--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: rt2860: rt2860 doesn't connect to WPA2 networks
- From: Miguel Angel Fraile <oldmike@gmail.com>
- Date: Thu, 13 May 2010 14:31:34 +0200
- Message-id: <20100513123134.2703.35064.reportbug@EeePC>
Package: linux-2.6
Version: 2.6.32-5
Severity: important
File: rt2860
It seems it's not possible to connect to WPA2 wireless networks with the squeezix version of the rt2860 module.
I've tested it with both network-manager and wicd. Both of them are unable to authenticate with the correct password.
Both have NO problems to connect to WPA-PSK networks.
Tested with a Buffalo WZR-HP-G300NH router. No problem connecting to that WPA2 network with other devices.
The router encryption is set to WPA/WPA2-Mixed TKIP+AES, using a preshared key.
Tested also after updating the rt2860 firmware-ralink to the Debian SID version (v0.24). No luck, either.
-- Package-specific info:
** Version:
Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
** Command line:
root=/dev/sda2
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 37.592358] domain 0: span 0-1 level SIBLING
[ 37.592370] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 37.592399] domain 1: span 0-1 level MC
[ 37.592412] groups: 0-1 (cpu_power = 1178)
[ 38.332372] integrated sync not supported
[ 38.485552] integrated sync not supported
[ 38.628599] integrated sync not supported
[ 102.927298] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 103.092088] RX DESC f6392000 size = 2048
[ 103.092669] <-- RTMPAllocTxRxRingMemory, Status=0
[ 103.096998] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 103.097024] 1. Phy Mode = 0
[ 103.097031] 2. Phy Mode = 0
[ 103.118425] RTMPSetPhyMode: channel is out of range, use first channel=1
[ 103.124896] 3. Phy Mode = 0
[ 103.129534] MCS Set = 00 00 00 00 00
[ 103.131161] <==== RTMPInitialize, Status=0
[ 103.131236] 0x1300 = 00073200
[ 113.752162] wlan0: no IPv6 routers present
[ 157.719928] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 479
[ 194.623011] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 194.634711] RX DESC f6392000 size = 2048
[ 194.635424] <-- RTMPAllocTxRxRingMemory, Status=0
[ 194.639958] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 194.639974] 1. Phy Mode = 0
[ 194.639981] 2. Phy Mode = 0
[ 194.668230] 3. Phy Mode = 0
[ 194.672891] MCS Set = 00 00 00 00 00
[ 194.674519] <==== RTMPInitialize, Status=0
[ 194.674595] 0x1300 = 000a4260
[ 195.053307] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 195.053485] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 195.054063] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 195.054537] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 195.142556] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 195.158459] RX DESC f661d000 size = 2048
[ 195.159166] <-- RTMPAllocTxRxRingMemory, Status=0
[ 195.167205] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 195.167221] 1. Phy Mode = 0
[ 195.167229] 2. Phy Mode = 0
[ 195.195907] 3. Phy Mode = 0
[ 195.200554] MCS Set = 00 00 00 00 00
[ 195.202229] <==== RTMPInitialize, Status=0
[ 195.202306] 0x1300 = 000a4260
[ 197.569091] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 197.648862] ===>rt_ioctl_giwscan. 1(1) BSS returned, data->length = 170
[ 197.649496] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 205.812139] eth0: no IPv6 routers present
[ 205.980160] wlan0: no IPv6 routers present
[ 207.662726] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 376
[ 207.663032] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 217.670142] ===>rt_ioctl_giwscan. 3(3) BSS returned, data->length = 376
[ 217.670444] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 227.682863] ===>rt_ioctl_giwscan. 4(4) BSS returned, data->length = 479
[ 227.683174] ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
[ 233.250889] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 233.264040] RX DESC f63ad000 size = 2048
[ 233.264793] <-- RTMPAllocTxRxRingMemory, Status=0
[ 233.268723] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 233.268735] 1. Phy Mode = 0
[ 233.268740] 2. Phy Mode = 0
[ 233.296695] 3. Phy Mode = 0
[ 233.301337] MCS Set = 00 00 00 00 00
[ 233.302960] <==== RTMPInitialize, Status=0
[ 233.303035] 0x1300 = 000a4260
[ 233.579715] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 233.579926] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 233.580565] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 233.581217] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 243.988150] eth0: no IPv6 routers present
[ 266.659913] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 266.672411] RX DESC f6333000 size = 2048
[ 266.672991] <-- RTMPAllocTxRxRingMemory, Status=0
[ 266.677377] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 266.677389] 1. Phy Mode = 0
[ 266.677395] 2. Phy Mode = 0
[ 266.705257] 3. Phy Mode = 0
[ 266.709891] MCS Set = 00 00 00 00 00
[ 266.711516] <==== RTMPInitialize, Status=0
[ 266.711591] 0x1300 = 000a4260
[ 266.757927] rt2860 0000:01:00.0: firmware: requesting rt2860.bin
[ 266.770206] RX DESC f6685000 size = 2048
[ 266.770781] <-- RTMPAllocTxRxRingMemory, Status=0
[ 266.774689] --> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
[ 266.774706] 1. Phy Mode = 0
[ 266.774713] 2. Phy Mode = 0
[ 266.802662] 3. Phy Mode = 0
[ 266.807312] MCS Set = 00 00 00 00 00
[ 266.808939] <==== RTMPInitialize, Status=0
[ 266.809036] 0x1300 = 000a4260
[ 267.075685] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 267.075897] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 267.076535] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 267.077184] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 267.253971] ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
[ 267.254180] ATL1E 0000:03:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 267.254813] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 267.255463] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 277.381066] wlan0: no IPv6 routers present
[ 277.540150] eth0: no IPv6 routers present
** Model information
not available
** Loaded modules:
Module Size Used by
i915 217023 2
drm_kms_helper 17183 1 i915
drm 107507 3 i915,drm_kms_helper
i2c_algo_bit 3497 1 i915
ppdev 4058 0
lp 5570 0
parport 22554 2 ppdev,lp
sco 5837 2
bridge 32851 0
stp 996 1 bridge
bnep 7376 2
rfcomm 25063 0
l2cap 21677 6 bnep,rfcomm
bluetooth 36259 6 sco,bnep,rfcomm,l2cap
loop 9721 0
snd_hda_codec_realtek 162851 1
snd_hda_intel 15263 0
joydev 6771 0
snd_hda_codec 45998 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
uvcvideo 45194 0
snd_pcm 47350 2 snd_hda_intel,snd_hda_codec
videodev 25445 1 uvcvideo
snd_seq 35303 0
v4l1_compat 10250 2 uvcvideo,videodev
rt2860sta 378387 1
eeepc_laptop 9355 0
snd_timer 12258 2 snd_pcm,snd_seq
i2c_core 12612 4 i915,drm,i2c_algo_bit,videodev
snd_seq_device 3673 1 snd_seq
rfkill 10196 4 bluetooth,eeepc_laptop
crc_ccitt 1039 1 rt2860sta
ac 1640 0
battery 3782 0
snd 33551 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
rng_core 2178 0
processor 25803 2
soundcore 3450 1 snd
psmouse 44409 0
pci_hotplug 18065 1 eeepc_laptop
snd_page_alloc 4977 2 snd_hda_intel,snd_pcm
serio_raw 2916 0
evdev 5609 24
ext4 254301 1
mbcache 3762 1 ext4
jbd2 55835 1 ext4
crc16 1027 2 l2cap,ext4
sd_mod 25717 2
crc_t10dif 1012 1 sd_mod
ata_generic 2015 0
ide_pci_generic 1924 0
ide_core 63850 1 ide_pci_generic
uhci_hcd 15953 0
ata_piix 16513 1
ehci_hcd 27230 0
libata 113728 2 ata_generic,ata_piix
intel_agp 20145 1
video 14605 1 i915
atl1e 23008 0
scsi_mod 101073 2 sd_mod,libata
usbcore 97930 4 uvcvideo,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
output 1204 1 video
agpgart 19516 2 drm,intel_agp
button 3598 1 i915
thermal 9206 0
fan 2586 0
thermal_sys 9378 4 processor,video,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
Subsystem: ASUSTeK Computer Inc. Device [1043:8340]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:831a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 40000000-401fffff
Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-fbefffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:830f]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 Network controller [0280]: RaLink RT2860 [1814:0781]
Subsystem: RaLink Device [1814:2790]
Physical Slot: eeepc-wifi
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fbef0000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2860
03:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
Subsystem: ASUSTeK Computer Inc. Device [1043:8324]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: ATL1E
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-trunk-686 depends on:
ii debconf [debconf-2.0] 1.5.28 Debian configuration management sy
ii initramfs-tools [linux-initr 0.93.4 tools for generating an initramfs
ii module-init-tools 3.12~pre1-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-trunk-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.10.2-2 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.32-trunk-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-trunk-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.24 Binary firmware for Ralink RT2561,
-- debconf information:
linux-image-2.6.32-trunk-686/prerm/would-invalidate-boot-loader-2.6.32-trunk-686: true
linux-image-2.6.32-trunk-686/postinst/missing-firmware-2.6.32-trunk-686:
linux-image-2.6.32-trunk-686/postinst/bootloader-test-error-2.6.32-trunk-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-trunk-686/postinst/depmod-error-initrd-2.6.32-trunk-686: false
linux-image-2.6.32-trunk-686/prerm/removing-running-kernel-2.6.32-trunk-686: true
linux-image-2.6.32-trunk-686/postinst/bootloader-error-2.6.32-trunk-686:
--- End Message ---