agpgart interface v0.103 [ 1.662179] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset [ 1.662396] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.662657] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 1.662888] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [ 1.663217] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 1.668691] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.668709] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.669016] mousedev: PS/2 mouse device common for all mice [ 1.669134] rtc_cmos 00:03: RTC can wake from S4 [ 1.669303] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.669342] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.669370] cpuidle: using governor ladder [ 1.669375] cpuidle: using governor menu [ 1.670018] TCP cubic registered [ 1.670128] NET: Registered protocol family 10 [ 1.671684] Mobile IPv6 [ 1.671691] NET: Registered protocol family 17 [ 1.671701] Registering the dns_resolver key type [ 1.671741] Using IPI No-Shortcut mode [ 1.671971] PM: Hibernation image not present or could not be loaded. [ 1.671993] registered taskstats version 1 [ 1.677160] rtc_cmos 00:03: setting system clock to 2011-08-09 17:40:29 UTC (1312911629) [ 1.677266] Initializing network drop monitor service [ 1.677510] Freeing unused kernel memory: 404k freed [ 1.677866] Write protecting the kernel text: 2768k [ 1.677941] Write protecting the kernel read-only data: 1068k [ 1.677946] NX-protecting the kernel data: 3376k [ 1.708482] udevd[48]: starting version 172 [ 1.794986] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.827694] ACPI Warning: For \_TZ_.THRM._AL0: Return Package has no elements (empty) (20110413/nspredef-456) [ 1.827716] ACPI: [Package] has zero elements (f59c0ca0) [ 1.827802] ACPI: Invalid active0 threshold [ 1.832103] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.832112] ACPI: Thermal Zone [THRM] (46 C) [ 1.884386] SCSI subsystem initialized [ 1.899547] libata version 3.00 loaded. [ 1.902058] ahci 0000:00:1f.2: version 3.0 [ 1.902091] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.902187] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 1.902372] ahci: SSS flag set, parallel bus scan disabled [ 1.902430] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode [ 1.902442] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part [ 1.902456] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.904531] scsi0 : ahci [ 1.904892] scsi1 : ahci [ 1.905153] scsi2 : ahci [ 1.905418] scsi3 : ahci [ 1.906202] ata1: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204100 irq 42 [ 1.906215] ata2: SATA max UDMA/133 abar m1024@0x94204000 port 0x94204180 irq 42 [ 1.906223] ata3: DUMMY [ 1.906228] ata4: DUMMY [ 2.260040] Refined TSC clocksource calibration: 1662.681 MHz. [ 2.260052] Switching to clocksource tsc [ 2.396034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.396860] ata1.00: unexpected _GTF length (4) [ 2.446288] ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133 [ 2.446295] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.448075] ata1.00: unexpected _GTF length (4) [ 2.448419] ata1.00: configured for UDMA/133 [ 2.448711] scsi 0:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5 [ 2.768036] ata2: SATA link down (SStatus 0 SControl 300) [ 2.780672] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.780894] sd 0:0:0:0: [sda] Write Protect is off [ 2.780905] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.781014] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.903366] sda: sda1 sda2 [ 2.904263] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.366117] PM: Starting manual resume from disk [ 3.366125] PM: Hibernation image partition 8:1 present [ 3.366129] PM: Looking for hibernation image. [ 3.366475] PM: Image not found (code -22) [ 3.366480] PM: Hibernation image not present or could not be loaded. [ 3.376810] REISERFS (device sda2): found reiserfs format "3.6" with standard journal [ 3.376839] REISERFS (device sda2): using ordered data mode [ 3.383898] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 3.384818] REISERFS (device sda2): checking transaction log (sda2) [ 3.455988] REISERFS (device sda2): Using r5 hash to sort names [ 5.409438] udevd[227]: starting version 172 [ 6.225400] ACPI: acpi_idle registered with cpuidle [ 6.250133] Marking TSC unstable due to TSC halts in idle [ 6.257854] Switching to clocksource hpet [ 6.266669] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 6.266688] ACPI: Power Button [PWRB] [ 6.266906] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2 [ 6.268444] ACPI: Lid Switch [LID0] [ 6.268726] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 6.268742] ACPI: Power Button [PWRF] [ 6.346432] wmi: Mapper loaded [ 6.348923] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.349006] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.349135] r8169 0000:01:00.0: setting latency timer to 64 [ 6.349158] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default [ 6.349365] r8169 0000:01:00.0: irq 43 for MSI/MSI-X [ 6.351058] r8169 0000:01:00.0: eth0: RTL8101e at 0xf8306000, 68:b5:99:d3:c1:d8, XID 04000000 IRQ 43 [ 6.358493] ACPI: AC Adapter [AC] (on-line) [ 6.409574] ACPI: Battery Slot [BAT0] (battery present) [ 6.671238] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 6.763109] usbcore: registered new interface driver usbfs [ 6.763877] usbcore: registered new interface driver hub [ 6.764048] usbcore: registered new device driver usb [ 6.816754] input: HP WMI hotkeys as /devices/virtual/input/input5 [ 6.922465] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.922533] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.922580] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 6.922590] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 6.922696] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 6.922752] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 6.922773] ehci_hcd 0000:00:1d.7: debug port 1 [ 6.926672] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 6.926717] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x94204400 [ 6.940107] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 6.940215] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.940225] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.940232] usb usb1: Product: EHCI Host Controller [ 6.940239] usb usb1: Manufacturer: Linux 3.0.0-1-686-pae ehci_hcd [ 6.940246] usb usb1: SerialNumber: 0000:00:1d.7 [ 6.940663] hub 1-0:1.0: USB hub found [ 6.940681] hub 1-0:1.0: 8 ports detected [ 6.941303] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.952204] cfg80211: Calling CRDA to update world regulatory domain [ 7.022714] uhci_hcd: USB Universal Host Controller Interface driver [ 7.022821] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.022845] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 7.022855] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 7.022888] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 7.022943] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003080 [ 7.023063] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.023072] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.023080] usb usb2: Product: UHCI Host Controller [ 7.023087] usb usb2: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd [ 7.023094] usb usb2: SerialNumber: 0000:00:1d.0 [ 7.023483] hub 2-0:1.0: USB hub found [ 7.023501] hub 2-0:1.0: 2 ports detected [ 7.023757] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.023781] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 7.023791] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 7.023825] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 7.023912] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003060 [ 7.024103] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.024113] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.024121] usb usb3: Product: UHCI Host Controller [ 7.024128] usb usb3: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd [ 7.024135] usb usb3: SerialNumber: 0000:00:1d.1 [ 7.024571] hub 3-0:1.0: USB hub found [ 7.024589] hub 3-0:1.0: 2 ports detected [ 7.024817] uhci_hcd 0000:00:1d.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.024840] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 7.024852] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 7.024880] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 7.024971] uhci_hcd 0000:00:1d.2: irq 17, io base 0x00003040 [ 7.025093] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.025103] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.025112] usb usb4: Product: UHCI Host Controller [ 7.025119] usb usb4: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd [ 7.025127] usb usb4: SerialNumber: 0000:00:1d.2 [ 7.025516] hub 4-0:1.0: USB hub found [ 7.025533] hub 4-0:1.0: 2 ports detected [ 7.025766] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 7.025788] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 7.025799] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 7.025827] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 7.025916] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00003020 [ 7.026033] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 7.026043] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.026050] usb usb5: Product: UHCI Host Controller [ 7.026057] usb usb5: Manufacturer: Linux 3.0.0-1-686-pae uhci_hcd [ 7.026063] usb usb5: SerialNumber: 0000:00:1d.3 [ 7.026511] hub 5-0:1.0: USB hub found [ 7.026529] hub 5-0:1.0: 2 ports detected [ 7.226650] [drm] Initialized drm 1.1.0 20060810 [ 7.252108] usb 1-8: new high speed USB device number 2 using ehci_hcd [ 7.327252] brcmutil: module is from the staging directory, the quality is unknown, you have been warned. [ 7.397579] i915 0000:00:02.0: power state changed by ACPI to D0 [ 7.397592] i915 0000:00:02.0: power state changed by ACPI to D0 [ 7.397605] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.397613] i915 0000:00:02.0: setting latency timer to 64 [ 7.404121] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned. [ 7.418971] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 10 [ 7.419004] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.419020] brcmsmac 0000:02:00.0: setting latency timer to 64 [ 7.452264] i915 0000:00:02.0: irq 44 for MSI/MSI-X [ 7.452276] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 7.452281] [drm] Driver supports precise vblank timestamp query. [ 7.452371] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 7.454661] usb 1-8: New USB device found, idVendor=174f, idProduct=1122 [ 7.454670] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 7.454678] usb 1-8: Product: HP Webcam [ 7.454683] usb 1-8: Manufacturer: D-MAX [ 7.454689] usb 1-8: SerialNumber: 00 [ 7.616233] Linux media interface: v0.10 [ 7.627138] Linux video capture interface: v2.00 [ 7.644861] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xa40000/0xa0400 [ 7.690302] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 7.779067] [drm] initialized overlay support [ 7.796226] uvcvideo: Found UVC 1.00 device HP Webcam (174f:1122) [ 7.798361] fbcon: inteldrmfb (fb0) is primary device [ 7.810030] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input7 [ 7.810254] usbcore: registered new interface driver uvcvideo [ 7.810260] USB Video Class driver (v1.1.0) [ 7.853941] Console: switching to colour frame buffer device 128x37 [ 7.866892] fb0: inteldrmfb frame buffer device [ 7.866899] drm: registered panic notifier [ 7.875498] acpi device:21: registered as cooling_device2 [ 7.876194] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8 [ 7.876355] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no) [ 7.876487] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.998841] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 8.004512] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.004629] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 8.004695] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 8.102313] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9 [ 8.120480] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 8.120784] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 8.883961] cfg80211: World regulatory domain updated: [ 8.883969] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.883977] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.883983] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.883989] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.883996] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.884003] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.884083] cfg80211: Calling CRDA for country: US [ 8.896911] cfg80211: Regulatory domain changed to country: US [ 8.896922] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.896932] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 8.896942] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 8.896951] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.896960] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.896970] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.896979] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 8.898929] cfg80211: Calling CRDA for country: EU [ 8.910480] cfg80211: Regulatory domain changed to country: EU [ 8.910488] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.910495] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.910501] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.910507] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 8.910512] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 10.158750] Adding 3905532k swap on /dev/sda1. Priority:-1 extents:1 across:3905532k [ 10.618757] loop: module loaded [ 12.124754] fuse init (API version 7.16) [ 13.945497] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 15.409094] r8169 0000:01:00.0: eth0: link down [ 15.409481] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 15.483912] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: true (implement) [ 15.486977] ieee80211 phy0: wl_ops_config: change monitor mode: false (implement) [ 15.490118] ieee80211 phy0: wl_ops_config: change power-save mode: false (implement) [ 15.493819] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement) [ 15.497257] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.801360] ieee80211 phy0: wl_ops_bss_info_changed: BSS idle: false (implement) [ 17.861726] apm: BIOS not found. [ 19.012598] Bluetooth: Core ver 2.16 [ 19.012676] NET: Registered protocol family 31 [ 19.012682] Bluetooth: HCI device and connection manager initialized [ 19.012690] Bluetooth: HCI socket layer initialized [ 19.012695] Bluetooth: L2CAP socket layer initialized [ 19.012798] Bluetooth: SCO socket layer initialized [ 19.061474] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 19.061482] Bluetooth: BNEP filters: protocol multicast [ 19.062687] Bluetooth: RFCOMM TTY layer initialized [ 19.062703] Bluetooth: RFCOMM socket layer initialized [ 19.062709] Bluetooth: RFCOMM ver 1.11