Your message dated Tue, 17 May 2011 04:42:30 +0100 with message-id <1305603750.19966.117.camel@localhost> and subject line Re: Follow-up has caused the Debian Bug report #619433, regarding linux-image-2.6.38-1-686: early crash with ACPI (regression) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 619433: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=619433 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.38-1-686: early crash with ACPI (regression)
- From: Pascal DORMEAU <pdormeau@free.fr>
- Date: Wed, 23 Mar 2011 21:37:12 +0100
- Message-id: <20110323203712.1320.3718.reportbug@raisin>
Package: linux-2.6 Version: 2.6.38-1 Severity: important Hello, My laptop cannot boot anymore with latest 2.6.38 kernel (also tested with all available 2.6.38 rc in experimental) while ACPI support is enabled. As mentioned in the object, I suspect an ACPI related problem. Indeed booting with ACPI=off allows ending the boot sequence but many functionalities are lost including the cardbus support and consequently the wifi connexion (I must admit that I have not investigated a lot how to recover it without acpi). I wish I could have ACPI support as I had with all older kernels up to 2.6.37. I am currently running 2.6.37-2-686 version without any problem. I cannot provide a descent dmesg output because the crash occurs early in the boot. I recorded the boot and the video is available at http://dl.free.fr/kUzM29dEp but I fair it does not give usefull information. I am aware that only this and lspci output do not result in a valuable bug report. Could you please tell me what usefull information I could provide? Can a dmesg from the working 2.6.37 help ? Can a dmesg with 2.6.38 and ACPI=off help ? Thanks in advance for advice. Regards Pascal Dormeau -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information not available ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc R200 AGP Bridge [Mobility Radeon 7000 IGP] [1002:cab3] (rev 05) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: Memory at b0000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at b4000000 (32-bit, prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: agpgart-ati 00:01.0 PCI bridge [0604]: ATI Technologies Inc PCI Bridge [IGP 340M] [1002:7010] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000c000-0000dfff Memory behind bridge: e0000000-efffffff Prefetchable memory behind bridge: a0000000-afffffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:13.0 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #1 [1002:4347] (rev 01) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0001000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc OHCI USB Controller #2 [1002:4348] (rev 01) (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f0002000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc EHCI USB Controller [1002:4345] (rev 01) (prog-if 20 [EHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at 5c000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SMBus [1002:4353] (rev 18) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: I/O ports at e000 [size=16] Region 1: Memory at f0000000 (32-bit, non-prefetchable) [size=1K] Kernel driver in use: piix4_smbus 00:14.1 IDE interface [0101]: ATI Technologies Inc Dual Channel Bus Master PCI IDE Controller [1002:4349] (prog-if 8a [Master SecP PriP]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 8070 [size=16] Kernel driver in use: pata_atiixp 00:14.3 ISA bridge [0601]: ATI Technologies Inc Device [1002:434c] Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP200 3COM 3C920B Ethernet Controller [1002:4342] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=02, subordinate=06, sec-latency=32 I/O behind bridge: 0000a000-0000bfff Memory behind bridge: d0000000-dfffffff Prefetchable memory behind bridge: 90000000-9fffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP150 AC'97 Audio Controller [1002:4341] Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f0000400 (32-bit, non-prefetchable) [size=256] Kernel driver in use: ATI IXP AC97 controller 00:14.6 Modem [0703]: ATI Technologies Inc IXP AC'97 Modem [1002:434d] (rev 01) (prog-if 00 [Generic]) Subsystem: Toshiba America Info Systems Device [1179:0001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 0: Memory at f0000500 (32-bit, non-prefetchable) [size=256] 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility 7000 IGP [1002:4437] (prog-if 00 [VGA controller]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (2000ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at a0000000 (32-bit, prefetchable) [size=128M] Region 1: I/O ports at c000 [size=256] Region 2: Memory at e0000000 (32-bit, non-prefetchable) [size=64K] [virtual] Expansion ROM at a8000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 02:06.0 CardBus bridge [0607]: Texas Instruments PCI1410 PC card Cardbus Controller [104c:ac50] (rev 02) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at d0001000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: 90000000-93fff000 (prefetchable) Memory window 1: d4000000-d7fff000 I/O window 0: 0000a400-0000a4ff I/O window 1: 0000a800-0000a8ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 02:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at a000 [size=256] Region 1: Memory at d0008000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 02:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026] (prog-if 10 [OHCI]) Subsystem: Toshiba America Info Systems Device [1179:ff10] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 5 Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at d0004000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> 03:00.0 Ethernet controller [0200]: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter [168c:0013] (rev 01) Subsystem: D-Link System Inc D-Link AirPlus DWL-G650 Wireless Cardbus Adapter(rev.C) [1186:3a12] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (90, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.37-2-686 (SMP w/2 CPU cores) Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.38-1-686 depends on: ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 3 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.38-1-686 recommends: pn firmware-linux-free <none> (no description available) ii libc6-i686 2.11.2-11 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.38-1-686 suggests: ii grub-pc 1.98+20100804-14 GRand Unified Bootloader, version pn linux-doc-2.6.38 <none> (no description available) Versions of packages linux-image-2.6.38-1-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.28 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.38-1-686/prerm/removing-running-kernel-2.6.38-1-686: true linux-image-2.6.38-1-686/postinst/depmod-error-initrd-2.6.38-1-686: false linux-image-2.6.38-1-686/postinst/ignoring-do-bootloader-2.6.38-1-686: * linux-image-2.6.38-1-686/postinst/missing-firmware-2.6.38-1-686:
--- End Message ---
--- Begin Message ---
- To: 619433-done@bugs.debian.org
- Subject: Re: Follow-up
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Tue, 17 May 2011 04:42:30 +0100
- Message-id: <1305603750.19966.117.camel@localhost>
- In-reply-to: <1112777894.5661661303973013206.JavaMail.root@spooler6-g27.priv.proxad.net>
- References: <1112777894.5661661303973013206.JavaMail.root@spooler6-g27.priv.proxad.net>
Version: 2.6.38-5 On Thu, 2011-04-28 at 08:43 +0200, Pascal Dormeau wrote: > Hello, > > Just to inform that the bug has found a fix upstream > (commit 7bed50c5edf5cba8dd515a31191cbfb6065ddc85, > details can be found at > https://bugzilla.kernel.org/show_bug.cgi?id=31872). > > The fix has been included in linux-2.6 tree and is > waiting in the queue-2.6.38 subdirectory. This was included in stable update 2.6.38.5 and in Debian version 2.6.38-5. > I am currently running a self built linux-2.6.38 image > with the above fix included, and it seems that the bug > did not touch any one but me (given my buggy bios). I > can now wait for next upload in Debian (next 2.6.38 if > any, or next 2.6.39 in experimental or unstable), so I > believe you can just close this bug without any further > action. > > Best regards and thank you for pointing me to the right > place. Thank you for helping to track down the bug! Ben. -- Ben Hutchings Once a job is fouled up, anything done to improve it makes it worse.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---