Package: linux-2.6
Version: 2.6.32-26
Severity: normal
A recent version of kernel image has this problem. I can't access my sd-card reader var usb interface,
while some days ago I can use it. And I can use this sd-card reader on the same mache on a relative
old 32bit debian system now.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-26) (
dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Oct 20 00:05:22 UTC 2010
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=ee72bbef-4ce3-4259-9445-e91402e395e3 ro quiet
** Not tainted
** Kernel log:
[ 33.965254] domain 0: span 1,3 level SIBLING
[ 33.965258] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[ 33.965267] domain 1: span 0-3 level MC
[ 33.965271] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 33.965284] CPU2 attaching sched-domain:
[ 33.965288] domain 0: span 0,2 level SIBLING
[ 33.965292] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[ 33.965302] domain 1: span 0-3 level MC
[ 33.965306] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 33.965319] CPU3 attaching sched-domain:
[ 33.965323] domain 0: span 1,3 level SIBLING
[ 33.965328] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[ 33.965336] domain 1: span 0-3 level MC
[ 33.965339] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 33.966249] CPU0 attaching NULL sched-domain.
[ 33.966256] CPU1 attaching NULL sched-domain.
[ 33.966260] CPU2 attaching NULL sched-domain.
[ 33.966265] CPU3 attaching NULL sched-domain.
[ 34.005211] CPU0 attaching sched-domain:
[ 34.005217] domain 0: span 0,2 level SIBLING
[ 34.005221] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[ 34.005230] domain 1: span 0-3 level MC
[ 34.005233] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 34.005244] CPU1 attaching sched-domain:
[ 34.005247] domain 0: span 1,3 level SIBLING
[ 34.005250] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[ 34.005258] domain 1: span 0-3 level MC
[ 34.005261] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 34.005270] CPU2 attaching sched-domain:
[ 34.005273] domain 0: span 0,2 level SIBLING
[ 34.005276] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[ 34.005284] domain 1: span 0-3 level MC
[ 34.005287] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 34.005295] CPU3 attaching sched-domain:
[ 34.005298] domain 0: span 1,3 level SIBLING
[ 34.005302] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[ 34.005309] domain 1: span 0-3 level MC
[ 34.005312] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 37.512077] eth1: no IPv6 routers present
[ 71.688030] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 71.688037] vboxdrv: Successfully done.
[ 71.688041] vboxdrv: Found 4 processor cores.
[ 71.688125] VBoxDrv: dbg - g_abExecMemory=ffffffffa051e6c0
[ 71.688242] vboxdrv: fAsync=0 offMin=0x439 offMax=0x41cc
[ 71.688792] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 71.688798] vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
[ 85.605583] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 95.257728] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[ 103.199409] device eth1 entered promiscuous mode
[ 125.642606] teredo: no IPv6 routers present
[ 1962.482826] lo: Disabled Privacy Extensions
[ 2008.034681] device eth1 left promiscuous mode
[ 4525.852346] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 4525.985508] usb 2-2: New USB device found, idVendor=0420, idProduct=1307
[ 4525.985512] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4525.985516] usb 2-2: Product: USB Reader
[ 4525.985518] usb 2-2: Manufacturer: ChipsBar
[ 4525.985520] usb 2-2: SerialNumber: 110074973765
[ 4525.985667] usb 2-2: configuration #1 chosen from 1 choice
[ 4526.167291] Initializing USB Mass Storage driver...
[ 4526.167550] scsi8 : SCSI emulation for USB Mass Storage devices
[ 4526.167750] usb-storage: device found at 2
[ 4526.167754] usb-storage: waiting for device to settle before scanning
[ 4526.167771] usbcore: registered new interface driver usb-storage
[ 4526.167777] USB Mass Storage support registered.
[ 4541.160941] usb-storage: device scan complete
[ 4562.761988] usb 2-2: reset high speed USB device using ehci_hcd and address 2
[ 4567.885050] usb 2-2: device descriptor read/64, error -71
[ 4573.103346] usb 2-2: device descriptor read/64, error -71
[ 4573.319025] usb 2-2: reset high speed USB device using ehci_hcd and address 2
[ 4578.437594] usb 2-2: device descriptor read/64, error -71
[ 4583.660129] usb 2-2: device descriptor read/64, error -71
[ 4583.876069] usb 2-2: reset high speed USB device using ehci_hcd and address 2
[ 4589.286550] usb 2-2: device not accepting address 2, error -71
[ 4589.398520] usb 2-2: reset high speed USB device using ehci_hcd and address 2
[ 4594.809000] usb 2-2: device not accepting address 2, error -71
[ 4594.809061] scsi 8:0:0:0: Device offlined - not ready after error recovery
[ 4594.809087] usb 2-2: USB disconnect, address 2
[ 4594.920921] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 4600.039795] usb 2-2: device descriptor read/64, error -71
[ 4605.262563] usb 2-2: device descriptor read/64, error -71
[ 4605.478465] usb 2-2: new high speed USB device using ehci_hcd and address 4
[ 4610.596572] usb 2-2: device descriptor read/64, error -71
[ 4615.819107] usb 2-2: device descriptor read/64, error -71
[ 4616.035049] usb 2-2: new high speed USB device using ehci_hcd and address 5
[ 4621.445504] usb 2-2: device not accepting address 5, error -71
[ 4621.557991] usb 2-2: new high speed USB device using ehci_hcd and address 6
[ 4626.967980] usb 2-2: device not accepting address 6, error -71
[ 4626.967999] hub 2-0:1.0: unable to enumerate USB device on port 2
[ 4627.235893] usb 6-2: new full speed USB device using uhci_hcd and address 2
[ 4632.354980] usb 6-2: device descriptor read/64, error -71
[ 4637.576960] usb 6-2: device descriptor read/64, error -71
[ 4637.792957] usb 6-2: new full speed USB device using uhci_hcd and address 3
[ 4642.911509] usb 6-2: device descriptor read/64, error -71
[ 4648.134026] usb 6-2: device descriptor read/64, error -71
[ 4648.349984] usb 6-2: new full speed USB device using uhci_hcd and address 4
[ 4653.756478] usb 6-2: device not accepting address 4, error -71
[ 4653.868434] usb 6-2: new full speed USB device using uhci_hcd and address 5
[ 4659.279609] usb 6-2: device not accepting address 5, error -71
[ 4659.279628] hub 6-0:1.0: unable to enumerate USB device on port 2
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: H55M-UD2H
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: F8
board_vendor: Gigabyte Technology Co., Ltd.
board_name: H55M-UD2H
board_version: x.x
** Loaded modules:
Module Size Used by
usb_storage 39561 0
nls_utf8 1208 1
nls_cp437 5817 1
vfat 7884 1
fat 40038 1 vfat
vboxnetadp 4193 0
vboxnetflt 12525 0
vboxdrv 1723735 2 vboxnetadp,vboxnetflt
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7209 2
bnep 9427 2
rfcomm 29597 0
l2cap 24736 6 bnep,rfcomm
bluetooth 41827 6 sco,bnep,rfcomm,l2cap
rfkill 13044 3 bluetooth
acpi_cpufreq 5555 0
cpufreq_conservative 5162 0
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
cpufreq_powersave 902 0
tun 10844 2
binfmt_misc 6431 1
fuse 50273 7
jfs 140105 1
loop 11799 0
dm_crypt 10664 0
dm_mod 53770 1 dm_crypt
i915 254567 2
snd_hda_codec_intelhdmi 10695 1
drm_kms_helper 20065 1 i915
drm 142343 3 i915,drm_kms_helper
snd_hda_codec_realtek 235538 1
i2c_i801 7830 0
i2c_algo_bit 4225 1 i915
pcspkr 1699 0
evdev 7352 11
snd_hda_intel 19987 1
i2c_core 15712 5 i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
snd_hda_codec 54244 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5380 1 snd_hda_codec
snd_pcm_oss 32591 0
snd_mixer_oss 12606 1 snd_pcm_oss
snd_pcm 60503 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_midi 4400 0
snd_rawmidi 15515 1 snd_seq_midi
snd_seq_midi_event 4628 1 snd_seq_midi
snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event
snd_timer 15582 2 snd_pcm,snd_seq
snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq
button 4650 1 i915
video 17445 1 i915
processor 30303 5 acpi_cpufreq
snd 46446 14 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
output 1692 1 video
soundcore 4598 1 snd
snd_page_alloc 6249 2 snd_hda_intel,snd_pcm
ext4 289033 2
mbcache 5050 1 ext4
jbd2 67015 1 ext4
crc16 1319 2 l2cap,ext4
sd_mod 29777 9
crc_t10dif 1276 1 sd_mod
usbhid 33292 0
ata_generic 3015 0
hid 62857 1 usbhid
uhci_hcd 18521 0
pata_jmicron 2280 4
firewire_ohci 19468 0
firewire_core 36800 1 firewire_ohci
ahci 32374 3
r8169 28909 0
libata 133616 3 ata_generic,pata_jmicron,ahci
via_rhine 17371 0
crc_itu_t 1307 1 firewire_core
ehci_hcd 31135 0
mii 3210 2 r8169,via_rhine
scsi_mod 122117 3 usb_storage,sd_mod,libata
thermal 11674 0
usbcore 121938 5 usb_storage,usbhid,uhci_hcd,ehci_hcd
nls_base 6377 6 nls_utf8,nls_cp437,vfat,fat,jfs,usbcore
thermal_sys 11942 3 video,processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0040] (rev 12)
Subsystem: Giga-byte Technology Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0042] (rev 12) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 34
Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ff00 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:16.0 Communication controller [0780]: Intel Corporation 5 Series/3400 Series Chipset HECI Controller [8086:3b64] (rev 06)
Subsystem: Giga-byte Technology Device [1458:3b64]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fbfff000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b3b] (rev 06) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at fe00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b3e] (rev 06) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at fd00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b3f] (rev 06) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at fc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fbff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 74000000-741fffff
Prefetchable memory behind bridge: 0000000074200000-00000000743fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 0000000074400000-00000000745fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbc00000-fbcfffff
Prefetchable memory behind bridge: 00000000fbb00000-00000000fbbfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b36] (rev 06) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at fb00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b37] (rev 06) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at fa00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b38] (rev 06) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f900 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 0000000074600000-00000000746fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b06] (rev 06)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 06) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 33
Region 0: I/O ports at f800 [size=8]
Region 1: I/O ports at f700 [size=4]
Region 2: I/O ports at f600 [size=8]
Region 3: I/O ports at f500 [size=4]
Region 4: I/O ports at f400 [size=32]
Region 5: Memory at fbffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06)
Subsystem: Giga-byte Technology Device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbffb000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
Kernel driver in use: i801_smbus
02:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368] (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at df00 [size=8]
Region 1: I/O ports at de00 [size=4]
Region 2: I/O ports at dd00 [size=8]
Region 3: I/O ports at dc00 [size=4]
Region 4: I/O ports at db00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: I/O ports at ee00 [size=256]
Region 2: Memory at fbbff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fbbf8000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at fbb00000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:02.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] [1106:3106] (rev 86)
Subsystem: D-Link System Inc DFE-530TX rev C [1186:1403]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ce00 [size=256]
Region 1: Memory at fbdff000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 74600000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: via-rhine
04:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbdfe000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fbdf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c040 Logitech, Inc. Corded Tilt-Wheel Mouse
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=zh_CN.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.5 tools for generating an initramfs
ii linux-base 2.6.32-26 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-26 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
ii firmware-ralink 0.27 Binary firmware for Ralink wireles
pn xen-hypervisor <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
* linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64: