[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#628136: linux-image-2.6.38-2-ixp4xx fails to install



Package: linux-2.6
Version: 2.6.38-5
Severity: critical
Justification: breaks the whole system

Selecting previously deselected package linux-image-2.6.38-2-ixp4xx.
(Reading database ... 32586 files and directories currently installed.)
Unpacking linux-image-2.6.38-2-ixp4xx (from .../linux-image-2.6.38-2-ixp4xx_2.6.38-5_armel.deb) ...
Setting up linux-image-2.6.38-2-ixp4xx (2.6.38-5) ...
Running depmod.
Running update-initramfs.
update-initramfs: deferring update (hook will be called later)
Running flash-kernel.
Can't find /boot/vmlinuz-2.6.38-2-ixp4xx and /boot/initrd.img-2.6.38-2-ixp4xx
User postinst hook script [flash-kernel] exited with value 1
dpkg: error processing linux-image-2.6.38-2-ixp4xx (--configure):
 subprocess installed post-installation script returned error exit status 1
configured to not write apport reports
                                      dpkg: dependency problems prevent configuration of linux-image-2.6-ixp4xx:
 linux-image-2.6-ixp4xx depends on linux-image-2.6.38-2-ixp4xx; however:
  Package linux-image-2.6.38-2-ixp4xx is not configured yet.
dpkg: error processing linux-image-2.6-ixp4xx (--configure):
 dependency problems - leaving unconfigured
configured to not write apport reports
                                      Errors were encountered while processing:
 linux-image-2.6.38-2-ixp4xx
 linux-image-2.6-ixp4xx
E: Sub-process /usr/bin/dpkg returned an error code (1)



-- Package-specific info:
** Kernel log: boot messages should be attached

** Model information
Processor	: XScale-IXP42x Family rev 1 (v5l)
Hardware	: Linksys NSLU2
Revision	: 0000

** PCI devices:
00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 8 (250ns min, 10500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at 48000000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
	Subsystem: NEC Corporation Hama USB 2.0 CardBus [1033:0035]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 8 (250ns min, 10500ns max), Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 27
	Region 0: Memory at 48001000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci_hcd

00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
	Subsystem: NEC Corporation USB 2.0 [1033:00e0]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 68 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
	Interrupt: pin C routed to IRQ 26
	Region 0: Memory at 48002000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0c0b:b157 Dura Micro, Inc. (Acomdata) 
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 004: ID 03f0:4607 Hewlett-Packard 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: armel (armv5tel)

Kernel: Linux 2.6.32-5-ixp4xx
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.38-2-ixp4xx depends on:
ii  debconf [debconf-2.0]         1.5.39     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.38-2-ixp4xx recommends:
ii  firmware-linux-free           3          Binary firmware for various driver

Versions of packages linux-image-2.6.38-2-ixp4xx suggests:
pn  fdutils                       <none>     (no description available)
pn  linux-doc-2.6.38              <none>     (no description available)

Versions of packages linux-image-2.6.38-2-ixp4xx is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.38-2-ixp4xx/postinst/ignoring-do-bootloader-2.6.38-2-ixp4xx:
  linux-image-2.6.38-2-ixp4xx/postinst/depmod-error-initrd-2.6.38-2-ixp4xx: false
  linux-image-2.6.38-2-ixp4xx/prerm/removing-running-kernel-2.6.38-2-ixp4xx: true
  linux-image-2.6.38-2-ixp4xx/postinst/missing-firmware-2.6.38-2-ixp4xx:



Reply to: