Your message dated Sat, 30 Apr 2011 00:45:10 +0200 with message-id <20110429224509.GA3535@pisco.westfalen.local> and subject line Re: Bug#593421: Bug not found in version 2.6.32-19 has caused the Debian Bug report #593421, regarding linux-image-2.6.32-5-amd64: fails to show anything on the LCD display with an Intel video card to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 593421: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=593421 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.32-5-amd64: fails to show anything on the LCD display with an Intel video card
- From: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
- Date: Tue, 17 Aug 2010 22:59:52 -0300
- Message-id: <201008172300.04805.perezmeyer@gmail.com>
Subject: linux-image-2.6.32-5-amd64: doesn't show anything on the LCD Package: linux-2.6 Version: 2.6.32-20 Severity: important Since upgrading to this version of this package (2.6.32-20), the LCD in my computer fails to show anything before "setting up fonts" during bootup. If I downgrade to 2.6.32-18, the LCD comes back but I have no WiFi. The video card is an Intel one. If I plug an external monitor I can see both the booting messages and X. If I set options i915 modeset=0 in /etc/modprobe.d/i915-kms.conf, the kernel will fail to boot (the LCD is turned off, and I can see blinking leds in capcslocks and another led). Regards, Lisandro. -- Package-specific info: ** Version: Linux version 2.6.32-5-amd64 (Debian 2.6.32-20) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-2) ) #1 SMP Thu Aug 12 13:01:50 UTC 2010 ** Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=20c6df14-d202-4e10-84d8-b8e87cc76569 ro quiet ** Not tainted ** Kernel log: [ 3.745413] parport_pc 00:08: disabled [ 3.796393] yenta_cardbus 0000:03:00.0: CardBus bridge found [1028:040b] [ 3.796468] yenta_cardbus 0000:03:00.0: CardBus bridge, secondary bus 0000:04 [ 3.796470] yenta_cardbus 0000:03:00.0: IO window: 0x002000-0x0020ff [ 3.796509] yenta_cardbus 0000:03:00.0: IO window: 0x002400-0x0024ff [ 3.796516] yenta_cardbus 0000:03:00.0: PREFETCH window: 0xd8000000-0xdbffffff [ 3.796522] yenta_cardbus 0000:03:00.0: MEM window: 0xd0400000-0xd07fffff [ 3.857485] Bluetooth: Core ver 2.15 [ 3.857542] NET: Registered protocol family 31 [ 3.857544] Bluetooth: HCI device and connection manager initialized [ 3.857546] Bluetooth: HCI socket layer initialized [ 3.922825] yenta_cardbus 0000:03:00.0: ISA IRQ mask 0x0000, PCI irq 18 [ 3.922875] yenta_cardbus 0000:03:00.0: Socket status: 30000006 [ 3.922879] pci_bus 0000:04: Upper limit for fixing this bridge's parent bridge: #04 [ 3.922884] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x3fff [ 3.922887] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge Memory window: 0xd0400000 - 0xd2cfffff [ 3.922889] yenta_cardbus 0000:03:00.0: pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xdbffffff [ 3.976721] cfg80211: Using static regulatory domain info [ 3.976726] cfg80211: Regulatory domain: US [ 3.976730] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3.976737] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 3.976743] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.976749] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.976755] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.976761] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 3.976767] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 3.976782] cfg80211: Calling CRDA for country: US [ 3.980669] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 3.981907] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 3.982019] usbcore: registered new interface driver btusb [ 3.983186] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.983191] ACPI: I/O resource 0000:00:1f.3 [0x7000-0x701f] conflicts with ACPI region SMBI [0x7000-0x700f] [ 3.983269] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.128345] [drm] Initialized drm 1.1.0 20060810 [ 5.128626] Error: Driver 'pcspkr' is already registered, aborting... [ 5.130491] Linux video capture interface: v2.00 [ 5.170877] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_3M (05ca:1814) [ 5.172378] input: Laptop_Integrated_Webcam_3M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input7 [ 5.172418] usbcore: registered new interface driver uvcvideo [ 5.172420] USB Video Class driver (v0.1.0) [ 6.622342] alloc irq_desc for 22 on node -1 [ 6.622345] alloc kstat_irqs on node -1 [ 6.622353] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.622399] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.680959] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks [ 6.680962] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 6.681081] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.681117] iwlagn 0000:02:00.0: setting latency timer to 64 [ 6.681263] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 6000 Series 2x2 AGN REV=0x74 [ 6.708229] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 6.708291] alloc irq_desc for 35 on node -1 [ 6.708293] alloc kstat_irqs on node -1 [ 6.708315] iwlagn 0000:02:00.0: irq 35 for MSI/MSI-X [ 6.807018] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 6.809118] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 7.053546] input: HDA Intel Mic at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 7.053654] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 7.053695] input: HDA Intel Line Out at Sep Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 7.053736] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 7.053912] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.053917] i915 0000:00:02.0: setting latency timer to 64 [ 7.063880] alloc irq_desc for 36 on node -1 [ 7.063883] alloc kstat_irqs on node -1 [ 7.063893] i915 0000:00:02.0: irq 36 for MSI/MSI-X [ 7.063898] [drm] set up 31M of stolen space [ 7.912216] Console: switching to colour frame buffer device 170x48 [ 7.914905] fb0: inteldrmfb frame buffer device [ 7.914906] registered panic notifier [ 8.070913] acpi device:42: registered as cooling_device4 [ 8.081799] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input13 [ 8.081908] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 8.081998] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 8.134573] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input14 [ 8.544426] Adding 975864k swap on /dev/sda1. Priority:-1 extents:1 across:975864k [ 8.886331] EXT3 FS on sda2, internal journal [ 9.023452] loop: module loaded [ 9.860520] kjournald starting. Commit interval 5 seconds [ 9.860887] EXT3 FS on sda3, internal journal [ 9.860895] EXT3-fs: mounted filesystem with ordered data mode. [ 10.772326] fuse init (API version 7.13) [ 11.598613] e1000e 0000:00:19.0: irq 33 for MSI/MSI-X [ 11.658323] e1000e 0000:00:19.0: irq 33 for MSI/MSI-X [ 11.659158] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.676904] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15 [ 13.232549] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX [ 13.232552] 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 13.234489] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.642904] lp: driver loaded but no devices found [ 13.670490] ppdev: user-space parallel port driver [ 14.464387] Bluetooth: L2CAP ver 2.14 [ 14.464392] Bluetooth: L2CAP socket layer initialized [ 14.479525] Bluetooth: RFCOMM TTY layer initialized [ 14.479532] Bluetooth: RFCOMM socket layer initialized [ 14.479535] Bluetooth: RFCOMM ver 1.11 [ 14.775217] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 14.775223] Bluetooth: BNEP filters: protocol multicast [ 14.944060] Bridge firewalling registered [ 15.009805] Bluetooth: SCO (Voice Link) ver 0.6 [ 15.009810] Bluetooth: SCO socket layer initialized [ 23.995187] eth0: no IPv6 routers present ** Model information sys_vendor: Dell Inc. product_name: Latitude E6510 product_version: 0001 chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: A03 board_vendor: Dell Inc. board_name: 02K3Y4 board_version: A00 ** Loaded modules: Module Size Used by sco 7209 2 bridge 39598 0 stp 1440 1 bridge bnep 9427 2 rfcomm 29581 8 l2cap 24736 16 bnep,rfcomm crc16 1319 1 l2cap acpi_cpufreq 5555 0 ppdev 5030 0 cpufreq_userspace 1992 0 cpufreq_conservative 5162 0 lp 7462 0 cpufreq_powersave 902 0 cpufreq_stats 2659 0 uinput 6376 1 fuse 50190 1 loop 11783 0 firewire_sbp2 11514 0 snd_hda_codec_intelhdmi 10695 1 arc4 1274 2 snd_hda_codec_idt 42465 1 ecb 1841 2 i915 254567 2 iwlagn 73235 0 snd_hda_intel 19987 0 iwlcore 77810 1 iwlagn drm_kms_helper 20065 1 i915 snd_hda_codec 54244 3 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel mac80211 136956 2 iwlagn,iwlcore uvcvideo 51887 0 videodev 29993 1 uvcvideo drm 142551 3 i915,drm_kms_helper v4l1_compat 11442 2 uvcvideo,videodev pcmcia 19474 0 i2c_i801 7830 0 i2c_algo_bit 4225 1 i915 btusb 9785 2 snd_pcsp 6579 0 snd_hwdep 5380 1 snd_hda_codec v4l2_compat_ioctl32 8538 1 videodev cfg80211 101464 3 iwlagn,iwlcore,mac80211 bluetooth 41827 9 sco,bnep,rfcomm,l2cap,btusb snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcsp yenta_socket 19115 1 snd_timer 15582 1 snd_pcm rfkill 13044 3 cfg80211,bluetooth rsrc_nonstatic 7294 1 yenta_socket snd 46446 8 snd_hda_codec_intelhdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_pcsp,snd_hwdep,snd_pcm,snd_timer psmouse 49777 0 video 17445 1 i915 soundcore 4598 1 snd i2c_core 15712 6 i915,drm_kms_helper,videodev,drm,i2c_i801,i2c_algo_bit parport_pc 18855 0 pcmcia_core 24118 3 pcmcia,yenta_socket,rsrc_nonstatic snd_page_alloc 6249 2 snd_hda_intel,snd_pcm serio_raw 3752 0 parport 27954 3 ppdev,lp,parport_pc evdev 7352 24 battery 4998 0 ac 2192 0 dcdbas 5048 0 output 1692 1 video wmi 4323 0 processor 30247 5 acpi_cpufreq button 4650 1 i915 ext3 106518 2 jbd 37085 1 ext3 mbcache 5050 1 ext3 sg 18744 0 sr_mod 12602 0 cdrom 29415 1 sr_mod sd_mod 29777 4 crc_t10dif 1276 1 sd_mod sdhci_pci 5581 0 ahci 32358 3 sdhci 13966 1 sdhci_pci libata 133584 1 ahci mmc_core 45472 1 sdhci firewire_ohci 19468 0 scsi_mod 122117 5 firewire_sbp2,sg,sr_mod,sd_mod,libata led_class 2433 2 iwlcore,sdhci ehci_hcd 31135 0 firewire_core 36800 2 firewire_sbp2,firewire_ohci crc_itu_t 1307 1 firewire_core e1000e 110015 0 usbcore 121943 4 uvcvideo,btusb,ehci_hcd thermal 11674 0 thermal_sys 11942 3 video,processor,thermal nls_base 6361 1 usbcore ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet dhcp ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100 link/ether 00:26:b9:eb:c0:59 brd ff:ff:ff:ff:ff:ff inet 190.193.10.9/24 brd 255.255.255.255 scope global eth0 inet6 fe80::226:b9ff:feeb:c059/64 scope link valid_lft forever preferred_lft forever 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:27:10:18:21:00 brd ff:ff:ff:ff:ff:ff 4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN link/ether 32:d4:83:df:8f:ff brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 560 8 0 0 0 0 0 0 560 8 0 0 0 0 0 0 eth0: 1030683 16306 0 0 0 0 0 0 42989 332 0 0 0 0 0 0 wlan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: 614 total packets received 2 with invalid addresses 0 forwarded 0 incoming packets discarded 612 incoming packets delivered 331 requests sent out Icmp: 0 ICMP messages received 0 input ICMP message failed. ICMP input histogram: 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: Tcp: 3 active connections openings 1 passive connection openings 0 failed connection attempts 0 connection resets received 1 connections established 495 segments received 309 segments send out 0 segments retransmited 0 bad segments received. 55 resets sent Udp: 117 packets received 0 packets to unknown port received. 0 packet receive errors 22 packets sent UdpLite: TcpExt: 4 delayed acks sent 2 packets directly queued to recvmsg prequeue. 124 packet headers predicted 28 acknowledgments not containing data payload received 202 predicted acknowledgments IpExt: InBcastPkts: 95 InOctets: 80759 OutOctets: 37833 InBcastOctets: 31918 *** Device features: eth0: 0x9a9 lo: 0x13865 pan0: 0xff3865 wlan0: 0x2000 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02) Subsystem: Dell Device [1028:040b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:040b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 36 Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 70b0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06) Subsystem: Dell Device [1028:040b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at d69b0000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:16.3 Serial controller [0700]: Intel Corporation 5 Series/3400 Series Chipset KT Controller [8086:3b67] (rev 06) (prog-if 02 [16550]) Subsystem: Dell Device [1028:040b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at 70a0 [size=8] Region 1: Memory at d6990000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 05) Subsystem: Dell Device [1028:040b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 33 Region 0: Memory at d6900000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at d6980000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 7040 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:040b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d6970000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05) Subsystem: Dell Device [1028:040b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at d6960000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: d5500000-d68fffff Prefetchable memory behind bridge: 00000000bc100000-00000000bc2fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: d4100000-d54fffff Prefetchable memory behind bridge: 00000000bc300000-00000000bc4fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: d0400000-d2cfffff Prefetchable memory behind bridge: 00000000d8000000-00000000dbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=0a, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: d2d00000-d40fffff Prefetchable memory behind bridge: 00000000bc500000-00000000bc6fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:040b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: Memory at d6950000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b07] (rev 05) Subsystem: Dell Device [1028:040b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 RAID bus controller [0104]: Intel Corporation Mobile 82801 SATA RAID Controller [8086:282a] (rev 05) Subsystem: Dell Device [1028:040b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 34 Region 0: I/O ports at 7090 [size=8] Region 1: I/O ports at 7080 [size=4] Region 2: I/O ports at 7070 [size=8] Region 3: I/O ports at 7060 [size=4] Region 4: I/O ports at 7020 [size=32] Region 5: Memory at d6940000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) Subsystem: Dell Device [1028:040b] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at d6930000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 7000 [size=32] 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05) Subsystem: Dell Device [1028:040b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 10 Region 0: Memory at d6920000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> 02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6200 [8086:422c] (rev 35) Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN [8086:1321] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 35 Region 0: Memory at d4100000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlagn 03:00.0 CardBus bridge [0607]: Ricoh Co Ltd Device [1180:e476] (rev 02) Subsystem: Dell Device [1028:040b] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 18 Region 0: Memory at d2c40000 (32-bit, non-prefetchable) [size=4K] Bus: primary=03, secondary=04, subordinate=07, sec-latency=176 Memory window 0: d8000000-dbfff000 (prefetchable) Memory window 1: d0400000-d07ff000 I/O window 0: 00002000-000020ff I/O window 1: 00002400-000024ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 03:00.1 SD Host controller [0805]: Ricoh Co Ltd Device [1180:e822] (rev 03) (prog-if 01) Subsystem: Dell Device [1028:040b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at d2c30000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci 03:00.4 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd Device [1180:e832] (rev 03) (prog-if 10 [OHCI]) Subsystem: Dell Device [1028:040b] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 16 Region 0: Memory at d2c00000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 002 Device 004: ID 0a5c:5800 Broadcom Corp. BCM5880 Secure Applications Processor Bus 002 Device 003: ID 413c:8187 Dell Computer Corp. DW375 Bluetooth Module Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 05ca:1814 Ricoh Co., Ltd HD Webcam Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-amd64 depends on: ii debconf [debconf-2.0] 1.5.33 Debian configuration management sy ii initramfs-tools [linux-initra 0.97.2 tools for generating an initramfs ii linux-base 2.6.32-20 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.32-5-amd64 recommends: ii firmware-linux-free 2.6.32-18 Binary firmware for various driver Versions of packages linux-image-2.6.32-5-amd64 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-amd64 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) ii firmware-iwlwifi 0.26 Binary firmware for Intel Wireless ii firmware-linux 0.26 Binary firmware for various driver ii firmware-linux-nonfree 0.26 Binary firmware for various driver pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64: linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:Attachment: signature.asc
Description: This is a digitally signed message part.
--- End Message ---
--- Begin Message ---
- To: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
- Cc: 593421-done@bugs.debian.org
- Subject: Re: Bug#593421: Bug not found in version 2.6.32-19
- From: Moritz Mühlenhoff <jmm@inutil.org>
- Date: Sat, 30 Apr 2011 00:45:10 +0200
- Message-id: <20110429224509.GA3535@pisco.westfalen.local>
- In-reply-to: <BANLkTimpeSabSj+TkB2oBkS6EsCV58OPAA@mail.gmail.com>
- References: <201009212347.06578.perezmeyer@gmail.com> <201009262312.17863.perezmeyer@gmail.com> <20110423192233.GA4458@pisco.westfalen.local> <201104251233.08885.perezmeyer@gmail.com> <BANLkTinhDZG=PPGWWNdNAnytQVQ5PoNswA@mail.gmail.com> <BANLkTimpeSabSj+TkB2oBkS6EsCV58OPAA@mail.gmail.com>
Version: 2.6.38-3 On Thu, Apr 28, 2011 at 07:29:36PM -0300, Lisandro Damián Nicanor Pérez Meyer wrote: > Works with current kernel in testing :-) > > Kinds regards, Lisandro. Thanks for the feedback. Closing the bug, then. Cheers, Moritz
--- End Message ---