[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#626021: linux-image-2.6.38-2-686: icebp (opcode 0xf1) no longer causing a SIGTRAP, breaks Wine



Package: linux-2.6
Version: 2.6.38-3
Severity: normal

This is a bug in the kernel itself, there have been a few patches to the kernel, but it seems at least one patch is not in the vanilla kernel. Some other distributions are including this patch. See https://bugzilla.kernel.org/show_bug.cgi?id=16315 and http://bugs.winehq.org/show_bug.cgi?id=23323 for more info.

-- Package-specific info:
** Version:
Linux version 2.6.38-2-686 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 05:24:21 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-2-686 root=UUID=fc173ee2-9266-4bce-b5c3-ff468730f225 ro quiet

** Not tainted

** Kernel log:
[    0.664763] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.664919] Linux agpgart interface v0.103
[    0.665034] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.665505] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.665516] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.665606] mousedev: PS/2 mouse device common for all mice
[    0.665792] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.665965] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.666036] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    0.666047] cpuidle: using governor ladder
[    0.666048] cpuidle: using governor menu
[    0.666192] TCP cubic registered
[    0.666292] NET: Registered protocol family 10
[    0.666726] Mobile IPv6
[    0.666730] NET: Registered protocol family 17
[    0.666735] Registering the dns_resolver key type
[    0.666751] Using IPI No-Shortcut mode
[    0.666819] PM: Hibernation image not present or could not be loaded.
[    0.666826] registered taskstats version 1
[    0.666928] rtc_cmos 00:01: setting system clock to 2011-05-06 19:42:14 UTC (1304710934)
[    0.666944] Initalizing network drop monitor service
[    0.666997] Freeing unused kernel memory: 392k freed
[    0.667098] Write protecting the kernel text: 2648k
[    0.667109] Write protecting the kernel read-only data: 1000k
[    0.679883] <30>udev[45]: starting version 167
[    0.695518] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    0.695633] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    0.695654] 8139cp 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, high) -> IRQ 11
[    0.744936] FDC 0 is a S82078B
[    0.745467] 8139cp 0000:00:03.0: eth0: RTL-8139C+ at 0xc8806000, 52:54:00:12:34:56, IRQ 11
[    0.745490] 8139cp 0000:00:03.0: setting latency timer to 64
[    0.747229] 8139too: 8139too Fast Ethernet driver 0.9.28
[    0.748483] SCSI subsystem initialized
[    0.759932] libata version 3.00 loaded.
[    0.761768] ata_piix 0000:00:01.1: version 2.13
[    0.761824] ata_piix 0000:00:01.1: setting latency timer to 64
[    0.762212] scsi0 : ata_piix
[    0.762298] scsi1 : ata_piix
[    0.762328] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[    0.762330] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[    0.916539] ata1.01: NODEV after polling detection
[    0.916751] ata2.01: NODEV after polling detection
[    0.916959] ata1.00: ATA-7: QEMU HARDDISK, 0.13.0, max UDMA/100
[    0.916961] ata1.00: 20971520 sectors, multi 16: LBA48 
[    0.917096] ata2.00: ATAPI: QEMU DVD-ROM, 0.13.0, max UDMA/100
[    0.917408] ata1.00: configured for MWDMA2
[    0.917492] scsi 0:0:0:0: Direct-Access     ATA      QEMU HARDDISK    0.13 PQ: 0 ANSI: 5
[    0.917864] ata2.00: configured for MWDMA2
[    0.918137] scsi 1:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     0.13 PQ: 0 ANSI: 5
[    0.928603] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB)
[    0.928628] sd 0:0:0:0: [sda] Write Protect is off
[    0.928630] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.928641] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    0.929229] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[    0.929231] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.929407]  sda: sda1 sda2 < sda5 >
[    0.929622] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.929692] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.937670] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.937936] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.081266] PM: Starting manual resume from disk
[    1.081268] PM: Hibernation image partition 8:5 present
[    1.081269] PM: Looking for hibernation image.
[    1.081464] PM: Image not found (code -22)
[    1.081466] PM: Hibernation image not present or could not be loaded.
[    1.098886] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.256117] Refined TSC clocksource calibration: 3208.200 MHz.
[    2.327907] <30>udev[221]: starting version 167
[    2.866819] input: PC Speaker as /devices/platform/pcspkr/input/input1
[    2.875538] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.875595] ACPI: Power Button [PWRF]
[    3.027189] ACPI: acpi_idle registered with cpuidle
[    3.034228] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[    3.064355] parport_pc 00:05: reported by Plug and Play ACPI
[    3.064456] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.413261] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    3.695100] Adding 242684k swap on /dev/sda5.  Priority:-1 extents:1 across:242684k 
[    3.697603] EXT4-fs (sda1): re-mounted. Opts: (null)
[    3.870966] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    3.936586] loop: module loaded
[    4.680018] RPC: Registered udp transport module.
[    4.680020] RPC: Registered tcp transport module.
[    4.680022] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    4.729342] FS-Cache: Loaded
[    4.788979] FS-Cache: Netfs 'nfs' registered for caching
[    4.811188] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    5.009417] fuse init (API version 7.16)
[    5.128988] eth0: link up, 100Mbps, full-duplex, lpa 0x05E1
[    8.738152] sshd (1211): /proc/1211/oom_adj is deprecated, please use /proc/1211/oom_score_adj instead.
[   15.440096] eth0: no IPv6 routers present
[85213.445248] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[85213.445254] ata1.00: failed command: WRITE DMA EXT
[85213.445262] ata1.00: cmd 35/00:00:00:a8:3e/00:04:00:00:00/e0 tag 0 dma 524288 out
[85213.445264]          res 40/00:ff:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[85213.445267] ata1.00: status: { DRDY }
[85213.447954] ata1: soft resetting link
[85213.604314] ata1.01: NODEV after polling detection
[85213.604870] ata1.00: configured for MWDMA2
[85213.604873] ata1.00: device reported invalid CHS sector 0
[85213.604882] ata1: EH complete

** Model information
not available

** Loaded modules:
Module                  Size  Used by
fuse                   55640  1 
nfsd                  196206  2 
exportfs               12527  1 nfsd
nfs                   214151  0 
lockd                  60890  2 nfsd,nfs
fscache                31438  1 nfs
nfs_acl                12463  2 nfsd,nfs
auth_rpcgss            31739  2 nfsd,nfs
sunrpc                136969  6 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
loop                   17805  0 
parport_pc             21895  0 
tpm_tis                12949  0 
tpm                    17454  1 tpm_tis
tpm_bios               12799  1 tpm
i2c_piix4              12480  0 
processor              26983  0 
parport                27018  1 parport_pc
i2c_core               18989  1 i2c_piix4
psmouse                45863  0 
serio_raw              12758  0 
button                 12866  0 
pcspkr                 12515  0 
evdev                  13084  5 
thermal_sys            17667  1 processor
ext4                  251726  1 
mbcache                12810  1 ext4
jbd2                   55701  1 ext4
crc16                  12327  1 ext4
sg                     21385  0 
sr_mod                 17418  0 
sd_mod                 34941  3 
cdrom                  34631  1 sr_mod
crc_t10dif             12332  1 sd_mod
ata_generic            12439  0 
ata_piix               21079  2 
libata                131904  2 ata_generic,ata_piix
8139too                21937  0 
scsi_mod              134369  4 sg,sr_mod,sd_mod,libata
floppy                 47893  0 
8139cp                 22004  0 
mii                    12562  2 8139too,8139cp

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
    inet 10.0.2.15/24 brd 10.0.2.255 scope global eth0
    inet6 fe80::5054:ff:fe12:3456/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo: 123056726  309302    0    0    0     0          0         0 123056726  309302    0    0    0     0       0          0
  eth0: 136430495  117016    0    0    0     0          0         0  9223650   80741    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    423769 total packets received
    0 forwarded
    3 with unknown protocol
    0 incoming packets discarded
    423766 incoming packets delivered
    387273 requests sent out
Icmp:
    146 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 146
    112 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 112
IcmpMsg:
        InType3: 146
        OutType3: 112
Tcp:
    8925 active connections openings
    2382 passive connection openings
    3133 failed connection attempts
    739 connection resets received
    0 connections established
    422005 segments received
    385498 segments send out
    38 segments retransmited
    0 bad segments received.
    4572 resets sent
Udp:
    3773 packets received
    112 packets to unknown port received.
    0 packet receive errors
    4119 packets sent
UdpLite:
TcpExt:
    4273 TCP sockets finished time wait in fast timer
    4387 delayed acks sent
    93 delayed acks further delayed because of locked socket
    64 times the listen queue of a socket overflowed
    64 SYNs to LISTEN sockets dropped
    33832 packets directly queued to recvmsg prequeue.
    665447 bytes directly in process context from backlog
    42938983 bytes directly received in process context from prequeue
    79756 packet headers predicted
    31735 packets header predicted and directly queued to user
    140357 acknowledgments not containing data payload received
    23470 predicted acknowledgments
    34 other TCP timeouts
    2 times receiver scheduled too late for direct processing
    156 connections reset due to unexpected data
    568 connections reset due to early user close
    1 connections aborted due to timeout
IpExt:
    InBcastPkts: 232
    OutBcastPkts: 224
    InOctets: 259310303
    OutOctets: 130967241
    InBcastOctets: 13496
    OutBcastOctets: 10496

*** Device features:
eth0: 0x180
lo: 0x13865

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
	Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
	Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [Master])
	Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
	Region 4: I/O ports at c000 [size=16]
	Kernel driver in use: ata_piix

00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
	Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 9
	Kernel driver in use: piix4_smbus

00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller])
	Subsystem: Red Hat, Inc Device [1af4:1100]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=32M]
	Region 1: Memory at f2000000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at f2010000 [disabled] [size=64K]

00:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 20)
	Subsystem: Red Hat, Inc Device [1af4:1100]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at c100 [size=256]
	Region 1: Memory at f2020000 (32-bit, non-prefetchable) [size=256]
	Expansion ROM at f2030000 [disabled] [size=64K]
	Kernel driver in use: 8139cp


** Sound cards:

-- System Information:
Debian Release: wheezy/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.38-2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.38-2-686 depends on:
ii  debconf [debconf-2.0]         1.5.38     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.98.8     tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.38-2-686 recommends:
pn  firmware-linux-free           <none>     (no description available)
ii  libc6-i686                    2.11.2-11  Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.38-2-686 suggests:
ii  grub-pc                      1.99~rc1-13 GRand Unified Bootloader, version 
pn  linux-doc-2.6.38             <none>      (no description available)

Versions of packages linux-image-2.6.38-2-686 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.38-2-686/postinst/depmod-error-initrd-2.6.38-2-686: false
  linux-image-2.6.38-2-686/postinst/ignoring-do-bootloader-2.6.38-2-686:
  linux-image-2.6.38-2-686/prerm/removing-running-kernel-2.6.38-2-686: true
  linux-image-2.6.38-2-686/postinst/missing-firmware-2.6.38-2-686:



Reply to: