[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#628832: linux-image-2.6.39-1-686-pae: Blank DVI output after resume when using KMS on RV250



Le vendredi 03 juin 2011 à 05:09 +0100, Ben Hutchings a écrit :
> Please test with 'echo mem > /sys/power/state' first.

Tested, same result: blank DVI output. Attached dmesg output.

Arnaud.
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.39-1-686-pae (Debian 2.6.39-1) (maks@debian.org) (gcc version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Fri May 20 20:40:05 UTC 2011
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
[    0.000000]  BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] DMI 2.2 present.
[    0.000000] DMI: ASUSTeK Computer INC. A7N8X-E/A7N8X-E, BIOS ASUS A7N8X-E Deluxe ACPI BIOS Rev 1012  08/04/2004
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x5fff0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-AFFFF uncachable
[    0.000000]   B0000-BFFFF write-combining
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FE0000000 write-back
[    0.000000]   2 base 0C0000000 mask FF8000000 write-combining
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[    0.000000] RAMDISK: 36ab6000 - 37553000
[    0.000000] ACPI: RSDP 000f75e0 00014 (v00 Nvidia)
[    0.000000] ACPI: RSDT 5fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 5fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 5fff30c0 04561 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
[    0.000000] ACPI: FACS 5fff0000 00040
[    0.000000] ACPI: APIC 5fff7640 0006E (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 645MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0005fff0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0005fff0
[    0.000000] On node 0 totalpages: 393087
[    0.000000] free_area_init_node: node 0, pgdat c14167c0, node_mem_map f5eb6200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1292 pages used for memmap
[    0.000000]   HighMem zone: 164070 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f7600000 s30976 r0 d22272 u2097152
[    0.000000] pcpu-alloc: s30976 r0 d22272 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 390015
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.39-1-686-pae root=/dev/sda8 ro
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 6290944 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000379fe:0005fff0)
[    0.000000] Memory: 1536864k/1572800k available (2784k kernel code, 35484k reserved, 1428k data, 436k init, 661448k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc141e000 - 0xc148b000   ( 436 kB)
[    0.000000]       .data : 0xc12b8100 - 0xc141d240   (1428 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12b8100   (2784 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:1280
[    0.000000] CPU 0 irqstacks, hard=f540a000 soft=f540c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1746.865 MHz processor.
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3493.73 BogoMIPS (lpj=6987460)
[    0.008099] pid_max: default: 32768 minimum: 301
[    0.008216] Security Framework initialized
[    0.008267] SELinux:  Disabled at boot.
[    0.008342] Mount-cache hash table entries: 512
[    0.008789] Initializing cgroup subsys ns
[    0.008839] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.008899] Initializing cgroup subsys cpuacct
[    0.008974] Initializing cgroup subsys memory
[    0.009037] Initializing cgroup subsys devices
[    0.009084] Initializing cgroup subsys freezer
[    0.009130] Initializing cgroup subsys net_cls
[    0.009176] Initializing cgroup subsys blkio
[    0.009267] mce: CPU supports 4 MCE banks
[    0.009738] SMP alternatives: switching to UP code
[    0.016091] Freeing SMP alternatives: 16k freed
[    0.016155] ACPI: Core revision 20110316
[    0.019891] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020338] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.060076] CPU0: AMD Sempron(tm)   2500+ stepping 01
[    0.064003] Performance Events: AMD PMU driver.
[    0.064003] ... version:                0
[    0.064003] ... bit width:              48
[    0.064003] ... generic registers:      4
[    0.064003] ... value mask:             0000ffffffffffff
[    0.064003] ... max period:             00007fffffffffff
[    0.064003] ... fixed-purpose events:   0
[    0.064003] ... event mask:             000000000000000f
[    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.064003] Brought up 1 CPUs
[    0.064003] Total of 1 processors activated (3493.73 BogoMIPS).
[    0.064003] devtmpfs: initialized
[    0.064003] PM: Registering ACPI NVS region at 5fff0000 (12288 bytes)
[    0.064003] print_constraints: dummy: 
[    0.064003] NET: Registered protocol family 16
[    0.064003] ACPI: bus type pci registered
[    0.094775] PCI: PCI BIOS revision 2.10 entry at 0xfb410, last bus=3
[    0.094824] PCI: Using configuration type 1 for base access
[    0.095635] bio: create slab <bio-0> at 0
[    0.096798] ACPI: EC: Look up EC in DSDT
[    0.100748] ACPI: Interpreter enabled
[    0.100802] ACPI: (supports S0 S1 S3 S4 S5)
[    0.101029] ACPI: Using IOAPIC for interrupt routing
[    0.107718] ACPI: No dock devices found.
[    0.107770] HEST: Table not found.
[    0.107819] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.107962] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.108169] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.108174] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.108179] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.108183] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[    0.108187] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[    0.108208] pci 0000:00:00.0: [10de:01e0] type 0 class 0x000600
[    0.108218] pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xc7ffffff pref]
[    0.108237] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[    0.108313] pci 0000:00:00.1: [10de:01eb] type 0 class 0x000500
[    0.108352] pci 0000:00:00.2: [10de:01ee] type 0 class 0x000500
[    0.108391] pci 0000:00:00.3: [10de:01ed] type 0 class 0x000500
[    0.108428] pci 0000:00:00.4: [10de:01ec] type 0 class 0x000500
[    0.108467] pci 0000:00:00.5: [10de:01ef] type 0 class 0x000500
[    0.108511] pci 0000:00:01.0: [10de:0060] type 0 class 0x000601
[    0.108591] pci 0000:00:01.1: [10de:0064] type 0 class 0x000c05
[    0.108606] pci 0000:00:01.1: reg 10: [io  0xdc00-0xdc1f]
[    0.108659] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.108665] pci 0000:00:01.1: PME# disabled
[    0.108689] pci 0000:00:02.0: [10de:0067] type 0 class 0x000c03
[    0.108704] pci 0000:00:02.0: reg 10: [mem 0xde086000-0xde086fff]
[    0.108756] pci 0000:00:02.0: supports D1 D2
[    0.108759] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.108764] pci 0000:00:02.0: PME# disabled
[    0.108784] pci 0000:00:02.1: [10de:0067] type 0 class 0x000c03
[    0.108799] pci 0000:00:02.1: reg 10: [mem 0xde081000-0xde081fff]
[    0.108850] pci 0000:00:02.1: supports D1 D2
[    0.108854] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.108859] pci 0000:00:02.1: PME# disabled
[    0.108880] pci 0000:00:02.2: [10de:0068] type 0 class 0x000c03
[    0.108897] pci 0000:00:02.2: reg 10: [mem 0xde082000-0xde0820ff]
[    0.108954] pci 0000:00:02.2: supports D1 D2
[    0.108958] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.108963] pci 0000:00:02.2: PME# disabled
[    0.108990] pci 0000:00:04.0: [10de:0066] type 0 class 0x000200
[    0.109005] pci 0000:00:04.0: reg 10: [mem 0xde083000-0xde083fff]
[    0.109015] pci 0000:00:04.0: reg 14: [io  0xe000-0xe007]
[    0.109061] pci 0000:00:04.0: supports D1 D2
[    0.109064] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.109069] pci 0000:00:04.0: PME# disabled
[    0.109088] pci 0000:00:05.0: [10de:006b] type 0 class 0x000401
[    0.109103] pci 0000:00:05.0: reg 10: [mem 0xde000000-0xde07ffff]
[    0.109154] pci 0000:00:05.0: supports D1 D2
[    0.109174] pci 0000:00:06.0: [10de:006a] type 0 class 0x000401
[    0.109189] pci 0000:00:06.0: reg 10: [io  0xe400-0xe4ff]
[    0.109198] pci 0000:00:06.0: reg 14: [io  0xd000-0xd07f]
[    0.109208] pci 0000:00:06.0: reg 18: [mem 0xde087000-0xde087fff]
[    0.109248] pci 0000:00:06.0: supports D1 D2
[    0.109265] pci 0000:00:08.0: [10de:006c] type 1 class 0x000604
[    0.109306] pci 0000:00:09.0: [10de:0065] type 0 class 0x000101
[    0.109345] pci 0000:00:09.0: reg 20: [io  0xf000-0xf00f]
[    0.109392] pci 0000:00:0d.0: [10de:006e] type 0 class 0x000c00
[    0.109407] pci 0000:00:0d.0: reg 10: [mem 0xde084000-0xde0847ff]
[    0.109417] pci 0000:00:0d.0: reg 14: [mem 0xde085000-0xde08503f]
[    0.109462] pci 0000:00:0d.0: supports D1 D2
[    0.109466] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.109470] pci 0000:00:0d.0: PME# disabled
[    0.109502] pci 0000:00:1e.0: [10de:01e8] type 1 class 0x000604
[    0.109561] pci 0000:01:04.0: [11ab:4320] type 0 class 0x000200
[    0.109584] pci 0000:01:04.0: reg 10: [mem 0xdd000000-0xdd003fff]
[    0.109597] pci 0000:01:04.0: reg 14: [io  0x9000-0x90ff]
[    0.109645] pci 0000:01:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.109671] pci 0000:01:04.0: supports D1 D2
[    0.109674] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.109681] pci 0000:01:04.0: PME# disabled
[    0.109711] pci 0000:01:07.0: [109e:036e] type 0 class 0x000400
[    0.109734] pci 0000:01:07.0: reg 10: [mem 0xd8000000-0xd8000fff pref]
[    0.109835] pci 0000:01:07.1: [109e:0878] type 0 class 0x000480
[    0.109858] pci 0000:01:07.1: reg 10: [mem 0xd8001000-0xd8001fff pref]
[    0.109966] pci 0000:01:08.0: [10ec:8139] type 0 class 0x000200
[    0.109986] pci 0000:01:08.0: reg 10: [io  0x9400-0x94ff]
[    0.109999] pci 0000:01:08.0: reg 14: [mem 0xdd004000-0xdd0040ff]
[    0.110064] pci 0000:01:08.0: supports D1 D2
[    0.110068] pci 0000:01:08.0: PME# supported from D1 D2 D3hot D3cold
[    0.110074] pci 0000:01:08.0: PME# disabled
[    0.110099] pci 0000:01:0a.0: [13f6:0111] type 0 class 0x000401
[    0.110119] pci 0000:01:0a.0: reg 10: [io  0x9800-0x98ff]
[    0.110196] pci 0000:01:0a.0: supports D1 D2
[    0.110220] pci 0000:01:0b.0: [1095:3112] type 0 class 0x000104
[    0.110240] pci 0000:01:0b.0: reg 10: [io  0x9c00-0x9c07]
[    0.110253] pci 0000:01:0b.0: reg 14: [io  0xa000-0xa003]
[    0.110266] pci 0000:01:0b.0: reg 18: [io  0xa400-0xa407]
[    0.110279] pci 0000:01:0b.0: reg 1c: [io  0xa800-0xa803]
[    0.110291] pci 0000:01:0b.0: reg 20: [io  0xac00-0xac0f]
[    0.110304] pci 0000:01:0b.0: reg 24: [mem 0xdd005000-0xdd0051ff]
[    0.110317] pci 0000:01:0b.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[    0.110338] pci 0000:01:0b.0: supports D1 D2
[    0.110374] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[    0.110424] pci 0000:00:08.0:   bridge window [io  0x9000-0xafff]
[    0.110429] pci 0000:00:08.0:   bridge window [mem 0xdc000000-0xddffffff]
[    0.110435] pci 0000:00:08.0:   bridge window [mem 0xd8000000-0xd8ffffff pref]
[    0.110462] pci 0000:03:00.0: [1002:5960] type 0 class 0x000300
[    0.110480] pci 0000:03:00.0: reg 10: [mem 0xc8000000-0xcfffffff pref]
[    0.110490] pci 0000:03:00.0: reg 14: [io  0xc000-0xc0ff]
[    0.110500] pci 0000:03:00.0: reg 18: [mem 0xdb000000-0xdb00ffff]
[    0.110528] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.110550] pci 0000:03:00.0: supports D1 D2
[    0.110572] pci 0000:03:00.1: [1002:5940] type 0 class 0x000380
[    0.110587] pci 0000:03:00.1: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[    0.110597] pci 0000:03:00.1: reg 14: [mem 0xdb010000-0xdb01ffff]
[    0.110644] pci 0000:03:00.1: supports D1 D2
[    0.110686] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.110735] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.110740] pci 0000:00:1e.0:   bridge window [mem 0xda000000-0xdbffffff]
[    0.110745] pci 0000:00:1e.0:   bridge window [mem 0xc8000000-0xd7ffffff pref]
[    0.110756] pci_bus 0000:00: on NUMA node 0
[    0.110762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.110874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.111115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[    0.143235] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.143763] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.144277] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.144800] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.145323] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.145909] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.146430] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.146950] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.147470] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.148026] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.148553] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.149140] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.149664] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.150185] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.150705] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.151289] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.151879] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[    0.152068] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[    0.152262] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[    0.152454] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[    0.152646] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.152907] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[    0.153227] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[    0.153544] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[    0.153862] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0
[    0.154183] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[    0.154501] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[    0.154822] ACPI: PCI Interrupt Link [APCS] (IRQs *23)
[    0.155046] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[    0.155364] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0
[    0.155683] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[    0.156059] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[    0.156527] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.156587] vgaarb: loaded
[    0.160072] PCI: Using ACPI for IRQ routing
[    0.160146] PCI: pci_cache_line_size set to 32 bytes
[    0.160254] reserve RAM buffer: 000000000009f800 - 000000000009ffff 
[    0.160259] reserve RAM buffer: 000000005fff0000 - 000000005fffffff 
[    0.162331] pnp: PnP ACPI init
[    0.162408] ACPI: bus type pnp registered
[    0.162768] pnp 00:00: [io  0x4000-0x407f]
[    0.162773] pnp 00:00: [io  0x4080-0x40ff]
[    0.162777] pnp 00:00: [io  0x4400-0x447f]
[    0.162780] pnp 00:00: [io  0x4480-0x44ff]
[    0.162783] pnp 00:00: [io  0x4200-0x427f]
[    0.162786] pnp 00:00: [io  0x4280-0x42ff]
[    0.162894] system 00:00: [io  0x4000-0x407f] has been reserved
[    0.162944] system 00:00: [io  0x4080-0x40ff] has been reserved
[    0.162993] system 00:00: [io  0x4400-0x447f] has been reserved
[    0.163041] system 00:00: [io  0x4480-0x44ff] has been reserved
[    0.163090] system 00:00: [io  0x4200-0x427f] has been reserved
[    0.163138] system 00:00: [io  0x4280-0x42ff] has been reserved
[    0.163188] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.163205] pnp 00:01: [io  0x5000-0x503f]
[    0.163209] pnp 00:01: [io  0x5500-0x553f]
[    0.163268] system 00:01: [io  0x5000-0x503f] has been reserved
[    0.163318] system 00:01: [io  0x5500-0x553f] has been reserved
[    0.163367] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.163540] pnp 00:02: [mem 0x000d8800-0x000dbfff]
[    0.163545] pnp 00:02: [mem 0x000f0000-0x000f7fff]
[    0.163549] pnp 00:02: [mem 0x000f8000-0x000fbfff]
[    0.163552] pnp 00:02: [mem 0x000fc000-0x000fffff]
[    0.163556] pnp 00:02: [mem 0x5fff0000-0x5fffffff]
[    0.163559] pnp 00:02: [mem 0xffff0000-0xffffffff]
[    0.163563] pnp 00:02: [mem 0x00000000-0x0009ffff]
[    0.163566] pnp 00:02: [mem 0x00100000-0x5ffeffff]
[    0.163570] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.163573] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.163647] system 00:02: [mem 0x000d8800-0x000dbfff] has been reserved
[    0.163701] system 00:02: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.163751] system 00:02: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.163801] system 00:02: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.163851] system 00:02: [mem 0x5fff0000-0x5fffffff] could not be reserved
[    0.163901] system 00:02: [mem 0xffff0000-0xffffffff] has been reserved
[    0.163950] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.164000] system 00:02: [mem 0x00100000-0x5ffeffff] could not be reserved
[    0.164030] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.164080] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.164130] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.164204] pnp 00:03: [bus 00-ff]
[    0.164208] pnp 00:03: [io  0x0cf8-0x0cff]
[    0.164212] pnp 00:03: [io  0x0000-0x0cf7 window]
[    0.164216] pnp 00:03: [io  0x0d00-0xffff window]
[    0.164220] pnp 00:03: [mem 0x000a0000-0x000bffff window]
[    0.164224] pnp 00:03: [mem 0x000c0000-0x000dffff window]
[    0.164227] pnp 00:03: [mem 0x60000000-0xfebfffff window]
[    0.164324] pnp 00:03: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.164850] pnp 00:04: [io  0x0010-0x001f]
[    0.164854] pnp 00:04: [io  0x0022-0x003f]
[    0.164858] pnp 00:04: [io  0x0044-0x005f]
[    0.164861] pnp 00:04: [io  0x0062-0x0063]
[    0.164864] pnp 00:04: [io  0x0065-0x006f]
[    0.164867] pnp 00:04: [io  0x0074-0x007f]
[    0.164870] pnp 00:04: [io  0x0091-0x0093]
[    0.164874] pnp 00:04: [io  0x00a2-0x00bf]
[    0.164877] pnp 00:04: [io  0x00e0-0x00ef]
[    0.164880] pnp 00:04: [io  0x04d0-0x04d1]
[    0.164974] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.165025] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165044] pnp 00:05: [dma 4]
[    0.165048] pnp 00:05: [io  0x0000-0x000f]
[    0.165051] pnp 00:05: [io  0x0080-0x0090]
[    0.165055] pnp 00:05: [io  0x0094-0x009f]
[    0.165058] pnp 00:05: [io  0x00c0-0x00df]
[    0.165108] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.165125] pnp 00:06: [io  0x0070-0x0073]
[    0.165142] pnp 00:06: [irq 8]
[    0.165192] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.165206] pnp 00:07: [io  0x0061]
[    0.165264] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.165280] pnp 00:08: [io  0x00f0-0x00ff]
[    0.165287] pnp 00:08: [irq 13]
[    0.165337] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.165623] pnp 00:09: [io  0x03f8-0x03ff]
[    0.165631] pnp 00:09: [irq 4]
[    0.165730] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.165955] pnp 00:0a: [io  0x02f8-0x02ff]
[    0.165963] pnp 00:0a: [irq 3]
[    0.166052] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.166478] pnp 00:0b: [io  0x0378-0x037f]
[    0.166482] pnp 00:0b: [io  0x0778-0x077b]
[    0.166490] pnp 00:0b: [irq 7]
[    0.166493] pnp 00:0b: [dma 3]
[    0.166591] pnp 00:0b: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.166644] pnp 00:0c: [io  0x0060]
[    0.166648] pnp 00:0c: [io  0x0064]
[    0.166655] pnp 00:0c: [irq 1]
[    0.166710] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.166914] pnp 00:0d: [io  0x0330-0x0331]
[    0.166922] pnp 00:0d: [irq 10]
[    0.166994] pnp 00:0d: Plug and Play ACPI device, IDs PNPb006 (active)
[    0.167178] pnp 00:0e: [io  0x0201]
[    0.167245] pnp 00:0e: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.167255] pnp: PnP ACPI: found 15 devices
[    0.167301] ACPI: ACPI bus type pnp unregistered
[    0.167350] PnPBIOS: Disabled by ACPI PNP
[    0.204552] Switching to clocksource acpi_pm
[    0.204687] pci 0000:01:0b.0: BAR 6: assigned [mem 0xd8080000-0xd80fffff pref]
[    0.204747] pci 0000:01:04.0: BAR 6: assigned [mem 0xd8020000-0xd803ffff pref]
[    0.204805] pci 0000:00:08.0: PCI bridge to [bus 01-01]
[    0.204853] pci 0000:00:08.0:   bridge window [io  0x9000-0xafff]
[    0.204905] pci 0000:00:08.0:   bridge window [mem 0xdc000000-0xddffffff]
[    0.204955] pci 0000:00:08.0:   bridge window [mem 0xd8000000-0xd8ffffff pref]
[    0.205020] pci 0000:03:00.0: BAR 6: assigned [mem 0xda000000-0xda01ffff pref]
[    0.205076] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    0.205124] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.205174] pci 0000:00:1e.0:   bridge window [mem 0xda000000-0xdbffffff]
[    0.205224] pci 0000:00:1e.0:   bridge window [mem 0xc8000000-0xd7ffffff pref]
[    0.205295] pci 0000:00:08.0: setting latency timer to 64
[    0.205305] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.205309] pci_bus 0000:00: resource 1 [mem 0x00000000-0x3ffffffff]
[    0.205314] pci_bus 0000:01: resource 0 [io  0x9000-0xafff]
[    0.205317] pci_bus 0000:01: resource 1 [mem 0xdc000000-0xddffffff]
[    0.205321] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xd8ffffff pref]
[    0.205325] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
[    0.205329] pci_bus 0000:03: resource 1 [mem 0xda000000-0xdbffffff]
[    0.205333] pci_bus 0000:03: resource 2 [mem 0xc8000000-0xd7ffffff pref]
[    0.205422] NET: Registered protocol family 2
[    0.205608] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.206236] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.207933] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.207933] Switched to NOHz mode on CPU #0
[    0.208337] TCP: Hash tables configured (established 131072 bind 65536)
[    0.208388] TCP reno registered
[    0.208437] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.208507] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.208867] NET: Registered protocol family 1
[    0.264094] pci 0000:03:00.0: Boot video device
[    0.264102] PCI: CLS 32 bytes, default 32
[    0.264185] Unpacking initramfs...
[    0.693484] Freeing initrd memory: 10868k freed
[    0.709277] audit: initializing netlink socket (disabled)
[    0.709349] type=2000 audit(1307389760.708:1): initialized
[    0.733393] highmem bounce pool size: 64 pages
[    0.733447] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.734031] VFS: Disk quotas dquot_6.5.2
[    0.734187] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.734392] msgmni has been set to 1731
[    0.734709] alg: No test for stdrng (krng)
[    0.734799] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.734858] io scheduler noop registered
[    0.734903] io scheduler deadline registered
[    0.734958] io scheduler cfq registered (default)
[    0.735347] ERST: Table is not found!
[    0.735409] isapnp: Scanning for PnP cards...
[    1.089736] isapnp: No Plug & Play device found
[    1.089918] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.110411] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.130909] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.151692] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.172239] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[    1.172619] Linux agpgart interface v0.103
[    1.172805] agpgart: Detected NVIDIA nForce2 chipset
[    1.182301] agpgart-nvidia 0000:00:00.0: AGP aperture is 128M @ 0xc0000000
[    1.182578] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.182628] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.183534] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.183744] mousedev: PS/2 mouse device common for all mice
[    1.183871] rtc_cmos 00:06: RTC can wake from S4
[    1.184068] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.184143] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    1.184206] cpuidle: using governor ladder
[    1.184251] cpuidle: using governor menu
[    1.184733] TCP cubic registered
[    1.184811] NET: Registered protocol family 10
[    1.185914] Mobile IPv6
[    1.185959] NET: Registered protocol family 17
[    1.186009] Registering the dns_resolver key type
[    1.186090] Using IPI No-Shortcut mode
[    1.186280] PM: Hibernation image not present or could not be loaded.
[    1.186297] registered taskstats version 1
[    1.186995] rtc_cmos 00:06: setting system clock to 2011-06-06 19:49:22 UTC (1307389762)
[    1.187088] Initializing network drop monitor service
[    1.187289] Freeing unused kernel memory: 436k freed
[    1.187919] Write protecting the kernel text: 2788k
[    1.188000] Write protecting the kernel read-only data: 1028k
[    1.208909] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.312296] udevd[46]: starting version 170
[    1.419850] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    1.496289] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[    1.496364] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 22 (level, high) -> IRQ 22
[    1.496428] forcedeth 0000:00:04.0: setting latency timer to 64
[    1.701757] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[    1.701829] skge 0000:01:04.0: PCI INT A -> Link[APC2] -> GSI 17 (level, high) -> IRQ 17
[    1.701951] skge: 1.13 addr 0xdd000000 irq 17 chip Yukon-Lite rev 7
[    1.702950] skge 0000:01:04.0: eth0: addr 00:11:2f:58:46:07
[    1.721455] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    1.721553] 8139cp 0000:01:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    1.732110] Refined TSC clocksource calibration: 1746.820 MHz.
[    1.732171] Switching to clocksource tsc
[    1.734344] usbcore: registered new interface driver usbfs
[    1.734442] usbcore: registered new interface driver hub
[    1.736109] usbcore: registered new device driver usb
[    1.763038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.765507] 8139too: 8139too Fast Ethernet driver 0.9.28
[    1.765790] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[    1.765855] 8139too 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
[    1.767377] 8139too 0000:01:08.0: eth1: RealTek RTL8139 at 0x9400, 00:48:54:1b:a9:85, IRQ 18
[    1.812523] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.824585] SCSI subsystem initialized
[    1.874698] libata version 3.00 loaded.
[    1.884255] sata_sil 0000:01:0b.0: version 2.4
[    1.884343] sata_sil 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
[    1.885123] scsi0 : sata_sil
[    1.885388] scsi1 : sata_sil
[    1.885501] ata1: SATA max UDMA/100 mmio m512@0xdd005000 tf 0xdd005080 irq 18
[    1.885553] ata2: SATA max UDMA/100 mmio m512@0xdd005000 tf 0xdd0050c0 irq 18
[    2.020510] forcedeth 0000:00:04.0: eth2: Features changed: 0x00004800 -> 0x00004000
[    2.021429] forcedeth 0000:00:04.0: ifname eth2, PHY OUI 0x732 @ 1, addr 00:11:2f:58:35:d2
[    2.021489] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[    2.021992] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 21
[    2.022056] firewire_ohci 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 21 (level, high) -> IRQ 21
[    2.022119] firewire_ohci 0000:00:0d.0: setting latency timer to 64
[    2.076098] firewire_ohci: Added fw-ohci device 0000:00:0d.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
[    2.076461] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[    2.076523] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 20 (level, high) -> IRQ 20
[    2.076616] ehci_hcd 0000:00:02.2: setting latency timer to 64
[    2.076621] ehci_hcd 0000:00:02.2: EHCI Host Controller
[    2.076728] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[    2.076831] ehci_hcd 0000:00:02.2: debug port 1
[    2.076884] ehci_hcd 0000:00:02.2: cache line size of 32 is not supported
[    2.076904] ehci_hcd 0000:00:02.2: irq 20, io mem 0xde082000
[    2.088029] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[    2.088136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.088186] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.088242] usb usb1: Product: EHCI Host Controller
[    2.088288] usb usb1: Manufacturer: Linux 2.6.39-1-686-pae ehci_hcd
[    2.088336] usb usb1: SerialNumber: 0000:00:02.2
[    2.088596] hub 1-0:1.0: USB hub found
[    2.088649] hub 1-0:1.0: 6 ports detected
[    2.089046] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[    2.089102] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, high) -> IRQ 22
[    2.089193] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    2.089198] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    2.089266] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.089369] ohci_hcd 0000:00:02.0: irq 22, io mem 0xde086000
[    2.146037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.146092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.146148] usb usb2: Product: OHCI Host Controller
[    2.146194] usb usb2: Manufacturer: Linux 2.6.39-1-686-pae ohci_hcd
[    2.146242] usb usb2: SerialNumber: 0000:00:02.0
[    2.146608] hub 2-0:1.0: USB hub found
[    2.150050] hub 2-0:1.0: 3 ports detected
[    2.150211] pata_amd 0000:00:09.0: version 0.4.1
[    2.150307] pata_amd 0000:00:09.0: setting latency timer to 64
[    2.150997] scsi2 : pata_amd
[    2.151206] scsi3 : pata_amd
[    2.151915] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    2.151966] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    2.152529] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[    2.152587] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 21 (level, high) -> IRQ 21
[    2.152681] ohci_hcd 0000:00:02.1: setting latency timer to 64
[    2.152686] ohci_hcd 0000:00:02.1: OHCI Host Controller
[    2.152751] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[    2.152843] ohci_hcd 0000:00:02.1: irq 21, io mem 0xde081000
[    2.204047] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    2.210033] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.210083] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.210140] usb usb3: Product: OHCI Host Controller
[    2.210187] usb usb3: Manufacturer: Linux 2.6.39-1-686-pae ohci_hcd
[    2.210234] usb usb3: SerialNumber: 0000:00:02.1
[    2.210697] hub 3-0:1.0: USB hub found
[    2.210752] hub 3-0:1.0: 3 ports detected
[    2.220535] ata1.00: ATA-6: HDS722516VLSA80, V34OA63A, max UDMA/100
[    2.220590] ata1.00: 321672960 sectors, multi 16: LBA48 
[    2.244515] ata1.00: configured for UDMA/100
[    2.244796] scsi 0:0:0:0: Direct-Access     ATA      HDS722516VLSA80  V34O PQ: 0 ANSI: 5
[    2.324379] ata3.00: ATAPI: TSSTcorpCD/DVDW TS-H542A, TS01, max UDMA/33
[    2.324441] ata3.01: ATAPI: IOMEGA  ZIP 100       ATAPI, 13.A, max PIO2, CDB intr
[    2.324507] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[    2.324514] ata3: nv_mode_filter: 0x7&0xfff9f->0x7, BIOS=0x0 (0xc0000000) ACPI=0x1 (60:600:0x13)
[    2.340296] ata3.00: configured for UDMA/33
[    2.356301] ata3.01: configured for PIO2
[    2.456025] usb 1-5: new high speed USB device number 3 using ehci_hcd
[    2.564041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[    2.572242] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL00, max UDMA/100
[    2.576181] firewire_core: created device fw0: GUID 00e01800008e3614, S400
[    2.588271] ata2.00: configured for UDMA/100
[    2.590709] usb 1-5: New USB device found, idVendor=058f, idProduct=6362
[    2.590760] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.590809] usb 1-5: Product: Mass Storage Device
[    2.590855] usb 1-5: Manufacturer: Generic
[    2.590901] usb 1-5: SerialNumber: 058F312D81B
[    2.594468] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL00 PQ: 0 ANSI: 5
[    2.596386] scsi 2:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-H542A TS01 PQ: 0 ANSI: 5
[    2.601076] scsi 2:0:1:0: Direct-Access     IOMEGA   ZIP 100          13.A PQ: 0 ANSI: 5
[    2.843684] sd 0:0:0:0: [sda] 321672960 512-byte logical blocks: (164 GB/153 GiB)
[    2.843823] sd 0:0:0:0: [sda] Write Protect is off
[    2.843872] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.843965] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.844841] sda: detected capacity change from 0 to 164696555520
[    2.847580] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.847648] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.848526] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.848790] usbcore: registered new interface driver uas
[    2.850852] sr1: scsi3-mmc drive: 0x/40x writer cd/rw xa/form2 cdda tray
[    2.851174] sr 2:0:0:0: Attached scsi CD-ROM sr1
[    2.857156] sd 2:0:1:0: [sdb] Attached SCSI removable disk
[    2.864892] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.865239] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.866163] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.866406] sd 2:0:1:0: Attached scsi generic sg3 type 0
[    2.876082] usb 2-2: new low speed USB device number 2 using ohci_hcd
[    2.927217]  sda: sda1 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[    2.928562] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.956255] Initializing USB Mass Storage driver...
[    2.958213] scsi4 : usb-storage 1-5:1.0
[    2.962344] usbcore: registered new interface driver usb-storage
[    2.962399] USB Mass Storage support registered.
[    3.088894] usb 2-2: New USB device found, idVendor=046d, idProduct=c05a
[    3.088973] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.089023] usb 2-2: Product: USB Optical Mouse
[    3.089069] usb 2-2: Manufacturer: Logitech
[    3.121516] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input1
[    3.121843] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:02.0-2/input0
[    3.122272] usbcore: registered new interface driver usbhid
[    3.122321] usbhid: USB HID core driver
[    3.648632] [drm] Initialized drm 1.1.0 20060810
[    3.721369] [drm] radeon kernel modesetting enabled.
[    3.721698] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    3.721763] radeon 0000:03:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[    3.723384] [drm] initializing kernel modesetting (RV280 0x1002:0x5960).
[    3.723487] [drm] register mmio base: 0xDB000000
[    3.723533] [drm] register mmio size: 65536
[    3.725332] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
[    3.725400] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
[    3.725546] radeon 0000:03:00.0: putting AGP V3 device into 8x mode
[    3.725601] radeon 0000:03:00.0: GTT: 128M 0xC0000000 - 0xC7FFFFFF
[    3.725652] [drm] Generation 2 PCI interface, using max accessible memory
[    3.725704] radeon 0000:03:00.0: VRAM: 128M 0x00000000C8000000 - 0x00000000CFFFFFFF (128M used)
[    3.725772] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.725820] [drm] Driver supports precise vblank timestamp query.
[    3.725903] [drm] radeon: irq initialized.
[    3.726061] [drm] Detected VRAM RAM=128M, BAR=128M
[    3.726117] [drm] RAM width 64bits DDR
[    3.726284] [TTM] Zone  kernel: Available graphics memory: 443368 kiB.
[    3.726334] [TTM] Zone highmem: Available graphics memory: 774092 kiB.
[    3.726382] [TTM] Initializing pool allocator.
[    3.726479] [drm] radeon: 128M of VRAM memory ready
[    3.726526] [drm] radeon: 128M of GTT memory ready.
[    3.727878] radeon 0000:03:00.0: WB disabled
[    3.728859] [drm] Loading R200 Microcode
[    3.737626] [drm] radeon: ring at 0x00000000C0001000
[    3.737698] [drm] ring test succeeded in 0 usecs
[    3.738107] [drm] radeon: ib pool ready.
[    3.738249] [drm] ib test succeeded in 0 usecs
[    3.738677] [drm] Radeon Display Connectors
[    3.738723] [drm] Connector 0:
[    3.738766] [drm]   VGA
[    3.738810] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    3.738857] [drm]   Encoders:
[    3.738901] [drm]     CRT1: INTERNAL_DAC1
[    3.738945] [drm] Connector 1:
[    3.738988] [drm]   DVI-I
[    3.739031] [drm]   HPD1
[    3.739075] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    3.739121] [drm]   Encoders:
[    3.739164] [drm]     CRT2: INTERNAL_DAC2
[    3.739209] [drm]     DFP1: INTERNAL_TMDS1
[    3.739253] [drm] Connector 2:
[    3.739296] [drm]   S-video
[    3.739338] [drm]   Encoders:
[    3.739381] [drm]     TV1: INTERNAL_DAC2
[    3.988791] scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    3.988904] [drm] fb mappable at 0xC8040000
[    3.988950] [drm] vram apper at 0xC8000000
[    3.988995] [drm] size 5242880
[    3.989038] [drm] fb depth is 24
[    3.989082] [drm]    pitch is 5120
[    3.990056] fbcon: radeondrmfb (fb0) is primary device
[    4.116699] Console: switching to colour frame buffer device 160x64
[    4.139843] fb0: radeondrmfb frame buffer device
[    4.139963] drm: registered panic notifier
[    4.140087] [drm] Initialized radeon 2.9.0 20080528 for 0000:03:00.0 on minor 0
[    4.141703] scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    4.142821] scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
[    4.143678] scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    4.144658] sd 4:0:0:0: Attached scsi generic sg4 type 0
[    4.145021] sd 4:0:0:1: Attached scsi generic sg5 type 0
[    4.145365] sd 4:0:0:2: Attached scsi generic sg6 type 0
[    4.145709] sd 4:0:0:3: Attached scsi generic sg7 type 0
[    4.157787] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[    4.159408] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    4.160294] sd 4:0:0:2: [sde] Attached SCSI removable disk
[    4.161150] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[    4.229791] device-mapper: uevent: version 1.0.3
[    4.230822] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    4.402012] PM: Starting manual resume from disk
[    4.402151] PM: Hibernation image partition 8:1 present
[    4.402154] PM: Looking for hibernation image.
[    4.402433] PM: Image not found (code -22)
[    4.402437] PM: Hibernation image not present or could not be loaded.
[    4.409874] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[    4.409883] PM: Basic memory bitmaps created
[    4.421136] PM: Basic memory bitmaps freed
[    4.471947] EXT3-fs: barriers not enabled
[    4.489633] kjournald starting.  Commit interval 5 seconds
[    4.489806] EXT3-fs (sda8): mounted filesystem with ordered data mode
[    6.070745] udevd[366]: starting version 170
[   12.475592] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   12.566142] ACPI: acpi_idle registered with cpuidle
[   12.599792] parport_pc 00:0b: reported by Plug and Play ACPI
[   12.645880] ACPI: Power Button [PWRB]
[   12.720405] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   12.765285] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   12.782699] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   12.855206] ACPI: Power Button [PWRF]
[   12.874325] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.890229] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   12.928684] udevd[388]: renamed network interface eth2 to eth5
[   13.001218] i2c i2c-5: nForce2 SMBus adapter at 0x5000
[   13.023260] udevd[396]: renamed network interface eth0 to rename2
[   13.043405] udevd[406]: renamed network interface eth1 to eth2
[   13.099469] Linux media interface: v0.10
[   13.151124] parport0: Printer, HEWLETT-PACKARD DESKJET 710C
[   13.283765] i2c i2c-6: nForce2 SMBus adapter at 0x5500
[   13.376330] udevd[396]: renamed network interface rename2 to eth1
[   13.489340] gameport gameport0: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 59659kHz
[   13.649674] Linux video capture interface: v2.00
[   13.913884] IR NEC protocol handler initialized
[   14.104386] bttv: driver version 0.9.18 loaded
[   14.117740] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   14.152650] IR RC5(x) protocol handler initialized
[   14.166229] bttv: Bt8xx card found (0).
[   14.267515] bttv 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[   14.312106] IR RC6 protocol handler initialized
[   14.377770] bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 19, latency: 32, mmio: 0xd8000000
[   14.416068] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[   14.428683] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[   14.498070] IR JVC protocol handler initialized
[   14.516546] bttv0: gpio: en=00000000, out=00000000 in=00ff27ff [init]
[   14.516810] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[   14.543808] bttv0: miro: id=9 tuner=3 radio=no stereo=no
[   14.555820] bttv0: tuner type=3
[   14.657589] IR Sony protocol handler initialized
[   14.708188] i2c-core: driver [msp3400] using legacy suspend method
[   14.719877] i2c-core: driver [msp3400] using legacy resume method
[   14.823556] lirc_dev: IR Remote Control driver registered, major 249 
[   14.909639] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20
[   14.920956] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20
[   14.979563] IR LIRC bridge handler initialized
[   15.023229] Intel ICH 0000:00:06.0: setting latency timer to 64
[   15.042496] bttv0: audio absent, no audio device found!
[   15.235311] i2c-core: driver [tuner] using legacy suspend method
[   15.246277] i2c-core: driver [tuner] using legacy resume method
[   15.329785] All bytes are equal. It is not a TEA5767
[   15.340374] tuner 7-0060: Tuner -1 found with type(s) Radio TV.
[   15.351112] intel8x0_measure_ac97_clock: measured 58146 usecs (2816 samples)
[   15.361478] intel8x0: clocking to 48000
[   15.465700] tuner-simple 7-0060: creating new instance
[   15.475848] tuner-simple 7-0060: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
[   15.492233] bttv0: registered device video0
[   15.502227] bttv0: registered device vbi0
[   15.512052] bttv0: PLL: 28636363 => 35468950 .. ok
[   15.560029] Bt87x 0000:01:07.1: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[   15.579179] bt87x0: Using board 1, analog, digital (rate 32000 Hz)
[   15.590281] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[   15.632374] C-Media PCI 0000:01:0a.0: PCI INT A -> Link[APC1] -> GSI 16 (level, high) -> IRQ 16
[   17.535958] Adding 610400k swap on /dev/sda10.  Priority:-1 extents:1 across:610400k 
[   17.872997] EXT3-fs (sda8): using internal journal
[   18.188111] lp0: using parport0 (interrupt-driven).
[   18.279008] Uniform Multi-Platform E-IDE driver
[   18.296632] ide-cd driver 5.00
[   18.337956] ide-gd driver 1.18
[   18.373499] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[   21.383595] EXT3-fs: barriers not enabled
[   21.412405] kjournald starting.  Commit interval 5 seconds
[   21.419643] EXT3-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[   21.427724] EXT3-fs (sda1): using internal journal
[   21.434309] EXT3-fs (sda1): mounted filesystem with ordered data mode
[   21.520251] EXT3-fs: barriers not enabled
[   21.535934] kjournald starting.  Commit interval 5 seconds
[   21.542584] EXT3-fs (dm-3): warning: maximal mount count reached, running e2fsck is recommended
[   21.549683] EXT3-fs (dm-3): using internal journal
[   21.556521] EXT3-fs (dm-3): mounted filesystem with ordered data mode
[   21.582276] EXT3-fs: barriers not enabled
[   21.596539] kjournald starting.  Commit interval 5 seconds
[   21.603552] EXT3-fs (dm-1): using internal journal
[   21.610186] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[   21.632834] EXT3-fs: barriers not enabled
[   21.639925] kjournald starting.  Commit interval 5 seconds
[   21.646925] EXT3-fs (dm-2): using internal journal
[   21.653608] EXT3-fs (dm-2): mounted filesystem with ordered data mode
[   21.896168] EXT3-fs: barriers not enabled
[   21.913574] kjournald starting.  Commit interval 5 seconds
[   21.922230] EXT3-fs (dm-0): using internal journal
[   21.928978] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[   21.960743] EXT3-fs: barriers not enabled
[   21.984823] kjournald starting.  Commit interval 5 seconds
[   21.985245] EXT3-fs (dm-4): using internal journal
[   21.985253] EXT3-fs (dm-4): mounted filesystem with ordered data mode
[   24.819127] RPC: Registered udp transport module.
[   24.833608] RPC: Registered tcp transport module.
[   24.840709] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   24.928277] FS-Cache: Loaded
[   24.997482] FS-Cache: Netfs 'nfs' registered for caching
[   25.031788] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   26.930230] fuse init (API version 7.16)
[   27.229055] ttyS0: LSR safety check engaged!
[   27.231283] ttyS0: LSR safety check engaged!
[   27.241200] ttyS2: LSR safety check engaged!
[   27.242997] ttyS2: LSR safety check engaged!
[   27.245358] ttyS3: LSR safety check engaged!
[   27.247142] ttyS3: LSR safety check engaged!
[   27.555067] ip_tables: (C) 2000-2006 Netfilter Core Team
[   29.179601] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   29.222186] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
[   29.750627] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   29.752824] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[   29.753027] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[   29.941841] xt_time: kernel timezone is +0200
[   30.669213] u32 classifier
[   30.669300]     Performance counters on
[   30.669401]     input device check on
[   30.669495]     Actions configured
[   36.565681] forcedeth 0000:00:04.0: eth5: no link during initialization
[   36.566596] ADDRCONF(NETDEV_UP): eth5: link is not ready
[   36.610494] skge 0000:01:04.0: eth1: enabling interface
[   36.650763] 8139too 0000:01:08.0: eth2: link up, 100Mbps, full-duplex, lpa 0x41E1
[   38.485642] Bluetooth: Core ver 2.16
[   38.485808] NET: Registered protocol family 31
[   38.485925] Bluetooth: HCI device and connection manager initialized
[   38.486095] Bluetooth: HCI socket layer initialized
[   38.486223] Bluetooth: L2CAP socket layer initialized
[   38.486952] Bluetooth: SCO socket layer initialized
[   38.500908] Bluetooth: RFCOMM TTY layer initialized
[   38.501059] Bluetooth: RFCOMM socket layer initialized
[   38.501196] Bluetooth: RFCOMM ver 1.11
[   38.748858] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   38.749016] Bluetooth: BNEP filters: protocol multicast
[   39.298771] ppdev: user-space parallel port driver
[   47.520019] eth1: no IPv6 routers present
[   52.856202] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   52.878762] NFSD: starting 90-second grace period
[   99.172637] PM: Syncing filesystems ... done.
[   99.201834] PM: Preparing system for mem sleep
[   99.228873] Freezing user space processes ... (elapsed 0.01 seconds) done.
[   99.244116] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[   99.260097] PM: Entering mem sleep
[   99.260133] Suspending console(s) (use no_console_suspend to debug)
[   99.260964] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   99.264568] ns558 00:0e: disabled
[   99.264638] mpu401 00:0d: disabled
[   99.264718] parport_pc 00:0b: disabled
[   99.264782] serial 00:0a: disabled
[   99.264844] serial 00:09: disabled
[   99.264853] serial 00:09: wake-up capability disabled by ACPI
[   99.275463] C-Media PCI 0000:01:0a.0: PCI INT A disabled
[   99.275498] ACPI handle has no context!
[   99.275594] Bt87x 0000:01:07.1: PCI INT A disabled
[   99.275650] ACPI handle has no context!
[   99.275686] skge 0000:01:04.0: eth1: disabling interface
[   99.279057] Intel ICH 0000:00:06.0: PCI INT A disabled
[   99.281291] radeon 0000:03:00.0: PCI INT A disabled
[   99.281320] ohci_hcd 0000:00:02.1: PCI INT B disabled
[   99.281335] ohci_hcd 0000:00:02.0: PCI INT A disabled
[   99.292032] ehci_hcd 0000:00:02.2: PCI INT C disabled
[   99.362781] sd 0:0:0:0: [sda] Stopping disk
[   99.833851] sata_sil 0000:01:0b.0: PCI INT A disabled
[   99.848038] PM: suspend of devices complete after 587.382 msecs
[   99.848646] skge 0000:01:04.0: PME# enabled
[   99.848669] pci 0000:00:08.0: wake-up capability enabled by ACPI
[   99.928119] PM: late suspend of devices complete after 80.074 msecs
[   99.928193] ACPI: Preparing to enter system sleep state S3
[  100.175340] PM: Saving platform NVS memory
[  100.175445] Disabling non-boot CPUs ...
[  100.175445] ACPI: Low-level resume complete
[  100.175445] PM: Restoring platform NVS memory
[  100.176550] ACPI: Waking up from system sleep state S3
[  100.176789] agpgart-nvidia 0000:00:00.0: restoring config space at offset 0x4 (was 0x8, writing 0xc0000008)
[  100.176836] pci 0000:00:00.4: restoring config space at offset 0xf (was 0x0, writing 0xff)
[  100.176850] pci 0000:00:00.5: restoring config space at offset 0xf (was 0x0, writing 0xff)
[  100.176895] nForce2_smbus 0000:00:01.1: restoring config space at offset 0xf (was 0x1030100, writing 0x1030109)
[  100.176909] nForce2_smbus 0000:00:01.1: restoring config space at offset 0x4 (was 0x1, writing 0xdc01)
[  100.176941] ohci_hcd 0000:00:02.0: restoring config space at offset 0x1 (was 0xb00002, writing 0xb00003)
[  100.176973] ohci_hcd 0000:00:02.1: restoring config space at offset 0x1 (was 0xb00002, writing 0xb00003)
[  100.192024] forcedeth 0000:00:04.0: BAR 0: set to [mem 0xde083000-0xde083fff] (PCI address [0xde083000-0xde083fff])
[  100.192032] forcedeth 0000:00:04.0: BAR 1: set to [io  0xe000-0xe007] (PCI address [0xe000-0xe007])
[  100.192042] forcedeth 0000:00:04.0: restoring config space at offset 0xf (was 0x14010100, writing 0x14010109)
[  100.192058] forcedeth 0000:00:04.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[  100.192130] pci 0000:00:08.0: restoring config space at offset 0x7 (was 0x2280a090, writing 0xb280a090)
[  100.208016] pata_amd 0000:00:09.0: BAR 4: set to [io  0xf000-0xf00f] (PCI address [0xf000-0xf00f])
[  100.208037] pata_amd 0000:00:09.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00005)
[  100.224015] firewire_ohci 0000:00:0d.0: BAR 0: set to [mem 0xde084000-0xde0847ff] (PCI address [0xde084000-0xde0847ff])
[  100.224022] firewire_ohci 0000:00:0d.0: BAR 1: set to [mem 0xde085000-0xde08503f] (PCI address [0xde085000-0xde08503f])
[  100.224032] firewire_ohci 0000:00:0d.0: restoring config space at offset 0xf (was 0x1030100, writing 0x1030109)
[  100.224048] firewire_ohci 0000:00:0d.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00007)
[  100.224070] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x220c0c0, writing 0x2220c0c0)
[  100.224093] skge 0000:01:04.0: restoring config space at offset 0xf (was 0x1f170100, writing 0x1f170105)
[  100.224111] skge 0000:01:04.0: restoring config space at offset 0x5 (was 0x1, writing 0x9001)
[  100.224117] skge 0000:01:04.0: restoring config space at offset 0x4 (was 0x0, writing 0xdd000000)
[  100.224124] skge 0000:01:04.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[  100.224131] skge 0000:01:04.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[  100.224157] bttv 0000:01:07.0: restoring config space at offset 0xf (was 0x28100100, writing 0x2810010b)
[  100.224175] bttv 0000:01:07.0: restoring config space at offset 0x4 (was 0x8, writing 0xd8000008)
[  100.224182] bttv 0000:01:07.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802000)
[  100.224189] bttv 0000:01:07.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900006)
[  100.224215] Bt87x 0000:01:07.1: restoring config space at offset 0xf (was 0xff040100, writing 0xff04010b)
[  100.224233] Bt87x 0000:01:07.1: restoring config space at offset 0x4 (was 0x8, writing 0xd8001008)
[  100.224239] Bt87x 0000:01:07.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000)
[  100.224247] Bt87x 0000:01:07.1: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[  100.224281] 8139too 0000:01:08.0: restoring config space at offset 0x5 (was 0x0, writing 0xdd004000)
[  100.224288] 8139too 0000:01:08.0: restoring config space at offset 0x4 (was 0x1, writing 0x9401)
[  100.224294] 8139too 0000:01:08.0: restoring config space at offset 0x3 (was 0x0, writing 0x2000)
[  100.224302] 8139too 0000:01:08.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900007)
[  100.224323] C-Media PCI 0000:01:0a.0: restoring config space at offset 0xf (was 0x180201ff, writing 0x18020109)
[  100.224342] C-Media PCI 0000:01:0a.0: restoring config space at offset 0x4 (was 0xff01, writing 0x9801)
[  100.224349] C-Media PCI 0000:01:0a.0: restoring config space at offset 0x3 (was 0x0, writing 0x2000)
[  100.224357] C-Media PCI 0000:01:0a.0: restoring config space at offset 0x1 (was 0x2100080, writing 0x2100001)
[  100.224378] sata_sil 0000:01:0b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[  100.224390] sata_sil 0000:01:0b.0: restoring config space at offset 0x9 (was 0x0, writing 0xdd005000)
[  100.224397] sata_sil 0000:01:0b.0: restoring config space at offset 0x8 (was 0x1, writing 0xac01)
[  100.224404] sata_sil 0000:01:0b.0: restoring config space at offset 0x7 (was 0x1, writing 0xa801)
[  100.224410] sata_sil 0000:01:0b.0: restoring config space at offset 0x6 (was 0x1, writing 0xa401)
[  100.224417] sata_sil 0000:01:0b.0: restoring config space at offset 0x5 (was 0x1, writing 0xa001)
[  100.224423] sata_sil 0000:01:0b.0: restoring config space at offset 0x4 (was 0x1, writing 0x9c01)
[  100.224430] sata_sil 0000:01:0b.0: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[  100.224437] sata_sil 0000:01:0b.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[  100.224458] radeon 0000:03:00.0: restoring config space at offset 0xf (was 0x801ff, writing 0x8010b)
[  100.224471] radeon 0000:03:00.0: restoring config space at offset 0x6 (was 0x0, writing 0xdb000000)
[  100.224477] radeon 0000:03:00.0: restoring config space at offset 0x5 (was 0x1, writing 0xc001)
[  100.224482] radeon 0000:03:00.0: restoring config space at offset 0x4 (was 0x8, writing 0xc8000008)
[  100.224488] radeon 0000:03:00.0: restoring config space at offset 0x3 (was 0x800000, writing 0x802008)
[  100.224495] radeon 0000:03:00.0: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00007)
[  100.224521] pci 0000:03:00.1: restoring config space at offset 0x5 (was 0x0, writing 0xdb010000)
[  100.224527] pci 0000:03:00.1: restoring config space at offset 0x4 (was 0x8, writing 0xd0000008)
[  100.224533] pci 0000:03:00.1: restoring config space at offset 0x3 (was 0x0, writing 0x2008)
[  100.224727] PM: early resume of devices complete after 47.991 msecs
[  100.225180] agpgart-nvidia 0000:00:00.0: nForce2 C1 Halt Disconnect fixup
[  100.225331] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, high) -> IRQ 22
[  100.225339] ohci_hcd 0000:00:02.0: setting latency timer to 64
[  100.225363] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 21 (level, high) -> IRQ 21
[  100.225370] ohci_hcd 0000:00:02.1: setting latency timer to 64
[  100.225392] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 20 (level, high) -> IRQ 20
[  100.225399] ehci_hcd 0000:00:02.2: setting latency timer to 64
[  100.225748] Intel ICH 0000:00:06.0: PCI INT A -> Link[APCJ] -> GSI 20 (level, high) -> IRQ 20
[  100.225755] Intel ICH 0000:00:06.0: setting latency timer to 64
[  100.225787] pci 0000:00:08.0: setting latency timer to 64
[  100.225803] pata_amd 0000:00:09.0: setting latency timer to 64
[  100.225855] pci 0000:00:08.0: wake-up capability disabled by ACPI
[  100.225863] skge 0000:01:04.0: PME# disabled
[  100.225893] skge 0000:01:04.0: eth1: enabling interface
[  100.230434] Bt87x 0000:01:07.1: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[  100.230470] 8139too 0000:01:08.0: eth2: link down
[  100.230517] C-Media PCI 0000:01:0a.0: PCI INT A -> Link[APC1] -> GSI 16 (level, high) -> IRQ 16
[  100.230619] sata_sil 0000:01:0b.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18
[  100.230654] radeon 0000:03:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19
[  100.230666] [drm] AGP mode requested: 8
[  100.230671] agpgart-nvidia 0000:00:00.0: AGP 3.0 bridge
[  100.230693] agpgart-nvidia 0000:00:00.0: putting AGP V3 device into 8x mode
[  100.230789] radeon 0000:03:00.0: putting AGP V3 device into 8x mode
[  100.230800] radeon 0000:03:00.0: GTT: 128M 0xC0000000 - 0xC7FFFFFF
[  100.254779] radeon 0000:03:00.0: WB disabled
[  100.254821] [drm] radeon: ring at 0x00000000C0001000
[  100.254841] [drm] ring test succeeded in 0 usecs
[  100.254855] [drm] ib test succeeded in 0 usecs
[  100.278918] serial 00:09: activated
[  100.279310] serial 00:0a: activated
[  100.279910] parport_pc 00:0b: activated
[  100.280103] bttv0: reset, reinitialize
[  100.280137] bttv0: PLL: 28636363 => 35468950 .
[  100.280561] mpu401 00:0d: activated
[  100.280887] ns558 00:0e: activated
[  100.315960] .
[  100.315982] sd 0:0:0:0: [sda] Starting disk
[  100.366436]  ok
[  100.428876] firewire_core: skipped bus generations, destroying all nodes
[  100.429234] ata3.01: ACPI cmd ef/03:20:00:00:00:b0 (SET FEATURES) filtered out
[  100.429239] ata3.01: ACPI cmd ef/03:08:00:00:00:b0 (SET FEATURES) filtered out
[  100.472645] 8139too 0000:01:08.0: eth2: link up, 100Mbps, full-duplex, lpa 0x41E1
[  100.508395] ata3.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
[  100.508401] ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[  100.508422] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
[  100.508430] ata3: nv_mode_filter: 0x7&0xfff9f->0x7, BIOS=0x0 (0xc0000000) ACPI=0x1 (60:600:0x13)
[  100.524567] ata3.00: configured for UDMA/33
[  100.540311] ata3.01: configured for PIO2
[  100.580022] usb 1-5: reset high speed USB device number 3 using ehci_hcd
[  100.588043] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  100.612238] ata2.00: configured for UDMA/100
[  100.749195] forcedeth 0000:00:04.0: eth5: no link during initialization
[  100.928040] firewire_core: rediscovered device fw0
[  104.284041] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  104.340510] ata1.00: configured for UDMA/100
[  104.353585] PM: resume of devices complete after 4128.547 msecs
[  104.494790] PM: Finishing wakeup.
[  104.494794] Restarting tasks ... done.

Reply to: