[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#599021: eth0 stops working after a bit of traffic

On Mon, 2010-10-04 at 00:01 +0200, karl156 wrote:
> > Please send the output of 'lspci -vnn'.  And in future, use reportbug to
> > send bug reports, as this will gather that information automatically.
> >
> > Ben.
> >
> 01:02.0 Ethernet controller [0200]: D-Link System Inc DL2000-based
> Gigabit Ethernet [1186:4000] (rev 0c)
>         Subsystem: D-Link System Inc DL2000-based Gigabit Ethernet
> [1186:4000]
>         Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 23
>         I/O ports at b400 [size=256]
>         Memory at ff0fbc00 (32-bit, non-prefetchable) [size=512]
>         Expansion ROM at ff0e0000 [disabled] [size=64K]
>         Capabilities: [50] Power Management version 2
>         Kernel driver in use: dl2k

OK, you have a device which should be handled by dl2k not ipg.  The fix
for this is simple and will be included in the next upload to unstable.
As a workaround until then, you can blacklist the ipg driver.


Ben Hutchings
Once a job is fouled up, anything done to improve it makes it worse.

Attachment: signature.asc
Description: This is a digitally signed message part

Reply to: