[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#631582: nouveau: 2.6.39-2 does not use my monitor's native resolution



Package: linux-2.6
Version: 2.6.39-2
Severity: normal

With linux-image-2.6.39-2-686-pae, my kernel's console does not use my
monitor's native resolution (1600x1200) and instead uses 1280x1024.
On the other hand linux-image-2.6.32-5-686-bigmem used 1600x1200 just fine.
My hardware is recognized by the X11 nouveau driver as "NV44" (note that
I don't actually use the X11 nouveau driver, but the fbdev instead because
the X11 nouveau driver ends up deciding it can't find any display, but that's
a separate problem that appears both with 2.6.32 and 2.6.39).

I include the nouveau&drm part of the dmesg output in both the 2.6.32
and 2.6.39 cases.


	Stefan


-- Package-specific info:
** Version:
Linux version 2.6.39-2-686-pae (Debian 2.6.39-2) (ben@decadent.org.uk) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:33:14 UTC 2011

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.39-2-686-pae root=/dev/mapper/Pastel-root ro quiet

** Tainted: W (512)
 * Taint on warning.

** Kernel log:
[  507.051791] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=2)
[  507.051794] wlan0: associated
[  507.063957] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  517.888016] wlan0: no IPv6 routers present
[  572.629300] wlan0: deauthenticating from 00:18:3f:cb:5a:59 by local choice (reason=3)
[  572.666305] cfg80211: Calling CRDA to update world regulatory domain
[  572.777369] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  574.787887] forcedeth 0000:00:0a.0: eth-down: no link during initialization
[  574.788442] ADDRCONF(NETDEV_UP): eth-down: link is not ready
[  591.598512] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  591.713625] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  591.811894] forcedeth 0000:00:0a.0: eth-down: no link during initialization
[  591.812445] ADDRCONF(NETDEV_UP): eth-down: link is not ready
[  593.967189] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  596.240211] wlan0: authenticate with 00:18:3f:cb:5a:59 (try 1)
[  596.242584] wlan0: authenticated
[  596.262207] wlan0: associate with 00:18:3f:cb:5a:59 (try 1)
[  596.265716] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=2)
[  596.265719] wlan0: associated
[  596.277868] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  606.544021] wlan0: no IPv6 routers present
[  659.629639] wlan0: deauthenticating from 00:18:3f:cb:5a:59 by local choice (reason=3)
[  659.673770] cfg80211: Calling CRDA for country: US
[  659.789457] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  661.836092] forcedeth 0000:00:0a.0: eth-down: no link during initialization
[  661.836637] ADDRCONF(NETDEV_UP): eth-down: link is not ready
[  664.278700] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  664.399318] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  664.500514] forcedeth 0000:00:0a.0: eth-down: no link during initialization
[  664.501025] ADDRCONF(NETDEV_UP): eth-down: link is not ready
[  666.633029] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  668.912543] wlan0: authenticate with 00:18:3f:cb:5a:59 (try 1)
[  668.914792] wlan0: authenticated
[  668.934288] wlan0: associate with 00:18:3f:cb:5a:59 (try 1)
[  668.936671] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=2)
[  668.936673] wlan0: associated
[  668.948822] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  679.520016] wlan0: no IPv6 routers present
[  734.629790] wlan0: deauthenticating from 00:18:3f:cb:5a:59 by local choice (reason=3)
[  734.673795] cfg80211: Calling CRDA to update world regulatory domain
[  734.797609] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  736.915941] forcedeth 0000:00:0a.0: eth-down: no link during initialization
[  736.916491] ADDRCONF(NETDEV_UP): eth-down: link is not ready
[  765.490434] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  765.610297] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  765.711946] forcedeth 0000:00:0a.0: eth-down: no link during initialization
[  765.712497] ADDRCONF(NETDEV_UP): eth-down: link is not ready
[  767.867622] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  770.140523] wlan0: authenticate with 00:18:3f:cb:5a:59 (try 1)
[  770.142021] wlan0: authenticated
[  770.161643] wlan0: associate with 00:18:3f:cb:5a:59 (try 1)
[  770.164276] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=2)
[  770.164279] wlan0: associated
[  770.176555] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  780.976017] wlan0: no IPv6 routers present
[  838.851163] wlan0: deauthenticating from 00:18:3f:cb:5a:59 by local choice (reason=3)
[  838.894417] cfg80211: Calling CRDA for country: US
[  839.001334] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  844.402527] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  844.525896] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  844.616196] forcedeth 0000:00:0a.0: eth-down: no link during initialization
[  844.616707] ADDRCONF(NETDEV_UP): eth-down: link is not ready
[  846.751595] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  849.028493] wlan0: authenticate with 00:18:3f:cb:5a:59 (try 1)
[  849.030744] wlan0: authenticated
[  849.050240] wlan0: associate with 00:18:3f:cb:5a:59 (try 1)
[  849.052124] wlan0: RX AssocResp from 00:18:3f:cb:5a:59 (capab=0x431 status=0 aid=2)
[  849.052127] wlan0: associated
[  849.064275] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  859.824015] wlan0: no IPv6 routers present
[  871.328041] tun: Universal TUN/TAP device driver, 1.6
[  871.328045] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1004.002140] ------------[ cut here ]------------
[ 1004.002150] WARNING: at /build/buildd-linux-2.6_2.6.39-2-i386-Ow09ch/linux-2.6-2.6.39/debian/build/source_i386_none/block/genhd.c:1556 disk_clear_events+0xa9/0xd2()
[ 1004.002153] Hardware name: System Product Name
[ 1004.002155] Modules linked in: tun arc4 ecb rt73usb rt2x00usb rt2x00lib mac80211 cfg80211 mperf cpufreq_stats cpufreq_conservative cpufreq_userspace cpufreq_powersave ppdev lp rfcomm bnep bluetooth rfkill crc16 autofs4 binfmt_misc ppp_async crc_ccitt ppp_generic slhc fuse snd_wavefront snd_cs4236 snd_wss_lib snd_opl3_lib snd_intel8x0 snd_hwdep snd_ac97_codec snd_mpu401 snd_mpu401_uart ac97_bus snd_seq_midi snd_pcm snd_seq_midi_event snd_rawmidi nouveau snd_seq snd_timer snd_seq_device ttm drm_kms_helper drm snd evdev parport_pc k8temp asus_atk0110 i2c_algo_bit serio_raw power_supply ns558 i2c_nforce2 video parport button snd_page_alloc soundcore gameport pcspkr processor i2c_core ext3 jbd mbcache dm_mod usbhid hid sg sr_mod usb_storage cdrom sd_mod crc_t10dif uas ata_generic ohci_hcd pata_amd sata_nv thermal libata ehci_hcd fan firewire_ohci scsi_mod usbcore floppy skge thermal_sys forcedeth firewire_core crc_itu_t [last unloaded: scsi_wait_scan]
[ 1004.002221] Pid: 3578, comm: udisks-daemon Not tainted 2.6.39-2-686-pae #1
[ 1004.002223] Call Trace:
[ 1004.002229]  [<c1036b4d>] ? warn_slowpath_common+0x6a/0x7b
[ 1004.002233]  [<c114ae17>] ? disk_clear_events+0xa9/0xd2
[ 1004.002236]  [<c1036b6b>] ? warn_slowpath_null+0xd/0x10
[ 1004.002239]  [<c114ae17>] ? disk_clear_events+0xa9/0xd2
[ 1004.002248]  [<c10ecccd>] ? check_disk_change+0x17/0x45
[ 1004.002261]  [<f829b421>] ? sd_open+0xc8/0x164 [sd_mod]
[ 1004.002264]  [<c10ed7da>] ? __blkdev_get+0xb5/0x2f3
[ 1004.002267]  [<c10edba4>] ? blkdev_get+0x18c/0x270
[ 1004.002271]  [<c11204b1>] ? fsnotify_perm+0x4f/0x5a
[ 1004.002274]  [<c10ed174>] ? bd_acquire+0x20/0x8f
[ 1004.002278]  [<c10cb191>] ? __dentry_open+0x15b/0x236
[ 1004.002281]  [<c10cb2ef>] ? nameidata_to_filp+0x3a/0x45
[ 1004.002284]  [<c10edc88>] ? blkdev_get+0x270/0x270
[ 1004.002287]  [<c10d5119>] ? do_last+0x441/0x51c
[ 1004.002290]  [<c10d5681>] ? path_openat+0x97/0x27d
[ 1004.002293]  [<c10d590b>] ? do_filp_open+0x21/0x5d
[ 1004.002297]  [<c10caefc>] ? do_sys_open+0x58/0xd1
[ 1004.002299]  [<c10cafb9>] ? sys_open+0x1e/0x23
[ 1004.002304]  [<c12b715f>] ? sysenter_do_call+0x12/0x28
[ 1004.002307] ---[ end trace df70caca70b2518c ]---
[ 1459.410849] padlock_sha: VIA PadLock Hash Engine not detected.
[ 1459.424470] PPP MPPE Compression module registered

** Model information
not available

** Loaded modules:
Module                  Size  Used by
sha1_generic           12511  4 
ppp_mppe               12789  2 
tun                    17663  2 
arc4                   12418  4 
ecb                    12649  4 
rt73usb                21878  0 
rt2x00usb              13249  1 rt73usb
rt2x00lib              28634  2 rt73usb,rt2x00usb
mac80211              164606  2 rt2x00usb,rt2x00lib
cfg80211              107076  2 rt2x00lib,mac80211
mperf                  12387  0 
cpufreq_stats          12670  0 
cpufreq_conservative    12987  0 
cpufreq_userspace      12520  0 
cpufreq_powersave      12422  0 
ppdev                  12621  0 
lp                     12858  0 
rfcomm                 31961  0 
bnep                   17147  2 
bluetooth              92361  10 rfcomm,bnep
rfkill                 18510  3 cfg80211,bluetooth
crc16                  12327  1 bluetooth
autofs4                22520  1 
binfmt_misc            12778  1 
ppp_async              12845  1 
crc_ccitt              12331  1 ppp_async
ppp_generic            21823  6 ppp_mppe,ppp_async
slhc                   12498  1 ppp_generic
fuse                   55666  1 
snd_wavefront          30608  0 
snd_cs4236             26314  0 
snd_wss_lib            22401  2 snd_wavefront,snd_cs4236
snd_opl3_lib           13141  2 snd_wavefront,snd_cs4236
snd_intel8x0           22287  0 
snd_hwdep              12906  2 snd_wavefront,snd_opl3_lib
snd_ac97_codec         83732  1 snd_intel8x0
snd_mpu401             12592  0 
snd_mpu401_uart        13299  3 snd_wavefront,snd_cs4236,snd_mpu401
ac97_bus               12462  1 snd_ac97_codec
snd_seq_midi           12744  0 
snd_pcm                52731  4 snd_cs4236,snd_wss_lib,snd_intel8x0,snd_ac97_codec
snd_seq_midi_event     13124  1 snd_seq_midi
snd_rawmidi            22407  3 snd_wavefront,snd_mpu401_uart,snd_seq_midi
nouveau               466427  3 
snd_seq                39172  2 snd_seq_midi,snd_seq_midi_event
snd_timer              22171  4 snd_wss_lib,snd_opl3_lib,snd_pcm,snd_seq
snd_seq_device         12995  4 snd_opl3_lib,snd_seq_midi,snd_rawmidi,snd_seq
ttm                    46736  1 nouveau
drm_kms_helper         26550  1 nouveau
drm                   129190  3 nouveau,ttm,drm_kms_helper
snd                    38189  14 snd_wavefront,snd_cs4236,snd_wss_lib,snd_opl3_lib,snd_intel8x0,snd_hwdep,snd_ac97_codec,snd_mpu401,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
evdev                  13084  15 
parport_pc             21895  1 
k8temp                 12475  0 
asus_atk0110           17092  0 
i2c_algo_bit           12706  1 nouveau
serio_raw              12758  0 
power_supply           13283  1 nouveau
ns558                  12417  0 
i2c_nforce2            12520  0 
video                  17345  1 nouveau
parport                27018  3 ppdev,lp,parport_pc
button                 12783  1 nouveau
snd_page_alloc         12841  3 snd_wss_lib,snd_intel8x0,snd_pcm
soundcore              12878  1 snd
gameport               13332  2 ns558
pcspkr                 12515  0 
processor              26983  0 
i2c_core               19022  5 nouveau,drm_kms_helper,drm,i2c_algo_bit,i2c_nforce2
ext3                  102125  5 
jbd                    40818  1 ext3
mbcache                12810  1 ext3
dm_mod                 56401  26 
usbhid                 35206  0 
hid                    59841  1 usbhid
sg                     21385  0 
sr_mod                 17418  0 
usb_storage            34951  0 
cdrom                  34631  1 sr_mod
sd_mod                 35060  5 
crc_t10dif             12332  1 sd_mod
uas                    12975  0 
ata_generic            12439  0 
ohci_hcd               21898  0 
pata_amd               13076  0 
sata_nv                22047  3 
thermal                13058  0 
libata                132100  3 ata_generic,pata_amd,sata_nv
ehci_hcd               34885  0 
fan                    12594  0 
firewire_ohci          26332  0 
scsi_mod              134453  6 sg,sr_mod,sd_mod,usb_storage,uas,libata
usbcore                99225  8 rt73usb,rt2x00usb,usbhid,usb_storage,uas,ohci_hcd,ehci_hcd
floppy                 47893  0 
skge                   39547  0 
thermal_sys            17667  4 video,processor,thermal,fan
forcedeth              47955  0 
firewire_core          42365  1 firewire_ohci
crc_itu_t              12331  2 rt73usb,firewire_core

** PCI devices:
00:00.0 Memory controller [0580]: nVidia Corporation CK804 Memory Controller [10de:005e] (rev a3)
	Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 ISA bridge [0601]: nVidia Corporation CK804 ISA Bridge [10de:0050] (rev a3)
	Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:01.1 SMBus [0c05]: nVidia Corporation CK804 SMBus [10de:0052] (rev a2)
	Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 255
	Region 0: I/O ports at e400 [size=32]
	Region 4: I/O ports at 4c00 [size=64]
	Region 5: I/O ports at 4c40 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: nForce2_smbus

00:02.0 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at d5004000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:02.1 USB Controller [0c03]: nVidia Corporation CK804 USB Controller [10de:005b] (rev a3) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at d5005000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:04.0 Multimedia audio controller [0401]: nVidia Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2)
	Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:812a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (500ns min, 1250ns max)
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at dc00 [size=256]
	Region 1: I/O ports at e000 [size=256]
	Region 2: Memory at d5003000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: Intel ICH

00:06.0 IDE interface [0101]: nVidia Corporation CK804 IDE [10de:0053] (rev f2) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at f000 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_amd

00:07.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at 09f0 [size=8]
	Region 1: I/O ports at 0bf0 [size=4]
	Region 2: I/O ports at 0970 [size=8]
	Region 3: I/O ports at 0b70 [size=4]
	Region 4: I/O ports at d800 [size=16]
	Region 5: Memory at d5002000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv

00:08.0 IDE interface [0101]: nVidia Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO])
	Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (750ns min, 250ns max)
	Interrupt: pin A routed to IRQ 20
	Region 0: I/O ports at 09e0 [size=8]
	Region 1: I/O ports at 0be0 [size=4]
	Region 2: I/O ports at 0960 [size=8]
	Region 3: I/O ports at 0b60 [size=4]
	Region 4: I/O ports at c400 [size=16]
	Region 5: Memory at d5001000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: sata_nv

00:09.0 PCI bridge [0604]: nVidia Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=128
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: d3000000-d4ffffff
	Prefetchable memory behind bridge: d5100000-d51fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-

00:0a.0 Bridge [0680]: nVidia Corporation CK804 Ethernet Controller [10de:0057] (rev a3)
	Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:8141]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b000 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: forcedeth

00:0b.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0c.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0d.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:0e.0 PCI bridge [0604]: nVidia Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	Memory behind bridge: d0000000-d2ffffff
	Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel driver in use: k8temp

01:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 TurboCache(TM)] [10de:0161] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:81ba]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at d1000000 (64-bit, non-prefetchable) [size=16M]
	[virtual] Expansion ROM at d2000000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau

05:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard [1043:808b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d4008000 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at d4004000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci

05:0c.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
	Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16K]
	Region 1: I/O ports at a000 [size=256]
	[virtual] Expansion ROM at d5100000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: skge


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 05e3:0710 Genesys Logic, Inc. USB 2.0 33-in-1 Card Reader
Bus 002 Device 002: ID 04b3:3016 IBM Corp. UltraNav Keyboard Hub
Bus 002 Device 003: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse (M-BT58)
Bus 002 Device 004: ID 04b3:3019 IBM Corp. 
Bus 002 Device 005: ID 06cb:0009 Synaptics, Inc. Composite TouchPad and TrackPoint
Bus 001 Device 005: ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2573]


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.39-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=fr_CH.UTF-8, LC_CTYPE=fr_CH.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.39-2-686-pae depends on:
ii  debconf [debconf-2.0]         1.5.39     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.16-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-2-686-pae recommends:
ii  firmware-linux-free           3          Binary firmware for various driver
ii  libc6-i686                    2.13-7     Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.39-2-686-pae suggests:
ii  grub-pc                       1.99-6     GRand Unified Bootloader, version 
pn  linux-doc-2.6.39              <none>     (no description available)

Versions of packages linux-image-2.6.39-2-686-pae is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
ii  firmware-iwlwifi              0.30       Binary firmware for Intel Wireless
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
ii  firmware-ralink               0.30       Binary firmware for Ralink wireles
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.39-2-686-pae/postinst/depmod-error-initrd-2.6.39-2-686-pae: false
* linux-image-2.6.39-2-686-pae/postinst/missing-firmware-2.6.39-2-686-pae:
  linux-image-2.6.39-2-686-pae/prerm/removing-running-kernel-2.6.39-2-686-pae: true
  linux-image-2.6.39-2-686-pae/postinst/ignoring-ramdisk:
[    9.358491] [drm] Initialized drm 1.1.0 20060810
[    9.483882] nouveau 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[    9.483888] nouveau 0000:01:00.0: setting latency timer to 64
[    9.485305] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x044100a2)
[    9.487006] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[    9.565555] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    9.565559] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    9.565562] [drm] nouveau 0000:01:00.0: Bios version 05.44.02.11
[    9.565566] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[    9.565568] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[    9.565571] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[    9.565575] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01010310 00000028
[    9.565578] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000000
[    9.565581] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 020203f1 0000c020
[    9.565584] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 6 2
[    9.565592] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEBC4
[    9.565755] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEE99
[    9.578873] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF2D1
[    9.578895] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF42E
[    9.580020] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF4DC
[    9.598928] [drm] nouveau 0000:01:00.0: mem timing table length unknown: 14
[    9.598964] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[    9.598967] [drm] nouveau 0000:01:00.0: 0: memory 0MHz
[    9.598976] [drm] nouveau 0000:01:00.0: c: memory 399MHz core 199MHz
[    9.599080] [TTM] Zone  kernel: Available graphics memory: 432048 kiB.
[    9.599082] [TTM] Zone highmem: Available graphics memory: 2073492 kiB.
[    9.599084] [TTM] Initializing pool allocator.
[    9.599105] [drm] nouveau 0000:01:00.0: Detected 16MiB VRAM
[    9.604967] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[    9.605045] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[    9.661965] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.661967] [drm] No driver support for vblank timestamp query.
[    9.662426] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[    9.662430] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[    9.662433] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
[    9.856666] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo f714c000
[    9.856755] fbcon: nouveaufb (fb0) is primary device
[    9.870631] [drm] nouveau 0000:01:00.0: 0xD149: Parsing digital output script table
[    9.920260] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[    9.920263] [drm] nouveau 0000:01:00.0: Output DVI-D-1 is running on CRTC 0 using output A
[    9.924292] Console: switching to colour frame buffer device 160x64
[    9.929141] fb0: nouveaufb frame buffer device
[    9.929142] drm: registered panic notifier
[    9.929149] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[    6.222571] [drm] Initialized drm 1.1.0 20060810
[    6.558162] nouveau 0000:01:00.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
[    6.558167] nouveau 0000:01:00.0: setting latency timer to 64
[    6.561069] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x044100a2)
[    6.561602] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[    6.764616] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    6.764619] [drm] nouveau 0000:01:00.0: BIT BIOS found
[    6.764622] [drm] nouveau 0000:01:00.0: Bios version 05.44.02.11
[    6.764626] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[    6.764629] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[    6.764632] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 6 2
[    6.764635] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01010310 00000028
[    6.764638] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00000000
[    6.764641] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 020203f1 0000c020
[    6.764648] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xEBC4
[    6.764809] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xEE99
[    6.824227] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xF2D1
[    6.824255] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF42E
[    6.832139] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF4DC
[    6.842099] [TTM] Zone  kernel: Available graphics memory: 431048 kiB.
[    6.842103] [TTM] Zone highmem: Available graphics memory: 2073516 kiB.
[    6.842116] [drm] nouveau 0000:01:00.0: 16 MiB VRAM
[    6.843506] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[    6.844031] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[    6.844508] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[    6.844514] [drm] nouveau 0000:01:00.0: Initial CRTC_OWNER is 0
[    6.844521] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[    6.904053] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[    6.904111] [drm] nouveau 0000:01:00.0: Detected a DVI-D connector
[    6.904135] [drm] nouveau 0000:01:00.0: Detected a TV connector
[    6.905838] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[    6.905842] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[    6.905845] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 2)
[    7.091607] [drm] nouveau 0000:01:00.0: allocated 1600x1200 fb: 0x49000, bo f70c8e00
[    7.102983] [drm] nouveau 0000:01:00.0: Output DVI-D-1 is running on CRTC 0 using output A
[    7.102987] [drm] nouveau 0000:01:00.0: 0xD149: Parsing digital output script table
[    7.157026] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[    7.157031] [drm] nouveau 0000:01:00.0: Output DVI-D-1 is running on CRTC 0 using output A
[    7.163921] Console: switching to colour frame buffer device 200x75
[    7.172091] fb0: nouveaufb frame buffer device
[    7.172093] registered panic notifier
[    7.172101] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0

Reply to: