--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.32-5-openvz-amd64: many oops after kexec reboot
- From: Steven Chamberlain <steven@pyro.eu.org>
- Date: Sun, 24 Apr 2011 01:54:55 +0100
- Message-id: <4DB374DF.8040309@pyro.eu.org>
Package: src:linux-2.6
Version: 2.6.32-31
Severity: normal
Hello,
For a few weeks I've been unsuccessful in rebooting a server via the
kexec method. The kernel restarts with all kinds of oops triggered in
the early boot sequence before the initramfs has finished (and before
the root or any swap partitions [within encrypted LVM] are mounted).
kexec reboots worked reliably on this system with 2.6.32-30. I first
noticed this issue on 2.6.32-33, but after reverting to 2.6.32-31 it
still seems reproducible every time.
'Normal' reboots are always successful, and I've never seen any of these
oops appear at any other time.
Examples:
[ 37.826821] swap_free: Bad swap file entry 5677091e848000
[ 37.832669] BUG: Bad page map in process udevd pte:acee123d09000000
pmd:f81ac067
[ 37.840702] addr:00007fa5dda04000 vm_flags:08000070 anon_vma:(null)
mapping:ffff8800fb1c9a20 index:25c
[ 37.850565] vma->vm_ops->fault: filemap_fault+0x0/0x2f8
[ 37.856279] vma->vm_file->f_op->mmap: generic_file_mmap+0x0/0x47
[ 37.862709] Pid: 159, comm: udevd Not tainted 2.6.32-5-openvz-amd64 #1
[ 37.869624] Call Trace:
[ 37.872332] [<ffffffff810cdfdd>] ? print_bad_pte+0x232/0x24a
[ 37.878450] [<ffffffff810cf1a2>] ? unmap_vmas+0x716/0x964
[ 37.884297] [<ffffffff8107810e>] ? pb_add_ref+0x93/0xaa
[ 37.889989] [<ffffffff810d3a73>] ? exit_mmap+0xc9/0x14d
[ 37.895673] [<ffffffff8104bc1e>] ? mmput+0x2b/0xf4
[ 37.900918] [<ffffffff8105028c>] ? exit_mm+0x115/0x120
[ 37.906475] [<ffffffff81051c2c>] ? do_exit+0x206/0x758
[ 37.912058] [<ffffffff810521f4>] ? do_group_exit+0x76/0x9d
[ 37.917978] [<ffffffff8105222d>] ? sys_exit_group+0x12/0x16
[ 37.924023] [<ffffffff81010c12>] ? system_call_fastpath+0x16/0x1b
[ 37.930583] Disabling lock debugging due to kernel taint
[ 1.673507] BUG: unable to handle kernel paging request
[ 1.677059] at ffffc90001d66f98
[ 1.677059] IP: [<ffffffff8117ed09>] strcmp+0x5/0x1a
[ 1.677059] PGD fb81d067 PUD fb81e067 PMD 0
[ 1.677059] Oops: 0000 [#1] SMP
[ 1.677059] last sysfs file: /sys/module/scsi_transport_fc/initstate
[ 1.677059] CPU 3
[ 1.677059] Modules linked in: mptbase libata floppy(+)
scsi_transport_fc scsi_tgt tg3(+) aic7xxx(+) scsi_transport_spi libphy
thermal thermal_sys usbcore nls_base scsi_mod
[ 1.677059] Pid: 234, comm: modprobe Not tainted
2.6.32-5-openvz-amd64 #1 feoktistov Sun Fire V20z
[ 1.677059] RIP: 0010:[<ffffffff8117ed09>] [<ffffffff8117ed09>]
strcmp+0x5/0x1a
[ 1.677059] RSP: 0018:ffff88007f531b50 EFLAGS: 00010246
[ 1.677059] RAX: 0000000000000000 RBX: ffff88007f531d88 RCX:
ffff88007f531d88
[ 1.677059] RDX: 0000000000000069 RSI: ffffc90001d66f98 RDI:
ffffffff813fd600
[ 1.677059] RBP: ffff88007f531ca8 R08: ffff88007f531d88 R09:
0000000000000000
[ 1.677059] R10: ffffffff8165d0d8 R11: 0000000000000000 R12:
0000000000000000
[ 1.677059] R13: ffffc90001d66f98 R14: 0000000000000000 R15:
0000000000000000
[ 1.677059] FS: 00007f0c672ed700(0000) GS:ffff880001980000(0000)
knlGS:0000000000000000
[ 1.677059] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.677059] CR2: ffffc90001d66f98 CR3: 000000007fb7c000 CR4:
00000000000006e0
[ 1.677059] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 1.677059] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 1.677059] Process modprobe (pid: 234, veid=0, threadinfo
ffff88007f530000, task ffff8800fad6c800)
[ 1.677059] Stack:
[ 1.677059] ffffffff810805c9 ffffffff8165d0d8 0000000000000000
ffff88007f531ca8
[ 1.677059] <0> 0000000000000000 ffff88007f531d88 ffffffff81080595
0000000000000000
[ 1.677059] <0> ffffffff8107e406 000000057f529500 ffff88007f531f20
ffff88007f531f18
[ 1.677059] Call Trace:
[ 1.677059] [<ffffffff810805c9>] ? find_symbol_in_section+0x34/0xe3
[ 1.677059] [<ffffffff81080595>] ? find_symbol_in_section+0x0/0xe3
[ 1.677059] [<ffffffff8107e406>] ? each_symbol_in_section+0x31/0x6e
[ 1.677059] [<ffffffff8107fdc5>] ? each_symbol+0x4f/0x216
[ 1.677059] [<ffffffff81080595>] ? find_symbol_in_section+0x0/0xe3
[ 1.677059] [<ffffffff8107ffb4>] ? find_symbol+0x28/0x58
[ 1.677059] [<ffffffff81080101>] ? module_get_iter_tracepoints+0x89/0xa1
[ 1.677059] [<ffffffff810823d0>] ? load_module+0xafd/0x18be
[ 1.677059] [<ffffffff812ed395>] ? do_page_fault+0x2e0/0x2fc
[ 1.677059] [<ffffffff810831e6>] ? sys_init_module+0x55/0x21a
[ 1.677059] [<ffffffff81010c12>] ? system_call_fastpath+0x16/0x1b
[ 1.677059] Code: 00 75 f8 eb 10 49 ff c0 48 ff c1 4c 39 c2 75 08 c6
01 00 eb 0d 45 31 c0 42 8a 04 06 84 c0 88 01 75 e3 48 89 f8 c3 31 c0 8a
14 07 <3a> 14 06 74 06 19 c0 83 c8 01 c3 48 ff c0 84 d2 75 eb 31 c0 c3
[ 1.677059] RIP [<ffffffff8117ed09>] strcmp+0x5/0x1a
[ 1.677059] RSP <ffff88007f531b50>
[ 1.677059] CR2: ffffc90001d66f98
[ 1.677059] ---[ end trace 37ae4e9362bcf5df ]---
[ 70.600955] st0: Block limits 1 - 16777215 bytes.
[ 70.633669] BUG: unable to handle kernel NULL pointer dereference at
0000000000000110
[ 70.641047] IP: [<ffffffffa023667c>] st_ioctl+0x33f/0xecc [st]
[ 70.646903] PGD f9f98067 PUD f8c90067 PMD 0
[ 70.650600] Oops: 0002 [#1] SMP
[ 70.650600] last sysfs file: /sys/devices/virtual/net/lo/operstate
[ 70.663057] CPU 1
[ 70.663057] Modules linked in: snd_pcsp(-) usbserial snd_pcm
snd_timer snd soundcore snd_page_alloc
[ 70.663057] amd64_edac_mod i2c_amd756 edac_core edac_mce_amd pcspkr
i2c_core psmouse container serio_raw amd_rng evdev rng_core k8temp
shpchp pci_hotplug button processor reiserfs sha256_generic aes_x86_64
aes_generic cbc dm_crypt
[ 70.740576] dm_mod raid456 async_raid6_recov async_pq raid6_pq
async_xor xor async_memcpy async_tx raid1 md_mod osst st sd_mod
crc_t10dif usbhid hid sg sr_mod cdrom ata_generic pata_amd libata
ohci_hcd qla2xxx scsi_transport_fc thermal mptspi mptscsih ehci_hcd tg3
mptbase libphy aic7xxx scsi_transport_spi scsi_tgt thermal_sys floppy
usbcore nls_base scsi_mod [last unloaded: scsi_wait_scan]
[ 70.740576] Pid: 1181, comm: stinit Not tainted 2.6.32-5-openvz-amd64
#1 feoktistov Sun Fire V20z
[ 70.740576] RIP: 0010:[<ffffffffa023667c>] [<ffffffffa023667c>]
st_ioctl+0x33f/0xecc [st]
[ 70.740576] RSP: 0018:ffff8800f9339df8 EFLAGS: 00010293
[ 70.740576] RAX: 0000000000000110 RBX: 0000000000000000 RCX:
0000000000000000
[ 70.740576] RDX: ffff8800f81c9400 RSI: 0000000000000000 RDI:
ffff88007f7ff400
[ 70.740576] RBP: ffff88007f7ff400 R08: 0000000000000001 R09:
0000000000000000
[ 70.740576] R10: 0000000000000000 R11: 0000000000000246 R12:
0000000000000008
[ 70.740576] R13: 0000000000000001 R14: 0000000000000001 R15:
0000000000000000
[ 70.740576] FS: 00007fde95345700(0000) GS:ffff880001880000(0000)
knlGS:0000000000000000
[ 70.740576] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 70.740576] CR2: 0000000000000110 CR3: 00000000f858b000 CR4:
00000000000006e0
[ 70.740576] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 70.740576] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 70.740576] Process stinit (pid: 1181, veid=0, threadinfo
ffff8800f9338000, task ffff88007fb94800)
[ 70.740576] Stack:
[ 70.740576] ffff8800f9c21000 ffffffff810fb374 ffff88007f931000
00007fffad084850
[ 70.740576] <0> ffff8800f9719100 ffff88007f7ff410 0000000000000000
ffff8800f7c09c00
[ 70.740576] <0> 6020000000400018 0000000000000000 ffff8800f81c9200
ffff8800fb2dc5e8
[ 70.740576] Call Trace:
[ 70.740576] [<ffffffff810fb374>] ? do_filp_open+0x4de/0x8d0
[ 70.740576] [<ffffffff810fce46>] ? vfs_ioctl+0x21/0x6c
[ 70.740576] [<ffffffff810fd394>] ? do_vfs_ioctl+0x48d/0x4cb
[ 70.740576] [<ffffffff810ef6e7>] ? do_sys_open+0xec/0xfc
[ 70.740576] [<ffffffff810fd40f>] ? sys_ioctl+0x3d/0x5c
[ 70.740576] [<ffffffff81010c12>] ? system_call_fastpath+0x16/0x1b
[ 70.740576] Code: 7d 5b 00 74 1b 48 89 ef e8 8c dd ff ff 31 d2 85 c0
0f 49 d0 89 95 04 01 00 00 89 95 08 01 00 00 48 8b 45 08 80 a0 cd 00 00
00 7f <00> 00 00 00 22 20 6e c4 5e 00 00 00 04 30 00 00 ff ff ff ff 00
[ 70.740576] RIP [<ffffffffa023667c>] st_ioctl+0x33f/0xecc [st]
[ 70.740576] RSP <ffff8800f9339df8>
[ 70.740576] CR2: 0000000000000110
[ 71.005348] ---[ end trace 4b57ca744a198f4e ]---
[ 3.793151] BUG: unable to handle kernel NULL pointer dereference at
(null)
[ 3.793164] IP: [<ffffffffa01142d8>]
qla2x00_get_port_database+0x0/0x2df [qla2xxx]
[ 3.793195] PGD 0
[ 3.793201] Oops: 0002 [#1] SMP
[ 3.793207] last sysfs file: /sys/module/aic7xxx/initstate
[ 3.793216] CPU 2
[ 3.793220] Modules linked in: sg sr_mod cdrom ata_generic mptspi(+)
mptscsih ohci_hcd pata_amd mptbase ehci_hcd libata qla2xxx thermal
scsi_transport_fc aic7xxx(+) scsi_tgt scsi_transport_spi usbcore
nls_base tg3(+) libphy floppy thermal_sys scsi_mod
[ 3.793265] Pid: 297, comm: qla2xxx_2_dpc Not tainted
2.6.32-5-openvz-amd64 #1 feoktistov Sun Fire V20z
[ 3.793275] RIP: 0010:[<ffffffffa01142d8>] [<ffffffffa01142d8>]
qla2x00_get_port_database+0x0/0x2df [qla2xxx]
[ 3.793299] RSP: 0018:ffff88007f8f7cc8 EFLAGS: 00010246
[ 3.793307] RAX: 0000000000000000 RBX: ffff8800fadb6db0 RCX:
ffff8800fadb0075
[ 3.793315] RDX: 0000000000000000 RSI: ffff8800f8273cc0 RDI:
ffff8800fadb6da0
[ 3.793323] RBP: ffff8800fadb6da0 R08: 00000000000080d0 R09:
ffff8800f819b480
[ 3.793331] R10: ffff880001911220 R11: ffff880001916940 R12:
0000000000000000
[ 3.793339] R13: ffff8800f8273cc0 R14: 0000000000000000 R15:
ffff88007f408000
[ 3.793349] FS: 00007f1da913d7a0(0000) GS:ffff880001900000(0000)
knlGS:0000000000000000
[ 3.793358] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[ 3.793365] CR2: 0000000000000000 CR3: 00000000f82c6000 CR4:
00000000000006e0
[ 3.793374] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 3.793382] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 3.793392] Process qla2xxx_2_dpc (pid: 297, veid=0, threadinfo
ffff88007f8f6000, task ffff88007f522800)
[ 3.793401] Stack:
[ 3.793405] ffffffffa010d34e ffff88007f8f7e06 ffffffffa0111065
0000000000000286
[ 3.793415] <0> ffff8800fadb6da0 0100000000000000 ffff8800fadb5270
ffff8800fadb5040
[ 3.793425] <0> 00220001fadb5270 ffff8800fadb5040 ffff8800fadb6e00
00000000000112e0
[ 3.793437] Call Trace:
[ 3.793454] [<ffffffffa010d34e>] ?
qla2x00_configure_loop+0x56a/0x141e [qla2xxx]
[ 3.793473] [<ffffffffa0111065>] ?
qla2x00_mailbox_command+0x52a/0x583 [qla2xxx]
[ 3.793493] [<ffffffffa0112ce5>] ? qla2x00_get_retry_cnt+0x43/0xbd
[qla2xxx]
[ 3.793512] [<ffffffffa0115365>] ? __qla2x00_marker+0x44/0x34a [qla2xxx]
[ 3.793529] [<ffffffffa010b596>] ? qla2x00_fw_ready+0x172/0x285
[qla2xxx]
[ 3.793546] [<ffffffffa010e29e>] ? qla2x00_loop_resync+0x9c/0xf6
[qla2xxx]
[ 3.793563] [<ffffffffa01096e8>] ? qla2x00_do_dpc+0x20c/0x2d8 [qla2xxx]
[ 3.793579] [<ffffffffa01094dc>] ? qla2x00_do_dpc+0x0/0x2d8 [qla2xxx]
[ 3.793593] [<ffffffff81066566>] ? kthread+0xc0/0xca
[ 3.793605] [<ffffffff81011c6a>] ? child_rip+0xa/0x20
[ 3.793614] [<ffffffff810664a6>] ? kthread+0x0/0xca
[ 3.793622] [<ffffffff81011c60>] ? child_rip+0x0/0x20
[ 3.793628] Code: 00 00 40 b3 12 a0 00 00 00 fe f0 12 a0 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 b7 4b 1d e1 00 00 00 00 00 00 00 00 00
00 00 <00> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 3.793678] RIP [<ffffffffa01142d8>]
qla2x00_get_port_database+0x0/0x2df [qla2xxx]
[ 3.793698] RSP <ffff88007f8f7cc8>
[ 3.793703] CR2: 0000000000000000
[ 3.793710] ---[ end trace acfb24e32a5ec9e8 ]---
-- Package-specific info:
** Version:
Linux version 2.6.32-5-openvz-amd64 (Debian 2.6.32-31)
(ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon
Mar 7 22:25:57 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-openvz-amd64
root=/dev/mapper/guisborough--1-root ro console=tty0
console=ttyS0,115200n8 clocksource=hpet rootdelay=5 memtest=1
** Not tainted
** Kernel log:
[ 0.000000] Linux version 2.6.32-5-openvz-amd64 (Debian 2.6.32-31)
(ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon
Mar 7 22:25:57 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-openvz-amd64
root=/dev/mapper/guisborough--1-root ro console=tty0
console=ttyS0,115200n8 clocksource=hpet rootdelay=5 memtest=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a000 (usable)
[ 0.000000] BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000cc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000fbf70000 (usable)
[ 0.000000] BIOS-e820: 00000000fbf70000 - 00000000fbf77000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fbf77000 - 00000000fbf80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fbf80000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working
around it.
[ 0.000000] last_pfn = 0xfbf70 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-00000000fbf70000
[ 0.000000] RAMDISK: 37501000 - 37fef01a
[ 0.000000] ACPI: RSDP 00000000000f7da0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000fbf74740 00064 (v01 PTLTD ? XSDT
06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000fbf76780 000F4 (v03 SUN V20z
06040000 PTEC 000F4240)
[ 0.000000] ACPI: DSDT 00000000fbf747a4 01F68 (v01 Sun V20z
06040000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000fbf7ffc0 00040
[ 0.000000] ACPI: HPET 00000000fbf76874 00038 (v01 Sun V20z
06040000 PTEC 00000000)
[ 0.000000] ACPI: APIC 00000000fbf768ac 00092 (v01 PTLTD ? APIC
06040000 LTP 00000000)
[ 0.000000] ACPI: SPCR 00000000fbf7693e 00050 (v01 PTLTD $UCRTBL$
06040000 PTL 00000001)
[ 0.000000] ACPI: SSDT 00000000fbf7698e 00478 (v01 PTLTD POWERNOW
06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000fbf76e06 0009D (v01 SUN V20z
06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000fbf76ea3 0009D (v01 SUN V20z
06040000 LTP 00000001)
[ 0.000000] ACPI: SRAT 00000000fbf76f40 000C0 (v01 SUN V20z
06040000 SUN 00000001)
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-fc000000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000fbf70000
[ 0.000000] NODE_DATA [0000000000015fc0 - 000000000001dfbf]
[ 0.000000] bootmap [000000000001e000 - 000000000003d7ef] pages 20
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00fbf70000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000167ec54] TEXT DATA BSS ==>
[0001000000 - 000167ec54]
[ 0.000000] #3 [0037501000 - 0037fef01a] RAMDISK ==>
[0037501000 - 0037fef01a]
[ 0.000000] #4 [000009a000 - 0000100000] BIOS reserved ==>
[000009a000 - 0000100000]
[ 0.000000] #5 [000167f000 - 000167f108] BRK ==>
[000167f000 - 000167f108]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==>
[0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000015fc0] MEMNODEMAP ==>
[0000014000 - 0000015fc0]
[ 0.000000] found SMP MP-table at [ffff8800000f7dd0] f7dd0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x000fbf70
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfc800000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 17, address 0xfc800000, GSI
24-27
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfc801000] gsi_base[28])
[ 0.000000] IOAPIC[2]: apic_id 6, version 17, address 0xfc801000, GSI
28-31
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x102282a0 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009a000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000cc000
[ 0.000000] PM: Registered nosave memory: 00000000000cc000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at fc000000 (gap:
fc000000:2c00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:2
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff880001800000 s94872
r8192 d23912 u524288
[ 0.000000] pcpu-alloc: s94872 r8192 d23912 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1015694
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-openvz-amd64
root=/dev/mapper/guisborough--1-root ro console=tty0
console=ttyS0,115200n8 clocksource=hpet rootdelay=5 memtest=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Memory: 4043504k/4128192k available (3011k kernel code,
472k absent, 84216k reserved, 1935k data, 596k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=4, Nodes=2
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:576
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2592.834 MHz processor.
[ 0.012007] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5185.66 BogoMIPS (lpj=10371336)
[ 0.024356] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.034310] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.037257] Mount-cache hash table entries: 256
[ 0.040196] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.044004] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.048004] CPU 0/0x0 -> Node 0
[ 0.052006] CPU: Physical Processor ID: 0
[ 0.056003] CPU: Processor Core ID: 0
[ 0.060004] mce: CPU supports 5 MCE banks
[ 0.064012] Performance Events: AMD PMU driver.
[ 0.072005] ... version: 0
[ 0.076003] ... bit width: 48
[ 0.080003] ... generic registers: 4
[ 0.084003] ... value mask: 0000ffffffffffff
[ 0.088003] ... max period: 00007fffffffffff
[ 0.092003] ... fixed-purpose events: 0
[ 0.096003] ... event mask: 000000000000000f
[ 0.100606] ACPI: Core revision 20090903
[ 0.108679] Page beancounter hash is 262144 entries.
[ 0.113747] Setting APIC routing to flat
[ 0.116323] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.161759] CPU0: Dual Core AMD Opteron(tm) Processor 285 stepping 02
[ 0.172001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.016000] Initializing CPU#1
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.016000] CPU 1/0x1 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 0
[ 0.016000] CPU: Processor Core ID: 1
[ 0.264122] CPU1: Dual Core AMD Opteron(tm) Processor 285 stepping 02
[ 0.273464] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.016000] Initializing CPU#2
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.016000] CPU 2/0x2 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 0
[ 0.368108] CPU2: Dual Core AMD Opteron(tm) Processor 285 stepping 02
[ 0.377465] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.016000] Initializing CPU#3
[ 0.016000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.016000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.016000] CPU 3/0x3 -> Node 0
[ 0.016000] CPU: Physical Processor ID: 1
[ 0.016000] CPU: Processor Core ID: 1
[ 0.472114] CPU3: Dual Core AMD Opteron(tm) Processor 285 stepping 02
[ 0.481402] Brought up 4 CPUs
[ 0.484003] Total of 4 processors activated (20741.35 BogoMIPS).
[ 0.494713] regulator: core version 0.5
[ 0.496057] NET: Registered protocol family 16
[ 0.500107] TOM: 00000000fc000000 aka 4032M
[ 0.508039] ACPI: bus type pci registered
[ 0.512052] PCI: Using configuration type 1 for base access
[ 0.516346] bio: create slab <bio-0> at 0
[ 0.525510] ACPI: Interpreter enabled
[ 0.528004] ACPI: (supports S0 S1 S5)
[ 0.533110] ACPI: Using IOAPIC for interrupt routing
[ 0.540571] ACPI: No dock devices found.
[ 0.544076] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.548836] pci 0000:02:02.0: PME# supported from D3hot D3cold
[ 0.556005] pci 0000:02:02.0: PME# disabled
[ 0.560065] pci 0000:02:02.1: PME# supported from D3hot D3cold
[ 0.564004] pci 0000:02:02.1: PME# disabled
[ 0.577762] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *10 11)
[ 0.584143] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11)
[ 0.589896] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 5 10 11)
[ 0.597309] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
[ 0.601862] vgaarb: device added:
PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.612006] vgaarb: loaded
[ 0.614886] PCI: Using ACPI for IRQ routing
[ 0.616144] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.624012] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.632333] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.652042] Switching to clocksource hpet
[ 0.657445] pnp: PnP ACPI init
[ 0.660737] ACPI: bus type pnp registered
[ 0.665138] pnp 00:00: mem resource (0xe0000-0xfffff) overlaps
0000:02:04.0 BAR 6 (0x0-0xfffff), disabling
[ 0.675138] pnp 00:00: mem resource (0xc0000-0xc7fff) overlaps
0000:02:04.0 BAR 6 (0x0-0xfffff), disabling
[ 0.686799] pnp: PnP ACPI: found 14 devices
[ 0.691189] ACPI: ACPI bus type pnp unregistered
[ 0.696029] system 00:00: iomem range 0xfec00000-0xfec00fff could not
be reserved
[ 0.703832] system 00:00: iomem range 0xffc00000-0xfff7ffff has been
reserved
[ 0.711198] system 00:00: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.718563] system 00:00: iomem range 0xfff80000-0xffffffff has been
reserved
[ 0.725933] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.732506] system 00:09: ioport range 0x1100-0x117f has been reserved
[ 0.739256] system 00:09: ioport range 0x1180-0x11ff has been reserved
[ 0.746007] system 00:09: ioport range 0xca2-0xca3 has been reserved
[ 0.752591] system 00:09: ioport range 0xb78-0xb7b has been reserved
[ 0.759168] system 00:09: ioport range 0x190-0x193 has been reserved
[ 0.765745] system 00:09: ioport range 0x290-0x291 has been reserved
[ 0.777196] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[ 0.783341] pci 0000:00:06.0: IO window: disabled
[ 0.797886] pci 0000:00:06.0: MEM window: 0xfc900000-0xfdffffff
[ 0.804211] pci 0000:00:06.0: PREFETCH window: 0xfc000000-0xfc0fffff
[ 0.810967] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[ 0.817107] pci 0000:00:0a.0: IO window: 0x2000-0x2fff
[ 0.822628] pci 0000:00:0a.0: MEM window: 0xfe000000-0xfe0fffff
[ 0.828938] pci 0000:00:0a.0: PREFETCH window: 0xfc100000-0xfc2fffff
[ 0.835693] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
[ 0.841830] pci 0000:00:0b.0: IO window: 0x3000-0x3fff
[ 0.847349] pci 0000:00:0b.0: MEM window: 0xfe100000-0xfe1fffff
[ 0.853669] pci 0000:00:0b.0: PREFETCH window: 0xfc300000-0xfc3fffff
[ 0.860524] NET: Registered protocol family 2
[ 0.865297] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.874714] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.888539] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.896299] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.903155] TCP reno registered
[ 0.906640] NET: Registered protocol family 1
[ 0.911233] pci 0000:00:07.3: boot interrupts on device [1022:746b]
already disabled
[ 0.919300] pci 0000:00:0a.0: MSI quirk detected; subordinate MSI
disabled
[ 0.926406] pci 0000:00:0a.0: disabled boot interrupts on device
[1022:7450]
[ 0.933695] pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling
PCI-X MMRBC
[ 0.940973] pci 0000:00:0b.0: MSI quirk detected; subordinate MSI
disabled
[ 0.948087] pci 0000:00:0b.0: disabled boot interrupts on device
[1022:7450]
[ 0.955363] pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling
PCI-X MMRBC
[ 1.385129] Unpacking initramfs...
[ 1.626096] Freeing initrd memory: 11192k freed
[ 1.641504] agpgart-amd64 0000:01:05.0: AGP bridge [1023/9880]
[ 1.647556] agpgart-amd64 0000:01:05.0: aperture size 4096 MB is not
right, using settings from NB
[ 1.656836] agpgart-amd64 0000:01:05.0: aperture from AGP @
fc920000fd800000 size 32 MB
[ 1.665154] Aperture beyond 4GB. Ignoring.
[ 1.669444] pci 0000:00:18.3: no usable aperture found
[ 1.674786] pci 0000:00:18.3: consider rebooting with iommu=memaper=2
to get a good aperture
[ 1.684672] audit: initializing netlink socket (disabled)
[ 1.690307] type=2000 audit(1303595112.688:1): initialized
[ 1.698750] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.707436] VFS: Disk quotas dquot_6.5.2
[ 1.711605] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.718363] msgmni has been set to 7919
[ 1.722798] alg: No test for stdrng (krng)
[ 1.727145] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.734857] io scheduler noop registered
[ 1.738972] io scheduler anticipatory registered
[ 1.743790] io scheduler deadline registered
[ 1.748320] io scheduler cfq registered (default)
[ 1.754732] Linux agpgart interface v0.103
[ 1.759070] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.778093] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 1.786211] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 1.796518] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.801701] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.807044] mice: PS/2 mouse device common for all mice
[ 1.812568] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.818909] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.825852] cpuidle: using governor ladder
[ 1.830150] cpuidle: using governor menu
[ 1.834269] No iBFT detected.
[ 1.837797] TCP cubic registered
[ 1.841309] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 1.841380] NET: Registered protocol family 10
[ 1.842209] Mobile IPv6
[ 1.842213] NET: Registered protocol family 17
[ 1.842320] registered taskstats version 1
[ 1.866425] rtc_cmos 00:06: setting system clock to 2011-04-23
21:45:14 UTC (1303595114)
[ 1.874885] Initalizing network drop monitor service
[ 1.880120] Freeing unused kernel memory: 596k freed
[ 1.885686] Write protecting the kernel read-only data: 4148k
[ 1.981684] SCSI subsystem initialized
[ 1.990211] usbcore: registered new interface driver usbfs
[ 1.995065] Floppy drive(s): fd0 is 1.44M
[ 2.000752] usbcore: registered new interface driver hub
[ 2.008586] usbcore: registered new device driver usb
[ 2.013562] FDC 0 is a post-1991 82077
[ 2.018459] aic7xxx 0000:02:05.0: PCI INT A -> GSI 24 (level, low) ->
IRQ 24
[ 2.029325] QLogic Fibre Channel HBA Driver: 8.03.01-k6
[ 2.031122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.038702] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.084700] Fusion MPT base driver 3.04.12
[ 2.089258] Copyright (c) 1999-2008 LSI Corporation
[ 2.101040] Fusion MPT SPI Host driver 3.04.12
[ 2.236039] qla2xxx 0000:03:01.0: PCI INT A -> GSI 28 (level, low) ->
IRQ 28
[ 2.243767] ohci_hcd 0000:01:00.0: PCI INT D -> GSI 19 (level, low)
-> IRQ 19
[ 2.251710] qla2xxx 0000:03:01.0: Found an ISP2312, irq 28, iobase
0xffffc90001530000
[ 2.260364] scsi0 : pata_amd
[ 2.263697] ohci_hcd 0000:01:00.0: OHCI Host Controller
[ 2.269480] scsi1 : pata_amd
[ 2.272769] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000
irq 14
[ 2.280418] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1008
irq 15
[ 2.288096] ohci_hcd 0000:01:00.0: new USB bus registered, assigned
bus number 1
[ 2.296455] ohci_hcd 0000:01:00.0: irq 19, io mem 0xfc900000
[ 2.302703] qla2xxx 0000:03:01.0: Configuring PCI space...
[ 2.308939] qla2xxx 0000:03:01.0: Configure NVRAM parameters...
[ 2.403711] qla2xxx 0000:03:01.0: Verifying loaded RISC code...
[ 2.412310] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.419745] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.427770] usb usb1: Product: OHCI Host Controller
[ 2.433207] usb usb1: Manufacturer: Linux 2.6.32-5-openvz-amd64 ohci_hcd
[ 2.440557] usb usb1: SerialNumber: 0000:01:00.0
[ 2.445752] usb usb1: configuration #1 chosen from 1 choice
[ 2.451951] hub 1-0:1.0: USB hub found
[ 2.456155] hub 1-0:1.0: 3 ports detected
[ 2.457503] ata2.00: ATAPI: CD-224E, 1.9A, max UDMA/33
[ 2.466431] ohci_hcd 0000:01:00.1: PCI INT D -> GSI 19 (level, low)
-> IRQ 19
[ 2.474405] ohci_hcd 0000:01:00.1: OHCI Host Controller
[ 2.477330] ata2.00: configured for UDMA/33
[ 2.481138] scsi 1:0:0:0: CD-ROM TEAC CD-224E
1.9A PQ: 0 ANSI: 5
[ 2.493669] qla2xxx 0000:03:01.0: firmware: requesting ql2300_fw.bin
[ 2.494097] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 2.494103] Uniform CD-ROM driver Revision: 3.20
[ 2.498582] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 2.518257] ohci_hcd 0000:01:00.1: new USB bus registered, assigned
bus number 2
[ 2.526456] ohci_hcd 0000:01:00.1: irq 19, io mem 0xfc901000
[ 2.594034] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.601479] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.609495] usb usb2: Product: OHCI Host Controller
[ 2.614914] usb usb2: Manufacturer: Linux 2.6.32-5-openvz-amd64 ohci_hcd
[ 2.622309] usb usb2: SerialNumber: 0000:01:00.1
[ 2.627504] usb usb2: configuration #1 chosen from 1 choice
[ 2.633697] hub 2-0:1.0: USB hub found
[ 2.637879] hub 2-0:1.0: 3 ports detected
[ 2.660062] qla2xxx 0000:03:01.0: Allocated (412 KB) for firmware dump...
[ 2.808097] scsi2 : qla2xxx
[ 2.811504] qla2xxx 0000:03:01.0:
[ 2.811506] QLogic Fibre Channel HBA Driver: 8.03.01-k6
[ 2.811508] QLogic QLA2342 - 133MHz PCI-X to 2Gb FC, Dual Channel
[ 2.811510] ISP2312: PCI-X (133 MHz) @ 0000:03:01.0 hdma-, host#=2,
fw=3.03.27 IPX
[ 2.836780] qla2xxx 0000:03:01.1: PCI INT B -> GSI 29 (level, low) ->
IRQ 29
[ 2.844492] qla2xxx 0000:03:01.1: Found an ISP2312, irq 29, iobase
0xffffc900015f4000
[ 2.845028] usb 1-1: new full speed USB device using ohci_hcd and
address 2
[ 2.861041] qla2xxx 0000:03:01.1: Configuring PCI space...
[ 2.867258] qla2xxx 0000:03:01.1: Configure NVRAM parameters...
[ 2.962041] qla2xxx 0000:03:01.1: Verifying loaded RISC code...
[ 3.055214] usb 1-1: New USB device found, idVendor=050d, idProduct=0237
[ 3.062430] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 3.070099] usb 1-1: Product: USB 2.0 Hub [MTT]
[ 3.075114] usb 1-1: configuration #1 chosen from 1 choice
[ 3.076096] qla2xxx 0000:03:01.1: Allocated (412 KB) for firmware dump...
[ 3.090239] hub 1-1:1.0: USB hub found
[ 3.096203] hub 1-1:1.0: 7 ports detected
[ 3.220074] scsi4 : qla2xxx
[ 3.223469] qla2xxx 0000:03:01.1:
[ 3.223470] QLogic Fibre Channel HBA Driver: 8.03.01-k6
[ 3.223473] QLogic QLA2342 - 133MHz PCI-X to 2Gb FC, Dual Channel
[ 3.223475] ISP2312: PCI-X (133 MHz) @ 0000:03:01.1 hdma-, host#=4,
fw=3.03.27 IPX
[ 3.427149] usb 1-1.1: new low speed USB device using ohci_hcd and
address 3
[ 3.484468] qla2xxx 0000:03:01.0: LIP reset occurred (f810).
[ 3.524041] qla2xxx 0000:03:01.0: LIP occurred (f810).
[ 3.529608] qla2xxx 0000:03:01.0: LOOP UP detected (1 Gbps).
[ 3.538883] scsi 2:0:0:0: Direct-Access SEAGATE STT34007 CLAR400
C003 PQ: 0 ANSI: 3
[ 3.548973] scsi 2:0:1:0: Direct-Access SEAGATE STT34007 CLAR400
C003 PQ: 0 ANSI: 3
[ 3.558905] scsi 2:0:2:0: Direct-Access SEAGATE STT34007 CLAR400
C003 PQ: 0 ANSI: 3
[ 3.568916] scsi 2:0:3:0: Direct-Access SEAGATE STT34007 CLAR400
C003 PQ: 0 ANSI: 3
[ 3.578852] scsi 2:0:4:0: Direct-Access SEAGATE STT34007 CLAR400
C003 PQ: 0 ANSI: 3
[ 3.588052] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 3.603922] sd 2:0:1:0: Attached scsi generic sg2 type 0
[ 3.604200] sd 2:0:0:0: [sda] 781250000 512-byte logical blocks: (400
GB/372 GiB)
[ 3.604929] sd 2:0:1:0: [sdb] 781250000 512-byte logical blocks: (400
GB/372 GiB)
[ 3.605131] usb 1-1.1: New USB device found, idVendor=051d,
idProduct=0002
[ 3.605135] usb 1-1.1: New USB device strings: Mfr=3, Product=1,
SerialNumber=2
[ 3.605138] usb 1-1.1: Product: Back-UPS BR 800 FW:9.o5 .I USB FW:o5
[ 3.605141] usb 1-1.1: Manufacturer: American Power Conversion
[ 3.605150] usb 1-1.1: SerialNumber: 5B1026T18272
[ 3.605236] usb 1-1.1: configuration #1 chosen from 1 choice
[ 3.605289] sd 2:0:0:0: [sda] Write Protect is off
[ 3.605909] sd 2:0:1:0: [sdb] Write Protect is off
[ 3.607557] sd 2:0:0:0: [sda] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 3.607643] sd 2:0:1:0: [sdb] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 3.610777] sda:
[ 3.610892] sdb: sdb1 sdb2
[ 3.700308] sda1
[ 3.700425] sd 2:0:2:0: Attached scsi generic sg3 type 0
[ 3.700569] sd 2:0:3:0: Attached scsi generic sg4 type 0
[ 3.700715] sd 2:0:4:0: Attached scsi generic sg5 type 0
[ 3.719799] sda2
[ 3.724528] sd 2:0:3:0: [sdd] 781250000 512-byte logical blocks: (400
GB/372 GiB)
[ 3.725879] sd 2:0:2:0: [sdc] 781250000 512-byte logical blocks: (400
GB/372 GiB)
[ 3.726048] sd 2:0:4:0: [sde] 781250000 512-byte logical blocks: (400
GB/372 GiB)
[ 3.726841] sd 2:0:2:0: [sdc] Write Protect is off
[ 3.727001] sd 2:0:4:0: [sde] Write Protect is off
[ 3.727485] sd 2:0:0:0: [sda] Attached SCSI disk
[ 3.728418] sd 2:0:2:0: [sdc] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 3.728620] sd 2:0:4:0: [sde] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 3.729982] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 3.731602] sdc:
[ 3.731805] sde: sdc1 sdc2
[ 3.794279] sde1 sde2
[ 3.798072] sd 2:0:3:0: [sdd] Write Protect is off
[ 3.805102] usb 1-1.3: new full speed USB device using ohci_hcd and
address 4
[ 3.812868] sd 2:0:3:0: [sdd] Write cache: disabled, read cache:
enabled, supports DPO and FUA
[ 3.812887] sd 2:0:2:0: [sdc] Attached SCSI disk
[ 3.814856] sd 2:0:4:0: [sde] Attached SCSI disk
[ 3.835351] sdd: sdd1 sdd2
[ 3.843165] sd 2:0:3:0: [sdd] Attached SCSI disk
[ 3.851612] usbcore: registered new interface driver hiddev
[ 3.918070] usb 1-1.3: New USB device found, idVendor=1a86,
idProduct=7523
[ 3.925458] usb 1-1.3: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[ 3.933318] usb 1-1.3: Product: USB2.0-Ser!
[ 3.937948] usb 1-1.3: configuration #1 chosen from 1 choice
[ 4.175102] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID
v1.10 Device [American Power Conversion Back-UPS BR 800 FW:9.o5 .I USB
FW:o5 ] on usb-0000:01:00.0-1.1/input0
[ 4.192398] usbcore: registered new interface driver usbhid
[ 4.198419] usbhid: v2.6:USB HID core driver
[ 17.476028] scsi3 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 17.476031] <Adaptec 3960D Ultra160 SCSI adapter>
[ 17.476033] aic7899: Ultra160 Wide Channel A, SCSI Id=7,
32/253 SCBs
[ 17.476035]
[ 17.499228] tg3.c:v3.102 (September 1, 2009)
[ 17.503986] tg3 0000:02:02.0: PCI INT A -> GSI 25 (level, low) -> IRQ 25
[ 17.547784] eth0: Tigon3 [partno(BCM95704A6) rev 2003]
(PCI:66MHz:64-bit) MAC address 00:09:3d:12:ee:ac
[ 17.558157] eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet)
(WireSpeed[1])
[ 17.566556] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 17.573581] eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 17.579448] mptspi 0000:02:04.0: PCI INT A -> GSI 27 (level, low) ->
IRQ 27
[ 17.587201] mptbase: ioc0: Initiating bringup
[ 18.096018] ioc0: LSI53C1030 C0: Capabilities={Initiator}
[ 18.965402] scsi5 : ioc0: LSI53C1030 C0, FwRev=01032920h, Ports=1,
MaxQ=222, IRQ=27
[ 19.346902] aic7xxx 0000:02:05.1: PCI INT B -> GSI 25 (level, low) ->
IRQ 25
[ 25.380078] qla2xxx 0000:03:01.1: Cable is unplugged...
[ 34.568037] scsi6 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 34.568039] <Adaptec 3960D Ultra160 SCSI adapter>
[ 34.568041] aic7899: Ultra160 Wide Channel B, SCSI Id=7,
32/253 SCBs
[ 34.568043]
[ 34.591193] tg3 0000:02:02.1: PCI INT B -> GSI 26 (level, low) -> IRQ 26
[ 34.646591] eth1: Tigon3 [partno(BCM95704A6) rev 2003]
(PCI:66MHz:64-bit) MAC address 00:09:3d:12:ee:ad
[ 34.656937] eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet)
(WireSpeed[1])
[ 34.665344] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 34.672337] eth1: dma_rwctrl[763f0000] dma_mask[64-bit]
[ 35.368693] scsi 6:0:3:0: Sequential-Access IBM ULTRIUM-TD2
3AYC PQ: 0 ANSI: 3
[ 35.377490] scsi target6:0:3: Beginning Domain Validation
[ 35.406043] scsi target6:0:3: wide asynchronous
[ 35.429429] scsi target6:0:3: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5
ns, offset 31)
[ 35.528050] scsi target6:0:3: Ending Domain Validation
[ 38.355020] scsi 6:0:3:0: Attached scsi generic sg6 type 1
[ 38.360452] st: Version 20081215, fixed bufsize 32768, s/g segs 256
[ 38.360726] st 6:0:3:0: Attached scsi tape st0
[ 38.360730] st 6:0:3:0: st0: try direct i/o: yes (alignment 4 B)
[ 38.363478] osst :I: Tape driver with OnStream support version 0.99.4
[ 38.363481] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 39.746580] md: raid1 personality registered for level 1
[ 39.755117] async_tx: api initialized (async)
[ 39.760624] xor: automatically using best checksumming function:
generic_sse
[ 39.788511] generic_sse: 8109.000 MB/sec
[ 39.793276] xor: using function: generic_sse (8109.000 MB/sec)
[ 39.868525] raid6: int64x1 2393 MB/s
[ 39.940523] raid6: int64x2 3070 MB/s
[ 40.012529] raid6: int64x4 2413 MB/s
[ 40.084523] raid6: int64x8 2138 MB/s
[ 40.156595] raid6: sse2x1 721 MB/s
[ 40.228524] raid6: sse2x2 1296 MB/s
[ 40.300535] raid6: sse2x4 2376 MB/s
[ 40.304732] raid6: using algorithm sse2x4 (2376 MB/s)
[ 40.314995] md: raid6 personality registered for level 6
[ 40.320884] md: raid5 personality registered for level 5
[ 40.326743] md: raid4 personality registered for level 4
[ 40.380186] md: md1 stopped.
[ 40.388195] md: bind<sdd1>
[ 40.391536] md: bind<sdc1>
[ 40.394892] md: bind<sdb1>
[ 40.398273] md: bind<sda1>
[ 40.401596] md: bind<sde1>
[ 40.405985] raid1: raid set md1 active with 5 out of 5 mirrors
[ 40.412480] md1: detected capacity change from 0 to 1052704768
** Model information
sys_vendor: Sun Microsystems
product_name: Sun Fire V20z
product_version: 00
chassis_vendor: NEWISYS
chassis_version:
bios_vendor: Phoenix Technologies Ltd.
bios_version: V1.35.5.1
board_vendor: NEWISYS
board_name: Stinger
board_version: r09
** Loaded modules:
Module Size Used by
vzethdev 7301 0
vznetdev 17967 14
simfs 3087 7
vzrst 110398 0
vzcpt 97042 0
vzdquota 35158 7 [permanent]
vzmon 16317 11 vzethdev,vznetdev,vzrst,vzcpt
vzdev 1824 4 vzethdev,vznetdev,vzdquota,vzmon
ip6t_frag 1198 3
xt_DSCP 2453 0
xt_owner 1909 4
xt_length 1164 0
xt_hl 1313 0
xt_tcpmss 1401 0
xt_dscp 1805 0
vzevent 1723 1
nfsd 255806 13
exportfs 3330 1 nfsd
bridge 40774 0
ipt_MASQUERADE 1213 24
iptable_nat 4363 2
nf_nat 13546 2 ipt_MASQUERADE,iptable_nat
sit 9258 0
iptable_mangle 2881 0
tunnel4 1973 1 sit
ipt_LOG 4758 15
ipt_REJECT 1953 13
xt_TCPMSS 2935 1
xt_physdev 1508 2
nf_conntrack_ipv4 10143 19 iptable_nat,nf_nat
nf_defrag_ipv4 1155 1 nf_conntrack_ipv4
ip6table_mangle 3167 0
xt_state 1303 16
ip6t_LOG 4618 6
xt_limit 1782 9
xt_tcpudp 2319 88
nf_conntrack 47155 4
iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
ip6t_REJECT 2580 15
xt_hashlimit 8503 3
xt_multiport 2267 31
ip6table_filter 2448 5
ip6_tables 15267 4
ip6t_frag,ip6table_mangle,ip6t_LOG,ip6table_filter
iptable_filter 2322 4
ip_tables 14107 3 iptable_nat,iptable_mangle,iptable_filter
x_tables 13213 22
ip6t_frag,xt_DSCP,xt_owner,xt_length,xt_hl,xt_tcpmss,xt_dscp,ipt_MASQUERADE,iptable_nat,ipt_LOG,ipt_REJECT,xt_TCPMSS,xt_physdev,xt_state,ip6t_LOG,xt_limit,xt_tcpudp,ip6t_REJECT,xt_hashlimit,xt_multiport,ip6_tables,ip_tables
act_police 3636 3
sch_ingress 1624 1
cls_u32 5466 12
sch_sfq 4686 5
sch_htb 11942 1
nfs 244106 2
lockd 59116 2 nfsd,nfs
fscache 29850 1 nfs
nfs_acl 2031 2 nfsd,nfs
auth_rpcgss 33476 2 nfsd,nfs
sunrpc 165125 24 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
8021q 17902 0
garp 5050 1 8021q
stp 1440 2 bridge,garp
powernow_k8 10978 2
ipmi_si 30976 0
ipmi_devintf 6603 0
ipmi_msghandler 26634 2 ipmi_si,ipmi_devintf
loop 11751 0
ch341 7652 1
usbserial 27692 3 ch341
snd_pcm 60519 0
snd_timer 15598 1 snd_pcm
snd 46494 2 snd_pcm,snd_timer
i2c_amd756 4321 0
i2c_core 15819 1 i2c_amd756
soundcore 4598 1 snd
snd_page_alloc 6265 1 snd_pcm
amd_rng 1437 0
amd64_edac_mod 13806 0
evdev 7368 4
psmouse 49937 0
container 2389 0
edac_core 29245 4 amd64_edac_mod
rng_core 3006 2 amd_rng
serio_raw 3768 0
pcspkr 1699 0
edac_mce_amd 6433 1 amd64_edac_mod
k8temp 3283 0
shpchp 26248 0
pci_hotplug 21219 1 shpchp
button 4682 0
processor 29999 1 powernow_k8
reiserfs 194036 7
sha256_generic 8692 2
aes_x86_64 7340 2
aes_generic 25714 1 aes_x86_64
cbc 2539 1
dm_crypt 10664 1
dm_mod 53738 26 dm_crypt
raid456 44500 1
async_raid6_recov 5106 1 raid456
async_pq 3431 2 raid456,async_raid6_recov
raid6_pq 77179 2 async_raid6_recov,async_pq
async_xor 2446 3 raid456,async_raid6_recov,async_pq
xor 4380 1 async_xor
async_memcpy 1182 2 raid456,async_raid6_recov
async_tx 1750 5
raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid1 18319 1
md_mod 73680 4 raid456,raid1
sd_mod 29889 15
crc_t10dif 1276 1 sd_mod
usbhid 33308 1
hid 63305 1 usbhid
sg 18712 0
sr_mod 12682 0
cdrom 29415 1 sr_mod
ata_generic 3047 0
ohci_hcd 19343 0
ehci_hcd 32097 0
mptspi 11185 0
mptscsih 16360 1 mptspi
mptbase 48382 2 mptspi,mptscsih
pata_amd 9869 0
tg3 95663 0
libata 133568 2 ata_generic,pata_amd
aic7xxx 107139 0
scsi_transport_spi 18774 2 mptspi,aic7xxx
qla2xxx 203109 10
scsi_transport_fc 35355 1 qla2xxx
scsi_tgt 8498 1 scsi_transport_fc
floppy 49055 0
usbcore 122546 7 ch341,usbserial,usbhid,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
scsi_mod 122181 11
sd_mod,sg,sr_mod,mptspi,mptscsih,libata,aic7xxx,scsi_transport_spi,qla2xxx,scsi_transport_fc,scsi_tgt
libphy 14054 1 tg3
thermal 11754 0
thermal_sys 11942 2 processor,thermal
** PCI devices:
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8111 PCI
[1022:7460] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 123
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
Memory behind bridge: fc900000-fdffffff
Prefetchable memory behind bridge: fc000000-fc0fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:07.0 ISA bridge [0601]: Advanced Micro Devices [AMD] AMD-8111 LPC
[1022:7468] (rev 05)
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Advanced Micro Devices [AMD] AMD-8111 IDE
[1022:7469] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 1000 [size=16]
Kernel driver in use: pata_amd
Kernel modules: pata_amd, ata_generic
00:07.3 Bridge [0680]: Advanced Micro Devices [AMD] AMD-8111 ACPI
[1022:746b] (rev 05)
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd756_smbus
Kernel modules: i2c-amd756, amd-rng
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X
Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe000000-fe0fffff
Prefetchable memory behind bridge: 00000000fc100000-00000000fc2fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:0a.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc800000 (64-bit, non-prefetchable) [size=4K]
00:0b.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X
Bridge [1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fe100000-fe1fffff
Prefetchable memory behind bridge: 00000000fc300000-00000000fc3fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:0b.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fc801000 (64-bit, non-prefetchable) [size=4K]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
Kernel modules: amd64_edac_mod
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd64_edac
Kernel modules: amd64_edac_mod
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
01:00.0 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB
OHCI [1022:7464] (rev 0b) (prog-if 10 [OHCI])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc900000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
01:00.1 USB Controller [0c03]: Advanced Micro Devices [AMD] AMD-8111 USB
OHCI [1022:7464] (rev 0b) (prog-if 10 [OHCI])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (20000ns max)
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc901000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
01:05.0 VGA compatible controller [0300]: Trident Microsystems Blade 3D
PCI/AGP [1023:9880] (rev 3a) (prog-if 00 [VGA controller])
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fd800000 (32-bit, non-prefetchable) [size=8M]
Region 1: Memory at fc920000 (32-bit, non-prefetchable) [size=128K]
Region 2: Memory at fd000000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at fc000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel modules: tridentfb
02:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme
BCM5704 Gigabit Ethernet [14e4:1648] (rev 03)
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at fe010000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fe000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
02:02.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme
BCM5704 Gigabit Ethernet [14e4:1648] (rev 03)
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 26
Region 0: Memory at fe030000 (64-bit, non-prefetchable) [size=64K]
Region 2: Memory at fe020000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
02:04.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic
53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 08)
Subsystem: Newisys, Inc. Device [17c2:0010]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at fe050000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at fe040000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc100000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: mptspi
Kernel modules: mptspi
02:05.0 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A
U160/m [9005:00c0] (rev 01)
Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 24
BIST result: 00
Region 0: I/O ports at 2400 [disabled] [size=256]
Region 1: Memory at fe060000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fc200000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
02:05.1 SCSI storage controller [0100]: Adaptec AHA-3960D / AIC-7899A
U160/m [9005:00c0] (rev 01)
Subsystem: Adaptec AHA-3960D U160/m [9005:f620]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 25
BIST result: 00
Region 0: I/O ports at 2800 [disabled] [size=256]
Region 1: Memory at fe061000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fc220000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: aic7xxx
Kernel modules: aic7xxx
03:01.0 Fibre Channel [0c04]: QLogic Corp. ISP2312-based 2Gb Fibre
Channel to PCI-X HBA [1077:2312] (rev 02)
Subsystem: QLogic Corp. Device [1077:0101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: I/O ports at 3000 [size=256]
Region 1: Memory at fe100000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fc300000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: qla2xxx
Kernel modules: qla2xxx
03:01.1 Fibre Channel [0c04]: QLogic Corp. ISP2312-based 2Gb Fibre
Channel to PCI-X HBA [1077:2312] (rev 02)
Subsystem: QLogic Corp. Device [1077:0101]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at 3400 [size=256]
Region 1: Memory at fe101000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fc320000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: qla2xxx
Kernel modules: qla2xxx
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial
adapter
Bus 001 Device 003: ID 051d:0002 American Power Conversion
Uninterruptible Power Supply
Bus 001 Device 002: ID 050d:0237 Belkin Components F5U237 USB 2.0 7-Port Hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 6.0.1
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-openvz-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-openvz-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an
initramfs
ii linux-base 2.6.32-31 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux
kernel mo
ii vzctl 3.0.24-12 server virtualization
solution - c
Versions of packages linux-image-2.6.32-5-openvz-amd64 recommends:
ii firmware-linux-free 2.6.32-31 Binary firmware for various
driver
Versions of packages linux-image-2.6.32-5-openvz-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-openvz-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
ii firmware-qlogic 0.24~bpo50+1 Binary firmware for QLogic
IBA7220
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
Thanks,
Regards,
--
Steven Chamberlain
steven@pyro.eu.org
--- End Message ---